Invalid commands in asadmin with 8.1 2005Q1
Hi-
asadmin --help shows the following commands that do not work:
create-instance
create-system-properties
delete-instance
delete-system-property
list-application-refs
list-instances
list-system-properties
start-instance
when you try and use them the following error is generated:
CLI001 Invalid Command, <some command>. Use "asadmin help" for a list of valid commands.
Can anyone else confirm this? I noticed this while working on an issue from another thread,:
http://forum.java.sun.com/thread.jspa?threadID=612142&tstart=0
Thanks-
Dave
Yes, that's right I have PE. I guess that would make sense then. I just wish asadmin would be smart enough in the --help to not list unsupported commands.
Dave
Similar Messages
-
CLI147 Invalid command Errors in asadmin
Installed Sun Java� System Application Server Platform Edition 8.1 2005Q1 on fresh installation of Solaris 10 Sparc.
When trying to run certain commands in asadmin I get the following error:
CLI147 Invalid command, create-instance
I get the same error for list-instances, delete-instance. I have not check all of the asadmin commands, but those are the major ones that I am unable to use. Any ideas on what could be causing this? I have actually uninstalled and tried installing again twice.
Thanks in advance.I think you are trying to use a feature that is available only in the Standard Edition/Enterprise Edition (SE/EE) of the application server and hence these errors.
You will not get these errors on SE/EE.
Cheers,
Vasanth -
Asadmin CLI001 Invalid Command, extract-caps-application configuration
GF bundled with CAPS 6.2. Does anybody know what can cause this error?
[o@centos bin]$ ./asadmin extract-caps-application-configuration
CLI001 Invalid Command, extract-caps-application-configuration.
[o@centos bin]$ pwd
/jcaps/6.2/appserver/bin
[o@centos bin]$ ./asadmin version
Unable to communicate with admin server, getting version locally.
Version = Sun GlassFish Enterprise Server v2.1 Patch02
Command version executed successfully.We installed CAPS 6.2 on three identically configured Linux servers. Automated install with identical options (Custom, Appserver only). On two of the servers, this command returns the expected result: CLI020 Operand is required. But on the remaining one, it's CLI001.
How can I look into this further? How is this command implemented in asadmin (which classes in which jars, etc.) ?After wiping the CAPS installation folder and reinstalling (same options, same installation media, same unattended installation via provisioning service) asadmin works as expected.
Sure hope that's not the only workaround.
I've restored a backup of the directory hierarchy to another system, with an identical JDK etc. The problem can be seen on this new server too.
Edited by: ioj on Nov 17, 2009 8:47 PM -
Hi Experts,
I am trying to install Mobiliser platform 5.1 SP03 on redhat Linux system of AWS cloud.
I have installed httpd 2.2 server on mob-web-1 server and it is running fine.
But when I include Include /opt/sybase/httpd/conf/mobiliser_httpd_ssl.conf directory in
the Apache HTTPD server configuration which is the destination configuration located in:
/etc/httpd/conf/httpd.conf (on mob-web-1) , I am getting following error:
Starting httpd: Syntax error on line 8 of /opt/sybase/httpd/conf/mobiliser_httpd_ssl.conf:
Invalid command 'SSLCertificateKeyFile', perhaps misspelled or defined by a module not included
in the server configuration
[FAILED]
So please help me to fix this error.
Thanks and Regards,
Sagar M Patil.Hi Marcus,
I have followed the steps that you have mentioned.Now httpd server is running.
But when I execute /opt/sybase/money/bin/startup.sh script in mob-aps-1 , I am getting the errors in /opt/sybase/money/logs/mobiliser.log file. Is it because of not including
Include /opt/sybase/httpd/conf/mobiliser_httpd_ssl.conf directive in /etc/httpd/conf/httpd.conf file ?
Please look into moboliser.log file contents.:
2014-06-30 04:04:15,378 [Pax Web Runtime worker] WARN org.eclipse.jetty.util.component.AbstractLifeCycle - FAILED SslContextFactory@64f06ab7(/opt/sybase/money/conf/keys/server/keystore,/opt/sybase/money/conf/keys/server/keystore): java.io.IOException: Keystore was tampered with, or password was incorrect
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
2014-06-30 04:04:15,394 [Pax Web Runtime worker] WARN org.eclipse.jetty.util.component.AbstractLifeCycle - FAILED [email protected]:8443: java.io.IOException: Keystore was tampered with, or password was incorrect
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
2014-06-30 04:04:15,402 [Pax Web Runtime worker] WARN org.eclipse.jetty.util.component.AbstractLifeCycle - FAILED SslContextFactory@64f06ab7(/opt/sybase/money/conf/keys/server/keystore,/opt/sybase/money/conf/keys/server/keystore): java.io.IOException: Keystore was tampered with, or password was incorrect
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
2014-06-30 04:04:15,409 [Pax Web Runtime worker] WARN org.eclipse.jetty.util.component.AbstractLifeCycle - FAILED [email protected]:8444: java.io.IOException: Keystore was tampered with, or password was incorrect
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
2014-06-30 04:04:15,418 [Pax Web Runtime worker] WARN org.eclipse.jetty.util.component.AbstractLifeCycle - FAILED SslContextFactory@64f06ab7(/opt/sybase/money/conf/keys/server/keystore,/opt/sybase/money/conf/keys/server/keystore): java.io.IOException: Keystore was tampered with, or password was incorrect
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
2014-06-30 04:04:15,419 [Pax Web Runtime worker] WARN org.eclipse.jetty.util.component.AbstractLifeCycle - FAILED [email protected]:8445: java.io.IOException: Keystore was tampered with, or password was incorrect
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
2014-06-30 04:04:15,433 [Pax Web Runtime worker] WARN org.eclipse.jetty.util.component.AbstractLifeCycle - FAILED SslContextFactory@64f06ab7(/opt/sybase/money/conf/keys/server/keystore,/opt/sybase/money/conf/keys/server/keystore): java.io.IOException: Keystore was tampered with, or password was incorrect
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
2014-06-30 04:04:15,434 [Pax Web Runtime worker] WARN org.eclipse.jetty.util.component.AbstractLifeCycle - FAILED [email protected]:8446: java.io.IOException: Keystore was tampered with, or password was incorrect
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
2014-06-30 04:04:15,441 [Pax Web Runtime worker] WARN org.eclipse.jetty.util.component.AbstractLifeCycle - FAILED [email protected]284: MultiException[java.io.IOException: Keystore was tampered with, or password was incorrect, java.io.IOException: Keystore was tampered with, or password was incorrect, java.io.IOException: Keystore was tampered with, or password was incorrect, java.io.IOException: Keystore was tampered with, or password was incorrect]
MultiException[java.io.IOException: Keystore was tampered with, or password was incorrect, java.io.IOException: Keystore was tampered with, or password was incorrect, java.io.IOException: Keystore was tampered with, or password was incorrect, java.io.IOException: Keystore was tampered with, or password was incorrect]
at org.eclipse.jetty.server.Server.doStart(Server.java:272)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
java.io.IOException: Keystore was tampered with, or password was incorrect
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:771)
at sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)
at java.security.KeyStore.load(KeyStore.java:1185)
at org.eclipse.jetty.util.security.CertificateUtils.getKeyStore(CertificateUtils.java:55)
at org.eclipse.jetty.util.ssl.SslContextFactory.getKeyStore(SslContextFactory.java:1053)
at org.eclipse.jetty.util.ssl.SslContextFactory.loadTrustStore(SslContextFactory.java:1027)
at org.eclipse.jetty.util.ssl.SslContextFactory.doStart(SslContextFactory.java:265)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.ssl.SslSelectChannelConnector.doStart(SslSelectChannelConnector.java:612)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.eclipse.jetty.server.Server.doStart(Server.java:290)
at org.eclipse.jetty.util.component.AbstractLifeCycle.start(AbstractLifeCycle.java:64)
at org.ops4j.pax.web.service.jetty.internal.JettyServerImpl.start(JettyServerImpl.java:113)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Stopped.start(ServerControllerImpl.java:378)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.start(ServerControllerImpl.java:70)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl$Unconfigured.configure(ServerControllerImpl.java:635)
at org.ops4j.pax.web.service.jetty.internal.ServerControllerImpl.configure(ServerControllerImpl.java:87)
at org.ops4j.pax.web.service.internal.Activator.updateController(Activator.java:245)
at org.ops4j.pax.web.service.internal.Activator$DynamicsServiceTrackerCustomizer$1.run(Activator.java:376)
at org.ops4j.pax.web.service.internal.Executor$Future.run(Executor.java:45)
at org.ops4j.pax.web.service.internal.Executor$Worker.run(Executor.java:122)
Caused by: java.security.UnrecoverableKeyException: Password verification failed
at sun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:769)
... 20 more
2014-06-30 04:04:16,815 [main] WARN org.activiti.osgi.Activator - FileInstall package is not available, disabling fileinstall support
2014-06-30 04:04:18,879 [main] WARN org.eclipse.gemini.blueprint.extender.internal.support.NamespacePlugins - Bundle AIMS Mobiliser :: Framework :: Service Configuration (com.sybase365.mobiliser.framework.service.config) cannot see class [org.springframework.beans.factory.xml.NamespaceHandlerResolver]; ignoring it as a namespace resolver
2014-06-30 04:04:21,057 [main] WARN org.eclipse.gemini.blueprint.extender.internal.support.NamespacePlugins - Bundle AIMS Mobiliser :: Framework :: Service Configuration (com.sybase365.mobiliser.framework.service.config) cannot see class [org.springframework.beans.factory.xml.NamespaceHandlerResolver]; ignoring it as a namespace resolver
2014-06-30 04:05:04,662 [aims-init-18] WARN com.sybase365.mobiliser.framework.vscan.scanner.impl.VScanImpl - Cannot initialize Virus Scan Service. The following service exception occured: Expecting an absolute path of the library: libsavisap.so
2014-06-30 04:05:39,138 [prefs-2] WARN net.sf.ehcache.hibernate.strategy.EhcacheAccessStrategyFactoryImpl - read-only cache configured for mutable entity [com.sybase365.mobiliser.money.ams.dao.model.CurrencyExchange]
2014-06-30 04:05:42,186 [prefs-2] WARN net.sf.ehcache.hibernate.strategy.EhcacheAccessStrategyFactoryImpl - read-only cache configured for mutable entity [com.sybase365.mobiliser.money.ams.dao.model.ClearingConfig]
Regards,
Sagar M Patil -
Error message: "invalid command line argument" while lodaing itunes
I'm trying to load Itunes onto a computer that already has a version of itunes on it. I get a message that says "error: -1639 invalid command line argument" Does anyone know what this means? Does this mean I can't load itunes onto a computer that already has itunes on it?
Also, I was able to load itunes on my laptop, but My ipod Icon is not appearing anywhere, not in itunes, not in explorer, not in my computer. I am, however, able to transfer music automatically when I plug the Ipod into the laptop. I have created several playlists and they have transferred over to the ipod as playlists. Any ideas why I can transfer despite not being recognized anywhere on the computer?
Last thing is, I have plugged the Ipod into three different computers with itunes on them, and the ipod does not show up in the source list.
I'm somewhat perplexed by all of this. Any help or insight would be greatly appreciated
Dell Windows XP Prohiya!
"error: -1639 invalid command line argument"
hmmm. folks typically only get that error if they are installing from removable media (such as a CD), although i have seen it happen if someone tries to install into the "recovery partition" of certain makes of PC.
if you download and save an installer to your C drive and run the install from there, do you still get the 1639?
iTunes 6.0.4.2 Installer
love, b -
ERROR: -1639 INVALID COMMAND LINE ARGUMENT
Trying to install software for Shuffle that Santa brought and get this error messsage...
"Error: -1639 invalid command line argument. Consult the windows Installer SDK for detailed command line help."
Install stops at this point.
SOMEONE HELP... My kid is chomping at the bit !
Thanks.Ok I'll do some more searching but I found something in the community forums.
APPSearch can not return this data into a property, so instead, for some unspeakable reason, returns a value of Null, follwed by another Null. This means that the property is created, and populated with two null characters. Bad news if the property also happens to be a PUBLIC property. All public properties are passed as part of the command line sent in a stream to the background installer process by the Execute Action. Since this stream now contains a double null value in a property, the stream is prematurely terminated. This creates an invalid command line, and thus the 1639 error.
This user solved it by using the MSi Cleanup installer util.
EDIT: A little more info...
This problem is almost impossible to detect through the MSI log files since our friends at Microsoft chose to limit the length of any line in the log. It is impossible to get a dump of the full command line that generates this error.
EDIT2:Note that error 1639 only ocurrs when the install package is run from removable media. When the package is run from local storage, the behavior is far more obtuse. The background install process, failing to receive a complete command line, is forced to run as if there had been no UI session, which in turn causes the APPSearch action to run again as if the install was running in silent mode. This causes re-evaluation of all properties a second time, destroying the feature selections made in the UI session, and also forcing the install to run under user credentials instead of elevated, even though AdminUser, ALLUSERS and Privleged properties are set. This is a very serious error that causes total failure of the installation. -
Essbase Add-In : "Invalid Command 11607 Received in Request Manager"
Hi All,
I am getting the following Error when I am using Member Selection Property in Essbase Add - In
"Invalid Command 11607 Received in Request Manager"
Environment :
Essbase 6.5
MS Excel 2000
Please Help...Thanks in Advance
Regards,
SonuWe have Hyperion Planning version 3.0.0 installed in the system.
Also while connecting from Excel with the server we get a warning message stating " The version of Essbase(65000) is older than the version of the Essbase API(65200) you are using".
If we proceed further, we are able to connect to the application and retrieve the dimensions and the members. But the "Member Selection" and the "Find" property doesn't work throwing the error message "Invalid Command 11607 Received in Request Manager".
Please help...
Raja -
Error(1013011) Invalid Command 10099 Received in Request Manager
This error message appears both in the server and the app log files. It 'freezes' Essbase ( we can no longer communicate with Essbase and any other cube ). The only thing to do is to 'kill' the ESSSVR process (Unix). We are running the 6.1 patch3a version but I found in the archives such a problem with the 5.02.Hyperion suggested to set the following parameters in the cfg file but it didn't work...NETDELAY 500NETRETRYCOUNT 1000__SM__BUFFERED_IO TRUE__SM__WAITED_IO TRUEPlease somebody help !
We have Hyperion Planning version 3.0.0 installed in the system.
Also while connecting from Excel with the server we get a warning message stating " The version of Essbase(65000) is older than the version of the Essbase API(65200) you are using".
If we proceed further, we are able to connect to the application and retrieve the dimensions and the members. But the "Member Selection" and the "Find" property doesn't work throwing the error message "Invalid Command 11607 Received in Request Manager".
Please help...
Raja -
Invalid command in boot strap mode
Hi All,
I am trying to install peoplesoft HRMS 9.1 with PT 8.51.
Firstly I encountered problems running grant.sql ,it showed that PSSTATUS, PSOPRDEFN, PSACCESSPRFL TABLE OR VIEW does not exist.(So i tried following "Using Data Mover, You can login in to the SYSTEM schema and EXPORT those tables (Using the 'EXPORT <RECORD>' instead of 'EXPORT *'). Then using Data Mover again, login to the SYSADM schema and IMPORT the data. NOTE: You will need two DMS scripts, one to export and one to import, as well as making sure you're using the right USER/PW combination" solution).
Secondly I can login to DATA MOVER using three combination of id's and psswds i.e system/oracle(original bootstrap mode id's) and PS/PS, SYSADM/SYSADM but the last two combinations also shows as bootstrap mode inside datamover.
Lastly i triesd to import the three tables from one schema to other by logging in to system/oracle as all three tables are present under this schema but when i run,
set log C:\REF0001_EXPORT.log;
set output C:\REF0001.dat;
export PSSTATUS;
It shows the below error in logs,
Invalid command in boot strap mode
Ended: Tue Jun 14 00:37:12 2011
Unsuccessful completion
Pls help!Thanks Nicolas,
So now what do you advise me to do...Do i need to start a fresh from scratch??..I beleive half of the tables present r under SYSADM and rest half under SYSTEM..So is there anything which i can do to import those?? -
Tcl/Tk hell -- 'invalid command name "mc"'
I've installed git to my ~. For some reason I've got a bunch of Tcl/Tk errors when I try to run programs that depend on the Tcl/Tk binaries:
% ./git-gui ~/src/git-gui
zsh: no such file or directory: ./git-gui
[127] master
% ./git-gui.sh ~/src/git-gui
Error in startup script: invalid command name "mc"
while executing
"mc "git-gui: fatal error""
invoked from within
"if {[catch {package require Tcl 8.4} err]
|| [catch {package require Tk 8.4} err]
catch {wm withdraw .}
tk_messageBox \
-icon error \
-typ..."
(file "./git-gui.sh" line 34)
[1] master
% gitk ~/src/git-gui
Error in startup script: invalid command name "mc"
while executing
"mc "Sorry, gitk cannot run with this version of Tcl/Tk.\n Gitk requires at least Tcl/Tk 8.4.""
invoked from within
"if {[catch {package require Tk 8.4} err]} {
show_error {} . [mc "Sorry, gitk cannot run with this version of Tcl/Tk.\n\
Gitk requires at le..."
(file "/home/print/bin/gitk" line 9721)
[1] master
% ~/src/git-gui
I have Tcl installed:
[1] master
% tclsh<TAB> ~/src/git-gui
tclsh tclsh8.3 tclsh8.5
It looks like Tcl is finding the tclsh8.3, even though that executable comes after the tclsh8.4 in my $PATH. I'm completely clueless of Tcl/Tk, so any hints on how to get this going much appreciated.
Thanks,
print
Last edited by print (2009-01-04 01:21:42)Hi,
tclsh is a link to tclsh8.3, probably. To find out, type in the terminal
ls -l `which tclsh`
Chances are that you won't get
lrwxrwxrwx 1 root root 8 oct 16 10:45 /usr/bin/tclsh -> tclsh8.5
as I do To fix it, just delete the link as root and create a new one pointing to tclsh8.5
Cheers -
Setup error 530 invalid command line!!!!??
hi guys,
i have the following error in my addon installation process
<i>"Setup error 530 invalid command line"</i>
all my files .ard and setup.exe was generated correctly but whene i try to install my addon
image capture
http://aycu19.webshots.com/image/13218/2000674717812036508_rs.jpgHi Manza,
What are you using to create your setup?
Have you tried the B1DE package? It contains 2 wizards to automatically create the setup of your addon together with the .ard file.
You can try to use it at least to use it as a sample of what is needed for your setup.
Are you setting something in the .ard Command Line arguments for installing/deinstalling your addon? Maybe the error is talking about it...
Regards
Trinidad. -
Cisco access point 1240g showing conf ter is invalid command
hai friends
i bought one cisco ap 1240g.
but while i am typing to conf ter in enabled mode invalid command.
and i put sh run
it showing only one fastethernet interface and there is no bvi interface on that.
and full it is showing related to the certificate commands.
plz help me in this
thanksHi Cyril,
The problem here is that the AP that you received is an LWAPP or Lightweight AP which will only work with the WLC/Unified solution. This is referenced in your first show-ver by these comments;
AIR-LAP1242AG-E-K9
LWAPP Image Version 3.0.51.0
You will need to convert the AP back to Autonomous mode.This is most possible
Here is the related info :)
Using a TFTP Server to Return to a Previous Release
Note This section does not apply to Cisco C3201WMIC and Cisco C3201LAP.
Follow these steps to revert from LWAPP mode to autonomous mode by loading a Cisco IOS release using a TFTP server:
Step 1 The static IP address of the PC on which your TFTP server software runs should be between 10.0.0.2 and 10.0.0.30.
Step 2 Make sure that the PC contains the access point image file (such as c1200-k9w7-tar.122-15.JA.tar for a 1200 series access point) in the TFTP server folder and that the TFTP server is activated.
Step 3 On the PC where the TFTP server is located, perform these steps:
a. Disable any software firewall products, such as Windows firewall, ZoneAlarm firewall, McAffee firewall, or others.
b. Ensure all Windows files are visible. From Windows Explorer, click Tools > Folder Options > View > Show hidden files and folders.
Step 4 Rename the access point image file in the TFTP server folder to c1200-k9w7-tar.default for a 1200 series access point, c1130-k9w7-tar.default for an 1130 series access point, c1240-k9w7-tar.default for a 1240 series access point, and c1250-k9w7-tar.default for a 1250 series access point.
Step 5 Connect the PC to the access point using a Category 5 (CAT5) Ethernet cable.
Step 6 Disconnect power from the access point.
Step 7 Press and hold MODE while you reconnect power to the access point.
Step 8 Hold the MODE button until the status LED turns red (approximately 20 to 30 seconds) and then release.
Step 9 Wait until the access point reboots, as indicated by all LEDs turning green followed by the Status LED blinking green.
Step 10 After the access point reboots, reconfigure it using the GUI or the CLI.
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp161272
Hope this helps!
Rob -
Smb4k error: "Invalid command: net rap share list"
Hello,
I'm having an issue using smb4k. I use it so I can easily and conveniently mount cifs shares and not have KDE multimedia copy files it wants to play otherwise to my machine first. As said in the title, upon trying to list shares on a machine, I get "Invalid command: net rap share list" as an error.
I've tried connecting to a few different machines through smb4k and am having the issue with all of them, so I believe its an issue with samba/smb4k. I've noticed that the smb4k package is over two months old now, is it possible that there are changes in Samba 3.5.x which might be causing this? I am able to mount a share using the mount command.
I had a search of the forums but couldn't find anyone mentioning this issue. If it has been covered in the past, I apologise. Any help will be great though.
Cheers,
Mitch.
Last edited by mj4077au (2010-06-10 13:03:51)I don't mean to bump this thread but if anyone has had the problem and knows of a solution, I'd really appreciate their input. I use this laptop at a lot of different locations and having a GUI to mount shares is convenient, whereas using the mount command is tedious.
Anyone who can help me that lives on the Central Coast of NSW, Australia, will gets a free carton of beer of their choice!
Last edited by mj4077au (2010-06-10 13:07:36) -
FreeRTOS_drc : invalid command name "xget_libgen_proc_handle" problem - Vivado 2015
Hi,
We are using Vivado 2015.2 for Zynq. While creating a new app and a bsp with FreeRTOS in sdk, we received the following error:
ERROR : [ Hsi 55-1545 ] Problem running tcl command ::sw_freertos_zynq_v1_02_a::FreeRTOS_drc : invalid command name "xget_libgen_proc_handle" while executing
"xget_libgen_proc_handle" (procedure "::sw_freertos_zynq_v1_02_a::FreeRTOS_drc" line 5) invoked from within
"::sw_freertos_zynq_v1_02_a::FreeRTOS_drc freertos_zynq"
[ Hsi 55-1440 ] Error(s) while running DRCs.
ERROR : Error generating bsp sources : Failed to generate BSP.
While we were using in ISE 2014.7, there wasn't any problem. However, we have to use Vivado 2015, because it is necessary for co-simulation for zynq.
Could you help? Thanks.Follow the readme file from the latest information download. The standalone bsp found in the latest info download for 2014.4 includes a newer bsp (version 4.2).
-
I want to create an applescript/automator tool to launch the "Add to library" command in iTunes with a specific path. I need to know what process is run under the hood to create such a script.
To put you in context, I have an NFS mount point with all my music and with the "add to library" command, I can add more music to the folder and update iTunes without dragging the individual folders or the whole mount point and avoid having the songs show up as doubles.
Anyone know what OS/Unix process is being called for such a command?I want to create an applescript/automator tool to launch the "Add to library" command in iTunes with a specific path. I need to know what process is run under the hood to create such a script.
To put you in context, I have an NFS mount point with all my music and with the "add to library" command, I can add more music to the folder and update iTunes without dragging the individual folders or the whole mount point and avoid having the songs show up as doubles.
Anyone know what OS/Unix process is being called for such a command?
Maybe you are looking for
-
How to create a formula to get the month name based on userresponse
Hi, I have created a report using E-Fashion - Actually i need a report like - For ex i need 4 months data from 12 months My report should display the 4 months data along with starting & end month data in the next 2 columns I have used the prompt t
-
Hi experts, while taking migo for excisable material excise tab is open my client wants it should be work according to number range of material master i.e. raw material , spare parts for diffrent number ranges now it is always show raw material so my
-
Open Box Item - Unavaible for delivery
I'm trying to purchase an open box item listed on bestbuy.com and when I proceed to checkout and enter in my shipping address I get the following message: We're sorry, but these items are not available to be shipped to that address: [Item] Store pick
-
Which table will contain user entry info
HI all, I have duplicated user in OID and I am finding the way to clean them up. Any way, I am looking for tables in ODS schema that contained users and group they belong to so I can use ldapdelete to clean them up. Please let me know which tables in
-
Receive messages ok but when hitting "write"button the above message appears. No joy with Google