Intune (standalone) - 8.1 laptop as mobile device - password compliance issue

Have Intune trial setup, couple of users created, cleanly reimaged (clean install from media, not a company image) 8.1 x64 laptop with all current Windows Updates. Joins workplace and enables management ok, installed Company Portal from store, then tells
me the device is not in compliance, the password is too short. I only have one local account enabled, it has an 8 character, 4 character set complex password. My Intune account password is a 10 character, 3 character set complex password. My compliance
policy is set to a minimum of 4 characters, 1 character set. Why the heck is it giving me this error, and what password is it referring to?
I had this on initial setup with the laptop, which had previously been on the internal domain, so wiped it and reinstalled the OS fresh, to rule out any lingering domain settings. Retired/deleted the device from Intune, waited an hour, added the newly
installed device. Joined the workplace (PC Settings - Network - Workplace), turned on device management. Installed Company Portal, said all was ok. Rebooted, was asked to reset local password, did so. Opened Company portal, gives
compliance/password error.
My goal is basic management of BYOD 8.1 tablets/laptops as mobile devices, and deployment of Activesync email settings to them (for use with the builtin Mail app). Any and all help appreciated.
Nigel Benfell B.Sc. MCSA

Hi,
It would be the local password on the WIndows 8.1 computer that it is not seeing as compliant. after you changed it does it make any difference after you initiate a Complaince Check from the COmpany Portal?
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Similar Messages

WebtoGo for laptop and mobile device - urgent

Hi,
I need to develop a web to Go application for both laptop and mobile device. The code which i generate for laptop should work on mobile device too.
ie the single application should work for both mobile and laptop devices.
Now coming to lightweight framework and small footprints what technologies should i use in J2EE.
If i use struts is that going to be mess in mobile device. Some one guide me here about choosing the technologies.
Thanks

our java app that we have just ported from PDA to laptop uses AWT components as these work on the PDA. need to go for what will work on the windows mobile device, abnd this may restrict you to older and less functional components.
NOTE platform is defined within the application on the server side (the name of the database on the client), and therefore you will need two applications in terms of oracle lite publications, so define the database name external to the code in some kind of a properties/config file

Some websites loading on my laptop as mobile device sites...tried reinstalling FF but it didn't help...what's going on?

-Firefox version 33.0.2
-Windows 7 Home premium operating system
-Some (not all) websites recently started to load on my laptop as mobile device URLs. It doesn't matter if I follow a bookmark or I type in the URL. But ONLY on this one laptop (HP Pavillion I bought new in 2013) I tried the same sites on my ASUS netbook and they loaded normal). One example is the Washington Post news website. It doesn't make a difference if I allow or block cookies.
-Unistalled & reinstalled Firefox (made sure the profile folder was deleted and replaced). It didn't help.
-Antivirus didn't pick anything up.
-Is this a browser problem or something else? I'd appreciate any advice. Thanks!

After trying that for a while, if you decide you really need 150% at the Windows level, then you can adjust a Firefox setting to use 125% in Firefox. However, the explanation is a bit long, so I'll save it in case you need it.

5.7.1 Command rejected - EPrint / Works from laptops not mobile devices

I have a new HP6500A Plus Printer and have trouble using EPrint with 3 mobile devices (Blackberry, Samsung & iTouch). I get an error stating "5.3.0 Other mail system problem - '5.7.1 Command rejected'. The process works fine when I send an email to print from my 2 laptops. The ePrint Center records the emails that come in from my laptops but do not list the emails sent via my 3 mobile devices. I followed all the typical/basic things - printer on, network on, correct address, no restrictions on who can sent printer emails, etc. Any suggestions on how to get the mobile devices to work?

One of these links should help:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
For more information on HP mobile printing solutions in general, look here:
http://www.hp.com/global/us/en/consumer/digital_photography/free/software/mobile-printing-solutions....
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Corportae laptop and mobile device access

Hello All,
I have ISE, WLC and Cisco APs.
I have a wlan which provides access to corporate laptops(EAP-TLS).Now a requirement is there is to provide access to corporate mobile devices(windows, androids, Apple).
Question:
What kind of sloution i can implement so that if Corporate mobile device connects to wlan then ISE pass them in direction to INternet and all other external mobile must not get access.
Thanks

Hello ,
You can refer this design for white-listing /on-boarding corporate devices, you can ignore the Security Tags , from the authorization rules, just use access-accept/ deny access
http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/Borderless_Networks/Unified_Access/BYOD_Design_Guide/BYOD_Limited_Use_Case.pdf

Apple mobile device (iPod Touch) issues

Header 1
Header 2
Im having issues with this part of my iPod i keep trying to connect it to my pc but its not working && I've tried alot but nothing. I even tried to start the apple mobile device from the services folder on my pc I cant seem to shake it please someone help

Did you already remove all Apple related software and reinstall iTunes after that? Removing iTunes, QuickTime, and other software components for Windows Vista and 7

ISE Profiling for Wireless Devices (WLC 5508) like Laptops and Mobile Devices

Hi,
We have integrated WLC 5508 to cisco ise 3315 with ios 1.1.1 and using Guest Sponsor portal for wireless guest users.
Where we have created open ssid in wlc and redirect web login portal in wlc for guest users. We have enable all respective node in policy service for profiling and also configure snmp in wlc as well as in ise.
When guest user is connected to open ssid its get redirected to web login page of ise portal and when it gets login we are only able to see the username which guest user login but not the end device in monitoring log.
Wireless End devices are not able to get profiled can any one tell me what configuration I need to do on ise or wlc side to profiled end guest wireless device like android,iphone and laptops
Thanks
Pranav

Hi Tarikh,
I only want to identify the end devices for wilress guest user. I have configured MAB Authentication and configure autorization policy where in mention identity group any condition as wlc web authentication and athorization profile only guest mentioning plain access for the same.
Can you help me how I can achived profiling for wirless guest devices. I have configured all profiling probes . Enable snmp on wlc as well as in network devices.
What else I need to configured to achived just identiting device nothing but profiling and which should reflect in authnetication logs.
Thanks
Pranav

Music stable with mac, but not mobile devices?

I recently got a new sound dock and got a brand new airport express with it so I can control the dock from anywhere in the house.
After setting up the airport using our Macbook Pro, I started streaming music perfectly fine from iTunes on the mac. To kind of show off the new toy to my wife, I started streaming music using my iphone 5. The music was cutting in and out like crazy. I changed to her iphone 4S and it continued to cut out like crazy. I even pulled out my oldschool ipod touch, and it continued to cut out.
So I am trying to figure out why there doesn't seem to be any issues whatsoever using the airport express from my mac, but all of my mobile devices have intermittent issues?
All devices have the most updated software that I can find.
The only thing I can think of is the connection to the network is weaker on the mobile devices than it might be on the macbook? They are all using Wi-Fi to my home network. So going by that, the aiport/dock/macbook all seem to have it figured out perfectly so something is working.
Am I missing some setting that is causing network lag on the mobile devices but not the mac?

The single biggest mistake in your analysis is assuming that if Windows (or a Wii or an iPhone or whatever other device) can connect, your router is not to blame.
Though devices are designed to standards, there can be errors in implementing those standards or even simple software bugs that come into play.
The example I've used over and over again is say there is a bug where when the router is asked to add "2 + 3" it answers "5" but when asked to add "3 + 2" it answers "6."
If Windows only ever adds "2 + 3" but Mac OS X adds "3 + 2," it's not Apple's fault the router is incorrectly responding "6" in the later case.
But let's start with easier questions:
1) Are you sure that no proxy is being used if one shouldn't be, and vice-versa?
2) Are the DNS addresses shown in your TCP/IP settings the same regardless of whether you are connected via AirPort or Ethernet?
3) Could there be some interference in the area you are using your Mac? Recall also that Mac and Windows PCs use different antenna designs, so what interferes with one may not affect the other.

Mobile device PIN

After migrating to Exchange 2013 I don't see the "Show Recovery Password" feature anymore. Is it really gone or am I just not seeing it; if it is gone how would I go about changing a users PIN if they forget theirs?

please see below, what identity?
I would like this for everyone not just individuals.
Also, this was enabled in 2010 so its possible since I'm still using the same policy its working I just can't see it anywhere, where would a user see it?
I personally have a Windows phone and I don't see mine anywhere, when I run the FL output I get this, see below.
Use to be able to see it in 2010 webmail. Even those devices that didn't support it at least showed it in 2010 webmail it was just greyed or disabled while supported devices showed it.
I have a supported device, where do I see it?
Alternatively - when a users calls me and asks me to change their Mobile device password how would I do that?
Thanks for your help.

Remote reset PIN on Mobile Devices - SCCM 2012 R2 w/ Intune

Hi Forum
I am wondering if this is possible. Can I reset a PIN on a phone (WP, Android, iOS, etc), mainly concerned with WP8 and WP8.1.
I know this is possible through Intune standalone. However, Windows Intune is connected to SCCM 2012 R2 as the authority. Can i reset the PIN remotely on these phones? Does this have anything to do with the Intune Extensions, if so which one?
Thanks in advance
NN

Quick thanks first for all the replies.
WP does not support this feature neither with Intune Standalone nor with ConfigMgr.
Only iOS & Android support.
http://scug.be/blogs/nico Twitter: @nsienaert
Is this right, I thought an update got released for this in Intune Standalone?
http://blogs.technet.com/b/windowsintune/archive/2014/04/28/availability-of-update-to-windows-intune-for-windows-phone-8-1-and-samsung-knox-standard.aspx?loc=zYFCz&prod=zWIz&tech=zOttechz&prog=zOTprogz&type=zBLz&media=zOTmediaz&country=zUSz
First paragraph states:
"...and the ability to remotely lock or reset a device’s PIN."
Although looking in my console at laptops, EAS managed devices and Intune Managed devices the option does seem to be greyed out???
The process seems to be the same as I thought for ConfigMgr, so thanks for clarifying.
Thanks
NN

'itunes requires a new version of apple mobile device support please uninstall both apple mobile device support nd intunes then install itunes again'

im trying to sync music from itunes to my iphone from the computer and everytime i go to plug it in a box comes up and says 'itunes requires a new version of apple mobile device support. please unistall both apple mobile device support and intunes. then install itunes again' i have tried installing itunes many times but this keeps popping up. i dont know what i need to do or what im doing wrong??

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

HT1923 I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system servic

I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." The diaglogue box gives me the options to abort, retry, or ignore; when I tried retry and ignore the re-install process stays stalled & the dialogue box comes back & I don't want to abort & start this all over to probably end up with the same issue; what does this mean & what do I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100

Hi!
We have fatal or critical error message on Microsoft Intune Portal but all agents are working just fine. Before opening support ticket we would like to hear comments from the experts on this forum. We would also like to fix this error before starting to
manage mobile devices with Intune.
Error message on Intune Portal:
"Microsoft Intune was unable to set the desired mobile device policy for one or more users due to the following error: A2CE0100"
Repeated: 19 times.
Class: (System) Policy
Random Fatal error message on C:\Program Files\Microsoft\OnlineManagement\Logs\PolicyAgent.log found from one Windows 8.1 client:
2015-02-21 08:49:20:704 2852 1ab0 FATAL: DocumentProvider::IndicateToConsumer/pp->ProcessPolicies(NULL, NULL, NULL, NULL) failed with error 0x800704d5.
That said, we are not facing any specific problem but we would like to find symptom of this repeating error message on Intune Portal . We would appreciate to get any thoughts about this case.
Br.
Jukka

Hi Jukka,
Mobile policy doesn't apply to clients using the Full Client download. Please open a support case so the team can assist in further troubleshooting.
Thanks,
Jon L. - MSFT - This posting is provided "AS IS" with no warranties and confers no rights.

Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What does this mean? I have had this phone for over a year..

Just downloaded iTunes to new dell laptop, tried syncing my iPhone get an error message: "this iPhone cannot be used because the Apple Mobile Device service is not started". What is the issue, had this phone over a year??

I had this problem before. I like to disable extra services to speed up my computer and I disabled the Apple Mobile Device service and had to re-enable this.
You can do that by going Control Panel>Administrative Tools>Services. Once you have gone to the services window, look for Apple Mobile Device and right-click. Select "Properties". There should be some information about the service as well as the label "Startup Type" with a drop-down menu beside it. If it says "disabled", that is your problem; Change the selection to anything except disabled (Automatic is easier and ensures that you can sync as soon as itunes opens).
If this doesn't work, I would look into your anti-virus' settings. Good Luck!

Windows 8.1 mobile device management using integrated environment of SCCM 2012 R2 and Windows intune

Can we avoid the dependency on the Symantec certificate for enabling windows phone enrollment under Administration->Cloud services -> Windows InTune subscriptions - Windows Phones. My environment will have only windows 8.1 phones.
Regards
Leela

See http://status.manage.microsoft.com/StatusPage/ServiceDashboard.
Engineers are investigating a service issue impacting access to portal via mobile devices.
(Started on 12/30/2014 8:00:00 AM UTC)
1/8/2015 11:42:49 PM (UTC)
Current Status: Engineers are continuing to troubleshoot potential issues related to Active Directory Federation Services (ADFS). Engineers have gathered additional traces and logging data for deeper analysis. User Experience: Affected users with Windows Phone,
iOS, or Android devices are unable to access their company portal and receive repeated prompts to enter credentials. If incorrect credentials are entered, users will receive an error stating that they have entered a bad password. Customer Impact: Engineers
have received reports that some customers are experiencing this issue. A subset of users are affected by this event. Other users remain unaffected. Incident Start Time: Tuesday, December 30, 2014, at 8:00 AM UTC Next Update by: Tuesday, January 13, 2015, at
12:00 AM UTC
Torsten Meringer | http://www.mssccmfaq.de

Intune (standalone) - 8.1 laptop as mobile device - password compliance issue

Similar Messages

Maybe you are looking for