Inv. Consign. - Stock category K  is not permitted for general stock search

Hi,
IS-Retail ECC 6.0
Unable to select another vendor consignment inventory for the same article at TO creation. Get the following message:
+Stock category K  is not permitted for general stock search+
+Message no. L3727+
+Diagnosis+
+You have entered a stock category (special stock indicator and special stock number) during transfer order creation that is not permitted by general stock determination.+
+Example:+
+General stock determination only allows you to enter stock categories 'own stock' and 'consignment stock' of vendor 6411. You cannot enter special stock 'K' and special stock of (vendor) 6512+.
Not using batch management but already applied OSS note1034907 - Picking consignment stock in Warehouse Management without success.
Any idea?
Thanks
Gaetan

There is the response back from SAP on the subject. We also faced the situation where the stock determination was done but we had no stock available for the first sorted stock in this case our own stock. We have than created a user exit to take out any 0 line item from the sort to bypass this problem and get the next stock vendor available . Hope that will help.
Gaetan
In the retail consignment processing the stock split is excluded during
stock determination. That means, you have to set the stock split to 1.
In your case, if you check the customizing settings of the stock
determination for
- site 1100,
- stock determination rule Z001 and
- stock determination groupe Z001,
the stock split or the number of splits is 002. But, this is not
possible in coherence with the retail consignment processing and the
creation of a TO. We will prevent such a scenario also in the coding.
Therefore you are not able to select another vendor for consignment. In
this case you have to change/adjust your customizing settings for stock
determination. Please check also the usage of an alternate stock
determination rule.
For further information, please check/compare also the documentation.
Customizing documentation:
When stock determination is activated, the stock split is excluded
during stock determination, which means you have to set the stock
split to 1.
Documentation in the Help Portal:
* It is not possible to make a partial delivery of a delivery item
from both consignment stock and a company's own stock. Nor can you
deliver an item from the consignment stock of serveral special stock
managers.
That means, please check/adjust your customizing settings for the stock
determination.

Similar Messages

  • Error message: The item category 'ZTPS' is not permitted for product '134'

    Hi experts,
    When I try to create a sales order in CRM, I find the error: "The item category 'ZTPS' is not permitted for product '134'".
    how can I solve this problem?
    thank you for helping me,
    Marco

    hi,
    I tried to perform the "define item category determination" activity, but the problem is that the possible entries for "Item category groups" and "Item usage" are different in the two systems:
    for example in R/3 I find some entries with Item Category group = LEIH (returnable packaging),
    when i try to insert this Item category group in CRM i press f4 to see possible entries but Ican't find the value LEIH.
    how is it possible?
    THANK YOU!
    m

  • Item category customizing issue(The item category 'SRTT' is not permitted

    Hi guys:
    I got a material product, the caterory of the product is created by myself.
    I trid to add the product to my service order item, but the error message said ,"
    <b>The item category 'SRTT' is not permitted for product 'BO_3000000018'.
    Message no. CRM_ORDERADM_I507
    Diagnosis
    The item category SRTT is not allowed in Customizing for item category determination of the specified transaction type, or in the item category group of the product BO_3000000018.
    System Response
    The system does not allow the item to be processed further.
    u can display the specified input options. Place the cursor in the document on the field Item category and choose F4 = input options</b>
    I tried many item category but the same error kept jumping out.
    does anybody know the solution? thanks!
    best regards
    Eric

    Hi Eric
    You nay have to set the item category determination properly.
    Fileds are you chould have an entry which should be something like this
    Trans type -
    Item cat group---The item cat that has to appear in your doc.
    for example:
    TA -
    Standard Group-----TAN
    The Item category group field is in the one you have given in your material master.
    Hope this helps you.
    Alicia

  • The (technical) item category 01001 is not permitted Message no. GLT1170

    In the IMG Activity " Classify G/L Accounts for Document Splitting" while assignment of GL Account 3XXXXXX with  Item Category 01001 (Zero Balance Posting (Free Balancing Units) giving Error message :
    The (technical) item category 01001 is not permitted  Message no. GLT1170
    For solution did following Activity
    - Define Define Zero Balance Clearing Account, In this activity i assigned GL Account 3XXXXXX
    -Check following SAP Notes :
    Note 1069228 - GLT2 076 There is no item category assigned to account &1/&2
    Note 1253094 - Document splitting: Incorrect error message GLT2 101
    Note 1137217 - Alternative business transaction variant II
    Note 1087581 - Alternative business transaction variant
    Note 1335743 - FAGL_MIG 093: FAGL_CHECK_DOC_ITEM_CATEGORIES II
    Note 1358696 - Document splitting: Business transaction "SKIP"
    All correction are in place, but still error message is there, Looking for suggestion

    Hi,
    1. In order that document splitting recognizes how the individual document items are to be handled, you need to classify them. You do this by assigning them to an item category. The item category is determined by the account number.
    You need to assign the following accounts in the system
    1. Revenue account
    2. Expense account
    3. Bank account/cash account
    4. Balance sheet account
    The classification of all other accounts is known to the system, so you do not have to enter them here.
    The following item categories are included in the system:
    1. Customer
    2. Vendor
    3. Cash discount offsetting
    4. Asset
    5. Material
    6. Expense
    7. Revenue
    2. In short, Exclude item category 1001, which is technical, in fact you only need to assign the item categories like, B/S Account, Cash Account, Expenses Account or Revenue Account according to you general ledger number range.
    If the GL Account 3xxxxx  is the balance sheet account then simply use the item category 1000.
    In such case, you can ignore the warning message and continue saving. It is appearing because you are changing the numbers
    Thanks,
    Raviteja

  • Standard Role for 000000 for role category MKK is not permitted

    Hello SAP Gurus,
    I am working on RM-CA and was trying to create a business partner using T-code FPP1 and BUP1.
    I was trying to create a business partner as an organization.
    WHen I try to save the record I get the error "Standard Role for 000000 for role category MKK is not permitted" Msg P082.
    I've checked the view V_TB003 and I see that the Standard Role is assigned to the MKK category.
    Has anyone encountered this problem before? What is the fix for this? What am I missing?
    Thanks

    Hi Jamal,
    Please check the following steps:
    1. In view V_TB003, please check if the BP role category "MKK" is assigned to the BP role "MKK".
    2. In view V_TB109, please check if the BP role category "MKK" is assigned to the transaction code FPP1
    I hope it helps!
    Regards,
    Gabriel Santana

  • The (technical) item category 01001 is not permitted

    Hi ,
    I am classifying the GL Accounts for Document splitting ,
    GL A/C 1999990 (i.e)Segment clearing i am defining in Document splitting , the following Error occured
    The (technical) item category 01001 is not permitted.
    Please advise on this ,
    Regards

    Hi,
    Please refer to SAP note no. 1137217 for the same.
    Regards,
    Shailesh Verma

  • Error when replicating material master - Value not permitted for PO Unit

    Hi all,
    I am having the following issue. I am trying to replicate material master from ECC 6.0 to CRM 5.0, but I am getting an error to which I am not being able to find the solution:
    Value GFO is not permitted for attribute Purchase Order Unit
        Message no. COM_PRCAT020
    Diagnosis
        You want to specify that the value GFO is allowed for the attribute Purchase Order Unit. However, in attribute maintenance or in the
        higher-level category ('parent category'), you specified that the value GFO is not allowed for this attribute.
    I tried to find where to edit this attribute in Customizing, and also in tcode COMM_ATTRSET, but I have no idea if this was the right direction.
    Has anyone faced this issue before? I would really appreciate any help, since this is preventing me from completing material replication.
    Thanks in advance.
    Best regards,
    Joã

    Hello Sudipta,
    I checked the attribute in COMM_ATTRSET, but there aren't any specific values for it. There is a value table T006, which I believe is standard, and it contains UoM GFO.
    With this being the case, the error I'm getting makes even less sense to me...
    Can you tell me if in there is any other place in CRM where we can set UoM?
    Thank you, once again.
    Regards,
    Joã

  • Value . . is not permitted for attribute Date of Manufacture Message no. COM_PRCAT020

    Hi
    We are using CRM 7 ehp2 system we are facing a problem some equipment number is not updating from  ECC to CRM.
    showing following bdoc error message.
    Value . . is not permitted for attribute Date of Manufacture
    Message no. COM_PRCAT020
    Diagnosis
    You want to specify that the value . . is allowed for the attribute Date of Manufacture. However, in attribute maintenance or in the higher-level category ('parent category'), you specified that the value . . is not allowed for this attribute.
    Error when creating objects
    Message no. IB_CRM_UPLOAD_MSG019
    Error when creating products from equipment BDoc
    Message no. IB_CRM_UPLOAD_MSG012
    Error when creating objects
    Message no. IB_CRM_UPLOAD_MSG019
    Error calling the upload BAdI; method: perform_load
    Seeking your help for resolving this issue.
    Best Regards
    Manoj

    Hi Manoj,
    Refer  to the KBA 1880999
    This should be useful in resolving the issue.
    Best Regards,
    Gervase

  • An entry in field Funds Ctr is not permitted for account 401000 Message no F5394

    Hi Friends,
    I have done Fund Management configuration and while posting the document through FB50, I am getting error message " An entry in field Funds Ctr is not permitted for account 401000 "Message no. F5394 and I also checked Field status and Posting keys for Gl account and everything looks fine..
    Please help on this..
    Thanks
    Goutam

    Hi,
    please check the message the error will give you the table number or Programme  name
    go to SE38  for programme and for table SM30
    system will show where is the exact error facing.
    thanks

  • An out-of-sequence check is not permitted for payroll type B

    We had to  do advance payments for 4 pay periods for an employee through offcycle workbench. One of the checks was wrong so we had to reverse it. It is an out of sequence reversal. Now when i try to do a correction run , it gives me an error An out-of-sequence check is not permitted for payroll type B
    How can i run the correction run now. Please help
    Edited by: sagarika sharma on Aug 14, 2010 6:29 AM

    Check with SAP note 1425764,696067 and 1127119.
    Mohan

  • Item category RENN is not defined for this item

    Hey SD experts,
    I've created a sales order with free of charge and standard items.
    Now, I'm trying to create a return order with reference to this sales order.
    I got this error message: Item category RENN is not defined for this item.
    I've checked in VOV4 : the combination Sales document type + Itemcategory group =>Itemcategory seems to be correct.
    Why am I getting this error message then ?
    Regards,
    Bahia.

    Dear Bahia,
    Check item level copy control settings between Sales order free of charge and Return sales order i.e copy control settings between free of charge order item category and returns order itemcategory.
    Once again check item category determination through VOV4 transaction for the combination of
    Your returns order document type+Itemcategory group-->RENN.
    I hope this will help you,
    Regards,
    Murali.

  • Idoc-51:Accounting transaction not permitted for posting in FI/CO

    Hi,
    Message type FIDCC2
    Basic type FIDCCP02
    Process code FID2
    When i try to post for F-02, through WE19, above idoc, it is showing the 51 error: Accounting transaction not permitted for posting in FI/CO
    I'm using the following fields:
    E1FIKPF : FI Document Header (BKPF)
    BUKRS : Name of global company code
    GJAHR : Fiscal Year
    BLART : Document Type
    BLDAT : Document Date in Document
    BUDAT : Posting Date in the Document
    MONAT : Fiscal Period
    TCODE : Transaction Code
    WAERS : Currency Key
    HWAER : Local Currency
    E1FISEG : FI Document Item (BSEG) -1
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 40
    DMBTR : Amount in Local Currency
    KOSTL : Cost Center
    HKONT : General Ledger Account
    WERKS : Site
    E1FISEG : FI Document Item (BSEG) -2
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 50
    DMBTR : Amount in Local Currency
    HKONT : General Ledger Account
    WERKS : Site
    Pls guide in fixing this.
    rgds,
    balu

    Hi 
    What is the solution , please let us know ? since we have faced the same error.
    Regards
    Bhavana

  • Accounting transaction not permitted for posting in FI/CO

    Hi,
    For inbound idoc triggering,
    Message type FIDCC2
    Basic type FIDCCP02
    Process code FID2
    When i try to post for F-02(or FB01), through WE19, above idoc, it is showing the 51 error: Accounting transaction not permitted for posting in FI/CO
    I'm using the following fields:
    E1FIKPF : FI Document Header (BKPF)
    BUKRS : Name of global company code
    GJAHR : Fiscal Year
    BLART : Document Type - SA
    BLDAT : Document Date in Document
    BUDAT : Posting Date in the Document
    MONAT : Fiscal Period - 05
    TCODE : Transaction Code - FB01
    WAERS : Currency Key
    HWAER : Local Currency
    GLVOR : Business Transaction - RFBU
    E1FISEG : FI Document Item (BSEG) -1
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 40
    DMBTR : Amount in Local Currency
    KOSTL : Cost Center
    HKONT : General Ledger Account
    WERKS : Site
    E1FISEG : FI Document Item (BSEG) -2
    BUZEI : Number of Line Item Within Accounting Document
    BSCHL : Posting Key - 50
    DMBTR : Amount in Local Currency
    HKONT : General Ledger Account
    WERKS : Site
    For which fields u've triggered successfully, pls help in resolving the same.
    rgds,
    balu

    Hi,
    i appreciate for your quick reply...
    i've applied the code corrections in the FM FI_IDOC_PREPARE , but still same error coming.
    tnx n rgds,
    balu

  • Value & is not permitted for attribute Sales Unit - Material Object

    Hi gurus,I would very much appreciate expert advice on how to solve the problem I´m facing when lauching middleware object MATERIAL.
    I have 2 BDocs in red showing the following error:
    Value B20 is not permitted for attribute Purchase Order Unit
    Value B20 is not permitted for attribute Sales Unit
    I have checked table T006 and customizing and I do have unit of measurement B20 created on CRM so I don´t understand where is the error.
    Could you please help me?
    Thanks in advanced,
    Regards,
    Lorena.

    Dear Lorena,
    Many Thanks.
    ok, I need to do manually in the CRM system.  I have one question
    1: If any changes in the ERP system the data is automatically replicated in to CRM system right? then Why we need to Configure again in the CRM system. for Examaple: Proudct group and Tax.
    2.  No, I did not replicate Sales Org., but this is also automatically replicated into CRM system. But it is already replicated into CRM i.e. Initial download.
    my question is in r/3: If one customer have 2 Sales Area data is maitained in the R/3, that information is also available in the CRM side. if one more  sales area is assigned to same customer, that information is also availbale in the CRM system right? but I could not able to find the new sales area data. what is the reason? and how I can dowload the changes in the CRM system?
    I realy thanks to you, providing most valuable information and supporting to me.
    kindly provide me where should I promote points to you.
    I will try and let you know, if I am getting any problem, I will ask you again.
    Thanks and Regards,
    Jags

  • Plant Not permitted for selected Doc Type

    I have created new plant and assigned to existing Purchase organization. i am able to create PR but while creating Purchase order i am getting error
    Plant Not permitted for selected Doc Type

    what is the error message number? double click the message to obtain.
    I have not seen any assignment of doucment types to plants, nor a message like mentioned.

Maybe you are looking for

  • Help Viewer is an issue with InDesign CS6

    Would anyone happen to know if the Help Viewer is an issue with InDesign CS6? Even with a manual install the Help feature launches without issues the first time and won't launch after the second time. This is the message we are receiving on Windows 7

  • Whenever I boot my pc, which operates on windows 64 bit, I receive the erroer message: 'The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library  SQlite3.dll

    Whenever I boot my pc, which operates on windows 64 bit, I receive the erroer message: 'The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll' This appears to be a common problem, can anyone pro

  • Maintenance

    hi, my first question is as follows : when i run disk check in hp support assistant i find smart check issue then i go to help it says defragment the disk in details of defrtagmentation i find first analyze it if it is 10% or above then defragment it

  • Batch delete activities

    I am trying to perform a batch delete on activities that were incorrectly loaded into the CRM. I use the advanced search function to isolate the activities that need to be deleted. I then use menu and select batch delete. The batch delete is loaded a

  • Select for update timing out

    Hi there when I do a simple select statement like select * from table I recieve all the records without a problem when I add 'for update' like select * from table for update this seems to take a long time (I don't actually get a result) Is there some