Invalid Alias Format : Table_name.Column_name required error

Hi,
Below is the query I am using in one of my columns in a report. The ELSE part is working fine. but as soon as I put in the first 2 WHEN conditions, it gives me the invalid alias format error. tried changing the column names,single quotes on numbers, but error does not seem to go.
Please help.
Thanks,
Dan
CASE
WHEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = @{PERIOD}) IS NULL THEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = 12)
WHEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = 12) IS NULL THEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = @{PERIOD})
ELSE
FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = @{PERIOD}) - FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = 12)
END
Edited by: Danny on Jun 4, 2013 12:44 PM
Edited by: Danny on Jun 4, 2013 12:44 PM

NO luck :(
CASE
WHEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = '@{PERIOD}') IS NULL THEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = '12')
WHEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = '12') IS NULL THEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = '@{PERIOD}')
ELSE
FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = '@{PERIOD}') - FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = '12')
END
Can I try making null to 0 by doing IFNULL(measure,0). IN this case how do I do it since measure column is being generated at runtime with filter function like above.
Edited by: Danny on Jun 4, 2013 1:11 PM

Similar Messages

Invalid Alias Format : Table_name.Column_name required

Hi All,
I am new to the OBIEE 11g and I am trying to get used to the a lot it in one shot. I was hoping that someone could help me answer this question.
I am trying to replace a value from the database and replace it with another value if a condition is met. I am using the below SQL statement to get there however, when I select ok I get an error message:Invalid Alias Format : Table_name.Column_name required.
Can anyone tell me how I can accomplish my taskl? I am currently using OBIEE 11g and I am modifying the column measure by editing the formula with the below code. Let me know. Thanks.
select
CASE
WHEN Cmplt Claim - Process Time.Claim Date< 10/30/2010 THEN '10/30/2010'
END
From Cmplt Claim - Process Time.Claim Date;

Thank you so much. The error no longer shows up. I did however, get a diffrent error message. Not sure what that all means but if you can explain to me for a better understanding that would be super helpful. Or should I post under a diffrent subject?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. Please have your System Administrator look at the log for more details on this error. (HY000)
SQL Issued: SELECT 0 s_0, "VETSNET Operations Reports"."CLOV - End Product"."End Product Code" s_1, "VETSNET Operations Reports"."CLOV - End Product"."Rating Description" s_2, "VETSNET Operations Reports"."CLOV - File Date"."File Date" s_3, "VETSNET Operations Reports"."CLOV - Geography"."Station Name and Number" s_4, "VETSNET Operations Reports"."Cmplt Claim - Report Filter Flag"."Completed Brokered Flag" s_5, "VETSNET Operations Reports"."Cmplt Claim - Report Filter Flag"."Completed Detail Flag" s_6, CASE when "VETSNET Operations Reports"."Cmplt Claim - Process Time"."Claim Date"<('2012-10-15') then ('2012-10-15') else "Cmplt Claim - Process Time"."Claim Date" end s_7 FROM "VETSNET Operations Reports" WHERE (("CLOV - File Date"."File Date" = date '2012-10-09') AND ("CLOV - End Product"."End Product Code" IN ('681', '687')) AND ("Cmplt Claim - Report Filter Flag"."Completed Detail Flag" = 'Y') AND ("CLOV - End Product"."Rating Description" IN ('Control End Products', 'Other C&P End Products', 'Rating-Related End Products'))
Edited by: Hangten4881 on Oct 15, 2012 9:41 AM

Invalid License Data,Reinstall is required error in sequencing SQL server 2012 in APPV

Hi ,
I am trying to sequence SQL 2012 in 4.6 SP1 Sequencer ,with the following components selected in SQL.
1. Client Tools Backward Compatibility
2.Documentation Components
3. Management Tools - Basic
4. Management Tools -Complete
Sequencing Part goes fine. But in client when i launch the management studio it says that "Invalid
License Data,Reinstall is required"
requesting to you please help us to resolve the issue.!
Thanks -
Aditya Halder

There's a visual studio run time which needs to be installed locally.
Launch the install for SQL 2012, when it extracts the install media, it drops them into a randomly generated folder under C:\ grab the vssetup. Ensure that's installed locally on your machine
That was enough to get it to work for me BUT I believe, since I sequenced, something changed with an update and now there's some other steps required. Peter S, shared this with me. Try these steps:
Under HKEY_CLASSES_ROOT there's a Licenses registry key. If there's a value remove the value, do not delete the key, leave it there, if it doesn't exist create it. Set the virtualization level as Overwrite in the.
Create a PRE-LAUNCH Script which runs:
“VFS\ProgramFilesX86\Microsoft Visual Studio
10.0\Common7\IDE\DDConfigCA.exe” inside the package*. This creates the
machine related license key inside the App-V environment.
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

Invalid Keystore Format error

we need to configure an SSO from SAP portal and a third party website by passing encrypted userid as url parameters.
To configure the SSO I have received the public key of the third party and able to access it from server location. Now I have to access priavte key of the SAP Portal certificate and sign the UserId and pass it as url parameter. I have gone through many blogs and written code as below which is giving Invalid Keystore Format error.
My question is
1. What should be passed to FileInputStream?
As of now we are passing the .cer file which is stored as part of project.
Below code is throwing error at ks.load() method.
String fielPath1 = request.getPublicResourcePath()+"/SAPLogonTicketKeypair-cert1.cer";
FileInputStream ksfis = new FileInputStream(fielPath1);
KeyStore ks = KeyStore.getInstance("JKS");
ks.load(null, sPass.toCharArray());
BufferedInputStream ksbufin = new BufferedInputStream(ksfis);
ks.load(ksbufin, sPass.toCharArray());
PrivateKey priv = (PrivateKey) ks.getKey(alias, kPass.toCharArray());
Error is:
Invalid keystore formatsun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:633)sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)java.security.KeyStore.load(KeyStore.java:1185)am_sso_apc.doContent(am_sso_apc.java:132)com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
Please let me know how to pass the filepath to extract the priavte key .
Regards,
Satish

I found the solution. As follows:
keytool -list -keytool keytoolfile -storetype jceks

Invalid no format error

whenever i try to execute this statement it gives this error msg
Invalid no format
select to_char(salary,'$10,000') from emp;desc of table is
Name     Type         Nullable Default Comments
EMPNO    NUMBER(4)
NAME     VARCHAR2(10) Y
SALARY   NUMBER(7,2) Y
JOB      VARCHAR2(10) Y
HIREDATE DATE         Y
COMM     NUMBER(7,2) Y
DEPTNO   NUMBER(4)    Y

Do you want something like this ?
SQL> SELECT TO_CHAR(sal,'$9,999,99') FROM emp;
TO_CHAR(SA
    $50,00
    $28,50
    $24,50
    $29,75
    $30,00
    $30,00
     $8,00
    $16,00
    $12,50
    $12,50
    $15,00
TO_CHAR(SA
    $11,00
     $9,50
    $13,00
14 rows selected.
SQL> http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements004.htm#BABIGFBA
The above link will give you the complete information about number format models.
URL added: Saubhik on Nov 23, 2010 1:20 PM

Vivado 2013.4 ERROR: [IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order

Hello,
I just downloaded and installed Vivado 2013.4 on my Xubuntu 12.04 machine. But when I try to add IP from the IP catalog, as in the ug937 Lab1 step2, it fails with obscure error messages (see below).
Here's basically what I did:
-In the Flow Navigator, i select the IP Catalog button.
-In the search field of the IP Catalog, I type DDS.
-then I double-click the DDS Compiler and my error occure.
Please Help,
Jerome.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd":1]
Analysis Results[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd":1]
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
set_property target_language Verilog [current_project]
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
sources_1[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd":1]
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
update_compile_order -fileset sim_1
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd":1]
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd":1]
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[HDL 9-1654] Analyzing Verilog file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v":1]
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd":1]
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-2313] Loaded Vivado IP repository '/opt/Xilinx/Vivado/2013.4/data/ip'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-1704] No user IP repositories specified
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
Vivado Commands[Project 1-11] Changing the constrs_type of fileset 'constrs_1' to 'XDC'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
sim_1[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[HDL 9-1654] Analyzing Verilog file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v":1]
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-234] Refreshing IP repositories
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd":1]
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd":1]
set_property constrs_type XDC [current_fileset -constrset]

We had the same problem when switching to Ubuntu 14.04, and there actually is a solution for it: make sure your locales are set to English.
$> env | grep LC_*
should only show english (or C) locales, all others are known to cause parsing errors in some numbers, usually caused by wrong string-to-float conversions (e.g. 18,29 in german is 18.29 in english). You can change the locales in the file /etc/default/localesThis is not the first time we had problems with the locale settings, Xilinx does not seem to test their software with anything else than en_US, causing obscure bugs like this one.
HTH
Philipp

Invalid field format (screen error) on Table Control

Hello,
When selecting a line or multiple lines on a screen made by me(using a Table Control), I get Invalid field format (screen error). Debugging the code it sends the message when looping the internal table on PAI to check if there were values changed. Is there a reason why this error appears on this?
loop at it_values.
    chain.
      field pvalues-BEGDA.
      module CHANGE_QUEUE.
    endchain.
endloop.
Thanks.

No need to loop to check whether data is changed after PBO, just check System Field SY-DATAR, it will be set to 'X' if any field was changed.
So the following code is enough;
IF SY-DATAR EQ 'X'.
   PERFORM SAVE_DATA.
ENDIF.
Regards
Karthik D

Error in module program - Invalid field format( screen error )

In the module program i have added 1 input field named gv_pallet of 1 character. while processing the transaction when i put value 1 in this input field and press a button i am getting error ' Invalid field format( screen error ) .
I am not geting any clue whats the eror . can anyone able to tell me the error.
Point will be guranted .
Regards

No need to loop to check whether data is changed after PBO, just check System Field SY-DATAR, it will be set to 'X' if any field was changed.
So the following code is enough;
IF SY-DATAR EQ 'X'.
PERFORM SAVE_DATA.
ENDIF.
Regards
Karthik D

Error Invalid field format (screen error) in module pool

Hi
experts i am doing module in whichi had many check boxes on screen and each check box has function code means i want to do some thing else . but as i click the first or any other check box i get a error message
INVALID FIELD FORMAT (SCREEN ERROR).
Can anyody help me with this asnwers will be rewarded points .
regards

Dear Farukh,
can you please let me know how have you declared you check boxes.
how did you handle the click or the function codes in the user command module in your PAI.
The declaration of your fucntion codes can be done when you create your screen fields and then they need to be handled in the user command module i.e what you want to do when suppose you click on that particular check box.
Thanks
venugopal

Invalid field format (screen error)

We are using custom module pool report for displaying information. Information display in Table control which has also Radio button option for the further processing. After unicode conversion we are getting error while accessing the screen as "Invalid field format (screen error)" when user select Radio button. In production environment we are not facing any issue, but in Dev + Qas we have this issue. Nothing is changed as all environment are sync. To solve the issue we re-defined the Radion screen element, but no success we are still getting same error. I am not sure whether it is related to Page Format or something else. Could you please let me know whether anybody faced this issue ? For the information, I already searched on SDN and SNote, but there is no post or SNote

Have you checked if there are overlapping fields on the screen.
I've seen simular errors and usually it was beacuse of some change by SAP that made it so that the defined length of the screen field was suddenly to small.
I'm not saying that this is the case in your situation, but it never hurts to try and change the length of your screen field and see if that resolves the issue.
Arthur

Blu-ray Object: "Sept-Nov_2008", Error: "invalid format", Code: "14", Note: "ERROR: This stream does

I am trying to transcode a self contained FCP quicktime movie file and I get the message - Blu-ray Object: "Sept-Nov_2008", Error: "invalid format", Code: "14",
Note: "ERROR: This stream doesn't include Picture timing SEI, Unit Offset = 785835706". I am going to use quicktime pro 7 to import a quicktime movie instead of FCP self contained file into encore. But if anybody has any suggestions, please let me know. I have read about wrong field orders but I am using a custom preset with the field order set to upper (odd) - since I am using a Apple ProRes 422 (proxy) for the FCP sequence.

This thread might be helpful:
http://adobe.hosted.jivesoftware.com/message/3460426
-Ramesh

Dialog Screen - Invalid field format (screen error)

Dear all,
I have developed a modal dialog screen and succesfully invoked it with CALL SCREEN command in the main screen. Unfortunately, it always returns "Invalid field format (screen error)" when clicking on the dialog's GUI control such as button or radio button. Anyone encountered this before??
Regards,
KK

Hi KK,
Just make sure that the fields take on the screen are also declared in the top module of your program.
And also match their data-types and size i.e., declared in top module and on the screen in their respective attributes.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir

Search Help error : Invalid field format Screen error

Hi All,
I have attached a search help to contract field for contract no and item number. (in my own screen developed in a report)
The search help picks up data and assigns it to the fields,
But after this when I click on any other button, I get error saying :
<b>Invalid Field Format (Screen Error) !!!</b>
Any pointers guys !!!
Warm Regards,
Girish

screen checks in abapautomatically checks for format of field when u enter data....i.e date, integer etc...the problem in this case is that when u seelct a value using the help it is filling a value which is not the correct format...so check for the data types and test it again...this is definitely the problem.

Oracleasm lib failed to load with "Invalid module format" error

Hi,
I'm tring to install the oracleasm lib onto our hardened Redhat EL5 server
I've download the oracleasm rpm from this page http://www.oracle.com/technology/software/tech/linux/asmlib/rhel5.html.
We're using Redhat 5 U 2
[root@PG673 modules]# uname -rm
2.6.18-92.el5 x86_64
[root@PG673 modules]#
The package I downloaded is an exact match with our kernel version
[root@PG673 modules]# rpm -qa | grep asm
oracleasm-2.6.18-92.el5-2.0.5-1.el5
oracleasm-support-2.1.3-1.el5
oracleasm-support-2.1.3-1.el5
oracleasm-2.6.18-92.el5-2.0.5-1.el5
oracleasmlib-2.0.4-1.el5
oracleasmlib-2.0.4-1.el5
[root@PG673 modules]#
RPM installation went well, but when we run the /etc/init.d/oracleasm configure command, we hit the following error
[root@PG673 other]# /etc/init.d/oracleasm configure
/etc/init.d/oracleasm: line 207: /usr/sbin/oracleasm: cannot execute binary file
Later we found out that the oracleasm module haven't been loaded, so we try to load it manually, but we hit the "Invalid module format" error.
[root@PG673 modules]# modprobe -l | grep asm
/lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko
[root@PG673 modules]# modprobe oracleasm
FATAL: Error inserting oracleasm (/lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko): Invalid module format
[root@PG673 modules]#
As I know this error could happen if the driver version is not match with the system kernel version.
The problem is we're already using an exact match version of driver with our system, I can't think of what to do next in order to proceed the installation.
Really appreciate if someone could point me a direction.
Thanks
Mike

Hi Mike,
something looks a bit strange for me. On my OEL 5.4 x64 system i have just the following 3 packages:
$ rpm -qa | grep asm
oracleasm-2.6.18-164.el5-2.0.5-1.el5
oracleasm-support-2.1.3-1.el5
oracleasmlib-2.0.4-1.el5 Your packages should be I think the following:
http://oss.oracle.com/projects/oracleasm-support/dist/files/RPMS/rhel5/amd64/2.1.3/oracleasm-support-2.1.3-1.el5.x86_64.rpm
http://otn.oracle.com/software/tech/linux/asmlib/files/RPMS/rhel5/amd64/2.0.4/oracleasmlib-2.0.4-1.el5.x86_64.rpm
http://oss.oracle.com/projects/oracleasm/dist/files/RPMS/rhel5/amd64/2.0.5/2.6.18-92.el5/oracleasm-2.6.18-92.el5-2.0.5-1.el5.x86_64.rpm
Uninstall all asm packages and retry with just those three.
Good luck!
Cheers,
David
OCP 9i / 10g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

AD 11g Trusted Recon is failing due to invalid Date format for Start Date

We are using OIM 11g with AD 11g connector.
we have mapped "whenCreated" attribute of AD to "Start Date" in OIM. We ran Trusted Recon, the recon failed due to invalid date format.
we got the following error :
Caused By: oracle.iam.reconciliation.exception.InvalidDataFormatException: Invalid data - 10/19/2012 10:33:30 AM against Date format yyyy/MM/dd HH:mm:ss z for key Start Date
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.convertReconFieldsToOIMFields(ReconOperationsServiceImpl.java:1610)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:548)
at oracle.iam.reconciliation.impl.ReconOperationsServiceImpl.ignoreEvent(ReconOperationsServiceImpl.java:535)
at sun.reflect.GeneratedMethodAccessor9326.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:25)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
Thanks.

Caused By: oracle.iam.reconciliation.exception.InvalidDataFormatException: Invalid data - *10/19/2012 10:33:30 AM* against Date format yyyy/MM/dd HH:mm:ss z for key Start Date
Error is because of invalid date format.
You need to bring data in required format. As I remember you can configured it in one of the AD configuration lookup.

Invalid Alias Format : Table_name.Column_name required error

Similar Messages

Maybe you are looking for