Invalid Duration error in MS Project 2010

Hi,
I have a user who has brought an issue to me. He is a regular user of MS Project. When he opens up his .mpp file he instantly gets an error of "Invalid Duration. This is not a valid duration or it is outside the range for this field".
He has tried out every validation resolution option there is, he has looked at unpublished work items, he has also checked it through Excel. He has re-entered the data, checking the format of every single piece of data. Nothing was wrong and none
of these checks have made any difference. If he clicks on the Ok button on the error message, the file does then appear to operate normally with no issues, but he can't be 100% sure this is the case due to this message re-occurring every time he
opens it again. Is there anyone that has any ideas why this might be happening. Please could someone throw some light on this ...?
Thank you, Lisa

Check if using Macro on the plan. Similar issue has been fixed in June 2013 for project 2010, not sure which version you have seen the reported problem.
Project 2010 hotfix package (Project-x-none.msp): June 11, 2013
'http://support.microsoft.com/kb/2817385'
You run a macro that sets the duration of a custom duration field for a task in a project in Project 2010. When you save and then reopen the project, you receive the following error message:
Invalid Duration
This is not a valid duration, or is outside the range for this field.
Type a duration in the correct format: for example, 4 hours (or 4h), 12 days (or 12d), or 2ed for elapsed days.
If its 2010, test with the above cu as its latest one.
If this isn't case, please try using XML and check if that helps.
If above doesn't help, provide information on project version and past history of plan, like was it created in past version and now opened in other version, etc.

Similar Messages

Set a custom duration field using VBA throws the message "Invalid duration" when reopening the Project

With a custom code we set Duration9 in Project 2013.
After executing the code everything seems to be ok.
After saving and reopening the Project it shows a message "Invalid Duration", and the value is shown as estimated (Questionmark).
In VBA create following code:
Sub SetDuration()
    Dim newVal As Long
    newVal = 14400
    Tasks(1).Duration9 = newVal
End Sub
Execute Code.
Close VBA.
Open the Project and you will get the same message box
The only way as far as I found out is to manually retype the Duration in that field. What is not exactly what I want.
Is this a bug in MSP or a hidden Feature? Does anyone has an idea?
Best Regards Steffen

I was able to replicate what you saw. I can't explain it per se, but this code seems to get around the issue:
Sub TESTDUR()
    Dim NewVal As String
    NewVal = "30d"
    ActiveProject.Tasks(1).Duration9 = NewVal
End Sub
Andrew Lavinsky [MVP] Blog: http://azlav.umtblog.com Twitter: @alavinsky

MS Project 2010 - An unknown error has occurred while syncing to a SharePoint site.

Dear all,
I encountered a generic error when using MS Project 2010 to sync with our SharePoint 2013 on-premise. I want to clarify is it default behaviour or a bug.
When I start MS Project 2010 professional from new -> sync to Sharepoint by type in URL and the list name. I can create a new project list successfully. I have verified the tasks are sync to the Sharepoint and I am able to see them listed on site.
After sync, I save the Ms Project document to local computer. Named test1.mpp. Then I close MS Project. Then open test1.mpp again and then sync immediately. This time an error show up:
An unknown error has occurred while syncing to a SharePoint site. Ensure the SharePoint site is running and try again
Since I didn't add anything to the mpp file, I believe it doesn't contain any invalid data blocking the sync. What would be the problem? Thanks.
Mark

No, I didn't. I just fill the site path like:
http://sharepoint.com/sites/Project/
and then the List field:
ProjectA
I want to clarify the sequence should be:
After sync, I save the Ms Project document to local computer. Named test1.mpp. Then I close MS Project. Then open test1.mpp again and then sync immediately. Then error occur.

Error opening Project 2007 file after using project 2010

This is the second time I'm experiencing this problem.
Created a file (say Rev 1) in Project 2007 at work and took it home and updated it using Project 2010. When I finished updating using Project 2010, I saved the file in Project 2007 format. Came to work the next day, opened the file using
Project 2007 and did a "Save As" so that I have another revision of the file (Rev 2).
After updating Rev 2 in Project 2007 I closed it but when I came to work the next day I couldn't open Rev 2 file again either in Project 2007 or 2010. This has happened to me with 2 different files.
The error message I get is
An unexpected error occured during command execution.
Try the following:
Verify that all argumen names and values are correct and are of the correct type.
You may have run out of memory. To free up available memory, close programs, projects, or windows that you aren't using.

It seems to me that it has to do something with invalid characters in the file name of the timeline. Or it could be anything from an '&' to two concurrent spaces, mulitple '.' or even a dash (-). Stick with single spaces, letter and
number combinations and you should be fine. The problems arise based on how the file has been opened. Here’s one thread like yours. It could be useful for your, read http://www.filerepairforum.com/forum/microsoft/microsoft-aa/project/625-project-error-“an-import-error-occurred”

Microsoft Project 2010 Error/Bug Using Filters and AutoFilters

Dear Community Members/Team,
I came across an error/bug while using Filter and AutoFilter options in Microsoft Project 2010. The details are as under:
I have an MS Project 2010 file which has total 3049 activities (IDs).
The linking process (predecessors and successors) is almost complete.
In MS Project 2010 software console, in the bottom left most corner, I have right clicked and enabled the options of "Filter" and "AutoFilter".
In the "View" tab located at top console, I have selected "[No Filter] against the "Filter" icon. Also, from the drop down arrow against the "Filter"
icon, I have enabled "Display AutoFilter". As a result I can see drop down arrows in front of all columns displayed in the file.
I have displayed columns "Duration", "Start", "Finish", "Total Slack", etc.
I used the drop down arrow appearing in front of "Total Slack" column, and I can see some options. At the bottom I can see all the "Total Slack" values with
scroll option available and all the boxes here are checked. I remove the check box in "Select All" field and manually select any random value such as "-11.17 wks".
To my surprise, some values when selected, they are displayed correctly with the relevant activities shown. However some of the values which I select are not appearing and the relevant
activities are not shown and only empty rows are shown. So I use "Clear Filter" and try some other option.
Now, to find those activities, I have to click on the drop down arrow in front of "Total Slack" column, Go to "Filters", and select the last option "Custom".
Now I select show rows where Total Slack "equals" and I select any value from drop down arrow appearing in front of "equals", I can see all those values of "Total Slack" and I randomly select the same value for e.g. "-11.17
wks". This time the relevant activity is displayed correctly which was not shown by using the above method of selecting a certain value by selecting a check box from drop down arrow appearing against any column.
I hope to have a response from the community.
Regards,
Usman

Hi Usman,
Strangely we are having the exact same discussion with another member here:
https://social.technet.microsoft.com/Forums/projectserver/en-US/0ae3530f-6760-4ef9-afd9-6028258a490e/autofilter-feature-malfunctioning?forum=projectprofessional2010general
Please go through this thread and tell us if it brings some light. Particularly try with a brand new file to reproduce the error. It could see the error on Ahmad's file, but couldn't reproduce it on a brand new file.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Error saving Project 2010 files to network drive - doesn't see network drive

ANSWERED (11 April 2014):
So it seems the resolution to this is to simply create a new share with a different name. I used the existing folder (to retain NTFS permissions) and just select to Add a new Share (applying the same Share permissions as the non working Shares).
Deploying this new Share via Group Policy as a test resulted in staff being able to open files from Windows Search, save files through MS Project and the Share being accessible through browsing SMB.
All problems resolved by using a new share name for the existing folder. Seems to be a corruption in the namespace.
Note: I had previously deleted the share and recreated it. I had removed all NTFS permissions and readded (through both the GUI and icacls). This didn't make a difference.
Only changing the name of the share fixed the problem.
Original Question
Already
posted here... but Microsoft Support has not responded.
It seems some staff on some computers are having problems saving MS Project files to the network. This is only since an upgrade to SBS2011 (from SBS2003). The only difference now, is that network drives are mapped via group policy rather than a 'net
use' script.
This is affecting users on Windows 7 and Windows Server 2008 R2, with either MS Project 2007 or 2010. The users have full change access to the folders and can create new files and modifying existing files, just not a MS Project file. Other file tyes, e.g
Word .docx, Excel .xlsx, Adobe .pdf files, all work fine. These files can be opened, edited and saved normally without problem.
To replicate this:
The user opens an existing file or creates a new file on the network folder (either through Windows Explorer or MS Project). They then click File > Save in MS Project and receive the following error (see pic below):
An interesting symptom of this is that if you select File > Save As in MS Project, the Sae As dialog box doesn't remeber the path location of the network drive. MS Project instead prompts to save the file in the local users documents folder (see pic below):
If they browse back to the original folder where the file was saved and choose to save it there, they are of course, prompted to overwrite the existing file and they can save the file. But the same thing happens every time they open the file.
It seems the problem is that Project isn't seeing the path of the file or that the network drive is attached.
If a user closes the file without saving it, they are prompted to save the file and the prompt shows the drive path:
Do you want to save changes to "N:\... Projects\Active Projects\CC...\F4 Project Plan File\004 Programme\test project file.mpp"?
But choosing to save the file gives them the same result as Save As, they are prompted for a new location as if the original file location doesn't exist.
I have disconnected the mapped drive and connected it again using net use but get the same error.
I have reinstalled MS Project 201, installed Project 2010 SP2 and installed Windows updates and it does the same thing, exactly the same symptoms.
Further, if the user opens a file from the network drive, the file shows in the Project recent files list. If they try to open the file from the recent files list in project they get the following error:
"Project cannot open the file.
-Check that the file name and path are correct.
-Check that the file format is recognized by Project.
Project files saved in a version earlier than Microsoft Project 98 can't be opened...."
This is a test file that I created on the user's computer and network drive, This is being opened with the same version it was created in. If I browse to the folder in Windows Explorer I can open the file. Of course, I then can't save the file (I still get
the original error). I'm logged on with Domain Admin privileges.
I've checked these links from other threads (neither apply to my scenario):
http://support.microsoft.com/kb/983458/en-us|
http://social.technet.microsoft.com/Forums/en-US/excel/thread/2eeea140-7e6c-4cb9-a89b-06d2102bd9f7/
I've downloaded my TechNet version of he software and installed it with Sp2 and Windows updates and it does the same thing. This also happens on the Remote Desktop server (Server 2008 R2) using MS Project 2007.

Case 1
This error message appears when the document is open on two or more computers that are running different operating platforms. For example,
if the document is open on a Macintosh computer and you open it on a second computer running Windows or Windows NT, the error occurs when either user tries to save the document.
This problem stems from a difference between the ways Macintosh OLE and Windows OLE open files. As a result, you cannot save a file on two different operating platforms at the same time.
Case 2
This error occurs in Word 97 for Windows if you save to a MAPROOT type network drive connection on a NetWare server where spaces exist in
the file or folder name.
Case 3
This problem may occur if an anti-virus program running on a network has the ability to scan for macro viruses in documents in shared network
folders.
For example, if you have the following:
a shared folder on a network server
-and-
an anti-virus program is running on the network server that is set to monitor the shared folder,
when you attempt to save a document (across the network) to the shared folder, the anti-virus checker may cause the error to occur.
Case 4
This problem may occur on Novell networks when the AutoRecover files path is either blank or set to a network drive.
According each, please try the following workaround:
WORKAROUND
To work around this problem, use one of the following methods appropriate to your situation.
Case 1
Method 1:
Move the document to your local hard disk for editing. Move it back to the server after you finish.
Method 2:
Save a copy of the
file with a different
file name, and work on the copy, either on your hard disk or on the server.
Case 3
Method 1:
Move the document to your local hard disk for editing. Move it back to the server after you finish.
Method 2:
Do not use spaces in the directory or document names.
Method 3:
Do not use MAPROOT-drive connections. Map your drive connections to the volume-level only.
Case 4
Turn off the anti-virus protection on the network server and then try to
save the document. Contact your anti-virus protection software company for additional details and/or updates to their programs.
Case 5
Set the AutoRecover files path to your local drive. To change the AutoRecover path, use the following steps:
1.
On the Tools menu, click Options.
2.
On the File Locations tab, select AutoRecover files and then click Modify.
3.
Change the Modify Location dialog box to a
folder on your local drive and then click OK.
4.
Click OK to close the Options dialog box.
Hope that helps.
Smith

SCCM 2012 - Project 2010 Standard deployment failed with error 1603

Hi everyone,
I’m in the progress to roll out a software deployment via SCCM 2012, it’s to remove the current Project 2010 Professional we installed and reinstall the Standard version. We got a task sequence for the job, which is Reboot>Un-install Project 2010 Pro>Reboot>Install
Project 2010 Std.
The Un-installation process uses this command: setup.exe /uninstall PrjPro /config "PrjPro.WW\uninstall.xml"
The Installation process uses this command: setup.exe /adminfile project_silent_install.MSP
But the deployment result is quite random, some of the PCs would succeed without any issue, some of them with fail at the installation process with 1708/1603 error. As far as I know we use standard Win 7 64bits SOE across the environment, so everyone should
have same system baseline.
I reviewed some of the failed Project 2010 Standard installation logs as it shows the following:
Executing chained package: PrjStdWW
05/09/2014 20:16:14 Installing chained package: PrjStdWW
PERF: TickCount=530512 Name=Verify MSI local install source Description=Begin function
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
LIS: wait for package "{90140000-003A-0000-0000-0000000FF1CE}" to complete caching
LIS: package "{90140000-003A-0000-0000-0000000FF1CE}" caching completed
PERF: TickCount=530528 Name=Completed verify local install source Description=End function
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Use Shell UI transform : LIS\{90140000-0115-0409-0000-0000000FF1CE}\ShellUI.MST
Current transform is at path: LIS\{90140000-0115-0409-0000-0000000FF1CE}\ShellUI.MST
OSE is detected as a registered service. Service binary is reported at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
OSE service binary is detected at location: C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE
File at \\SCCM2012\SMSPKGE$\PC100139\PrjStd.WW\ose.exe has version: 14.0.4730.1010
File at C:\Program Files (x86)\Common Files\Microsoft Shared\Source Engine\OSE.EXE has version: 14.0.4730.1010
Running OSE version 14.0.4730.1010
Using transform at path: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\ShellUI.MST
Catalyst Package Install...
Package: PrjStdWW
File: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi
Command Line: PATCH="\\SCCM2012\SMSPKGE$\PC100139\project_silent_install.MSP" ADDLOCAL=C.35347883.0E64.45B4.88A0.1881DE05E259,OSpp_Core,Project_PIA,SetupExeArpEntry,Office10Fix1,ProductFiles,InternationalSupportFiles_JPN,AceFiles,IMNFiles,OfficeIntlRDC,AceOdbc,OArt_DocTheme,OSetupController,WISPFiles,TCDRegistration,SetLanguageFiles,TCWorks7Files,ClviewFiles,VBAFiles,OfficeAppSupport,TextConverters,ProductNonBootFiles,dummy_Office_PIA,CAGOffice10,VSCommonPIAHidden,WebDiscussFiles,CAGCat10,CAGCat10Clips,MsoInstalledPackagesScoped,WxpFiles,SetupControllerFiles,Forms_PIA,dummy_MSCOMCTL_PIA,AlwaysInstalled,Gimme_OnDemandData,AceRepl,OISFiles,OfficeOLESupport,OfficeMSProof6,CAGFiles,InternationalSupportFiles_ArialUni,OSpp,Ace_PIA,GraphicsFiltersFile,WebDriveFiles,PROJECTFiles,ProductFiles_B2TR,SetupXmlFiles,OfficePostBoot,DocumentImagingUtils,VSTOCLR35,CAGCategoryFiles,ProjectCommon,VSTO,ProofingParent,MsoCommonShellHandler,OfficeDigitalSFiles,CARegistryFeature,OfficeCoreRDC,SetupExeAddRegistry,NonC2R_ProductFiles,MSSOAP3,TranslationCore,CAGOffice10Clips REMOVE=WISPHidden ARPENTRY_NOMODIFY="#0" ARPENTRY_MODIFYPATH="""C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe"" /modify PRJSTD /dll OSETUP.DLL" INSTALLLOCATION="C:\Program Files (x86)\Microsoft Office\" SLD_OEMPIDKEY="0" ARPENTRY_NOELEVATEONMODIFY="#0" SETUP_REBOOT="never" COMPANYNAME=" " ARPENTRY_SKUCOMPONENTS="[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Office.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Proofing.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Project.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Office64.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\PRJSTD\setup.xml[~]" ARPENTRY_HELPLINK="" ARPENTRY_DISPLAYICON="C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\OSETUP.DLL,1" ARPENTRY_DISPLAYNAME="Microsoft Project Standard 2010" ACCEPTEDEULA="1" ARPENTRY_DISPLAYVERSION="14.0.4763.1000" BRANDING_XML="C:\Windows\TEMP\Setup00001048\BRANDING.XML" SLD_SUPPORTSBYPASS="0" SLD_ACID="5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE" SLD_TRIALTYPE="0" ARPENTRY_PACKAGEREFS="[~]OfficeMUISet.en-us[~]OfficeMUI.en-us[~]Proofing.en-us[~]Proof.en-us[~]Proof.es-es[~]Office64MUISet.en-us[~]PrjStdWW[~]Office64WW[~]Office64MUI.en-us[~]ProjectMUI.en-us[~]Proof.fr-fr[~]" SLD_DPID="#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en-US" ARPENTRY_SHELLUITRANSFORMLANGUAGE="en-US" USERNAME=" " ARPENTRY_CONTACT="" ARPENTRY_HELPTELEPHONE="" ARPENTRY_PRODUCTCODES="[~]{90140000-00B4-0409-0000-0000000FF1CE}[~]{90140000-002C-0409-0000-0000000FF1CE}[~]{90140000-003A-0000-0000-0000000FF1CE}[~]{90140000-002A-0000-1000-0000000FF1CE}[~]{90140000-001F-0C0A-0000-0000000FF1CE}[~]{90140000-001F-0409-0000-0000000FF1CE}[~]{90140000-001F-040C-0000-0000000FF1CE}[~]{90140000-0115-0409-0000-0000000FF1CE}[~]{90140000-006E-0409-0000-0000000FF1CE}[~]{90140000-002A-0409-1000-0000000FF1CE}[~]{90140000-0116-0409-1000-0000000FF1CE}[~]" ARPENTRY_INSTALLLOCATION="C:\Program Files (x86)\Microsoft Office\" SETUPEXE_DOARPWRITE="1" ACIDS="11B39439-6B93-4642-9570-F2EB81BE2238;5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE;B6E9FAE1-1A0E-4C61-99D0-4AF068915378" ARPENTRY_SPPSKUID="[~]5DC7BF61-5EC9-4996-9CCB-DF806A2D0EFE[~]" ARPENTRY_NOREMOVE="#0" SLD_PKU="0" SLD_PID="82503-001-0000106-49615" LICTYPE="ltKMS" ARPENTRY_UNINSTALLSTRING="""C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe"" /uninstall PRJSTD /dll OSETUP.DLL" ARPENTRY_NOREPAIR="#1" ARPENTRY_URLUPDATEINFO="" ARPENTRY_URLINFOABOUT="" REMOVEPREVIOUS="" ARPENTRY_CACHELOCATION="C:\MSOCache\All Users" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\" ARPSYSTEMCOMPONENT=1 TRANSFORMS="C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\ShellUI.MST" ALLUSERS="1"
PERF: TickCount=530543 Name=MsiPackage::Install Description=Calling OMsiInstaller::InstallProduct for package file "C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Error: Failed to install product: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi ErrorCode: 1603(0x643).
Log level changed from: Standard to: Verbose
Rolling back chain
05/09/2014 20:18:47 Rolling back package: PrjStdWW
There appears to be no rollback work to do for package: PrjStdWW path: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\PrjStdWW.msi
05/09/2014 20:18:47 Rolling back package: Office64WW
Package Office64WW was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64WW
File: C:\MSOCache\All Users\{90140000-003A-0000-0000-0000000FF1CE}-C\Office64WW.msi
Command Line: ADDLOCAL=AcePiaReg64,VSTO64,WordXmlEditVerb64,ExcelXmlEditVerb64,GrooveShellIntegration64,Project64Files,OSpp64_Core,ExcelPiaReg64,GraphPiaReg64,FormsPiaReg64,SmartTagPiaReg64,PPTXmlEditVerb64,MsoInstalledPackagesScoped,OfficeExample64bitFilesA,WAC_XmlEditVerb64SPD,SetupXmlFiles,WordPiaReg64,Outlook64Files,AlwaysInstalled64,VBEPiaReg64,VisioPiaReg64,Outlook64SearchShellReg,OneNote64Files,SetupControllerFiles,ProjectPiaReg64,SearchFilters64Files,OutlookPiaReg64,Gimme_OnDemandData,Visio64ShapeSearch,WAC_PIARegSPD64,ProductNonBootFiles64,XDocsPiaReg64,PublisherPiaReg64,OneNotePIAReg64,ProductFiles64,OfficeExample64bitFilesB,OfficePiaReg64,Visio64Files,TCDRegistration64,OSpp64,XDOCSFiles64,XDocsXmlEditVerb64,MsoCommonShellHandler64bit,AccessPiaReg64,PowerPointPiaReg64 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64WW ProductCode:{90140000-002A-0000-1000-0000000FF1CE}
05/09/2014 20:18:56 Rolling back package: ProjectMUI.en-us
Package ProjectMUI.en-us was installed in the chain... uninstalling as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Install Rollback (uninstall)...
Package: ProjectMUI.en-us
Product Code: {90140000-00B4-0409-0000-0000000FF1CE}
Command Line: REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back install of package: ProjectMUI.en-us path:C:\MSOCache\All Users\{90140000-00B4-0409-0000-0000000FF1CE}-C\ProjectMUI.msi
05/09/2014 20:19:00 Rolling back package: Proofing.en-us
Package Proofing.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proofing.en-us
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proofing.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proofing.en-us ProductCode:{90140000-002C-0409-0000-0000000FF1CE}
05/09/2014 20:19:04 Rolling back package: Proof.en-us
Package Proof.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.en-us
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.en\Proof.msi
Command Line: ADDLOCAL=FindAllWordFormsFiles_1033,Gimme_OnDemandData,SpellingAndGrammarFiles_1033,ThesaurusFiles_1033,MsoInstalledPackagesScopedIntl_1033,HyphenationFiles_1033,OCR_1033,SetupControllerFiles,SetupXmlFiles REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.en-us ProductCode:{90140000-001F-0409-0000-0000000FF1CE}
05/09/2014 20:19:05 Rolling back package: Proof.fr-fr
Package Proof.fr-fr was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.fr-fr
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.fr\Proof.msi
Command Line: ADDLOCAL=MsoInstalledPackagesScopedIntl_1036,Gimme_OnDemandData,SpellingAndGrammarFiles_1036,SetupControllerFiles,FindAllWordFormsFiles_1036,TranslationFiles_1036,ThesaurusFiles_1036,HyphenationFiles_1036,SetupXmlFiles,OCR_1036 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.fr-fr ProductCode:{90140000-001F-040C-0000-0000000FF1CE}
05/09/2014 20:19:11 Rolling back package: Proof.es-es
Package Proof.es-es was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Proof.es-es
File: C:\MSOCache\All Users\{90140000-002C-0409-0000-0000000FF1CE}-C\Proof.es\Proof.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SpellingAndGrammarFiles_3082,OCR_3082,FindAllWordFormsFiles_3082,HyphenationFiles_3082,ThesaurusFiles_3082,MsoInstalledPackagesScopedIntl_3082,SetupControllerFiles,SetupXmlFiles,TranslationFiles_3082 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Proof.es-es ProductCode:{90140000-001F-0C0A-0000-0000000FF1CE}
05/09/2014 20:19:12 Rolling back package: Office64MUISet.en-us
Package Office64MUISet.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64MUISet.en-us
File: C:\MSOCache\All Users\{90140000-0116-0409-1000-0000000FF1CE}-C\Office64MUISet.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64MUISet.en-us ProductCode:{90140000-0116-0409-1000-0000000FF1CE}
05/09/2014 20:19:19 Rolling back package: Office64MUI.en-us
Package Office64MUI.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: Office64MUI.en-us
File: C:\MSOCache\All Users\{90140000-0116-0409-1000-0000000FF1CE}-C\Office64MUI.msi
Command Line: ADDLOCAL=OfficeExample64bitFilesBIntl_1033,OfficeExample64bitFilesAIntl_1033,Gimme_OnDemandData,Outlook64SearchShellRegIntl_1033,ProductFilesIntl64_1033,MsoInstalledPackagesScopedIntl_1033,OneNoteToLinkedNotesIEAddin64Intl_1033,GrooveFiles64Intl_1033,SetupControllerFiles,SetupXmlFiles REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: Office64MUI.en-us ProductCode:{90140000-002A-0409-1000-0000000FF1CE}
05/09/2014 20:19:20 Rolling back package: OfficeMUISet.en-us
Package OfficeMUISet.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: OfficeMUISet.en-us
File: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\OfficeMUISet.msi
Command Line: ADDLOCAL=Gimme_OnDemandData,SetupXmlFiles,SetupControllerFiles,MsoInstalledPackagesScopedIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: OfficeMUISet.en-us ProductCode:{90140000-0115-0409-0000-0000000FF1CE}
05/09/2014 20:19:20 Rolling back package: OfficeMUI.en-us
Package OfficeMUI.en-us was uninstalled in the chain... installing with previous feature states as part of chain rollback...
Resource File Manager : Converted CultureTag [en-US] to LocaleId [1033].
Catalyst Package Uninstall Rollback (install)...
Package: OfficeMUI.en-us
File: C:\MSOCache\All Users\{90140000-0115-0409-0000-0000000FF1CE}-C\OfficeMUI.msi
Command Line: ADDLOCAL=MetricConverterIntl_1033,AlwaysInstalledIntl_1033,MSTagPluginStockFilesIntl_1033,WebDiscussFilesIntl_1033,GraphicsFiltersPNGFilesIntl_1033,EquationEditorFilesIntl_1033,GraphicsFiltersEPSFilesIntl_1033,MSTagPluginNamesFilesIntl_1033,TCWP5FilesIntl_1033,CAGOffice10Intl_1033,OISFilesIntl_1033,WxpFilesIntl_1033,XDOCSEditorFilesIntl_1033,CAGFilesIntl_1033,WISPHiddenIntl_1033,CAGCat10Intl_1033,SetLanguageFilesIntl_1033,OSetupControllerIntl_1033,MsoInstalledPackagesScopedIntl_1033,TCRecoverFilesIntl_1033,SetupControllerFiles,ClviewFilesIntl_1033,GraphHelpFilesIntl_1033,ProductNonBootFilesIntl_1033,MSTagPluginPlacesFiles_1033,VisioPreviewerIntl_1033,ProductFilesIntl_1033,AceReplIntl_1033,GraphicsFiltersCGMFilesIntl_1033,GraphicsFiltersWPGFilesIntl_1033,Gimme_OnDemandData,TCWP6FilesIntl_1033,GraphicsFiltersGIFFilesIntl_1033,GRAPHFilesIntl_1033,MSTagPluginDateFilesIntl_1033,WebDriveFilesIntl_1033,LOBiFilesIntl_1033,LISTFilesIntl_1033,UICaptionsCompanionIntl_1033,SetupXmlFiles,AceFilesIntl_1033,TOOLSFilesIntl_1033,MSSOAP3Intl_1033,VBAHelpFilesIntl_1033,GraphicsFiltersPICTFilesIntl_1033,OfficeDigitalSFilesIntl_1033,VBAFilesIntl_1033,GraphicsFiltersJPEGFilesIntl_1033,QueryFilesIntl_1033,SetLanguageHelpFilesIntl_1033 REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Windows\TEMP\Setup00001048\"
MSI(INITIALIZE): '<NULL>'
MSI(TERMINATE): '<NULL>'
Successfully rolled back the configuration of package: OfficeMUI.en-us ProductCode:{90140000-006E-0409-0000-0000000FF1CE}
Error attaching to OSE, error 0x00000000
Stopping running ose
LIS: start uncaching for download "{90140000-002C-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-002C-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-003A-0000-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-003A-0000-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-00B4-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-00B4-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-0115-0409-0000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-0115-0409-0000-0000000FF1CE}-C"
LIS: start uncaching for download "{90140000-0116-0409-1000-0000000FF1CE}-C"
LIS: finished uncaching for download "{90140000-0116-0409-1000-0000000FF1CE}-C"
Error attaching to OSE, error 0x00000000
Stopping running ose
SystemRestore : Attempting to cancelling System-Restore-Point for Product [Microsoft Project Standard 2010] (with RestorePointType [0, Installed]).
SystemRestore : Successfully cancelled System-Restore-Point for Product [Microsoft Project Standard 2010] (with RestorePointType [0, Installed]).
Not showing completion dialog because it was not requested.
Catalyst execution finished: 05/09/2014 20:19:25. Return code: 1603.
PERF: TickCount=722128 Name=RunSetup Description=End function
Can onyone enlighten me what's went wrong, and why did I get this inconsitent installation behaviour?
Thank you very much!!!

1603 means there is a fatal error during installation process.
Take a look at the article below. It may help on finding cause.
Hi Juke,
I did do fair a bit of Googling before I started the post. I have increased the logging level on one of the machines failed on the installation. Apparently Project installation log doesn't throw the "return value 3", I think it's pointing to a particular
updating item, anyone knows what is it?
Microsoft Office Project Standard 2010 - Update '{35347883-0E64-45B4-88A0-1881DE05E259}' could not be installed.
The following is the detailed installation log.
MSI (s) (8C:B4) [20:31:33:122]: Executing op: SetTargetFolder()
MSI (s) (8C:B4) [20:31:33:122]: Executing op: FontRegister(Title=Arial Unicode MS (TrueType),File=ARIALUNI.TTF)
MSI (s) (8C:B4) [20:31:33:122]: SHELL32::SHGetFolderPath returned: C:\WINDOWS\Fonts
MSI (s) (8C:B4) [20:31:33:122]: Executing op: End(Checksum=0,ProgressTotalHDWord=0,ProgressTotalLDWord=0)
MSI (s) (8C:B4) [20:31:33:122]: Error in rollback skipped. Return: 5
MSI (s) (8C:B4) [20:31:33:746]: Entering MsiProvideAssembly. AssemblyName: Policy.12.0.Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:746]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:777]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:777]: Entering MsiProvideAssembly. AssemblyName: Policy.11.0.Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:777]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:808]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:808]: Entering MsiProvideAssembly. AssemblyName: Microsoft.Office.Interop.MSProject,version="14.0.0.0000000",processorArchitecture="MSIL",publicKeyToken="71E9BCE111E9429C",fileVersion="14.0.4751.1000",culture="neutral", AppContext: , InstallMode: -4
MSI (s) (8C:B4) [20:31:33:808]: Pathbuf: 0, pcchPathBuf: 0
MSI (s) (8C:B4) [20:31:33:840]: MsiProvideAssembly is returning: 1607
MSI (s) (8C:B4) [20:31:33:840]: Note: 1: 2318 2:
MSI (s) (8C:B4) [20:31:33:840]: No System Restore sequence number for this installation.
MSI (s) (8C:B4) [20:31:33:840]: Unlocking Server
MSI (s) (8C:B4) [20:31:33:980]: PROPERTY CHANGE: Deleting UpdateStarted property. Its current value is '1'.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Transforming table InstallExecuteSequence.
MSI (s) (8C:B4) [20:31:33:980]: Note: 1: 2262 2: InstallExecuteSequence 3: -2147287038
MSI (s) (8C:B4) [20:31:34:011]: Product: Microsoft Office Project Standard 2010 - Update '{35347883-0E64-45B4-88A0-1881DE05E259}' could not be installed. Error code 1603. Additional information is available in the log file C:\WINDOWS\TEMP\MSI1f79e.LOG.
MSI (s) (8C:B4) [20:31:34:011]: Windows Installer installed an update. Product Name: Microsoft Office Project Standard 2010. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Update Name: {35347883-0E64-45B4-88A0-1881DE05E259}. Installation success or error status: 1603.
MSI (s) (8C:B4) [20:31:34:011]: Note: 1: 1708
MSI (s) (8C:B4) [20:31:34:011]: Product: Microsoft Office Project Standard 2010 -- Installation operation failed.
MSI (s) (8C:B4) [20:31:34:011]: Windows Installer installed the product. Product Name: Microsoft Office Project Standard 2010. Product Version: 14.0.4763.1000. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202cf.msp
MSI (s) (8C:B4) [20:31:34:011]: Unable to delete the file. LastError = 32
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202d0.mst
MSI (s) (8C:B4) [20:31:34:011]: Unable to delete the file. LastError = 32
MSI (s) (8C:B4) [20:31:34:011]: Deferring clean up of packages/files, if any exist
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202cf.msp
MSI (s) (8C:B4) [20:31:34:011]: Attempting to delete file C:\WINDOWS\Installer\5a202d0.mst
MSI (s) (8C:B4) [20:31:34:011]: MainEngineThread is returning 1603
MSI (s) (8C:24) [20:31:34:011]: No System Restore sequence number for this installation.
MSI (s) (8C:24) [20:31:34:011]: User policy value 'DisableRollback' is 0
MSI (s) (8C:24) [20:31:34:011]: Machine policy value 'DisableRollback' is 0
MSI (s) (8C:24) [20:31:34:011]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (8C:24) [20:31:34:011]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:24) [20:31:34:011]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (8C:24) [20:31:34:027]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (8C:24) [20:31:34:027]: Restoring environment variables
MSI (s) (8C:24) [20:31:34:027]: Destroying RemoteAPI object.
MSI (s) (8C:48) [20:31:34:027]: Custom Action Manager thread ending.
MSI (c) (F4:1C) [20:31:34:027]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (F4:1C) [20:31:34:027]: MainEngineThread is returning 1603
=== Verbose logging stopped: 7/05/2014 20:31:34 ===

Invalid I/O node config error while passing project reservations to APO

Guys,
I had created a Project with WBS Element, Network & Internal activity in ECC Project Systems. This data was ciffed and seen in APO without any issue.
Upon creating a Material component, as a reservation, under network activity in PS and releasing it, there is an error in the APO side log(SLG1) as shown below.
Source system: xyz, user: abc transaction:CJ20N function module:/SAPAPO/CIF_PRJ_INBOUND
-----Error start--
New order (warning)
Error in activity of operation 0010 order 4001740(warning)
Invalid I/O node configuration (error)- Message no. /SAPAPO/OM_ERROR258
Diagnosis-The I/O node cannot be scheduled using the value combination specified.
--Error end--
Error while processing project order: 000001234- (error)- Message no. /SAPAPO/PRJ003
------Log Information
The registered objects of the queue are marked as faulty - Message no. /SAPAPO/CIF_ERRHDLG604
CIF error handling activated - Message no. /SAPAPO/CIF_ERRHDLG504
End of processing registered for RFC 00000001 of the LUW with ID xxx
Message no. /SAPAPO/CIF_ERRHDLG605
checked the APO post processing and manaully triggered the transfer of selected order . even then order reservation wasn't pushed to APO.
Would appreciate if any one can provide with info on why this error is being produced and ways to resolve it!!!
Thanks

please check if you have any issues under network activity..if you could not find any please try to debug the failed queue with the help of your Abap counterpart. here is the process
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0d1265d-db32-2b10-79ba-ccf6fe2c161d

Project 2010 Gantt Bar Edit error

I am writing some Project 2010 VBA, and I have a section that deals with Gantt Bar settings. I run into an "Arugment is not valid" error at this line when running my module:
Application.GanttBarStyleEdit Item:="Task", From:="Start", To:="Finish", MiddleColor:=pjMaroon, MiddlePattern:=pjMediumFillPattern, LeftText:="Start", RightText:="Finish"
All of that should be valid. So, why is there an error?

Mr. Lee,
Actually if you look at the Gantt Bar Styles Edit window you will see that there is no "Start" and "Finish", hence the bad argument error. Instead use "Task Start" and "Task Finish".
Hope this helps.
John

"Project Duration" error when burning

I have a 2x Superdrive in an iMac G4 800Mhz, and I am using iDVD (ver. 5.0.1) to burn a iMovie HD (ver. 5.0.2) file to a 2x DVD. When I hit the "burn" button in iDVD, I get the following error message:
"Your project exceeds the maximum allowed content duration. You will not be able to burn your DVD while your Encoder Setting is Best Performance. This can be changed in your iDVD Preferences."
First of all, my project is only 29 minutes long. So, the project duration should not be an issue. Second, when I go into the iDVD Preferences and change the Encoder Setting from Best Performance to Best Quality (as the error message suggests), I am able to begin the burning process, but I eventually get this error message:
"Error during rendering/encoding."
I have 21 GB (out of 60 GB) of free space on my internal HD, and I have 29 GB (out of 60 GB) of free space on my external HD. The external HD is where my iMovie HD file is located, as well as my iDVD project.
Can anyone help me burn this to DVD?

I can think of two factors that might lead to this problem. the first is that, since your project length is under an hour, iDVD will probably try encoding it using "Best Performance" settings. Check Preferences>General>Encoder Settings to see if this is the case. A quick fix might be to simply change this to "Best Quality" instead, which accomodates longer DVDs.
As for how a 29 minute DVD can exceed the maximum duration of a disc, there is a problem a few people have had with transferring iMovie projects into iDVD (myself included) where the project length mysteriously doubles in iDVD. Annoying for small projects like yours but deadly for those exceeding 1 1/2 hours.
...check your status tab and confirm that your project is indeed 29 minutes still and not something like 58. if your footage has in fact doubled in length please see this post:
http://discussions.apple.com/thread.jspa?threadID=258610&tstart=0
for possible solutions and/or commiseration.
Best luck!
Chris

Project duration error requiring DVD+RDL disc

When going to burn a project, I encountered a project duration error. It read: "Your project is too large for a single-layer disc. Insert a double-layer disc." So I ran out and picked up a stack of DVD+RDLs, came back, and popped one into my SuperDrive. Alas, I am still receiving the same error message. Ideas anyone? (The DVD+RDLs are the Memorex brand.)

Did you tell iDvd you are now using DL Media as opposed to SL? (This is one item the app doesn't yet detect on it's own).
Btw .... if you are still having issues even after addressing the correct settings, then you may wish to consider trying Verbatim or Maxell as opposed to Memorex. The 2 former brands are a bit more reliable on most macs than Memorex.
Click Here:
Message was edited by: SDMacuser

MS Project 2010 Product Key Activation Error

Hello,
Our company purchased a version of MS Project 2010 a few years ago and it was installed on a laptop in our office and was working without any issues. However, that laptop recently had a virus issue and it needed to be completely cleaned off and rebuilt.
So now I am reinstalling all the software that was on that laptop. When I try to install the MS Project 2010 for that laptop it says that the Product Key is good and lets me install Project, but when I open Project it asks to Activate the version using
the Key online. When I say yes, it says that the Product cannot be activated because the Key is not valid.
Why won't it let me activate? It is the same version that was previously installed on the same laptop? Please let me know what I need to do to activate this software. Thank you.
- Sarah

smonville1,
I think this is an issue you'll have to resolve by contacting Microsoft directly. Have your key available when you talk to them.
John

Creation of a Multi-Year Product Roadmap in Project 2010

I am looking to see if I can efficiently create a product roadmap using Project 2010. For a given business unit in our corporation I have product categories and under those categories I have products and/or projects I want to show on a timeline. I
was able to brute force this into a timeline but I would think there is an easier way to do this.
For example, I would like to be able to put the description of the product/project inside the bar on the ghantt chart but I get an error when I try to do that. I increased the bar height to allow for legible text but still no luck.
I want each entry for a given product category to automatically produce a bar of the right color with starting and ending symbols as needed based on the type of entry I add (product versus project).
Is there any way to add an outline to the bars of different colors to designate the difference between a sustaining, anticipated, active, and discontinued product or project?
Or would I be better served to go find an aftermarket piece of software that will do this type of work instead of trying to use MS Project for something it wasn't specifically designed?
Thank you for any feedback.
Andy

Hi Andy,
Here is a
tutorial that might help you coloring your bar style. This is based on the resource name but you could have a custom field with your product category which trigger a flag then the bar style will be formated
based on the flag.
Then about the description in the bar, I'm afraid this is not intended for this purpose. What about the note fields?
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

"Invalid Binary" error on app. Apple's reason is "Missing 64-bit support" due to changes from Feb 1st 2015

Hello
Can anyone help me with an "Invalid Binary" error on my app.
Apple's response is:
Dear developer,
We have discovered one or more issues with your recent submission for "DPS Notes". To process your submission, the following issues must be corrected:
Missing 64-bit support - Beginning on February 1, 2015 new iOS apps submitted to the App Store must include 64-bit support and be built with the iOS 8 SDK. Beginning June 1, 2015 app updates will also need to follow the same requirements. To enable 64-bit in your project, we recommend using the default Xcode build setting of “Standard architectures” to build a single binary with both 32-bit and 64-bit code.
Once these issues have been corrected, use Xcode or Application Loader to upload a new binary to iTunes Connect. Choose the new binary on the app’s Details page in My Apps on iTunes Connect, and click Submit for Review.
Regards,
The App Store team
Can someone from the Adobe DPS team let me know how I can recreate the .ipa file so that it will meet Apple's requirements.
They seem to have moved the goalposts since I created the original .ipa file in December. I thought I'd submitted it, just went back through iTunes Connect to check info as I hadn't heard anything from them, then hit this brick wall. Any help offered would be much appreciated.
Thanks
Rebecca

Hi
I've Updated App Builder, gone back to the DPS App Builder portal, regenerated new zip and ipa files and downloaded them.
I clicked the Application Loader 3.0 link, downloaded the latest Appication Version, clicked on the "Deliver your App" button, and submitted the newly built App that was built using 32.4.2 version. (All the app icons were listed as "stored on server" so I presume they are all ok). The .zip file appeared to 'deliver' to Apple successfully. I've tried to resubmit it but get ta "Redundant Binary Upload. There already exists a binary upload with build version..." error message, so presume the orginal binary upload was successful. I have no idea how I can get this app from the "prepare for submission", to "in review". The last time I thought I'd submitted this app I got as far as the "waiting for review" status, and no further.
At the moment I don't have a"+" button in the Build section - as mentioned on page 66 of Adobe's Step_by_step_guide_to_dps_se.pdf.
So I can't add the new .zip file to the iTunes Connect > My Apps portal in the Build section of the Versions tab.
I have put a support email into Apple, but don't expect a reply any day soon.
The problem with starting all the way back through the App wizard is that I really want to use all the same App Name, Bundle ID, and details etc.
Do you mean, going back to the Folio Producer Panel, and building a whole new App?
This process certainly isn't for the faint-hearted!
HELP!

Case When Statement and ORA:01722 Invalid number error

Hi folks, I have posted this under another heading as well under E-business suite so apologies if some you have already seen it but I would really appreciate some help on this one. Any suggestions are most welcome.
We are trying to put together a calculation that returns the number of days absent an individual has had in a given time period. We need to cater for those absences that started before the period and are closed during it, absence that start during the period and end after it, and those that open and close within it.
The period is always a rolling 6 months from sysdate.
This is the calc we have come up with so far which works for some people but we get the invalid number error if the absence includes a half day - so 0.5, 1.5,etc.
This is probably over complicated but we are not techie at all so are learning as we go!
We are using the HRMS - Administration - Oracle Human Resources (Core) business area in 10G and the Absence Attendance and Person folders.
SUM(TO_NUMBER(NVL(( CASE WHEN Absence Attendance.Actual Start Date < TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') THEN ( CASE WHEN Absence Attendance."Actual End Date" > SYSDATE THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),SYSDATE) ) ELSE ( CASE WHEN ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) END ) END ) END ) IS NULL THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),SYSDATE) ) ELSE ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) END ) END ) END ) END ) END ) ELSE ( CASE WHEN ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) END ) END ) END ) IS NULL THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),SYSDATE) ) ELSE ( CASE WHEN TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY') >= Absence Attendance.Actual Start Date THEN ( WORKING_DAYS_BETWEEN(TO_DATE(ADD_MONTHS(SYSDATE,-6),'DD-Mon-YYYY'),Absence Attendance."Actual End Date") ) ELSE ( CASE WHEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") ) IS NULL THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( CASE WHEN SYSDATE <= Absence Attendance."Actual End Date" THEN ( WORKING_DAYS_BETWEEN(Absence Attendance.Actual Start Date,SYSDATE) ) ELSE ( Absence Attendance.Duration Days ) END ) END ) END ) END ) END ),( DAYS_BETWEEN(Absence Attendance.Actual Start Date,Absence Attendance."Actual End Date") )),'999999990D00'))

Hi,
It could be that this is because you are using SYSDATE which contains the time as a fraction rather than TRUNC(SYSDATE) which just contains the current time. It could be that your working_dates_between raises this error.
However, your formula is far more complicated than it needs to be.
Firstly, you want to look at the date window ADD_MONTHS(TRUNC(SYSDATE), -6) to TRUNC(SYSDATE). Then you want to look at the portion of the absence that falls in the date window. This is GREATEST(Absence Attendance.Actual Start Date, ADD_MONTHS(TRUNC(SYSDATE), -6)) to LEAST(NVL(Absence Attendance."Actual End Date",TRUNC(SYSDATE)), TRUNC(SYSDATE)). You may need to add 1 to the absence end date because this is the last day of their absence rather than the date they return. It depends how you calculate the days between the start and end
date of the absence. You can create calculations for the start and end date of the absences within the 6 months time window. Create calculation AbsenceStart as
GREATEST(Absence Attendance.Actual Start Date, ADD_MONTHS(TRUNC(SYSDATE), -6))
and AbsenceEnd as
LEAST(NVL(Absence Attendance."Actual End Date",TRUNC(SYSDATE)), TRUNC(SYSDATE))
Then you need to only pick up absence that a part of the absence in your 6 month date window. You can use a condition in the workbook or a condition in a case statement to do this. You then need to calculate the difference between these dates and SUM all the values.
SUM(CASE WHEN AbsenceEnd >= AbsenceStart THEN WORKING_DAYS_BETWEEN(AbsenceStart, AbsenceEnd) END)
That's it. Not so complicated after all.
Rod West

Invalid Duration error in MS Project 2010

Similar Messages

Maybe you are looking for