Invalid 169.* IP Address (DHCP error)

Hi,
At my company we have a 3com wireless and I can connect but I cannot get a valid ip address. I have already tried that:
- Reset networking settings.
- ifconfig en0 (down/up)
- changing the MTU to 1400
- reboot the iPhone
- DHCP and Static IP (valid one)
My wireless is channel 6, ap mode 2 and WEP.
If I go to other places ( house, restaurants etc) I can easily connect!
Tks for any idea.
Regards,
Fernando

As you no doubt know, 169.* is a self-assigned address when DHCP doesn't work.
I haven't found any good way around that, but I'm replying to at least sympathize.
1) Rebooting the company router might work.
2) If you meant a static IP also failed to connect, that sounds more like a passcode mismatch or something. Is it a secured network?
Luck!

Similar Messages

Cannot start iChat with friend - receive error "Invalid remote IP address"

I'm having trouble connecting to iChat with friend. We are both using AIM accounts and click on connect. The other person accepts the invitation and iChat tries to connect. It fails and I receive the error message, "invalid remote IP address". I'm am using Mac OS X Tiger while my friend has Leopard. Does that make a difference? I appreciate any feedback.

The Leopard end should make sure that in System Preferences > Sharing has Internet Sharing Off.
Also they should not be connected to the Internet twice such as Wifi and Ethernet to the same router.
Using Parallels in Leopard causes a similar issue.
In this case turn Off the two VPNs in System Preferences > Network (and set Parallels itself to get it's Own IP and not share the Mac's)
Some MIMO modem or Wifi routers can cause this.
Get a new modem or router is the simple answer to that one.
11:24 PM Monday; August 11, 2008

Invalid server IP address for Remote Panels under LV 8.0.1

The other messages for troubleshooting the "invalid server IP address" were very helpful with getting my EXE to operate as a remote panel. But there is still one issue that I cannot resolve that seems to be caused by the 8.0.1 upgrade.
The remote panel work perfectly using IE6 on a computer that has the LV 8.0.1 FDS or PDS installed. When I use a computer that has LV 7.1 or no LV at all, the invalid server IP address appears inside the border of where the VI should appear on the HTML page. The connection to the remote computer is correct, the HTML file is delivered by the web server in LV, but the panel part of the page returns the error.
Does the part of the HTML that loads the Run Time Engine need to be updated for 8.0.1? Will the LV 8.0 RTE work for a remote panel on an EXE compiled for LV 8.0.1?
The code is:
var obj = '<OBJECT ID="LabVIEWControl" CLASSID="CLSID:A40B0AD4-B50E-4E58-8A1D-8544233807AD" WIDTH=1216 HEIGHT=915 CODEBASE="ftp://ftp.ni.com/support/labview/runtime/windows/8.0';
if (lng.indexOf("fr") != -1) { obj = obj + '/French'; }
else if (lng.indexOf("de") != -1) { obj = obj + '/German'; }
else if (lng.indexOf("ja") != -1) { obj = obj + '/Japanese'; }
obj = obj + '/LVRunTimeEng.exe">';
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

Thanks for the suggestion, Tunde. After further experimentation, it seems that 8.0.1 was not the problem. I worked perfectly when I removed the <parameter server=... > line that I added manually.
Michael Munroe, ABCDEF
Certified LabVIEW Developer, MCP
Find and fix bad VI Properties with Property Inspector

HP Officejet Pro 8500A e-All-in-One Printer - A910a keeps getting assigned 169. ip address

Im currently using a ubee wireless router
my OS is Windows 7 home premium 64 bit
My printer is able to connect to my router however it is assiged a 169 ip address, therefore my computer is unable to connect to the printer. Before I was even able to connect my printer to the network I had to disable my mac filtering on my router settings because my printer told me to do so on a wireless test report, but its been an ongoing issue where if its not the IP address its something wrong with the MAC filtering. I feel like im going in circles. Please HELP!!

No it is not connecting to your router as the printer has an invalid IP. What procedure are you following in the manual and the support HP web site to get connected??
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Address list error -- 5.7.1 Relaying not allowed

Hi,
We have setup the Java Messaging Server to send/recieve mails from a gateway. The inbound mail flow works perfectly but, the outbound mail flow has issues.
The outbound mails are not hitting the gateway. When checked the log for outbound mail, it displays the address list error - 5.7.1 Relaying not allowed for any domain i.e gmail.com, etc
version:
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS P1192FLPLN 5.9 Generic_118558-02 sun4u sparc SUNW,Sun-Fire
here is the log for reference...
=========================================================================
root@P1192FLPLN # /opt/SUNWmsgsr/sbin/imsimta test -rewrite -debug -source_channel=tcp_local [email protected] [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
17:09:37.43: Debug output enabled, system P1192FLPLN.extmail.xyz.com, process 3fbf.1, message enqueue routines version V6.3 compiled Oct 12 2007 17:15:38
17:09:37.43: mmc_winit('tcp_local','[email protected]','') called.
17:09:37.43: Address reversal invoked on [email protected], force reverse URL 1, capture 1
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.43: Rewrite: "$*", position 0, hash table -
17:09:37.43:   Found: "$A$E$F$U%[email protected]"
17:09:37.43:   Rewrite failed, not forward.
17:09:37.43: Rewrite: "$*", position 1, hash table -
17:09:37.43:   Failed.
17:09:37.43: Rewrite: "$*", position 0, rewrite database -
17:09:37.43:   Failed
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.43: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.43:   Found: "$U%[email protected]"
17:09:37.43:   New mailbox: "abhishek.sen".
17:09:37.43:   New host: "extmail.xyz.com".
17:09:37.43:   New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.43:   New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.43:   - found on channel l
17:09:37.43: Routelocal flag set; scanning for % and !
17:09:37.43:   Checking reverse URL cache for: [email protected]
17:09:37.43:   Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.48:   Resulting URL: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: mmc_open_url called to open ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
17:09:37.49:   URL with quotes stripped: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49:   LDAP URL identified
17:09:37.49: URL context #1 will be used
17:09:37.49:   Performing URL search on: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.53: mmc_read_url result: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53:   URL resolution returned: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: mmc_read_url result: [preferredlanguage] en
17:09:37.53:   URL resolution returned: [preferredlanguage] en
17:09:37.53:       Attribute index: 0
17:09:37.53:       LDAP URL produced preferred language en
17:09:37.53: mmc_read_url result: [mailmsgmaxblocks] 700
17:09:37.53:   URL resolution returned: [mailmsgmaxblocks] 700
17:09:37.53:       Attribute index: 0
17:09:37.53:       LDAP URL produced blocklimit 700
17:09:37.53: mmc_read_url result: [mail] [email protected]
17:09:37.53:   URL resolution returned: [mail] [email protected]
17:09:37.54:       Attribute index: 0
17:09:37.54:       LDAP URL produced address [email protected]
17:09:37.54:   No more results to return
17:09:37.54:     Override postmaster: [email protected]
17:09:37.54:     Preferred language en
17:09:37.54:     Content return block limit now 700
17:09:37.54:   Mapped return address: [email protected]
17:09:37.54:   from_access mapping check: ||MAIL|tcp_local|[email protected]|
17:09:37.54: Queue area size 73232902, temp area size 2067314
17:09:37.54:   18308225 blocks of effective free queue space available; setting disk limit accordingly.
17:09:37.54:   1033657 blocks of free temporary space available; setting disk limit accordingly.
17:09:37.54:       - passed.
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.54: Rewrite: "$*", position 0, hash table -
17:09:37.54:   Found: "$A$E$F$U%[email protected]"
17:09:37.54:   Rewrite failed, not forward.
17:09:37.54: Rewrite: "$*", position 1, hash table -
17:09:37.54:   Failed.
17:09:37.54: Rewrite: "$*", position 0, rewrite database -
17:09:37.54:   Failed
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.54: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.54:   Found: "$U%[email protected]"
17:09:37.54:   New mailbox: "abhishek.sen".
17:09:37.54:   New host: "extmail.xyz.com".
17:09:37.54:   New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.56:   New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.56:   - found on channel l
17:09:37.56: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
17:09:37.56: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.56: Rewrite: "$*", position 0, hash table -
17:09:37.56:   Found: "$A$E$F$U%[email protected]"
17:09:37.57:   Rewrite failed, not envelope.
17:09:37.57: Rewrite: "$*", position 1, hash table -
17:09:37.57:   Failed.
17:09:37.57: Rewrite: "$*", position 0, rewrite database -
17:09:37.57:   Failed
17:09:37.57: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.57: Rewrite: "xyz.com", position 0, hash table -
17:09:37.57:   Failed.
17:09:37.57: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.59:   Failed
17:09:37.59: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.59: Rewrite: "*.com", position 0, hash table -
17:09:37.59:   Failed
17:09:37.59: Rewrite: ".com", position 0, hash table -
17:09:37.59:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.59:   New mailbox: "bhanu.prasad".
17:09:37.59:   New host: "xyz.com".
17:09:37.59:   New route: "TCP-DAEMON".
17:09:37.59:   New channel system: "TCP-DAEMON".
17:09:37.59: Looking up host "TCP-DAEMON".
17:09:37.60:   - found on channel tcp_local
17:09:37.60: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.60: Rewrite: "$*", position 0, hash table -
17:09:37.60:   Found: "$A$E$F$U%[email protected]"
17:09:37.60:   Rewrite failed, not envelope.
17:09:37.60: Rewrite: "$*", position 1, hash table -
17:09:37.60:   Failed.
17:09:37.60: Rewrite: "$*", position 0, rewrite database -
17:09:37.60:   Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.61: Rewrite: "xyz.com", position 0, hash table -
17:09:37.61:   Failed.
17:09:37.61: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.61:   Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.61: Rewrite: "*.com", position 0, hash table -
17:09:37.61:   Failed
17:09:37.61: Rewrite: ".com", position 0, hash table -
17:09:37.63:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.63:   New mailbox: "bhanu.prasad".
17:09:37.63:   New host: "xyz.com".
17:09:37.63:   New route: "TCP-DAEMON".
17:09:37.63:   New channel system: "TCP-DAEMON".
17:09:37.63: Looking up host "TCP-DAEMON".
17:09:37.63:   - found on channel tcp_local
17:09:37.63:   Rewrite rules result: [email protected]
17:09:37.63:   Checking reverse URL cache for: [email protected]
17:09:37.63:   Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.65:   URL generation failed, status = 0
*** Debug output from rewriting a forward envelope address:
17:09:37.65: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.65: Rewrite: "$*", position 0, hash table -
17:09:37.65:   Found: "$A$E$F$U%[email protected]"
17:09:37.65:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.65:     old state = not checked.
17:09:37.65:     Domain check on xyz.com.
17:09:37.66:     Could not add domain result 0 to cache for xyz.com.
17:09:37.66:     new state = fail pending.
17:09:37.66:   Rewrite failed due to prechannel mismatch.
17:09:37.66: Rewrite: "$*", position 1, hash table -
17:09:37.66:   Failed.
17:09:37.66: Rewrite: "$*", position 0, rewrite database -
17:09:37.66:   Failed
17:09:37.66: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.66: Rewrite: "xyz.com", position 0, hash table -
17:09:37.66:   Failed.
17:09:37.67: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.67:   Failed
17:09:37.67: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.67: Rewrite: "*.com", position 0, hash table -
17:09:37.67:   Failed
17:09:37.67: Rewrite: ".com", position 0, hash table -
17:09:37.67:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.67:   New mailbox: "bhanu.prasad".
17:09:37.67:   New host: "xyz.com".
17:09:37.67:   New route: "TCP-DAEMON".
17:09:37.69:   New channel system: "TCP-DAEMON".
17:09:37.69: Looking up host "TCP-DAEMON".
17:09:37.69:   - found on channel tcp_local
address channel        = tcp_local
forward channel        = tcp_local
channel description    =
channel caption        =
channel user filter    =
dest channel filter    =
source channel filter =
channel flags #0       = BIDIRECTIONAL SINGLE_SYSTEM IMMNONURGENT NOSERVICEALL channel flags #1       = SMTP_CRLF MX IDENTNONENUMERIC DEFAULT
channel flags #2       = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3       = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4       = EIGHTNEGOTIATE HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5       = TRUNCATESMTPLONGLINES
channel flags #6       = LOCALUSER REPORTNOTARY
channel flags #7       = SWITCHCHANNEL REMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8       = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9       = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALNONE NOTURN
defaulthost            = extmail.xyz.com extmail.xyz.com
linelength             = 998
addrsperfile           = 99
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = tcp-daemon
channel queue 0 name   = SMTP_POOL
channel queue 1 name   = SMTP_POOL
channel queue 2 name   = SMTP_POOL
channel queue 3 name   = SMTP_POOL
channel after params    =
channel daemon name    = 10.8.51.126
channel user name      =
urgentnotices          = 1 2 4 7
normalnotices          = 1 2 4 7
nonurgentnotices       = 1 2 4 7
channel rightslist ids =
local behavior flags   = %x0
expandchannel          =
notificationchannel    =
dispositionchannel     =
tlsswitchchannel       =
backward channel       = tcp_local
unique identifier      = [email protected]
header forward address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
envelope rev address   = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
name                   =
mbox                   = bhanu.prasad
Extracted address action list:
    [email protected]
Extracted 733 address action list:
    [email protected]
Address list expansion:
*** Debug output from alias expansion:
17:09:37.76: Inner expand, level = 0, mailbox = [email protected]
17:09:37.76: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.76: Rewrite: "$*", position 0, hash table -
17:09:37.76:   Found: "$A$E$F$U%[email protected]"
17:09:37.76:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.76:     old state = not checked.
17:09:37.76:     Domain check on xyz.com.
17:09:37.77:     Could not add domain result 0 to cache for xyz.com.
17:09:37.77:     new state = fail pending.
17:09:37.77:   Rewrite failed due to prechannel mismatch.
17:09:37.77: Rewrite: "$*", position 1, hash table -
17:09:37.77:   Failed.
17:09:37.77: Rewrite: "$*", position 0, rewrite database -
17:09:37.77:   Failed
17:09:37.77: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.77: Rewrite: "xyz.com", position 0, hash table -
17:09:37.77:   Failed.
17:09:37.79: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.79:   Failed
17:09:37.79: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.79: Rewrite: "*.com", position 0, hash table -
17:09:37.79:   Failed
17:09:37.79: Rewrite: ".com", position 0, hash table -
17:09:37.79:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.79:   New mailbox: "bhanu.prasad".
17:09:37.79:   New host: "xyz.com".
17:09:37.79:   New route: "TCP-DAEMON".
17:09:37.80:   New channel system: "TCP-DAEMON".
17:09:37.80: Looking up host "TCP-DAEMON".
17:09:37.80:   - found on channel tcp_local
-13 expansion total.
*** Debug output from submitting an envelope address:
17:09:37.80: mmc_wadr(0x0017ae68,'[email protected]','[email protected]') called.
17:09:37.80: Copy estimate before address addition is 1
17:09:37.80:     Parsing address [email protected]
17:09:37.80: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.80: Rewrite: "$*", position 0, hash table -
17:09:37.81:   Found: "$A$E$F$U%[email protected]"
17:09:37.81:   Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.81:     old state = not checked.
17:09:37.81:     Domain check on xyz.com.
17:09:37.81:     Could not add domain result 0 to cache for xyz.com.
17:09:37.81:     new state = fail pending.
17:09:37.81:   Rewrite failed due to prechannel mismatch.
17:09:37.81: Rewrite: "$*", position 1, hash table -
17:09:37.83:   Failed.
17:09:37.83: Rewrite: "$*", position 0, rewrite database -
17:09:37.83:   Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
xyz.com", literal = "", tag = ""
17:09:37.83: Rewrite: "xyz.com", position 0, hash table -
17:09:37.83:   Failed.
17:09:37.83: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.83:   Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
.com", literal = "", tag = ""
17:09:37.83: Rewrite: "*.com", position 0, hash table -
17:09:37.84:   Failed
17:09:37.84: Rewrite: ".com", position 0, hash table -
17:09:37.84:   Found: "$U%$H$D@TCP-DAEMON"
17:09:37.84:   New mailbox: "bhanu.prasad".
17:09:37.84:   New host: "xyz.com".
17:09:37.84:   New route: "TCP-DAEMON".
17:09:37.84:   New channel system: "TCP-DAEMON".
17:09:37.84: Looking up host "TCP-DAEMON".
17:09:37.84:   - found on channel tcp_local
17:09:37.84:       - adding address [email protected] to headers.
17:09:37.86:       - orig_send_access mapping check: tcp_local|abhishek.sen@extm
ail.xyz.com|tcp_local|[email protected]
17:09:38.16:         - failed.
17:09:38.16: Good address count 0 defer count 0
17:09:38.16: Copy estimate after address addition is 1
17:09:38.16: mmc_waend(0x0017ae68) called.
17:09:38.16:   Copy estimate is 1
17:09:38.16:   Queue area size 73232902, temp area size 2067288
17:09:38.16:   36616451 blocks of effective free queue space available; setting
disk limit accordingly.
17:09:38.16:   1033644 blocks of free temporary space available; setting disk li
mit accordingly.
Expanded address:
[email protected]
Submitted address list:
Address list error -- 5.7.1 Relaying not allowed: [email protected]
Submitted notifications list:
=========================================================================Do we have to make any changes on other config files except the imta.cnf and mappings file for inbound and outbound..
thanks for any help
Edited by: prasad0_0 on Jul 8, 2008 4:58 AM

i have already setup the messaging server 6 months back.. followed the same procedure to route mails to a gateway..
made changes to the imta.cnf for outbound mail flow to the tcp_local and mappings file to accept inbound mail flow from the gateway. Its working perfectly on the older setup, but this now, have issues with new setup.
here is the imta.cnf file..
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
! Rules to select local users
$* $A$E$F$U%[email protected]
P1192FLPLN.extmail.xyz.com $U%[email protected]
extmail.xyz.com $U%[email protected]
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.extmail.xyz.com $U%$H.extmail.xyz.com@tcp_intranet-daemon
* $U%$&0.extmail.xyz.com
! reprocess
reprocess $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
reprocess.P1192FLPLN.extmail.xyz.com $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
! process
process $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
process.P1192FLPLN.extmail.xyz.com $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
! defragment
defragment $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
defragment.P1192FLPLN.extmail.xyz.com $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
! conversion
conversion $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
conversion.P1192FLPLN.extmail.xyz.com $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
! bitbucket
bitbucket $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
bitbucket.P1192FLPLN.extmail.xyz.com $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 logging defaulthost extmail.xyz.com extmail.xyz.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7
P1192FLPLN.extmail.xyz.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck daemon 10.8.51.126
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver deliveryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp flagtransfer
!tcp_lmtpss-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcs-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold
hold-daemonand mappings file..
! MTA mappings file
! for access control and other table lookups
FROM_ACCESS
! Entries to block certain submissions normally would be inserted here,
! above the ntended-to-be-final entries that while permitting submission,
! merely disable any potential "vacation" effect.
! The following entries disable Sieve "vacation" action on lists sorts
! of addresses, as recommended by the Sieve "vacation" extension draft.
   *|SMTP*|*|*|MAILER-DAEMON@*|*    $!$Y
   *|SMTP*|*|*|LISTSERVE*@|*        $!$Y
   *|SMTP*|*|*|majordomo@*|*        $!$Y
   *|SMTP*|*|*|*-request@*|*        $!$Y
   *|SMTP*|*|*|*-owner@*|*          $!$Y
   *|SMTP*|*|*|owner-*@*|*          $!$Y
PORT_ACCESS
*|*|*|*|* $C$|INTERNAL_IP;$3|$Y$E
* $YEXTERNAL
INTERNAL_IP
$(10.8.55.49/24) $Y
$(10.8.51.125) $Y
$(10.8.51.126) $Y
127.0.0.1 $Y
* $N
ORIG_SEND_ACCESS
tcp_local|*|tcp_local|* $N$D30|Relaying$ not$ allowed
tcp_*|*|native|* $N
tcp_*|*|hold|* $N
tcp_*|*|pipe|* $N
tcp_*|*|ims-ms|* $N
! Block "external" submissions of explicitly source-routed "internal" addresses
tcp_local|*|tcp_intranet|@*:*.*   $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*$%*@*   $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*.*!*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|"*@*"@* $N$D30|Explicit$ routing$ not$ allowed
SEND_ACCESS
tcp_*|*|*|*@[127.*] $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@localhost.* $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.com $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.net $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.org $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.test $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.example $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.invalid $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.localhost $X5.1.2|$NBad$ destination$ system
<IMTA_TABLE:mappings.localewe are able to receive mails from the gateway, but when using uwc to send the mail, the mail doesnt hit the gateway. trying a telnet from the messaging server to the gateway, works perfectly.
thanks in advance.

Terminated by signal SIGSEGV (Address boundary error)

Hi,
I was doing a bit of multitasking, and the kernel ran out of SWAP and crashed. After reboot everything is borked. Every program I had open prior to crash wont start or crashes soon after opening. (Chromium, Clementine, Terminal, Smuxi, VMware...). The error is either segmentation fault or some weird error.
Smuxi:
Stack overflow: IP: 0x7f0d476380ff, fault addr: (nil)
Stacktrace:
at <unknown> <0xffffffff>
at Gtk.Application.Run () [0x00001] in /build/gtk-sharp-2/src/gtk-sharp-2.12.22/gtk/Application.cs:135
<...>
at Smuxi.Frontend.Gnome.Frontend.Init (string[]) [0x00239] in /build/smuxi/src/smuxi-0.11/src/Frontend-GNOME/Frontend.cs:281
at Smuxi.Frontend.Gnome.MainClass.Main (string[]) [0x000b2] in /build/smuxi/src/smuxi-0.11/src/Frontend-GNOME/Main.cs:75
at (wrapper runtime-invoke) <Module>.runtime_invoke_void_object (object,intptr,intptr,intptr) <IL 0x00050, 0xffffffff>
~ % chromium
[7585:7610:0606/150214:ERROR:nss_util.cc(853)] After loading Root Certs, loaded==false: NSS error code: -8018
[7585:7585:0606/150214:ERROR:component_loader.cc(138)] Failed to parse extension manifest.
[7585:7585:0606/150214:ERROR:background_mode_manager_aura.cc(14)] Not implemented reached in virtual void BackgroundModeManager::EnableLaunchOnStartup(bool)
fish: Job 1, “chromium” terminated by signal SIGSEGV (Address boundary error)
~ % lxterminal
fish: Job 1, “lxterminal ” terminated by signal SIGSEGV (Address boundary error)
~ % clementine
14:44:49.823 WARN unknown libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
14:44:50.217 WARN unknown libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
14:54:12.230 WARN unknown QTimeLine::start: already running
14:54:13.089 WARN unknown QTimeLine::start: already running
14:54:13.434 WARN unknown QTimeLine::start: already running
14:54:13.737 WARN unknown QTimeLine::start: already running
14:54:14.378 WARN unknown QTimeLine::start: already running
14:54:14.686 WARN unknown QTimeLine::start: already running
14:54:15.050 WARN unknown QTimeLine::start: already running
14:54:15.876 WARN unknown QTimeLine::start: already running
14:54:16.152 WARN unknown QTimeLine::start: already running
14:54:16.454 WARN unknown QTimeLine::start: already running
14:54:17.409 WARN unknown QTimeLine::start: already running
14:54:20.256 WARN unknown QTimeLine::start: already running
14:54:22.687 WARN unknown QTimeLine::start: already running
14:54:32.169 WARN unknown QTimeLine::start: already running
14:54:33.489 WARN unknown QTimeLine::start: already running
fish: Job 1, “clementine” terminated by signal SIGSEGV (Address boundary error)
~ % steam
Running Steam on arch 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Installing breakpad exception handler for appid(steam)/version(1401381906_client)
Uploading dump (out-of-process) [proxy '']
/tmp/dumps/assert_20140606150623_1.dmp
/home/jan/.local/share/Steam/steam.sh: line 755: 8003 Segmentation fault (core dumped) $STEAM_DEBUGGER "$STEAMROOT/$PLATFORM/$STEAMEXE" "$@"
What do?
EDIT:
It is also worth mentioning that I've had ran the update earlier today, which may have something to do with this:
[2014-06-06 14:06] [PACMAN] Running 'pacman -Syu'
[2014-06-06 14:06] [PACMAN] synchronizing package lists
[2014-06-06 14:06] [PACMAN] starting full system upgrade
[2014-06-06 14:09] [PACMAN] upgraded libwbclient (4.1.7-1 -> 4.1.8-1)
[2014-06-06 14:09] [PACMAN] upgraded cifs-utils (6.2-1 -> 6.3-1)
[2014-06-06 14:09] [PACMAN] upgraded clutter-gst (2.0.10-2 -> 2.0.12-1)
[2014-06-06 14:09] [PACMAN] upgraded dart (1.4.0-1 -> 1.4.2-1)
[2014-06-06 14:09] [PACMAN] upgraded e2fsprogs (1.42.9-2 -> 1.42.10-1)
[2014-06-06 14:09] [PACMAN] installed libx264 (1:142.20140311-4)
[2014-06-06 14:09] [PACMAN] upgraded x264 (1:142.20140311-1 -> 1:142.20140311-4)
[2014-06-06 14:09] [PACMAN] upgraded ffmpeg (1:2.2.2-3 -> 1:2.2.3-1)
[2014-06-06 14:09] [ALPM] warning: /etc/passwd installed as /etc/passwd.pacnew
[2014-06-06 14:09] [ALPM] warning: /etc/group installed as /etc/group.pacnew
[2014-06-06 14:09] [PACMAN] upgraded filesystem (2013.05-2 -> 2014.05-2)
[2014-06-06 14:09] [PACMAN] upgraded gdk-pixbuf2 (2.30.7-1 -> 2.30.8-1)
[2014-06-06 14:09] [PACMAN] upgraded gedit (3.12.1-1 -> 3.12.2-1)
[2014-06-06 14:09] [PACMAN] upgraded gmime (2.6.20-1 -> 2.6.20-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-calculator (3.12.1-1 -> 3.12.2-1)
[2014-06-06 14:09] [PACMAN] upgraded gnome-icon-theme-symbolic (3.12.0-1 -> 3.12.0-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-icon-theme (3.12.0-1 -> 3.12.0-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-menus (3.10.1-1 -> 3.10.1-2)
[2014-06-06 14:09] [PACMAN] upgraded gnome-tetravex (3.12.2-1 -> 3.12.3-1)
[2014-06-06 14:09] [PACMAN] upgraded gnupg (2.0.22-2 -> 2.0.23-1)
[2014-06-06 14:09] [PACMAN] upgraded graphviz (2.36.0-2 -> 2.36.0-3)
[2014-06-06 14:09] [PACMAN] upgraded gupnp (0.20.11-1 -> 0.20.12-1)
[2014-06-06 14:09] [PACMAN] upgraded perl (5.18.2-2 -> 5.20.0-2)
[2014-06-06 14:09] [PACMAN] upgraded vim-runtime (7.4.307-3 -> 7.4.307-4)
[2014-06-06 14:09] [PACMAN] upgraded openssl (1.0.1.g-1 -> 1.0.1.h-1)
[2014-06-06 14:09] [PACMAN] upgraded python2 (2.7.6-3 -> 2.7.7-1)
[2014-06-06 14:09] [PACMAN] upgraded gvim (7.4.307-3 -> 7.4.307-4)
[2014-06-06 14:09] [PACMAN] upgraded imagemagick (6.8.9.1-2 -> 6.8.9.1-3)
[2014-06-06 14:09] [PACMAN] upgraded python-setuptools (3.6-1 -> 4.0.1-1)
[2014-06-06 14:09] [PACMAN] upgraded ipython (2.0.0-1 -> 2.1.0-1)
[2014-06-06 14:09] [PACMAN] upgraded irssi (0.8.15-8 -> 0.8.16-1)
[2014-06-06 14:09] [PACMAN] upgraded json-glib (1.0.0-1 -> 1.0.2-1)
[2014-06-06 14:09] [PACMAN] upgraded lib32-libdbus (1.8.0-1 -> 1.8.2-1)
[2014-06-06 14:09] [PACMAN] upgraded libsystemd (212-3 -> 213-5)
[2014-06-06 14:09] [PACMAN] upgraded libatasmart (0.19-2 -> 0.19-3)
[2014-06-06 14:09] [PACMAN] upgraded libgdata (0.15.0-1 -> 0.15.1-1)
[2014-06-06 14:09] [PACMAN] upgraded libinput (0.1.0-1 -> 0.2.0-1)
[2014-06-06 14:09] [PACMAN] upgraded libmms (0.6.2-1 -> 0.6.4-1)
[2014-06-06 14:09] [PACMAN] upgraded libproxy (0.4.11-2 -> 0.4.11-3)
[2014-06-06 14:09] [PACMAN] upgraded libpurple (2.10.9-1 -> 2.10.9-2)
[2014-06-06 14:09] [PACMAN] upgraded libxcursor (1.1.14-1 -> 1.1.14-2)
[2014-06-06 14:09] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-06-06 14:09] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Starting build: 3.14.5-1-ARCH
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Starting build: 3.14.5-1-ARCH
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [resume]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
[2014-06-06 14:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-06-06 14:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-06-06 14:10] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-06-06 14:10] [PACMAN] upgraded linux (3.14.4-1 -> 3.14.5-1)
[2014-06-06 14:10] [PACMAN] upgraded linux-headers (3.14.4-1 -> 3.14.5-1)
[2014-06-06 14:10] [PACMAN] upgraded mercurial (3.0-1 -> 3.0.1-1)
[2014-06-06 14:10] [PACMAN] upgraded net-snmp (5.7.2.1-2 -> 5.7.2.1-3)
[2014-06-06 14:10] [PACMAN] upgraded perl-io-tty (1.11-1 -> 1.11-2)
[2014-06-06 14:10] [PACMAN] upgraded perl-xml-parser (2.41-4 -> 2.41-5)
[2014-06-06 14:10] [PACMAN] upgraded postgresql-libs (9.3.4-1 -> 9.3.4-2)
[2014-06-06 14:10] [PACMAN] upgraded postgresql (9.3.4-1 -> 9.3.4-2)
[2014-06-06 14:10] [PACMAN] upgraded python2-setuptools (3.6-1 -> 4.0.1-1)
[2014-06-06 14:10] [ALPM-SCRIPTLET] Redis starts from redis user by default. Check redis.service file
[2014-06-06 14:10] [PACMAN] upgraded redis (2.8.9-1 -> 2.8.10-1)
[2014-06-06 14:10] [PACMAN] upgraded rrdtool (1.4.8-3 -> 1.4.8-4)
[2014-06-06 14:10] [PACMAN] upgraded rygel (0.22.1-1 -> 0.22.2-1)
[2014-06-06 14:10] [PACMAN] upgraded smbclient (4.1.7-1 -> 4.1.8-1)
[2014-06-06 14:10] [PACMAN] upgraded systemd (212-3 -> 213-5)
[2014-06-06 14:10] [PACMAN] upgraded subversion (1.8.9-1 -> 1.8.9-2)
[2014-06-06 14:10] [PACMAN] upgraded systemd-sysvcompat (212-3 -> 213-5)
[2014-06-06 14:10] [PACMAN] upgraded xfconf (4.10.0-3 -> 4.10.0-4)
[2014-06-06 14:10] [PACMAN] upgraded youtube-dl (2014.06.02-1 -> 2014.06.04-1)
Last edited by jan1024188 (2014-06-06 13:54:27)

Try downgrading libxcursor back to 1.1.14-1
There are several posts here about segfaults being caused by the upgrade libxcursor (1.1.14-1 -> 1.1.14-2)
The first few results of a search for libxcursor will give more details.
e.g.
https://bbs.archlinux.org/viewtopic.php?id=182343
https://bbs.archlinux.org/viewtopic.php?id=182464
Last edited by bhrgunatha (2014-06-06 14:16:42)

Photosmart B110a has 169 ip address

My router has given the printer a 169 ip address. I would like to create a static ip because this keeps happening and the printer has become unreliable. I have tried all of the switch off/switch on routines but they do not work.The solution offered for setting static addresses seems reasonable except for the fact that I have a 169 address and so cannot access the interface for changing the ip address.I am using Windows 7.It has become a very circular problem and I cannot seem to get through this no matter where I look. I have been wrestling with this for hours.If anyone could point me in the right direction I would be very grateful.

Hi High1, and a warm welcome to the forums!
The 169.254.x.x addy simply means it's not getting any addy from a DHCP Server at all.
Is the network encrypted? WEP? WPA?
Op[en Internet Connect, click on 802.1x icon, Choose Ethernet for Network Port, fill in info... does that work or give any more clues?
Is it that the Mac is trying to remember a previous location (she sometimes takes it hope and logs on to her home ISP there). If so, how can I delete these previous locations?
If you feel that is the case, Trash these files & reboot...
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
/Library/Preferences/com.apple.networkConfig.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Library/Preferences/SystemConfiguration/com.apple.nat.plist

Invalid I/O node config error while passing project reservations to APO

Guys,
I had created a Project with WBS Element, Network & Internal activity in ECC Project Systems. This data was ciffed and seen in APO without any issue.
Upon creating a Material component, as a reservation, under network activity in PS and releasing it, there is an error in the APO side log(SLG1) as shown below.
Source system: xyz, user: abc transaction:CJ20N function module:/SAPAPO/CIF_PRJ_INBOUND
-----Error start--
New order (warning)
Error in activity of operation 0010 order 4001740(warning)
Invalid I/O node configuration (error)- Message no. /SAPAPO/OM_ERROR258
Diagnosis-The I/O node cannot be scheduled using the value combination specified.
--Error end--
Error while processing project order: 000001234- (error)- Message no. /SAPAPO/PRJ003
------Log Information
The registered objects of the queue are marked as faulty - Message no. /SAPAPO/CIF_ERRHDLG604
CIF error handling activated - Message no. /SAPAPO/CIF_ERRHDLG504
End of processing registered for RFC 00000001 of the LUW with ID xxx
Message no. /SAPAPO/CIF_ERRHDLG605
checked the APO post processing and manaully triggered the transfer of selected order . even then order reservation wasn't pushed to APO.
Would appreciate if any one can provide with info on why this error is being produced and ways to resolve it!!!
Thanks

please check if you have any issues under network activity..if you could not find any please try to debug the failed queue with the help of your Abap counterpart. here is the process
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0d1265d-db32-2b10-79ba-ccf6fe2c161d

"Server either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error driving me nuts!

OK; have been trying to setup a test VM based RDS deployment for a few days now with no luck.
this error mentioned above:
"Server <server name> either does not have a virtual switch configured or none of the configured virtual switches have an IP address assigned" error is driving me nuts!
I have removed and re-added the RD Virtualization Host role numerous times, each time having the "create a virtual switch" checkbox selected, but it did NOT create any virtual switch.
I created the external virtual switch manually and tried to create the desktop collection again, no luck with the same error.
a few questions:
1. you don't assign IP to a switch! you assign IP to Network Interfaces. why does the error puts it like this?! it is technically wrong.(yeah yeah I know all about how you'd assign IP to managed switches in real world to telnet into them and manage them.
you know better than me that it is not the case here!)
2.the RDS Virtualization hosts are using their wifi card as the card for the virtual switch. could that be the reason? I even disabled their unplugged wired NIC just to make sure that the wifi is the only available option for the RDS wizard to use for the
virtual switch creation; but it didn't use it and it didn't create any virtual switch automatically.
3.if WIFI nic is indeed the reason, is it your suspension or an official documents is there somewhere stating so (that the WIFI NICS on a Virtualization hosts are not supported as the hub for a virtual switch).
4.what are the properties of the virtual switch the RDS requires? does it have to be external? why can't it work even with my manually created external switch?
5.how would I fix it?
P.S: the environment is made up of 2 laptops, having windows 2012 R2 trial installed on them, using their wifi to connect to the out world. no cable is plugged into their wired NIC card.

Hi,
Thank you for posting in Windows Server Forum.
The simplest short term solution was to connect each computer to a small switch that had no other connectivity. This brought up the link light on the external NIC and allowed the creation of the collection to complete. You need to use an external switch. You
can create one external switch which might fix the problem.
Please check below article for information.
VDI Deployment Error About Virtual Switch
In addition please referthis article for information regarding virtual switch.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Invalid application discriptor: Unknown namespace error

Hi all I am using flash Builder 4.6. I am working on google eyes project, this was created on flex 3.1 but I am using flash builder so I need to update it's sdk so i update it's sdk to 4.6.0, here I am getting an compilation error. Invalid application discriptor:Unkown namespace error

It seems like you have replaced the folder, /Applications/Adobe\ Flash\ Builder\ 4.7/eclipse/plugins/com.adobe.flash.compiler_4.7.0.349722/AIRSDK
This folder is used when creating an ActionScript project or ActionScript Mobile project. However, for a Flex Project, the SDK used is the same as used to be previously, /Applications/Adobe Flash Builder 4.7/sdks/4.6.0/ in your case. You will either need to use a ActionScript project or overlay the Flex SDK present at /Applications/Adobe Flash Builder 4.7/sdks/4.6.0/ with the AIR SDK you wish to use.
You can find instructions for the same at:
http://helpx.adobe.com/x-productkb/multi/how-overlay-air-sdk-flex-sdk.html
http://helpx.adobe.com/flash-builder/kb/overlay-air-sdk-flash-builder.html

Invalid B-tree node size error & updating OS

I was toying around with the idea of updating my OS to 10.4 and increasing my storage capacity. A welcome upgrade to an old system that has been very good to me....until now.
The short version is that I am experiencing quite a bit of directory damage (for the full story, read below). After researching hundreds of posts here, I think my best bet is to purchase Disk Warrior. My question is, which version should a purchase? As a result of the work I've explained below, my system is currently running the version installed from my OSX Install CD. I'm not sure what version this is, but my Mac came with CDs for OS9, OSX, and an upgrade to 10.2.8. Is there a version of Disk Warrior that will support 10.2-10.4? I want to fix the current issues but still be able to use this software when (or IF) I upgrade.
I'm happy to provide any info needed and appreciate ANY help. Thanks,
On a routine startup I encountered the stalled progress indicator (spinning gear) and its been downhill from there. I've scoured the Mac forums here for possible fixes, but so far nothing has been able to completely solve my problem. Here's a brief rundown of what I have done so far:
1) Booted from OSX Install CD and ran disk utility. This verified I had catalog and node errors that could not be repaired.
2) Ran Apple Hardware test from CD. Everything was fine.
3) Ran TECHTool Pro that came with my AppleCare CD and identified similar errors but could not repair them. At this point I also got an "Invalid Sibling Link" error.
Finally I decided that the data I had saved on my HD was not crucial so I would attempt a reinstall of the OS and lose what was not backed up. So I:
5) Performed reinstall from OSX Install CD.
6) Ran Disk Utility, all was fine.
At this point I was able to run programs and boot up normally. Of course this was too good to be true, and it was, because subsequent restarts gave me even more errors! I was again experiencing the freeze at startup, although this time I was getting the Mac computer logo with smiley face icon for all eternity.
7) Again booted from OSX Install CD and ran Disk Utility. I'm now getting an "Invalid B-tree node size" error. I;ve tried all the cycles with repair utilities to no avail. I am also unable to start up in single user mode so I'm stuck.
iMac G4 Flat Panel Mac OS X (10.2.x) Purchased 2002
iMac G4 Flat Panel Mac OS X (10.2.x) Purchased 2002

Thanks! I will order DW and give it a try...
I have run the Apple Hardware diagnostic CD twice (at different points in this process) and everything has come back cleanly. I am fairly certain this is a directory issue, but we'll wait and see. At the very least I will have DW to back up any future systems.
This is sortof off topic, but what is the general service fee for visiting the Genius Bar? I consulted a Mac pro there to discuss an upgrade to my system, but there was no charge. I find this hard to believe...does anyone know? I can't seem to find anything online...

Invalid Response Code: (502) Proxy Error

I am getting following error when trying to consume a web service using a proxy .
I have two Server, named A and B
The wsdl file was generate at A by Function Module => Utilities => More Utilities => Create Web Service => From Function Module. And I can send data in Web Services Navigator(A Server ).
So I import it in Web Dynpro as a model.But I deploy it in another J2EE engine(B Server).
the Error log:
java.rmi.RemoteException: Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (502) Proxy Error ( æ¾ä¸å°ä¸»æºã ). The requested URL was:"http://hqbd3.sinopec.com:8000/sap/bc/srt/rfc/sap/ZHQMRO_RP_RYJG_WS?sap-client=200"com.sinopec.bwbcs.wd.rpryjg.batchinput.medol.proxies.ZHQMRO_RP_RYJG_WSSoapBindingStub.bicCfzhqmroRpRyjg(ZHQMRO_RP_RYJG_WSSoapBindingStub.java:99) com.sinopec.bwbcs.wd.rpryjg.batchinput.medol.proxies.ZHQMRO_RP_RYJG_WSSoapBindingStub.bicCfzhqmroRpRyjg(ZHQMRO_RP_RYJG_WSSoapBindingStub.java:108) com.sinopec.bwbcs.wd.rpryjg.batchinput.medol.Request_ZHQMRO_RP_RYJG_WS_bicCfzhqmroRpRyjg.execute(Request_ZHQMRO_RP_RYJG_WS_bicCfzhqmroRpRyjg.java:87) com.sinopec.bwbcs.wd.rpryjg.batchinput.RpryjgBatchCreate.assignElementToRpryjgListData(RpryjgBatchCreate.java:387) com.sinopec.bwbcs.wd.rpryjg.batchinput.RpryjgBatchCreate.createRyjgData(RpryjgBatchCreate.java:320) com.sinopec.bwbcs.wd.rpryjg.batchinput.RpryjgBatchCreate.onActionBatchInput(RpryjgBatchCreate.java:217) com.sinopec.bwbcs.wd.rpryjg.batchinput.wdp.InternalRpryjgBatchCreate.wdInvokeEventHandler(InternalRpryjgBatchCreate.java:261) com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420) com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132) com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713) com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666) com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250) com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) javax.servlet.http.HttpServlet.service(HttpServlet.java:760) javax.servlet.http.HttpServlet.service(HttpServlet.java:853) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) java.security.AccessController.doPrivileged(Native Method) com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Whether it is because different Servers?
Edited by: Cheney Cao on May 20, 2008 3:38 AM

/****:/#

Invalid Volume Free Block Count Error In Disk Utility

My Ti-Book has been acting very strange lately so I decided to run the Verify Disk Option in the Disk Utility program. When I ran it, I got a series of messages in red that were:
Volume Bit Map Needs Minor Repair
Invalid volume free block count
Error: The Underlying Task reported failure on exit
When the verify disk function completed, I was asked to enter my administrator password. When I entered it and clicked on Okay, the Disk Utility program froze up and I had to restart.
What do the two error messages mean? How do I repair my disk?

Hi, WTM. The Verify Disk routine in Disk Utility is almost never worth running. It does the same error-detection tasks as the Repair Disk routine, but then it doesn't repair any errors that it finds.
Start up from your Tiger installer DVD, open Disk Utility, select your hard drive, and run the Repair Disk routine. If you get the same "task reported failure on exit" message, you'll need a stronger directory-repair utility like DiskWarrior, or you'll need to erase your hard drive completely and reinstall everything on it.

I can't get rid of 169 ip addresses on devices

I am having problems with computers and iOS devices using a 169.x.x.x address instead of the DCHP address supplied by Charter. This started just recently. The only thing that has changed is I installed Lion a few weeks back.
I have gone through three modems or modem/router combos. Two different motorola modem/routers and now the rented modem only motorola from Charter. None of that made a difference.
I have removed all AppleTV’s from the network. I have replaced a hub switch with another one. I have reset computers, renewed leases, started with one device and added more and tested each one. Nothing really seems to work.
This is what I have right now. My main work computer is hard wired to the modem via the switch and is connected to the internet. The family computer is also hard wired and is getting the 169 address. I have two network printers that both are not working. You can see them but you can’t print to them. My iphone and ipad are not working right now because I took the Airport Xtreme router offline to solve the problem.
Now I am at the end of my rope. Any thoughts on these last two ideas.
1. Get a static IP from charter and assign my own addresses.
2. Use my Airport Extreme as the next device after the modem and in place of my switch.
Any thoughts?
Shawn

#2 is the right idea. You need to reconnect AirPort Extreme even if you're not using Wi-Fi.
Your computers and printers used to get their LAN IP addresses from AirPort Extreme. With that out of the picture, those systems and peripherals self-assign 169.* addresses.
For Charter to be happy, only one device should request an IP address from the cable modem. In your configuration, that should be your AirPort Extreme. Whenever you change the device that's plugged into the modem, you may need to power down your modem for as long as 30 minutes to get it to recognize the new configuration.
Here's how things should probably be wired:
AirPort Extreme WAN port->cable modem
AirPort Extreme LAN port->LAN switch
Desktops, AppleTV, printers, etc.->LAN switch / Wi-Fi
If you have enough Ethernet ports on your AirPort Extreme to accommodate all your devices, skip the switch and do this:
AirPort Extreme WAN->cable modem
Desktops, AppleTV, printers->AirPort Extreme LAN ports / Wi-Fi
If these arrangements seem not to work, reset your AirPort Extreme to its factory settings, cycle power on the cable modem and AirPort Extreme and try again.
Best of luck to you.

UTL.MAIL error ORA-29279: SMTP permanent error: 501 Address Syntax Error in

Hi,
I am new to the forum so please excuse if I post incorrectly without conforming to the standards.
We need to send mails using the UTL.MAIL package and have installed them on the database.
Whenever I am trying to send an email I am getting the following error:
ERROR at line 1:
ORA-29279: SMTP permanent error: 501 Address Syntax Error in
[email protected]
ORA-06512: at "SYS.UTL_MAIL", line 654
ORA-06512: at "SYS.UTL_MAIL", line 671
ORA-06512: at line 2
The test code which I am running is as follows:
BEGIN
UTL_MAIL.send(sender => 'test <[email protected]>',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
I have tried different combinations:
BEGIN
UTL_MAIL.send(sender => 'test "<[email protected]>"',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
even tried
BEGIN
UTL_MAIL.send(sender => '[email protected]',
recipients => '[email protected]',
subject => 'UTL_MAIL test subject',
message => 'UTL_MAIL test body');
END;
Everytime I am getting the same error.
This seems to be working with an exchange mail server but never on the SMTP server.
In the SMTP server logs the sender address is not having the angular brackets <> unlike the other mails which are being sent over.
It seems that the SMTP server is pretty strict and the SMTP admin will not change any settings on the server.
The oracle version is as follows
Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Could you please help me out with a solution.
Some how the angular brackets are geting stripped off (which UTL MAIL package generally does), Is there any way in which I can include the angular brackets.
Edited by: 984757 on 29-Jan-2013 02:56
Edited by: 984757 on 29-Jan-2013 02:57

I dislike UTL_MAIL - clunky and poor abstraction interface, and not well written.
Had a look at the code. It does this:
WHILE (ALL_RCPTS IS NOT NULL) LOOP
UTL_SMTP.RCPT(MAIL_CONN,'<' || GET_ADDRESS(ALL_RCPTS) || '>');
END LOOP;The GET_ADDRESS() function process the ALL_RCPTS parameter, returns the 1st address from it, and updates the (in/out) parameter with the remaining string.
SQL> var address varchar2(200);
SQL> exec :address := '<[email protected]>,[email protected]';
PL/SQL procedure successfully completed.
SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
get_address=[email protected] address=[email protected]
PL/SQL procedure successfully completed.
SQL> exec dbms_output.put_line( 'get_address='||UTL_MAIL.GET_ADDRESS(:address)||' address='||:address );
get_address=[email protected] address=
PL/SQL procedure successfully completed.
SQL> The address is explicitly surrounded by brackets as per the RFC. So that is what your SMTP server should see.
If not - perhaps then our UTL_MAIL versions do not match. Cannot recall from what version I pulled and unwrapped the UTL_MAIL package code I have.
Personally though, I've ceased using UTL_MAIL a while back. It lacks in may respects. I have written my own mail package that supports multiple attachment, complex Mime formatting, attachments of 20+ MB in size, and so on - running on the UTL_SMTP interface (that provides the transport layer for sending mail). And for issues like you are facing, I suggest considering using UTL_SMTP directly.
Edited by: Billy Verreynne on Jan 29, 2013 12:52 PM
(Updated the code with HTML entity names to get the code snippet to render correctly)

Invalid 169.* IP Address (DHCP error)

Similar Messages

Maybe you are looking for