Invalid Credential - when attempt to restart the SAP App. Server in sapmmc

Hi community,
I have successfully installed SAP NetWeaver 7.01 ABAP Developer edition on vista 32bit and when i open sapmmc the SAP Application Server is appear green and I able to connect it. However, after i've restarted my laptop the sap application server appear as grey status.
Therefore, I attempted to restart the sap application server in sapmmc, it prompted me a webservice authentication and I have entered the master password that I specified during the installation but it seems not working .
I get the error message "start failed: 2 - Invalid Credential" . Is there a specific SAP user name and password or any other userid and password that i require to key in in order to start the application server again? or is a configuration problem? need your advise. Many thanks in advance!

Hi Vernon,
Please enter your window userid and password when starting server node in SAP MMC.
Hope it will helps
Regards
Arun Jaiswal

Similar Messages

Internal NT error when attempting to use the Oracle Management Server

Our platform is:
HP NetServer LC 2000
1 GB Ram.
CPU: x86 Family 6 Model 8 Stepping 8
Windows NT 4.0
Oracle 8.1.6
Currently the database is working fine except the problems with
the Oracle Management Server which will allow us to do a backup.
The Management Server NT Service is giving an error
called: "Error 2140 . An Internal NT Error Occurred" There is a
Listener service running but I don't know if the settings are
correct??

Hello,
I too am an Ashford University student, and I have received the same error. However, I have found a couple workarounds that allow me to do pretty much everything except view my degree progress (for that I use Chrome on my iMac).
****CAUTION: THE FOLLOWING PROCEDURE COULD RESULT IN LOSS OF DATA****
First, back up your iPad in iTunes (if you do not know how to do this, then do not proceed until you do). Second, quit Safari (double-tap the home button so that the multi-task bar appears at the bottom of the screen, then swipe until you see Safari, then press and hold the Safari icon until the 'X' appears, finally press the 'X' to quit the App) Third, make sure Safari is configured as follows:
Settings > Safari >
Java Script "ENABLED"
Block Popups "OFF"
Accept Cookies "ALWAYS"
Reset Safari:
Settings > Safari >
Clear History
Clear Cookies
Clear Cache
Restart your iPad by holding the Home and Sleep buttons until the Apple Logo appears (immediately let go of both buttons or else you will put your iPad into recovery mode). Accessing the Ashford Student portal should now work.

ADMN-100999 error when trying to restart the Oracle HTTP server

I'm don't have access to Metalink.
Please help.

I'm don't have access to Metalink.
Please help.

SAP App Server 7 does not recognize DOM mechanism of XML security provider

Hi all,
I am trying to do XML signature by Java servlet, and am using Sun WSDP 2.0 (WebServices Developers Pack) for this purpose.
SAP Netweaver 7.0 (which implements Servlet API version 2.3) on Windows2003
JRE 1.4.2
SAP Developers Studio
SWSDP 2.0
Code snippet:
import javax.xml.crypto.dsig.XMLSignatureFactory;
XMLSignatureFactory sigFactory =
XMLSignatureFactory.getInstance("DOM", new org.jcp.xml.dsig.internal.dom.XMLDSigRI());
This gives an exception:
javax.xml.crypto.NoSuchMechanismException: Cannot find DOM mechanism type
This means that the SAP app server cannot get DOM mechanism from the provider (org.jcp.xml.dsig.internal.dom.XMLDSigRI).
I tried the same code in a stand-alone Java program, and it worked perfectly. Again, the same program when loaded on tomcat also worked. I tried with JWSDP 1.5 and the results were same (ie. worked on tomcat, worked in a stand-alone java program, but failed in SAP app server).
Does anyone know or have any idea of this issue? Why is the SAP app server rejecting the DOM mechanism of other provider? Is this a bug?
To recreate this issue, just download the xmldsig.jar for the package JWSDP2.0 (or 1.5) and write the above 2 lines in the servlet.
Thanks in advance.

This problem is solved. I am putting the reply here so that others who stumble upon this error can benefit.
Add the following line to explicitly include the provider before the getInstance
Security.addProvider(new org.jcp.xml.dsig.internal.dom.XMLDSigRI());
XMLSignatureFactory sigFactory =
XMLSignatureFactory.getInstance("DOM", new org.jcp.xml.dsig.internal.dom.XMLDSigRI());

A fatal error when attempting to access the SSL server credential private key. Error code 0x8009030d. Windows 8.1.

Hi,
We develop a server-side application which receives incoming https connections using self-signed certificate. It was all ok while we were using Windows 7 or Windows 2008 as OS, but when our clients started installing Windows 8 as server OS they encountered
big problem: application got unavailable in few hours after start.
In event logs we have following:
A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10001.
After restart, application recreates certificate and all works normal few hours till next fatal error.
This
article did not help us. And I repeat that this error appears only on Windows 8 (we tested on Windows 8.1). Windows 2012 Server we did not test yet.
How we can solve this problem?
Best regards.

Hi,
Since this article released in 2008,I suspect the code mentioned in this article doesn't supprot Windows 8.
And since the certificate was written by C#,I suggest you submit a new case on MSDN Forum as they will be more professional on your issue:
https://social.msdn.microsoft.com/Forums/en-US/home
Regards,
Kelvin hsu
TechNet Community Support

I have completed the OS X upgrade, restart etc. but when attempting to update 8 other Apps to X I get this message: WE COULD NOT COMPLETE THIS UPDATE Failed to verify the preflight file. It is not signed by Apple?

I have completed the OS X Maverick upgrade, restart etc. but when attempting to update 8 other Apps to X Maverick I get this message:
WE COULD NOT COMPLETE THIS UPDATE
Failed to verify the preflight file. It is not signed by Apple.
Help!

Similar threads solve this problem by either creating a new administrator identity, which allows one to update applications, or changing the keychain prefs to Best attempt. My issue was solved by adding a new admin user, and then updating the apps from the App store using the new identity. Under my orginal user identity the keychain app would crash when I attempted to open Prefs. After creating a new identity and updating the applications (iPhoto, etc) I found I was able to open the keychain Prefs logged into my orginal identity.

An error occurred when attempting to call the providers register function.

Hi
I am getting the following error while registering the Portlet to a WSRP portal.
]An error occurred when attempting to call the providers register function. (WWC-43134)
An error occured during the call to the WSRP Provider: Java stack trace from root exception:
java.rmi.ServerException: Internal Server Error (caught exception while handling request: oracle.webdb.wsrp.server.ContainerRuntimeException: An internal error has occurred in method <init>)
at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:384)
at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:245)
at oracle.webdb.wsrp.WSRP_v1_Registration_PortType_Stub.register(WSRP_v1_Registration_PortType_Stub.java:183)
at oracle.webdb.wsrp.client.design.v1.OraWSRP_v1_Registration_PortType.register(Unknown Source)
. (WWC-43273)
I have done all the required configuration which includes the following.
1. Installation of Infrastructure.
2. Installtion of Portal.
3. Created OC4J_WSRP instance on Portal_Home, configured DAD which is UP.
4. Deployed the application which URL while registering giving me the above year.
Can anybody give me an Instant Solution.

I am receiving the same error messages under the same conditions.
I have not not added any .jar files to the database and do have invalid 'java class' objects in my 'user_objects' table/view.
A 'Troubleshooting Pdk Services for Java' article (search OTN for WWC-43134) mentions
'recompiling the invalid objects'. How does one do this?

Is there a requirement to restart the JMS/Weblogc Server everytime when the DB goes down?

Question:
When the Database is shutdown gracefully everything was fine.
But when the Database is brought down with shutdown abort the MDB consumer will never consume messages from the topic again. And we need to restart the WebLogic Server in order to get the messages consumed again.
So is there a requirement to restart the JMS/Weblogc Server everytime when the DB goes down? If not, what type of failures will require the JMS/WLS restart?

On a DB failure, a WL JDBC store service will make a brief attempt to reconnect before shutting itself down along with any services that depend on the store.
It isn't necessary to restart the entire WebLogic Server JVM to bring the affected service(s) back if you can use the Automatic Service Migration feature. ASM can automatically restart a failed service on a different WL Server in the same cluster, and/or can try a restart-in-place for the service if the service's original host WL Server JVM is still running. The Automatic Service Migration (pdf) white-paper has a thorough discussion of this area.
In addition to ASM, there's also a "whole server migration" option that can automatically restart or migrate an entire WL server.
Tom

I am getting a "invalid screenshot" when trying to upload the screen shot to a Words With Friends cheat app. It just started doing this!

I am getting a "invalid screenshot" when trying to upload the screenshot to a Words With Friends cheat application.
What am I doing wrong?

That was no help! When playing with two grown daughters with high IQs,
I need all the help I can get!

Blue screen when attempting to use the dedicated video card

I keep getting a blue screen when attempting to use the dedicated video card.
I managed to install the AMD driver for it but without the other components like the Catalyst Control Center as it blue screened on startup when attempting to load the Catalyst Control Center.
The OS loads fine. Any applications that don't use the dedicated video card runs fine. All other drivers install fine as well.
Applications like games and Photoshop that switch to the dedicated video card on startup automatically crashes, the OS freezes then a blue screen appears.
What could be causing the problem? This problem just recently appeared. Two weeks ago.

boogs wrote:
I tried installing the drivers for my laptop from HP's support site. Still the same result.
This problem only appeared a few weeks ago. Before that, the same drivers from the HP site installed and functioned normally.
Could this be a problem with the graphics card itself?
Note sure but if we can know the system P/N others can look to see what drivers it has for the graphics to know what is there.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Error message when attempting to view the video.

When attempting to watch a video posted to Facebook or on a forum, I get an error message when attempting to view the video. "An error occurred while processing your request. Reference #50.8dd8d3d1.1354457866.1cac8e50". I'm able to view videos via YouTube. The error seems to occur when video are embedded in a post/thread.

I was hoping someone could provide some help.

When attempting to remove the Filmconvert plugin from my machine I noticed my adobe\common\plug-ins\CS5.5\MediaCore folder had Vanished !

When attempting to remove the Filmconvert plugin from my machine I noticed my adobe>common>plug-ins>CS5.5>MediaCore folder had vanished ! and there was also no folder for my cc version at all ? so digging deeper i noticed a large amount of my after effects plugins were installed separately in my applications folder ! I m very confused as to how this has happened and was wondering if anything like this had happened to any1 else ? and how to get everything back to normal ?
Im now worried theres something wrong with my bios on my Mac and i don't no why my plug-ins would have vanished from where they should be installed? as they still work fine in the actual software itself.

If you are on a Mac the Library folder is hidden. You have to jump through some hoops to get there.

After upgrade SP-Crawl Error: The SharePoint item being crawled returned an error when attempting to download the item.

Hi All - After the upgrade, I am getting SP-Crawl Error for certain links. I check the Crawl component has proper permission.
Google is showing some article like
http://blog.karstein-consulting.com/2012/04/20/error-in-crawl-log-the-sharepoint-item-being-crawled-returned-an-error-when-attempting-to-download-the-item/
not sure if this resolution is referring to 2010 and/or 2013.
I checked the registery editor. I couldn't find 14.0 under the Office Server.
Any clue?
Regards,
Khushi
Khushi

I checked the web application policy the search crawl account has full read permission.
Crawl
Fiddler
Log Error referring the Correlation ID
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Monitoring                    nasq Medium Entering monitored scope (Request (GET:/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Parent No
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Logging Correlation Data      xmnv Medium Name=Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD) e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.14 w3wp.exe (0x1698)                       0x0118 SharePoint Foundation
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af71 Medium HTTP Request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af75 Medium Overridden HTTP request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
General                       af74 Medium HTTP request URL: /sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1738 SharePoint Foundation
Files                         aise3 Medium Failure when fetching document. 0x80070090 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=20.5461867360237 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=29.917489513332 e8b1679c-0476-70d4-9fcd-2549ba3ee9d4
01/06/2014 13:05:06.17 w3wp.exe (0x1698)                       0x1960 SharePoint Foundation
Monitoring                    nasq Medium Entering monitored scope (Request (GET:<SiteURL>nsurance%20Benefits%2fLife%20Insurance%2fBasic%20Life%20and%20ADD&FolderCTID=0x01200039DA632EEACF264685CF39D68A18F7C8)).
Parent No
Any clue?
Regards,
Khushi
Khushi

Problems converting PDF to MS Word document. I successfuly converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the co

Problems converting PDF to MS Word document. I successfully converted 4 files and now subsequent files generate a "conversion failure" error when attempting to convert the file. I have a large manuscript and I separated each chapter to assist with the conversion; like I said, first 4 parts no problem, then conversion failure. I attempted to convert the entire document and same result. I specifically purchased the export to Word feature. Please assist. I initially had to export the Word Perfect document into PDF and attempting to go from PDF to MS Word.

Hi sdr2014,
I'm sorry to hear your conversion process has stalled. It sounds as though the problem isn't specific to one file, as you've been unable to convert anything since the first four chapters converted successfully.
So, let's try this:
If you're converting via the ExportPDF website, please log out, clear the browser cache, and then log back in. If you're using Reader, please choose Help > Check for Updates to make sure that you have the most current version installed.
Please let us know how it goes.
Best,
Sara

I get a runtime error when attempting to search the store in Itunes. I unistalled and reloaded. How can I fix this?

I just began getting a runtime error when attempting to search the iTunes store.
I uninstalled and reinstalled but, it's still happening.
How can I fix this so I can start to buy music again?

I have the same error, but I think we will get no solution for this problem.
You've get no answer here and the Apple support also doesn't send an answer how to solve the problem.
BTW I have also Windows 7 and the newest version of iTunes 64-bit.
Greetings Mike

Invalid Credential - when attempt to restart the SAP App. Server in sapmmc

Similar Messages

Maybe you are looking for