INV_INSPECTION_FLAG_ERR in the mtl_interface_errors table for UPDATE

Hi ,
I am doing Item UPDATE interface through Back end
i am getting error in the mtl_interface_errors table like below
COLUMN_NAME ERROR_MESSAGE
INSPECTION_REQUIRED_FLAG Inspection Required Flag cannot be set to "Y" if Receipt Routing is not set to Inspection.
what is happening?

PranitSaha wrote:
Probably you are using an item template that contains conflicting item attribute values.
Sent from my iPhone
Hi,
Thanks for reply,I am not using Item Template in the Insert statement to the interface table,
I am just inserting into org_id,item_no,process_flag, pr0cess_id...
can you please explain more?

Similar Messages

XD02 transaction to change the customer data for updating KNA1 table?

Hi all,
How can we use XD02 transaction to change the customer data for updating KNA1 table?
Give the steps.
Thanks in advance
rk

Hi KR,
Why don't u use BDC to run XD02.
With Regards,
Zafar Ali

Problem while filling the Setup Table for the DS 2LIS_02_SCL.

Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.

Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

Define the Characteristics of the validity table for non-cumulatives

Hi Friends,
Here I am designing MultiProvider ( ZCA_M01), based on the Two Business content info cubes (0IC_C03 & 0SD_C03 ) & one customized info cube (ZPUR_C01).
I done Identification for char & keyfigures also.
When i trying to activating the Multiprovider, here i am getting the error , error message is : Define the Characteristics of the validity table for non-cumulatives.
Even here I am attaching the error message help also.
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.
Please take as a high priority.
Thanks & Regards,
Vanarasi Venkat.

Hi Venkat,
If you want to include 0IC_C03 cube in your multi provider the you must make sure that the time characterestics ( 0CALDAY, 0CALMONTH ....) are present in all of the other info providers which you are including in the MP. The Time char to choose depends upon the Inventory cube in which you have mentioned during the definition. As you are using the standard cube 0IC_C03 it has the time char as 0CALDAY. Try to include this in all the other info providers and dont include more tha one Non-cumulative in the MP.
Try this and see if it helps....

How does the MDKP table gets updates

Dear PP Guru's,
I am new to SAP PP,
We have a query that how does the MDKP table gets updates,
Some time If we create new material by coping the material which is showing in table MDKP,
But new material is not showing in table MDKP,
Based on table MDKP we are fetching some data, due to above problem we are not able to fetch the data for some materials,
Please suggest what could be the reason,
Any help will be highly appreciated,
Thanks in advance,
Sachin.

Thanks Thaila,
I have checked the same by doing MRP through MD02 & the entry is getting update in MDKP,
But for some of our materials MRP (MD02) is done earlier, but these materials are not showing in MDKP,
Please suggest, when the entries in MDKP are removed, are there any conditions for removing the entries from MDKP.
please pour some light on the issue,
Thanks once again,
Sachin.

Problem in filling up the setup tables for 2LIS_11_VAHDR (All SD Data sources)

Hello All,
I have been trying to fillup the setup tables for SD datasources( Application-11 Ex:2LIS_11_VAHDR), but it was not allowing me to do that.
Below are the steps i have followed,
1.Deleted the setup tables using tcode-LBWG- Application-11
2.Cleared the queues in RSA7 and found 0 queues for 2LIS_11_VAHDR D.S by triggereing the I.P till it get zeroes.
3.Checked the data in RSA3-No data found.
4.Filling the setup tables using OLI7BW t-code, got a popu(Data for 2LIS_11_VAHDR has to still transfered)
Do i need clear all the queues for SD-Billings,Orders e.t.c since i have 8 data sources to be cleared apart from 2LIS_11_VAHDR .
Could you please suggest any other option to fillup the setup tables.
Regards,
Siva

Did you run the infopackage twice pertaining to 2lis_11_vahdr.One for delta and another time for repeat delta.As delta queue will hold the records in repeat delta mode as well.
Also in case of Direct Delta --Data is transferred to Base tables and delta queue (RSA7) at the same time.So extraction queue (LBWG )and update tables(SM13) does not come into the picture.
Regards,
AL

Lock table for update in adf

dear all ,
am using Jdeveloper 11.1.1.3 with oracle database 10g,
now what i need to do is when inserting a new row in one of my entities i need to lock the entire database table until the commit happen...
i'll explain to u why I need to do this,,, let say that the table x contains the following columns
x_pk number, ( which is the primary key )
x_serial number,
x_type varchar2 );
now am getting x_pk from a sequence on a database so its not a problem,
but for x_serial it needs to be serialized per x_type , now in oracle forms developer i used to do the following in per-insert trigger on the block level-->
lock table for update then selecting the max serial per the type then use it for setting the :x_serial that is in the same block...
now in ADF , i should do this in the do_dml when the operation==DML_INSERT but am not sure what to write and if it will be working same as it was in the form developer
thanks ,
Lama

Delta,
I wrote a [url http://stegemanoracle.wordpress.com/2006/03/15/using-updatable-views-with-adf/]blog post some time ago for an earlier version of JDeveloper that implemented some custom locking behaviour for EOs - perhaps you can adapt the technique there to your needs?
John

Adjusting the SID table for master data infoobject

Hai
Im trying to activate one master data infoobject. But it says the error like below
<b>The SID Table /BI0/SBBP_DELREF must be converted incompatibly with an activation of characteristic 0BBP_DELREF (changes to the key in the table). Table /BI0/SBBP_DELREF contains data. Parts of this data were lost in the conversion</b>.
or
<b>Undo the changes that led to the incompatible conversion (the changes in the key) or delete all data from table /BI0/SBBP_DELREF.</b>
So how can i adjust the SID table for this .
pls tell me
kumar

Hi,
you'll have to delete ALL the master data for this IObj. Therfore you'll have to
delete all data in ALL the IObjs using 0BBP_DELREF (ODS, CUbes and characteristics).
Then activate your IObj. You will go through some step which I explained in the
following thread
Re: Urgent...Company Code lenght has been changed
Extract:
1. Delete 0COMP_CODE master data.
- get objects list using 0COMP_CODE with loaded data: I suggest to delete
master data via AWB (right click the characteristic). If it can't be deleted because
it is used display the deletion log (via AWB or tx SLG1 / RSDMD, MD_DEL).
- delete loaded data for the list above.
This should not be too much since you are in DEV.
2. change 0COMP_CODE length
- change the length to 4;
*- Activate your IObj. You'll get a popup log, validate. Activate despite warning and
errors. You will get An error message, validate.
You should get an horizontal pane with the activation log. Read it for your personal culture but if you don't have time then don't...
- Next the system will prompt to convert the tables: answer YES. The system will ask to schedule the table conv. in the background, go4it.
- next is the SE14 screen for the P table: Hit Activate and adjust (Direct
execution, or in the back as you wish). Answer yes to the mass processing
question and yes (again) for request adjust online. Your table should be converted successfully.
- go back twice from this screen (leaving SE14 tx and return to RSD1). reread the update log if you wish.
- repeat from the *- above... it will perform the very same for all other P tables of IObj using 0COMP_CODE and the 0COMP_CODE S table.
Your IObj is reactivated again. So should your ODS/DSO objects (check activate for example). Cube didn't need to convert tables since the MDID is note posted in any table of a cube.
Please note that once your IObj is in revised version you can perform the same via the menu extras / database table / convert all (see my previous post).
Now you have to evaluate the task. Of course that is a work to fix the mistake.
Depending on when it has be changed it may be worth to restore your DEV sys with a backup (loose work performed from the backup until now).
hope this helps... otherwise, revert.
Olivier.

"All of the Playlists Selected for Updating No Longer Exist"

My family has 2 ipod shuffles. After purchasing a Nano recently, I inserted the cd that came with it. Apparently the existing iTunes software was removed and reinstalled. At any rate, the library still shows all the original songs, but when the Nano is plugged in, iTunes immediately gives a prompt stating "Songs on the iPod *** cannot be updated because all of the playlists selected for updating no longer exist." The library is there, the playlists that were there are there, and I can play the songs on my cpu. Is there anything I can do besides completely uninstalling everything and starting over?
iPod Nano Windows XP Pro

This user tip should help you sort out your missing playlist problem: Hudgie - iPod cannot sync because one or more playlists are missing

I accidently deleted the playlist selected for updating thing...

i was adding new songs to my ipod and i guess there were too many songs there so it asked me if i wanted it to choose some songs randomly...
so i chose "ok" but actually i didnt really want it to choose songs on its own so i deleted the list that was automatically created by itself and decided to delete some songs on my own...
after doin that, i tried to update it but now it says i cant do it because i deleted that list...
it says "songs on the ipod "stephanie kim" cannot be updated because all of the playlists selected for updating no longer exists"
i turned my computer off and tried it again several times but it wont work...
and all the songs in my ipod are gone now...
is there anything i can do?

http://support.apple.com/kb/PH10918
Best.

Wht r the standard tables for vendor customer and sales order report/

Hi wht r the standard tables for vendor and customer reports and is how in normal we cannot use them for vendor reporting and etc ?

Hi
Customer is related to Sales Module
So for a customer we fetch the reports of Sales orders , Deliveries and Billing doc's
CUstomer and Vendor related tables with important fields:
KNA1: Customer Master-General(KUNNR,NAME1,LAND1)
KNB1: Customer Master(Company Code)(KUNNR,BUKRS,PERNR)
KNC1: Customer Master Data (Transaction Figures)(KUNNR,BUKRS,GJAHR)
KNVK: Customer Master Contact Partner(PARNR,KUNNR,NAME1)
KNVV: Customer Master sales data(KUNNR,VKORG,VTWEG,KDGRP)
KNBK: Customer Bank Details(KUNNR,BANKS,BANKL,BANKN)
KNVH: Customer Hierarchy (HITYP,KUNNR,VKORG,VTWEG,SPART)
KNVP: Customer Master Partner Functions(KUNNR,PARVW,KUNN2)
KNVS: Customer Shipment data(KUNNR,VSTEL,TRANS)
KNVI: Customer Tax data(KUNNR,ALAND,TATYP)
LFA1: Vendor Master-General (LIFNR,NAME1,ORT01)
LFB1: Vendor Master(Company Code)(LIFNR,BUKRS,PERNR)
LFC1: Vendor Master (Transaction Figures)(LIFNR,BUKRS,GJAHR)
Sales related Tables for a customer
VBAK: Sales Document(Header Data) (VBELN, KUNNR)
VBAP: Sales Document(Item Data) (VBELN,POSNR,MATNR,ARKTX,CHARG)
      Enquiry, Quotation, Sales Order are differentiated based on Doc.
      Type(VBTYP field) in VBAK,VBAP Tables( for Enquiry VBTYP = A,
      for Quotation 'B' & for Order it is 'C'.)
LIKP: Delivery Table (Header Data)(VBELN,LFART,KUNNR,WADAT,INCO1)
LIPS: Delivery Table (Item Data)(VBELN,POSNR,WERKS,LGORT,MATNR,VGBEL)
      (LIPS-VGBEL = VBAK-VBELN, LIPS-VGPOS = VBAP-POSNR)
VTTK: Shipment Table (Header Data)(TKNUM)
VTTP: Shipment Table (Item Data)( TKNUM,TPNUM,VBELN)
      (VTTP-VBELN = LIKP-VBELN)
VTFA: Shipping Document Flow(TKNUM,VBELV,VBELN)
VTPA: Shipping Partners data(VBELN,PARVW,KUNNR,PERNR)
VTTS: Stages in Shipment(TKNUM,TSNUM,TSTYP)
VTSP: Transport Stage/Shipment Item Allocation(TKNUM,TSNUM,TPNUM)
VEKP: Handling Unit: Header(Packing)(VENUM,VSTEL)
VEPO: Handling Unit: Item (Packing)(VENUM,VEPOS,VBELN)
VBRK: Billing Table(Header Data)(VBELN,FKART,BELNR)
VBRP: Billing Table(Item Data)(VBELN,POSNR,FKIMG,NETWR,VGBEL,VGPOS)
      (VBRP-AUBEL = VBAK-VBELN, VBRP-VGBEL = LIKP-VBELN)
      Apart from these tables there are lot of other tables which starts with
      V, but we use the following tables frequently.
VBUK: All Sales Documents status & Admn. Data(Header)(VBELN,VBTYP)
      VBTYP= C(Sales Order) VBTYP=J(Delivery) VBTYP=M(Invoice)
VBUP: Sales Documents status & Admn. Data(Item)(VBELN,POSNR)
VBEP: Sales Doc. Schedule Lines Data(VBELN,POSNR,EDATU,WMENG)
VBKD: To get sales related Business data like Payment terms etc.(VBELN,ZTERM)
VBFA: sales document flow data(VBELV,VBELN,POSNV,VBTYP)
VBPA: Partner functions Data(VBELN,PARVW,KUNNR,LIFNR)
VEDA: Contract Data(VBELN,VPOSN)
VEDAPO: Contract Data(VBELN,VPOSN)
Vendor related MM tables
EBAN-- Pur.Reqn. Data (BANFN,BNFPO,BADAT,MATNR)
EBKN-- Purchase Requisition Account Assignment(BANFN,BNFPO,VBELN)
EINA- Purchase Info.Record (General Data)(INFNR,MATNR,LIFNR)
EINE-- Purchase Info.Record (Pur.Orgn Data )(INFNR,EKORG)
ELBK-- Vendor Evaluation Header Data(LIFNR,EKORG,KLASS)
EKKO-- Purchase Order Data (Header)(EBELN,BSTYP,BSART)
EKPO-- Purchase Order Data (Item)(EBELN,EBELP,MATNR)
       RFQ and PO are differentiated by Doc Type(BSTYP)in EKKO table.
       For RFQ it is A and for PO it is F.
MKPF-- GRN Data (Header) (EBELN,BLDAT,BUDAT,XBLNR,BKTXT)
MSEG-- GRN Data (Item)(MBLNR,BWART,LIFNR,MATNR,EBELN)
       Apart from this there are lot of tables which begin with 'M'& 'E', but we
       use the following very often.
EKBE--PO History Data (EBELN,EBELP,BELNR,BLDAT,MATNR,VGABE)
EKBZ--PO History with delivery Costs(EBELN,BELNR,LIFNR,XBLNR)
EKET--Schedule lines data of a PO (EBELN,EINDT,SLFDT)
EKES--Vendor Confirmations Data(EBELN,EBTYP,EINDT,XBLNR)
Reward points if useful
Regards
Anji

How to find the Check table for a field ?

Hello All,
        I have the filed name f1.
Now I want to know the check table of this field programatically and if this field has a configuration table then I need that table also.
eg: if werks is the field the Master         Table is : MARC
                                and Configuration Table is : T001W.
Is this possible first of all programatically ?
If yes can anyone help me out ?
Regards,
Deepu.K

Hi again,
1. I don't know the master table for the field werks
A field is never independent. It is always linked to a table,
otherwise the information is only half.
2. So incase if we do not know the tablename,
   its best to query the table DD03L with WERKS,
and filer out CHECKTABLE with *,
and take any one record.
regards,
amit m.

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

I have a problem with my ipad when choosing software update it is continously loading the message checking for updates without showing any results

Hello SuzMiller
Check out the article for the troubleshooting steps for issues with email on your iPhone and iPad.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Number of entries in the internal table for perticular field value

hi All,
Is this possible to get the count of records from the internal table for a perticular field value.
currently my requirement is to get the entries from the internal table which does not have two records for perticular field value (say a = 123) whose status is active (say b = 'X').
also suggets should use LOOP or DELETE or DESCRIBE for a internal table to ful fill this requirement.
Thanks in advance.
Pradeep

Try like this..
Create another table itab2 with same structure as itab1 & move the contents of itab1 to itab2
ITAB2[] = ITAB1[].
Then delete entries from itab2
Delete itab2 whete a = '123' and b = 'X'
Then use Describe statement to get the no of entries
Describe table itab2 lines v_lines.
Hope this helps...

Update my app. What is the correct procedure for updating an app/folio?

I designed a folio in Indesign CS6 and created an app of the folio in adobe dps and succesfully uploaded it to the app store. Now I want to update my app. What is the correct procedure for updating an app/folio?

no, just update your content and recreate the Single Edition App. Your certificate should still be valid so there is not need to recreate these.
... your App ID absolutely need to be the exact same one you used for the first version if you want to make sure this is an update.

INV_INSPECTION_FLAG_ERR in the mtl_interface_errors table for UPDATE

Similar Messages

Maybe you are looking for