Inutilizar nota com status 252: Ambiente informado difere do de recebimento

Boa tarde!
Colocamos o GRC apontando para o ambiente de produção, porém no ECC ainda estava apontando para homologação.
Como resultado disso, tivemos uma nota gerada que retornou com o seguinte erro: 252 - Rejeição: Ambiente informado diverge do Ambiente de recebimento.
O ECC então foi apontado para produção, porém agora eu não consigo inutilizar a nota, pois continuo recebendo a mensagem
acima. Ou seja, eu tenho um ambiente apontando para a produção, porém no xml da nota, o tipo de ambiente está como homologação.
Alguem já passou por algo parecido? O que foi feito para solucionar esse problema?
Desde já agradeço.

Antes de mais nada tem que primeiro voltar a filial para "Produção". (feito)
Depois basta aceitar rejeição de cancelamento e reenviar a nota que o SAP irá chavear e envia-la como "Produção" para o GRC.
Porém se o GRC esta enviando nota de Homologação para SEFAZ produção, sua configuração esta errada. Favor rever o "Receiver Determination", mas especificamente a condição do campo tpAmb = 1. Exemplo de uma condição para enviar uma nota de produção para SEFAZ MG: (/p1:nfeRecepcaoLote2/p1:cUF = 31 AND /p1:nfeRecepcaoLote2/p1:tpAmb = 1)
Alias. Se bem que pode-se querer uma configuralçao dessa - permitir enviar nota de homologação para produção. Aí é definição de cada um então.
At.,
Bernardo Braga
Edited by: Bernardo Tavares Braga on Apr 7, 2011 10:34 PM

Similar Messages

  • Apple tv gen. 2 status light does not come

    Apple tv generation 2 status light does not come on. Remote works. Did a restore through iTunes.... Still nothing. Please help.

    No it won't turn on at all you can't see it on the tv.... It is like it is dead. I am thinking it is something with the power source, but don't know how to fix it.

  • Inutilização de Nota com erro de validação no GRC

    Bom dia,
    Estou com um problema na inutilização de notas com erro de validação no GRC!
    Quando a nota é rejeitada pela GRC, fica da seguinte maneira:
    Etata obrigatória do processo : 8 (Erro validação interna sistema de mensagem.Envie novamente!)
    status de comunicação do sistema : 0 (Enviada ao sistema de menssagem (XI,...))
    status do sistema de mensagens : V (Mensagem Recebida: Erro de Validação Interna)
    Sem utilizar o botão Reset NFe, clico no botão Request Cancelation e realizo os procedimento de cancelamento.
    Verifico pela tabela /XNFE/NFE_HIST que gerou um registro com a chave de acesso, type 3 (Inutilização) e status 6 (Enviado ao Processamento da Nota Fiscal Eletrônica).
    Consulto no SEFAZ e verifico que essa nota já esta inutilizada porém na J1BNFE a nota continua processando.
    Alguem sabe como resolver este problema?
    Obrigado,
    Leandro Von Zubem.

    Bom dia.
    Tenho uma NF-e que está em situação parecida e agradeço suas colaborações.
    Estamos na ECC 5.0 SP 19.
    Esta NF-e foi rejeitada pela SEFAZ (NF-e writer e o erro estava no ano da data de emissão = 2008)
    e o usuário não percebendo tentou re-enviar várias vezes.
    Por fim, mesmo Rejeitada foi solicitado o Estorno (Skip) e os status da NF-e ficaram como abaixo:
       SAP ECC 5.0 SP19
          Status Ação :          Em processamento
          Status do documento NF-e:     2 Rejeitado
          Status de comunicação do sistema: 3 Rejeitado/a & autorização solicitada para ignorar
          Status do sistema de mensagens:     C Mensagem recebida: pedido de inutilização
          NF-e Código de Status :     228
       Log
              Novo stat.comun.sistema "Rejeitar estorno/ignorar usuário aceitos" não permitido p/status
                         comun.sist.anterior "Rejeitado/a & autorização solicitada para ignorar
              Nº mensagem J1B_NFE007
       GRC
          Status Code:               228     Rejeição: Data de Emissão muito atrasada
    Seguindo as orientações já mencionadas aplicamos em Desenv as Notas 1376901, 1376324 e 1298283 e
    simulamos a situação. Mas a NF-e também permanece "em processamento".
    A Nota 1141636 não foi possível aplicar porque exige para Basis o SP 700 e estamos no SP 640.
    Esta atualização seria muito mais demorada.
    Pergunto: existe alguma forma de ajustarmos os status para finalizar esta NF-e? (Rejeitar ou Aprovar/Rejeitar).
    Agradeço a toda colaboração.
    Abraços a todos e ótimas festas.
    Luis Appel

  • NFe Fiscal Workplace - Não atualiza com Status Sefaz

    Boa noite!
    Estou tentando reexecutar a consulta de status de NFe através do fiscal workplace para algumas NFes que ficaram com Status Global 11 devido a um problema temporário que tivemos com SSL (certificado estava sendo rejeitado pela SEFAZ) . Para tal, quando seleciono uma NFe clico em "Outras Funções > Consultar Eventos" o cenário de processo de integração "NFESC_WebAS_Outbound_NFeStatusCheck"  é executado com sucesso e posso ver a interface NFESC_nfeConsultaNFResponse_IB retornando ao SAP GRC com sucesso, porém no monitor fiscal workplace a nota continua com Status Global = 11.
    Um detalhe importante é que isso só está ocorrendo para estas notas que estamos tentando consultar o status através do monitor "Outras Funções > Consultar Eventos", pois após a SEFAZ passar a aceitar nosso certificado, para o processo automático (resumindo entrada de nota e depois conferência de status)  está tudo correndo bem. Parece ser algo relacionado com a execução de consulta de status via monitor!
    Por favor, se alguém puder dar um auxílio será de grande ajuda!
    Desde já agradeço.,

    Bom dia Glauco,
    Não estou lembrado do caso exato, mas sim você tem razão que diferente do SAP NFE 1.0, no SAP NFE 10.0 tem vários "chamadores" da consulta de status na Sefaz, e de acordo com o processo que solicitou esta consulta tem ações diferentes a analisar.
    Em que versão você está? Já usando 3.10?
    Atenciosamente, Fernando Da Rós

  • NF-e com Status Proc. 06, erro 50 e status 212 no GRC e no R/3 processando

    Bom dia!
    Gostaria de pedir seu auxílio com o seguinte problema:
    Duas notas foram geradas na madrugada de hoje (25/02) e receberam rejeição 212 da SEFAZ.
    Na sequencia, o usuário tentou inutilizá-las pelo monitor J1BNFE, e ambas ficaram com o seguinte erro no GRC: Status de Erro 50 (Cancelamento/inutilização: erro de sistema PI) e status 212 (Rejeição: Data de emissão NF-e posterior a data de recebimento). Ao verificar os batchs, ambos estão com status de lote 05 (Resultado recebido) e código de status 104 (Lote processado). Entretanto, no R/3, as notas estão em processamento, e não atualizam.
    Ao tentar executar o programa XNFEUPDATE_ERP_STATUS_DIAL, é exibido o erro "NFe XXX with document status C is not permitted to be resend to ERP".
    Alguma ideia do que posso fazer para ter o processamento finalizado no R/3 ou qual é o motivo da rejeição?
    Muito obrigada,
    Daniella

    ... complementando...
    2) Algumas considerações à título de exclarecimento:
    > Duas notas foram geradas na madrugada de hoje (25/02) e receberam rejeição 212 da SEFAZ.
    Fizeram uma NF-e com data posterior e a Sefaz recusou, talvez fosse até questão de 1 dia (vc disse madrugada) então esperar virar meia noite fazer um RESET e Enviar resolveria. Verifique as datas/horas que estão sendo geradas as notas talvez isso seja a causa raiz do seu problema. (Ex.: NF-e gerada no relógio às 23:10, o sistema entende que a nota foi criada no dia seguinte 00:10).
    > Na sequencia, o usuário tentou inutilizá-las pelo monitor J1BNFE, e ambas ficaram com o seguinte erro no GRC: Status de Erro 50 (Cancelamento/inutilização: erro de sistema PI)
    Esta é uma das opções do usuário e foi correta, o problema foi no processamento no GRC/Sefaz. Deve-se investigar: veja 1)
    status 212 (Rejeição: Data de emissão NF-e posterior a data de recebimento).
    Esta foi a última resposta recebida da Sefaz, porém não é relativa ao processo de Inutilização e sim ao de envio.
    Ao verificar os batchs, ambos estão com status de lote 05 (Resultado recebido) e código de status 104 (Lote processado).
    05 - O resultado foi de fato recebido, uma rejeição. Tá normal isso, rejeição é resultado
    104 - Lote processado, mesmo que o anterior.
    Observação: O lote só deve ser verificado nas situações de envio de NF-e, como a NF-e já está "noutra", inutilização, então deve-se focar somente no status da NF-e. Veja 1)
    Entretanto, no R/3, as notas estão em processamento, e não atualizam.
    Após recebeu o resultado do envio (rejeição), o usuario disparou um novo processo (inutilização) que está parado no GRC. Veja 1)
    > Ao tentar executar o programa XNFEUPDATE_ERP_STATUS_DIAL, é exibido o erro "NFe XXX with document status C is not permitted to be resend to ERP".
    Este report serve para retransmitir situações finais (status 05) para o ERP, porém esta NF-e encontra-se travada no processo de inutilização, sem resposta recebida. Veja 1).

  • Error-IM258-Object does not exist (Status Management)

    Dear All
    We have used the enhancement "MCI10001" for triggering the external E mail while scheduling the maintenance plan using T code IP10.
    System will fetch the E mail ID from the equipment master -partner function either Vendor or User responsible and sends the mail
    But while executing IP10 system throws an error message as follows
    Error Msg no: IM 258- Object does not exist (Status Management)
    This refers to an error in central status management.
    Kindly help on the above issue
    Regards
    Thyagarajan

    l have same problem  my code  below
    help me please .
    if email is not INITIAL and ulke is not initial and sy-tcode eq 'QM01' and sy-ucomm eq 'BUCH' and I_VIQMEL-QMART = 'Q1'.
        CALL FUNCTION 'POPUP_TO_CONFIRM'
          EXPORTING
            TITLEBAR       = 'E-mail'
            TEXT_QUESTION  = 'E-mail Göndermek istiyormusunuz ?'
          IMPORTING
            ANSWER         = answer
          EXCEPTIONS
            TEXT_NOT_FOUND = 1
            OTHERS         = 2.
    if answer eq 1 and ulke = 'TR'.
    lt_mailtxt ='Değerli Müşterimiz,'.
    APPEND lt_mailtxt.clear lt_mailtxt.
    lt_mailtxt = 'Şikayetiniz sistemimize alınmıştır. Müşteri şikayeti sorumlularımız sizlerle en yakın zamanda irtibata '.
    APPEND lt_mailtxt.clear lt_mailtxt.
    lt_mailtxt = 'geçeceklerdir. Şikayetiniz için teşekkür eder, saygılarımızı sunarız.'.
    APPEND lt_mailtxt.clear lt_mailtxt.
    lt_mailtxt =''.
    APPEND lt_mailtxt.clear lt_mailtxt.
    data:  it_packing_list like sopcklsti1 occurs 0 with header line,
           it_receivers like somlreci1 occurs 0 with header line,
            gd_cnt type i,
            gd_sent_all(1) type c,
            gd_doc_data like sodocchgi1,
            gd_error type sy-subrc.
    gd_doc_data-doc_size = it_packing_list-body_num * 255.
    Populate the subject/generic message attributes.
      gd_doc_data-obj_langu = sy-langu.
      gd_doc_data-obj_name  = 'SAPRPT'.
      gd_doc_data-obj_descr = 'Naksan KGM'.
      gd_doc_data-sensitivty = 'F'.
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table lt_mailtxt lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
      CLEAR it_receivers.
      it_receivers-receiver =  email.
      it_receivers-rec_type = 'U'.
      it_receivers-com_type = 'INT'.
      it_receivers-notif_del = 'X'.
      it_receivers-notif_ndel = 'X'.
      append it_receivers.
      call function 'SO_DOCUMENT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
                sender_address             = 'sinan.tataroglu@***.com'
                sender_address_type        = 'INT'
                commit_work                = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_txt               = lt_mailtxt[]
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    IF sy-subrc EQ 0.
    COMMIT WORK.
      Push mail out from SAP outbox.
    SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
    ENDIF.
    elseif ulke ne 'TR' and answer eq 1.
    lt_mailtxt ='Dear Customer,'.
    APPEND lt_mailtxt.clear lt_mailtxt.
    lt_mailtxt = 'Your compliant has just entered to system. Customer complaint responsible will contact with you ASAP.'.
    APPEND lt_mailtxt.clear lt_mailtxt.
    lt_mailtxt = 'Thanks for your complaint.'.
    APPEND lt_mailtxt.clear lt_mailtxt.
    gd_doc_data-doc_size = it_packing_list-body_num * 255.
    Populate the subject/generic message attributes
      gd_doc_data-obj_langu = sy-langu.
      gd_doc_data-obj_name  = 'SAPRPT'.
      gd_doc_data-obj_descr = 'Naksan KGM'.
      gd_doc_data-sensitivty = 'F'.
    Describe the body of the message
      clear it_packing_list.
      refresh it_packing_list.
      it_packing_list-transf_bin = space.
      it_packing_list-head_start = 1.
      it_packing_list-head_num = 0.
      it_packing_list-body_start = 1.
      describe table lt_mailtxt lines it_packing_list-body_num.
      it_packing_list-doc_type = 'RAW'.
      append it_packing_list.
      CLEAR it_receivers.
      it_receivers-receiver =  email.
      it_receivers-rec_type = 'U'.
      it_receivers-com_type = 'INT'.
      it_receivers-notif_del = 'X'.
      it_receivers-notif_ndel = 'X'.
      append it_receivers.
      call function 'SO_DOCUMENT_SEND_API1'
           exporting
                document_data              = gd_doc_data
                put_in_outbox              = 'X'
                sender_address             = 'peykan.samli@****.com'
                sender_address_type        = 'INT'
                commit_work                = 'X'
           importing
                sent_to_all                = gd_sent_all
           tables
                packing_list               = it_packing_list
                contents_txt               = lt_mailtxt[] "it_message
                receivers                  = it_receivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    IF sy-subrc EQ 0.
      COMMIT WORK.
      Push mail out from SAP outbox.
      SUBMIT rsconn01 WITH mode = 'INT' AND RETURN.
    ENDIF.

  • TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

    great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

    Here's what I get:
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:11:24:7d:e7:1e
    media: autoselect (none) status: inactive
    supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
    inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
    ether 00:11:24:28:2e:71
    media: autoselect status: active
    supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
    lladdr 00:11:24:ff:fe:7d:e7:1e
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>

  • XI IDoc Acknowledgement - Acknowledgement not possible status

    Hi Experts,
    My scenario:
    SAP IDOC - XI - jdbc (oracle)
    Problem:
    Getting the infamous "Acknowledgement not possible" status in SXI_MONI. I only need the transport acknowledgements back to SAP not the application acknowledgements. The messages themselves route fine from source to destination.

    check if this blog helps you:
    /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
    From the blog:
    The system acknowledgement sent by the file adapter is converted into an ALE audit message and sent
    back to the sender SAP system by an IDOC ACK channel configured in XI(an IDOC receiver adapter).
    For your info:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
    Edited by: abhishek salvi on May 15, 2009 10:48 AM

  • SQL LOADER Problem when data is loaded but not come in standard formate

    Hi guys,
    I got problem when sql loader run data loaded successfully in table but UOM data not come in standard formate.
    UOM table column contains the Unit of measure data but in my excel sheet it's look like :
    EXCEl SHEET DATA:
    1541GAFB07080          0     Metres
    1541GAFE10040          109.6     Metres
    1541GAFE10050          594.2     Metres
    1541GAFE10070          126.26     Metres
    1541GAFE14040          6.12     Metres
    1541GAFE14050          0     Metres
    1541SAFA05210          0     Metres
    1541SAFA07100          0     Metres
    1551EKDA05210          0     Nos
    1551EKDA07100          0     Nos
    1551EKDA07120          0     Nos
    1551EKDA07140          0     Nos
    1551EKDA07200          0     Nos.
    1551EKDA08160          0     Nos.
    1551EKDA08180          0     Nos.
    1551EKDA08200          0     Nos.
    1551EKDA10080          41     Nos.
    1551EKDA10140          85     Nos.
    .ctl file :
    OPTIONS (silent=(header,feedback,discards))
    LOAD DATA
    INFILE *
    APPEND
    INTO TABLE XXPL_PO_REQUISITION_STG
    FIELDS TERMINATED BY ','
    OPTIONALLY ENCLOSED BY'"'
    TRAILING NULLCOLS
    ( ITEM_CODE CHAR,
    ITEM_DESCRIPTION CHAR "TRIM(:ITEM_DESCRIPTION)",
    QUANTITY,
    UOM,
    NEED_BY_DATE,
    PROJECT,
    TASK_NAME,
    BUYER,
    REQ_TYPE,
    STATUS,
    ORGANIZATION_CODE,
    LOCATION,
    SUBINVENTORY,
    LINE_NO,
    REQ_NUMBER,
    LOADED_FLAG CONSTANT 'N',
    SERIAL_NO "XXPL_PRREQ_SEQ.NEXTVAL",
    CREATED_BY,
    CREATION_DATE SYSDATE,
    LAST_UPDATED_BY,
    LAST_UPDATED_DATE,
    LAST_UPDATED_LOGIN
    Some output came in table like:
    W541WDCA05260 0 Metres|
    W541WDCA05290 3 Metres|
    W541WDCA05264 4 Metres|
    W541WDCA05280 8 Metres|
    1551EADA04240 0 Nos|
    1551EADA07100 0 Nos|
    1551EKDA10080 0 Nos.|
    1551EKDA10080 41 Nos.|
    proble in | delimiter...how to remove it ' | ' from my table when sqlloader program runnig ...... where i can change in .ctl file or excel file....it's urgent guys olz help me ..
    thanks

    Hi,
    How are you extracting the data to Excel sheet ?
    Please check the format type of the column in Excel sheet for UOM.
    There is no issue in the SQL loader control file, but issue is there in your source excel file. (Try using a different method to extract the data to Excel sheet.)
    Regards,
    Yuvaraj.C

  • Few CRs are coimng under "Not Completed" status in CRM_DNO_MONITOR transact

    Hi All,
    Few (only 3) change requests are coming in "Not Completed" status in CRM_DNO_MONITOR transaction. Ideally all closed change requests should not come under "Not Completed" staus when reporting is done.
    Kindly help.

    Hi,
    Please try to implement this note
    1459839    CRM_SOCM_SERVICE_REPORT: no update on CRMD_ORDER wo
    if after this still issue persists, then please run
    CRM_INDEX_REBUILD to correct the CR's status
    Hope this helps.
    Cheers
    SH

  • MANAGED SERVER NOT COMMING UP  FROM ADMIN CONSOLE,

    Hi All,
    I can't start managed server from admin console.
    The status is showing FAILED_NOT_RESTARTABLE.
    below is the error it is showing in the node manager.
    But i can start managed server from the back-end successfully. If i start the nodemanager then managed server is not comming up.
    <May 24, 2011 4:12:22 AM> <WARNING> <Exception while starting server 'my_managed
    _server'>
    java.io.IOException: Server failed to start up. See server output log for more d
    etails.
    at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServe
    rManager.java:200)
    at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23
    at weblogic.nodemanager.server.Handler.handleStart(Handler.java:604)
    at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:121)
    at weblogic.nodemanager.server.Handler.run(Handler.java:71)
    at java.lang.Thread.run(Thread.java:662)
    May 24, 2011 4:12:22 AM weblogic.nodemanager.server.Handler handleStart
    WARNING: Exception while starting server 'my_managed_server'
    java.io.IOException: Server failed to start up. See server output log for more d
    etails.
    at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServe
    rManager.java:200)
    at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23
    at weblogic.nodemanager.server.Handler.handleStart(Handler.java:604)
    at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:121)
    at weblogic.nodemanager.server.Handler.run(Handler.java:71)
    at java.lang.Thread.run(Thread.java:662)
    Please help.
    Regards,
    nag.

    <May 24, 2011 4:12:18 AM> <INFO> <weblogic_domain> <my_managed_server> <Working directory is 'C:\Oracle\Middleware\user_projects\domains\weblogic_domain'>
    <May 24, 2011 4:12:18 AM> <INFO> <weblogic_domain> <my_managed_server> <Rotated server output log to "C:\Oracle\Middleware\user_projects\domains\weblogic_domain\servers\my_managed_server\logs\my_managed_server.out00039">
    <May 24, 2011 4:12:18 AM> <INFO> <weblogic_domain> <my_managed_server> <Server error log also redirected to server log>
    <May 24, 2011 4:12:18 AM> <INFO> <weblogic_domain> <my_managed_server> <Server output log file is 'C:\Oracle\Middleware\user_projects\domains\weblogic_domain\servers\my_managed_server\logs\my_managed_server.out'>
    <May 24, 2011 4:12:22 AM> <INFO> <weblogic_domain> <my_managed_server> <Server failed during startup so will not be restarted>
    <May 24, 2011 4:12:22 AM> <WARNING> <Exception while starting server 'my_managed_server'>
    java.io.IOException: Server failed to start up. See server output log for more details.
         at weblogic.nodemanager.server.AbstractServerManager.start(AbstractServerManager.java:200)
         at weblogic.nodemanager.server.ServerManager.start(ServerManager.java:23)
         at weblogic.nodemanager.server.Handler.handleStart(Handler.java:604)
         at weblogic.nodemanager.server.Handler.handleCommand(Handler.java:121)
         at weblogic.nodemanager.server.Handler.run(Handler.java:71)
         at java.lang.Thread.run(Thread.java:662)
    This is what i found in nodemanager log file
    Regards,
    Nag.

  • Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not compleet. the ipod will not do anything at all... please help me

    Hello, well im having some problems with my ipod 4th gen it will not turn on and when i plug it in to itunes it will not come up saying i need to restore. when i try that it will not complet. the ipod will not do anything at all... please help me i havent got  extra money to spend..

    Just what happens when the restore does not complete?
    Error message?
    Does it freeze? Is so what is listed in the status bar of iTunes?

  • Print out not comming

    Hi,
    I worked with 2 output types LD01 and LD00.
    For LD01 Print is comming but LD00 it's not comming.
    When ever i press print in Spool Request is genarated and status was Completed for both output types,but LD00 it's not comming print.
    Printers are same page formats also same.
    Thanksu,
    Rao

    Hi narasimha,
    For  LD01  check whether  you assigned the program name and form routine.
    Regards,
    Sravanthi

  • HTTPService still not reporting status 500

    I was told that the HTTPService (using POST) has been enhaced
    to better report server side errors. In particular, when the server
    responds with a status 500 one is not able to see the actual error
    from the server.
    This problem still exists and as a result makes using Flex as
    an RIA platform not play by the rules. Meaning, one can't have
    multiple front end applications using the same server side
    application without having to do special things for Flex
    applications.
    Since the http socket in browsers support this capability I
    don't understand why Flash player has limitations in this regard.
    More importantly, is this going to be fixed?

    The issue:
    someone installed the SUP role for SCCM 2007 and configured it for the separate WSUS server (on Windows server 2012). They didn't select "Create all WSUS reporting events"for the SUP role, and we have abandoned SCCM's SUP role. So now all of our clients
    are still updating with our WSUS server but not reporting status.
    Yeah, I hate when that happens, and you're not the first victim of this particular scenario. The setting can be reset via the API, and I believe that there's a VB script or a PowerShell script (or maybe both) on CodePlex that can be used to reset the reporting
    option on the WSUS server.
    Actually, since this is a WSUS v6 server, you may be able to configure it directly using PowerShell now, given the assortment of API functionality that is now exposed in PowerShell.
    If not natively, also check out the PoshWSUS package, which almost certainly supports this option configuration.
    Arguably when converting from a SUP to a standalone WSUS server, it would be better to build the WSUS server from scratch, which also would eliminate this issue. Consider how many superseded updates were expired by Configuration Manager, that NOW...
    maybe you don't want to be expired? (Or worse, have already been deleted by the Server Cleanup Wizard because they
    were expired.)
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • WSUS - "this computer has not reported status yet" Windows server 2003

    I just did a successful installation of wsus 3.0 Sp2
    I am able to see all the machines but the issue starts there
    Each of the machine show this error " this computer has not reported status yet"
    i have tried but hasnt manage to resolve this issue
    kindly guide me on how i can resolve it
    thx

    2013-06-26 14:20:36:633
    644 478
    AU ##  END  ##  AU: Search for updates [CallId = {4E48EF51-0D7C-458A-A575-9BA1B4799175}]
    2013-06-26 14:20:36:633
    644 478
    AU #############
    2013-06-26 14:20:36:634
    644 478
    AU Successfully wrote event for AU health state:0
    2013-06-26 14:20:36:634
    644 478
    AU AU setting next detection timeout to 2013-06-26 16:20:36
    2013-06-26 14:20:36:634
    644 478
    AU Setting AU scheduled install time to 2013-06-27 00:00:00
    2013-06-26 14:20:36:634
    644 478
    AU Successfully wrote event for AU health state:0
    2013-06-26 14:20:36:634
    644 478
    AU Successfully wrote event for AU health state:0
    2013-06-26 14:20:41:581
    644 1338
    Report REPORT EVENT: {8DFBD635-02A8-4773-9DF8-80880752189A}
    2013-06-26 14:20:36:577+0300 1
    148 101
    {D67661EB-2423-451D-BF5D-13199E37DF28}
    1 800b0001
    SelfUpdate Failure
    Software Synchronization Windows Update Client failed to detect with error 0x800b0001.
    2013-06-26 14:20:41:621
    644 1338
    Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2013-06-26 14:20:41:621
    644 1338
    Report WER Report sent: 7.6.7600.256 0x800b0001 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
    2013-06-26 14:20:41:621
    644 1338
    Report CWERReporter finishing event handling. (00000000)
    2013-06-26 14:22:41:605
    644 1338
    Report Uploading 1 events using cached cookie, reporting URL = http://NTKE01/ReportingWebService/ReportingWebService.asmx
    2013-06-26 14:22:41:612
    644 1338
    Report Reporter successfully uploaded 1 events.
    2013-06-26 15:25:02:219
    644 13d0
    AU Triggering AU detection through DetectNow API
    2013-06-26 15:25:02:219
    644 13d0
    AU Triggering Online detection (non-interactive)
    2013-06-26 15:25:02:220
    644 718
    AU #############
    2013-06-26 15:25:02:220
    644 718
    AU ## START ##  AU: Search for updates
    2013-06-26 15:25:02:220
    644 718
    AU #########
    2013-06-26 15:25:02:221
    644 718
    AU <<## SUBMITTED ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
    2013-06-26 15:25:02:221
    644 179c
    Agent *************
    2013-06-26 15:25:02:221
    644 179c
    Agent ** START **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2013-06-26 15:25:02:221
    644 179c
    Agent *********
    2013-06-26 15:25:02:221
    644 179c
    Agent  * Online = Yes; Ignore download priority = No
    2013-06-26 15:25:02:222
    644 179c
    Agent  * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
    and DeploymentAction='Uninstallation' and RebootRequired=1"
    2013-06-26 15:25:02:222
    644 179c
    Agent  * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
    2013-06-26 15:25:02:222
    644 179c
    Agent  * Search Scope = {Machine}
    2013-06-26 15:25:02:242
    644 179c
    Setup Checking for agent SelfUpdate
    2013-06-26 15:25:02:242
    644 179c
    Setup Client version: Core: 7.6.7600.256  Aux: 7.6.7600.256
    2013-06-26 15:25:06:522
    644 179c
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
    2013-06-26 15:25:06:530
    644 179c
    Misc Microsoft signed: Yes
    2013-06-26 15:25:06:533
    644 179c
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2013-06-26 15:25:06:558
    644 179c
    Misc Microsoft signed: Yes
    2013-06-26 15:25:08:643
    644 179c
    Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
    2013-06-26 15:25:08:647
    644 179c
    Misc Microsoft signed: Yes
    2013-06-26 15:25:08:700
    644 179c
    Setup Determining whether a new setup handler needs to be downloaded
    2013-06-26 15:25:08:700
    644 179c
    Setup SelfUpdate handler is not found.  It will be downloaded
    2013-06-26 15:25:08:700
    644 179c
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
    2013-06-26 15:25:09:376
    644 179c
    Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
    2013-06-26 15:25:09:376
    644 179c
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
    2013-06-26 15:25:09:388
    644 179c
    Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
    2013-06-26 15:25:09:388
    644 179c
    Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
    2013-06-26 15:25:09:406
    644 179c
    Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
    2013-06-26 15:25:09:406
    644 179c
    Setup SelfUpdate check completed.  SelfUpdate is NOT required.
    2013-06-26 15:25:09:466
    644 179c
    PT +++++++++++  PT: Synchronizing server updates  +++++++++++
    2013-06-26 15:25:09:466
    644 179c
    PT  + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://NTKE01/ClientWebService/client.asmx
    2013-06-26 15:25:09:536
    644 179c
    PT WARNING: Cached cookie has expired or new PID is available
    2013-06-26 15:25:09:536
    644 179c
    PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
    2013-06-26 15:25:09:536
    644 179c
    PT  Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
    2013-06-26 15:25:17:456
    644 179c
    PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
    2013-06-26 15:25:17:456
    644 179c
    PT WARNING: SOAP Fault: 0x00012c
    2013-06-26 15:25:17:457
    644 179c
    PT WARNING:     faultstring:Fault occurred
    2013-06-26 15:25:17:457
    644 179c
    PT WARNING:     ErrorCode:ConfigChanged(2)
    2013-06-26 15:25:17:457
    644 179c
    PT WARNING:     Message:(null)
    2013-06-26 15:25:17:457
    644 179c
    PT WARNING:     Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
    2013-06-26 15:25:17:457
    644 179c
    PT WARNING:     ID:78fa31e8-8714-47b9-8ae3-182ecb2d9f74
    2013-06-26 15:25:17:477
    644 179c
    PT WARNING: Cached cookie has expired or new PID is available
    2013-06-26 15:25:17:477
    644 179c
    PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
    2013-06-26 15:25:17:477
    644 179c
    PT  Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
    2013-06-26 15:27:50:499
    644 718
    AU AU received policy change subscription event
    2013-06-26 15:31:23:807
    644 13d0
    AU Triggering AU detection through DetectNow API
    2013-06-26 15:31:23:807
    644 13d0
    AU Piggybacking on an AU detection already in progress
    2013-06-26 15:31:27:317
    644 13d0
    AU Triggering AU detection through DetectNow API
    2013-06-26 15:31:27:317
    644 13d0
    AU Piggybacking on an AU detection already in progress
    2013-06-26 15:36:56:942
    644 179c
    PT WARNING: SyncUpdates failure, error = 0x8024400A, soap client error = 10, soap error code = 0, HTTP status code = 200
    2013-06-26 15:36:56:942
    644 179c
    PT WARNING: PTError: 0x8024400a
    2013-06-26 15:36:56:942
    644 179c
    PT WARNING: SyncUpdates_WithRecovery failed.: 0x8024400a
    2013-06-26 15:36:56:942
    644 179c
    PT WARNING: Sync of Updates: 0x8024400a
    2013-06-26 15:36:56:942
    644 179c
    PT WARNING: SyncServerUpdatesInternal failed: 0x8024400a
    2013-06-26 15:36:56:942
    644 179c
    Agent  * WARNING: Failed to synchronize, error = 0x8024400A
    2013-06-26 15:36:56:943
    644 179c
    Agent  * WARNING: Exit code = 0x8024400A
    2013-06-26 15:36:56:943
    644 179c
    Agent *********
    2013-06-26 15:36:56:943
    644 179c
    Agent **  END  **  Agent: Finding updates [CallerId = AutomaticUpdates]
    2013-06-26 15:36:56:943
    644 179c
    Agent *************
    2013-06-26 15:36:56:943
    644 179c
    Agent WARNING: WU client failed Searching for update with error 0x8024400a
    2013-06-26 15:36:56:959
    644 8dc
    AU >>##  RESUMED  ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
    2013-06-26 15:36:56:959
    644 8dc
    AU  # WARNING: Search callback failed, result = 0x8024400A
    2013-06-26 15:36:56:959
    644 8dc
    AU  # WARNING: Failed to find updates with error code 8024400A
    2013-06-26 15:36:56:959
    644 8dc
    AU #########
    2013-06-26 15:36:56:959
    644 8dc
    AU ##  END  ##  AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
    2013-06-26 15:36:56:959
    644 8dc
    AU #############
    2013-06-26 15:36:56:959
    644 8dc
    AU Successfully wrote event for AU health state:0
    2013-06-26 15:36:56:959
    644 8dc
    AU AU setting next detection timeout to 2013-06-26 17:36:56
    2013-06-26 15:36:56:959
    644 8dc
    AU Setting AU scheduled install time to 2013-06-27 00:00:00
    2013-06-26 15:36:56:959
    644 8dc
    AU Successfully wrote event for AU health state:0
    2013-06-26 15:36:56:960
    644 8dc
    AU Successfully wrote event for AU health state:0
    2013-06-26 15:37:01:943
    644 179c
    Report REPORT EVENT: {48D1738E-F97A-45A4-8AB5-ECBE8FBDDF8F}
    2013-06-26 15:36:56:943+0300 1
    148 101
    {00000000-0000-0000-0000-000000000000}
    0 8024400a
    AutomaticUpdates Failure
    Software Synchronization Windows Update Client failed to detect with error 0x8024400a.
    2013-06-26 15:37:01:950
    644 179c
    Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
    2013-06-26 15:37:01:950
    644 179c
    Report WER Report sent: 7.6.7600.256 0x8024400a 00000000-0000-0000-0000-000000000000 Scan 101 Managed
    2013-06-26 15:37:01:951
    644 179c
    Report CWERReporter finishing event handling. (00000000)
    2013-06-26 15:39:01:979
    644 179c
    PT WARNING: Cached cookie has expired or new PID is available
    2013-06-26 15:39:01:979
    644 179c
    PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
    2013-06-26 15:39:01:979
    644 179c
    PT  Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
    2013-06-26 15:39:02:302
    644 179c
    PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
    2013-06-26 15:39:02:302
    644 179c
    PT WARNING: SOAP Fault: 0x00012c
    2013-06-26 15:39:02:302
    644 179c
    PT WARNING:     faultstring:Fault occurred
    2013-06-26 15:39:02:302
    644 179c
    PT WARNING:     ErrorCode:ConfigChanged(2)
    2013-06-26 15:39:02:302
    644 179c
    PT WARNING:     Message:(null)
    2013-06-26 15:39:02:302
    644 179c
    PT WARNING:     Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
    2013-06-26 15:39:02:302
    644 179c
    PT WARNING:     ID:38d9b059-92f2-4248-9a71-be1e33841fcb
    2013-06-26 15:39:02:311
    644 179c
    PT WARNING: Cached cookie has expired or new PID is available
    2013-06-26 15:39:02:311
    644 179c
    PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
    2013-06-26 15:39:02:311
    644 179c
    PT  Server URL = 
    AS you can see the log file is bigggggg..
    pls advise

Maybe you are looking for