Introscope Host Adapter - All configured Enterprise Managers are offline Error

I am getting the following error in Step 8 in the managed systems set. Can anyone please help. The setup is for BWP (ABAP stack), these steps have worked without error for other similar systems in the landscape.
Details of error are as follows:
Host agent etc seems ok. Any suggestions please?

Hi Tariq,
Check whether enterprise manage is up or not.
Goto the directory of /usr/sap/wilyintroscope and then to bin directory.
1. Check the status of Enterprise manager by running the command EMCtrl -status
if not running start the enterprise manager by using the command ./EMCtrl start command.
2. Telnet the port of Enterprise manager
telnet <EM Host> 6001
3. Also provide the full access to the folder /usr/sap/wilyintroscope or /usr/sap/ccms/wilyintroscope
4. Checked the logs for introscopeEnterpriseManager.log and introscopeEnterpriseManagerSupport.log
Follow the SCN discussion as well
Wily Enterprise Manager and SolMan 7.1 SP4
With Regards
Ashutosh Chaturvedi

Similar Messages

Introscope host adapter

Hi
I am using solution manager 7.1 sp10
While configuring our new server in managed system configuring on step 7 configure automatically I get error at introscope host adater as below:
CX_AI_SYSTEM_FAULT : SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_TIMEOUT")
CX_SOAP_FAILURE : Error when processing Web service call
CX_SOAP_CORE : Error when calling SOAP Runtime functions: SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_TIMEOUT")
I checked parameter icm/server_port_0 it has correct value PROT=HTTP,PORT=80$$,TIMEOUT=300,PROCTIMEOUT=600
Then I check other servers which were connected successfully now they all are showing error at this step
Anyone has any idea how to solve this issue and why this issue is started?

Hi,
Check the below notes,
1962821 - Introscope Host Adapter setup activity fails because of a timeout
Rg,
Karthik

I updated my iMac, and my mail no longer works. It says all of my accounts are "offline". Safari is fine. How do I get my accounts back online?

I updated my iMac and now my Mail does not work. It says all of my accounts are"offline". Safari is fine. How do I get my accounts back online?

Hello there, Lynn.
The following Knowledge Base article explains and offers up some troubleshooting recommendations for issues with email acounts showing offline on Mac Mail:
Mail (Mavericks): If a mailbox is offline
http://support.apple.com/kb/PH14925
Lightning bolt icons next to mailboxes in the Mail sidebar identify accounts that are offline.
To take an account online, click the lightning bolt icon. Or choose Mailbox > Online Status > Take [account name] Online, or Mailbox > Take All Accounts Online.
If you can’t take an account online, make sure you’re connected to the Internet. If a warning icon appears after the account name, click it for more information.
Use Connection Doctor
Some mailbox names can appear dimmed if you don’t have permission to access them, such as “public” mailboxes on a server, or if the mail server is unavailable.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

My iMessages stopped working on my iMac but still works on my ipad. it is telling me all of my contacts are offline on my mac but on my ipad it all works fine

my iMessages stopped working on my iMac but still works on my ipad. it is telling me all of my contacts are offline on my mac but on my ipad it all works fine

Hi...
With iMessages open on yuour iMac, from the menu bar top of your screen click Messages > My Status
You can select Off or Online as necessary from there.

ITunes match has deleted a playlist and all my itunes library are showing errors on my mac, it wont update

I have logged into iTunes on my Mac and found that one of my playlists has been wiped and that every single of my 12000 songs has an error saying that it cant be loaded in itunes match when they are all there.

Kind of a similar issue. I have long recordings of a radio show I like to catch up on on my mobile devices. All of this kind of media were greyed out and yet initally played. Then they would not play after a sync but could be seen. Also palyback position was lost despite being set in options. Crudley fixed by turning iTunes Match off on the device and resync. KInd of defeats the object of the subscrition though. :-(
Obviously its a great idea to have everung backed up in the Cloud but there's still a lot of user niggles coming to light it seems. Good luck.

All Mail outgoing server are offline

All of my outgoing mail servers are claiming to be offline. The connection doctor says that they are connected to the server with no problem, but I can't send any outgoing mail. I can receive mail, but cannot respond.
please help!

Just called apple support (no wait on hold! Once again, really good customer service...) and wouldn't you know it, while I was talking to the support staff, I fixed the problem myself. Then the mail specialist got online and told me to do something similar to what I had done. Here's the fix. Try THEIRS first:
Mine: Go to finder - home -- library -- preferences.
Find the file called "com.apple.mail.plist" and drag it to the trash and empty trash. Restart mail. You will have to re-enter all your account info and all your mail on your server will have to be downloaded again. I use IMAP and everything is stored, so that wasn't a big deal for me. Once I re-entered all the account info, outgoing worked again.
THEIRS: In preferences, open a new account (use the + sign in the accounts pane in "Preferences"). Give it a different name but put in all your info. See if it works. If it does, delete the other account.
Theirs is a little safer, I guess. Make sure you back up messages, though.
Good luck.

All Photos in library are "offline or missing"

All photos say that the file is either offline or missing in LR4. Cannot export or do anything with any photos in library. I cannot find the files anywhere on the computer. Need help.

A-M:
Welcome to the Apple Discussions and Merry Christmas (hope this doesn't ruin your Christmas).I get "Unreadable Files
That message comes up because you're trying to import a file that is inside the iPhoto Library folder. That can't be done. That file is the file where your album information is stored. It belongs there. Don't mess with it.
First make a duplicate of your iPhoto Library folder - select it and type Command-D. Now launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library. Select all the options except the last one regarding the orphaned files. That should rebuild your library and keep most of your organizational efforts intact. You may have some files that end up in a "Recovered" roll and/or album. See if that doesn't work. Good luck.

I can not make a "Automated Installation of the Introscope Agent" (Managed System Configuration, p.7)

I can not make a "Byte Code Adapter Installation"
When I open meets both paragraphs in step Managed System Configuration is somewhat obscure situations that do not allow the automatic configuration Introscope agent and Introscope Manager
Please help to resolve a number of questions that might help me complete the setup :
1. Why has the status of Enterprise Manager : <No Enterprise Manager configured> ( see picture)
I set up Enterprise Manager in accordance with the installation instructions and complied with all the setting items . Since without any configuration can be associated with the appearance of this status ?
2 . Why Server Node is empty detail settings ?
JDK Location:
Enterprise Manager Host:
Enterprise Manager Port:
Introscope Agent Name:
Introscope Agent Profile:
Autoprobe Directives:
Wily Version:
Introscope Agent Version:
Introscope Agent Log Location:
3 . What a mistake ($ MC: DIAG_WILY_MSG: 032 : L), which appears when I click configuration "Configure Introscope Agent Setup ...", and what it can be linked ? ( see picture )
And the last question , which is also linked to the process of automatic configuration and refers to a phrase from the instruction (Introscope Version 9
Installation Guide For SAP July 2012) points out "Automated Installation of the Introscope Agent via SMD"
there is such an item:
2 . Deploy ISAGENTJ5 *. SCA which is the Introscope Java Agent 9 with SDM to Solution Manager. You may need to deploy also ISAGENT *. SCA which is Introscope Java Agent 8.
However, nowhere does it say where exactly ( on what the absolute path ) I must perform unloading and then what to do with this discharge

The problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

Introscope Host Agent for ABAP only instance, fails with java.lang.NullPoin

Hello,
I'm trying to configure the Introscope Host Agent Adapter for ABAP 7.02 instance.
Solman Version is 7.1 ST 4, BASIS SP9.
I did created the Trust relationship between DAA and hostctrl and
also the same setup working find for Java Instance or ABAP+java Instance,
I'm not sure whether IS Adapter can be installed for ABAP only Instance.
Log file from Solman:
java.lang.NullPointerException
at com.sap.smd.server.manager.SMDPluginProperties.setProperty(SMDPluginProperties.java:119)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.setJCoUserAndPwd(AgentConfigWriter.java:1085)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.setLogonData(AgentConfigWriter.java:1075)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.createJcoDestinationVO(AgentConfigWriter.java:677)
at com.sap.sup.admin.wily.hostagent.config.AgentConfigWriter.prepareSapAgentConfiguration(AgentConfigWriter.java:284)
at com.sap.sup.admin.wily.hostagent.Setup.setupAgentConfiguration(Setup.java:272)
Thanks
Srikanth M

Hi
I am sure, it is logically incorrect, how you deploy byte code agent in abap only instance
Introscope Bytecode Agent runs on managed systems based on J2EE engines to report data to the Introscope Enterprise Manager, so it has to be setup only for Java Stacks.
Please check with the wily config guide again.
I am watching this thread for further view from others.
Thanks,
Jansi

ACF2 Scripted Host Adapter | Add groups to users

I am exploring options to provision to ACF2. We need to assign ACF2 groups to users and the ACF2 resource (or mainframes) behave different from other resources. Users get assigned into groups rather than groups getting added to the user.
To accommodate this we plan to use the ScriptedHost adapter and write a ResourceAction Update script to actually add the user to the group requested. The side effect to this approach is that we now need to code scripts for all other actions like create, delete, disable, enable etc.. Is this how everybody does it - or is there a better approach? I am thinking around the lines of after actions with an ACF2 adapter...
Also - once you create the scripts as resource actions in the ScriptedHost adapter, do we have control to call them whenever we like - or are they automatically triggered - like the Create resourceaction script is called when a user is assigned the scriptedhost as a resource. So apart from configuring the different script names in the ScriptedHost resource wizard, nothing else needs to be done to make the provisioning work with the ACF2 resource?
And is the order of script execution automatically maintained - like Login action is called first before the Create action and finally the Logoff action.
Thanks in advance.

Hey Anokun,
I am reading up on how to create Scripted Host Adapters. I will be creating 13 of them soon. I have looked over all the docs I could find and am still a little bit lost. I think that the samplescreenactions can be used as a template. I'm still not quite sure how to go about creating these actual Adapters. I would was wondering if you had an example of a scripted host adapter you had that you could share with me.
Thanks,
Nik

Error while configuring Enterprise manager

Hello,
I want to configure enterprise manager, while creating a new database using database configuration assistant in oracle 11g i am getting following error message
*"Configuring database with database control requires a listener to be configured in the current oracle home.
You need to run Netca to configure a listener before you can procede. Otherwise you may choose o continue with out Database control configuration"*
My OS is Windows 7
is there any other way to configure Enterprise manager OR do i need to install any specific package
Thank you friends.

Hi, Finally i created a listener "KUMAR"
*Microsoft Windows [Version 6.1.7600]*
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\praveen kumar gogula>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 22-SEP-2011 17:50
*:44*
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias                     KUMAR
Version                   TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date                22-SEP-2011 17:44:58
Uptime                    0 days 0 hr. 5 min. 48 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   C:\oracle\product\11.2.0\dbhome_1\network\admin\listen
er.ora
Listener Log File         c:\oracle\diag\tnslsnr\praveenkumarg\kumar\alert\log.x
ml
Listening Endpoints Summary...
*(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=praveenkumarg)(PORT=1521)))*
*(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))*
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "praveen" has 1 instance(s).
Instance "praveen", status READY, has 1 handler(s) for this service...
Service "praveenXDB" has 1 instance(s).
Instance "praveen", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Users\praveen kumar gogula>
What to do next?

BizTalk Runtime configuration error - "Creation of Adapter FILE Configuration Store entries failed"

Hi,
I am trying to install Biztalk Server 2006 R2 on a Vista Ultimate
edition machine. I completed the installation successfully, and have
configured "Enterprise SSO" and "Group" features. I am getting the
following error while configuring the BizTalk Runtime feature.
"Creation of Adapter FILE Configuration Store entries failed.
The SSO system is currently disabled."
I have already done/tried the following:
1. I tried different settings - Inprocess only, Inprocess and
isolated, each trusted, each with a regular user account and each with
an administrator user account. In all cases I get the same error.
2. I have made the changes suggested here (related to rpc
authentication changes after Windows XP SP2) but it still doesnt
change anything: http://blogs.msdn.com/scottwoo/archive/2004/05/19/135453.aspx
Any suggestions?
Thanks in advance,
Anand

I'm having a similar installation error on an XP SP2 box and was getting the same error message (Creation of Adapter FILE Configuration Store entries failed. The SSO system is currently disabled.). I checked and the Enterprise SSO application is not appearing in the list of services, and doing a command line "net start ENTSSO" returns an invalid service error.
So going on the theory that SSO did not install correctly and get registered as a server, I went ahead and uninstalled BizTalk/SSO, blew away BTS/SSO databases, and tried to reinstall (selected all options for install).
After BizTalk installed, I entered a local admin account and chose "Custom" installation. Because the error message pointed at an SSO problem, I tried to apply the SSO configuration ONLY, using the default SSO Administrator/Affiliate Administrator accounts with the default admin account, but it keeps failiing at the same point in the install log when it tries to start SSO (see log below).
[10:30:51 AM Info ConfigHelper] Creating service: ENTSSO, start type: 2, exe: "C:\Program Files\Common Files\Enterprise Single Sign-On\ENTSSO.exe", dependencies: RPCSS,COMSysApp,MSSQLSERVER, account: .\bizservice
[10:30:51 AM Info ConfigHelper] bizservice is a local entity.
[10:30:52 AM Info ConfigHelper] Created service: ENTSSO
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:7370) CSSOServerCfg::ConfigureSCP
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:7445) NetScheduleJobAdd: nRc = 00000000, dwJobId = 1
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5697) CSSOServerCfg:tartService
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5721) The SSO service is starting.
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5852) ENTER: CSSOServerCfg::WaitServiceState
[10:30:52 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5892) The SSO service state is: The service is starting (SERVICE_START_PENDING)
[10:30:53 AM Info SSOServerCfg] (ssoconfigobj2.cpp:5892) The SSO service state is: The service is not running (SERVICE_STOPPED)
The SSO database does get created, but the SSO Administrators and SSO Affiliate Administrators local groups do not.
So my theory here is that for some reason SSO cannot start, the exception is caught and the app rolls back.
Any ideas?

Multiple host adapter framework caches in PI 7.1

When I go look at the caches in my PI system, I get multiple host adapter framework caches. That is, when I navigate to http/<host>:50000/dir, then select "Administration" in the upper right hand corner, and then select "Data Cache Overview" I see the following:
af.<sid1>.<hostname1>
af.<sid2>.<hostname2>
Integration server (ABAP) --> this is fine
Mapping Runtime Java --> points to <hostname1>
Mapping Runtime Java --> points to <hostname2>
I just did a system copy (export/import) and I changed all of the parameters. Unfortunately, not soon enough.
Any help is appreciated...

Dumb question:
Do you delete the integration server under the SLD technical systems? That is, "Integration Directory, Adapter Engine, Integration Repository, and RWB (these are all that shows up). If I delete the adapter engine there (it is assigned to the wrong domain), is that the right way?
Or do you do it in the "CIM Instances" --> Class --> XI Adapter Framework (3) entry for the wrong server domain?

SATA Host adapter issue

Hey guys, I Believe that I have found an issue with the SATA host adapter in a Pavilion p6210y desktop. I have having trouble restoring the system after a hard drive replacement and I discovered that if I have BOTH the hard drive and the CD-ROM drive unplugged then the machine will boot. If I plug in either the hard drive OR the CD-ROM then the machine will hang on the HP BIOS screen. Voltage output of the PSU is normal. I'm thinking the host adapter (motherboard) is toast.

If you already haven't tried, reset the BIOS to 'Default Values'.Or if that doesn't work, try clearing the BIOS entirely by using the Clear CMOS jumpers on the motherboard or removing all power and the CMOS battery for several minutes. Also, you don't need a CD/DVD drive to run a system diagnostics.If you don't have the most recent version of HP Vision Diagnostics, download the most recent version onto a CD or flash drive using the steps in the Creating HP Vision Diagnostic Media section.* HP Vision Diagnostics is supported by systems manufactured between Sept 2010 > June 2012. You can also try BIOS diagnostics.If the computer does not boot, and you do not have a Vision Diagnostics CD available, use the BIOS diagnostic tests. The HP Vision Diagnostics tests are built into the BIOS of your computer and are a quick and easy way to identify basic computer hardware problems. HP 3 in 1 Diagnostics USB KeyThe HP PC Hardware Diagnostics 3-in-1 USB Key includes the latest UEFI based diagnostics as well as the older HP Vision Diagnostics. In addition to diagnostics, it now supports the recovery of a corrupted BIOS on supported systems. Download (3-in-1 USB Key v.3.1.0.0) If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

Unable to connect siebel gateway name server during configuration enterprise server

Hi,
when I try to configure Siebel enterpise after entering the port of the gateway server name I get the following error: "Unable to connect gateway server name".
I perform the following steps:
1) Configuration Gateway Server Name
     Entered port TCP/IP = 2320
     Enable automaticaly start server gateway name server
     Show pop up "Configuration siebel succesful"
2) Configuration Enterprise Server
     Entered name account authentication gateway server name = SADMIN
     Entered passoword account authentication gateway server name = SADMIN
     Entered name host gateway server name = VDIMTNSIEBEL01 (name my machine)
     Entered port TCP/IP gateway server name = 2320
     show pop up error : "Unable to connect gatawey server name"
I can not find the log file in order to understand the issue.
When I try to connect to the gateway from the browser with the url
vdimtnsiebel01:2320 I get this screen mode:
???@??????? ?????????? ????????QÈ ??? ??????????? ??? ??? ? ?h????
and writes this log in the file "C:\siebel\8.1.1.0.0\ses\gtwysrvr\log\NameSrvr.log
SisnapiLayerLog Error 1 0000001151c810a0:0 2013-06-25 10:11:27   4980: [SISNAPI]: Rx msg len=0 peer=VDIMTNSIEBEL01.ISCVDI.LOCAL avail=325 Hello expected session=13
474554202F66617669636F6E2E69636F
20485454502F312E310D0A486F73743A
207664696D746E73696562656C30313A
323332300D0A557365722D4167656E74
3A204D6F7A696C6C612F352E30202857
696E646F7773204E5420362E313B2057
4F5736343B2072763A32312E30292047
65636B6F2F3230313030313031204669

Hi,
Please clarify me the following.
You specified the login name as 'SADMIN'. Is this the login id, that you used for your Operating System? "Entered name account authentication gateway server name" expects you to enter the NT login, not the DB login.
You may also expected to specify your network name, if your login id is specific to a network. e.g Oracle\Rajkumar assuming that Oracle is your network and Rajkumar is the user name.
You may not expected to have the DSN created, as Gateway may not be interested in knowing which DB you are connected to. And you neither enter the 'DB name' anywhere in the 'Gateway Server Configuration', if my understanding is right.
Please confirm.
Below pages are for reference (not directly relevant to your question):
http://docs.oracle.com/cd/B40099_02/books/SiebInstWIN/SiebInstCOM_Prep18.html
Bookshelf v8.0: Requirements for Siebel Gateway Name Server Installation and Configuration
Thanks.
Regards,
Rajkumar Raju

Introscope Host Adapter - All configured Enterprise Managers are offline Error

Similar Messages

Maybe you are looking for