Intro followed by loop - How to?
Hello,
I am another newbie to GB. I have searched the forum but can not find the answer for this...maybe because I do not know what to call it.
I would like to make an intro that leads to a loop.
For example:
A 10 measure long song in total.
At the beginning there is a drum beat.
2 measures in another instrument starts.
2 measures after that, another instrument starts.
So after 4 measures all the instruments are playing.
For the last 6 measures they are all playing.
That last 6 measure measures in which all the instruments are playing I want to loop indefinitely.
Every time I try to make a loop using the yellow line on the top, it includes the intro part (the first 4 measures).
It is going to be part of a iDVD project.
So I want is the sound track to start off with one instrument, the others get added, then just the part where all the instruments are playing should continue indefinitely if no one ever goes to another part of the dvd.
Thanks for your help.
Oh - learned something. So the answer to the original question is: Yes, it is possible.
- Start your song at bar 1 with the intro stuff, followed by the loop section.
- Set the yellow cycle bar so that it encompasses the loop region.
- Start the song by double-clicking at bar 1 - the playhead will go straight into the loop section and then repeat it indefinitely.
Similar Messages
-
i have a for loop inside of while loop.when i press stop for while loop, i also would like to stop for loop.how can i solve this problem?thanks
Hi fais,
Following through with what JB suggested. The steps involved in replacing the inner for loop with a while loop are outlined below.
You can replace the inner for loop with a while by doing the following.
1) Right-click of the for loop and select "Repalce" then navigate to the "while loop".
2) Make sure the tunnels you where indexing on with the for loop are still indexing.
3) Drop an "array size" node on your diagram. Wire the array that determines the number of iterations your for loop executes into this "array size".
4) Wire the output of the array size into the new while loop.
5) Set the condition terminal to "stop if true".
6)Drop an "OR" gate inside the while loop and wire its output to the while loops condition terminal.
7) C
reate a local of the boolean "stop" button, and wire it into one of the inputs of your OR gate. This will allow you to stop the inner loop.
8) Drop a "less than" node inside the inner while loop.
9) Wire your iteration count into the bottom input of the "less than".
10) Wire the count (see step 4 above) into the top input of the less than. This will stop the inner loop when ever the inner loop has processed the last element of your array.
Provided I have not mixed up my tops and bottoms this should accomplish the replacement.
I will let others explain how to takle this task using the "case solution".
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
When I save my book in iBooksAuthor as .ibooks, it does not open on the Intro Media page. How can I be sure it opens on the first page?
hello suffaman46, please refer to the documentation provided by yahoo for this issue: http://help.yahoo.com/kb/index?locale=en_US&y=PROD_ACCT&page=content&id=SLN2896
-
Followed instructions on how to reset iPAD passcode. Did not work. What else can I try?
Hi, Nancy, and welcome to Apple Discussions. You've posted your question about using an iPod in a forum devoted to iPhoto, an application that has nothing to do with iPods. You would probably find a better-informed audience over in the iPod discussion area, under the particular Pod model that you own. Good luck!
-
every time I open my itunes a message saying an unknown error has ocurred with the following number -42110. how can I solve it?
Hello there, lgi00.
It can be so perplexing getting error messages when we are just beginning to launch a program. There is a pretty in depth Knowledge Base article that dives into many of the meanings to particular error numbers. See here:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Under "Specific Conditions and Alert Messages: (Mac OS X / Windows)" there is the following explanation and guidelines to getting that issue resolved:
"Error 3001," "-42110," or "5103"
This alert is related to iTunes Store movie rentals and authorization issues.
Make sure you are using the most recent version of iTunes and QuickTime. They both can be downloaded free of charge.
If your iTunes is up to date, remove the SC Info folder.
Thanks for reaching out to the Apple Support Communities for finding an answer to your question.
Cheers,
Pedro D. -
I want to remove the audio I placed in the intro media page. How do I do that?
I want to remove the audio I placed in the intro media page. How do I do that?
What template?
Is the file/book unlocked now?
Did you lock that media when you first added it? -
Following the problem "How to download again PSE11 ..." Jun 16.2014 8:04 AM
Hello !
June 16, 2014 8:04 AM kglad replied me "In response to leautus" about my question: "How to download PSE11 Effective formatting again ..."
At that date I succeeded in install PSE11 on my laptop.
Today, I can not reinstall PSE11 on my desktop PC = "The serial number is invalid".
Previously since purchasing 12 March 2013 PSE11 was installed on both devices (mobile and fixed).
Following the instructions online, "The installer does not accept your serial number" I go in "The serial number does not work."
Here the problem: My Adobe account used for this purchase with the email address "benoit.lotus @ gmail.com" was pirated and therefore account inaccessible. Result serial number also inaccessible.
But this serial number I had noted : removed- **** and it was successfully used for installation on the notebook.
How should I do to again use this software PSE11 at the office and while traveling?
Thank you in advance for your advice.
Sincerely,
Benoît Petitjean
[email protected]Hello,
Thank you vert much.
I have found the solution of my problem.
It was a mistake. I tried to install PremièresElements11 with my code
PhotoshopElements11...
Difficult, isn't it ?
Sincerly,
Benoît Petitjean
2014-06-30 19:49 GMT+07:00 Peru Bob <[email protected]>:
Following the problem "How to download again PSE11 ..." Jun 16.2014
8:04 AM
created by Peru Bob <https://forums.adobe.com/people/Peru+Bob> in *Photoshop
Elements* - View the full discussion
<https://forums.adobe.com/message/6509489#6509489> -
I don't know much, but I can follow instructions. How can I get my rental movie from my iPhone to my iPad.... And I've rented another movie, now I want to get it from pc to iPad....help be much appreciated...
Did you rent the film directly on the iPhone ? I've never rented films, but from : http://support.apple.com/kb/HT1415 :
You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to any other device and you must watch it on that device.
If you've rented a film on your computer's iTunes then you should be able to sync it to your iPad from your computer's iTunes via the Movies tab that shows on the right-hand side of iTunes when you've selected the iPad 'device' on its left-hand side -
HT4993 my iphone is stuck in a reboot loop how do i get out
my iphone is stuck in a eboot loop how do i get it out
Follow these steps and your iPhone should work fine.
1. Hold the power and home button simotaniously (at the same time) for 10 seconds.
2. Wait 5 seconds then reboot.
If the issue presists, do this.
1.Connect to iTunes via USB cable.
2.Hold power and home button for 10 seconds or until screen turns black, let go of the power button, but continue holding the home button for 5 seconds or until the emergency diagnostics screen (iTunes icon with USB cable) pops up.
3. If done correctly you will see the screen above. Now, wait for iTunes to diagnose the phone, and if nessesary, restore your iPhone.
I hope this helped you!
<Edited By Host> -
Data coming out of a loop, how can I represent them to be similar like they were in the loop?
If I link the vi "filter 2 1.03" located in the "analysis" vi (independantly from "analysis") to the "Global" vi located in the "3 dim-graph" vi and the link this to a 3D graph, I get the graph I looking for.
Here, the "filter 2 1.03" vi is located in the "Analysis" vi and the data traverse a loop before going to the "Global" vi, located in "3 dim graph" vi.
How can I do to have the data going in the "Global" vi, like if they were just coming out from the "filter 2 1.03" vi?
Summer
Attachments:
Plot_analog.dr.vi 118 KB
Analysis_dr.vi 714 KB
PT_3-dim_Graphics_dr6.vi 106 KBWhen I try to open your VIs, they come up broken. You may want to save the VIs as a development library. Open the VI >> file >> save as >> development distribution. I also cannot follow exactly what you need. Would it be possible to simply your code down to the exact problem? This will help us tremendously in giving you a solution.
Jeremy -
Full GC Loop + How to interpret Verbose GC?
Can someone please explain how this verbose gc can be interpretted?
It appears like there is close to 1G free for promotion and still the Young Gen promotion is not happening. Is this normal ?
The application goes into Full GC loops and eventually has to be restarted to be performant again.
Line 88326 : 41900.684: [GC [PSYoungGen: 1866224K->43794K(1931840K)] 3502757K->1685045K(5446976K), 0.1167970 secs] [Times: user=0.12 sys=0.00, real=0.12 secs]
Line 88327 : 41906.230: [GC [PSYoungGen: 1868882K->64245K(1941056K)] 3510133K->1705697K(5456192K), 0.1538270 secs] [Times: user=0.15 sys=0.00, real=0.15 secs]
Line 88328 : 41913.490: [GC [PSYoungGen: 1903285K->15842K(1941440K)] 3544737K->1685685K(5456576K), 0.1050850 secs] [Times: user=0.10 sys=0.00, real=0.11 secs]
Line 88329 : 41919.636: [GC [PSYoungGen: 1854882K->71593K(1938112K)] 3524725K->1743162K(5453248K), 0.1610370 secs] [Times: user=0.16 sys=0.00, real=0.16 secs]
Line 88330 : 41926.003: [GC [PSYoungGen: 1906473K->44674K(1879616K)] 3578042K->1716607K(5394752K), 0.0935700 secs] [Times: user=0.11 sys=0.00, real=0.10 secs]
Line 88331 : 41931.256: [GC [PSYoungGen: 1879554K->19205K(1940032K)] 3551487K->1720689K(5455168K), 0.0924580 secs] [Times: user=0.13 sys=0.00, real=0.09 secs]
Line 88332 : 41935.287: [GC [PSYoungGen: 1857477K->41100K(1939968K)] 3558961K->1742584K(5455104K), 0.0953660 secs] [Times: user=0.14 sys=0.00, real=0.09 secs]
Line 88333 : 41938.270: [GC [PSYoungGen: 1879372K->18301K(1942016K)] 3580856K->1719871K(5457152K), 0.1102160 secs] [Times: user=0.09 sys=0.00, real=0.11 secs]
Line 88334 : 41941.788: [GC [PSYoungGen: 1863293K->79254K(1941568K)] 3564863K->1781043K(5456704K), 0.0817900 secs] [Times: user=0.24 sys=0.00, real=0.08 secs]
Line 88335 : 41946.594: [GC [PSYoungGen: 1924246K->69389K(1938112K)] 3626035K->1771986K(5453248K), 0.1661760 secs] [Times: user=0.20 sys=0.00, real=0.16 secs]
Line 88336 : 41951.120: [GC [PSYoungGen: 1902861K->38451K(1871936K)] 3605458K->1770219K(5387072K), 0.1473680 secs] [Times: user=0.18 sys=0.00, real=0.15 secs]
Line 88337 : 41958.626: [GC [PSYoungGen: 1871923K->54656K(1942400K)] 3603691K->1788149K(5457536K), 0.1552370 secs] [Times: user=0.16 sys=0.00, real=0.15 secs]
Line 88338 : 41966.122: [GC [PSYoungGen: 1893824K->76469K(1939328K)] 4634025K->2853942K(5454464K), 0.1254980 secs] [Times: user=0.22 sys=0.00, real=0.13 secs]
Line 88339 : 41967.458: [GC [PSYoungGen: 1358774K->17127K(1941760K)] 4136247K->3836163K(6037760K), 1.0412470 secs] [Times: user=0.80 sys=0.34, real=1.04 secs]
Line 88340 : 41968.499: [Full GC[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor1047]
Line 88471 : 41975.139: [GC-- [PSYoungGen: 1836416K->1836416K(1941760K)] 4982380K->4982380K(6037760K), 0.0646720 secs] [Times: user=0.06 sys=0.01, real=0.06 secs]
Line 88472 : 41975.204: [Full GC[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor1202]
Line 88543 : 41979.042: [GC-- [PSYoungGen: 1837491K->1837491K(1941760K)] 4983455K->4983455K(6037760K), 0.3140620 secs] [Times: user=0.63 sys=0.00, real=0.32 secs]
Line 88544 : 41979.356: [Full GC[Unloading class sun.reflect.GeneratedSerializationConstructorAccessor671]
Line 88560 : 41985.093: [GC-- [PSYoungGen: 1830269K->1830269K(1941760K)] 4795149K->4795149K(6037760K), 0.3286810 secs] [Times: user=0.63 sys=0.00, real=0.33 secs]
Line 88561 : 41985.422: [Full GC [PSYoungGen: 1830269K->1831614K(1941760K)] [PSOldGen: 2964879K->2964879K(4096000K)] 4795149K->4796494K(6037760K) [PSPermGen: 123099K->123099K(126656K)], 3.1776690 secs] [Times: user=3.17 sys=0.01, real=3.18 secs]
Line 88562 : 41988.810: [GC-- [PSYoungGen: 1836416K->1836416K(1941760K)] 4901950K->4901950K(6037760K), 0.2989710 secs] [Times: user=0.63 sys=0.00, real=0.30 secs]
Line 88563 : 41989.109: [Full GC [PSYoungGen: 1836416K->1837766K(1941760K)] [PSOldGen: 3065534K->3065534K(4096000K)] 4901950K->4903301K(6037760K) [PSPermGen: 123099K->123099K(126528K)], 3.1866390 secs] [Times: user=3.17 sys=0.00, real=3.19 secs]
Line 88564 : 41992.341: [GC-- [PSYoungGen: 1837766K->1837766K(1941760K)] 4903301K->4903301K(6037760K), 0.3023900 secs] [Times: user=0.63 sys=0.00, real=0.30 secs]
Line 88565 : 41992.643: [Full GC [PSYoungGen: 1837766K->1837766K(1941760K)] [PSOldGen: 3065534K->3065534K(4096000K)] 4903301K->4903301K(6037760K) [PSPermGen: 123099K->123099K(125952K)], 3.1959920 secs] [Times: user=3.17 sys=0.01, real=3.20 secs]
Line 88566 : 41995.849: [GC-- [PSYoungGen: 1837766K->1837766K(1941760K)] 4903301K->4903309K(6037760K), 0.3198970 secs] [Times: user=0.63 sys=0.00, real=0.32 secs]
Line 88567 : 41996.169: [Full GC [PSYoungGen: 1837766K->1813137K(1941760K)] [PSOldGen: 3065542K->3062041K(4096000K)] 4903309K->4875179K(6037760K) [PSPermGen: 123099K->123099K(125888K)], 5.4472620 secs] [Times: user=5.44 sys=0.00, real=5.45 secs]
Line 88568 : 42001.746: [GC-- [PSYoungGen: 1836416K->1836416K(1941760K)] 4898457K->4898457K(6037760K), 0.2801550 secs] [Times: user=0.65 sys=0.00, real=0.28 secs]
Line 88569 : 42002.026: [Full GC [PSYoungGen: 1836416K->1837744K(1941760K)] [PSOldGen: 3062041K->3062041K(4096000K)] 4898457K->4899786K(6037760K) [PSPermGen: 123099K->123099K(125824K)], 3.2083830 secs] [Times: user=3.20 sys=0.01, real=3.21 secs]
Line 88570 : 42005.266: [GC-- [PSYoungGen: 1837744K->1837744K(1941760K)] 4899786K->4899786K(6037760K), 0.2898370 secs] [Times: user=0.59 sys=0.00, real=0.29 secs]
Line 88571 : 42005.556: [Full GC [PSYoungGen: 1837744K->1837744K(1941760K)] [PSOldGen: 3062041K->3062041K(4096000K)] 4899786K->4899786K(6037760K) [PSPermGen: 123099K->123099K(125312K)], 3.2037720 secs] [Times: user=3.20 sys=0.01, real=3.20 secs]
Line 88572 : 42008.805: [GC-- [PSYoungGen: 1837744K->1837744K(1941760K)] 4899786K->4899794K(6037760K), 0.3347480 secs] [Times: user=0.59 sys=0.00, real=0.33 secs]
Line 88573 : 42009.140: [Full GC [PSYoungGen: 1837744K->1837744K(1941760K)] [PSOldGen: 3062049K->3062049K(4096000K)] 4899794K->4899794K(6037760K) [PSPermGen: 123099K->123099K(125312K)], 3.1690990 secs] [Times: user=3.16 sys=0.00, real=3.17 secs]
Line 88574 : 42012.319: [GC-- [PSYoungGen: 1837744K->1837744K(1941760K)] 4899794K->4899794K(6037760K), 0.3056590 secs] [Times: user=0.62 sys=0.00, real=0.31 secs]
Line 88575 : 42012.625: [Full GC [PSYoungGen: 1837744K->1813115K(1941760K)] [PSOldGen: 3062049K->3060814K(4096000K)] 4899794K->4873929K(6037760K) [PSPermGen: 123099K->123099K(124800K)], 4.9230010 secs] [Times: user=4.92 sys=0.01, real=4.92 secs]
Line 88576 : 42017.661: [GC-- [PSYoungGen: 1836416K->1836416K(1941760K)] 4897230K->4897230K(6037760K), 0.2799600 secs] [Times: user=0.66 sys=0.00, real=0.28 secs]
The following JVM options were used
-Xms512M -XX:MaxPermSize=260M -Xmx6000MAny solution on this one?
i have same question. -
Recursive Loops - How to implement "Lucas Numbers" Algorithm?
Hey,
I've seen other posts that are criticized to be more specific, so I hope I am clear in my questions.
I am trying to implement the Lucas Numbers series through a recursive loop. The formula is the following:
Ln = Ln-1 + Ln-2 for n>1
L0 = 2
L1 = 1
This is my first attempt at the code, which runs and gives horrible output for obvious reasons; my algorithm is probably incorrect.
//Based on the above algorithm, let Ln be L(int number)
public class RecursiveMethods{
//int limit = 30;
public RecursiveMethods(){
//No Constructor Yet
public int getLucasSequence(int number){ //Will print out
if(number == 1){ //I don't know what to set the base case to.
return number;
else{
// System.out.println(number);
return number * getLucasSequence((number - 1) + number); //Is this where the formula goes? If so, how do I implement it?
public static void main(String [] args){
//System.out.println("Test");
RecursiveMethods myMethods = new RecursiveMethods();
//System.out.println(myMethods.getLucasSequence(99));
//for(int i = 0; i < 10; i++){ //Is this where you set the limit of iterations?
System.out.println(myMethods.getLucasSequence(4)); //Value must not be one or two
}I have the following questions:
1) Based on the mathematical algorithm, how would I implement it in Java?
2) What would be the base case for a recursive loop that prints a series of Lucas Numbers
3) How would I set the limit on numbers?
I am a beginner programmer, so please explain these in terms I will be able to understand. I don't mind if you give hints too.
Thanks!
Chrispackage recursives;
public class RecursiveMethods{
public RecursiveMethods(){
//No Constructor Yet
* @param number specifies the index of the element in the Lucas sequence to be computed
public int getLucasSequence(int number){ //Number should be Lnum
if(number == 1){
return number;
else if(number == 0){ //The lucas sequence will always start off with 2...I forgot about this!
return 2;
else{
// System.out.println(number);
return getLucasSequence(number - 1) + getLucasSequence(number - 2);
public static void main(String [] args){
//System.out.println("Test");
RecursiveMethods myMethods = new RecursiveMethods();
//System.out.println(myMethods.getLucasSequence(99));
//for(int i = 0; i < 10; i++){ //Is this where you set the limit of iterations?
System.out.println(myMethods.getLucasSequence(3)); //Value must not be less than zero
}Sorry, I'm new to actually publishing code. Therefore, my coding style is very sloppy and usually uncommented. Thanks for the advice though, I will surely start implementing it in later projects!
Edited by: Chris.Y on Nov 3, 2008 4:38 AM -
HT1414 tooggling power loop - how to backup data
My phone is toggling in a power loop between the apple icon (what you get when you shut it down) and the lock screen. I downloaded icloud on my computer to tried and backup all my data, videos, etc. I don't think I have the icloud app installed on my phone and now can't get into it to add it. Is there any way to recover my data? From what I've read, i'll have to do a factory reset.
Hello Kim,
Thank you for providing the details of the issue you are experiencing with your iPhone. I understand how important it is to keep the data on your iPhone. Have you attempted to back up your iPhone using iTunes?
The following article has steps to back up your iPhone using iTunes. I recommend resetting your iPhone as described in the steps below and then trying to create a backup with iTunes using the steps in this article:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Once you have created a backup, I recommend continuing with steps 4-6:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on),reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
You can find the full article here:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thank you for using Apple Support Communities.
Best,
Sheila M. -
In Loop how to move condition type data
Hello Experts,
In loop while i am collecting data in final loop,
I have different pack sizes in pricing procedures viz. p10kg,
p20kg., p15kg.....like wise along with BED, EDU CESS,
Sec & High & VAT . i have fetch data from KONV.
for this i have written two select queries for pack size only in it_konv and other for taxes in it_konv1.
now, for one item no. i have three pack sizes 10, 20 40.
see the following.
FORM GET_ITEM.
DATA: QUANT TYPE KONV-KWERT.
CLEAR QUANT.
CLEAR WA_FINAL-BEDTX.
CLEAR WA_FINAL-EDUTX.
CLEAR WA_FINAL-SECTX.
CLEAR WA_FINAL-VATTX.
LOOP AT IT_VBRK INTO WA_VBRK.
WA_FINAL-VBELN = WA_VBRK-VBELN.
WA_FINAL-FKDAT = WA_VBRK-FKDAT.
WA_FINAL-KUNAG = WA_VBRK-KUNAG.
READ TABLE IT_KNA1 INTO WA_KNA1 WITH KEY KUNNR = WA_VBRK-KUNAG.
WA_FINAL-ADRNR = WA_KNA1-ADRNR.
READ TABLE IT_ADRC INTO WA_ADRC WITH KEY ADDRNUMBER = WA_KNA1-ADRNR.
WA_FINAL-NAME1 = WA_ADRC-NAME1.
WA_FINAL-STREET = WA_ADRC-STREET.
WA_FINAL-STRET1 = wa_adrc-STR_SUPPL1.
WA_FINAL-STRET2 = WA_ADRC-STR_SUPPL2.
WA_FINAL-CITY1 = WA_ADRC-MC_CITY1.
WA_FINAL-POSTAL = WA_ADRC-POST_CODE1.
WA_FINAL-TIMEZ = WA_ADRC-TIME_ZONE.
LOOP AT IT_VBRP INTO WA_VBRP WHERE VBELN = WA_VBRK-VBELN.
WA_FINAL-ITEM = WA_VBRP-POSNR.
WA_FINAL-SALQT = WA_VBRP-FKIMG.
WA_FINAL-SALUN = WA_VBRP-VRKME.
WA_FINAL-MATNR = WA_VBRP-MATNR.
WA_FINAL-DESCP = WA_VBRP-ARKTX.
WA_FINAL-ORDNO = WA_VBRP-AUBEL.
LOOP AT IT_KONV INTO WA_KONV WHERE KNUMV = WA_VBRK-KNUMV.
WA_FINAL-PACKSZ = WA_KONV-KSCHL.
WA_FINAL-EXVALUE = WA_KONV-KWERT.
WRITE : / WA_FINAL-PACKSZ,
WA_FINAL-EXVALUE.
LOOP AT IT_KONV1 INTO WA_KONV1 WHERE KNUMV = WA_VBRK-KNUMV.
IF SY-SUBRC = 0.
IF WA_KONV1-KSCHL = 'JEXP' .
WA_FINAL-BEDTX = WA_KONV1-KWERT.
ELSEIF WA_KONV1-KSCHL = 'JECS'.
WA_FINAL-EDUTX = WA_KONV1-KWERT.
ELSEIF WA_KONV1-KSCHL = 'JA1X'.
WA_FINAL-SECTX = WA_KONV1-KWERT.
ELSEIF WA_KONV1-KSCHL = 'JIVP'.
WA_FINAL-VATTX = WA_KONV1-KWERT.
ENDIF.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDLOOP.
APPEND WA_FINAL TO IT_FINAL.
ENDLOOP.
ENDFORM.
plz experts giv me solution.
Thaanks In Advance,
Ashish.>
sunny vaswani wrote:
> yeh kya code kyu paste kiya hai
>
> there is no solution for this question kindly close this thread.
use common language, which is english. -
I am using the latest Firefox (28.0) on Windows XP in a shared computer environment. Although I do not have Administrator access, I installed Firefox myself and can change whatever Firefox config settings I want (including about:config and mucking with the files in the installation directory).
I want to disable the tab that appears on Firefox startup, "Another program on your computer would like to modify Firefox with the following add-on". This tab usually appears once per day (the first time I startup Firefox each day). I want the tab not to appear at all, from now on.
The "another program" in question is some program that is used in the facility where I'm using the computer, so I can't just uninstall that program. Although this is a shared computer environment, they don't "wipe" the machine every day, just reboot. So the Firefox I installed is still there with all my config settings intact. As far as I know, I'm the only person who uses Firefox on this computer.
Solutions that don't work:
"Just click Continue" -- but then I still see the "Another program" tab every day, and don't want to see it.
"Click Remove in the Add-ons list" -- I removed the Add-on in question but the tab still appears every day.
I would like a solution that either eliminates the Add-on request for that particular application, or eliminates all such requests ("Another program...") regardless of what application requested it. The ideal solution would be if the request itself had a checkbox for "never ask this again" but, alas, no such luck.Gosh... I spent about an hour preparing a response, then accidentally did control-something or alt-something which took me back a page and I lost everything I typed (even after I clicked Forward to try to get back to where I was). If anyone knows of a config setting like "don't ever trash an entire page of user input unless the user explicitly confirms it", or, "keep form input data even if the user goes Back or Forward", I think that would be a great feature.
OK, back to the original question...
I appreciate the responses thus far, but I think there have been some misunderstandings. Maybe a multiple-choice version would help:
Question: Is there a way to suppress the appearance of the notification tab that says, "Another program on your computer would like to modify Firefox with the following add-on" (meaning, any request from another program to install an add-on is to be silently ignored and discarded)?
Answer:
(A) Yes, you can suppress that notification (please state how).
(B) No, but you can request that feature (please state where).
(C) No, you can't do that or request that feature.
That's basically my question in a nutshell. If the answer is (B), I might envision a boolean about:config setting like "extensions.allowProgrammaticAddonRequests" that defaults to "true" and can be set to "false" manually. I think that would be the most direct solution (if it were possible).
I will respond to some comments from above:
"I don't understand why you are using a mozilla.cfg file to lock those preferences when you can modify the preferences for your current Firefox profile via about:config" -- This is because the "other program" in question (iCafe Manager) was setting certain config options (browser.startup.homepage, and browser.newtab.url) on every reboot (which happens every morning at that facility). I got tired of manually changing the settings back every day. Using the above-mentioned files, I successfully defeated iCafe Manager's daily interference with those config settings. The other things (like stuff related to Socks tunnelling) I probably could have just set once in about:config but doing a lockPref seemed to do no harm. The settings for "enabledScopes" and "xpinstall" were to see if they'd help with the problem I originally asked about, but they did not.
"I would look in about:config to make sure those preference modifications are in effect" -- yes, I confirmed that the settings are in effect and locked. That much works as expected.
"A) removing the iCafe Toolbar extension from the Firefox Addons -> Extensions panel results in the "Another program" tab at startup" -- true, but I think it would be more accurate to say: while the toolbar extension is not installed (due to either having been removed, or, never having been installed at all), the "Another program" tab appears on at least the first startup of Firefox after every reboot.
"B) when you allow the installation it shows up as "(disabled)" in the Extensions list but the unwanted toolbar still shows up (correct?)" -- yes, correct.
"You could explain the problem to the system administrator of your facility" -- unfortunately, there's no administrator on site, only a person who makes sure the lights are on. They'll call a tech if there's a catastrophic problem (like the net connection goes dead). Since I installed Firefox myself, and since iCafe Manager is a program they installed, I don't think they'll go out of their way to help me with Firefox (especially if I'm trying to defeat iCafe Manager's attempts to interfere with Firefox). From their point of view, their systems are working just fine.
"allow the installation and then see if you can go to the Firefox Customize menu and HIDE the toolbar as a workaround" -- since I'm not in that facility now (and probably won't be again until this summer or so), I can't experiment with those systems now. But I do recall clicking just about everything I could, including "View - Toolbars" (which seems to be the same menu as when I right-click on a toolbar line). That menu allows hiding toolbars, but from my recollection, the offending toolbar was not displayed in the list, so I could not hide it that way. Also, the Customize menu ("View - Toolbars - Customize") seems to allow only modifications to a toolbar, and not a way to hide an entire toolbar.
"it might help if you could post a new troubleshooting information list after you allow the iCafe Toolbar installation" -- ok, that troubleshooting report is included below.
Thanks again for your help.
Application Basics
Name: Firefox
Version: 28.0
User Agent: Mozilla/5.0 (Windows NT 5.1; rv:28.0) Gecko/20100101 Firefox/28.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: iCafe Manager Toolbar
Version: 5.2.0.6
Enabled: false
ID: {C058FE28-1E07-4FD1-8092-046F8A964D12}
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 358400
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.cache.disk.smart_size_cached_value: 358400
browser.newtab.url: about:blank
browser.places.smartBookmarksVersion: 6
browser.sessionstore.upgradeBackup.latestBuildID: 20140314220517
browser.startup.homepage: http://www.google.com/ncr
browser.startup.homepage_override.buildID: 20140314220517
browser.startup.homepage_override.mstone: 28.0
dom.mozApps.used: true
extensions.lastAppVersion: 28.0
gfx.blacklist.direct2d: 3
gfx.blacklist.layers.direct3d10: 3
gfx.blacklist.layers.direct3d10-1: 3
gfx.blacklist.layers.direct3d9: 3
gfx.blacklist.layers.opengl: 3
gfx.blacklist.stagefright: 3
gfx.blacklist.suggested-driver-version: 6.1400.1000.5218
gfx.blacklist.webgl.angle: 3
gfx.blacklist.webgl.msaa: 3
gfx.blacklist.webgl.opengl: 3
network.cookie.prefsMigrated: true
network.websocket.enabled: false
places.database.lastMaintenance: 1398414928
places.history.enabled: false
places.history.expiration.transient_current_max_pages: 53428
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
plugin.state.npgoogleupdate: 1
privacy.sanitize.migrateFx3Prefs: true
privacy.sanitize.sanitizeOnShutdown: true
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1396778909
Graphics
Adapter Description: Intel(R) G33/G31 Express Chipset Family
Adapter Drivers: igxprd32
Adapter RAM: Unknown
Device ID: 0x29c2
Direct2D Enabled: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
DirectWrite Enabled: false (0.0.0.0)
Driver Date: 11-3-2008
Driver Version: 6.14.10.5009
GPU #2 Active: false
GPU Accelerated Windows: 0/1 Basic Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
WebGL Renderer: Blocked for your graphics driver version. Try updating your graphics driver to version 6.1400.1000.5218 or newer.
Vendor ID: 0x8086
windowLayerManagerRemote: false
AzureCanvasBackend: skia
AzureContentBackend: cairo
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.3
Version in use: 4.10.3
NSS
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSSMIME
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSSSL
Expected minimum version: 3.15.5 Basic ECC
Version in use: 3.15.5 Basic ECC
NSSUTIL
Expected minimum version: 3.15.5
Version in use: 3.15.5
Maybe you are looking for
-
IPhone mail app stopped pushing mail
I am having the same problem with all 3 of my mail accounts including my mac mail and gmail. I've tried all of the fixes, resetting the accounts, restarting the phone, etc.. but as of four days ago, it simply stopped pushing email in or out. It look
-
I need to update my iphone 4 but have never used this computer before and i dont want to lose all my songs contacts and games can anyone help me find out if its possible and how to do it im desperate.
-
Link to Content Area from ASP page brings up default page
I have a link on an ASP to the content area. When the user clicks on the link, he/she is required by the portal to provide their username/password. After entering the correct information, the users are displayed their default page NOT taken to the co
-
My WRT54G v5 router loses internet connection frequently
My WRT54G v5 router loses internet connection frequently. Sometimes occurs when you enter a web or sometimes every few minutes, but without a pattern. I have W XP Pro with SP3 and I have a pc wired to the router and sometimes 2 notebook with Wi-Fi. W
-
Seeburger module configuration
We are using this module configuration for converting EDI D96A format to XML: 1 localejbs/CallBicXIRaBean Local Enterprise Bean bic 2 localejbs/CallSapAdapter Local Enterprise Bean 0 bic destSourceMsg MainDocument bic