Invalid Checksum

I have tried to down load this Combo 1.4.4 5 times, doing the permissions dance before the download. Everytime the checsum comes back as invalid. and of course no further operation is possible
This is on 2 machines. A brand new PB 17 inch 1.67 with 2 gigs of Apples ram installed and 2 weks old.
The other a faithful Pismo with 1 Gig of ram. I have tried it over airport and using a cat5 direct off the DSL modem. Everything else downloads just fine.
So whats up with this, ????
Not sure I really want to install it, but getting the correct checksum is a bit of necessity to make that choice
The download shows about 120 megs in the combo. Mine seems to top out at 115 megs and then goes into disk image, each time the same deal.
I am tempeted to just stay away but there are some major fixes. Any ideas
Cheers
Geoffrey
2 Pismos. 2 G4 1.3 ghz iBooks to many PBs Mac OS X (10.4.3)

No I have not tried Tech Tool, I thought those days were over ??? No need to use them as the OS took care of it's self as long as permissions were used before and after. Plus the Sunday haul out the trash. I see so many freeware or shareware tools, but have not liked any that I have seen and do not trust them.
Things are moving so fast with these 120 meg updates that I do not know if anyone can keep up with it. Not a knock on the developers of shareware, just a little too geeky for me with my limited work with UNIX. Now OS 9 I knew that very well. Just want the thing to work. I usually lay back a week or 2 and let the beta testers ship the reports back in then download.
I did upgrade my Extreme base station which Software update did not catch and after that is when the G4 took the update through SU. Was surprised to see a few things that S.U. was not picking up.
Now on my new G4 PB I just got said the heck with it and used software update and it worked. How well? That we shall see but it loaded and so far no crashes. I did a little web searching on the G4 but the pismo is my life line for now so no tricks until the kinks are worked out of this. It just takes some time and they can not know how every machine will respond.
It just did not like the combo stand alone, so was surprised when the G4 took it. Still leaves the Pismo. I guess when I get everything to a hard drive I will venture further
Thanks for the Tech Tools, I see a little advertisement but most responses seem to say why the OS does this for you.
You use and recommend one over the other. I used to have both on my 9s, still do. But always willing to learn
Thanks
Geoff
2 Pismos. 2 G4 1.3 ghz iBooks to many PBs Mac OS X (10.4.3)
2 Pismos. 2 G4 1.3 ghz iBooks to many PBs Mac OS X (10.4.3) PB 1.67 17 inch

Similar Messages

I'm having trouble installing 4.4 due to error, "invalid checksum"

I have a new iMac, but same problem was happening on my macbook. Every time I try to install 4.4, I get this error. I even unselected validate checksums in disk utilities, still failed to install.
this file is referenced with the "invalid checksum" error.....Lightroom_4_LS11_mac_4_4(2).dmg
Thanks for any help you can provide.
Chris

Download it again.

OS UPDATE / Invalid Checksum / Appstore / Main Apple web page

Hi.. I know this conversation closed many months ago but I am having the same problem. I have just turned on one of my Macbooks and it indicated via the MacStore that I needed the recent update of IOSX software. Currently I am running 10.8.2... and it showed that I needed the new update of 10.8.3
I clicked on the download button and after download it came back with a message to say the file had been corrupted during download. I tried to download it again via the App Store but it then said that there are no current updates or all updates are current. I checked to make sure that the existing software had not updated and it had not. So I went to the Apple webpage where you are able to download files directly from the site. http://support.apple.com/downloads/
I then tried to download the 10.8.3 combo software... After about 35 mins I tried to install it from the Download file
After validating the file which is normal.. It cam back with an error - "Invalid Checksum" So I deleted the file from downloads and tried again.... Same thing...
I then tried to download the smaller update file (the one below in the image) -
Less time to download but came back with the same error.
So in short I am unable to download this update... I am getting the same error message "Invalid Checksum" when I use either the AppStore or the main Apple software update page on the web..
Anyone suggest anything? I have tried to download this a couple of times now and am getting the same results.
Appreciate any help or advise.

Interesting. I went to apple.com and dragged the url to the dock. There is a clickable space created, which displays "Apple" when you hover over it. I can click on it successfully, as you say. And I can drag it off the dock as usual. But there is no icon! I tried a couple of other websites -- same result!
A small bug, I guess.
This behavior persists in all my user accounts.
Can others confirm?
charlie

ERROR: invalid checksum in data file (log file SAPDOKCL.log)

Hi All,
I am trying to install SAP4.7 IDES on Windows 2003 server with oracle9.2 as database
I am getting this error from a long time. Let me know how to troubleshoot this.
I have replaced the Export file 5 with a new one but agin the same error
Thanks in Advance
Rakesh
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100131032746
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ERP\SYS\exe\run/R3load.exe -ctf I E:\Exports\51019635_1--export5/DATA/SAPDOKCL.STR C:\SAPinst/DDLORA.TPL C:\SAPinst/SAPDOKCL.TSK ORA -l C:\SAPinst/SAPDOKCL.log
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: job completed
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100131032746
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100131032808
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst/SAPDOKCL.cmd -l C:\SAPinst/SAPDOKCL.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora92 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=014C5914,svrhp=014C7B4C)
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance erp is running on PAO with ORACLE version 9.2.0.1.0 since 20100131
Sun Jan 31 03:28:14 2010
***LOG BZA=> table SVERS      does not exist on database [dblink#1 @ 1292] [dblink 1292 ]
(DB) INFO: connected to DB
(DB) INFO: DOKCLU created
(RFF) ERROR: invalid checksum in data file "E:\Exports\51019635_1--export5/DATA/SAPDOKCL.001"
             current table was "DOKCLU"
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=014C5914,srvhp=014C7B4C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100131033807
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100131093619
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst/SAPDOKCL.cmd -l C:\SAPinst/SAPDOKCL.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora92 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=014C5914,svrhp=014C7B4C)
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance erp is running on PAO with ORACLE version 9.2.0.1.0 since 20100131
(DB) INFO: connected to DB
(DB) INFO: DOKCLU deleted/truncated
(RFF) ERROR: invalid checksum in data file "E:\Exports\51019635_1--export5/DATA/SAPDOKCL.001"
             current table was "DOKCLU"
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=014C5914,srvhp=014C7B4C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100131094626
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: START OF LOG: 20100131103530
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
D:\usr\sap\ERP\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst/SAPDOKCL.cmd -l C:\SAPinst/SAPDOKCL.log -stop_on_error
DbSl Trace: Got ORACLE_HOME=D:\oracle\ora92 from environment
DbSl Trace: Client NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Logon as OPS$-user to get SAPERP's password
DbSl Trace: Connecting as /@ERP on connection 0 ...
DbSl Trace: Attaching to DB Server ERP (con_hdl=0,svchp=014C5914,svrhp=014C7B4C)
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: ORA-1403 when accessing table SAPUSER
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Now I'm disconnected from ORACLE
DbSl Trace: Try to connect with default password
DbSl Trace: Connecting as SAPERP/<pwd>@ERP on connection 0 ...
DbSl Trace: Starting user session (con_hdl=0,svchp=014C5914,srvhp=014C7B4C,usrhp=014D0304)
DbSl Trace: Now I'm connected to ORACLE
DbSl Trace: Database NLS settings: AMERICAN_AMERICA.WE8DEC
DbSl Trace: Database instance erp is running on PAO with ORACLE version 9.2.0.1.0 since 20100131
(DB) INFO: connected to DB
(DB) INFO: DOKCLU deleted/truncated
(RFF) ERROR: invalid checksum in data file "E:\Exports\51019635_1--export5/DATA/SAPDOKCL.001"
             current table was "DOKCLU"
DbSl Trace: Disconnecting from connection 0 ...
DbSl Trace: Closing user session (con_hdl=0,svchp=014C5914,usrhp=014D0304)
DbSl Trace: Detaching from DB Server (con_hdl=0,svchp=014C5914,srvhp=014C7B4C)
DbSl Trace: Now I'm disconnected from ORACLE
(DB) INFO: disconnected from DB
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: job finished with 1 error(s)
D:\usr\sap\ERP\SYS\exe\run/R3load.exe: END OF LOG: 20100131104452

and to add: you're not following SAPs suggestions according to the installation guide.
> D:\usr\sap\ERP\SYS\exe\run/R3load.exe: version R6.20/V1.2
Kernel 6.20 is out of support already for a long time. You should get an updated installation CD with a 6.40 kernel.
> DbSl Trace: Database instance erp is running on PAO with ORACLE version 9.2.0.1.0 since 20100131
9.2.0.1 was never supported. If you read the installation you will notice, that you should install the database plus the latest patchset plus the latest interim patches before you continue with the installation.
Markus

Problems with the CS6 Master Collection disk image (invalid checksum)

I have problems downloading the trial for CS6 Master Collection for MacOS X.
I've tried downloading using the Download Assistant, both as a privileged and an unprivileged user, and have also tried the direct download as both privileged and unprivileged. Each time I've waited until the download was complete before trying to install, but every time the disk image fails to open, complaining of an "invalid checksum".
I've tried mounting the disk image without validating the checksum, but while I can then run the installer, the installation fails due to lack of privileges – again, this is regardsless of user privileges. I've also tried deleting the preferences and cache-files for Download Assistant, but to no avail.
Can anyone confirm that the english version of the CS6 Master Collecion disk image is working and can be mounted without error on MacOS X 10.7? I have now downloaded and re-downloaded the disk image at least eight times, and while I have a fast Internet-connection, this is getting tedious.

I just downloaded the DMG from Adobe.com using the trial and it mounts fine. I was able to start the installation.
I did not get a checksum error or any other error.
However, I found these instructions in another thread:http://forums.adobe.com/message/4370247#4370247
<quote>
If the download is completed in the Adobe Download Assistant you can temporarily turn off the feature to verify the checksum. The following steps will allow you to temporarily disable this feature:
Open the Disk Utility located in Applications/Utilities
Go under the Disk Utility menu and select preferences
Deselect the option to verify checksums
Try mounting your DMG file
I would recommend turning this feature back on though after the installation is complete. Also if you notice this happening on additional files it can indicate a problem with your Internet connection.
</quote>
Could you try these steps and let us know if you were able to proceed.

Flash Builder 4.7 Mac DMG Invalid Checksum

When I download the FB 4.7 for mac from here and try to open it on Mountain Lion I get an "Invalid checksum" error.
Here's the link I'm using once I login:
http://www.adobe.com/cfusion/entitlement/index.cfm?event=custom&loc=EN_US&sku=FS0003374&e= labs_flashbuilder4-7

Please validate the checksum of your installers against below values
flashbuilder4-7_p1_mac_082712.dmg
E9DBA2C8673E97A6A82C4F09382EEBCF
flashbuilder4-7_p1_win32_082712.exe
D62A9AF1D08EE6838E43B473ACC13BEE
flashbuilder4-7_p1_win64_082712.exe
42A96084BB12F481F17293548707E1FA
If the checksum values of the installers you have downloaded are correct, then please run CS cleanup script to clean the earlier installations http://www.adobe.com/support/contact/cscleanertool.html

I'm trying to open the trial of CS6. I get 'invalid checksum.' What can I do?

I'm trying to open the trial of CS6. I get 'invalid checksum.' What can I do?

You can also review Downloading a purchased Adobe product - http://forums.adobe.com/thread/1006208?tstart=0. Which lists several steps which can be performed.

Invalid Checksum when trying to update MAC OS X 10.6.4

Hi all. I own a 15 inch laptop mac i purchased in 2009. I have recently realised that my MAC software has not been updating or installing correctly. I tried to manually download the software 10.6.5 ( as i currently have 10.6.4) and it came back with an invalid checksum error. I retried the download several times and got the same error. I also tried other downloads and also got the invalid checksum error. (.DWG files).
Another thing that seemed strange was that i had been trying to download 'star walk app' for my iphone and also a jamie oliver recipe app however these files seemed to keep restarting their download due to errors.
I have done some research and the possible issues i have come across are:
- possible internet connection error. This doesnt seem to be the problem as i can stream youtube etc with no issues..
- possible RAM error. How do i check this is the problem without purchasing new RAM chip?
- corrupt download. Cant be this due to all my files being corrupt.
Can anyone help me further with trying to solve this issue?
I have been so happy with changing to the Apple life and now i am starting to regret it as i am finding it near impossible to repair my laptop....
Any help is appreciated, Thanks

If you think your Mac is having hardware problems, I'd run the diagnostics that came with your Mac. If the diagnostics came on a separate disc, run them by holding down the "C" key while booting with that disc in the drive. If you only have one "system restore" disc, hold down the "D" key while booting with that disc in the drive.

Invalid checksum for iTunes? ... can't download large apps?

I've noticed two things.
First, I've tried to download iTunes 11 from both the app store and a straight download, and, both ways (and every time -- 7 tries now), I get an invalid checksum. I've downloaded from Chrome; I've downloaded from Safari. I can't imagine the source is the problem, so what's happening there? My network connection seem otherwise solid, based on my ping rate to California, and standard web use.
Secondly, iTunes 10 won't download large apps. Neither the 'Magic the Gathering' update or the 'Grand Theft Auto: Vice City' app will download. (Both of those weigh in at over a gig.) At some point during the download, I get the warning, "An unknown error occurred (-50)." Smaller apps seem fine.
This is with a late 2008 13-inch Macbook Pro running 10.8.2.
Help? ... and thank you!

Just need to find a way to get a hold of someone who can fix this.

Premiere Elements 12 invalid checksum

I have just downloaded Elements 12, then I clicked on Install...it goes through then a message comes up saying disk images couldn't be opened due to an "invalid Checksum"
How do I fix this?
I have seen this problem on other products and my internet connect, my Wifi, is very strong..all bars on my macbook are black.
So I'm not sure what the problem is.

Iregis13
Did you download Premiere Elements 12 Mac from Adobe or from some place else? Is the download a tryout or purchased?
Have you tried the uninstall/reinstall?
Cant install premiere elements cd or online trial on Mac
Please read through the suggestions for "Invalid Checksum" offered in a Photoshop Elements issue.
None of them worked for that users, but one of them, especially the one from Adobe Staff, might work for you.
Re: Can't install photoshop elements 10 on Mac OS X 10.9.2...
If you need to get an alternative source of download files, please see the following web site
http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
It is critical that you read and carry out the web site's "Note: Very Important Instructions" and "here" in order to avoid an Access Denied message.
Are you saying that you have tried to install other video editors on your Mac and have run into the same error? Or are you just reading about other
reports of "Invalid Checksum".
ATR

Invalid Checksum Error for Photoshop Elements 10 installation

I have tried installing Photoshop Elements 10 on my Macbook but I got an "invalid checksum" error (saying that the following disk images couldn't be opened). Was there a previous solution to this type of problem?

That response is not at all helpful. I have no idea what you were referring to, but there is no pale yellow bar at the top of the forum when I am looking at it now.
In the future, consider posting a URL or something else that will continue to be relevant and useful in a persistent way. Perhaps typing a sentence or two about what's going on if you know. If it seems obvious to you, that doesn't mean it will be in the future to others having the same problem.

INVALID CHECKSUM: Motorola SBG6580 wireless modem router and software updates (10.7.4)

Tried to install 10.7.4 via software update dropdown on my MacMini over ethernet on my home computer network, failed. Downloaded Combo Client 10.7.4 update from apple.com. Downloaded fine. Failed to mount with invalid checksum error. Tried to download on Win7 Dell laptop on my same home network via Wi-Fi, and copied to MacMini via USB flashdrive. Copied ok, but mounting returned invalid checksum again. Went to work, downloaded Combo Client 10.7.4 onto USB flashdrive, came home, copied it, mounted and installed just fine!
So, kept trying to download Combo Client from apple.com on my home MacMini. Kept failing, invalid checksum. Did this about 20 times during a few days, and actually got two of them to mount without the checksum error. Realized that something in my network was failing, intermittently.
Figured at this point it was either the Motorola SBG6580 modem wireless router or Comcast cable ISP service.
Went to best buy and bought a new Motorola SurfBoard SBG6580. Installed it, provisioned it with Comcast. Took about 20 mins with Comcast pushing over the same new Motorola firmware that was released in MID FEB 2012. I think it is 3.3.1. Tried to download Combo Client and invalid checksum again. Installed a new Motorola SurfBoard SB6121 modem (which has a very different firmware BTW) and it download and mounted the Combo Client 10.7.4 update just fine!
Realized it was the firmware that was causing it, not a broken modem.
Comcast pushes over cable automatically new firmware that is given to them by Motorola. Apparently no did a thorough check large DMG files that require a checksum and it is therefore somehow corrupting them when downloading. Earlier this year the firmware was updated 3.1 to 3.3.1 then Comcast pulled it and downgraded all SBG6580 back to 3.1. Then in mid Feb they reuploaded 3.3.1 firmware. That is the one causing the problems.
You can either wait it out till they push a new one that fixes it, and have all your large DMG files transferred from another internet connection and copy them over, or just get rid of that horrible SBG6580. That is what I did and now using a Motorola SB6121 modem with a Cisco EA2700 wireless routher.
Let me know if any of you are also experiencing this issue and if/when Comcast/Motorola will fix it.

No, nothing custom that I did. Besides turning off the WPS thing as a possible security problem (we dont need it anyway) and setting the wireless passwords/SSID/channel stuff, everything is as it was factory or changed by Comcasts profile.
It's obvious if you replaced the SBG6580 with a two-peice combo and the problem went away, that it seems to be with the SBG6580. Just weird to me becuase a problem like that would almost seem more like a hard disk or web browser problem. TCP/IP has a checksum/retransmission layer or protocol built in, if short or defective packets show up, they would be sent again.
I mean I've seen like cheap 24 port 10/100mb switches running at 100% throughput, to the point they reboot. Anything connected to them stops or slows down but generally get going where they left off, unless the connection got severed.
I'm just saying a bad iso or dmg file, had to had bytes changed or missing, like the web browsers buffer or a bad block write on the disk drive saving it. There was a lot of talk about the SBG6580 on dslreports and comcast discussion groups, would be interesting to see if anyone else mentioned it for that model.

As5300 - invalid checksum file removal from flash:

I am having as5300.In the flash: of it there are number of invalid checksum files.How to remove these files without erasing the entire flash.Following is text of show flash:
System flash directory:
File Length Name/status
1 373849 mica-modem-portware.2.5.1.0.bin
2 446464 mica-modem-pw.2.9.4.0.bin [invalid checksum]
3 446464 mica-modem-pw.2.9.4.0.bin [invalid checksum]
4 458752 mica-modem-pw.2.9.4.0.bin [invalid checksum]
5 454656 mica-modem-pw.2.9.4.0.bin [invalid checksum]
6 468529 mica-modem-pw.2.9.4.0.bin
7 450560 c5300-i-mz.120-7.T [invalid checksum]
8 458752 c5300-i-mz.120-7.T [invalid checksum]
9 458752 c5300-i-mz.120-7.T [invalid checksum]
10 4826368 c5300-i-mz.120-7.T
[8843792 bytes used, 7933424 available, 16777216 total]
16384K bytes of processor board System flash (Read/Write)
Delete command removes only valid file in the flash:
Squeeze not supported on as5300
Regds,
prasanna

Check out the following steps :
Step 1 : Delete a file on a Flash device.
delete [[m/]device:]filename
Step 2 : If desired, permanently remove all deleted files on the Flash device (this operation can take a number of minutes to complete).
squeeze [m/]device:
Step 3 : Verify the files are deleted.
dir [[m/]device:][filename]
Else try the command - erase flash - for Erasing deleted and invalid files from flash

MacBook error - invalid checksum

On my MacBook I attempted to download trial version of Photoshop cs6 during the night and received this error message this morning: Photoshop_13_L516.dr invalid checksum
In searching for the fix there are many, many problems with this download. We have our own DSL - AT&T router. I can not find the graphics in the energy preferences to disable as one person suggested. What exactly must I do? I will purchase Photoshop cs6 but would like to look at the differences between Photoshop and Photoshop Extended first. Thank you.
Mac OS X 10.6.8
Processor 2 GHz Intel Core Duo
1 GB 667 MHz DDR2 SDRAM

Where did you choose to download the install files too? I would recommend trying the download again but choosing the default location of the User folder.

Photoshop trial - invalid checksum

iMac 2.4GHz Core 2 Duo
OS X 10.6.8
4Gb ram
>900Gb free
I've downloaded the trial 4 times now, different times of the day. Keep getting invalid checksum after downloading. Disk Utility is unable to verify, with the exact same CRC32 on the last three files (I deleted the first one). Same errors every time:
From the CRC it looks like I get the exact same file every time.
I routinely download >1Gb files daily, >8Gb files weekly (on another computer) and checksums match. Should prove my ISP/Internet connection is not to blame as one suggested solution (use another ISP). I could use that computer to do the download but it's Windows and I want the the Mac version.
IS THERE A DIRECT LINK TO DOWNLOAD THE TRIALS?
I've reset Safari, I've deleted ADA prefrences and cache, I've cold booted, I save the file in different locations in my user folder, still get the same CRC each time.

Ramfade you mentioned you have removed the preferences and cache. Can you please confirm if you have completed the steps listed in Solution 1 of Troubleshoot Adobe Download Assistant - http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html#main_Solutio n_1.
I ran into this issue when a download was interrupted unexpectedly. Once I completed the steps in solution 1 and reinitiated the download I was able to download the trial successfully.
You might also want to try a wired connection or a different Internet connection while trying to download. Perhaps there is a server between you and the download server which is causing your difficulties at the moment.

Invalid Checksum when trying to use Seagate Backup Drive for Time Machine

Hi,
I'm trying to use a Seagate Backup Plus Drive with my Mac. It was originally used with a Windows machine. It does have the Seagate Dashboard Installer.dmg file. When I try to install it, it gives me an "invalid checksum" error.
I've also opened it in Disk Utility and attempted to reformat it into the Mac OS Extended (journaled) format, but it says it could not unmount the disk. I cannot see that it has any opened files that would be causing this problem. Any suggestions?
Thanks!

Tim,
I just switched from Entourage to Mail (for many reasons). Thus far, I love Mail. You may want to get the Widescreen plugin for it if you like the three-pane configuration of Entourage.
You should also be careful with Address Book if you have syncing set up in Entourage. In other words, probably should turn it off, along with any daemons you may have running. I lost data twice (once before my very eyes!) until figuring this out. Used Time Machine to restore a previous address book with all my contacts.
Thanks for the other information on this thread. Since I should be upgrading my old external drive anyway, it will help in purchasing a new machine for use with TM.
Message was edited by: SPD

Invalid Checksum

Similar Messages

Maybe you are looking for