Intresting and critical scenarios in sd

can anybody send me interesting and critical scenarios in sd.my mail id <b><REMOVED BY MODERATOR></b>it is very urgent.
I'll reward max points

Hello smitha,
Go thriugh this link.
<a href="http://help.sap.com/saphelp_ides/helpdata/en/e6/4a86da9e0311d189b70000e829fbbd/frameset.htm">http://help.sap.com/saphelp_ides/helpdata/en/e6/4a86da9e0311d189b70000e829fbbd/frameset.htm</a>
it will definitely help you.
@please award pts.
Regards,
Nisha

Similar Messages

Component material to be used for both MTO and MTS scenario

Hello All,
What is the setting required at IMG or at Master data level, in order to use the component for both MTO and MTS scenario.
Detail description of problem:
In the system already MTS process is exist. And now business wants MTO scenario, in order to have sales order specific stock.
So i have made the necessary configuration in requirement class (special stock - E in account assignment field) and the basic requirement is working fine. Meaning when i create prodcution order manually using transaction CO08 with reference to sales order i am able to create it. And no problem in executing GR for the prodcution order. Also noticed that after GR the stock is under the salesorder created.
But the problem is when i try to do the goods issue for the component to the prodcution order, system is expecting sales order specific stock for components too.
But business wants to use components from unrestricted stock as of Make to stock scenario.
Please guide me how to achieve this? This is critical to business so expecing quick recommendations from experts.
Best Regards,
Krish

HI
For your component if you dont set indi/collective requirement indicator as 2 collective reqmt MRP 4 view then only system will not allow you to use r special stock E for sales order
if you want to make all stock avaliable and PR and PO not sales order wise then maintain above indicator as 2 in MRP4 view.
Regards
Anupam Sharma

Rbdstate - Send ALEaudit in time critical scenario

Hy all,
how can I use RBDSTATE report to send Acknowledge IDOC to my XI 7.0 server in a time critical scenario? I use Ack IDOCs in a time critical complex BPM that attends audit to continue with the following steps of transformation and send xml messages to ERP.
Problem is that an OSS note says to schedul job RBDTSATE with a time period higher 5 minutes; this time is too high for us (BPM contain more steps that needs an ERP ack).
How can I solve this issue to simplify and make more fast the BPM?
Thanks in advance,
Marco

Hi Chris,
Is the "subVI" in question really a subVI of the higher-priority VI? If yes, that would make it run at higher-priority as well -- probably not what you want to do.
See this for further details: http://digital.ni.com/public.nsf/allkb/D7E975105812F0C586256A6B005B4957
I would keep the two VIs separate (to keep their priorities separate) and transfer data via LV2-style globals between them.
-Khalid

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox

Will there be a fix for Firefox's problems with Hotmail. I have gone back to 3.5.9 but mostly I am disappointed by the lack of action on this serious problem where a major and critical feature of a major international website is unavailable in the Firefox browser.
== URL of affected sites ==
http://www.hotmail.com

We've reached out to the Hotmail team and they've determined that this is a bug in their code. (It was masked by a timing issue in 3.5 that was fixed in 3.6.) We've worked with them to develop a fix but they may not have deployed it yet.

Hard drive and critical error messages

Hello, I have suddenly rec'd numerous hard drive errors "hard drive doesn't respond to system commands" and critical error messages "damaged hard drive clusters detected. private data is at risk." "system has detected a problem with one or more installed IDE/SATA hard disks" along with other error messages. I have a toshiba satellite A505 over a year old and never had a problem until now. Was just surfing the web on a retail site and started getting all these pop-ups. desktop is missing most icons, favorite list gone. not computer savvy when it somes to figuring the error messages out. Any help appreciated. Should I take it in somewhere to get fixed? Please help.
Thank You.

not computer savvy when it somes to figuring the error messages out. ... Should I take it in somewhere to get fixed?
Yes, Katy. Be sure to back up all your important files. The machine you get back will most likely have all of your pictures, Xmas cards, favorites, contacts and so forth missing.
Locate a Toshiba Service Center
-Jerry

Oracle BPM / SOA Suite and Big and Complex Scenarios

Hi people,
I have worked for a company that in the past chose Oracle BPM (ALBPM at the time) and one of the big problems that the company had was in relation about big processes and complex scenarios.
This company is for the e-commerce area and our processes can have many instances at the same time, for example, a process to all the "order flow" can have thousands, maybe millions instances at the same time.
So we choose to abort the BPMS option in the past and now we back to talk again about BPMS and one question is always made by the company board: if we use BPM again, the new versions can be support all the our volume data?
To be honestly, I don't have this answer so I like to know if any people here has a paper or report about Oracle BPM 11g and big scenarios with many instances. If anybody has a case too, it will be relevant.
Another and the final question: how does the oracle bpm engine treats the case when my engine reboots and before that the engine had many instances active? The istances will be lost?

11g ADF is not certified with 10g SOA Suite. What I mean by this is that your 11g ADF will need to run on WLS 10.3.1 and SOA Suite 10g will eith run on oc4j or WLS 9.2.
ADF is just JDeveloper, you deploy to WLS 11g (10.3.1).
This is the most detailed 10g SOA Suite guide I know for 10g
http://download.oracle.com/docs/cd/E10291_01/core.1013/e10294/toc.htm
note that it is for 10.1.3.3, you just need to subsitute for 10.1.3.5 (latest release)
cheers
James

Resource Related Billing: Time and Material Scenario

Can we use internal resource time through CATS for Resource Related Billing: Time and Material Scenario instead of external time of resources through service entry sheet

Yes you can
Please read sap help for more details

RAR: SoD Riskk and Critical Actions risks

Hi all,
I would like to get your input regarding different approaches followed in order to load in RAR SoD risk and critical actions risks.
1) Do you load all of them under the same rule set?
2) Do you think is convenient to load them under two different rule sets? One for SoD and the other for critical action?
My decision here since AC modules when calling to RAR are using the default SoD, would be to define everything under the same unique rule set. Agree on that?
Keep in mind the four GRC AC modules are implemented.
Thanks for all. Kind regards,
Imanol

Hi Imanol,
It depends on the client requirements. If client wants to see critical risks as well as SoD risks in CUP then same ruleset is the way to go. If client doesn't want to confuse approvers by showing critical risks then separate ruleset is the right way. At my current client, we have separate rulesets for SoD and Critical actions. We ask role owners to reaffirm all the role assignment which contains critical actions quarterly so we are covered from that angle.
Regards,
Alpesh

Central Contract, MDM Catalog, and classic scenario

Dear SAP experts,
We are in SRM 7.01 with backend ECC 6.05 deploying classic scenario. We are using Central Contract Management in which we negotiate contract in SRM and later distribute it to ECC. We also plan to use SRM-MDM Catalog.
We notice that if we are using classic scenaro, the contract that is used as reference is the contract number in ECC (the one distributed from SRM). So at first we assume that if we want to push the contract data to MDM, we should have pushed the ECC Contract number. However we find out that actually SAP block the ECC Contract coming as distribution from SRM to go to MDM.
Our second option is to use distribution of contract from SRM to catalog. It does using SRM contract number. We create SC and then we pull the catalog item from the catalog (which contain SRM contract number) and then we order. However we end up with 'error in process' in which the system try to create a PR instead in the ECC (meaning that the contract number cannot be read).
We're puzzled with this. How can we use the combination of central contract, MDM catalog and classic scenario? Can we use the combination?
Best regards,
John

Maria
If you want the contracts to be in SRM and do not want them to send to Backend, then check this out.
Create a Vendor list for those items in SRM by assigning the local contracts to the vendors.Activate Vendor list for sourcing.
Then local contract data should pick as SOS from the vendor list.
If you can create contracts in Backend for stock material then SC would pick the backend contract as SOS in classic scenario.
Let me know if the above works or not.
PS : Reward points if helpful.
Regards
Jagadish

Can you explain steps in the Async and Sync scenarios JDBC to RFC.

Hi,
Can you explain some basic steps in the Async and Sync scenarios for sending data from JDBC to RFC.
Like,
The data is picked up from the database table through JDBC adapter.
It is passed on to SAP by calling the RFC. RFC gets executed
successfully. The status is returned by the RFC. The status needs to be
updated back into the SQL database table.
Is this a sync case or async case.
What si the diffrences in the sync and async scenarios in the above JDBC to RFC scenarios.
Soorya

hi check the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5474f19e-0701-0010-4eaa-97c4f78dbf9b
JDBC Synchronous call using BPM
Data Types -
1) File Input
2) JDBC Req
3) JDBC Response
4) File Response of similar type of JDBC Response.. ( This you can avoid also..let it be for first time)
Message Types
4 for each data type
Message Interfaces
1) Async, Outbound, Interface, to receieve the file
2) Async, Inbound , Interface to send the file from XI
3) Async, Absract , Interface of type File message type to recieve the message in the BPM
4) Sync, Abstract Interface with Req message type as File Request, and Response Message type as a file Response
5) Sync , Inbound interface for JDBC with Input message type as a JDBC Request and Output Message type as a JDBC Response
Message Mapping:
1)Mapping between File Req to the JDBC req
2) JDBC Response to File Response
Interface mapping:
1) Sender Interface as a Sync,Abstract Interface created for the file type and target interface as Synchrnous JDBC interface.
Use corresponding mapping for Req and Resp..
note:reward points if solution found helpfull.....
regards
chandrakanth.k

What role of sd functional consultant in ale and idoc scenarios

Hi friends,
I am sd consultant having worked for indian support projects and implementaiton project. i do not have idea of ALE and IDOC scenarios. Now i am on foreign offshore support project where they asked for ALE AND IDOC knowledge. please guide me how to go ahead and please inform what role and responsibilities should have. i heard support may be for order management and delivery from sd module
please give me details steps and T.codes.
Regards,
Veeresh

hi
<a href="http://help.sap.com/saphelp_470/helpdata/en/0b/2a6695507d11d18ee90000e8366fc2/frameset.htm">http://help.sap.com/saphelp_470/helpdata/en/0b/2a6695507d11d18ee90000e8366fc2/frameset.htm</a>

Business Service and Business scenario

Hi,
Does Business Service and Business scenario are alike ?
Rgds,sofia

hi,
Business System : is a logical entity assigned to a Technical System in a SLD
Business Service: is an Abstract entity without having assigned to a Technical System in a SLD
for more:
Business System: http://help.sap.com/saphelp_nw70/helpdata/en/42/c817d9d2296bb2e10000000a1553f6/content.htm
Business Service: http://help.sap.com/saphelp_nw70/helpdata/en/c7/301640033ae569e10000000a155106/content.htm
Hope this helps,
Also refer to some previous threads
Business service or Business system??
Re: Business Service <--> Business System
Difference between Business service, Business system and Business process
Business Service vs Business System in Integration Directory.
Business Service (vs) Business System in Integration Directory.
What is the difference between Business System and Business Service?
business system and business service
Diff b/w Business service & Business System?
Thanks
Sanjo
Message was edited by:
Sanjo Eapen

SRM, ROS and SUS scenario question

Hello Experts,
We are in the process of implementing MDM, ROS, EBP and SUS scenario in our present project. I went through the documentation. I have couple of questions.
1. Do we need to have seperate clients for ROS and SUS. What is the best practise.
2. Since we have SUS, once I transfer BP from ROS to EBP, check the portal vendor box, I would like to know how the registration code will be sent to supplier. Do we need to create the userid in EBP or with the receipt of registration code supplier will be able to create his first initial userid? Also how we can implement this with CUA and EP as part of landscape?
3. Also since we have MDM, how the new BP information can be migrated or mapped in MDM and how new BP can be sent to backend system? I understand there is BP monitor to check and approve the changes, but how the new BP will be transferred? Do we need to develop new XI message for this? if Yes, from where that can be managed? from EBP or MDM?.
I searched through help.sap.com for any documentation but no success.
Thanks in advance
Vijay.

Hi,
1.Refer the foll thread:
Re: Supplier Registration without SUS or XI?
2.For supplier registration,SUS is not mandatory.You need to configure ROS for this scenario.The extrenal vendors will register in ROS and then be replicated to R/3.
You can use EBP only for Supplier registration.
SUS,ROS and Bidding engine make up the SRM server 5.5/EBP component of SRM 5.0.
Pls refer the foll link for the complete process:
http://www50.sap.com/businessmaps/8F152C1AE8F1426FA3B442F905815F54.htm
For detailed settings/config of supplier registration,refer the foll threads:
Re: Not able to transfer suppliers from ROS to EBP
problems with ROS_PRESCREEN application for screen suppliers and manage bp
Re: SUPPLIER DIRECTORY (ROS) link not appearing in EBP in "SCREEN SUPPLIERS"
Supplier Directory
Re: Supplier Self registration
Re: SRM Supplier registration config
Re: External Web Service setting for Supplier Registration ROS to EBP
Re: Problems when transferring supplier from ROS to EBP...
3.Not worked on MDM so cant help you on this.
BR,
Disha.
Do reward points for useful answer

How to capture tablespace warning and critical messages

Hi,
Where in the database dictionary, the tablespace threshold percent (warning and critical) defined by the user is stored.
Requirement is to set threshold percent (warning and critical) in OEM and in a function (for User-Defined Metrics) or procedure (for scheduler) check for Tablespace PCT_FULL against the set threshold percent and display message accordingly.
Thanks & Regards,
Sanju.

Sounds like this is default behaviour of the metrics for tablespace full?
Here is the basic query for OEM metrics:
select
target_type,
target_name,
metric_column Metric,
decode(warning_threshold,' ',null, decode(warning_operator,'Equal To','=','Not Equal','!=','Greater Than','>','Less Than','<',warning_operator) || ' ' || warning_threshold) Warning,
decode(critical_threshold,' ', null, decode(critical_operator,'Equal To','Not Equal','!=','=','Greater Than','>','Less Than','<',critical_operator) || ' ' || critical_threshold) Critical
from mgmt$metric_collection
--where target_type = 'oracle_emd'
--and metric_column = 'HostInfovszGrowth'
--and warning_threshold != '20'
--where target_type = 'host'
where-- metric_column like 'tnsPing'
-- (warning_threshold != '80' and critical_threshold != '95')
--and
target_type = 'oracle_database'
--and target_type = 'host'
--and
--target_type = 'oracle_listener'
--target_type = 'oracle_emd'
--and metric_column like 'generic%'
--and warning_threshold like '%ORA%'
and target_name = 'XXXSOMEHOSTNAMExxxx'
and metric_column = 'pctUsed'
order by 1,3,2

Logging just exceptions and 'critical' TopLink info to the log

I'm trying to just log exceptions and other 'critical' info that occur within TopLink to the log rather than getting lots of SQL statements, unit of work info etc.
I'm running TopLink 9.0.3.5 in WebLogic Server 7.0 (SP4) using container managed persistence for Entity Beans.
If I startup WebLogic with the toplink.log.level=INFO option then I get SQL statements, unit of work info, JTS registration info as well as any exceptions that are logged.
If I leave the logging like this my WebLogic log will likely be huge and performance degraded from writing a lot of info that will never be used.
If I startup WebLogic with the toplink.log.level=NONE option then I don't get any log statements, not even exception info (although obviously clients still get the exception stack). I need to get the exceptions and 'critical' TopLink info in the WebLogic log because I cannot rely on getting the information from client logs.
In the TopLink for WebLogic 2.5.1 product the default logging behaviour was to log only exceptions and other 'critical' info to the log.
Is there a way to configure TopLink 9.0.3 so that only exceptions and any other 'critical' TopLink information is written to the log (and SQL statements, unit of work info and JTS registration info is not written).
Thanks.

You don't mention which version of 10g you have but there is a bug in all versions 10.1.2.0.2 and newer in that usernames are no longer being inserted in the Apache log files when portal pages are viewed. It was somewhat hit or miss before, but good enough to get a feeling of what was being used Now, it does not even provide that. Bug number reference from Metalink is 5638057. It is shown as "Closed -- not feasible to fix", but will be addressed in 11.0
I am experimenting with getting this data a couple of ways. One, if you happen to use WebTrends, you can manually set the authenticated users field to whatever you'd like so I am using the API's to retrieve the username and the user company (organization) and concatenating them together.
The other option I am considering is a procedure call in the footer of each page that automatically updates a new table with the session id, username, page, timestamp, and whatever other information you may want each time the page is visited. This table can then be dumped to a data file if desired or left in the database and analyzed using a tool like Discoverer.
Rgds/Mark M.

Intresting and critical scenarios in sd

Similar Messages

Maybe you are looking for