Invalid group section error when running report containing command.

The error is the following (displayed in Dutch, spent some time changing the language settings, but still CR persists in showing the message in my mother tongue, but the gist of it is: invalid group section or something like that) Process error: Ultimo.Services.ReportService.Core.ReportingException: Error creating export file: LtapList02-01.rpt ---> CrystalDecisions.CrystalReports.Engine.InvalidArgumentException: Deze groepssectie kan niet worden afgedrukt omdat het voorwaardeveld van de sectie niet bestaat of ongeldig is. Maak de sectie op om een ander voorwaardeveld te kiezen. Fout in bestand LtapList02-01 {DEE4EF1C-A138-4AE9-8C64-EF8389263782}.rpt: Ongeldige groepsvoorwaarde. ---> System.Runtime.InteropServices.COMException: Deze groepssectie kan niet worden afgedrukt omdat het voorwaardeveld van de sectie niet bestaat of ongeldig is. Maak de sectie op om een ander voorwaardeveld te kiezen. Fout in bestand LtapList02-01 {DEE4EF1C-A138-4AE9-8C64-EF8389263782}.rpt: Ongeldige groepsvoorwaarde. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) --- End of inner exception stack trace --- at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Export(ExportOptions options) etc. The command is phrased thus: select * from {?DatabaseSchemaPrefix}applfn_LtapStructure(). The error is somehow associated with the parameter used in this command. If I remove it and replace it by the value used when running the report, the report runs successfully. Also, strangely, when I define a default value for the parameter in the command and programmatically add a value for it by the method call parameterFieldDefinition.CurrentValues.AddValue(), also the report will run flawlessly. Without the default value it will fail. But when I want to run the command without a value for the parameter (parameterFieldDefinition.CurrentValues.AddValue("")), so for it to be empty, while a default value is defined for it too, also, running the report will result in an error. My question is: has anyone ever seen this type of thing happening? And is there a solution?

Hi
Is it a Date Parameter., ! if so, look for format it is taking. because u said report runs well when default value is assigned. Hope, most probably the problem will be related to data format.
and
try to provide details regarding CR version and all., will be helpful to others to help you.

Similar Messages

Intermitten Errors when running reports in Crystal Report Viewer

Hi All,
We get intermittent errors when running the same crystal report over and over again. Most of the time, it would run perfectly fine. Once in a while we would see the error message below displayed...
Failed to open the connection. Failed to open the connection. C:\DOCUME1\USBOAD1\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt
CrystalReportViewer - CrystalReportViewer1
Error: Object reference not set to an instance of an object.
We don't know how to reproduce this error. We tried looking into the BusinessObjects log files and the error is trapped inside C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\Logging\crystalras_2009420_3626_2716_ras.log with the message below:
ErrorLog 2009 4 21 11:28:28.598 2716 10272 (\servers\ras\dtsagent\reporthandler.cpp:11592): CReportHandler::buildReportViewerError: CSResultException thrown. ErrorSrc:"CRPE" FileName:"\servers\ras\dtsagent\reporthandler.cpp" LineNum:11588 ErrorCode:756 ErrorMsg:"Failed to open the connection.
Failed to open the connection.
C:\DOCUME1\USBOAD1.000\LOCALS~1\Temp\{432E6564-2811-4364-84FB-5E315F8DCBCA}.rpt" DetailedErrorMsg:"
Question:
Does anyone know why this is happening? Any help will be much appreciated. It happens maybe 1 out of 10 times the report runs.
Versions:
CR XI R2 SP1
.Net Framework 2.0
Windows 2000 SP4

Hi,
Give it a try by using the close and dispose method for report object and also use the GC.collect.
Hope it helps!!
Amit

Proxy error when running reports in Infoview

We are running XI 3.1 sp4 and are getting a Proxy error on some reports when running in PDF mode. Any ideas?
Here's the error:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /AnalyticalReporting/ViewAsPDF/Disposition Analysis Report.pdf.
Reason: Error reading from remote server
Apache Server at preprod.nalts.com Port 443

Hi Sylvia,
It seems that the reverse proxy you are using: Apache could have problems with the sessions of the users. I have seen the same behaviour with other Load Balancers. If you have different WAS in the backend, make sure they stay with the same WAS (session affinity).
Regards,
Julian

URGENT!!!!- INTEL MAC "INVALID SIBLING DISK" error when run disk utility

I am very upset, I ran my verify disk permissions, everything fine, repair disk permissions, everything fine, do t periodically just to mae sure all my stuff is in order,,,, then I decided to run te VERIFY DISK, because do not do it as much and want to mae sure my macbook pro is running fine, and I get:
Verifying volume “minimal minimal”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Invalid sibling link
The volume minimal minimal needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair
!!!!!!!!!!!!!!! ***?!!!!!!!!!!!!!!!!! there is no way of repairing the disk, and when I search for possible solutons it says I need to run it from the original osx installer disk, and even when it does not necessarily repir this error. besides the fact that the original cd is in atlanta and I am currently in barcelona, some say that I would need to reformat my drive and either way this might not solve the problem. I HAVE WAY TOO MUCH IMPORTANT INFORMATION on my macbook pro to reformat, and i do not have the money to buy an external hardrive, I A VERY UPSET, A BRAND NEW COMPUTER, LESS THAN TWO MONTHS OLD, AND ALREADY I HAVE THESE KIND OF PROBLEMS WITH IT, WHERE IS MY SUPPORT?! please tell me, what do i do? I expect a decent, viable slution to the problem. I need my computer ad the information in it, I work from it and also use it to produce music. why would I have this kind of problem, when I search for answers, everything relates to external hardrives, ..... this is my internal hard drive that I am talking about--- WHAT DO I DO?!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The available Apple centers in Spain are:
ADEMAC
C Castelló, 109
28006 Madrid
Tel 91 562 11 00
BANANA COMPUTER
C Leon and Castillo, 88
The 35004 Palms of Great Canary
Tel: 928 24 28 28
Fax: 928 24 82 31
BANANA COMPUTER
General boulevard Franco, 141
38001. - Santa Cruz de Tenerife
Tlf.: 922882126
Fax.: 922206782
BENOTAC
C Doctor Castelo, 35
28009 Madrid
Tel 91 308 43 63
BENOTAC
C Babel Nº1, the Premises
29006 Malaga
Tel: 952 04 09 55
Fax: 952 04 13 58
BILBOMICRO
Stolen c of Amezaga, nº 7 low
48008 Bilbao (Biscay)
Tel 94 423 02 13
BILBOMICRO
C Abendaño, 52
01008 Vitoria
Tel 945 28 41 33
BUS Solutions
C Cabrales, 100
33201 Gijón - Asturias
Tel: 985 35 90 85
CTA Serveis
C Consell de Cent, 382
08009 Barcelona
Tel 93 24 40 350
GOLDENMAC
C Bolt, 48
29007 Malaga
Tel 952 42 97 12
GOLDENMAC
Avda. White Carrero, 2
41011 Seville
Tel 95 427 12 13
K-TUIN
C Luis You live 8
50006 Zaragoza
Tel 976 56 72 27
K-TUIN
C Hernandez Lazaro 14
46015 Valencia
Tel 96 385 36 74
K-TUIN
C Muntaner 537 - 541
08022 Barcelona
Tel 93 418 02 03
K-TUIN
C Orense, 52
28020 Madrid
Tel 91 55 56 798
K-TUIN
C Aureliano Valle, 4
48010 Bilbao
Tel 94 410 07 77
Microgestio, LIMITED LIABILITY COMPANY.
C Valencia, 87-89
08029 Barcelona
Tel 93 454 63 63
Rossellimac.
C Painter Lopez Mosque, 12
18002 Granada
Tel 95 829 13 24
SICOS
Pza of Good Shepherd 6
20005 San Sebastián (Guipuzcoa)
Tel 94 344 12 79
Valles Tecnologic, S.A.
Plza. Of the Unio, 3 the Premises 1º
08190 Sant Cugat of Valleys (Barcelona)
Tel 93 590 80 60
Perhaps, since you are under warranty, they may have a boot disk to attempt to run disk utility and see if the problem can be repaired before resorting to reformatting. Disk error may occur because of a number of issues (installed software, crashes, shutdowns, physical movement of the drive while disks spinning, etc.)
In addition you may want to boot in the single user mode to access the FSCK command as follows: The following is from the Apple support site
Mac OS X: How to Start up in Single-User or Verbose Mode
You may use a key combination when starting up the computer to enter single-user mode or verbose mode, either of which can be used for troubleshooting and in software development. This document applies to Mac OS X and Mac OS X Server versions 10.0 and later.
Steps to Enter Single-User or Verbose Mode
1. Shut down the computer if it is on.
2. Press the power button to start the computer.
3. Immediately press and hold the Command (Apple) key and one of the following:
the "s" key for single-user mode.
the "v" key for verbose mode.
4. To exit single-user mode type: reboot
5. Press Return.
You have successfully entered single-user or verbose mode when you see white text appear on the screen.
Then you may try to repair as follows using the FSCK
fsck is a command-line utility that may be able to verify and repair a disk. If you can successfully start up in Safe Mode or use Disk Utility while started up from a disc, you don't need to use fsck. However, here are some situations in which fsck may be necessary.
Your Mac OS X disc isn't available.
Your optical drive isn't available.
You can't start with a Safe Boot.
Tip: If you use a Mac OS X Extended (Journaled) formatted volume, such as with Mac OS X 10.3 or later, you probably won't need to use fsck. If you do use it for any reason, please be aware that benign error messages can appear.
If you're not sure how your volume is formatted and you can't start up from your Mac OS X volume to find out, type the following command in a command-line interface and then press Return: diskutil info /
If you see "File System: Journaled HFS+" returned, you have a Journaled volume.
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
Start up your computer in single-user mode to reach the command line.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
At the command-line prompt, type /sbin/fsck -fy
Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (nameofvolume) appears to be OK
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
*** FILE SYSTEM WAS MODIFIED ***
Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
Your computer should start up normally and allow you to log in.
About live verification in Mac OS X 10.4.3 or later
In Mac OS X 10.4.3 or later, you can verify your Mac OS X volume while started from it. This is known as live verification, and can be used in three different ways.
Option 1: Verify your disk using Disk Utility while started from the startup disk. To find out how to do this, see this article. Please note that live verification does not involve any disk repair, so if verification finds something that should be repaired, start up from your Mac OS X Install disc and use Disk Utility as described above in "Try Disk Utility."
Option 2 (advanced): Use the command line and the command-line utility, diskutil.
Start up your computer and log in as an administrator.
Open Terminal (/Applications/Utilities).
At the prompt, type the following command and then press Return:
diskutil verify /
Note: Don't use this method to check non-startup volumes.
You should see messages such as the following during the disk check:
Could not unmount disk for verification, attempting live verify
Started verify/repair on volume disk0s3 Macintosh HD
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
The volume Macintosh HD appears to be OK.
Mounting Disk
Verify/repair finished on volume disk0s3 Macintosh HD
Option 3 (advanced): Use the command line and the fsck_hfs -l command.
Start up your computer and log in as an administrator.
Open Terminal (/Applications/Utilities).
At the prompt, type the following command and then press Return to determine your filesytem ID:
df -hl
Look for some lines of text that look like this:
Filesystem Size Used Avail Capacity Mounted on
/dev/disk0s3 37G 20G 17G 55% /
/dev/disk0s5 37G 37G 641M 98% /Volumes/Storage
Make a note of the first "disk" name that appears after /dev/, such as "disk0s3." This is your filesystem ID for your startup volume.
At the prompt, type the following command and then press Return:
df -hl
Then type the following command, where "disk0s3" is your filesystem ID you noted in step 4, then press Return:
sudo fsck_hfs -l /dev/disk0s3
When prompted, enter your admin password, then press Return to begin the verification.
You should see messages like these during the disk check:
** /dev/rdisk0s3 (NO WRITE)
** Root file system
** Checking HFS Plus volume.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking multi-linked files.
** Checking Catalog hierarchy.
** Checking Extended Attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume Macintosh HD appears to be OK.
Additional Information
If you're interested in UNIX-style command-line syntax, here's a look at how a couple of flags used in our instruction can influence fsck:
The -y flag: Tells fsck that you want to answer "yes" to all questions about fixing, repairing, or salvaging information. This is the optimal approach, as answering "no" to any question causes fsck to stop. You cannot determine that all necessary repairs have been made until fsck completes and gives its final report.
The -f flag: Forces fsck to check "clean" filesystems when preening.
Macbook Pro 17" 7200 HD 1GB Powerbook G4 (15 inch FW 800) Mac OS X (10.4.6)
Macbook Pro 17" 7200 HD 1GB Powerbook G4 (15 inch FW 800) Mac OS X (10.4.6)
Macbook Pro 17" 7200 HD 1GB Powerbook G4 (15 inch FW 800) Mac OS X (10.4.6)

Error when running report in CMC and Infoview_2

I made this same thread in BOBJ Administration section but maybe it belongs here..........
Hi all,
i have this following problem:
- when i try to run report in cmc it fails and i get this error message: Error in File ~tmp1a745af945b59b0.rpt: Failed to load database information
- when i try to run the report in infoview the error message looks like this: Error in File test_4: Failed to load database information.
Where can be the possible problem ?
Thanks for any suggestions.

Hi,
this forum is about the Integration Kit with SAP. seems to belong to the BusinessObjects administration area
Ingo

Internal server error when running report from form

i am getting the following error when I run a report from a form using 9i:
java.lang.NumberFormatException: mgb_5
this is my code:
DECLARE
repid REPORT_OBJECT;
vc_rep VARCHAR2(20);
vc_URL VARCHAR2(100);
vc_rep_job VARCHAR2(10);
BEGIN
repid := find_report_object('rep2');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_FILENAME,'C:\uni\mdt\cw1\rep2.rdf');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_EXECUTION_MODE, RUNTIME);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_DESFORMAT, 'htmlcss');
SET_REPORT_OBJECT_PROPERTY(repid, REPORT_SERVER,'rep_mgb');
vc_rep := RUN_REPORT_OBJECT(repid);
vc_rep_job := substr(vc_rep,instr(vc_rep,'_')+1);
vc_URL := '/reports/rwservlet/getjobid' ||vc_rep_job||'?server='||get_report_object_property (repid,report_server);
web.show_document(vc_url, '_blank');
END;

Michael,
print out "vc_rep_job" to a message or alert to see if this contains a valid number. If this shows as a valid number try to manually type the access URL into a browser URL field. If this shows then you have a hidden character within your URL.
The PLSQL code looks okay.
Frank

Invalid aruments in decode when running report

Hi,
I have a decode statement in my sql.
I can close the data model and compile the program - no errors
However, when I run the report, I get invalid number of arguments for the decode.
I have copied the same code from a working report with the same unfortunate result.
Help !

SELECT v.vendor_name C_VENDOR_NAME,
       v.segment1 C_VENDOR_NUMBER,
       decode(upper(:P_SORT_OPTION),'VENDOR NAME',decode(:C_VENDOR_NAME_SELECT,'%',upper(v.vendor_name),v.vendor_name),i.invoice_type_lookup_code) C_PRIMARY_BRK,
       decode(upper(:P_SORT_OPTION),'VENDOR NAME',decode(:C_VENDOR_NAME_SELECT,'%', decode(:SORT_BY_ALTERNATE, 'Y', upper(v.vendor_name_alt), upper(v.vendor_name)), decode(:SORT_BY_ALTERNATE, 'Y', v.vendor_name_alt, v.vendor_name)),i.invoice_type_lookup_code) C_PRIMARY_BRK_REAL,
       v.vendor_name C_SHORT_VENDOR_NAME,
       v.vendor_id C_VENDOR_ID,
       i.vendor_site_id C_CONTACT_SITE_ID,
       vs.vendor_site_code C_VENDOR_SITE_CODE,
       decode(:SORT_BY_ALTERNATE, 'Y', vs.vendor_site_code_alt, vs.vendor_site_code) C_VENDOR_SITE_CODE_BRK,
       nvl(vs.state,' ') C_VENDOR_STATE,
       nvl(substr(vs.city,1,15),' ') C_VENDOR_CITY,
       ps.payment_num C_REFERENCE_NUMBER,
       i.vendor_site_id C_ADDRESS_ID,
       nvl(substr(i.invoice_type_lookup_code,1,20), ' ') C_INVOICE_TYPE,
       i.invoice_id C_PAYMENT_SCHED_ID,
       nvl(to_char(ps.due_date,'DD-MON-RR'),' ') C_DUE_DATE,
       /* Bug: 1549982 */
       /* Bug 2083419 For foreign currencies, show amounts in functional currency */
       decode(i.invoice_currency_code,:C_BASE_CURRENCY_CODE,decode(:C_BASE_MIN_ACCT_UNIT,0,round(((nvl(ps.amount_remaining, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1)),:C_BASE_PRECISION),round(((nvl(ps.amount_remaining, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1))/:C_BASE_MIN_ACCT_UNIT) *:C_BASE_MIN_ACCT_UNIT), decode(i.exchange_rate,NULL,0, decode(:C_BASE_MIN_ACCT_UNIT, 0,round(((nvl(ps.amount_remaining, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1)),:C_BASE_PRECISION), round(((nvl(ps.amount_remaining, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1))/:C_BASE_MIN_ACCT_UNIT) * :C_BASE_MIN_ACCT_UNIT))) C_AMT_DUE_REMAINING,
       decode(i.invoice_currency_code,:C_BASE_CURRENCY_CODE, decode(:C_BASE_MIN_ACCT_UNIT,0,round(((nvl(ps.gross_amount, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1)),:C_BASE_PRECISION), round(((nvl(ps.gross_amount, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1))/:C_BASE_MIN_ACCT_UNIT) * :C_BASE_MIN_ACCT_UNIT), decode(i.exchange_rate,NULL,0, decode(:C_BASE_MIN_ACCT_UNIT, 0,round(((nvl(ps.gross_amount, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1)),:C_BASE_PRECISION), round(((nvl(ps.gross_amount, 0)/(nvl(i.payment_cross_rate,1))) * nvl(i.exchange_rate,1))/:C_BASE_MIN_ACCT_UNIT) * :C_BASE_MIN_ACCT_UNIT))) C_AMT_DUE_ORIGINAL,
       i.accts_pay_code_combination_id C_VENDOR_TRX_ID,
       i.invoice_num C_INVOICE_NUMBER,
       i.invoice_num C_INVOICE_NUM_SHORT,
       nvl(hr.org_information4,i.org_id) ORGNAME,
       to_char(i.invoice_date,'DD-MON-RR') C_INVOICE_DATE,
       ceil(to_date(to_char(SYSDATE,'DD-MON-RR')) - ps.due_date) C_DAYS_PAST_DUE,
       decode(i.invoice_currency_code, :C_BASE_CURRENCY_CODE, ' ', decode(i.exchange_rate, NULL,'*', ' ')) C_DATA_CONVERTED,
       nvl(i.exchange_rate, 1) C_EXCHANGE_RATE,
       decode(:C_VENDOR_NAME_SELECT,'%',decode(:SORT_BY_ALTERNATE, 'Y', upper(v.vendor_name_alt), upper(v.vendor_name)),decode(:SORT_BY_ALTERNATE, 'Y', v.vendor_name_alt, v.vendor_name)) C_VENDOR_NAME_BRK,
       decode(:p_seq_numbers, 'N', i.voucher_num, i.doc_sequence_value) VOUCHER_NUMBER
FROM hr_organization_information                     hr,
       ap_payment_schedules_all                         ps,
       po_vendor_sites_all                          vs,
       po_vendors                               v,
       ap_invoices_all                               i
WHERE i.payment_status_flag in ('N','P')
   AND i.invoice_type_lookup_code like :C_INVOICE_TYPE_SELECT
   AND i.cancelled_date IS NULL
   AND v.vendor_id                              = i.vendor_id
   AND vs.vendor_site_id                         = i.vendor_site_id
   AND ps.invoice_id                              = i.invoice_id
   AND ((to_date(to_char(SYSDATE,'DD-MON-RR')) - ps.due_date) between :C_MINDAYS and :C_MAXDAYS)
   AND hr.organization_id                         = i.org_id
   AND hr.org_information_context                     = 'Operating Unit Information'
   AND (nvl(ps.amount_remaining, 0) * nvl(i.exchange_rate,1))      != 0
   &P_VENDOR_PREDICATE
   &P_AMOUNT_PREDICATE
   &P_ORDER_BYTry and comment out one of the 8 original decodes to see which one or ones is the offending statement and then default that column value to something, like:
       ceil(to_date(to_char(SYSDATE,'DD-MON-RR')) - ps.due_date) C_DAYS_PAST_DUE,
       --decode(i.invoice_currency_code, :C_BASE_CURRENCY_CODE, ' ', decode(i.exchange_rate, NULL,'*', ' ')) C_DATA_CONVERTED,
       '*' C_DATA_CONVERTED
       nvl(i.exchange_rate, 1) C_EXCHANGE_RATE,
...Also trying supplying more details on the "4 parameters that work". What does that mean to people who do not have your data. Does the 5th one work when null? Does the 5th one only produce an error when you supply a value. What are some example values of the other 4 parameters?

Error when running reports: "File Server needs to be re-initialized"

Hi.
This error "File Server needs to be re-initialized" appears when our users try to run reports on 11.5.10. EBS.
There is also a message box that appears and reads:
"A error occurred while attempting to establish a conection to Application File Server. There may be a network configuration problem, or the TNS listener may not be running."
This is a problem in our test environment. We recently ran autoconfig on the test side.
I have checked Metalink and also wider google search.
Perhaps we have an issue with the tnsnames files? Well, I verified this and the tnsnames in production and test, and they are the same.
Perhaps a listener.ora file issue?
"The issue is caused by the variables APPLFSTT and APPLFSWD is not being set properly in the <8.0.6_ORACLE_HOME> listener.ora file. " (Note 263654.1)
I am trying to verify the meaning of the following (in listener):
( SID_DESC = ( SID_NAME = FNDFS )
( ORACLE_HOME = /oracli2/oracle/testora/8.0.6 )
,APPLFSTT=
TEST_BALANCE;TEST;PROD_806_BALANCE;TEST_FO;TEST_806_BALANCE;PROD_FO,APPLFSWD=/or
acli2/oracle/testappl/admin;/oracli2/oracle/testcomn/temp;/oracli2/oracle/testco
mn/html/oam/nonUix/launchMode/restricted' )
In the APPLFSTT entry, should there be any mention of "PROD" ? Shouldnt this all be changed to TEST?
Also, comparing this to the PROD listener, the order of APPLFSTT is different:
TEST: APPLFSTT=
TEST_BALANCE;TEST;PROD_806_BALANCE;TEST_FO;TEST_806_BALANCE
PROD:APPLFSTT=
PROD_806_BALANCE;PROD;PROD_BALANCE;PROD_FO,
I have made a copy of our listener in TEst, so I can edit the existing one. Trouble is, not sure if I even should try to edit it!
Any suggestions, much appreciated.
Oracle 9.2.0. AIX 5.2.
Notes covered in Metalink:
274177.1
303971.1
304568.1
263654.1

Yes thanks for that. Metalink has informed me to do the same, basically.
But I am in the middle of a cloning, so I will finish that then run autoconfig once again.
I already ran Autoconfig on both source and target, so will do again once this process is over.
Cheers.
DA

Error when running reports on the WEB

Hi,
I have been successful in deploying our application on the Web,
using WebDB listener, Developer Server, Report Server and JInitiator 1.1.7.18.
Now the forms on the web runs fine without any problem but
when I run Reports from Forms using RUN_PRODUCT built-in by passing parameters from Forms to Reports it generates this following error: REP-0081-Error During I/O operation and REP-0110: Unable to open file "<<file>>.html" scaba 14.
The strange thing about the REP-0110 is, it refer to a path that is not defined in my registry(FORMS60_OUTPUT,_MAPPING, REPORTS60_PATH,_TMP,_WEBLOC,_WEBLOC_TRANSLATED) and neither my physical directory in the directory mappings which I defined on the web server. (I refer to a the path mindpack4.1 and the REP-0110 refer to mindpack4_1)
Any help appreciated.
Thanks

Hello pals,
i have set the following parameters: TMPDIR and REPORTS60_TMP...
and it seems to be working!!!
i hope that the problem is not somewhere else.
NB. I was having problems with 2 reports only. the others were
working fine.
any comments will be most welcomed.
regards
Yogeeraj

Error when running Report

I've a problem when run the report.
I get the error like below:
Rep-0108:File 'C:\orawin95\report60\rwbdexpq.res' not found.
Are you solve this error before? I already check the file and I found that is missing for the first time then I copy the file from the other machine.but same message still apear.
This only hanppend when the PC is newly install of my application from my installation disk.
Thanks in advance
Eric
null

I had an similar error, because I developed the form/report.. with an updated version of developer but forgot to update the users runtime module; when I installed the patch on the users pc everything went fine;
I tried at first also to copy the missing file, which didn't help at all;
null

Error when running report using SDK

Hi, I am getting following error when I am running a report in boxi r2 sp3 on IIS. Infoview and CMC runs fine but SDK application is not able to connect to CMS. This error does not come all the time. It happens intermittently.
Error in RetrieveReport: Unable to connect to cluster @hisuatcluster to retrieve updated CMS member list. Logon cannot continue.
Anyone has seen this and any way to pin point the cause. We have used -ns and -port switch in the command line of CMS and all servers.
Thanks,

will try that. But we would not be leveraging cluster benefit then. What happens if that particilar CMS in cluster goes down.
Below is the logic of SDK.
1.     Create an EnterpriseSession by calling SessionMgr.Login(the credentials we use to connect on in the web.config file).
2.     Get a reference to the InfoStore with EnterpriseSession.GetService(u201CInfoStoreu201D)
3.     Get a reference to the report as an InfoObject by querying the InfoStore u2013 InfoStore.Query(u201CSELECT * FROM CI_INFOOBJECTS WHERE u2026u201D)
4.     Get a reference to the RASReportFactory u2013 EnterpriseSession.GetService(u201Cu201D, u201CRASReportFactoryu201D)
5.     Open the report using the InfoObject (line 3) and RASReportFactory (line 4) u2013 ReportClientDoc = ReportAppFactory.OpenDocument(InfoObject.ID, 0)
6.     Manipulate the reportu2019s connection information.
7.     Set the vieweru2019s report source with the report (this is commented out in the current tests) u2013 CrystalReportViewer.ReportSource = ReportClientDocument
8.     Close the session u2013 EnterpriseSession.Logoff()

SCCM 2012 Error When Running Reports

I get the following errors when trying to run a report:
Microsoft.Reporting.WinForms.ReportServerException
An error has occurred during report processing. (rsProcessingAborted)
Stack Trace:
   at Microsoft.Reporting.WinForms.ServerReport.ServerUrlRequest(Boolean isAbortable, String url, Stream outputStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.ServerReport.InternalRender(Boolean isAbortable, String format, String deviceInfo, NameValueCollection urlAccessParameters, Stream reportStream, String& mimeType, String& fileNameExtension)
   at Microsoft.Reporting.WinForms.AsyncMainStreamRenderingOperation.RenderServerReport(ServerReport report)
   at Microsoft.Reporting.WinForms.AsyncRenderingOperation.PerformOperation()
   at Microsoft.Reporting.WinForms.ReportViewer.AsyncReportOperationWrapper.PerformOperation()
   at Microsoft.Reporting.WinForms.ProcessingThread.ProcessThreadMain(Object arg)

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Can you access the report outside of the console? I never recommend accessing the reports inside of the console.
http://be.enhansoft.com/post/2013/09/10/Should-Configuration-Manager-SSRS-or-ASP-Reports-be-Accessed-from-the-Browser-or-the-Console.aspx
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Error when run report 10g (10.1.2.0.2) with Paper parameter form

Dear Friends
I just installed Developer suite 10g and Database 10g on my pc (10.1.2.0.2) when I run report in Report builder with paper parameter form (I selected only one system parameter : Destination type) I got the message
Reports Error Page
Fri Apr 07 09:06:01 GMT+07:00 2006
javax.servlet.jsp.JspException: REP-56092: No class defined for destination type Screen
How to solve it? Please give me the instruction or Oracle link that I can get the documents. If someone has the white paper .pdf please give me.
Hope with help
Thanks & Best regards,
Bansak K.
[email protected]

Thanks for the tip.
Correct me if I am wrong but you have set up SLED SP1 connecting to an OS like (RHEL 4/OEL 4,SuSE 9) using VMWare Server. What OS is SLED?
I chose SUSE 10.3 as its free and I want to set up apps server for purely training purposes. Do you know of a free linux OS that is certified to run AS 10g 10.1.2.0.2?
Thanks
Jon

Error when running report in CMC and Infoview

Hi all,
i have this following problem:
- when i try to run report in cmc it fails and i get this error message: Error in File ~tmp1a745af945b59b0.rpt: Failed to load database information
- when i try to run the report in infoview the error message looks like this: Error in File test_4: Failed to load database information.
Where can be the possible problem ?
Thanks for any suggestions.

<b>i dont know if this could help you, but i found something when trying to refresh report in infoview - the full error log:</b>
2009-05-27 08:40:54
com.crystaldecisions.sdk.occa.report.lib.ReportSDKException: Error in File Vykaz_2:
Failed to load database information.---- Error code:-2147215357 Error code name:internal
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKException.throwReportSDKException(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.a(Unknown Source)
     at com.crystaldecisions.sdk.occa.managedreports.ps.internal.f.findGroup(Unknown Source)
     at com.businessobjects.report.web.event.q.a(Unknown Source)
     at com.businessobjects.report.web.event.z.a(Unknown Source)
     at com.businessobjects.report.web.event.bt.broadcast(Unknown Source)
     at com.businessobjects.report.web.event.ak.a(Unknown Source)
     at com.businessobjects.report.web.a.q.if(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.businessobjects.report.web.e.a(Unknown Source)
     at com.businessobjects.report.web.e.if(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerUpdater.a(Unknown Source)
     at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.if(Unknown Source)
     at com.crystaldecisions.report.web.viewer.CrystalReportViewerServlet.doPost(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595):
Edited by: Martin Zluky on Jul 27, 2009 9:35 AM

Getting BEFOREREPORTTRIGGER error when running report on web

Hi,
I have developed a report which uses lexicals in main query. In lexicals I apply filters (if any) which come as parameters from the GUI via a dbase table. When report is run locally using "Run Paper Layout" option it works as desired -- with or without filters.
When report is run via GUI it runs fine when no filters are applied. Problem comes when any of the filter is applied in any one of the cases selected from the GUI.
And I get the following errors.
REP-1419: Please contact the Systems Administrator.
REP-1419: 'beforereport': PL/SQL program aborted.
when I go and check the beforereport trigger it does not show any errors when report is run within report builder.
Any suggestions would be appreciated
Thanks in advance

Problem comes when any of the filter is applied in any one of the cases selected from the GUI.Do you mean that the problems only shows when you run the report in your browser via 9iAS?
Which version are you using?
Can you post the before report trigger?

Invalid group section error when running report containing command.

Similar Messages

Maybe you are looking for