Invalid format error

Hi All
When I tried to upload a FCP project to the FCS its throwing error "Unable to analyze the project - invalid format" !!!
Please help
Thanks in advance
Rk

What version of FCSVR are you on? 1.1.1? What version of FCP are you on?
This issue was discussed here on the forums before and the resolution for some was that the user was not logged into the server itself and uploaded the FCP project via another machine's client:
"The reason i found that was causing the problem was the server was not logged in.
After logging in on the server everything was fine"
http://discussions.apple.com/thread.jspa?threadID=1481212
If that isn't helpful, try and be more detailed about the FCP project itself. Like what might be special about it? Do other FCP projects upload ok?

Similar Messages

File has an Invalid format (Error no 11)

I get a file has an Invalid format (Error no 11) message when opening a text file in Diadem 11, is there any specifics you can add to the error # 11 message, to help me resolve the error.

Hi Atlas56,
How were you loading the ASCII file into DIAdem? Using a posted DataPlugin from the web? Using a DataPlugin from a colleague? Using the ASCII DataPlugin Wizard in DIAdem? Using the ASCII Import Wizard in DIAdem? Copying and pasting values into a VIEW table?
I'm not familiar with that error message,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

External Monitor on MBP (Invalid format error)

I searched the forums and couldn't find a similar issue so here goes. I have a late 2008 MBP with Snow Leopard connected to a Vizio(MODEL#VM230XVT)LCD 1080P HDTV. I'm trying to use this in "closed lid" mode and using Apple Bluetooth mouse/KB. Because, I didn't want to buy another HDMI cable I currently have it connected via VGA with Apple adapter (DVI>VGA) and a separate audio cable running to TV I have the Bluetooth settings set to wake the device. when I shut the lid the screen goes black either states "No Signal" or "Invalid Format". I have to disconnect the external monitor in order to see the MBP screen again I have tried using several different types of Resolution without success. I notice under the resolution settings it has a "useable screen size underneath it with certain dimensions" so if I set my MBP to max resolution I believe 1400x900 (guesstimate) and set my HDTV to 1920x1080 I think underneath the resolution box I get the "useable screen dimensions which are usually the laptops screen dimension" not sure if this plays apart in anything just wanted to mention it. The TV will display if I leave the lid open on the MBP and have a resolution that exceeds 1024x768 so I'm not sure why it won't display with lid closed as well. Any suggestions would be appreciated.

Then I'd…
1) Try reinstalling WoW and try to keep as few preference/game files as you can. Granted you need to keep your character and game play files etc etc so just backup the lot and restore as required.
2) Contact Blizzard and check their forums and see if they know anything about this.

Bravia invalid format

I'm running an atv2 though an aton switch and sending it to five tvs. All work fine except a 40 in Bravia, which breaks up and gives an "invalid format" error. It will display 720p from other sources without a problem and is rated for all hd formats. There are no resolution settings on the tv so nothing to try there. Have done reset and power cycle on the atv with no luck. Have connected the same signal to a different tv and it works fine, so it appears to be the tv. Any thoughts?

wdhall wrote:
I'm running an atv2 though an aton switch and sending it to five tvs. All work fine except a 40 in Bravia, which breaks up and gives an "invalid format" error. It will display 720p from other sources without a problem and is rated for all hd formats...... Any thoughts?
Try connecting it directly to the TV to see if it's an incompatibility with the AppleTV, or something the switch is introducing into the equation.

Plugin Register Error - Assembly file name is in invalid format. Only file name is allowed.

Hi,
when I add a step in a plugin registered in disk using the 2013 or 2011 tool for CRM 2013. it got a error as below.
Assembly file name is in invalid format. Only file name is allowed.
Anyone know this? thank you.
Detailed log as below
Unhandled Exception: System.ServiceModel.FaultException`1[[Microsoft.Xrm.Sdk.OrganizationServiceFault, Microsoft.Xrm.Sdk, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]: Assembly file name (LoyaltyEngine.CRM.Main.Plugin.dll) is in invalid
format. Only file name is allowed.
Detail: <OrganizationServiceFault xmlns="http://schemas.microsoft.com/xrm/2011/Contracts" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<ErrorCode>-2147204719</ErrorCode>
<ErrorDetails xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic" />
<Message>Assembly file name (LoyaltyEngine.CRM.Main.Plugin.dll) is in invalid format. Only file name is allowed.</Message>
<Timestamp>2014-12-31T05:16:55.9984484Z</Timestamp>
<InnerFault>
    <ErrorCode>-2147204719</ErrorCode>
    <ErrorDetails xmlns:a="http://schemas.datacontract.org/2004/07/System.Collections.Generic" />
    <Message>Assembly file name (LoyaltyEngine.CRM.Main.Plugin.dll) is in invalid format. Only file name is allowed.</Message>
    <Timestamp>2014-12-31T05:16:55.9994483Z</Timestamp>
    <InnerFault i:nil="true" />
    <TraceText i:nil="true" />
</InnerFault>
<TraceText i:nil="true" />
</OrganizationServiceFault>
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at Microsoft.Crm.Tools.Libraries.RegistrationHelper.RegisterStep(CrmOrganization org, CrmPluginStep step)
   at Microsoft.Crm.Tools.PluginRegistration.StepRegistrationViewModel.btnRegister_Click(Object sender, EventArgs e)
Dynamics CRM Consulting

Hi,
Have you checked the below links.
http://mscrmdeveloper.wordpress.com/2014/09/04/problems-adding-step-to-disc-based-plugin-assembly/
http://gustafwesterlund.blogspot.com/2014/05/issues-with-new-plugin-registration-tool.html
Hope this Helps!!!
Thanks,
Prasad
Make sure to "Vote as Helpful" and "Mark As Answer",if you get answer of your question.

Invalid Keystore Format error

we need to configure an SSO from SAP portal and a third party website by passing encrypted userid as url parameters.
To configure the SSO I have received the public key of the third party and able to access it from server location. Now I have to access priavte key of the SAP Portal certificate and sign the UserId and pass it as url parameter. I have gone through many blogs and written code as below which is giving Invalid Keystore Format error.
My question is
1. What should be passed to FileInputStream?
As of now we are passing the .cer file which is stored as part of project.
Below code is throwing error at ks.load() method.
String fielPath1 = request.getPublicResourcePath()+"/SAPLogonTicketKeypair-cert1.cer";
FileInputStream ksfis = new FileInputStream(fielPath1);
KeyStore ks = KeyStore.getInstance("JKS");
ks.load(null, sPass.toCharArray());
BufferedInputStream ksbufin = new BufferedInputStream(ksfis);
ks.load(ksbufin, sPass.toCharArray());
PrivateKey priv = (PrivateKey) ks.getKey(alias, kPass.toCharArray());
Error is:
Invalid keystore formatsun.security.provider.JavaKeyStore.engineLoad(JavaKeyStore.java:633)sun.security.provider.JavaKeyStore$JKS.engineLoad(JavaKeyStore.java:38)java.security.KeyStore.load(KeyStore.java:1185)am_sso_apc.doContent(am_sso_apc.java:132)com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:213)
Please let me know how to pass the filepath to extract the priavte key .
Regards,
Satish

I found the solution. As follows:
keytool -list -keytool keytoolfile -storetype jceks

Class format error: Invalid constant pool tag found

I am simply attempting to create an instance of an object and I get Class format error: Invalid constant pool tag found. Does anyone know what this means and how to fix it?
Thanks.

If you're compiling with J2SDK 1.4 or higher, you need to use "-target 1.1" on the javac command line.
Also make sure you're not using any float constants such as 1.0 in your code.

INVALID END HEADER FORMAT error

I have just installed the Oracle 9i database on windows NT server, but the
Oracle Database Configuration Assistant returns INVALID END HEADER FORMAT error, eachtime i attempt to create a new database.
Oracle 9i software is installed, but no database was created. How can i solve this problem?
or how can i create the database manaully?
kayode,
[email protected]

Hi,
If you don't have a database error (ORA-), then you're probably hitting some sort of DBCA bug. I'd use the DBCA to generate scripts and then run the scripts manually to see if you can create a database that way.
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci1054696,00.html
Are you able to create scripts through DBCA if yes then you can create your database with help of scripts.
go through below link for manually database creation ( it is also some working in Oracle 9i. After scripts creation. Script creation is different then oracle 10g.)
http://dbataj.blogspot.com/search/label/Database%20Creation
if not then you hit bug ( according to above mention link) raise a iTAR.
regards
Taj

Can anyone advise on this error: "Timeline", Error: "invalid format", Code: "14", Note: "Unknown

Hello,
Attempting to author a basic Blu-ray disc. Everything appears to be ok when I run the build check to make sure that the disc will write out correctly. When I start to build and burn the disc, Encore begins to import the video asset, and then quits with the following error message:
Blu-ray Object: "<Timeline> Untitled Timeline", Error: "invalid format", Code: "14", Note: "Unknown exception"
Does anyone have any thoughts regarding this error? In the project timeline, everything plays ok - picture and sound. I am importing a MPEG-2 file that came out of Compressor as an .m2v file. Not sure if this could be the cause of the invalid format. If so, odd that it imports into the project and simulates ok.
Thanks,
Mtbakerstu

Thanks Stan.
The project originates in Final Cut Pro, so it is easier for me to export out directly from FCP than to make an intermediate file to go into Premiere Pro. Also, going directly makes it more fool proof in terms of potential downstream issues with the MPEG encode.
That said, do you have a file format recommendation if I were to export a master file out of FCP, and then import into PP ?
Regarding if I want the M2V to work, do you know what setting might be causing the error... presuming that's the issue. Does it make sense that I would be able to see the video file workin in Encore, but when I try to then "build" it fails?
Thanks again, feedback most appreciated!
Mtbakerstu

Blu-ray Object: "Sept-Nov_2008", Error: "invalid format", Code: "14", Note: "ERROR: This stream does

I am trying to transcode a self contained FCP quicktime movie file and I get the message - Blu-ray Object: "Sept-Nov_2008", Error: "invalid format", Code: "14",
Note: "ERROR: This stream doesn't include Picture timing SEI, Unit Offset = 785835706". I am going to use quicktime pro 7 to import a quicktime movie instead of FCP self contained file into encore. But if anybody has any suggestions, please let me know. I have read about wrong field orders but I am using a custom preset with the field order set to upper (odd) - since I am using a Apple ProRes 422 (proxy) for the FCP sequence.

This thread might be helpful:
http://adobe.hosted.jivesoftware.com/message/3460426
-Ramesh

Error ' MEX2 USD has an invalid format' in FM 'AC_DOCUMENT_DIRECT_INPUT'

Hi Friends,
I see the error 'MEX2 USD has an invalid format' in FM 'AC_DOCUMENT_DIRECT_INPUT'.Do you guys have any idea as to why has this error occured.Please let me know.
Is this a config issue ?

can you check the currency key which your passing ..

Oracleasm lib failed to load with "Invalid module format" error

Hi,
I'm tring to install the oracleasm lib onto our hardened Redhat EL5 server
I've download the oracleasm rpm from this page http://www.oracle.com/technology/software/tech/linux/asmlib/rhel5.html.
We're using Redhat 5 U 2
[root@PG673 modules]# uname -rm
2.6.18-92.el5 x86_64
[root@PG673 modules]#
The package I downloaded is an exact match with our kernel version
[root@PG673 modules]# rpm -qa | grep asm
oracleasm-2.6.18-92.el5-2.0.5-1.el5
oracleasm-support-2.1.3-1.el5
oracleasm-support-2.1.3-1.el5
oracleasm-2.6.18-92.el5-2.0.5-1.el5
oracleasmlib-2.0.4-1.el5
oracleasmlib-2.0.4-1.el5
[root@PG673 modules]#
RPM installation went well, but when we run the /etc/init.d/oracleasm configure command, we hit the following error
[root@PG673 other]# /etc/init.d/oracleasm configure
/etc/init.d/oracleasm: line 207: /usr/sbin/oracleasm: cannot execute binary file
Later we found out that the oracleasm module haven't been loaded, so we try to load it manually, but we hit the "Invalid module format" error.
[root@PG673 modules]# modprobe -l | grep asm
/lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko
[root@PG673 modules]# modprobe oracleasm
FATAL: Error inserting oracleasm (/lib/modules/2.6.18-92.el5/kernel/drivers/addon/oracleasm/oracleasm.ko): Invalid module format
[root@PG673 modules]#
As I know this error could happen if the driver version is not match with the system kernel version.
The problem is we're already using an exact match version of driver with our system, I can't think of what to do next in order to proceed the installation.
Really appreciate if someone could point me a direction.
Thanks
Mike

Hi Mike,
something looks a bit strange for me. On my OEL 5.4 x64 system i have just the following 3 packages:
$ rpm -qa | grep asm
oracleasm-2.6.18-164.el5-2.0.5-1.el5
oracleasm-support-2.1.3-1.el5
oracleasmlib-2.0.4-1.el5 Your packages should be I think the following:
http://oss.oracle.com/projects/oracleasm-support/dist/files/RPMS/rhel5/amd64/2.1.3/oracleasm-support-2.1.3-1.el5.x86_64.rpm
http://otn.oracle.com/software/tech/linux/asmlib/files/RPMS/rhel5/amd64/2.0.4/oracleasmlib-2.0.4-1.el5.x86_64.rpm
http://oss.oracle.com/projects/oracleasm/dist/files/RPMS/rhel5/amd64/2.0.5/2.6.18-92.el5/oracleasm-2.6.18-92.el5-2.0.5-1.el5.x86_64.rpm
Uninstall all asm packages and retry with just those three.
Good luck!
Cheers,
David
OCP 9i / 10g
http://www.oratoolkit.ch/knowledge/howto/installation/otn.php

Getting Invalid URL error while creating the app even though it's returning valid content from browser.

Hi ,
i am trying add RSS section with URL http://api.foxnews.com/proxy/content/v2?sort=date desc&omitHeader=true&api_key=cc23011f-3ace-40a4-bb63-bfa654af5bc8&format=full-content-rss.xml&rows=20&q=content_type:article AND image_url:*
AND section_path:fnc/entertainment , and it's giving invalid URL error. like @ Invalid Url, use http or https://[domain]. Please help what's going wrong with this URL content.

I've recently deployed an application in Websphere and HTTPServer and have Oracle on the DB back-end. Tim, apparently your login problem happens inside the Websphere. You will have a better chance to ask this question in IBM's forums.

ORA-01722: invalid number error with Bulk collect

Hi ,
I have been using the script to delete old seasonal data from my application DB tables. The stored procedure has been created successfully but when i try to run the proc it has been throwing 'ORA-01722: invalid number' exception at line 'FETCH C1_CUR BULK COLLECT INTO C1_TYPE_VAR LIMIT v_bulklimit;'.
Could you please help me here?
Below is the stored proc:
CREATE OR REPLACE PROCEDURE clean_old_season_data(P_SEASON VARCHAR2) AS
CURSOR C1_CUR IS SELECT ROWID RID,pro.* FROM PROPS pro where pro.ITEMPK IN
(SELECT sve.pk FROM SAVEDVALUEENTRY sve WHERE sve.p_parent IN
(SELECT s.pk FROM SAVEDVALUES s WHERE s.P_MODIFIEDITEM IN
(SELECT a.PK
FROM products a
WHERE a.p_season IN (select s.pk from Seasons s where s.P_code=P_SEASON)
) ) ) and rownum<5;
CURSOR C2_DEL IS SELECT RID FROM PROPS_HISTORY;
TYPE C1_TYPE IS TABLE OF C1_CUR%ROWTYPE;
C1_TYPE_VAR C1_TYPE;
TYPE C2_TYPE IS TABLE OF UROWID;
C2_TYPE_VAR C2_TYPE;
ex_dml_errors EXCEPTION;
PRAGMA EXCEPTION_INIT(ex_dml_errors, -24381);
l_error_count NUMBER;
err_num NUMBER;
err_msg VARCHAR2 (300);
COMMIT_VARIABLE PLS_INTEGER:=0;
v_bulklimit NUMBER:=2;
BEGIN
/*------------------ Data Selection and INSERTION IN HISTORY TABLE ---------------------------------------*/
OPEN C1_CUR;
LOOP
DBMS_OUTPUT.put_line('Cursor opend now in loop');
FETCH C1_CUR BULK COLLECT INTO C1_TYPE_VAR LIMIT v_bulklimit;//ERROR OCCURS HERE
DBMS_OUTPUT.put_line('Cursor count is'|| C1_TYPE_VAR.COUNT);
FORALL I IN 1..C1_TYPE_VAR.COUNT SAVE EXCEPTIONS
INSERT INTO PROPS_HISTORY VALUES C1_TYPE_VAR(I);
COMMIT_VARIABLE := COMMIT_VARIABLE + v_bulklimit;
DBMS_OUTPUT.put_line('Commit variable'|| COMMIT_VARIABLE.COUNT);
IF COMMIT_VARIABLE = v_bulklimit THEN
COMMIT;
COMMIT_VARIABLE := 0;
END IF;
EXIT WHEN C1_CUR%NOTFOUND;
END LOOP;
DBMS_OUTPUT.put_line('Cursor closed now in loop and data inserted in history table');
CLOSE C1_CUR;
/*------------------ Data Selection and DELETION IN Live TABLE ---------------------------------------*/
COMMIT_VARIABLE := 0;
OPEN C2_DEL;
LOOP
FETCH C2_DEL BULK COLLECT INTO C2_TYPE_VAR LIMIT 2;
FORALL I IN 1..C2_TYPE_VAR.COUNT SAVE EXCEPTIONS
DELETE FROM PROPS WHERE ROWID = C2_TYPE_VAR(I);
COMMIT_VARIABLE := COMMIT_VARIABLE + 2;
IF COMMIT_VARIABLE = 2 THEN
COMMIT;
COMMIT_VARIABLE := 0;
END IF;
EXIT WHEN C2_DEL%NOTFOUND;
END LOOP;
CLOSE C2_DEL;
END;

Although there are many things which should not have been done in the posted code, I could not find any reason why the Invalid number error should occur at the Fetch clause.
I would suggest you to Insert into Table by providing the Order of Columns i.e. Insert into table (col1, ... colN) values (coll(i).col1...col(i).colN);
I tested below code and it did not give any errors.
drop table test_table;
create table test_Table
rid   varchar2(100),
emp_id number(5),
fname   varchar2(20),
lname   varchar2(50)
set serveroutput on;
declare
cursor c_cur is
      select rowid rid, e.*
        from employees e
       where rownum < 10;
type typ_cur is table of c_cur%rowtype;
typ typ_cur;
l_bulk_limit    number := 5;
begin
open c_cur;
loop
    fetch c_cur bulk collect into typ limit l_bulk_limit;
    dbms_output.put_line('Collection Count :: ' || typ.count);
    forall i in 1..typ.count --typ.first..typ.last
      insert into test_Table (rid, emp_id, fname, lname) values (typ(i).rid,typ(i).employee_id,typ(i).first_name,typ(i).last_name);
    dbms_output.put_line('Processed ' || l_bulk_limit || ' records.');
    exit when c_cur%notfound;
end loop;
commit;
end;
select * from test_table;PS:- 1. When you are processing only 4 Records, then why are you breaking them in 2 Loops?
2. Why Commit every time you are processing a DML? Why not maintain an Error Flag and Rollback the Transaction as soon as error is encountered?
3. Use "{code}" (Exclude Double Quotes) to format the code. I am not sure if works.
Regards,
P.

7000 : null : java.sql.SQLException: ODI-40400: Invalid format description

Hello all,
I am getting this following error , when trying to load from files to Oracle (used this link as reference : http://john-goodwin.blogspot.com/2009/06/odi-series-processing-all-files-in.html)
ODI 11g 11.1.1.6
Database
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE     11.2.0.2.0     Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
any help would be greatly appreciated
7000 : null : java.sql.SQLException: ODI-40400: Invalid format description
java.sql.SQLException: ODI-40400: Invalid format description
     at com.sunopsis.jdbc.driver.file.impl.metadata.MetaDataExtractor.buildTableDescFromRequestSQLExceptionOnly(MetaDataExtractor.java:479)
     at com.sunopsis.jdbc.driver.file.FilePreparedStatement.buildGenericRow(FilePreparedStatement.java:75)
     at com.sunopsis.jdbc.driver.file.FilePreparedStatement.<init>(FilePreparedStatement.java:57)
     at com.sunopsis.jdbc.driver.file.FileConnection.prepareStatement(FileConnection.java:299)
     at sun.reflect.GeneratedMethodAccessor67.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
     at $Proxy2.prepareStatement(Unknown Source)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.doInitializeStatement(SQLCommand.java:82)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.getStatement(SQLCommand.java:117)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.getBatchCommand(SQLCommand.java:329)
     at oracle.odi.runtime.agent.execution.sql.SQLCommand.processRecord(SQLCommand.java:137)
     at oracle.odi.runtime.agent.execution.cmd.TextCommand.processRecord(TextCommand.java:1)
     at oracle.odi.runtime.agent.execution.DataMovementTaskExecutionHandler.handleTask(DataMovementTaskExecutionHandler.java:86)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:561)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:464)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:83)
     at java.lang.Thread.run(Thread.java:662)Question2:
I am calling
OdiStartScen -SCEN_NAME=ALL_FILES -SCEN_VERSION=001 "-ACTIVITIES.CURRFILENAME=#LOADFILE"
in ODI procedure and when I execute I am getting this following error two
OdiStartScen -SCEN_NAME=ALL_FILES -SCEN_VERSION=001 "-ACTIVITIES.CURRFILENAME=#LOADFILE"
Exception getTargetTable("METADATA_DESC") : ODI-15081: There is no Target TableBoth these errors are happening the same procedure with two commands

Hello,
I am getting the same error too. I am just trying to load simple (13 columns all number) txt to oracle table. My interface defination doesn't contain any transformation, filter or join.
7000 : null : java.sql.SQLException: ODI-40400: Invalid format description
java.sql.SQLException: ODI-40400: Invalid format description
at com.sunopsis.jdbc.driver.file.impl.metadata.MetaDataExtractor.buildTableDescFromRequestSQLExceptionOnly(MetaDataExtractor.java:479)
at com.sunopsis.jdbc.driver.file.FilePreparedStatement.<init>(FilePreparedStatement.java:62)
at com.sunopsis.jdbc.driver.file.FileConnection.prepareStatement(FileConnection.java:299)
at sun.reflect.GeneratedMethodAccessor66.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.odi.core.datasource.dwgobject.support.OnConnectOnDisconnectDataSourceAdapter$OnDisconnectCommandExecutionHandler.invoke(OnConnectOnDisconnectDataSourceAdapter.java:200)
Source Code:
select
CITY_ID
C1_CITY_ID,
DISTRICT_ID
C2_DISTRICT_ID,
TOWNSHIP_ID
C3_TOWNSHIP_ID,
VILLAGE_ID
C4_VILLAGE_ID,
QUARTER_ID
C5_QUARTER_ID,
STREET_ID
C6_STREET_ID,
BUILDING_ID
C7_BUILDING_ID,
INDEPENDENTSECTION_ID
C8_INDEPENDENTSECTION_ID,
MATCH_LEVEL
C9_MATCH_LEVEL,
SERIAL_NUM_SEQ
C10_SERIAL_NUM_SEQ,
POLICY_NUM
C11_POLICY_NUM,
RENEWAL_NUM
C12_RENEWAL_NUM,
ADDRESS_NUM
C13_ADDRESS_NUM
from
TABLE
/*$$SNPS_START_KEYSNP$CRDWG_TABLESNP$CRTABLE_NAME=ADDRESS_HINT_FLSNP$CRLOAD_FILE=C:/temi/adress_hints.txtSNP$CRFILE_FORMAT=DSNP$CRFILE_SEP_FIELD=0x0009SNP$CRFILE_SEP_LINE=0x000D0x000ASNP$CRFILE_FIRST_ROW=1SNP$CRFILE_ENC_FIELD=SNP$CRFILE_DEC_SEP=SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=CITY_IDSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=1SNP$CRLINE_OFFSET=1SNP$CRLENGTH=3SNP$CRSCALE=0SNP$CRPRECISION=3SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=DISTRICT_IDSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=2SNP$CRLINE_OFFSET=4SNP$CRLENGTH=5SNP$CRSCALE=0SNP$CRPRECISION=5SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=TOWNSHIP_IDSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=3SNP$CRLINE_OFFSET=9SNP$CRLENGTH=5SNP$CRSCALE=0SNP$CRPRECISION=5SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=VILLAGE_IDSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=4SNP$CRLINE_OFFSET=14SNP$CRLENGTH=10SNP$CRSCALE=0SNP$CRPRECISION=10SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=QUARTER_IDSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=5SNP$CRLINE_OFFSET=24SNP$CRLENGTH=10SNP$CRSCALE=0SNP$CRPRECISION=10SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=STREET_IDSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=6SNP$CRLINE_OFFSET=34SNP$CRLENGTH=10SNP$CRSCALE=0SNP$CRPRECISION=10SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=BUILDING_IDSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=7SNP$CRLINE_OFFSET=44SNP$CRLENGTH=15SNP$CRSCALE=0SNP$CRPRECISION=15SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=INDEPENDENTSECTION_IDSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=8SNP$CRLINE_OFFSET=59SNP$CRLENGTH=15SNP$CRSCALE=0SNP$CRPRECISION=15SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=MATCH_LEVELSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=9SNP$CRLINE_OFFSET=74SNP$CRLENGTH=2SNP$CRSCALE=0SNP$CRPRECISION=2SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=SERIAL_NUM_SEQSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=10SNP$CRLINE_OFFSET=76SNP$CRLENGTH=10SNP$CRSCALE=0SNP$CRPRECISION=10SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=POLICY_NUMSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=11SNP$CRLINE_OFFSET=86SNP$CRLENGTH=10SNP$CRSCALE=0SNP$CRPRECISION=10SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=RENEWAL_NUMSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=12SNP$CRLINE_OFFSET=96SNP$CRLENGTH=2SNP$CRSCALE=0SNP$CRPRECISION=2SNP$CRSNP$CRDWG_COLSNP$CRCOL_NAME=ADDRESS_NUMSNP$CRTYPE_NAME=NUMERICSNP$CRORDER=13SNP$CRLINE_OFFSET=98SNP$CRLENGTH=20SNP$CRSCALE=0SNP$CRPRECISION=20SNP$CR$$SNPS_END_KEY*/
Target Code:
insert into DASK_DWH.C$_0ADDRESS_HINT
C1_CITY_ID,
C2_DISTRICT_ID,
C3_TOWNSHIP_ID,
C4_VILLAGE_ID,
C5_QUARTER_ID,
C6_STREET_ID,
C7_BUILDING_ID,
C8_INDEPENDENTSECTION_ID,
C9_MATCH_LEVEL,
C10_SERIAL_NUM_SEQ,
C11_POLICY_NUM,
C12_RENEWAL_NUM,
C13_ADDRESS_NUM
values
:C1_CITY_ID,
:C2_DISTRICT_ID,
:C3_TOWNSHIP_ID,
:C4_VILLAGE_ID,
:C5_QUARTER_ID,
:C6_STREET_ID,
:C7_BUILDING_ID,
:C8_INDEPENDENTSECTION_ID,
:C9_MATCH_LEVEL,
:C10_SERIAL_NUM_SEQ,
:C11_POLICY_NUM,
:C12_RENEWAL_NUM,
:C13_ADDRESS_NUM

Invalid format error

Similar Messages

Maybe you are looking for