Introduction of tomtom

I have iPad but no GPS capablility. Lots of Qs
Do I have to upgrade to iPad 2 so that I can use Tomtom?
Is there a mount so that I can mount the iPad in my car to use as a navigator?
Can I use my iPad for skype?
Any help greatly appreciated...I've gone iPad crazy! I love it.
Cal55

Hi.
You can use a tom tom w any ipad that has 3 g. A wifi only pad will not provide a gps signal. Ifmyou have a wifi only, then you need an external gps devise. At that point you are better off getting a garmin. (or a tomtom). Note, tomtom is a real expensive app. Tead the reviews carefully to make sure it does what you want.
There are a number of mounts floating around. Google is your froed. The pad may be a bigger solution than you might need.
Yes, you can use skype. Look in the app store. Note, there is no camera in a pad1, so if that ismwhat youmhave, you will be doing voice only calls.
For what it is worth, i think the built in map program is pretty good. If you have a 3g pad, try that a while before you go for a 3rd party deal. As noted above, a wifi only pad is not going to make a good gps device, no matter what program you use.

Similar Messages

How to connect my ipod to a tomtom gps?

Can't find solution for connecting my ipod classic 4GB to my Tomtom GPS GO910...

hi Michel,
Do not forget that you need to put the Livebox in "association" mode otherwise you will not succeed in connecting to your wifi network. (sur les Livebox Inventel, il faut appuyer sur le bouton "1" se trouvant à l'arrière. sur les Livebox Sagem, c'est un bouton à enfoncer près de la prise d'alimentation). The Livebox remains in "association" mode for 10 minutes, this gives you enough time to enter your WEP key..
Plus d'info sur le mode d'emploi de ta Livebox.
Bye,
/Phil

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running google maps app on the phone. Siri cannot seem to get me to a specific address. Where does the problem lie? Thanks.

Apple maps has received a poor performance rating just after introduction of the iPhone 5. I am running Google Maps app on the phone. SIRI cannot seem to get me to a specific address. Where does the problem lie? Also can anyone tell me the hierarchy of use between the Apple Maps, SIRI, and Google maps when the app is on the phone? How do you choose one over the other as the default map usage? Or better still how do you suppress SIRI from using the Apple maps app when requesting a "go to"?
I have placed an address location into the CONTACTS list and when I ask SIRI to "take me there" it found a TOTALLY different location in the metro area with the same street name. I have included the address, the quadrant, (NE) and the ZIP code into the CONTACTS list. As it turns out, no amount of canceling the trip or relocating the address in the CONTACTS list line would prevent SIRI from taking me to this bogus location. FINALLY I typed in Northeast for NE in the CONTACTS list (NE being the accepted method of defining the USPS location quadrant) , canceled the current map route and it finally found the correct address. This problem would normally not demand such a response from me to have it fixed but the address is one of a hospital in the center of town and this hospital HAS a branch location in a similar part of town (NOT the original address SIRI was trying to take me to). This screw up could be dangerous if not catastrophic to someone who was looking for a hospital location fast and did not know of these two similar locations. After all the whole POINT of directions is not just whimsical pasttime or convenience. In a pinch people need to rely on this function. OR, are my expectations set too high?
How does the iPhone select between one app or the other (Apple Maps or Gppgle Maps) as it relates to SIRI finding and showing a map route?
Why does SIRI return an address that is NOT the correct address nor is the returned location in the requested ZIP code?
Is there a known bug in the CONTACTS list that demands the USPS quadrant ID be spelled out, as opposed to abreviated, to permit SIRI to do its routing?
Thanks for any clarification on these matters.

siri will only use apple maps, this cannot be changed. you could try google voice in the google app.

Is there Any way to get TomTom Traffic info From 3G

Having purchased the 3Gi phone and being assured it is compatable with TomTom Go 720 I was gutted to find that a great phone does not support Tom Tom traffic inf & Updates. Great Phone, Great Sat Nav,No Compatability. Whats Going On!! My previuos "SIMPLE" little Sony ericsson K510i did the job well, Now what do I Do , Sling the iphone? Apple and TomTom "have" to give us a solution as many others will get caught out owning two good products!!

The iPhone is compatible with many PNDs that support Bluetooth, but only for hands free operation (speaker phone so you don't have to hold the iPhone to drive). That is the only connectivity allowed by bluetooth, and that works with the Tom Tom.
The Tom Tom can not use your wireless network to fetch data via bluetooth (or a wired connection for that matter), because access to the Edge/3G data network by devices attached to the iphone is restricted by ATT.
Currently, the only traffic service available for TomTom devices in the USA utilizes a data connection on a mobile phone to retrieve the traffic information. However that service is difficult to use for many people because there are only a handful of compatible phones and compatible phone data plans from carriers here in the USA. However it appears that is soon about to change as it looks like TomTom will soon unveil a RDS-TMC traffic solution in the USA. So what is the advantage of this type of delivery? Instead of relying on a (sometimes costly) data plan from your phone carrier, this service receives information over radio waves through a special antenna.

Re-write numerical page numbers to roman numerals for an introduction?

Hi there everybody,
I've been attempting (for some considerable time!) to typeset and format a book. The book needs to have roman numerals running from the first title page (which is in reality left blank through using a secondary master page without page numbers). However, I didn't realise I would need to use roman numerals in the introduction, and instead started the page numbers from the first title page of the introduction. Therefore, my pages that are numbered by roman numerals (copyright page etc) stop at this point and in the introduction become numbers.
I need to change it so it is roman numerals up until the first page of the actual book, all through the introduction, but when I try to change it in the Numbers and Sections tab, it tells me that i've already used the numbers i've typed in.
Basically I would like to know how to take off the first set of roman numeral page numbers and start again??
I'm very confused!! Help would be MUCH appreciated.
Lucy

Is this any help?
Working with Page Numbers and Sections | Managing Pages and Books with Adobe InDesign CS6 | Que

How do I copy the introduction of a project to other projects?

I am trying to find out how to copy the introduction (video clip + title + audio clip) of my video series from one project to another.... so far, the only information I can find tells me to 'open both projects at once'.... I have searched everywhere and cannot figure out how to open multiple projects at once.... i can copy the video clip to a new project, but the title and audio track don't come with it... they won't drag and drop nor copy and paste into the new project. I plan to have many episodes of my video series, and want my standard introduction to be at the beginning of each new project, without having to do the title and audio from scratch each time, like i am doing now.
thanks for any help.....

Does this mean I would have to then delete all the other clips/audio, etc from the new, duplicated project? Surely there must be a way to just copy one section into a new project. I start making some of the new projects in advance, and want to drop the intro into the beginning... if I already have the next three or four 'episodes' (projects) already started, the duplication thing won't work.....

My new TomTom doesn't seem to work with my MacBook Pro (OS version 10.7.2). Is there any way I can make it work?

The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro? Does Apple want to drive us into using PCs or what is going on? Is there a driver or some other clever means of making the TomTom work as they used to work with Macs? This is an urgent question - please help if you can! Thanks. Bill

coxorangepippin wrote:
The message that comes up when I click on "TomTom Home Install" is "You cannot open Home Install because Power PC applications are no longer supported." Does this mean that the TomTom, which is absolutely vital to my life - well, not literally but you know what I mean - can no longer be used with my MacBook Pro?
What that means is that is can't be used with Lion 10.7. PowerPC was the chip Apple used up until 2006 when they switched to Intel. At that point, they created the Rosetta emulator to allow for PPC support for 5 years. They finally dropped the support with the release of Lion. It will only work with OS X 10.6 or earlier. The other option is to purchase a new GPS, which can be had for $100 for a decent one.

How do I reeve the TomTom application from my MacPro Notebook. Application continues to run and will not stop. I bought a Tom Tom GPS and installed the connect app but decided to return the GPS. There seems to be no way to remove the software.

How do I remove the TomTom GPS software from my MacPro. I bought the GPS and began to install the software but decided to return the GPS. The software will not delete and continues to run trying to connect to the GO 60. I have 10.9.5 OS.
Tanks to anyone who may help.

Hi ..
Follow the instructions here > How To Completely Uninstall Software under Mac OS X

Introduction to regular expressions ...

I'm well aware that there are already some articles on that topic, some people asked me to share some of my knowledge on this topic. Please take a look at this first part and let me know if you find this useful. If yes, I'm going to continue on writing more parts using more and more complicated expressions - if you have questions or problems that you think could be solved through regular expression, please post them.
Introduction
Oracle has always provided some character/string functions in its PL/SQL command set, such as SUBSTR, REPLACE or TRANSLATE. With 10g, Oracle finally gave us, the users, the developers and of course the DBAs regular expressions. However, regular expressions, due to their sometimes cryptic rules, seem to be overlooked quite often, despite the existence of some very interesing use cases. Beeing one of the advocates of regular expression, I thought I'll give the interested audience an introduction to these new functions in several installments.
Having fun with regular expressions - Part 1
Oracle offers the use of regular expression through several functions: REGEXP_INSTR, REGEXP_SUBSTR, REGEXP_REPLACE and REGEXP_LIKE. The second part of each function already gives away its purpose: INSTR for finding a position inside a string, SUBSTR for extracting a part of a string, REPLACE for replacing parts of a string. REGEXP_LIKE is a special case since it could be compared to the LIKE operator and is therefore usually used in comparisons like IF statements or WHERE clauses.
Regular expressions excel, in my opinion, in search and extraction of strings, using that for finding or replacing certain strings or check for certain formatting criterias. They're not very good at formatting strings itself, except for some special cases I'm going to demonstrate.
If you're not familiar with regular expression, you should take a look at the definition in Oracle's user guide Using Regular Expressions With Oracle Database, and please note that there have been some changes and advancements in 10g2. I'll provide examples, that should work on both versions.
Some of you probably already encountered this problem: checking a number inside a string, because, for whatever reason, a column was defined as VARCHAR2 and not as NUMBER as one would have expected.
Let's check for all rows where column col1 does NOT include an unsigned integer. I'll use this SELECT for demonstrating different values and search patterns:
WITH t AS (SELECT '456' col1
             FROM dual
            UNION
           SELECT '123x'
             FROM dual
            UNION
           SELECT 'x123'
             FROM dual
            UNION
           SELECT 'y'
             FROM dual
            UNION
           SELECT '+789'
             FROM dual
            UNION
           SELECT '-789'
             FROM dual
            UNION
           SELECT '159-'
             FROM dual
            UNION
           SELECT '-1-'
             FROM dual
SELECT t.col1
FROM t
WHERE NOT REGEXP_LIKE(t.col1, '^[0-9]+$')
;Let's take a look at the 2nd argument of this REGEXP function: '^[0-9]+$'. Translated it would mean: start at the beginning of the string, check if there's one or more characters in the range between '0' and '9' (also called a matching character list) until the end of this string. "^", "[", "]", "+", "$" are all Metacharacters.
To understand regular expressions, you have to "think" in regular expressions. Each regular expression tries to "fit" an available string into its pattern and returns a result beeing successful or not, depending on the function. The "art" of using regular expressions is to construct the right search pattern for a certain task. Using functions like TRANSLATE or REPLACE did already teach you using search patterns, regular expressions are just an extension to this paradigma. Another side note: most of the search patterns are placeholders for single characters, not strings.
I'll take this example a bit further. What would happen if we would remove the "$" in our example? "$" means: (until the) end of a string. Without this, this expression would only search digits from the beginning until it encounters either another character or the end of the string. So this time, '123x' would be removed from the SELECTION since it does fit into the pattern.
Another change: we will keep the "$" but remove the "^". This character has several meanings, but in this case it declares: (start from the) beginning of a string. Without it, the function will search for a part of a string that has only digits until the end of the searched string. 'x123' would now be removed from our selection.
Now there's a question: what happens if I remove both, "^" and "$"? Well, just think about it. We now ask to find any string that contains at least one or more digits, so both '123x' and 'x123' will not show up in the result.
So what if I want to look for signed integer, since "+" is also used for a search expression. Escaping is the name of the game. We'll just use '^\+[0-9]+$' Did you notice the "\" before the first "+"? This is now a search pattern for the plus sign.
Should signed integers include negative numbers as well? Of course they should, and I'll once again use a matching character list. In this list, I don't need to do escaping, although it is possible. The result string would now look like this: '^[+-]?[0-9]+$'. Did you notice the "?"? This is another metacharacter that changes the placeholder for plus and minus to an optional placeholder, which means: if there's a "+" or "-", that's ok, if there's none, that's also ok. Only if there's a different character, then again the search pattern will fail.
Addendum: From this on, I found a mistake in my examples. If you would have tested my old examples with test data that would have included multiple signs strings, like "--", "-+", "++", they would have been filtered by the SELECT statement. I mistakenly used the "*" instead of the "?" operator. The reason why this is a bad idea, can also be found in the user guide: the "*" meta character is defined as 0 to multiple occurrences.
Looking at the values, one could ask the question: what about the integers with a trailing sign? Quite simple, right? Let's just add another '[+-] and the search pattern would look like this: '^[+-]?[0-9]+[+-]?$'.
Wait a minute, what happened to the row with the column value "-1-"?
You probably already guessed it: the new pattern qualifies this one also as a valid string. I could now split this pattern into several conditions combined through a logical OR, but there's something even better: a logical OR inside the regular expression. It's symbol is "|", the pipe sign.
Changing the search pattern again to something like this '^[+-]?[0-9]+$|^[0-9]+[+-]?$' [1] would return now the "-1-" value. Do I have to duplicate the same elements like "^" and "$", what about more complicated, repeating elements in future examples? That's where subexpressions/grouping comes into play. If I want only certain parts of the search pattern using an OR operator, we can put those inside round brackets. '^([+-]?[0-9]+|[0-9]+[+-]?)$' serves the same purpose and allows for further checks without duplicating the whole pattern.
Now looking for integers is nice, but what about decimal numbers? Those may be a bit more complicated, but all I have to do is again to think in (meta) characters. I'll just use an example where the decimal point is represented by ".", which again needs escaping, since it's also the place holder in regular expressions for "any character".
Valid decimals in my example would be ".0", "0.0", "0.", "0" (integer of course) but not ".". If you want, you can test it with the TO_NUMBER function. Finding such an unsigned decimal number could then be formulated like this: from the beginning of a string we will either allow a decimal point plus any number of digits OR at least one digits plus an optional decimal point followed by optional any number of digits. Think about it for a minute, how would you formulate such a search pattern?
Compare your solution to this one:
'^(\.[0-9]+|[0-9]+(\.[0-9]*)?)$'
Addendum: Here I have to use both "?" and "*" to make sure, that I can have 0 to many digits after the decimal point, but only 0 to 1 occurrence of this substrings. Otherwise, strings like "1.9.9.9" would be possible, if I would write it like this:
'^(\.[0-9]+|[0-9]+(\.[0-9]*)*)$'Some of you now might say: Hey, what about signed decimal numbers? You could of course combine all the ideas so far and you will end up with a very long and almost unreadable search pattern, or you start combining several regular expression functions. Think about it: Why put all the search patterns into one function? Why not split those into several steps like "check for a valid decimal" and "check for sign".
I'll just use another SELECT to show what I want to do:
WITH t AS (SELECT '0' col1
             FROM dual
            UNION
           SELECT '0.'
             FROM dual
            UNION
           SELECT '.0'
             FROM dual
            UNION
           SELECT '0.0'
             FROM dual
            UNION
           SELECT '-1.0'
             FROM dual
            UNION
           SELECT '.1-'
             FROM dual
            UNION
           SELECT '.'
             FROM dual
            UNION
           SELECT '-1.1-'
             FROM dual
SELECT t.*
FROM t
;From this select, the only rows I need to find are those with the column values "." and "-1.1-". I'll start this with a check for valid signs. Since I want to combine this with the check for valid decimals, I'll first try to extract a substring with valid signs through the REGEXP_SUBSTR function:
NVL(REGEXP_SUBSTR(t.col1, '^([+-]?[^+-]+|[^+-]+[+-]?)$'), ' ')Remember the OR operator and the matching character collections? But several "^"? Some of the meta characters inside a search pattern can have different meanings, depending on their positions and combination with other meta characters. In this case, the pattern translates into: from the beginning of the string search for "+" or "-" followed by at least another character that is not "+" or "-". The second pattern after the "|" OR operator does the same for a sign at the end of the string.
This only checks for a sign but not if there also only digits and a decimal point inside the string. If the search string fails, for example when we have more than one sign like in the "-1.1-", the function returns NULL. NULL and LIKE don't go together very well, so we'll just add NVL with a default value that tells the LIKE to ignore this string, in this case a space.
All we have to do now is to combine the check for the sign and the check for a valid decimal number, but don't forget an option for the signs at the beginning or end of the string, otherwise your second check will fail on the signed decimals. Are you ready?
Does your solution look a bit like this?
WHERE NOT REGEXP_LIKE(NVL(REGEXP_SUBSTR(t.col1,
                           '^([+-]?[^+-]+|[^+-]+[+-]?)$'),
                       '^[+-]?(\.[0-9]+|[0-9]+(\.[0-9]*)?)[+-]?$'
                      )Now the optional sign checks in the REGEXP_LIKE argument can be added to both ends, since the SUBSTR won't allow any string with signs on both ends. Thinking in regular expression again.
Continued in Introduction to regular expressions ... continued.
C.
Fixed some embarrassing typos ... and mistakes.
cd

Excellent write up CD. Very nice indeed. Hopefully you'll be completing parts 2 and 3 some time soon. And with any luck, your article will encourage others to do the same....I know there's a few I'd like to see and a few I'd like to have a go at writing too :-)

Disappointed with product introduction

I am new to FrameMaker. Based on its popularity and others' comments, I'm sure it is a fascinating, feature-packed program that can do a lot for me in my technical writing. However, I am disappointed with Adobe's lack of introduction to the product. Any product should come with material that tells me what is special about it and who is meant to use it. It should also have sample work to show what can be done with the product. Instead, Adobe begins with a Getting Started with FrameMaker that introduces the user interface and screen basics, which are not yet of concern at this introductory stage. Note also that there is a section called "What's new in FrameMaker 9", clearly oriented to past users, but totally ignoring the need of new users to learn about the essence of FrameMaker.
I hope the folks at Adobe are listening and will provide some introductory material. I would be most thankful for it.

hmm63 wrote:
I am new to FrameMaker. Based on its popularity and others' comments, I'm sure it is a fascinating, feature-packed program that can do a lot for me in my technical writing. However, I am disappointed with Adobe's lack of introduction to the product. Any product should come with material that tells me what is special about it and who is meant to use it. It should also have sample work to show what can be done with the product. Instead, Adobe begins with a Getting Started with FrameMaker that introduces the user interface and screen basics, which are not yet of concern at this introductory stage. Note also that there is a section called "What's new in FrameMaker 9", clearly oriented to past users, but totally ignoring the need of new users to learn about the essence of FrameMaker.
I hope the folks at Adobe are listening and will provide some introductory material. I would be most thankful for it.
I agree that it's hard to find good getting started training materials in the FrameMaker package that you buy. Some versions of FrameMaker were shipped with a training disk, or with training materials on the main disk. I'm not sure if recent versions do.
Recently some Adobe products have come with a 30-day free subscription to Lynda.com online training. Sometimes there's something in the package that tells you about these goodies, and other times you'll get email that tells you about them. You probably have to register your software at Adobe.com. You'll need to create an Adobe user account (free) if you don't have one. The adobe.com site isn't easy to find your way around. On the home page, type register in the search box at the top right, click Product Registration, and the registration log-in page appears. You can create an account if you need to.
Search Google for terms like "adobe.tv framemaker tutorial," "free online video training framemaker," and "framemaker training resources" without quotes for some good links. These searches include content from the official adobe.com site as well as others.
Forum participants are users who volunteer to help others in the community, as they've been helped - passing a torch. You're always welcome to post questions here. It's most helpful to would-be helpers if you state the subject of your question clearly, one question or problem per message thread. And, provide your exact version of FrameMaker; it's the version number (like 9.1) and the build number (pxxx) displayed with Help > About FrameMaker.
And, you can help others who struggle to find good introductory material in the package by posting a formal request at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Reg: introduction of DTP and Transformation in BI 7.0

Hi all,
I've two questions here one is:
1. what is the purpose of introduction of DTP with NW 7.0 BI 7.0
i know the bcoz of these reasons:
>Improved transparency of staging processes across data warehouselayers
>Improved performance:Intrinsic parallelism
>Separation of deltamechanism for differentdata targets: deltacapability is controlledby the DTP..
>Enhanced filtering indataflow..
>Repair modus based ontemporary buffers (bufferskeep complete set of data)
but can any one explain me how this happens in detail.
coming to my question 2.
Why transformation replaced tranfer rules and update rules
(excluing graphical UI)
Regards
Ganesh

>Improved transparency of staging processes across data warehouselayers
PSA to multiple datatargets allows you transparency and overcomes the spiderweb of export datamart
>Improved performance:Intrinsic parallelism
need not have to wait for one infoprovider to load(datamart) to load the consecutive dataprovider - data can be parallely loaded to different providers at the same time once the data is in PSA
>Separation of deltamechanism for differentdata targets: deltacapability is controlledby the DTP..
delta in DTP's is governed by datamart status
>Enhanced filtering indataflow..
you can set ur filters independent of any other dataproviders like in datamarts .
>Repair modus based ontemporary buffers (bufferskeep complete set of data)
error stack allow you to resurrect the data and load it again
Why transformation replaced tranfer rules and update rules
transformations and DTP have 1:1 relationship - so if u pretty sure to use DTP (ur 1st question) - the pre req would be to have transformation - u can create a DTP only after you create a transformation(source and target mapping )

How do I get routing data from the Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application.

I have a tableView displaying a list of contacts from a Cloud Database. After selecting a contact, I push to a programmatically created MKMapView. Then I display the initial region (the view) that includes the users current location (starting point) and their selected destination (end point).
Now I want to display annotations (as described in the Location Awareness Programming Guide) that displays polylines which will represent the turn-by-turn navigation IN MY OWN APPLICATION, and not in the Map App currently used in IOS6.
Due to licensing and its becoming depricated in IOS 6, I do not want to get routing data from the Google Maps API. How do I get routing data from the IOS 6 Map App (powered by TomTom) so I can display the point-to-point annotations (turn-by-turn navigation) without leaving my own application?
I checked out Stack Overflow and other forums which basically left me with the impression that this is not possible. I also checked out the TomTom iPhone Mobile SDK User Guide from the TomTom Developer Portal and am still confused. It must be possible to retrieve routes, since the Map App can display turn-by-turn directions. How can I retrieve turn-by-turn data that I may display as a route within my own application?

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

I tried to upgrade my TomTom all on my iPhone 4S and it said 'not enough space' - go to settings. In settings it shows there's plenty of space. What next?

I have tried to upgrade my TomTom app on my iPhone 4S and it failed saying 'Not enough spare space - manage your space in settings.' When I looked in Settings it shows there's plenty of spare space. The bloke at the Apple Store was baffled..... and said I needed an appt. at Apple. "Go and join the queue." When I got to the front of the queue another bloke said "There are no appointments available. You have to book one over there online...". When I went over there and tried to book one, it said "you can't book an appt until you've spoken to the Help Dept." And gave me a number. I phoned the help line and a machine said "We're all busy."
Any ideas?

Hi, When you download, a big app udate like Tom Tom The other Tom Tom maps will be still on iphone until new update is complete That i why you need a lot of space until old updates Delete. So you will need to delete Apps & photos to make space. How much Gig has your iphone 4 s got? Cheers Brian

Nice introduction's link for this 10g new feature

As starting point for future discussion in this forum i post a link with a small introduction of Oracle Expression Filter: http://www.oracle.com/technology/oramag/oracle/05-may/o35sql.html
The official Oracle documentation:
- Oracle® Database Application Developer's Guide - Expression Filter
10g Release 1 (10.1):
http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10821/toc.htm
- Oracle® Database Application Developer's Guide - Rules Manager and Expression Filter
10g Release 2 (10.2):
http://download-east.oracle.com/docs/cd/B19306_01/appdev.102/b14288/toc.htm
I never used this feature before, but I can start now ;-)
Cheers, Aron

Thanks Aron. Please let us know how it goes, if you are so inclined.
There is also a new page on OTN for Expression Filter and Rules Manager resources at
http://www.oracle.com/technology/products/database/rules_manager/index.html
Regards,
Bill Beauregard
Principal Product Manager
Message was edited by:
wbeaureg

Mydrive,from TomTom, will not update in Firefox but will in Internet Explorer.Can you please advise

My TomTom device requires updating using 'Mydrive'. This used to work in Firefox but does not now. It will work if loaded through Internet explorer

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.org/kb/how-clear-firefox-cache
*https://support.mozilla.org/kb/Deleting+cookies
*http://kb.mozillazine.org/Websites_look_wrong

Introduction of tomtom

Similar Messages

Maybe you are looking for