Invalid field format (screen error)
We are using custom module pool report for displaying information. Information display in Table control which has also Radio button option for the further processing. After unicode conversion we are getting error while accessing the screen as "Invalid field format (screen error)" when user select Radio button. In production environment we are not facing any issue, but in Dev + Qas we have this issue. Nothing is changed as all environment are sync. To solve the issue we re-defined the Radion screen element, but no success we are still getting same error. I am not sure whether it is related to Page Format or something else. Could you please let me know whether anybody faced this issue ? For the information, I already searched on SDN and SNote, but there is no post or SNote
Have you checked if there are overlapping fields on the screen.
I've seen simular errors and usually it was beacuse of some change by SAP that made it so that the defined length of the screen field was suddenly to small.
I'm not saying that this is the case in your situation, but it never hurts to try and change the length of your screen field and see if that resolves the issue.
Arthur
Similar Messages
-
Invalid field format (screen error) on Table Control
Hello,
When selecting a line or multiple lines on a screen made by me(using a Table Control), I get Invalid field format (screen error). Debugging the code it sends the message when looping the internal table on PAI to check if there were values changed. Is there a reason why this error appears on this?
loop at it_values.
chain.
field pvalues-BEGDA.
module CHANGE_QUEUE.
endchain.
endloop.
Thanks.No need to loop to check whether data is changed after PBO, just check System Field SY-DATAR, it will be set to 'X' if any field was changed.
So the following code is enough;
IF SY-DATAR EQ 'X'.
PERFORM SAVE_DATA.
ENDIF.
Regards
Karthik D -
Error in module program - Invalid field format( screen error )
In the module program i have added 1 input field named gv_pallet of 1 character. while processing the transaction when i put value 1 in this input field and press a button i am getting error ' Invalid field format( screen error ) .
I am not geting any clue whats the eror . can anyone able to tell me the error.
Point will be guranted .
RegardsNo need to loop to check whether data is changed after PBO, just check System Field SY-DATAR, it will be set to 'X' if any field was changed.
So the following code is enough;
IF SY-DATAR EQ 'X'.
PERFORM SAVE_DATA.
ENDIF.
Regards
Karthik D -
Error Invalid field format (screen error) in module pool
Hi
experts i am doing module in whichi had many check boxes on screen and each check box has function code means i want to do some thing else . but as i click the first or any other check box i get a error message
INVALID FIELD FORMAT (SCREEN ERROR).
Can anyody help me with this asnwers will be rewarded points .
regardsDear Farukh,
can you please let me know how have you declared you check boxes.
how did you handle the click or the function codes in the user command module in your PAI.
The declaration of your fucntion codes can be done when you create your screen fields and then they need to be handled in the user command module i.e what you want to do when suppose you click on that particular check box.
Thanks
venugopal -
Dialog Screen - Invalid field format (screen error)
Dear all,
I have developed a modal dialog screen and succesfully invoked it with CALL SCREEN command in the main screen. Unfortunately, it always returns "Invalid field format (screen error)" when clicking on the dialog's GUI control such as button or radio button. Anyone encountered this before??
Regards,
KKHi KK,
Just make sure that the fields take on the screen are also declared in the top module of your program.
And also match their data-types and size i.e., declared in top module and on the screen in their respective attributes.
Hope this solves your problem.
Thanks & Regards,
Tarun Gambhir -
Search Help error : Invalid field format Screen error
Hi All,
I have attached a search help to contract field for contract no and item number. (in my own screen developed in a report)
The search help picks up data and assigns it to the fields,
But after this when I click on any other button, I get error saying :
<b>Invalid Field Format (Screen Error) !!!</b>
Any pointers guys !!!
Warm Regards,
Girishscreen checks in abapautomatically checks for format of field when u enter data....i.e date, integer etc...the problem in this case is that when u seelct a value using the help it is filling a value which is not the correct format...so check for the data types and test it again...this is definitely the problem.
-
Hi,
We upgraded a system from 4.6C to ECC 6.0, and we have a problem in G/L account balance report.
In the period field, fields are not seen with their default values when the report is run, and additionally when we write a period to the field, an error occurs and the message is: " Invalid field format (screen error) "..
An additional error is about the field descriptions. Some of the field descriptions are not seen in the screen, for example, normally in report F.08 in 6.0, the last check box field's description is: "Totals of all company codes", but there is nothing for that field in the upgraded system.
Is there common thing for the reports? or how can I make this report run?
Thank you,
Gul.Hello,
I have solved the problem by regenerating the programs from SE38..
Thanks. -
I developed a script for processing .tdms files in DIAdem 11.1, now I'm deploying the script on the very PXI system that created the .tdms files. This system had DIAdem 11.0, but when I try to open (DataFileLoadSel) the tdms file in my script I get the error message:
"D:\MyFileName.tdms" has an invalid fiel format. (Error no. 11)
The tdms files are created by a LabView application.
If I delete the correspondin .tdms index file, I get a little further, it loads the first two of four groups, using DataFileLoadSel on the first group, and DataFileLoadRed on the 2nd group, on third group, another DataFileLoadRed, I get the following error:
Error in <MyScript> (Line: x, Column: y):
Cannot load the file "D:\MyFileName.tdms" with the loader "TDMS"
Further information:
Cannot open the file "D:\MyFileName.tdms".
Is there a difference between DIAdem 11.0 and 11.1 that affects the import of .tdms files, if so, can I get around it?
Thanks,
Eric
Solved!
Go to Solution.Hello eberg,
Before we go into more detailed error trapping, could you please try to install the TDMS 2.0 format on the DIAdem 11.0 computer (DIAdem 11.1 and LabVIEW 2009 come with the TDMS 2.0 stuff already installed).
Please get the download here: http://zone.ni.com/devzone/cda/tut/p/id/9995
Once installed, please try running the Scripts again (in DIAdem 11.0) and let us know if that fixed the issue. It might not help to install this, but it's a quick thing to try before we dig deeper into the issue.
Best regards,
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary." -
Hello,
I just downloaded and installed Vivado 2013.4 on my Xubuntu 12.04 machine. But when I try to add IP from the IP catalog, as in the ug937 Lab1 step2, it fails with obscure error messages (see below).
Here's basically what I did:
-In the Flow Navigator, i select the IP Catalog button.
-In the search field of the IP Catalog, I type DDS.
-then I double-click the DDS Compiler and my error occure.
Please Help,
Jerome.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd":1]
Analysis Results[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd":1]
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
set_property target_language Verilog [current_project]
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
sources_1[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen_demo.vhd":1]
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
update_compile_order -fileset sim_1
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd":1]
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/fsm.vhd":1]
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[HDL 9-1654] Analyzing Verilog file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v":1]
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd":1]
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-2313] Loaded Vivado IP repository '/opt/Xilinx/Vivado/2013.4/data/ip'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-1704] No user IP repositories specified
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
Vivado Commands[Project 1-11] Changing the constrs_type of fileset 'constrs_1' to 'XDC'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
sim_1[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[HDL 9-1654] Analyzing Verilog file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sim/testbench.v":1]
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-234] Refreshing IP repositories
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-395] Problem validating against XML schema: Invalid value format for this type spirit:order
[IP_Flow 19-193] Failed to save BOM file '/home/jmassol/.Xil/Vivado-2683-ubuntu/coregen/dds_compiler_0/dds_compiler_0.xml'.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/debounce.vhd":1]
[IP_Flow 19-3378] Failed to create IP instance 'dds_compiler_0'. Error saving IP file.
[IP_Flow 19-194] Failed to save IP instance 'dds_compiler_0'.
[HDL 9-1061] Parsing VHDL file "/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd" into library work ["/home/jmassol/Desktop/Vivado/vivado_debug/ug937/project_xsim/project_xsim.srcs/sources_1/imports/ug937/sources/sinegen.vhd":1]
set_property constrs_type XDC [current_fileset -constrset]
We had the same problem when switching to Ubuntu 14.04, and there actually is a solution for it: make sure your locales are set to English.
$> env | grep LC_*
should only show english (or C) locales, all others are known to cause parsing errors in some numbers, usually caused by wrong string-to-float conversions (e.g. 18,29 in german is 18.29 in english). You can change the locales in the file /etc/default/localesThis is not the first time we had problems with the locale settings, Xilinx does not seem to test their software with anything else than en_US, causing obscure bugs like this one.
HTH
Philipp -
we need to configure an SSO from SAP portal and a third party website by passing encrypted userid as url parameters.
To configure the SSO I have received the public key of the third party and able to access it from server location. Now I have to access priavte key of the SAP Portal certificate and sign the UserId and pass it as url parameter. I have gone through many blogs and written code as below which is giving Invalid Keystore Format error.
My question is
1. What should be passed to FileInputStream?
As of now we are passing the .cer file which is stored as part of project.
Below code is throwing error at ks.load() method.
String fielPath1 = request.getPublicResourcePath()+"/SAPLogonTicketKeypair-cert1.cer";
FileInputStream ksfis = new FileInputStream(fielPath1);
KeyStore ks = KeyStore.getInstance("JKS");
ks.load(null, sPass.toCharArray());
BufferedInputStream ksbufin = new BufferedInputStream(ksfis);
ks.load(ksbufin, sPass.toCharArray());
PrivateKey priv = (PrivateKey) ks.getKey(alias, kPass.toCharArray());
Error is:
Invalid keystore formatsun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:633)sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)java.security.KeyStore.load(KeyStore.java:1185)am_sso_apc.doContent(am_sso_apc.java:132)com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
Please let me know how to pass the filepath to extract the priavte key .
Regards,
SatishI found the solution. As follows:
keytool -list -keytool keytoolfile -storetype jceks -
Whole number field formatted as timezone in CRM 2013 SP1UR1 gives error on saving
Hi,
I added a whole number field formatted as time zone to the appointment form and when I save the record I get an error saying
Crm Exception: Message: An unexpected error occurred., ErrorCode: -2147220970, InnerException: System.InvalidCastException: Unable to cast object of type 'Microsoft.Xrm.Sdk.OptionSetValue' to type 'System.IConvertible'.
This error is coming from the timezone field and only happens when I have data in the field. Has anyone seen this?
Thanks
Rickard Norström Developer CRM-Konsulterna
http://www.crmkonsulterna.se
Swedish Dynamics CRM Forum: http://www.crmforum.se
My Blog: http://rickardnorstrom.blogspot.seMore info, the error occurs on pipeline stage 30 of the Book or Reschedule message and the same thing happens in CRM 2015. I've started a thread on connect with URL
https://connect.microsoft.com/dynamicssuggestions/feedback/details/1128206/crm-2013-sp1ur1-cant-handle-the-timezone-field
This must be rather new because I've tried it in CRM 2011 UR late and it did not occur there, I haven't tried CRM 2013 RTM though so I can't say if it's a CRM 2013 or a CRM 2013 SP1UR1 issue.
BTW, the 2015 org was a complete vanilla so I've pretty much ruled out custom code as a culprit :)
Regards
Rickard Norström Developer CRM-Konsulterna
http://www.crmkonsulterna.se
Swedish Dynamics CRM Forum: http://www.crmforum.se
My Blog: http://rickardnorstrom.blogspot.se -
Invalid Alias Format : Table_name.Column_name required error
Hi,
Below is the query I am using in one of my columns in a report. The ELSE part is working fine. but as soon as I put in the first 2 WHEN conditions, it gives me the invalid alias format error. tried changing the column names,single quotes on numbers, but error does not seem to go.
Please help.
Thanks,
Dan
CASE
WHEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = @{PERIOD}) IS NULL THEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = 12)
WHEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = 12) IS NULL THEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = @{PERIOD})
ELSE
FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = @{PERIOD}) - FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = 12)
END
Edited by: Danny on Jun 4, 2013 12:44 PM
Edited by: Danny on Jun 4, 2013 12:44 PMNO luck :(
CASE
WHEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = '@{PERIOD}') IS NULL THEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = '12')
WHEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = '12') IS NULL THEN FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = '@{PERIOD}')
ELSE
FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR} AND "Quarter"."ACCOUNTING_PERIOD" = '@{PERIOD}') - FILTER("Fact - Investment"."FTI_FAIR_VALUE_AMT" USING "Quarter"."FISCAL_YEAR" = @{YEAR}-1 AND "Quarter"."ACCOUNTING_PERIOD" = '12')
END
Can I try making null to 0 by doing IFNULL(measure,0). IN this case how do I do it since measure column is being generated at runtime with filter function like above.
Edited by: Danny on Jun 4, 2013 1:11 PM -
whenever i try to execute this statement it gives this error msg
Invalid no format
select to_char(salary,'$10,000') from emp;desc of table is
Name Type Nullable Default Comments
EMPNO NUMBER(4)
NAME VARCHAR2(10) Y
SALARY NUMBER(7,2) Y
JOB VARCHAR2(10) Y
HIREDATE DATE Y
COMM NUMBER(7,2) Y
DEPTNO NUMBER(4) YDo you want something like this ?
SQL> SELECT TO_CHAR(sal,'$9,999,99') FROM emp;
TO_CHAR(SA
$50,00
$28,50
$24,50
$29,75
$30,00
$30,00
$8,00
$16,00
$12,50
$12,50
$15,00
TO_CHAR(SA
$11,00
$9,50
$13,00
14 rows selected.
SQL> http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/sql_elements004.htm#BABIGFBA
The above link will give you the complete information about number format models.
URL added: Saubhik on Nov 23, 2010 1:20 PM -
I forgot the code for my iPhone to access the Home screen I do , please help me
try formatting the iphone but when I put in nfc mode and connect it to the pc recognizes it and everything when you try to format the error 3004 appearsHello polo-angulo,
I apologize, I'm a bit unclear on the nature and scope of the issue you are describing. If you are saying that you are getting an error code (3004) when you try to restore your iPhone (because you could not remember your passcode), you may find the information and troubleshooting steps outlined in the following articles helpful:
Resolve iOS update and restore errors in iTunes - Apple Support
Get help with iOS update and restore errors - Apple Support
Sincerely,
- Brenden -
"Invalid Field Name" Error message on Client System
Hi all,
I have installed some addons on server, and the same is installed on client systems as well. on server everything works well. But when it comes to client systems, one particular form shows an error message, "Invalid Field Name", on loading the form.
I have the same .srf's as on server but still the problem persists. If anybody knows the cause of the problem, please let me know what could be the reason.
Regards,
Rohan S. Kamble.Hi Rohan,
Are you sure you have the same version of DI (also addon) on your client and your server side?
Reinstall the addon on your client, check if the problem still happens.
Regards,
Jay.
Maybe you are looking for
-
Open PO report with GL's and Cost Centers
Hi Gurus, Is there a report that already exists where we can run open purchase orders not received for non-inventory items that pulls the quantity, price, GL account code, and cost center account code? Thanks Anusha
-
Windows vista itunes 10.5
After downloading itunes 10.5, itunes cannot connect to Itunes Store. I have windows vista home premium on my computer. Any suggestions on fix? It gives me a message "Accessing Itunes Store".
-
SAP XL Reporter for SAP R/3 ?
Hi Experts, SAP XL Reporter is an add-on provided by SAP only for SAP Business one? Doesn't it work for SAP R/3? Is there anyway to use SAP XL Reporter in R/3 also? If so, pls let me know. Regards, Ravi
-
Udfs file system on Solaris 10
hello all, cannot find the limit of udfs file system on solaris 10. Which is the med a block size that can be used ? ANy chance to create udfs on 8192 block size media ? Thanks Aldo
-
How to remove Fields from Change Office & communication Data..
Hi, In ESS->Emp Search -->Change office and communication Data..I have to remove a field "License Plate No" as we are not using it.. How to do it.. I have Netweaver studio installed in my pc but i dont know how to use it.. could any one tell me the s