Introduction message should be in a "Introduce yourself" forum

To get this forum off the ground properly, could some Mod perhaps create a new Forum where people can introduce themselves (although I hate forums like that personally, because new members are bound to ask forum-specific questions)?
Then move the Introduction thread to that forum?
Guess this is the 'new-ness' where everything needs to be sorted out first.

Well,
I think the intent was more to spark some conversation, to give folks a chance to post and experiment a little bit, but your point is well taken. In time, discussion in the product sessions will be more about the product.
The welcome section, will be a welcome center with a number of floated messages to help users find their way around, and beyond that, I think it would be interesting to have some "getting to know you" kind of threads for new members to post to. Sort of like a giant register, but with more than just people's user id's signed in it.
Let's let this stand a bit in the product forums, and once we start to build some proper content, we can splice these together and move them to the welcome area.
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Material statuses error message should go after entering Trackin No in PO

Hi All,
I have created one Material statuses with error message, I have created material with the use of that material statuses..
Its working fine,At the creation of PR, PO I'm getting that Error message..
My requirement is if I enter Requirement Tracking Number at item level of PR or PO means that Material statuses Error message should Go out and system has to allow to create PR or PO..
Is it possible?? how to do it?? plz help me...
Is it possible in standard SAp???
thanks and regards
rames reddy

Hi,
You can keep Requirement Tracking Number as Required Entry in field selection key (NBF or a copy of NBF as ZNBF) of PO document type in u201CReference data, itemu201D segment in following path:
SPRO > Materials Management > Purchasing > Purchase Order > Define Screen Layout at Document Level
And then assign field selection key to PO Document type and save.
SPRO > Materials Management > Purchasing > Purchase Order > Define Document Types
Now create PO with PO document type, system will ask you to enter Requirement Tracking Number in u201CItem Overviewu201D unless then you can save Purchase Order.
The same you can do for PR document type by having a field selection key for PR document type.
Regards,
Biju K

PO message should get failed for P.grp other than AB1 and AB2

Hello SAP Gurus,
I have a requirement like PO message should get failed for P.grp other than AB1 and AB2.
Detail explanation:
I have a P.grp AB1,AB2,AB3,AB4 etc.... The current process is once PO created and saved the message will be triggered and IDOC is transmitted to the vendor, irrespective of what ever the P.grp.
My requirement is like the PO message should get failed if P.grp is other than AB1 and AB2, and reason should be shown any where in IDOC or in messages.
Pls advice.
Thanks.

Hi Jurgen,
Thanks for the reply...
There are only 5 vendors which is relevant for EDI and P.grp AB1 and AB2 denotes EDI PO, same P.grp mapping has been done in PI also via data ID. The user sometimes selects the P.grp AB3, AB4 etc incorrectly and it goes to the vendor which in-turn again the customer has to amend the PO.
Now I'm planning to include a piece of logic while saving the PO, check if the vendor is EDI vendor then P.grp should be AB1 or AB2, if it is a different P.grp then the system will not allow to save the PO,so that the user will select the relevant P.grp for EDI vendors. Pls let me know your thought and inputs.
Thanks.

Message should get generated in outbound program when idoc is posted in ot

Dear All,
Can anyone please tell me,how i can send response back to the idoc program.
Requirement: Outbound program will generate an idoc and when it gets posted in the other server a message should appear that idoc was posted in other server...
Now can anyone tell me how i can do this,i mean message should get generated in outbound program when idoc is posted in other server..
warm regards
Sajid

hi,
Go through the following thread
iDoc - XI - iDoc with Acknowledgement
Regards
Mudit

When I check my email on my iPad, it only shows the headers, it is blank where the message should be. How do I fix this?

When I check my email on my iPad, it only shows the headers, it is blank where the message should be. How do I fix this?

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo.

Introduce yourself to the community!

Hey all,
This thread can be used to introduce yourself to the community. Just say hello or maybe even add a little bit about yourself. Whatever you feel comfortable with I'll start it off I'm Yannick, I joined Telstra in July, but have been lurking around for quite a while now. I'm the community manager here at CrowdSupport so should you have any suggestion or need anything, don't hesitate to give me a shout!
So that’s a bit about me and I am looking forward to seeing you all in the forums soon!
Yannick Pierre in Melbourne
Telstra Digital Sales & Service

Hi Everybody!
I'll start the introduction ball rolling with an introduction of myself: my Earth name is Dylan, and this the first time I've ever used the word "introduction" so many times in a sentence. I have been sent here from my home planet to help you use these forums in the most efficient and effective way possible. I am well versed in a number of languages including English, and some others that I can assure you aren't made up. I have been working at Telstra for nearly four years now, helping customers via phones, email and live chat before a year ago joining our Social Media team and talking to you via Twitter, Facebook and Whirlpool where I have learnt all sorts of new acronyms.
My job here will be to moderate the forums, review flagged posts, and occasionally to step in and join the conversation every now and then when it is needed. I'll do my best to help in any way that I can. But that's boring* so let's talk about me.
I love a good game, and spend most of my spare time attached to my PS3 playing NBA 2K11, and have been playing the GTAs ever since the very first overhead view one. I'm still plugging away with an iPhone 3GS that is starting to get a bit long in the tooth, but is still probably the best mobile phone I've ever used. I have been a Port Adelaide since before I can remember (or at least I'm told that). I look forward to seeing you on the forums, although if I have to delete something you've said then I obviously won't be looking quite as forward to that. I really thought you were above that <shakes head>.
See ya round!
-Dylan
*Not a guarantee that the next bit will be less boring.

In order to share music and apps but not calls and messages, should two iphones have different or the same apple id?

My sister started an itunes account when we were younger and she first got an ipod. Later I got an ipod touch, so we thought it was smarter that I use the same account so we can share apps and music. Since then my sister has gotten an iphone, my mom has gotten an ipad, and i have kept my ipod, with all of our devices on the same account. Now I got an iphone, and im wondering if i should keep the same account or if now is a great time to get a new one. Im not sure if you can have both iphones on one account without confusion with messages and whatnot, and likewise im not sure if you can have two accounts with shared purchases. Any advice?

MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime
Yuu can also
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
More details of how:
http://ipadhelp.com/ipad-help-tips-tricks/how-to-get-free-apps-from-the-app-stor e-without-a-credit-card/
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud if you want her to have separate Contacts Calendar and some other things.
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases.

Messages, should be on all devices?

I have iphone,ipad and imac...i'm suppose to be able to continue a conversation on any device but it's not happening, what do I change?

HI,
At OS X 10.8.2 and iOS 6 (it is currently iOS 6.0.1) things should work across all devices and Macs running Messages.
However it does help if there is or was a "Start Date" so that the iMessages server knows when to start syncing.
It will not sync conversations already in place.
Sync also refers to "Display on all devices" and not a more integrated "allow actions on one device to be reflected on all".
Therefore once messages are showing up they can be deleted on one device but will remain on another.
If the Apple ID is on the iPhone and iPad and in Messages on the Mac for the iMessages account then shut down Messages on the iPad and iPhone (break with Server) Putting the iPhone in Airplane mode will also do this)
After a wait of a couple of Minutes turn Messages back on.
Then Restart the Mac's version.
At this point you should get alert Messages from the iMessages server about Apple ID and iPhone Numbers being used.
This should be repeated on any other iOS device as well.
Accepting the ID or iPhone Number as Alias will have them in the "Receive" spot in the iMessages Account pane in the Messages app on the Mac with a tick to show they are active.
Denying still lists them but they will be unticked and not active.
9:11 PM Friday; January 18, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Dropped Frames, Error Messages - should I be worried?

Hi,
I recently upgraded to FCP 6 and I'm getting error messages when playing back video from my timeline saying there are DROPPED FRAMES. Sometimes it comes up with RED lettering and I get worried -- like my system is gonna crash or something. Should I be worried?
-JD

Is the firewire drive the only device on your firewire port and are you using the built in firewire port of the Mac, or are you using an internal firewire card you installed.
When you use a firewire drive to capture/playback from and are using the built in firewire ports of the Mac, (both ports share the same I/O) you can end up with dropped frames, if you are running a secondary firewire device on the same port, (such as a DV camcorder, deck, etc.)
This is why most FCP users purchase an internal firewire card to run the secondary devices from.
ALSO: Try tossing your FCP preferences, they sometimes can cause problems like this. You'll have to reset your preference after doing so.

Warning message should be raised when user changes Business Area in MIRO.

Hello all,
My requirement is,
When in MIRO transaction, in details tab the BA (Business Area) comes from PO line items. When user changes this Business Area to some other value then the system should raise a warning message and continue with the transaction. It happens in MRHR transaction in 4.6. Now we are on ECC6.0 and user wants this functionality.
So is there any configuration to be done or so I need to write User Exit?
Please explain in details like where to make these config settings and all.
Thanks in advance.

Hi Harshal,
Make use of EXIT_SAPLMRMP_010 in Enchancement LMR1M001 User exits in Logistics Invoice Verification.
Raise your warning message by validating GSBER present in structure in exit's FM : EXIT_SAPLMRMP_010
hope this helps.
Regds,
abhee

Sync messages should have higher prioritization in IE than async messages

Hi there,
does somebody know how I can assign a higher prioritization to sync messages than to async messages in XI 3.0? In case of a bottleneck on the Integration Engine I want to get sync messages processed first. Message prioritization in SXMB_ADMIN does not work because it's ony applicable for async (EO / EOIO) messages.
Thank you.
BR,
Ralph N.
UPDATE: Since there doesn't seem to be a solution for this issue let me specify it. What kind of installation can be made in the landscape to separate sync messages physically from async messages?
Edited by: Ralph Nitschke on Jun 25, 2010 1:58 PM

hi,
i found some links, hope those helps you
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
http://wiki.sdn.sap.com/wiki/display/XI/DifferencebetweenSXMB_ADMandSXMB_ADMINISTRATION
Queue prioritization
** Queue Prioritization in SXMB_ADM - Tuning Param - Whats the difference
Also try searach in ussing by "queue prioritization" in SDN you will find many links
Thanks
Rodrigo P.
Edited by: Rodrigo Alejandro Pertierra on Jun 25, 2010 10:25 AM

When trying to upload a report as a PDF file to my clubs website, I get the message 'should be a PDF file', while it is a PDF file. What is wrong?

Writings, produced by me and some collegues are to be uploaded to some site. This writings are PDF files. When trying to upload an error message apperars, telling this file is NOT an PDF file. In Google Chrome and Opera there is no problem.

Hi H.Barker,
Zou is correct, LabVIEW supports all GIF bit depth images 24bit and below.
Thank you for forwarding the GIF images, I also experienced the same error when trying to import the "logo.gif" image in LabVIEW however I was able to import the image when I opened it in Microsoft Paint and resaved it as a new GIF.
This suggests there is a corruption in the original GIF file generated on the web, for example a "terminiating block" may be missing at the end of the GIF file. LabVIEW is not forgiving of GIF images that do not meet the GIF specification whereas other Windows editors may be, it seems that opening and resaving the GIF file in Microsoft Paint added the missing characters thus allowing for the file to be imported into LabVIEW.
I have attached the working GIF image to this post.
Hopefully this assists with your application H.Barker.
Many Thanks
Jamie S.
Applications Engineer
National Instruments
Attachments:
LOGO GIF (2).gif ‏34 KB

Warning Message Should come if actual delevery date is before planned date

Dear all;
is there any settings to set
Warning Message if actual delevery date is before planned delevery date mentioned in the PO?
Thanking You;
Regards;
Joydeep Mukherjee

Hi,
Goto the below path,
SPRO->Materials MAnagement->Purchasing->Environment Data->Define Attributes of System Messages
Click on new entries & maintain your relevant message & mark it as 'W' in the category.
Regards,
Divya

Dubious console message, should I be concerned?

This isn't really a development question, but I'm thinking it's a question developers might know.
Ever since installing leopard, seems like several of my apps are generating console events that look like a bad thing. They generally come from _NSAutoreleaseNoPool(), for example, here's one (of the six) that I get when I run openOffice:
soffice.bin[793] * _NSAutoreleaseNoPool(): Object 0x2960e40 of class NSPathStore2 autoreleased with no pool in place - just leaking
Which is followed by a stack dump list. Is this due to a faulty leopard installation, a bad app, or not a problem...just looks like one.
Thanks,
Bob

Something is buggy. Not necessarily Open Office, though.
I'm seeing similar messages on Tiger associated with Finder and Firefox. If I quit Finder and restart it, I don't see the messages again. If I log into another account, I don't see the messages.
So I think I've got buggy software - but likely not Finder and probably not Firefox. (At least, I think Finder is buggy but that's just how it is designed and an entirely different issue!)
In any case, it might or might not be OpenOffice that is really at fault.
I've also got X11 problems which I think are related...

Nokia Messaging should have threaded emails

Hi everyone,
I've been using Nokia Messaging (NM) for a year and have to deal with a great number of emails everyday. Most of them were sent from my friends in my company via "Reply To All" options. When I browse my emails by pressing N (next) and P (previous) buttons, NM will automatically scroll to the content part of the next/previous email without showing the name of the sender, and I have to scroll upwards to see the sender, that's a little bit annoy to me and waste of time.
So I hope Nokia will add the "threaded emails" option to the next update.
Thank you!

kvoras - do you still see the 3000+ "deleted" emails in your inbox on the phone?
If you no longer see these messages, and they're still there taking up "space", then this could conceivably be a problem for us all but we just won't be aware of it until the phone runs out of flash memory... but if we reflash our phones often enough (or never, if you're an N85 owner due to the complete lack of firmware updates - nudge nudge Nokia) it might never be a problem (although OTA firmware updates could make it more likely to occur).
And if you don't see the messages, how do you know they were the cause of the E71s crashing?
I've got my auto email delete set to 3 days, and so far it's deleting the messages - at least, they're not visible in my inbox...

Introducti​on message should be in a "Introduce yourself" forum

Similar Messages

Maybe you are looking for

Introduction message should be in a "Introduce yourself" forum