"Invalid CMS Connection" Error during DS 4.2 SP2 Installation

Hi Everybody,
  Can anyone shed the light on the following dead end issue we are facing during Data Service 4.2 SP 2 Add On the EXISTING BOBI 4.1 SP2
  ( compatibility is confirmed by SAP through OSS Incident).
  Environment :
  Existing  Distributed Architecture of BOBI 4.1 SP 2 i..e CMS DB Oracle on One Host and BOBI 4.2 SP2 on Another Host
  Adding :  Data Services 4.2 SP2 on Separate Host
  OS :  Linux RED HAT 6.3 (VMware)
  At the initial Information Gathering Phase of   Data Services Installation I  face the following issue at the section of  " Enter CMS Name " :
   - We entered Physical / Virtual server name   with and without FQDN  i.e. Current CMS Host
   - Next is Admin and Password  i.e. Administrator and Password of Existing CMS
We get the following System Response / Error :
Invalid CMS Connection Information.
Installer could not detect a running Data Services Administrator Service with
the specified CMS connection information.
and no valid local SIA node was found.
Installer can not continue.
Please fix this problem by:
1. Making sure a Data Services Administrator Service is up and running with the specified CMS;
2. or creating a valid local SIA node to point to the specified CMS.
  It seems this is Known Issue and I  see two notes :
1837296 - ERROR: No valid local SIA nodes exist for the given CMS connection information - Data Services 4.x
                   - Not applicable as this is for IPS based installation
1682686 - Cannot connect to the CMS during installation of Data Services or Information Steward
                   - This note suggests to enter the TEMP variable pointing to location of Log Files Storing the Installation Logs
                      accordingly we did set " export TEMP=/usr/sap/<SID>/BOBI  "  as Temp variable but same error persists with the same message !!
                   - This note says valid for " DS 4.1 "
                         ..seems SAP Fall behind with the Rapid Frequency of  DS Releases and even in this note there's extremely brief so called solution
                         ...Defining TEMP should solve this issue in this case as per the note but, it is not solving issue at all !!
In addition to define TEMP Variable to resolve this, following verification, further attempts are made to fix it :
#1. I am able to ping from Data Services Host to CMS Host and there's no Firewall blocking this connection
#2. Using IP in place of  Host Name ( FQDN or without FQDN ) does NOT resolve
#3. With Administrator / Password mentioned - log in is possible
#4. Added entries in /etc/hosts of CMS Host and in DS Host ( cross entries )
#5  There's a Thread -
              http://scn.sap.com/thread/3469916 -- and as per that following sap note 1682686 resolves this specific issue but, in our case it does not !
In short : as of now we are at dead end  !!
Pl. share your knowledge, inputs - Thanks.
Thanks,
Regards,
- Ishan

Hi Amit,
Thanks for the suggestion - telnet to CMS Host is successful.
I see the following entries in /tmp - file :
=======================================================================
//verify dataservices installation begin
CMS_CONNECTED=true
CMSVersion=14.1.0
BuildNumber=1278
DS_INSTALLED=false
//Local server hostname is : ITSBEBEL00<local_ds_host>.XYZ.COM
//SI_SERVER_NAME for EnterpriseNode is : <cms_host>.XYZ.COM
NODE_LIST=
IS_ADMIN=true
The service DS.AdminService could not be found on the client side (FWM 02027)
com.crystaldecisions.sdk.pojomgr.axis2.internal.Axis2ServiceMgr.findService(Axis2ServiceMgr.java:193)
com.crystaldecisions.sdk.pojomgr.axis2.internal.Axis2ServiceMgr.makePOJO(Axis2ServiceMgr.java:83)
com.crystaldecisions.sdk.pojomgr.internal.POJOMgr.makePOJO(POJOMgr.java:35)
com.crystaldecisions.sdk.framework.internal.EnterpriseSession.getService_aroundBody14(EnterpriseSession.java:347)
com.crystaldecisions.sdk.framework.internal.EnterpriseSession.getService(EnterpriseSession.java:1)
com.crystaldecisions.sdk.framework.internal.EnterpriseSession.getService_aroundBody16(EnterpriseSession.java:364)
com.crystaldecisions.sdk.framework.internal.EnterpriseSession.getService_aroundBody17$advice(EnterpriseSession.java:512)
com.crystaldecisions.sdk.framework.internal.EnterpriseSession.getService(EnterpriseSession.java:1)
com.businessobjects.di.install.CMSConnect.getDSAdminService(CMSConnect.java:244)
com.businessobjects.di.install.CMSConnect.main(CMSConnect.java:321)
DS_AdminService_Installed=false
RETURN_CODE=2
//verify dataservices installation end
====================================================================
It is puzzling that without the completion of Data Services Installation why the DS Installer is expecting ' DS.Admin services " running on 'client' ...this is an extension or add on of Data Services (to be installed on separated linux host) and communication is supposed to be from DS Host to CMS Host !! Where is the scope of client here ??
We do see that connection to CMS Host is possible ..I found few more notes related to this ( not for the identical OS+DB+DS ver. i.e. Linux+Oracle+DS 4.2 SP2)  e.g. 1824068, 1632561 but, none of it helps to resolve the issue.
Thanks,
Best Regards,
- Ishan

Similar Messages

  • Hal.dll error during/after Win XP SP2 installation

    At the moment I'm trying to install Win XP (SP2) into a bootcamp partition. I have a Mac Pro with 4 HDDs.
    HDD1: OSX
    HDD2: free
    HDD3: OSX Data (raid 1)
    HDD4: OSX Data (raid 1)
    The setup I'd like to have is:
    HDD2:
    (1) Bootcamp-Partition (NTFS ~75GB)
    (2) Bootcamp-Scratch (NTFS ~150GB)
    (3) Scratch (HFS+ ~250GB)
    I partitioned the disk that way (with FAT32 instead of NTFS) and booted from the Windows install disk. The installer starts, reformats disk (1) to NTFS and copies data onto the disk.
    After the first reboot it breaks with hal.dll error. The files are on the disk but boot.ini seems to be corrupt. The "bootcfg" command from the recovery console is not working - it only duplicates the wrong entry in boot.ini.
    After the third non-working installation I tried to move the Bootcamp-Partition into the middle, OSX in front:
    (1) Scratch (HFS+ ~250GB)
    (2) Bootcamp-Partition (NTFS ~75GB)
    (3) Bootcamp-Scratch (NTFS ~150GB)
    Same error.
    Any hints on howto do that? Or will I have to move the Bootcamp-Disk to the end? How to succeed in having the Bootcamp-Scratch as 'D:' in Windows if I swap those two partitions?
    BTW: I succeeded to install WinXP on the same disk before. Back then I only had a 75GB Bootcamp-Partition on the disk (no other partition) and had the disk in Bay 3. But I moved it to Bay 2 because of performance problems in Bay3/4 (PIO-mode) and don't want to waste 400GB in the future .

    First of all I believe this is not the right place to discuss the issue. This issue is related to the Windows operating system file corruption and I think the physical location of the hard drive is not the cause of the issue.
    The hal.dll file is a system file which holds the hardware access layer information and linking the necessary components. This include the information about all the hardware resources for the operating system. What you had done to change the hardware configuration files in the boot.ini looks ok. Also you can try this link.
    http://shanegfowler.wordpress.com/2007/01/10/missing-haldll-error-corrupt-bootin i-file-quick-fix/
    Hope that helps you........

  • Data services - invalid CMS connection information

    Hi,
    I am installing Data services 4.1 on one server and trying to connect cms which is another server.
    When i enter the username and password of the cms server during the installation. i get the below error.
    "you cannot proceed as the following has failed validation :invalid CMS connection information.
    Please check the CMS connection inforamtion."
    Please help.
    Thanks,
    Rajiv

    Hello,
    The issue was resolved by imnplementing the note 1682686.
    In the next screen, it is asking for the local repository connection
    Repository name for CMS registry:
    Oracle Db connection name:
    Db server name:
    Database port:
    SID
    USer id:
    Pwd:
    I get an error
    You cannot proceed because the following has failed validation:
    Invalid Data Services Repository Connection information
    BODI-320006:cannot open connection to the repository.The error mesage from the
    underlying DBMS is <OCI call<OCIServerAttach> for connection <YYY> failed:
    <ORA -12154:TNS:could not resolve the connect identifier specified>.
    The db server is on a seperate host.
    Thanks,
    Rajiv

  • BI Composer - Error of Invalid BIPS Connection error

    Hello Experts -
    When we select the subject area to create analysis in BI composer then we get "Invalid BIPS Connection" error.
    This mught not be related to BI COmposer.
    Could you help us here in debugging this issue.
    Thank you!

    Hi
    I too facing same error in obiee11.1.1.6.2Bp1 version
    Earlier Its working fine inOBIEE11.1.6.0 version and just now upgraded into obiee1111621 then the bi composer throwing bi composer invalid connection
    I just Confirming below I did
    1.Instanconfig file bi composer tag enable as true
    2. Extending oracle.bicomposer.template.11.1.1 etc by using weblogic configuration wizard and odbc configured
    3. Fmw em update ( host,port,user,password etc on System MBean configuration
    4.) also tried to install that bicomposer script file via command prompt still it's not working
    Note:bi comppser obiee11.1.1.6.0 version was working fine for me
    My current setup having ssl and I am on windows ..already checked oracle not and some blog but no luck ..
    Edited by: Devarasu on Aug 31, 2012 1:30 AM

  • E63 - Connection Error during calls AND trying to ...

    Hi,
    Wonder if anyone has had this problem.  A while ago I noticed that if I used say google and then went onto a website, it'd try go go into the website then knock me back to google.  A while after that during phone calls I'd be chatting away but the line would suddenly go dead and a message would say "connection error".  This may be after 8 or so minutes, but sometimes after only a minute or two. 
    I've tried turning off, taking out battery and SIM and turning back on and today went to the Three Store where I got it and we tried a new SIM card.  But it's still happening. 
    Is this a problem anyone can help with please or does it sound like there's a problem with my phone?  Three have said if the new SIM didn't work they'd send it off to Nokia who won't charge if there is a problem with the actual handset but if they can't find a problem they'll charge me!  Does this sound like a handset problem does anyone think?
    I'd be REALLY grateful for any advice as it's driving me mad!!
    Thanks in advance. 
    Becky

    Go to Tool>> Settings>> Phone>>Network
    Pick GMS.
    That should fix your problem. I was stuck in that Connection Error thing for days. Took it to the Nokia Care Center but all they did for the fee I paid was to update the firmware (which I could do at home myself). I was searching everywhere for a solution and among all the advice to reset or firmware install or turn on and of and take out SIM/battery, etc., That GMS thing really works.
    Hope it helps

  • RFC Connection Error during Web AS ABAP Database Instance

    I keep getting RFC Connection error installing the database instance.  The following are the pertinent logs:
    INFO 2007-05-09 20:10:04
    Working directory changed to C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB.
    INFO 2007-05-09 20:10:04
    Output of C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat" is written to the logfile r3trans.exe.log.
    INFO 2007-05-09 20:10:22
    Execution of the command "C:\usr\sap\X22\SYS\exe\run\r3trans.exe -u 1 -i "C:\Program Files\sapinst_instdir\NW04\SYSTEM\ABAP\MSS\UC\DB\mssprocs640.dat"" finished with return code 0. Output: This is C:\usr\sap\X22\SYS\exe\run\r3trans.exe version 6.13 (release 640 - 03.06.05 - 17:04:00).unicode enabled versionC:\usr\sap\X22\SYS\exe\run\r3trans.exe finished (0000).
    INFO 2007-05-09 20:12:23
    RFC parameter CLIENT set to value 000.
    INFO 2007-05-09 20:12:23
    RFC parameter USER set to value DDIC.
    INFO 2007-05-09 20:12:23
    RFC parameter LCHECK set to value 1.
    INFO 2007-05-09 20:12:23
    RFC parameter PCS set to value 1.
    INFO 2007-05-09 20:12:23
    RFC parameter LANG set to value EN.
    INFO 2007-05-09 20:12:23
    RFC parameter ASHOST set to value cix22.
    INFO 2007-05-09 20:12:23
    RFC parameter SYSNR set to value 00.
    INFO 2007-05-09 20:12:23
    RFC connection information checked successfully.
    ERROR 2007-05-09 20:12:24
    FRF-00007  Unable to open RFC connection.
    I tried the following fixes spread across different threads in this Expert Forums:
    1. Someone said network problem.  I rebooted, restarted the install and even redo it. 
    2.  Another suggestion was to use caps on the password.  Didnt work.
    3.  One suggestion was to update the keydb.xml file.  However, I could find such property name:
    search for the table t_SAPComponent_SAPSystemLogon_SHARED
    then look for <fld name="pPW">, <properties>,
    <property name ="GUIENG_USER_INPUT" and set the value
    "GUINEG_TRUE" to "GUIENG_FALSE".
    4. I even used the ddic password 19920706 which is supposed to be the default.
    5. Restarted the instance and applied all the fixes above.
    Does anyone know what is going on base on the logs above?  Thanks.

    try moving all your install disk onto local file system then rerun the install. That might work....

  • "Invalid Drive I:\" error during iTunes installation. What do I do now?

    Can't install iTunes on my pc. Keep getting "invalid Drive I:\" error.
    I have no drive I:\. I have C:, D: and P:(external drive).
    I have downloaded iTunes a couple of times but none work.
    I am using an HP DV6700 with windows 7.
    Help, please.

    Let's try the following user tip with that one:
    "Invalid drive X:\" install errors

  • Invalid data status error during the data extraction

    Hi,
    while extracting capacity data from the SNP Capacity view to BW. i get the "invalid data status error" and the data extraction fails.
    when debugged the bad requests of the ODS object, i found that for a certain product(which has both positive and negative input and out qtys) co-product manufacturing orders were created. but this product was not marked as the co-product and functionally its fine.
    how can i rectify the data extraction problem..can you advice.
    Thanks,
    Dhanush

    Sir,
    In my company for some production order status some are having "errors in cost calculation" ie "cser" .how to deal these kind of errors.

  • Error during solution manager 3.2 installation.

    Hi !
    I am getting the error in solution manager 3.2 installation . I am doing installation using system copy / backup restore method .
    Getting ther following error -
    "CJS-00084  SQL statement or script failed. DIAGNOSIS: Error message: SP2-0310: unable to open file
    "CONTROL.SQL"ORA-01012: not logged onORACLE instance started."
    Kindly suggest the solution.
    Regards-
    sanjay

    hi Markus!
    The ora_sql_results.log file shows the following-
    "2007-06-07, 18:32:21 SAPINST ORACLE start logging for
    connect  /  as sysdba ;
    CONNECT / AS SYSDBA
    SHUTDOWN ABORT
    @CONTROL.SQL
    SHUTDOWN IMMEDIATE
    STARTUP MOUNT
    ALTER DATABASE ARCHIVELOG;
    ALTER DATABASE OPEN;
    EXIT
    exit;
    Output of SQL executing program:
    SQL*Plus: Release 9.2.0.6.0 - Production on Thu Jun 7 18:32:21 2007
    Copyright (c) 1982, 2002, Oracle Corporation.  All rights reserved.
    Connected.
    Connected.
    ORACLE instance shut down.
    SP2-0310: unable to open file "CONTROL.SQL"
    ORA-01012: not logged on
    ORACLE instance started.
    Total System Global Area  546906764 bytes
    Fixed Size               455308 bytes
    Variable Size            293601280 bytes
    Database Buffers       251658240 bytes
    Redo Buffers              1191936 bytes
    ORA-00205: error in identifying controlfile, check alert log for more info
    ALTER DATABASE ARCHIVELOG
    ERROR at line 1:
    ORA-01507: database not mounted
    ALTER DATABASE OPEN
    ERROR at line 1:
    ORA-01507: database not mounted
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
    With the Partitioning, OLAP and Oracle Data Mining options
    JServer Release 9.2.0.6.0 - Production
    SAPINST: End of output of SQL executing program E:\oracle\SMP\920/bin/sqlplus.
    SAPINST found errors.
    SAPINST The current process environment may be found in sapinst_ora_environment.log.
    2007-06-07, 18:32:28 SAPINST ORACLE stop logging"
    What to follow... pls guide
    Regards-
    sanjay

  • "is an invalid session name" error during publishing in workshop

    Hello, I use OSB workshop and WebLogic server.
    When I publishing my project I get error:
    javax.management.RuntimeMBeanException.java.lang.IllegalArgumentException: is an invalid session nameI tried to reinstall domain but there is the same result.
    Thank you for ahead for any suggestion.

    Have you checked Configuration Project -> Properties -> Oracle Service Bus Configuration -> Session name?

  • Getting invalid-attribute-value Error during Delta Import on Call-based ECMA2

    I'm developing an ECMA2 MA to which supports delta imports.  I have found very few samples of working code to do delta imports, so my attempts are created
    using a lot of trial and error... Any samples of working Call based MA's with delta support would be much appreciated :-)
    The data is located in a SQL server and the schema (for delta) is like this (simplified):
    EmpID string
    Status string
    UPDATESTATUS string (<-- This is the update column with values New/Update/Delete)
    For each EmpID, there may be multiple Status values, i.e. Status should be imported into a multi value attribute in FIM.
    For the full import this is working as expected, but I run into issues when attempting to do the delta imports
    The code for the delta import
    private
    GetImportEntriesResults GetImportEntries_Delta(GetImportEntriesRunStep importRunStep)
    GetImportEntriesResults importReturnInfo;
    List<CSEntryChange> csentries =
    new List<CSEntryChange>();
    string employeeID =
    null;
    string appStatus =
    null;
    string currEmployeeID =
    CSEntryChange csentry =
    null;
    List<string> appStatusList =
    new List<string>();
    string changeMode =
    for (int i = currentReadRecord; i <= da.Tables["AppStatus"].Rows.Count - 1; i++)
    if (currEmployeeID != da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(0).ToString().Trim())
    if (currEmployeeID !=
    "") // this should be true except for the first run
    csentry.AttributeChanges.Add(AttributeChange.CreateAttributeUpdate("IdentityStores", appStatusList));
    csentries.Add(csentry);
    appStatusList = new
    List<string>();
    if (csentries.Count >= m_importPageSize)
                  currentReadRecord = i;
    importReturnInfo = new
    GetImportEntriesResults();
    importReturnInfo.MoreToImport = (i <= da.Tables["AppStatus"].Rows.Count - 1);
    importReturnInfo.CSEntries = csentries;
    return importReturnInfo;
    changeMode = da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(2).ToString().Trim();
    csentry = CSEntryChange.Create();
    csentry.ObjectType = "ApplicationIdentity";
    employeeID = da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(0).ToString().Trim();
    currEmployeeID = (string)employeeID;
    switch (changeMode)
    case "New":
    csentry.ObjectModificationType = ObjectModificationType.Add;
    csentry.AttributeChanges.Add(AttributeChange.CreateAttributeAdd("EmployeeID", employeeID));
    break;
    case "Update":
    csentry.ObjectModificationType = ObjectModificationType.Update;
    csentry.DN = employeeID;
    break;
    case "Delete":
    csentry.ObjectModificationType = ObjectModificationType.Delete;
                         csentry.DN = employeeID;
    break;
    default:
    throw new
    UnexpectedDataException(string.Format("Unknown modification type: {0}", changeMode));
    appStatus = da.Tables["AppStatus"].Rows[i].ItemArray.GetValue(1).ToString().Trim();
    appStatusList.Add(appStatus);
    // save the last object
    if (csentry != null)
    csentry.AttributeChanges.Add(AttributeChange.CreateAttributeUpdate("IdentityStores", appStatusList));
    csentries.Add(csentry);
    importReturnInfo = new
    GetImportEntriesResults();
    importReturnInfo.MoreToImport = false;
    importReturnInfo.CSEntries = csentries;
    return importReturnInfo;
    The code compiles and executes, but the delta import fails with the "invalid-attribute-value" message per csentry.
    From the eventlog I have the following message
    The server encountered an unexpected error while performing an operation for a management agent.
    "System.InvalidCastException: Unable to cast object of type 'System.Collections.Generic.List`1[System.String]' to type 'System.String'.
       at Microsoft.MetadirectoryServices.Impl.Ecma2ConversionServices.AddAttributeToDImage(CDImage* pdimage, String attributeName, AttributeModificationType
    attributeModificationType, IList`1 attributeValueChanges, Int32 escapeReferenceDNValues)
       at Microsoft.MetadirectoryServices.Impl.Ecma2ConversionServices.ConvertToDImage(CSEntryChange csEntryChange, CDImage** ppDImage, Int32 escapeReferenceDNValues)
       at Microsoft.MetadirectoryServices.Impl.ScriptHost.InvokeExtMA_ImportEntry(UInt32 cBatchSize, UInt16* pcszCustomData, UInt32 cFullObject,
    _OCTET* rgoctFullObject, UInt32* rgomodt, UInt32* pcpcszChangedAttributes, UInt16*** prgpcszChangedAttributes, Int32 fIsDNStyleNone, UInt16** ppszUpdatedCustomData, _OCTET* rgoctCSImage, Int32* rgextec, UInt16** rgpszErrorName, UInt16** rgpszErrorDetail, Int32*
    pfMoreToImport)"
    To me it seems as if FIM is unable to process the List of strings that is returned when processing the delta. Remember that this works OK when doing the full import. 
    Do you have any suggestions as to why this fails?
    Kjetil

    Hi,
    Thank you Søren! I got some good clues for the right direction from your answer. If anyone would be looking same answers the correct solution would be down below. I hope it would be help for someone else too.
    Get-Shema.ps1
    $obj
    = New-Object
    -Type PSCustomObject
    $obj
    | Add-Member
    -Type NoteProperty
    -Name "Anchor-Id|String"
    -Value 1
    $obj
    | Add-Member
    -Type NoteProperty
    -Name "objectClass|String"
    -Value "user"
    $Obj
    | Add-Member
    -Type NoteProperty
    -Name "IsLicensed|Boolean"
    -Value $true
    $Obj
    | Add-Member
    -Type NoteProperty
    -Name "FirstName|String"
    -Value ""
    $Obj
    | Add-Member
    -Type NoteProperty
    -Name "LastName|String"
    -Value ""
    $Obj
    | Add-Member
    -Type NoteProperty
    -Name "mail|String"
    -Value ""
    $Obj
    | Add-Member
    -Type NoteProperty
    -Name "immutableId|String"
    -Value ""
    $Obj
    | Add-Member
    -Type NoteProperty
    -Name "DisplayName|String"
    -Value ""
    $Obj
    | Add-Member
    -Type NoteProperty
    -Name "UsageLocation|String"
    -Value ""
    $Obj
    | Add-Member
    -Type NoteProperty
    -Name "ProxyAddresses|String[]"
    -Value ("","")
    $Obj
    | Add-Member
    -Type NoteProperty
    -Name "Licenses|String[]"
    -Value ("","")
    $obj
    Import.ps1
    #Always pass objects as hash table in pipeline
    foreach ($User
    in $Users)
    $obj = @{}
    $obj.Add("Id",
    $User.UserPrincipalName)
    $obj.Add("objectClass",
    "user")
    $obj.Add("IsLicensed",
    $User.IsLicensed)
    $obj.Add("FirstName",
    $User.FirstName)
    $obj.Add("LastName",
    $User.LastName)
    $obj.Add("mail",
    $User.UserPrincipalName)
    $obj.Add("immutableId",
    $User.immutableId)
    $obj.Add("DisplayName",
    $User.DisplayName)
    $obj.Add("UsageLocation",
    $User.UsageLocation)
    $obj.Add("ProxyAddresses", ($User.ProxyAddresses
    -ne ""))
    $obj.add("Licenses", ($User.Licenses.AccountSkuId))
    $obj
    Marti

  • BPC database connection error during the installation of sp08 BPC 7

    Hi,
    I am installing BPC 7.00.8 on window 2003.
    After installation i found an error in database connection.
    BPC logg showing
    ==============[BPC Exception Logging]==============
    [Message Type] : ERROR
    [Job Name]     : Log initialization
    [DateTime]     : 11/2/2011 10:30:25 AM
    [UserId]       :
    [Exception]
        DetailMsg  : {Unable to load DLL (librfc32.dll).}
    ==============[BPC Exception Logging End ]==============
    ==============[BPC Exception Logging]==============
    [Message Type] : TRACE
    [Job Name]     : Log initialization
    [DateTime]     : 11/2/2011 10:30:25 AM
    [UserId]       :
    [Exception]
    [Context]       :
    <Context>
    <AppSet>
    </AppSet>
    <UserID><![CDATA[JETAIRWAYS\isdhlpdsk]]></UserID>
    <App><![CDATA[]]></App>
    <Language><![CDATA[]]></Language>
    <Session>
    <SessionID><![CDATA[]]></SessionID>
    <Machine><![CDATA[]]></Machine>
    <ModuleName><![CDATA[]]></ModuleName>
    </Session>
    <CurrentView>
    <Dim>
    <Name></Name>
    <Value></Value>
    </Dim>
    </CurrentView>
    </Context>
    [Parameter]       :
    [Security]       :
        DetailMsg  : {Unable to load DLL (librfc32.dll).}
    [Stack Trace]       :
            at OSoft.Services.Common.ApplicationServiceProxy.GetUserLanguageProxy.getABAPUserLanguage()
       at OSoft.Services.Common.ApplicationServiceProxy.ContextUser.init(Hashtable htContext)
       at OSoft.Services.Common.ApplicationServiceProxy.ContextUser..ctor(String contextXML)
       at OSoft.Services.Platform.Logging.Logger.getLoggingLevelConfig(String strContext)
       at OSoft.Services.Platform.Logging.Logger.initialize(String strContext)
    ==============[BPC Exception Logging End ]==============
    ==============[BPC Exception Logging]==============
    [Message Type] : ERROR
    [Job Name]     : TestConnection
    [DateTime]     : 11/2/2011 10:30:25 AM
    [UserId]       : JETAIRWAYS\isdhlpdsk
    [Exception]
        DetailMsg  : {Exception of type OSoft.Services.Common.ApplicationServiceProxy.ApplicationServiceException was thrown.}
    ==============[BPC Exception Logging End ]==============
    Please help to resolve this error.
    Regards,
    R  Mav

    Hi R Mav,
    Did you install SAP Gui 7.1 or 7.2 on your server?
    KBA 1378741 might have the answer for your issue.
    Solution 1: Put librfc32.dll in System 32 folder on server machine and register it.
    or
    Solution 2: Install GUI on server machine.
    BR,
    Marcelo

  • Error during BI Java 7.3 installation

    Dear Guru's,
    Am doing BI JAVA 7.3 installation, during deployment phase it's giveing the below error.
    An error occurred while processing option SAP NetWeaver 7.3 > SAP Systems > Application Server Java > Standard System > Standard System( Last error reported by the step: At least one prerequisite for deployment is not met. DIAGNOSIS: Execution of Deploy Controller Runner tool '/oracle/SID/102_64/sapinst_instdir/NW73/INSTALL/NW73/ORA/STD/sapjvm/sapjvm_6/bin/java -classpath /oracle/SID/102_64/sapinst_instdir/NW73/INSTALL/NW73/ORA/STD/install/lib:/usr/sap/SID/SYS/global/security/lib/tools/iaik_jce.jar:/usr/sap/SID/SYS/global/security/lib/tools/iaik_jsse.jar:/usr/sap/SID/SYS/global/security/lib/tools/iaik_smime.jar:/usr/sap/SID/SYS/global/security/lib/tools/iaik_ssl.jar:/usr/sap/SID/SYS/global/security/lib/tools/w3c_http.jar:/usr/sap/SID/J90/j2ee/j2eeclient/sap.comtcexceptionimpl.jar:/usr/sap/SID/J90/j2ee/j2eeclient/sap.comtcjeclientlibimpl.jar:/usr/sap/SID/J90/j2ee/j2eeclient/sap.comtcloggingjavaimpl.jar:/oracle/SID/102_64/sapinst_instdir/NW73/INSTALL/NW73/ORA/STD/install/lib/tcje~cl_deploy.jar -Xmx256m -Ddc.api.verbose=false -d64 -d64 com.sap.engine.services.dc.api.cmd.Runner getParams -o /oracle/SID/102_64/sapinst_instdir/NW73/INSTALL/NW73/ORA/STD/DCRetrievedVars.props --host corqa02 --port 59004' aborts with return code 108. Error message is 'undefined. SOLUTION: Check 'undefined' and '' for more information.). You can now:
    Choose Retry to repeat the current step.
    Choose Log Files to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to /oracle/SID/102_64/sapinst_instdir/NW73/INSTALL/NW73/ORA/STD/.
    if anyone of you come across the same error, please help me out.
    I have alrady checked the /usr/sap/sid/ space, it's have enough space, but still it's giveing same error.
    Thanks
    Venkat

    Hi Venkat,
    Please have a look at latest logs under /oracle/SID/102_64/sapinst_instdir/NW73/INSTALL/NW73/ORA/STD/ for possible reasons for this failure.
    Thanks,
    Siva Kumar

  • Error during Java WS add in installation

    Hello,
    I am receiving the following error when trying to install the Java WS 6.4 add - in to an existing ab-ap installation. We are using SQL Server 2000 on Windows Server 2003 and doing an ABAP / J2EE unicode installation. It looks like a database table it is looking for is missing. I looked in the SAP tables in the database and the table is indeed missing. Does anyone know if I've overlooked an installation step that would resolve this issue for me?
    TIA -- Brandon
    SAPinst is getting started.
    Please be patient ...
    guiengine: login in process.
    Transaction begin ********************************************************
    TRACE [iaxxrfclfp.cpp:858]
    CRfcPara::checkTableParam
    Check existence of field (table/field): ACTIVITYGROUPS/AGR_NAME
    TRACE [iaxxrfclfp.cpp:837]
    CRfcPara::setTableParamValue
    Setting value (table/field/value/offset):ACTIVITYGROUPS/AGR_NAME/SAP_J2EE_GUEST/0
    TRACE [iaxxrfclfp.cpp:916]
    CRfcPara::appendTableLine
    Appended table line (table/value): ACTIVITYGROUPS/SAP_J2EE_GUEST 0000000000000000
    INFO 2004-11-03 10:22:56 [iaxxrfcimp.cpp:1058]
    CAbRfcImpl::callFunction
    Executing function call BAPI_USER_ACTGROUPS_ASSIGN.
    TRACE [iaxxrfcimp.cpp:1083]
    CAbRfcImpl::performFunctionCall
    Calling function module: BAPI_USER_ACTGROUPS_ASSIGN
    ERROR 2004-11-03 10:22:57 [iaxxrfcimp.cpp:1122]
    CAbRfcImpl::performFunctionCall
    FRF-00025 Unable to call function. Error message: Invalid call of database interface. accessed. .
    TRACE [iaxxrfcimp.cpp:1123]
    CAbRfcImpl::performFunctionCall
    RFC failure or system exception raised
    TRACE [iaxxrfcimp.cpp:1124]
    CAbRfcImpl::performFunctionCall
    Invalid call of database interface. accessed.
    Transaction end **********************************************************
    Exit status of child: 1

    I am getting the same error, any possible solution?
    thanks
    Dhandu

  • Facing error during Oracle Database Express Edition Installation

    Hi,
    I'm trying to install Oracle database XE on my system (Windows XP Service Pack 3) and keep getting an error "failed to load dll chkportdl2"" while trying to do so.
    While researching on a fix,I came across a solution that suggested uninstall of XP service pack 3 during installation and reinstall later.
    Now,I dont see an option for "Windows XP Service Pack 3" in "Add/Remove Programs".
    I believe Windows XP OBI comes up pre-loaded with Windows XP Service Pack 3 and am not sure if I can uninstall it.
    I looked up some other methods of removal here -
    http://www.troublefixers.com/uninstall-remove-windows-xp-service-pack-3-working-procedure/
    however,they werent very helpful either.
    Could you suggest how to fix this problem being faced in installing Database XE.
    Thanks and Regards,
    Priya Jetley

    Hi,
    I couldn't locate a chkportdll2 file either on my system.It's no regular dll you have on your system. It's usually unpacked in your temp directory when you execute the installer. The message you receive indicates that the installer either couldn't unpack properly (e.g. lack of free space), but this usually would have resulted in an error message. Or you have some Antivirus solution that treats that dll as malware (well, portscans can be bad) and has moved the file into a quarantine zone or at least blocked the access.
    Another option would be your user lacks execution privileges for network operations.
    The installer fails at the step when you specify a location to install the database.This could mean you don't have enough free (temp) space. How much space is left on the drive that hosts your temp folder?
    -Udo

Maybe you are looking for

  • Issue in using SQL Authentication in child SSIS packages from Parent SSIS package.

    I am trying to provide SQL Authentication mode and credentials at parent package and I am using some child pachnages been called from this package. How can I resolve this to use SQL authentication. I am using 2008 Version Thanks Sreenath Sreenath G V

  • How to create button in application toolbar in sap standard tcode va03

    Hi Gurus, I want to create a button in the application tool bar of a sap standard tcode : va03. Can some one help me with this..! Best Regards, Navin Fernandes. Edited by: NAVIN FERNANDES on Aug 12, 2010 10:02 AM Edited by: NAVIN FERNANDES on Aug 12,

  • My speakers are not working properly.

    my speakers are not working properly.the speaker dosent work with music and the keypad clicks,but speakers work fine with siri and voice memos even the speakers work fine with ringtones .how is it possible?

  • LDAP SSL and Secure

    I am unable to get SSL or Secure LDAP connection to work. These are my settings for Directory-service: name: TEST description: TEST login-prefix: TEST type: GenericLdap last-sync: (no value) last-sync-error: The server is not operational. users: (no

  • Performant way to select largest uom from MARM for all materials?

    Hi people, I need to select (for a large number of materials) the biggest UOM from MARM. (biggest as in UMREZ/UMREN > other uom). I'd like to make it into a function module, so that I can reuse it in other programs, because I'll need it a couple of t