Intuos4 tablet won't work when iMac wakes from sleep

Whenever my iMac wakes from sleep my Intuos4 tablet no longer functions (I use it in place of my Magic Mouse). Has anyone had this issue?

Viking501,
You may want to mark this thread with a correct answer which you will find in the Legend to the right. This may help other people with a similar issue.

Similar Messages

  • Folder always opens when imac wakes from sleep

    Don't think its a huge problem but when new imac wakes from sleep the same folder always pops up on screen(shaded in black). It always has to be closed before I can proceed with anything.Any suggestions would be appreciated. Also the folders name is always highlighted red. Thanks

    Searching the web for "appcode.hex" the first item that I found was for something related to an Olevia TV.
    A .exe file is a Windows file and will not run under Mac OS X.
    Installer Vise "Creates software installers for Windows or Macintosh.(MindVision Software)"

  • Networking issues following upgrade to 10.5.8 when iMac wakes from sleep

    Hello,
    I recently upgraded to 10.5.8 and I'm now experiencing issues with network connectivity following the iMac waking from sleep. I have to stop Airport and then start it again to resolve the issue.
    Can you provide any resolutions to this or advice?
    Many Thanks,
    Sam

    Reinstall the Mac OS X 10.5.8 Combo Update because the Combo seems to help a lot of people when a Delta upgrade doesn't take right.

  • External hard drive won't power back up when iMac wakes from sleep

    I have the external hard drive connected via USB. I always put my iMac to sleep before going to bed and I wake it up when I come home from work. Except that when I do, the external hard drive doesn't power up. It still shows in Finder, but clicking on it's folders just opens them up as if they were empty. There's no access noise and the drive can't be ejected.I have to switch it's power off and turn it back on for it to spin back up.
    At first I thought it was because I had Energy Saver set to power down the drives whenever possible, which works just fine when it's on, the drive powers on and off as needed just as long as the iMac doesn't go to sleep. I turned it off just to make sure and it made no difference. As soon as the iMac goes to sleep and the drives powers down, it will not come back on without a power cycle once the iMac wakes.
    I've used this drive in an old Macbook for years without having this problem. The only difference is that the Macbook was on 10.6.8. I was thinking about buying a 4 bay USB enclosure and filling it up with hard drives, but I'm not about to do that if every time I put the iMac to sleep, the whole thing will not power back on without a power cycle.
    Any help would be much appreciated.

    Not sure if you managed to get this issue resolved yet Marcus, but I too have a similar problem:
    Currently I'm upgrading from Leopard to Lion (via Snow Leopard) on both an iMac and MacBook Pro (both Intel), but before I proceed with the OSX upgrade I wanted to back everything up. Thus far I have partitioned an external firewire drive (G Drive - one that is bootable), and cloned each machine using Carbon Copy Cloner to it's own partition (both GUID). There is plenty of space left over on each partition.
    The issue - I can boot the OS X from the external drive on the MacBook Pro but not on the iMac.
    When I restart and hold down Option on the iMac the only drive that appears is the HDD, not the other two selectable drives that are visible if I boot up on the MacBook Pro. On the iMac in System Prefs > Startup Disc I can see all 3 drives but when I select it and restart, the machine freezes on the grey loading screen and goes no further.
    Not that it should make a difference, but there is a 3rd partition on the external drive that is currently empty (for extra storage).
    Any help is greatly appreciated - I can't find any relevant answers elsewhere. Thanks,
    Dan

  • CS5 frozen when iMac wakes from sleep mode

    This problem just started, and I don't know if it's an INDD problem or a Finder problem. When I wake my computer from sleep and try to access INDD I can't. I click on the application icon in the Dock and it won't come to the front. All my other applications will. I have to force quit INDDD every time, and re-open it. This is whether I have a document open or not. I tried zapping the PRAM and shutting down, unplugging everything and starting back up but neither of those helped. Any advice or ideas of what could be wrong?

    Best to post the actual URL. I assume this is: http://pastebin.com/raw.php?i=d6TgEEMv.
    Anyhow,  both diagnostics are pretty revealing. From the crash report:
    Thread 0 Crashed:  Main Thread  Dispatch queue: com.apple.main-thread
    0   libSystem.B.dylib                  0x96475aa2 __semwait_signal + 10
    1   libSystem.B.dylib                  0x9647575e _pthread_cond_wait + 1191
    2   libSystem.B.dylib                  0x964773f8 pthread_cond_wait$UNIX2003 + 73
    3   ...extensis.cpp-core-framework     0x2552e640 GCondition::Wait() + 48
    4   ...extensis.cpp-core-framework     0x255d1e6a GThread::StopThread(bool) + 214
    5   ...extensis.cpp-core-framework     0x255d36d1 GThread::~GThread() + 45
    6   ...extensis.cpp-core-framework     0x25555d4e GIPCClient::~GIPCClient() + 1214
    7   ....ExtensisFontManagement.sdk     0x25a99854 GAgentIF_IPC_Impl::~GAgentIF_IPC_Impl() + 34
    8   ....ExtensisFontManagement.sdk     0x25a98b5b GAgentIF::~GAgentIF() + 113
    9   ....ExtensisFontManagement.sdk     0x25823b42 boost::detail::sp_counted_impl_p<GAgentIF>::dispose() + 24
    10  ...extensis.cpp-core-framework     0x2552ad9f boost::detail::sp_counted_base::release() + 37
    11  ....ExtensisFontManagement.sdk     0x25823cd5 void boost::shared_ptr<GAgentIF>::reset<GAgentIF>(GAgentIF*) + 79
    12  ....ExtensisFontManagement.sdk     0x2581dacb GMystiqueSdk::CreateAgentIF(boost::shared_ptr<GAgentIF>&, unsigned long) + 95
    13  ....ExtensisFontManagement.sdk     0x257b03d3 GMystiqueConfig::GetRunningAgentProductMode(GMystiqueConfig::EProductMode&) + 121
    14  ....ExtensisFontManagement.sdk     0x257b72ca GMystiqueConfig::GetIsAgentRunningByProductMode(GMystiqueConfig::EProductMode, bool&) + 746
    15  ....ExtensisFontManagement.sdk     0x257b8635 GMystiqueConfig::GetIsCoreAgentProcessRunning(bool&) + 33
    16  ...Management.plugin-interface     0x25388601 GetIsCoreAgentProcessRunning + 28
    17  ...is.AutoActivationPlugin.ID7     0x24beac0c CoreAgentInterface::ProcessNotifications() + 232
    18  ...is.AutoActivationPlugin.ID7     0x24bdab16 SuitcaseIdleTask::RunTask(unsigned long, IdleTimer*) + 710
    19  ...adobe.InDesign.AppFramework     0x1a75ff85 GetPlugIn + 242005
    20  ...adobe.InDesign.AppFramework     0x1a760eac GetPlugIn + 245884
    21  ...adobe.InDesign.AppFramework     0x1a702e78 0x1a700000 + 11896
    22  ...adobe.InDesign.AppFramework     0x1a7285fa GetPlugIn + 14282
    23  com.adobe.InDesign                 0x000028ab main + 187
    24  com.adobe.InDesign                 0x000027c6 start + 54
    It's Extensis Suitcase Fusion's auto-activiation plugin!
    So, disable it to confirm. Then make sure you're running the latest version, and if so, take it up with Extensis. I believe they have free support on their web site.
    Also, you should upgrade InDesign to 7.0.4, you're running 7.0.3, and there were a lot of fixes.

  • Javascript (in Firefox 3) takes several minutes to start working when computer wakes from sleep, Mac OSX 10.5.8

    Whenever I wake my Mac from sleep, with Firefox having been left running, some parts of Firefox take several minutes to start working again. These include switching between open tabs and any website functionality that uses javascript, eg gmail. This has gone on through many updates of Firefox. If I quit Firefox immediately on waking the Mac and restart it, everything is OK.

    The following worked for me:
    http://support.mozilla.com/en-US/questions/684867
    "Problem: I had the same problem but with mac osx 10.5.8, Firefox 3.6.6 sometimes prints and sometimes does not, but the preview was always blank and I could not save to pdf file.
    Solution: I downloaded Firefox 3.5.10, installed it on my desktop and opened it, tried print preview and it worked, quit Firefox 3.5.10 and ran 3.6.6 and voila! print preview is working fine and I can save to pdf fine.
    I guess running 3.5.10 fixes the profile in a certain way. I have no idea how that happened but it worked."

  • Wifi Drop-out when iMac wakes from sleep

    My iMac does not connect when waking from sleep. I have to turn the airport off and on every time. Its been doing it since last October when i installed Lion. I had hoped it would be fixed with an update but no such luck. I have seen similar posts but no suggestions to fix it. Anyone have any ideas?

    Searching the web for "appcode.hex" the first item that I found was for something related to an Olevia TV.
    A .exe file is a Windows file and will not run under Mac OS X.
    Installer Vise "Creates software installers for Windows or Macintosh.(MindVision Software)"

  • Airport Stops working when system wakes from sleep.

    Hi everyone. I have 2 macs in the house a mac mini and a intel based imac. Both have worked fine for sometime however they both are exhibiting the same issue. I think its an OS bug. But when both systems go to sleep and then are woken up at a later time to use, you are un able to get onto the internet. The airport seems to be down. However the airport menu in the task bar at the top of the screen shows that you are actively connected but you are unable to utilize any network resources internal or external. The only way ive found to counter act this is by turning the airport off then back on and voila everything works. I have done the following:
    * repaired Disk Permissions
    * removed the wifi profiles under the preferred networks
    * Clean install of the system folder
    Im currently running the latest OS on both machines. I make sure I stay current on apple updates. This issue only happens on the airport. If i use the ethernet port i have no issues. Im thinking this is still an OS issue.. Is anyone else having the same issue?

    Can you please describe what you do to "Clean Install of the system folder"? I need to fix the same problem that occurred only after upgrading to 10.6.3. I'd really appreciate the clarification.

  • After upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down then restore power to get it to function.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

  • HT1338 why do i lose wi-fi internet connection on iMac when computer wakes from sleep

    Everytime my imac wakes from sleep I lose internet connection and have to go into network and reconnect.  I am using OS X Mountain Lion software.  Please help!

    You might try looking at these Apple support articles:
    http://support.apple.com/kb/PH11099
    http://support.apple.com/kb/PH10662 - very simple suggestions only
    Here is another thread with a suggestion:
    https://discussions.apple.com/message/18848093#18848093
    You also might want to consider filing a feedback report. A lot of people are having similiar problems:
    http://www.apple.com/feedback/
    If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.

  • I lose internet connection on iMac when it wakes from sleep

    Everytime my imac wakes from sleep I lose Wi-Fi connection.  I am using OS X Mountain Lion.  Please help

    You might try looking at these Apple support articles:
    http://support.apple.com/kb/PH11099
    http://support.apple.com/kb/PH10662 - very simple suggestions only
    Here is another thread with a suggestion:
    https://discussions.apple.com/message/18848093#18848093
    You also might want to consider filing a feedback report. A lot of people are having similiar problems:
    http://www.apple.com/feedback/
    If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.

  • IMac wakes from sleep on its own with Yosemite

    After installing Yosemite, my iMac wakes from sleep all on its own multiple times throughout the day and night.  The screen does not turn on when this occurs and it goes back to sleep on its own.  I figured the my energy settings may have changed after the upgrade, but nothing is different.  I have no schedule set and the "wake for network access" is unchecked.

    To my knowledge, any Mac that is 1. connected to power and 2. not powered down will wake periodically for the reasons I explained, and perhaps for additional reasons known only to Apple. If disabling "wake for network access" does not change anything, all I can say is that it's working as Apple intends it to work. Before you ask, I strongly discourage you from finding clever system "hacks" or workarounds to prevent your Mac from working as designed.
    It may or may not be a bug. Whether it is or not though, if it bothers you, consider providing feedback to Apple.
    When questions such as yours arise, it helps to look at iOS. iPads and iPhones will all periodically connect themselves for the purposes of downloading emails, Messages, alerts etc. There is no way to disable that, other than to completely power down the device, which almost no one does. Apple has been inexorably changing OS X to effectively implement iOS design features such as this – for better or worse is not for us to say.
    May I ask why this concerns you? Perhaps that would lend some insight regarding possible solutions.

  • External hard drives ejecting after iMac wakes from sleep.

    External hard drive keeps ejecting after iMac wakes from sleep. TM does not recognise, so have to unplug then re plug in Ext HD, only then TM will perform a back up. Not seamless backups. Help to resolve would be grand

    Ive got the same problem with a Western Digital 500GB My Book Pro on my iMac Ive tried it on a few other machines and I think its happened on them, I say think because it was only when it had happened a couple of time that I started to take notice of circumstances etc and ive only had the drive a week, downloaded what may be a more uptodate "My Button manager" from the WD site still happened but Ive got this idea that it didnt happen on one machine which may not have had the MyButton thing on at that time, have you solved it yet I am using USB at the moment.
    20" iMac 2.13Ghz   Mac OS X (10.4.8)  

  • New iMac wakes from sleep sluggishly and requires password despite preference setting

    My new iMac (Core i7) wakes from sleep very sluggishly and it requires a password despite the fact that I have de-selected this option in Preferences.
    I have a new iMac.  I used Migration Assistant to move everything from my older Mac Pro, which was running Lion.  Under the Secucrity settings in Preferences, I de-selected "Require Password."
    I use a bluetooth mouse and wireless keyboard.  Typically I click the mouse to wake up my Mac.  The screen comes to life and the cursor moves with the mouse, but...how can I explain this?  When I move the mouse in this situation, the cursor paints a gray swath over the desktop screen.  It looks like I am using a paint program.
    After clicking the mouse repeatedly the computer becomes responsive and the password entry screen appears--most of the time.  I have tried to set it up so a password is not required, but usually I get this screen.  SOMETIMES, it behaves correctly--say one-fourth of the time.
    Another problem...  When I shut the iMac off and then back on, it does not always link to my Apple bluetooth mouse.  I have to connect a USB mouse and re-link the wireless mouse.
    I wonder if this is a software/OS issue.  My old Mac Pro had similar wake-up issues, and I wonder if Migration Assistant transferred them to my new machine.
    Your thoughts and great ideas are appreciated.
    John Graham
    Fort Collins, CO

    I too am having trouble with my bluetooth mouse after upgrading to 10.7.2 and the associated iOS 5 upgrades.  The mouse keeps losing its connection.  I've turned bluetooth off, trashed the preferences, rebooted and repaired both the keyboard and mouse but the mouse keeping dropping out.  Keyboard seems ok.  Anyone have any ideas? 
    Len

  • Display Changes Resolution When Computer Wakes From Sleep

    I have a MacBook Pro bought in May of 2006. In the last year, this problem has been getting progressively more annoying to me. When the computer wakes from sleep (not every time, but most of the time) the screen will flash blue, then reset the resolution to 640 x 480, I think. To fix it, all I have to do is go to System Preferences and change the resolution, but when I do that, it pops up two windows, like it thinks I have a dual display set up. To fix this, I always click 'detect displays,' and it fixes it, but the next time I wake the computer from sleep, it does it again. This isn't really an urgent problem, but I would expect my computer to behave a bit better for me.
    Thank you in advance for any aid you might give me.
    Lisel

    Hi Lisel. I have a similar age MacBookPro that does the same thing. I don't really know how to fix it I'm sorry, I wish I did cause it's annoying. I just thought I'd let you know you're not the only one with this issue.
    Basically, for some reason it thinks it has two displays connected, even when there isn't. To stop it being a total pain, make sure when it does come up with the two Display Pref windows to set them both to 1440x900, at least then when it does go dual display it won't be 640x480 and you can still read stuff.
    I've also left the Display Pref icon on the top tool bar (next to the AirPort and Bluetooth and stuff), so I can just click that and Detect Displays. When it does that it figures out for itself it doesn't actually have two displays connected and so goes back to normal.
    I know that's a workaround and not a fix, sorry. I'd be keen to know if anyone else has any better solutions:)
    Thanks,
    Mark.

Maybe you are looking for

  • XPERIA Z -What kind of service/SUPPORT standards do you have? Is there any at all?

    Hi guys. Hello sony mobile people. My name is Isaiah and I'm from Manila, Philippines. I am a solid sony fan boy for morethan 10 years now (mobile phones). Or maybe was a solid sony fan boy. Not until yesterday happened. 12/17/2013.  I heavily suppor

  • F.05 Valuate GR/IR  Account

    Hi Guru, What the exactly meaning in valuating GR/IR account, although i read the help for the following sentence. i still canot understand how it happen in the posting. "A statement and valuation are only completed if the balance per order number an

  • 64-bit version of Photoshop Elements & Premier Elements 13

    Yesterday I purchased Adobe Photoshop Elements and Premier Elements 13 at an Office Depot Store.  I was finally able to download and install the Premier Elements.  The Photoshop Elements 13 will download, but it will not install.  Near the end of the

  • Hard drive space

    i just deleted all my itunes music on my mac about 50gb but my hard drive its showing full.

  • DVD disc burn speed

    Can a DVD-R disc be written faster than it's rated speed? If the disc says it's rated speed is 4X, can you burn it at 8X, etc? If you can, will the disc be readable later? Also, does anyone have any reccomendations as to the most reliable media. I ha