Invalid adapter name"c/CVI Flexible Prototype Adapter" Error code:-17336.

Hi,
After replacing the mainboard of the test computer and activating Windows, test station shows "Invalid adapter name"c/CVI Flexible Prototype Adapter" . Invalid adapter name. Error code:-17336" when we try to run TestStand Sequence(4.2.1.83). Could you help to guide. Thanks!
Daniel

Hi Daniel,
I would agree with Doug regarding checking the licensing in the License Manager, deactivating if it is activated and then reactivating. It is possible that the MAC address changed when you switched out the motherboard and this would cause the computer ID to change and render your current licensing invalid. If this does not solve the situation, could you specify when this error occurs? Is this when you open Teststand or when you try to run a particular program? Do you have a base or debug deployment Teststand license?
I look forward to your response and hope that you have a great day!
Regards,
Jackie
DAQ Product Marketing Engineer
National Instruments

Similar Messages

RasClient:dialed a connection named "VPN Connection Name " which has failed. The error code returned on failure is 789 on windows 8.1

Hello,
i am trying to connect to my corporation VPN Server " ISA 2006" using windows 8.1 client built in VPN, but its returned the following error:
Event ID 20227: dialed a connection named "VPN connection Name" which has failed. The error code returned on failure is 789.
VPN connection is working fine with windows XP and windows 7 with no issue , this error is only appear when try to connect to using windows 8 client machine.
this error is shows only on windows 8.1 client , same procedures used to enroll the certificate from internal CA " IPsec Type" is followed .
below are the ISA server specifications:
VPN Server : ISA 2006.
windows Server version 2003.
appreciate your quick help and reply .
Thanks

Thanks for your reply.
i would like to add another point for this case, that when we are trying to enroll a certificate from internal CA web enrollment directly using windows 8 " internet explorer 11" , its install a certificate without Digital
Signature and non-repudiation in key usage property, then when try to connect , its will give the above error 789 ..
when try to enroll a certificate into windows 7 " internet explorer 10" and then export and import this certificate into windows 8.1 machine "with the name of
windows 8.1 machine" into windows 8.1 machine, the VPN is working normally and without issue.
The properties of the Certificate are difference between windows 7 machine and windows 8 machine is key usage missing the Digital Signature and non-repudiation properties when enroll
from windows 8.1 " internet explorer 11", this is in fact because of
we don't have an option for key usage " both" when subment a certificate on web enrollment page from windows 8 machine ,, the only option available is exchange "
no signature and both option available "
i believe that there is something wrong when using windows 8.1 internet explorer 11 so its gave a certificate with wrong key usage property .
appreciate your quick help in this .
thanks

W510 w/WinXP, device manager reports issue w/1394 Net Adapter (error code=10)

I recently reimaged a brand new W510 w/WinXP w/SP3 & installed Lenovo Toolbox utility. Which immediately identified an issue w/the 1394 Net Adapter in Device Manager. Looking at the Device Status (details) it states "The Device Cannot Start (code 10)" and suggests reloading the drivers. I've tried updating them using the UPDATE DRIVER button and searching the web but it states Windows cannot find a better match then the one I have. I've copied the driver from a 2nd WinXP machine (nic1394.sys). I've installed all of the Microsoft updates (for Critical Software and Hardware). Installed the Lenovo Driver Update utility & installed all available driver updates and flashed the BIOS and nothing has resolved it. I've run the full Lenovo toolbox diags and everything passes (including the 1394 adapters) I've also sent the PC into Lenovo for repair and they indicate everything tests fine as well..
Question, does anyone one know if this device is compatible w/WinXP ? Any other suggestions ?
Thanks,

hey acekc77,
the Lenovo Toolbox, is it version :6.0.5802.24 ? If it isn't, could yo go here and install the latest version >>
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73783
At the same do go here and ensure all driver/software is updated
>> http://www-307.ibm.com/pc/support/site.wss/MIGR-74582.html
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Invalid column name error

Having an interesting problem with a site I'm fixing. I'm
sure I'm looking past the obvious, so maybe some of you can help:
ASP Pages display results from recordset based on a session
variable (memberID) that is created during user login.
Recordset looks like this:
<%
Dim rs__MMColParam
rs__MMColParam = "%"
If (Session("memberID") <> "") Then
rs__MMColParam = Session("memberID")
End If
%>
<%
set rs = Server.CreateObject("ADODB.Recordset")
rs.ActiveConnection = MM_cnConnection_STRING
rs.Source = "SELECT id, adminusername, anotherone1,
anotherone2, anotherone3 FROM dbo.basic1 WHERE adminusername = '" +
Replace(rs__MMColParam, "'", "''") + "'"
rs.CursorType = 0
rs.CursorLocation = 2
rs.LockType = 3
rs.Open()
rs_numRows = 0
%>
Seems correct to me, unles I'm overlooking something obvious.
Unfortunately I keep getting the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid column
name 'SESSIONVAR'.
(Note: in this error above, SESSIONVAR is the name of the
session variable memberID)
Strange thing is, as long as the session variable is a #,
everything works. If it's a word, it won't work. So it appears the
session variables are being defined and passed to the next page.
As for the database, it's a SQL Database
column 'adminusername' is a NVARCHAR with a 4000 char limit
Thanks in advance for any help.

Are you sure the query is the same? It looks like the one you posted has a syntax error
SELECT e.emp_id, e.dep_id
FROM emp e, loc ct, dep dt
WHERE[b] c.dep_id[/b] IN (SELECT dt.dep_idYou've aliased the LOC table to CT in the FROM clause, but you're using the alias C in the WHERE clause. You use the correct alias CT in the query in your IN clause.
Justin

Query timeout expired and Invalid object name

I have a program that processes data (dequeues) and polls about every 2.5 seconds - normally there are several records to process per second - it does this constantly 24/7. The program runs fine at about 100 sites. At 2 sites the following error occurs
about once per day. Typically the table has less than 10 records that get processed ie read then deleted. DataObjects are used ie the data is read, connection closed, processed, deleted using T-SQL from ADO - ie transactions are as short as possible.
Error#-2147217871 Query timeout expired. SQL:SELECT RealID, RxerID, PhoneID, Min(ServerDtTm), min(ID) FROM dbo.tblPreReceiver GROUP BY RealID, RxerID, PhoneID ORDER BY Min(ServerDtTm), min(ID)
Inner exception Error No. -2147217865. Error Desc:Invalid object name 'dbo.tblPreReceiver'.. Native Error:208 Source:Microsoft OLE DB Provider for SQL Server SQL State:42S02.
SQL Server 2008R2 (Express at one site and Standard another).
The program then runs again 2.5 seconds later without error.
Can anyone explain why?
I suspect it is a blocking error but the error message does not suggest this at all. There is another application which writes to this queue, this does not report the error.

Yes, blocking can be the cause. The default command timeout is 30 sec and if the table is locked by an other process, the command waits until the table is accessable ... or the timeout raises. You could increase the timeout value or you could perform "dirty
read" = ignoring lock, but I don't want to suggest to do it.
Olaf Helper
[ Blog] [ Xing] [ MVP]

How do I pass an array of structs to a C function using the dll flexible prototype adapter?

What I want to do is pass into a C dll function a variably sized Array of structs of type TPS_Data. My Code compiles but when I run it in TestStand, I get an error -17001; Program Error. "Cannot allocate 0 size buffer Error in parameter 2, 'OpenFrdData'."
I've allocated the Array of structs, and all of the information is there before I call my function, so is it my prototype? Or am I asking too much of the DLL Flexible Prototype Adapter to pass an Array of Structs?
I can pass in a single struct of type TPS_Data and that works, but not an array.
Here's the relevent code:
typedef struct TPS_DATA
char Report_Number[256];
char System_Name[256];
char Open_Date[256];
char UUT_Part_Number[256];
char UUT_Serial_Number[256];
char UUT_Name[256];
char Open_Employee_Name[256];
char Open_Employee_Number[256];
char Close_Employee_Name[256];
char Close_Employee_Number[256];
char Close_Date[256];
} TPS_Data;
typedef struct TPS_DATA_ARRAY
TPS_Data DataRecord;
} TPS_DataArray;
long __declspec(dllexport) __stdcall OpenDialog (CAObjHandle Context, TPS_DataArray *TpsData[], const char *psFaultStr, char *sComments, const int nCount);

OK,
I can pass the data to the DLL function, using the following types:
typedef struct StringArrayType
char string[10][256];
} StringArray;
typedef struct MultiStringArrayType
StringArray Record[10];
} MultiStringArray;
void __declspec(dllexport) __stdcall ATP_TestStructPassing(StringArray Strings)
return;
void __declspec(dllexport) __stdcall ATP_TestMultiStructPassing(MultiStringArray *Strings)
return;
But when the MultiStruct function Exits, TestStand reports an Error:
-17501 "Unexpected Operating System Error" Source: 'TSAPI'
There doesn't seem to be a way around this, and once the error occurs, I have to force quit TestStand. I've included the sequence file, and the dll code can be compiled from the fun
ctions shown above.
Any thoughts on how to get around this error would be greatly appreciated.
Attachments:
StructArrayPassing.seq ‏16 KB

Invalid column name error in JDBC adapter

Hi all,
My scenario is Proxy->XI->JDBC.
I get the following error in receiver JDBC adapter.
Unable to execute statement for table or stored procedure. 'Account_Master' (Structure 'STATEMENT') due to com.microsoft.sqlserver.jdbc.SQLServerException: Invalid column name 'A7'.
There is no column by name A7 in the table nor there is a field by that name in the data type.
Can anyone provide any help

Hi Swatantra,
compare your message-type with the database table!
There must be difference!
Regards Mario

How to use : bind character in DB adapter Select Query SOA11g. Getting Error code :17003 .java.sql.SQLException: Invalid column index error

Hi All,
The Actual query to perform is below.
SELECT name,number from emp WHERE CASE WHEN :1='T' AND term_date IS Not NULL THEN 1 WHEN :1='A' AND term_date IS NULL THEN 1 WHEN :1='ALL' THEN 1 ELSE 1 END = 1;
I have tried in DB adapter like below as a parameter for :1 as #vInputParam
SELECT name,number from emp WHERE CASE WHEN #vInputParam='T' AND term_date IS Not NULL THEN 1 WHEN #vInputParam='A' AND term_date IS NULL THEN 1 WHEN #vInputParam='ALL' THEN 1 ELSE 1 END = 1;
Getting Error code :17003 .java.sql.SQLException: Invalid column index error.
Please suggest me on using ':' bind character in DB adapter Select Query SOA11g.
Can someone help me on this please?
Thanks,
Hari

Hi,
Could you please make sure your binding style(Oracle Positional,Oracle named..etc) of the Seeded VO and Custom Vo are same.
This is the option you will get when you are extending your vo. So make sure that both are same.
You can refer the below link too
VO extension leads to "Invalid column index" exception
Thanks
Bharat

"ORA-00903: invalid table name" when enqueue using a CLOB in an ADT payload

I am attempting to enqueue into an AQ that has an ADT with a CLOB field in it. If I leave the CLOB empty, it works. As soon as I place content in it, I get the error below in the BPEL log.
I actually get the same problem when I run the "AQ_ADT_with_CLOB_Payload" example. Please help!
Error in the BPEL log:
<2005-11-08 09:22:07,784> <ERROR> <default.collaxa.cube.ws> <AQ Adapter::Outbound> MessageWriter_enqueue: Could not enqueue message due to database error
<2005-11-08 09:22:07,784> <ERROR> <default.collaxa.cube.ws> <AQ Adapter::Outbound>
java.sql.SQLException: ORA-00903: invalid table name
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:181)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:661)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:951)
at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:693)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1057)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2901)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:2942)
at oracle.tip.adapter.aq.database.MessageWriter.doEnqueue(MessageWriter.java:530)
at oracle.tip.adapter.aq.database.MessageWriter.enqueue(MessageWriter.java:341)
at oracle.tip.adapter.aq.database.MessageWriter.writeMessage(MessageWriter.java:303)
at oracle.tip.adapter.aq.outbound.AQEnqueuer.execute(AQEnqueuer.java:108)
at oracle.tip.adapter.aq.AQInteraction.executeRunTime(AQInteraction.java:194)
at oracle.tip.adapter.aq.AQInteraction.execute(AQInteraction.java:180)
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:469)
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeInputOnlyOperation(WSIFOperation_JCA.java:652)
at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:441)
at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:310)
at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:184)
at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:601)
at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:316)
at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:185)
at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3398)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1905)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:100)
at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:185)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5410)
at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1300)
at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:509)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:307)
at ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.handleInvoke(ICubeDeliveryLocalBean_StatelessSessionBeanWrapper16.java:1796)
at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:76)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at com.evermind.server.ejb.MessageDrivenBeanInvocation.run(MessageDrivenBeanInvocation.java:123)
at com.evermind.server.ejb.MessageDrivenHome.onMessage(MessageDrivenHome.java:748)
at com.evermind.server.ejb.MessageDrivenHome.run(MessageDrivenHome.java:921)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)

OK, I figured it out myself. :)
Turns out when I define the queue name in the AQ Adapter definition, I was specifying "<Default Schema>" as the schema name. When I changed this to my actual schema name (eg: "SCOTT"), it worked. Nice little bug there!
The reason it broke with the example program is because I was changing the schema name before I deployed it. As I didn't have a SCOTT schema.
So the moral of the story here is, don't use "<Default Schema>"!
I was running on 10.1.2.0.0 [build #1787 ]. In case anyone wants to fix this.

Receiver File Adapter error

Hi all,
I am trying to convert the XML to Plain file in receiver file adapter. I am using module - StrictXml2PlainBean
My target structure is -
<MT_Name>
    <records>
        <Header>
        </Header>
        <Item>
        </Item>
    </records>
</MT_Name>
<Header> and <Item> are at same level.
When I use --
1. Header.fieldSeparator = ,
2. Item.fieldSeparator = ,
3. recordTypes = Header,Item
Then I get this error -
Message processing failed. Cause: com.sap.aii.af.app.modules.conversion.xml2plain.ConversionException: Invalid structure name encountered during conversion: records at XML element MT_Name,records
When I use --
1. records.fieldSeparator = ,
2. singleRecordType = records
Then I get this error -
Message processing failed. Cause: com.sap.aii.af.app.modules.conversion.xml2plain.ConversionException: The element nesting level for the structure MT_Name is too deep (reference: 3 levels, found: 4 levels) at XML element MT_Name,records,Header,Item
To add more details to the scenario, multiple records can be generated but one record will have only one Header, with multiple Items.
Any help in this regard will be highly appreciated.
Thanks,
Abhi

Hi Abhi,
Here you go....
For your target structure as:
<MT_Name>
<records>
<Header>
</Header>
<Item>
</Item>
</records>
</MT_Name>
Where I have assumed that <Header> and <Item> are at same level.
DO NOT use any Module just simply configure the receiver channel as below:
In the file Receiver Channel
Recordset Structure = Header,Item
Name                                                                    Value
Header.fieldSeparator                                             ,
Item.fieldSeparator                                                  ,
I have tried this and it works.
Let me know if you are facing any issues.
Cheers
Dhwani

INSERT INTO with SELECT invalid column name error

I have a problem where I wish to update a table with only records that have changed or insert into a table with only new records. The Source table is queried using OPENQUERY as we have no staging db for this.
I have the following code (adapted from a working example):
INSERT INTO dbo.Contact
SELECT contactID, lastUpdatedDateTime
FROM
MERGE INTO dbo.Contact AS DT
USING (SELECT * FROM OPENQUERY(LINKED_SERVER,'SELECT contactID, lastUpdatedDateTime FROM Contact')) AS DS
ON (DT.ContactID = DS.ContactID)
WHEN NOT MATCHED THEN
INSERT VALUES (DS.contactID, DS.lastUpdatedDateTime)
WHEN MATCHED AND (DT.lastUpdatedDateTime <> DS.lastUpdatedDateTime) THEN
UPDATE SET DT.contactID = DS.contactID, DT.lastUpdatedDateTime = DS.lastUpdatedDateTime
OUTPUT $Action Action_Out
AS MERGE_OUT
WHERE MERGE_OUT.Action_Out = 'UPDATE';
GO
When I run this query I am getting the following errors referring to the columns in the SELECT:
Msg 207, Level 16, State 1, Line 2
Invalid column name 'contactID'.
Msg 207, Level 16, State 1, Line 2
Invalid column name 'lastUpdatedDateTime'.
Am I missing something obvious as I can't quite work out why? The Target and source definitely exist with the specified columns present in both...

Hello,
The issue is because you are not outputting those values from the inner merge statement. All you are currently outputting is the action, so the error is correct as those columns do not exist.
Change your output portion to be:
OUTPUT inserted.contactID, inserted.lastUpdatedDateTime, $Action Action_Out
Then it should work.
Sean Gallardy | Blog | Microsoft Certified Master

Sybase JDBC driver & Invalid column name error

I submitted a note a year ago concerning JDBC-ODBC bridge and SQL Server db. Same Invalid column name error. The resolution was a bug in the XSU code.
This time the error is with a jconnect5 JDBC driver from Sybase to a Sybase ASA db. ASA is Adaptive Server Anywhere.
<ERROR xsql-timing="140">oracle.xml.sql.OracleXMLSQLException: S0022: Invalid column name 'name'.</ERROR>
However if I use a Sybase JDBC driver from INet Software of Germany, I get the desired result of my query.
Below are sample XSQLConfig.xml definitions.
INet Software Sybase JDBC driver definition:
- <connection name="deasa">
<username>dba</username>
<password>sql</password>
<dburl>jdbc:inetsyb:LEMKAU:2638?database=asademo</dburl>
<driver>com.inet.syb.SybDriver</driver>
<autocommit>true</autocommit>
</connection>
Sybase jconnect5 Sybase JDBC driver definition:
- <connection name="asa">
<username>dba</username>
<password>sql</password>
<dburl>jdbc:sybase:Tds:lemkau:2638?ServiceName=asademo</dburl>
<driver>com.sybase.jdbc.SybDriver</driver>
<autocommit>true</autocommit>
</connection>
I believe the bug has to do with the numeric codes that the drivers use to determine data types are not properly interpreted.
See XML General note title "insert-request, xsu 2.1.0 beta & SQL Server" for reference.
Steve.

Thanks for the notification. We will look into this issue...

The Network Adapter could not establish the connection Error Code: 17002

Hi,
after upgrade b41 to b49, I get error from subject, without any changes in my app.
This occurs only on Oracle AS, on standalone OC4J application works OK.
I use connection defined in persistence.xml:
<non-jta-data-source>jdbc/MyAppDS</non-jta-data-source>
and can successfully test this connection in Enterprise manager.
Also, I tried all tricks mentioned here:
http://www.websina.com/bugzero/kb/oracle-connection.html
I know, that this is JDBC layer problem, but I am sure, that my connection is OK, and
after downgrade to b48 this problem fall away.
Bye,
Lumir

Could you provide the full stack trace to the exception.Exception [TOPLINK-4002] (Oracle TopLink Essentials - 2.0 (Build b50-beta3 (06/07/2007))): oracle.toplink.essentials.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: Výjimka vstupu/výstupu: The Network Adapter could not establish the connection
Error Code: 17002
     at oracle.toplink.essentials.exceptions.DatabaseException.sqlException(DatabaseException.java:305)
     at oracle.toplink.essentials.jndi.JNDIConnector.connect(JNDIConnector.java:150)
     at oracle.toplink.essentials.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:185)
     at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:233)
     at oracle.toplink.essentials.internal.databaseaccess.DatabaseAccessor.connect(DatabaseAccessor.java:242)
     at oracle.toplink.essentials.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:309)
     at oracle.toplink.essentials.threetier.ConnectionPool.buildConnection(ConnectionPool.java:117)
     at oracle.toplink.essentials.threetier.ExternalConnectionPool.startUp(ExternalConnectionPool.java:135)
     at oracle.toplink.essentials.threetier.ServerSession.connect(ServerSession.java:458)
     at oracle.toplink.essentials.internal.sessions.DatabaseSessionImpl.login(DatabaseSessionImpl.java:586)
     at oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider.login(EntityManagerFactoryProvider.java:235)
     at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerSetupImpl.deploy(EntityManagerSetupImpl.java:227)
     at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerFactoryImpl.getServerSession(EntityManagerFactoryImpl.java:93)
     at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:126)
     at oracle.toplink.essentials.internal.ejb.cmp3.base.EntityManagerFactoryImpl.createEntityManagerImpl(EntityManagerFactoryImpl.java:120)
     at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerFactoryImpl.createEntityManager(EntityManagerFactoryImpl.java:91)
     at idea.isko.db.service.impl.AbstractServiceImpl.createEntityManager(AbstractServiceImpl.java:77)
How have you deployed your application exactly, i.e. what is the structure of your ear. I use standard war for deploy.
Is the DataSource defined in your server, or your application? Defined on server, test on Enterprise manager passed successfully.
Try using a direct JDBC connection in your persistence.xml (driver/url), does this work?Not work, this same exception.
How do you access your entity manager? (managed, non-managed, jta, non-jta?)non-managed, non-jta.
FYI, I make downgrade to build 48, and this works - it is last version without this problem.
I added some tracing code to my SessionCustomizer:customize():
DatabaseLogin login = session.getLogin();
logger.fine("URL is :" + login.getDatabaseURL());
With build 48, connection defined using toplink.jdbc.* , the output is:
07/06/11 10:04:36.218 10.1.3.1.0 Started
07/06/11 10:04:43.593 MyApp: 10.1.3.1.0 Started
07/06/11 10:05:18.578 MyApp: FINE - Customizing session - directProperties
07/06/11 10:05:18.578 MyApp: FINE - URL is :jdbc:oracle:thin:@(DESCRIPTION ... (cut)
07/06/11 10:07:16.875 MyApp: 10.1.3.1.0 Stopped
And after upgrade to build 50:
07/06/11 10:10:12.703 10.1.3.1.0 Started
07/06/11 10:10:30.953 MyApp: 10.1.3.1.0 Started
07/06/11 10:10:52.281 MyApp: FINE - Customizing session - directProperties
07/06/11 10:10:52.296 MyApp: FINER - THROW
Local Exception Stack:
Exception [TOPLINK-28014] (Oracle TopLink Essentials - 2.0 (Build b50-beta3 (06/07/2007))): oracle.toplink.essentials.exceptions.EntityManagerSetupException
Exception Description: Exception was thrown while processing property [toplink.session.customizer] with value [idea.jpa.util.ToplinkSessionCustomizer].
Internal Exception: Exception [TOPLINK-7058] (Oracle TopLink Essentials - 2.0 (Build b50-beta3 (06/07/2007))): oracle.toplink.essentials.exceptions.ValidationException
Exception Description: Invalid Connector [JNDIConnectordatasource name=>null] (must be of type DefaultConnector).
It seems to me, that Login is not properly initialized when app. run in Oracle AS.
Bye,
Lumir

Active Message When you have invalid host name in Proxy Server

I have an issue with one of our customers.
To communicate with any external parties, we have to define the host name in proxy server(Firewall).
I noticed that when we configure a WCF or HTTP adapter with an invalid host name of https url address, the messages remain active.
I am using ESB Toolkit in my implementation but I reproduced same issue using Orchestration with static port and dynamic port.
I traced the message using Fiddler and I noticed that we only have one hit with Status Code 407(407 proxy authentication required) and it is not retrying which is not a risk to my implementation. However, I consumed a web service using a console application
and I set an invalid host name for url but I noticed there are two hits in Fiddler one is 200 http status code and the second hit 407 http status code and I could catch the exception.
The question is: How to enforce BizTalk to suspend these messages or how to handle these messages?
Note that I did the followings trials but no lucks:
- I updated retry count to zero
- Delivery Notification of the Port is Transmitted
- updated closeTimeout, sendTimeout, openTimeout values
Thanks in Advance
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi Mohan,
You are getting "The remote name could not be resolved" because you are not using Proxy.
I tried to tweak on Retry Count(tried zero,1,2...). I am sure it is not retrying because there is not any network hits or packets in Fiddler or WireShark and messages stay forever.
ESB is not my issue because I reproduced same issue with a simple orchestration consuming a service with a static send port.
I have the following notes:
- In console application and Biztalk application using WireShark I can see same number and types of network packets in both cases.
- I tried to change https url to http with incorrect host name in this time retrying is working and message suspended after exceeding retry count.
- I tried to use https which is the required one with correct host name and change service name, I could see client OK Hello and server OK Hello and retying working fine and message suspended after that.
I think the issue with handshaking with proxy server because I could not see client Ok and Server ok hello when changing the host name.
There is another thread talking about an issue with active message and handshake.
https://social.technet.microsoft.com/Forums/en-US/736f0f72-ccc9-4a84-802a-7a1ff788a04a/ssl-2way-cert-incident-remains-active?forum=biztalkgeneral
But the question remains open that how we can handle this active message and why BizTalk not throwing an error?
Thanks,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Unable to create database due to ORA-12560, TNS protocol adapter error

Hello,
I'm trying to create an 8.1.7.0 database on a W2k server, but it is failing because as soon as svrmgrl is launched, I get an ORA-12560, TNS: protocol adapter error:
D:\oracle\db_creation_scripts>D:\oracle\ora81\bin\svrmgrl @D:\oracle\db_creation_scripts\mterm62run.sql
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
ORA-12560: TNS:protocol adapter errorEcho ON
SVRMGR> connect INTERNAL/manager
ORA-12560: TNS:protocol adapter error
SVRMGR> startup nomount pfile="D:\oracle\admin\mterm62\pfile\initmterm62.ora"
LCC-00161: Message 161 not found; product=RDBMS; facility=MGR
My ORACLE_HOME, ORACLE_SID, and TNS_ADMIN environmental variables are correctly set, and I'm able to tnsping the listener.
I've enabled tracing, and my client trace file is:
--- TRACE CONFIGURATION INFORMATION FOLLOWS ---
New trace stream is d:\trace\client_trace.log_2084_9.trc
New trace level is 6
--- TRACE CONFIGURATION INFORMATION ENDS ---
--- PARAMETER SOURCE INFORMATION FOLLOWS ---
Attempted load of system pfile source d:\oracle\ora81\network\admin\sqlnet.ora
Parameter source loaded successfully
Attempted load of local pfile source D:\oracle\db_creation_scripts\sqlnet.ora
Parameter source was not loaded
-> PARAMETER TABLE LOAD RESULTS FOLLOW <-
Successful parameter table load
-> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
TRACE_DIRECTORY_SERVER = d:\trace
TRACE_DIRECTORY_CLIENT = d:\trace
NAMES.DIRECTORY_PATH = (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
SQLNET.AUTHENTICATION_SERVICES = (NTS)
TRACE_UNIQUE_CLIENT = on
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
--- PARAMETER SOURCE INFORMATION ENDS ---
--- LOG CONFIGURATION INFORMATION FOLLOWS ---
Log stream will be "D:\oracle\db_creation_scripts\sqlnet.log"
Log stream validation not requested
--- LOG CONFIGURATION INFORMATION ENDS ---
nigini: entry
nigini: Count in NI global area now: 1
nigini: Count in NI global area now: 1
nrigbi: entry
nrigbni: entry
nrigbni: Unable to get data from navigation file tnsnav.ora
nrigbni: exit
nrigbi: exit
nigini: exit
niqname: Hst is already an NVstring.
niqname: Inserting CID.
niotns: entry
niotns: niotns: setting up interrupt handler...
niotns: Not trying to enable dead connection detection.
niotns: Calling address: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleMTERM62)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=MTERM62)(CID=(PROGRAM=D:\oracle\ora81\bin\SVRMGRL.EXE)(HOST=SERV0354)(USER=tarisa))))
nsmal: 140 bytes at 0x12493f0
nscall: connecting...
nladini: entry
nladini: exit
nladget: entry
nladget: exit
nlpcaini: entry
nlpcaini: prg =
nlpcaini: arg[0] =
nlpcaini: arg[1] =
nlpcaini: exit
nsmal: 420 bytes at 0x12542f0
nsmal: 1712 bytes at 0x12572f0
nsopen: opening transport...
ntpcon: entry
ntpcon: toc = 1
sntpcall: entry
snlpcss: entry
ntpcon: exit
nserror: nsres: id=0, op=65, ns=12560, ns2=0; nt[0]=530, nt[1]=2, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsmfr: 1712 bytes at 0x12572f0
nsmfr: 420 bytes at 0x12542f0
nladget: entry
nladget: exit
nsmfr: 140 bytes at 0x12493f0
nladtrm: entry
nladtrm: exit
nioqper: error from nscall
nioqper: nr err code: 0
nioqper: ns main err code: 12560
nioqper: ns (2) err code: 0
nioqper: nt main err code: 530
nioqper: nt (2) err code: 2
nioqper: nt OS err code: 0
niomapnserror: entry
niqme: entry
niqme: reporting NS-12560 error as ORA-12560
niqme: exit
niomapnserror: returning error 12560
niomapnserror: exit
niotns: Couldn't connect, returning 12560
niotns: exit
nigtrm: Count in the NI global area is now 0
nnfgdei: entry
nrigbd: entry
nrigbd: exit
nigtrm: Count in the NL global area is now 0
My tnsnames, listener and sqlnet.ora files are very simple:
## BEGIN TNSNAMES.ORA
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
MTERM62 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = mterm62)
(INSTANCE_NAME = mterm62)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = mterm62)
(PRESENTATION = http://admin)
# LISTENER.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = serv0354)(PORT = 1521))
SID_LIST_LISTENER =
(SID_DESC =
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = mterm62)
TRACE_LEVEL_LISTENER = ADMIN
# SQLNET.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
TRACE_DIRECTORY_CLIENT = d:\trace
TRACE_UNIQUE_CLIENT = on
TRACE_DIRECTORY_SERVER = d:\trace
SQLNET.AUTHENTICATION_SERVICES= (NTS)
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
Does anyone have any ideas what else I can check. I'm a Unix person, not a Windows person, which is making it even more complicated. If I was on Unix, I'd just blow everything away and start again from scratch, but since I'm not sure how to remove all traces from the registry, etc., I don't want to try that on this machine. There was already one other database created, but it's not goign to be used.
Any help would be greatly appreciated.
regards,
Tarisa.

hi,
thanks for the info. the problem, as it turns out, was that I was connected to the db server via a terminal service (Microsoft Management Console), which for some reason caused probelms with TNS. After I connected directly to the machine using VNC, I was able to create the database with no problems. strange but true.
regards,
Tarisa.

Invalid adapter name"c/CVI Flexible Prototype Adapter" Error code:-17336.

Similar Messages

Maybe you are looking for