Intresting J2ee_admin has no RFC authorization for SYST

Hi All,
In my dev server, in the runtime workbench ->Component monitoring -> the adapter engine -> Is a user defined for component AF ?
Error 1: It says J2ee_admin user is locked ( i have unlocked it in SU01 for several times and again it gets locked back after some time) can some one kindly give what is the reason for this ?
I am sure this is not caused by manual wrong password login's and we have not changed the password from long time and we r still using the same old password.
Error 2:  After i unlock  j2ee_admin, it says "J2ee_admin has no RFC authorization for SYST"
J2ee_admin currently has the following roles
SAP_J2EE_ADMIN and SAP_S_RFCACL
Administrator role on Java side
when i assign SAP_ALL to the j2ee_admin, this works fine with out any error.
I am suprised that same j2ee_admin works successfully in QA and PRD boxes with out  SAP_ALL authorization ( with only one role SAP_J2EE_ADMIN)
Note: My security lead is not allowing me to use SAP_ALL for DEV box as j2ee_admin on QA and PRD does not contain SAP_ALL ? Java role (administrator is same on all DEV, QA and PRD)
Can u please help me on this ?
Thanking you in advance.
Regards
Sonali

Hi Sonali,
It says J2ee_admin user is locked ( i have unlocked it in SU01 for several times and again it gets locked back after some time) can some one kindly give what is the reason for this ?
Please check whether usertype is Dialog or not. If it is not dialog change it.
Regarding your issue J2ee_admin has no RFC authorization for SYST:
  This is described in SAP note 460089. You need S_RFC, please see the
note for details.
Hope it resolves your issue.Please let me know if you still any issues.
Thanks
Kishore

Similar Messages

  • UWL  : User J2EE_ADMIN has no RFC authorization for function group SYST

    Dear All,
    When I am trying to register the system in universal Worklist Administration, It gives the following error,
    System <>: Fri Jul 11 18:58:11 IST 2008
    (Connector) :com.sap.netweaver.bc.uwl.connect.ConnectorExc  eption:Fri Jul 11 18:58:11 IST 2008
    (Connector) :com.sap.mw.jco.JCO$Exception:User J2EE_ADMIN has no RFC authorization for function group SYST.
       I have tried by giving the role SAP_ALL to J2EE_ADMIN , then also i am getting the same error. Can anybody  through some light on this....
    Helpful tips will be rewarded...
    Sanoj

    Sanoj,
    check these threads
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5489621
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5267551
    https://forums.sdn.sap.com/click.jspa?searchID=13972376&messageID=5636365
    reward points if helpful

  • User SAAPOS has no RFC authorization for function group SYST

    Dear Experts ,
    I am facing this issue kindly help me to sort out this issue.
    User SAAPOS has no RFC authorization for function group SYST
    Thanks in advance
    Thanks & Regards,
    Srinivasan.V
    Moderator message: please search for available information and previous discussions.
    Edited by: Thomas Zloch on Sep 12, 2011 10:17 AM

    Hi,
    try SU53  to get more information about missing authority of user SAAPOS.
    Regards, Dieter

  • User abcd has no RFC authorization for function group SYST

    hi,
       We are trying to http<>XI<>RFC scenario.
    When we are  sending request from http to xI.
    We got the followin response.
    <b>"User abcd has no RFC authorization for function group SYST"</b>
    Kindly let me know what authorization to be given to the user abcd.
    Regards,
    Nishita

    you need to give that user auth. object S_RFC for FUGR SYST and activity *.
    You can double check in transaction SU53 of the target system which check failed for the respective user. There it should show the auth. object mentioned above.
    Regards
    Christine

  • User SAPCPIC1 has no RFC authorization for function group SYST

    Hi,
    The id  SAPCPIC1is getting error "user  has no RFC authorization for function group SYST"
    Please guide.
    Regards,
    Visshwas

    Hi Visshwas,
    Look like user SAPCPIC1 does not have enough authorization,Assaign the same.
    Regards
    Ashok Dalai

  • I E ping error: User XIRWBUSER has no RFC authorization for ...

    Hi all,
    In the RWB->Component Monitoring when I select the
    "Integration Engine" it is giving ping error and Self-Test Status errors.
    Ping error: <b>User XIRWBUSER has no RFC authorization for function group CHECKRFCS</b>.
    Self-Test status: <b>JCo request failed</b>.
    Please help me, it is very urgent.
    Thanks in advance,
    Nagarjuna.

    Hi Nagarjuna,
    Please look at these..
    User abcd has no RFC authorization for function group SYST
    Delta Pull Fails with Short dump in R/3 - RFC_NO_AUTHORITY
    http://help.sap.com/saphelp_nw04/helpdata/en/4f/b541d812aea34695d54758cec0796f/frameset.htm
    cheers,
    Prashanth

  • Has no RFC authorization for function group ZRFC_XI

    Hi All,
       I have a scenario where I am calling RFC inside the BPM.  When I execute I got the errror as
    User SKXXXXX has no RFC authorization for function group ZRFC_XI
    I have gone though the form
    no RFC authorization for function group RFC2
    User abcd has no RFC authorization for function group SYST
    and I understood that  we need to set authroization object S_RFC with RFC_TYPE = FUGR, RFC_NAME = SYST and ACTVT = 16. I think we need to set this to XIISUSER and the password and for PI7.0 user PIISUSER and its password
    But not able to understand where we need to do this activity.  I request you to kindly let me know how to assign this object... do we need to assign in SAP system or in XI system.  please help me out on this problem.
    Regards,
    Dhill

    Dhil,
    I never worked on these stuffs. But I found some useful stuff ,I think surely it will help u.
    http://sap.ittoolbox.com/groups/technical-functional/sap-basis/please-how-to-create-an-authorization-object-386391
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a92195a9-0b01-0010-909c-f330ea4a585c
    Best regards,
    raj.

  • IDOC Scenario - User  has no RFC authorization for function group EDIN

    Hi all,
    I'm trying to configure an IDOC scenario from ECC to XI.
    RFC's, ports and destinations already configured. On WE19 I'm creating an IDOC for testing the scenario. The IDOC is sent successfully, and it stops on TRFC Monitor with error "User PIRFCUSER has no RFC authorization for function group EDIN." .
    Some of you knows what authorization is needed? Basis team said the roles are the same at DEV environment, and there this scenario works fine.
    Thanks for your help.
    regards.
    Roberti

    Hi,
    Check with PIRFCUSER user , that is having the right authorization or not ..
    And make sure that this user is present in the system & it should  not locked.
    to check that user is present or not-----goto su01 of the system & check
    Regards
    Seshagiri

  • User  has no RFC authorization for fun ction group EDIN

    Problem
    Posted: Aug 11, 2005 1:57 AM        Reply      E-mail this post 
    Hi all
    I am trying to send idocs from R/3 to R/3.
    In WE05 I can see STATUS 3 for the test IDOCS Iam sending through WE19.
    But in SM58 I am seeing the following error.
    User <username> has no RFC authorization for fun ction group EDIN .
    Could somebody suggest me a way to solve this problem.
    Thankyou

    I think you need to have S_TRANS_RFC authorisation.
    OR
    In the profile, you need to add the function group.
    Sorry I do not remember the profile name.
    Message was edited by: Vinod C

  • SMD_RFC has no RFC authorization for function group SPF.

    Hi,
    http://pw200-3.fcc.XXXXXXX.com:50000/smd  ->Diagnostics Setup ->Setup Wizard - Step 1  receives an error message like . .
    The value of profile parameter login/accept_sso2_ticket could not be checked
    Attached the below error message
    << >>
      Sat Nov 08 12:19:07 2008 SSO The value of profile parameter login/accept_sso2_ticket could not be checked
    Step SSO Details
    Found SID for SSO ACL entry : PW3
    Found login.ticket_client for SSO ACL entry : 000
    The Read entry permission on TicketKeystore/SAPLogonTicketKeypair-cert was given to sap.com/tcwebadministratorsolmandiag/servlet_jsp/smd/root/WEB-INF/lib/SetupLib.jar
    The TicketKeystore/SAPLogonTicketKeypair-cert was succesfully read (619 bytes)
    SSO ticket certificate of PW3 was imported in ABAP PSE of localhost (client 001) : remove_certificate_failed
    The ticket certificate is already in ABAP PSE, but could not be updated. You might need to check whether the certificate is up to date in STRUSTSSO2
    The value of profile parameter login/accept_sso2_ticket could not be checked
    !! Exception : An exception occured during the execution of this function 'PFL_GET_PROFILE_LIST'.(cause=com.sap.mw.jco.JCO$Exception User SMD_RFC has no RFC authorization for function group SPFL.)
    Thanks
    Thirumal
    Edited by: Thiru Thirumal on Nov 8, 2008 4:33 AM
    Edited by: Thiru Thirumal on Nov 10, 2008 5:49 AM

    Hi All,
    Check the authorizations of user SMD_RFC as described in[ this guide|https://websmp106.sap-ag.de/~sapdownload/011000358700000178012009E/RCA_User_Adminguide_SP18.pdf], refer to section 2.3.3 [SOLMAN.ABAP.RFCCOM]: Internal RFC System User.
    Also check notes  1170859 and  1371222.
    1170859 - SMD_RFC: running RCA without SAP_ALL profile
    1371222 - Additonal authorizations for E2E RCA EhP1 SP20
    I hope this help.
    BR,
    Allam

  • QM-IDI : User QMIDI has no RFC authorization for function group QIRF

    Hi,
    I am in the process of trying to connect from Labware LIMS to SAP ECC 6, specifically the quality module. The aim is to use Labware to connect to SAP via the QM-IDI interface to
    1) Download inspection lots from SAP
    2) Upload usage decisions and inspection lot results to SAP.
    Initially I specified an account on SAP of the type 'Communications Data', however any time I tried to connect to SAP from LIMS via the interface with this account it gives an <i>'Incorrect Username/Password'</i> error in the trace logs. I then changed the account to a dialog user, which seems to be partially more successful, however the trace logs captures the following error 'User QMIDI has no RFC authorization for function group QIRF' when I try to connect from LIMS to SAP via the QM-IDI interface after changing the user to type dialog.
    I would appreciate any guidance on how to resolve this issue.
    Regards.

    i got stuck on configuring idi. plz guide me. bond_chaitu at yahoo dot com

  • UWL: User MSSNO1 has No rfc authorization for function group SWK1

    Dear all,
    We have just recently upgrade our support pack and the UWL in the portal is not working anymore. It throw an error message when we click on the work item.
    (connector): com.sap.mw.jco.JCOSE Exception:User MSSNO1 has No rfc authorization for function group SWK1
    Anyone know how to fix this?
    I am not too sure about the authorization part. Can someone guide me please?
    Thanks.
    Regards,
    Bryan.

    Hi Brain,
    Pls check this thread for solution
    Re: UWL and function group swk1
    Regards,
    Harini S

  • User PI_JCO_RFC has no RFC authorization for function group ERFC

    I am doing IDOC-File scenario between newly installed PI and ECC 6.0 systems.
    I have done all the configurations on XI and R/3 end.
    When I TEST to send an IDOC from WE19, I could do it successfully and the status is 03 in we02.
    But when I go and check SM58, I get the said error: User PI_JCO_RFC has no RFC authorization for function group ERFC.
    From that I understand RFC in R/3 end require some authorizations. Am I right? If so, what objects need to be added my user role?
    Please advise.
    Thanks
    Shiva

    Hi,
    Try to add the following authorization object to the role(s) of the RFC user:
    S_RFC
    Set the following authorizations:
    RFC_TYPE = FUGR (function group)
    RFC_NAME = <name of the function group containing the BAPI>
    ACTVT = 16 (execute)
    Regards
    Seshagiri

  • User SIMPCDIA has no RFC authorization for function group BBPC

    Hello all, I am working with SRM 7.0 and when I try to list all account values in the corresponding matchcode, I have this error message:
    User SIMPCDIA has no RFC authorization for function group BBPC
    User SIMPCDIA is a dialog user created in backend system with authorization objetc S_RFC. I don´t know what is the problem...
    Can you help me please?
    Thanks in advance
    Rosa Rodríguez

    Try testing with a user that has the 'SAP_ALL' profile
    OR
    see if below link is helpful to you.
    [Probable Solution|http://www.sapkb.com/question.php?ID=10]
    Edited by: Saurabh Agarwal on Sep 1, 2010 11:59 AM

  • User CRYSTAL has no RFC authorization for function group BDL5

    I am getting this error. Can anybody help.
    T:40527 Error in program 'boe_cmsd': ======> User CRYSTAL has no RFC authorization for function group BDL5.
    T:40527 Error in program 'boe_cmsd': <* RfcReceive [3] : returns 3:RFC_SYS_EXCEPTION
    T:40527 Error in program 'boe_cmsd': <* RfcCallReceive [3] : returns 3:RFC_SYS_EXCEPTION

    Please post this query to the Business Objects Enterprise Administration forum:
    BI Platform
    That forum is monitored by qualified technicians and you will get a faster response there.
    Thank you for your understanding,
    Ludek
    Edited by: Ludek Uher on Sep 29, 2008 8:38 PM

Maybe you are looking for