Invalid/Failed SIM Error

Since updating to IOS7.0.3 last night on my 5 I now get SIM Failed or Invalid Sim Error Message.  I shut it down,took out the card, toggle airplane mode and nothing seems to work.  Any ideas?

Maybe you should consider getting a replacement SIM from your carrier...

Similar Messages

  • IPHONE 5 INVALID SIM ERROR SOLUTION READ THIS

    PLEASE READ THIS IF YOU HAVE ISSUE WITH YOUR PHONE 5  SHOWING INVALID SIM ERROR
    I'VE BEEN HAVING THIS ISSUE FOR ABOUT A WEEK NOW AND APPARENTLY REBOOT WILL FIX IT TEMPORARILY BUT IT WILL GO BACK TO INVALID SIM AFTER HOURS OR DAY..AFTER TALKING TO APPLE SUPPORT HE WAS VERY CONCERN ABOUT THE ISSUE SO I OPENED A CASE WITH APPLE AND THE REP GAVE ME HIS DIRECT NUMBER..ITS BEEN 2 DAYS SINCE I'VE TALKED TO APPLE AND THE SAME DAY I WENT TO ATT CORPORATE STORE AND THEY REPLACE MY SIM CARD WITH A NEW ONE AND SINCE THEN I HAVEN'T HAD ANY ISSUES SO FAR.
    HERE IS WHAT I AM THINKING :THE ISSUE MOST LIKELY IS THE SIM CARDS ,THESE SIM CARDS ARE CALLED NANO SIM CARD AND THEY ARE SUPER SMALL AND SOMETIMES THE PHONE CANNOT READ THE THE SIM CARD RIGHT AND THE MESSAGE APPEARS..
    PLEASE LET ME KNOW IF ANYBODY KNOWS MORE ABOUT THIS ISSUE.
    REMEMBER FOR REPLACING YOUR SIM CARD DO NOT GO TO AUTHORIZED RETAILERS UNLESS YOU WANT TO PAY $25 DOLLARS FOR GETTING A NEW SIM CARD, THE WIRELESS COMPANY'S CORPORATE STORES WILL REPLACE YOUR SIM CARDS AT NO CHARGE..

    Replace the SIM.

  • Why would a factory-unlocked Iphone get an invalid SIM error?

    I bought 2 unlocked iPhones to sell overseas and they are giving an invalid SIM error.  Both of them are the factory-unlocked version.  Could someone help me with this?

    Positive that they are unlocked.  I bought them personally at an Apple Store and the invoice says unlocked iPhones (I also paid the unlocked iPhone price).
    The Cell Service Provider has iPhone as one of its supported phones.  Not sure exactly which MicroSIM the person is using though.

  • After upgrading to iOS 7.0.6, I get intermittent "invalid SIM" error.

    After upgrading to iOS 7.0.6, I get intermittent "invalid SIM" error where the carrier strength (top left corner) should be.   Of course I loose all data and cellular connections at that time.   The only workaround is to power the device off and back on.   I have to do this at least once every 2 or 3 days since the upgrade to 7.0.6.   Anyone else having SIM related errors since the upgrade? 
    This happened once before when I first updated to iOS 7.   The next patch that Apple sent out resolved the issue, and I haven't seen it again until now.
    I hear 7.1 may be coming out as soon as next week.   Any chance this issue is resolved in that release?

    Thanks for the input.  That link shows steps that I've already taken.  I know it sounds weird, but I believe it may be software related.  Like I said before, this happened once before when I first upgraded to iOS7.   I lived with the issue, having to reboot the phone every couple of days, until the next update from Apple.  Once they sent out the next update, the problem went away. 
    If it is not software related, then it must be a corruption of the software download and installation.  I did it over the air.  Possibly downloading whatever release comes out next will fix it because it's a new installation.  The software itself may not have the fix in it, but the act of downloading and installing the new software may fix it.  Just a thought...

  • TS1367 I have MacOS 10.5.8. It is not booting. It stops at the blue screen. I used the disc utility - verify disc. I get the following message - Invalid sibling link. Volume check failed. Error: Filesystem verify or repair failed. Please give a solution a

    I have MacOS 10.5.8. It is not booting. It stops at the blue screen. I used the disc utility - verify disc. I get the following message - Invalid sibling link. Volume check failed. Error: Filesystem verify or repair failed. Please give a solution anybody?

    Many times I tried to simply update from 10.5.8 without any success. It starts and after few minutes ...
    I used many different install disks (I bought ofiicial release from Mac seller), so I think this is not a problem with wrong version or bad install disk. A few days ago I've got back my computer from Apple  technical support and technician told me he had this same problem with system installation

  • I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Any suggestions?

    I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Also most of the time, the SMS are not sent nor received...
    The phone was checked by my carrier (phone company, Movistar) and they replaced the micro SIM card. bear in mind that there's no Apple shop here and the Iphone 4S is NOT available in Argentina!!!
    Any suggestions?

    Dear all,
    (THIS CONCERNS MTC TOUCH CUSTOMERS IN LEBANON)
    I've received an email with a solution to the problem; you have to update to the new iOS 5.0.1 firmware (9A406)!! It's been 1Hour and so far my iPHone 4S is working just fine. Please follow carefully the below instructions:
    RUN A FULL BACK UP BEFORE DOING ANY OF THIS
    1. Download the new iOS 5.0.1 firmware (9A406) from the internet. (800MB)
    2. Connect your iPhone 4S to iTunes.
    3. Once connected, two options will show: ‘restore’ and ‘check for update’.
    4. Press down SHIFT and choose ‘check for update’. (if you click ‘check for update’ without pressing down SHIFT doesn’t work.)
    5. Select the new firmware (9A406). Note that the file should be renamed ‘iPhone4,1_5.0.1_9A406_Restore.ipsw’  (instead of ‘iPhone4,1_5.0.1_9A406_Restore.zip’), i.e. changing the file extension from ZIP to IPSW. iTunes will now work alone and update your iPhone 4S.
    A full back up is recommended before firmware upgrade.
    HOPE THIS HELPS

  • Does anyknow the cause of an Invalid SIM error cause and fix?

    I was in the middle of a call when my 4S suddenly dropped the call and gave an "Invalid SIM" error. I had to restart to get it back to normal but the call kept dropping repeatedly on the next 3 attempts after lasting only a few seconds. Does anyone know the cause and how to fix? I'm on AT&T and my phone is less than a month old.

    I've read many threads here that always seem to say that this means cube files are corrupted and to delete everything and reprocess.  There's a couple problems with this.  First of all that is not acceptable if you are in a production environment with a large cube application to just trash it and wait hours/days to reprocess a new one.  Second, the files it throws the error messages for are always there and readable from IE (XML format).  Scanning through the files, I see no funny characters or other things that would lead one to believe the file is corrupt.

  • Online backup getting failed with error BR0278E - Invalid Argument

    Hi All,
    Online backup in Production system is getting failed when taken using DB13.  Last week the SAP Production Server was migrated to SAN and it was up & running fine.
    SAP System - ECC 6
    OS                - AIX 5.3
    Database      - Oracle 10g
    Even the Archive log backup has been successful, but Online backup is failing.  Following is the error log:
    BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
    BR0057I Backup of database: RTP
    BR0058I BRBACKUP action ID: bebkzprw
    BR0059I BRBACKUP function ID: ant
    BR0110I Backup mode: ALL
    BR0077I Database file for backup: /oracle/RTP/sapbackup/cntrlRTP.dbf
    BR0061I 41 files found for backup, total size 97416.297 MB
    BR0143I Backup type: online
    BR0112I Files will not be compressed
    BR0130I Backup device type: tape
    BR0102I Following backup device will be used: /dev/rmt3.1
    BR0103I Following backup volume will be used: RTPB01
    BR0289I BRARCHIVE will be started at the end of processing
    BR0134I Unattended mode with 'force' active - no operator confirmation allowed
    BR0208I Volume with name RTPB01 required in device /dev/rmt3.1
    BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
    BR0226I Rewinding tape volume in device /dev/rmt3 ...
    BR0351I Restoring /oracle/RTP/sapbackup/.tape.hdr0
    BR0355I from /dev/rmt3.1 ...
    BR0241I Checking label on volume in device /dev/rmt3.1
    BR0242I Scratch volume in device /dev/rmt3.1 will be renamed to RTPB01
    BR0280I BRBACKUP time stamp: 2009-09-10 12.00.46
    BR0226I Rewinding tape volume in device /dev/rmt3 ...
    BR0202I Saving /oracle/RTP/sapbackup/.tape.hdr0
    BR0203I to /dev/rmt3.1 ...
    We have checked using different tapes, restarted SAP, etc but could not resolve it.
    Please suggest further.
    Thanks
    Vamsi

    Hi Vamsi
    Please go through below link
    Re: onLine backup fails with error BR0278E
    There is similar problem with the exact error you are facing for online backup and its solution is given in above link.
    Let us know if this information was useful to you.
    with regards,
    Parin Hariyani

  • Oracleasm lib failed to load with "Invalid module format" error

    Hi,
    I'm tring to install the oracleasm lib onto our hardened Redhat EL5 server
    I've download the oracleasm rpm from this page http://www.oracle.com/technology/software/tech/linux/asmlib/rhel5.html.
    We're using Redhat 5 U 2
    [root@PG673 modules]# uname -rm
    2.6.18-92.el5 x86_64
    [root@PG673 modules]#
    The package I downloaded is an exact match with our kernel version
    [root@PG673 modules]# rpm -qa | grep asm
    oracleasm-2.6.18-92.el5-2.0.5-1.el5
    oracleasm-support-2.1.3-1.el5
    oracleasm-support-2.1.3-1.el5
    oracleasm-2.6.18-92.el5-2.0.5-1.el5
    oracleasmlib-2.0.4-1.el5
    oracleasmlib-2.0.4-1.el5
    [root@PG673 modules]#
    RPM installation went well, but when we run the /etc/init.d/oracleasm configure command, we hit the following error
    [root@PG673 other]# /etc/init.d/oracleasm configure
    /etc/init.d/oracleasm: line 207: /usr/sbin/oracleasm: cannot execute binary file
    Later we found out that the oracleasm module haven't been loaded, so we try to load it manually, but we hit the "Invalid module format" error.
    [root@PG673 modules]# modprobe -l | grep asm
    /lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko
    [root@PG673 modules]# modprobe oracleasm
    FATAL: Error inserting oracleasm (/lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko): Invalid module format
    [root@PG673 modules]#
    As I know this error could happen if the driver version is not match with the system kernel version.
    The problem is we're already using an exact match version of driver with our system, I can't think of what to do next in order to proceed the installation.
    Really appreciate if someone could point me a direction.
    Thanks
    Mike

    Hi Mike,
    something looks a bit strange for me. On my OEL 5.4 x64 system i have just the following 3 packages:
    $ rpm -qa | grep asm
    oracleasm-2.6.18-164.el5-2.0.5-1.el5
    oracleasm-support-2.1.3-1.el5
    oracleasmlib-2.0.4-1.el5 Your packages should be I think the following:
    http://oss.oracle.com/projects/oracleasm-support/dist/files/RPMS/rhel5/amd64/2.1.3/oracleasm-support-2.1.3-1.el5.x86_64.rpm
    http://otn.oracle.com/software/tech/linux/asmlib/files/RPMS/rhel5/amd64/2.0.4/oracleasmlib-2.0.4-1.el5.x86_64.rpm
    http://oss.oracle.com/projects/oracleasm/dist/files/RPMS/rhel5/amd64/2.0.5/2.6.18-92.el5/oracleasm-2.6.18-92.el5-2.0.5-1.el5.x86_64.rpm
    Uninstall all asm packages and retry with just those three.
    Good luck!
    Cheers,
    David
    OCP 9i / 10g
    http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

  • Verisign certificate response fails with Error 9508 -empty/invalid fields

    We are trying to generate a trial 14-day Certificate Response file from Verisign. It fails with error "Error 9508 - Certificate Signing Request contains empty field(s)" when supplied with the certificate request. We have made several attempts to through transaction STRUST and via sapgenpse command to create certificate request file with unique DN which has values for CN, OU, O, ST, L, C. But no success.
    Has anyone successfully created a CSR from verisign for enable SSL in NW2004s?
    Thanks,
    Asif

    Have you tried putting all in one file and them import CSR?
    BEGIN CERTIFICATE-----
    <Base64-coded contents of the re-issued certificate>
    END CERTIFICATE-----
    BEGIN CERTIFICATE-----
    <Base64-coded contents of the certificate of the intermediate CA>
    END CERTIFICATE-----
    BEGIN CERTIFICATE-----
    < Base64-coded contents of the certificate of the root CA>
    END CERTIFICATE-----
    If yes, then try putting each cert in individual file and save it as .crt format to check all certs are ok and valid.
    -Pinkle

  • Call to WPG_SESSION API Failed. Error-Code:6550

    Can someone please help me figure out what I may be doing wrong? Using recent downloaded versions of 8i and 9iAS I cannot access Portal30 using IE5 browser. Please see error below. During portal configuration I specified connect string of oracle:1521:dba1. The connectstring entry of the DAD is dba1. I ran ssodatan. The database is open, listener is listening and SQL*Plus, DBA Studio, Net8 Assistant all connect to dba1 fine. Discussions mention cookies, upgrades, etc., but nothing definitive. Troubleshooting Guide does not reference error 6550. I am at a loss. Any suggestions would be appreciated.
    I downloaded and installed 8.1.7 on NT host oracle then downloaded and installed 9iAS on another NT host. Portal Diagnostics are successful, however I get database login failed when attempting to use IE5 browser to access portal at http://oracle/pls/portal30/PORTAL30.home
    Here's the diags:
    D:\ora9ias\portal30\admin\plsql>set ORACLE_HOME=d:\ora9ias
    D:\ora9ias\portal30\admin\plsql>diag -s portal30 -c dba1
    Begining Portal Diagnostics
    ...portal_schema: portal30
    ...portal_password: *************
    ...portal_connect_string: dba1
    Loading java class for Portal Diagnostics ...
    SQL*Plus: Release 8.1.7.0.0 - Production on Wed Jul 25 08:41:58 2001
    (c) Copyright 2000 Oracle Corporation. All rights reserved.
    Connected to:
    Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.0.0 - Production
    Creating Table 'wwsec_diagnostic$'
    Creating Sequence 'wwsec_diagnostic_seq'
    Diagnostics Report v 1.01: Oracle Portal v 3.0.9.8.0
    As of 25-Jul-2001 08:42:17 Schema Name: PORTAL30 SSO Schema Name: portal30
    _sso
    Proxy Server Settings:
    HTTP Server:
    HTTP Server Port:
    No Proxy Servers for Domains beginning with:
    URL Connection Time-Out (seconds):
    PORTAL30.wwsec_enabler_config_info$
    Login Server URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_app_admi
    n.ls_login
    DAD : portal30_sso
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30_sso
    Connect string : dba1
    Authentication mode : Single Sign-On
    Partner Application Information
    **** The Login Server (portal30_sso) ****
    Home URL : http://oracle/pls/portal30_sso/portal30_sso.home
    Success URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_home.pro
    cess_signon
    DAD : portal30_sso
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30_sso
    Connect string : dba1
    Authentication mode : Single Sign-On
    **** Oracle Portal (portal30) ****
    Home URL : http://oracle/pls/portal30/portal30.home
    Success URL : http://oracle/pls/portal30/portal30.wwsec_app_priv.process
    _signon
    DAD : portal30
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30
    Connect string : dba1
    Authentication mode : Single Sign-On
    **** The Login Server (portal30_sso) ****
    Home URL : http://oracle/pls/portal30_sso/portal30_sso.home
    Success URL : http://oracle/pls/portal30_sso/portal30_sso.wwsso_home.pro
    cess_signon
    DAD : portal30_sso
    Host connection : successful.
    mod_plsql : working.
    JServ : working.
    Schema name : portal30_sso
    Connect string : dba1
    Authentication mode : Single Sign-On
    Diagnostics completed successfully!
    Disconnected from Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
    With the Partitioning option
    JServer Release 8.1.7.0.0 - Production
    D:\ora9ias\portal30\ admin\plsql>
    Call to WPG_SESSION API Failed.
    Error-Code:6550
    Error TimeStamp:Wed, 25 Jul 2001 12:33:52 GMT
    Database Log In Failed
    TNS is unable to connect to destination. Invalid TNS address supplied or destination is not listening. This error can also occur because of underlying network transport problems.
    Verify that the TNS name in the connectstring entry of the DAD for this URL is valid and the database listener is running.
    null

    I met that error several times. Check TNS connection from web server box to database server, if applicable. - use tnsping.
    That's the only cause that produces the error. If the web server box has more than one Oracle Home, find the correct one. Check $iAS_home/Apache/bin/apachectl script which will tell you its oracle home directory. It may not use $TNS_ADMIN/tnsnames.ora, but $ORACLE_HOME/network/admin/tnsnames.ora.

  • Invalid File Name Errors when syncing to Ipod

    Ever since an update last fall I have been getting Invalid file name errors when I try to sync my ipod. A window would pop up saying "Windows could not copy 'SONGNAME' to the iPod 'IPODNAME' because an unkown error occurred (-37)." I would press OK and another window would immediately pop up that would say, "Attempting to copy to the disk 'IPODNAME' failed. the file name is invalid or too long."
    The windows would keep popping up countless times until the sync would just seem to time out and stop.
    The problem songs would have no problem playing in iTunes.
    Prior to the update this did not happen. No new songs were added around this time and nothing was changed to my file directory structure. I was too busy to troubleshoot this problem at the time and hoped that another update would fix it. Well, here I am many months and updates later and still no fix. After fiddling with iTunes and resetting my Ipod multiple times (goodbye saved angry bird games)I have found out that:
    1. By writing down the file name when the error windows pop up I can get a partial list of the problem file names. I could not get a complete list of the problem files because the sync would time out before a full list could be compiled (the list appears to be in the hundreds).
    2. If I changed the name of the file by adding OR deleting one character, remapping the song in itunes, the song would then sync properly.
    3. If I changed the name of the file, remapped the location of the file within iTunes, changed the name of the file BACK to the original name that iTunes supposedly had a problem with, and then remapped the location of the song within iTunes, the song would then sync properly
    4. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, the song would sync properly.
    5. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, moved the file BACK to the original directory, remapped the song again, the song would sync properly.
    6. If I renamed the file and then named it back to the original file name WITHOUT remapping the file location in iTunes, the song would still not sync properly
    7. If I moved the file into a different directory and then back again without remapping the file location, the song would still not sync properly.
    8. Changing or deleting the tags has no effect at all.
    9. File name lengths are already under 200 characters and there are no special characters used.
    So, to sum up, I have found out a way to fix the issue. The problem is, that there are hundreds of songs that appear to be affected and renaming or moving every single one individually and then remapping is extremely inefficient and ignores the cause of the problem. I also did not want to delete the itunes library and then add all of the songs back in because I have many custom playlists that I have spent hours creating and I do not want to delete them.
    Is there a better way to fix the problem? Especially if someone knows the root cause?

    I got a procmon log file and examined it. I have the file and I could also provide you with that or screenshots of it.
    There is nothing unusual about it. I can see entires in which CR has successfully opened the report and has cached in a c:\windows\temp.
    However there is one or two non-successful entries that may be related, especially that examining the stack trace brings us to a call to get_ProductLocaleID():
    - A call to read reg entry HKU\S-1-5-20\Software\Business Objects\Suite 12.0\Crystal Reports\Locale fails with NAME NOT FOUND.
    - immediately after that and from the same process (w3wp.ex) there is a call to open directory "c:\" which is logged as ACCESS DENIED.
    Any subsequent unsuccessful calls seem to be results of exception handling in the debug code.
    Does this point to any setup issues with CR? We always run the redistributable x86 runtime when installing it.

  • I have the appropriate Adobe Acrobat 9 Standard software and a valid SN for that software; however, am getting an "Invalid Serial Number" error on installation...please help

    I have the appropriate Adobe Acrobat 9 Standard software and a valid SN for that software; however, am getting an "Invalid Serial Number" error on installation...please help

    Hi James ,
    Make sure you are entering the correct serial number.Try it once again and check.
    If it fails please get in touch with Adobe Support.Here is the link for the same.
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    Regards
    Sukrit Dhingra

  • Window 8.1 update & invalid security certificate errors

    I set up my new PC 2 days ago running Windows 8.1. I was able to visit all websites, including secure ones, w/no issues via Firefox. Last night, suddenly I was unable to access many secure websites. These include Google (Gmail) & Ilines (email). Here is a copy of the Google error:
    "mail.google.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer)"
    There is no button to bypass, as I have seen in the past. I tried deleting cert8.db which didn't resolve anything. I have also tried adding exceptions which also don't resolve the issue.
    I searched support & found the link for the MS document (link below) indicating that FF & Windows Family Safety certificates are not playing nice.
    http://support.microsoft.com/kb/2965142/en-us#appliesto
    I tried to follow the guide, but when I get to step 6, there is no Microsoft Family Safety Certificate in the Trusted Root Certificates Authorities to export. For reference, I do not specifically have Family Safety enabled & am running my PC as admin, no other users. I personally have no use for this but it is my understanding that it cannot be uninstalled, either.
    I have spent hours researching & making adjustments to different settings to no avail. It is frustrating enough setting up a new PC & transferring info w/out this extra hassle. Does anyone have any other suggestions? FF is my preferred browser, but if this can't be resolved I will need to use something else so that I can access these important websites.

    Thanks for the feedback cor-el. Here are the results:
    1. Installed Kaspersky certificate per link= no change
    2. Turned off Kaspersky= able to log in to Gmail but not the other secure sites I am having probs with
    3. Booted in Safe Networking mode= able to log in to Gmail but not the other secure sites. Same blocking errors on Gmail, etc when returned to reg mode.
    Just FYI, I get 2 different secure connection errors:
    Gmail: "mail.google.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer)"
    Ilines: "Secure Connection Failed An error occurred during a connection to mail.ilines.net. Peer's certificate has an invalid signature. (Error code: sec_error_bad_signature)"

  • Backup failed with Error: (-50) Creating Directory

    Repeats ad nauseum.
    This is backing up to a second internal drive that is an exact duplicate (in terms of HD model and size).
    Does anyone know what Error -50 means? Lack of permissions? Invalid name (doesn't seem like it)?
    8/30/08 9:06:37 AM /System/Library/CoreServices/backupd Starting standard backup
    8/30/08 9:06:37 AM /System/Library/CoreServices/backupd Backing up to: /Volumes/Sliffy Time/Backups.backupdb
    8/30/08 9:06:58 AM /System/Library/CoreServices/backupd Error: (-50) Creating directory 2008-08-30-090658.inProgress
    8/30/08 9:06:58 AM /System/Library/CoreServices/backupd Failed to make snapshot container.
    8/30/08 9:07:03 AM /System/Library/CoreServices/backupd Backup failed with error: 2

    Hi Glenn,
    Thanks for the suggestion. Nope, it's not listed. The only thing listed is my Time Machine volume.
    After a reboot, Time Machine seems to be working. It's making backups on schedule and the logs look good, not reporting any strangeness.
    A bit bummed about these phantom errors that go away on reboot. I'll keep on eye on the error/reboot frequency.
    Rob

Maybe you are looking for