Invalid http response: null
Olá Masters,
Estou com esse erro abaixo, alguém pode me ajudar?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid http response: null</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Este é o meu XML com erro:
<NFe xmlns="http://www.portalfiscal.inf.br/nfe">
<infNFe versao="2.00" Id="NFe52110403485572000104550010000000611621476378">
<ide>
<cUF>52</cUF>
<cNF>62147637</cNF>
<natOp>Venda producao do estabelecimento /</natOp>
<indPag>0</indPag>
<mod>55</mod>
<serie>1</serie>
<nNF>61</nNF>
<dEmi>2011-04-01</dEmi>
<tpNF>1</tpNF>
<cMunFG>5201108</cMunFG>
<tpImp>1</tpImp>
<tpEmis>1</tpEmis>
<cDV>8</cDV>
<tpAmb>2</tpAmb>
<finNFe></finNFe>
<procEmi>0</procEmi>
<verProc>SAP NFE 2.0</verProc>
</ide>
<emit>
<CNPJ>03485572000104</CNPJ>
<xNome>GEOLAB INDUSTRIA FARMACEUTICA S/A MATRIZ</xNome>
<enderEmit>
<xLgr>V PRINCIPAL 1-B</xLgr>
<nro>S/N</nro>
<xBairro>DAIA</xBairro>
<cMun>5201108</cMun>
<xMun>ANAPOLIS</xMun>
<UF>GO</UF>
<CEP>75132085</CEP>
<xPais>Brasil</xPais>
<fone>06240154000</fone>
</enderEmit>
<IE>103233270</IE>
<IM>46305</IM>
<CNAE>1234567</CNAE>
<CRT>3</CRT>
</emit>
<dest>
<CNPJ>00011976000160</CNPJ>
<xNome>DROGARIA MAIS FORMOSA LTDA ME</xNome>
<enderDest>
<xLgr>AV ANHANGUERA</xLgr>
<nro>33</nro>
<xBairro>CENTRO</xBairro>
<cMun>5208707</cMun>
<xMun>GOIANIA</xMun>
<UF>GO</UF>
<xPais>Brasil</xPais>
<fone>6932276622</fone>
</enderDest>
<IE>116476543112</IE>
</dest>
<det nItem="1">
<prod>
<cProd>000000000000500134</cProd>
<cEAN>7899095201347</cEAN>
<xProd>POLTAX D 50MG CX C/ 20COMP DISP</xProd>
<NCM>30049037</NCM>
<CFOP>5101</CFOP>
<uCom>UN</uCom>
<qCom>1.0000</qCom>
<vUnCom>50.0000000000</vUnCom>
<vProd>50.00</vProd>
<cEANTrib></cEANTrib>
<uTrib>UN</uTrib>
<qTrib>1.0000</qTrib>
<vUnTrib>50.0000000000</vUnTrib>
<indTot>1</indTot>
</prod>
<imposto>
<ICMS>
<ICMS00>
<orig>0</orig>
<CST>00</CST>
<modBC>3</modBC>
<vBC>50.00</vBC>
<pICMS>17.00</pICMS>
<vICMS>8.50</vICMS>
</ICMS00>
</ICMS>
<IPI>
<cEnq>999</cEnq>
<IPINT>
<CST>01</CST>
</IPINT>
</IPI>
<PIS>
<PISNT>
<CST>07</CST>
</PISNT>
</PIS>
<COFINS>
<COFINSNT>
<CST>07</CST>
</COFINSNT>
</COFINS>
</imposto>
<infAdProd>+</infAdProd>
</det>
<total>
<ICMSTot>
<vBC>50.00</vBC>
<vICMS>8.50</vICMS>
<vBCST>0.00</vBCST>
<vST>0.00</vST>
<vProd>50.00</vProd>
<vFrete>0.00</vFrete>
<vSeg>0.00</vSeg>
<vDesc>0.00</vDesc>
<vII>0.00</vII>
<vIPI>0.00</vIPI>
<vPIS>0.00</vPIS>
<vCOFINS>0.00</vCOFINS>
<vOutro>0.00</vOutro>
<vNF>50.00</vNF>
</ICMSTot>
</total>
<transp>
<modFrete>1</modFrete>
</transp>
</infNFe>
</NFe>
Edited by: Henrique Pinto on Apr 1, 2011 12:10 PM EDITADO pra remover assinatura e formatar XML
Similar Messages
-
Invalid http response: null - Error in SOAP sync receiver
Hi,
We are getting the following error in synchronous SOAP receiver connection.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null
note: This inteface is working fine without error in the subsequent run.
Anyone please help me out in this...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi Rajendra,
The same issue I am also facing in production system.
In my case the all the requests are failing after an IIS7.5 upgrade of the Application in production.
The strange thing is that except SAP rest all the applications are able to submit requests and getting proper response also.
We are using a https communication and private key certificate authentication in SAP PI.
Does it look like a PI issue or IIS upgrade is causing some issue.
Please suggest.
Thanks,
Ashish -
Hi experts,
I have a IDOC to SOAP scenario where SOAP receiver channel is sending data to web service. In the receiver channel I am getting error as below. Kindly help me to resolve this issue. Thanks.
"Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null"Did you check this?
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
Regards
Pothana -
Message processing failed: Invalid http response: 220
Hi Experts,
I am working on FILE to SOAP scenerio. File is coming in XI properly. But in the SOAP CC its showing this error.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid http response: 220 (Name of the Interanet of the Company) Microsoft ESMTP MAIL Service, Version: 6.0.3790.1830 ready at Thu, 23 Oct 2008 12:02:22 +0530 : java.io.IOException: invalid http response: 220 (Name of the Interanet of the Company) Microsoft ESMTP MAIL Service, Version: 6.0.3790.1830 ready at Thu, 23 Oct 2008 12:02:22 +0530
Any ideas ?
-=SoniyHi Sonia,
Please go throgh the following links for use ofr XML SPY
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7ccd3e4e-0501-0010-95ae-afa58cb46b75
Re: Stand alone testing using XML Spy
WSDL frm Altova xml spy
Invoke Webservices using SAPXI
Testing XI exposed Web-Services
Regards
Sridhar Goli -
Invalid http response: HTTP/1.1 200
Hi gurus!
I have a problem with an asynchronous interface.
We are calling a Webservice which we don't need any response. In sxmb_moni it's OK, but in our RWB we see it as failed, with this entry: invalid http response: HTTP/1.1 200.
I have search in logs, and in defaultTrace_00.0.trc we can see the following entry:
Marked transaction for rollback for meesage 4b4ed19f-bbe6-0062-e100-8000ac1f041d(INBOUND). Reason: java.io.IOException: invalid http response: HTTP/1.1 200
We have captured the HTTP header response, and is:
HTTP/1.1 200
Date: Thu, 14 Jan 2010 10:26:03 CET
Server: Mule/1.2
Connection: close
Expires: Thu, 14 Jan 2010 10:26:03 CET
Content-Type: text/xml
Content-Length: 508
X-MULE_CORRELATION_ID: d595447a-00ee-11df-a6a5-becd407b7daa
X-MULE_CORRELATION_GROUP_SIZE: 3
X-MULE_CORRELATION_SEQUENCE: -1
Could it be problem of the X-MULE_CORRELATION headers? Or Maybe PI needs an HTTP/1.1 200 OK?
Thak you!!!!Hi Ignasi,
I personally donu2019t think you will have much luck getting XI to accept this response since itu2019s not an XI issue. Itu2019s true that the client (XI in this case) is not required to examine or display the reason-phrase, but that statement doesnu2019t negate the requirement on the server to provide it. The client has the option to look at it or not, but the server must still provide it either way.
I didn't notice the http header before, but the server you are connecting to is actually Mule version 1.2. This release dates back to 2005. I ran a quick test and reproduced the issue using Mule 1.2 (hello-http sample). This may not be the same exact issue, but I did observe the same issue with the missing reason-phrase. The issue is fixed in the Mule 1.3 release.
Perhaps they can request a patch for 1.2. This may not be possible since they are working on the Mule 3.0 version now, but I really donu2019t know. Itu2019s literally one line of code. I made one small change and was able to get the hello-http sample working (code is open source):
Class: org.mule.providers.http.transformers.UMOMessageToHttpResponse
From this:
httpMessage.append(status).append(HttpConstants.CRLF);
To this:
httpMessage.append(status).append(" ").append(org.apache.commons.httpclient.HttpStatus.getStatusText(status)).append(HttpConstants.CRLF);
org.apache.commons.httpclient.HttpStatus.getStatusText is the method they are using in 1.3 to resolve the reason-phrase using the status code.
Thanks,
-Russ -
Error with Proxy - Soap sync scenario - "invalid http response:HTTP/1.1 5"
Hello,
I'm working on a PI scenario as displayed below:
Proxy <-> ECC <-> Soap
I've already imported the WSDL provided by 3th party and mapped one of the actions of the interface.
In the PI configuration I`d created the Scenario, using a Soap Receiver communication channel, passing only the URL and the action (no more options used).
When I`m trying testing using SPROXY or Runtime Workbench, the error bellow is displayed, and no receive message is created:
"com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: HTTP/1.1 5"
Someone knows the error cause?
Thanks,
Ana Paula LavieriHello,
"com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: HTTP/1.1 5"
HTTP 1.1 is not natively supported by standard SOAP or Plain HTTP Adapter, you should use SOAP Axis for that. See SAP Note 1039369 - FAQ XI Axis Adapter, under Receiver Adapter General -> 16. Can I use HTTP 1.1? Otherwise, you would have to ask the third-party to use HTTP 1.0 instead.
Hope this helps,
Mark -
What's matter?
I checked URL in jnlp file several times. but I coudn't know how to do.
Error mesagge shows below,
Exception: java.io.IOException: HTTP response 404 : LaunchDesc: null ]
at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
...etc
Anybody help, plz?Hi,
this might be a proxy config issue. Check Sun's Web Start FAQ for more details.
- Gerald -
Hi All,
Sometime ago I posted regarding an issue I was seeing on our TMS , where most of the remote devices seemingly showed up as loosing remote connection (no HTTPS Response - https://supportforums.cisco.com/discussion/12290956/tms-lost-https-communciation-devices-not-really). However, I could not figure out the root cause of the error, and now I have managed to break things again - probably due to a Java upgrade which broke TMSPE (see https://supportforums.cisco.com/discussion/12404166/looks-latest-update-java-8-update-31-will-break-tmspe-11).
However, I thought I would look at little more closely this time to see if I could figure out the problem.
I am seeing a lot of entries in the Security Log in TMS that seem to indicated that my the account used from a TMSPE connection has a bad or invalid password (this is set in "Administrative Tools --> Configuration --> Provisioning Extension Settings", but this password is correct (I can log into TMS with this account, and reset and restarted services etc).
The computer attempted to validate the credentials for an account.
Authentication Package: MICROSOFT_AUTHENTICATION_PACKAGE_V1_0
Logon Account: tmspeconnect
Source Workstation: TMS
Error Code: 0xc0000064
and
An account failed to log on.
Subject:
Security ID: IIS APPPOOL\TMSNet40AppPool
Account Name: TMSNet40AppPool
Account Domain: IIS APPPOOL
Logon ID: 0x214b6
Logon Type: 8
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: tmspeconnect
Account Domain: TMS
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc0000064
Process Information:
Caller Process ID: 0x860
Caller Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
Network Information:
Workstation Name: TMS
Source Network Address: 127.0.0.1
Source Port: 62114
Detailed Authentication Information:
Logon Process: Advapi
Authentication Package: Negotiate
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
I just wanted to check this like file/folder NTFS permissions, or any specific IIS permission . Is there a list of NTFS folder permissions for which the TMS required with regard to the "IIS APPPOOL", and perhaps what may need to be check in IIS?
Oddly, the error list above refers the our "TMSPEConnect" account from the TMS domain, however this is incorrect - TMS is the machine name. Still we ARE seeing similar error which reference the actual domain name, such as:
An account failed to log on.
Subject:
Security ID: IIS APPPOOL\TMSNet40AppPool
Account Name: TMSNet40AppPool
Account Domain: IIS APPPOOL
Logon ID: 0x49e55
Logon Type: 8
Account For Which Logon Failed:
Security ID: NULL SID
Account Name: tmspeconnect
Account Domain: mydomain
Failure Information:
Failure Reason: Unknown user name or bad password.
Status: 0xc000006d
Sub Status: 0xc000006a
Process Information:
Caller Process ID: 0xb18
Caller Process Name: C:\Windows\SysWOW64\inetsrv\w3wp.exe
Network Information:
Workstation Name: TMS
Source Network Address: 1.1.1.1 (changed external IP)
Source Port: 47620
Detailed Authentication Information:
Logon Process: Advapi
Authentication Package: Negotiate
Transited Services: -
Package Name (NTLM only): -
Key Length: 0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Idea welcome.
Cheers
ChrisHi all,
After a long a fraught weekend trying to fix things, I am not that much further on, but I am beginning to understand what it isn't........ I think :(
It looks as though the "DatabaseScanning" service, or anything that runs under the credentials of the "nt authority\network service" seems to have a problem.
The Audit log show lot of entries where services such as"TMSWebPublic" running under the ISS Application pool "tmsnet40apppool", and actions launched under our own credential appear to communicate just fine with the device, only for the 'network service' to time out the connection a short while later. The same goes for some (not all) of the Phone book updates, which also looks as though it runs under the credentials of the 'Network Service' account.
26/01/2015 08:30:54
nt authority\network service
Update
System
our-ctrl1
System status
NoResponse
TMSDatabaseScannerService
26/01/2015 08:30:54
nt authority\network service
Update
System
our-ctrl1
Connection status
NoHTTPSResponse
TMSDatabaseScannerService
26/01/2015 08:29:06
tmsnet40apppool
Update
System
our-ctr1l
System status
Idle
TMSWebPublic
26/01/2015 08:29:06
tmsnet40apppool
Update
System
our-ctrl1
Connection status
OK
TMSWebPublic
However, I still don't know at this point is this is related to the actual TMS front end, something to do with the domain and policies that have been applied to TMS, or the actual database, or even just communication with the back end database??? I did try running the services under a domain user (service) account, but then ran into other issues as I couldn't log into TMS.
BTW, removing TMS, and IIS and reinstalling did fix my second issue relating to the 'Communication Errors'.
Chris -
Invalid use of Null: 'CStr' - checkbox UPDATE - what the heck?!
Jeesh...you just think you're beginning to understand things
and then
something "weird" happens! Anyway, what is wrong with this?:
<input <%If
(CStr((rsCustomer.Fields.Item("deletethis").Value)) =
CStr("True")) Then Response.Write("checked=""checked""") :
Response.Write("")%> name="deletethis" type="checkbox"
id="deletethis"
value="1" />
I have this as part of an UPDATE form. If I place a tick in
the checkbox,
and submit it, it updates the record correctly as having a 1
value (True).
If I open the same UPDATE form, for the same record, it
displays a check in
the check box - great.
However, if the "deletethis" in the user record is initially
"False" (0),
the default value for all of my records, and I submit the
update form
without changing the deletethis checkbox, it seems to be
submitting a blank
value which means that when I re-open the UPDATE form for
this record, and
submit the UPDATE again, I get this:
Error Type:
Microsoft VBScript runtime (0x800A005E)
Invalid use of Null: 'CStr'
//edit-customer.asp, line 838
I'm sure this is because it is trying to submit a blank
value, where it
needs to be either 0 or 1. But why is it submitting
"deletethis" as a blank
value?
When I check my SQL database, the deletethis field shows no
value, not even
the word NULL and certainly not a 1 or 0.
Also, if one of my records already has a 1 value, and I
change this in the
UPDATE form, but "unchecking" the deletethis checkbox, again
it submits a
blank value! Nyaarg!
For reference, here is my UPDATE code:
<%
If (CStr(Request("MM_update")) = "editcontactdetails") Then
If (Not MM_abortEdit) Then
' execute the update
Dim MM_editCmd
Set MM_editCmd = Server.CreateObject ("ADODB.Command")
MM_editCmd.ActiveConnection = MM_connNAME_STRING
MM_editCmd.CommandText = "UPDATE dbo.tblCustomers SET
firstnames = ?,
surname = ?, billbusiness = ?, billaddress = ?, billaddress1
= ?,
billaddress2 = ?, billcity = ?, billregion = ?, billcountry =
billpostcode = ?, billtelephoneday = ?, billmobile = ?,
billtelephoneeve =
?, billemail = ?, billlocationinfo = ?, username = ?,
password = ?,
deletethis = ? WHERE customerID = ?"
MM_editCmd.Prepared = true
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param1", 202,
1, 150, Request.Form("firstnames")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param2", 202,
1, 100, Request.Form("surname")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param3", 202,
1, 150, Request.Form("businessname")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param4", 202,
1, 100, Request.Form("billaddress")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param5", 202,
1, 100, Request.Form("billaddress1")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param6", 202,
1, 100, Request.Form("billaddress2")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param7", 202,
1, 100, Request.Form("billcity")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param8", 5,
1, -1, MM_IIF(Request.Form("billregion"),
Request.Form("billregion"), null))
' adDouble
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param9", 202,
1, 100, Request.Form("billcountry")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param10", 202,
1, 75, Request.Form("billpostcode")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param11", 202,
1, 75, Request.Form("billtelephoneday")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param12", 202,
1, 50, Request.Form("billmobile")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param13", 202,
1, 75, Request.Form("billtelephoneeve")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param14", 202,
1, 150, Request.Form("billemail")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param15", 203,
1, 1073741823, Request.Form("billlocationinfo")) '
adLongVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param16", 202,
1, 25, Request.Form("username")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param17", 202,
1, 25, Request.Form("password")) ' adVarWChar
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param18", 5,
1, -1, MM_IIF(Request.Form("deletethis"),
Request.Form("deletethis"), null))
' adDouble
MM_editCmd.Parameters.Append
MM_editCmd.CreateParameter("param19", 5,
1, -1, MM_IIF(Request.Form("MM_recordId"),
Request.Form("MM_recordId"),
null)) ' adDouble
MM_editCmd.Execute
MM_editCmd.ActiveConnection.Close
' append the query string to the redirect URL
Dim MM_editRedirectUrl
MM_editRedirectUrl = "index.asp"
If (Request.QueryString <> "") Then
If (InStr(1, MM_editRedirectUrl, "?", vbTextCompare) = 0)
Then
MM_editRedirectUrl = MM_editRedirectUrl & "?" &
Request.QueryString
Else
MM_editRedirectUrl = MM_editRedirectUrl & "&" &
Request.QueryString
End If
End If
Response.Redirect(MM_editRedirectUrl)
End If
End If
%>
Please, can someone just tell me what it is, because I can't
find an
explanation in the documentation!
Much appreciated
Nath.Point taken David, ;o) but you must admit that Dreamweaver is
not strictly
marketed as such.
"With Dreamweaver 8, web developers go from start to finish,
creating and
maintaining basic websites to advanced applications that
support best
practices and the latest technologies."
(source:
http://www.adobe.com/uk/products/dreamweaver/)
Oh, and then there's the price tag! :-o
I personally think they could have marketed "Notepad" a
little better! :o)
Nath.
"David Powers" <[email protected]> wrote in message
news:ej25kb$7nv$[email protected]..
> Lionstone wrote:
>> DW offers a helping hand when it comes to database
integration, but you
>> should expect to do the bulk of the work yourself.
Beyond a simple
>> insert/update/delete of a single record in a single
table, it's all up to
>> you.
>
> Hear, hear. If only more people realized that this is
the case, they would
> find Dreamweaver a lot easier to use.
>
> --
> David Powers
> Adobe Community Expert
> Author, "Foundation PHP for Dreamweaver 8" (friends of
ED)
>
http://foundationphp.com/ -
Error : CGImageCreate: invalid image colorspace: NULL.
Hi,
I am unable to launch Intellij IDEA from command line using ./idea.sh on my Mac (OS 10.7.4). The intellij IDEA flash screen comes up after which I am seeing the following error and the application hangs -- the IDEA does not open. I have been trying to get over this for a long time but no help. Any help is appreciated.
bash-3.2$ ./idea.sh
Dec 7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:28 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextGetCTM: invalid context 0x0
Dec 7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextSetBaseCTM: invalid context 0x0
Dec 7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextGetCTM: invalid context 0x0
Dec 7 17:37:31 rahusrivastava.ariba.com java[1789] <Error>: CGContextSetBaseCTM: invalid context 0x0
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
2012-12-07 17:37:34.623 java[1789:c07] CWindow's _nativeShow encountered error: *** -[__NSPlaceholderArray initWithObjects:count:]: attempt to insert nil object from objects[0]
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
Dec 7 17:37:34 rahusrivastava.ariba.com java[1789] <Error>: CGImageCreate: invalid image colorspace: NULL.
bash-3.2$
Thanks,
Rahul.My input certainly wasn't intended to ba sarcastic, so please forgive me if it seemed so.
Seroiusly, always do a search before updating, http://discussions.apple.com/search.jspa?objID=f1201&search=Go&q=update+problem, NI is flaky at best IMHO, did you heck with them yet to see if a patch is available?
Always wait a few weeks before updating, a reinstall is a headache, goodluck! -
The following error occurs.
Welcome to the Exchange Management Shell!
Full list of cmdlets: Get-Command
Only Exchange cmdlets: Get-ExCommand
Cmdlets that match a specific string: Help *<string>*
Get general help: Help
Get help for a cmdlet: Help <cmdlet name> or <cmdlet name> -?
Show quick reference guide: QuickRef
Exchange team blog: Get-ExBlog
Show full output for a command: <command> | Format-List
Tip of the day #0:
Did you know that the Identity parameter is a "positional parameter"? That means you can use:
Get-Mailbox "user" instead of: Get-Mailbox -Identity "user"
It's a neat usability shortcut!
VERBOSE: Connecting to mail1.dorothy.local.
New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
the destination computer. The content type is absent or invalid. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
Exception calling "GetComputerSite" with "0" argument(s): "The Specified directory object cannot be found."
At C:\Program Files\Microsoft\Exchange Server\V15\bin\ConnectFunctions.ps1:164 char:2
+ $localSite=[System.DirectoryServices.ActiveDirectory.ActiveDirectorySite]::GetC ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ActiveDirectoryObjectNotFoundException
Failed to connect to an Exchange server in the current site.
Enter the server FQDN where you want to connect.: mail1.dorothy.local
VERBOSE: Connecting to mail1.dorothy.local.
New-PSSession : [mail1.dorothy.local] Connecting to remote server mail1.dorothy.local failed with the following error
message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from
the destination computer. The content type is absent or invalid. For more information, see the
about_Remote_Troubleshooting Help topic.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotin
gTransportException
+ FullyQualifiedErrorId : -2144108297,PSSessionOpenFailed
Randy CheekGood Morning,
Log into the server with an account that has appropriate Exchange rights, not a local account.
Note: By default - Domain Admins don't have Exchange rights.
Dame Luthas, ITILv3, MCSE Messaging 2013, MCSA, MCITP
My Technical Blog: http://thelifestrategist.wordpress.com
Discipline is the Difference between Goals and Accomplishments
If this post is useful, please hit the green arrow on the left & if this is the answer hit "mark as answer" -
Adobe Document Services - http Response 500 - How to configure the logging?
We are building an application in Web Dynpro Java that fetches data from an R/3 system via an RFC connection and is then supposed to show said data in a pdf within an iview. For that task we want to use the InteractiveForm UIElement. We bind the data to its pdfSource in the iViewu2019s context. Currently the form only consists of a text field bound to one attribute element of the pdfSource context node.
The ADS webservice is configured according to the manuals found here:
http://help.sap.com/saphelp_nw70/helpdata/en/fa/0b700d6cfd4e03a8ec2186ba6ff4af/frameset.htm
and tested successfully under the following link
http://<portal_host>:<port>/AdobeDocumentServices/Config?style=document
However, when we execute the application, an error occurs in the webservice generating the pdf, namely Invalid Content-Type:text/html. The error occurs when the iView containing the form is shown for the first time, even before the attributes of the pdfSource context are filled with data (we expect to see an empty form).
As it seems the webservice is expected to return a MIME type of either application/pdf or text/xml (we donu2019t know for sure since the SAP manuals and forums are inconclusive here), but instead we get text/html. This seems to be due to the fact that the webservice exits with an http response 500 Internal Server Error (we used several network monitoring tools to confirm that such a response is sent). Since such http responses are but html files with an empty body, yet not xml or pdf, the aforementioned error does make sense to us, but we do not know what Internal Error has caused it.
The only help that SAP seems to provide for an error u201CInvalid Content-Type:text/htmlu201D in context with ADS points to an expiring password or otherwise poor configuration of the ADSUser, which (most certainly) is not our case here since, and as said above, the configuration was and can be tested successfully.
We then tried to view the logs for this error on the machine where the J2EE engine is running with ADS installed according to this (not very comprehensible) guide:
http://help.sap.com/saphelp_nw70/helpdata/de/97/ccfc3f0ac2c642e10000000a1550b0/frameset.htm
We cannot find anything relevant in the server.log of the Visual Administrator except this message (it is generated exactly when our error occurs u2013 the trace severity is set to ALL for all Adobe application elements according to manual):
Date , Time , Message , Severity , Category , Location , Application , User
12/08/2010 , 13:50:46:511 , application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error.
The error is: com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Failed to GENERATEPDF
Exception id: [0800274DA7ED00850000005B00000900000496E5919E28BA] , Error , /System/Server/WebRequests , com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl , sap.com/tcwddispwda , Guest
There is no error.pdf to be found on the file system and since neither have we known nor are we told by the error message, whether the underlying cause is is a render error or connection error or configuration error or what not, we donu2019t know whether the error.pdf is supposed to be generated at all.
Or could there be any other reason why generation didnu2019t take place?
Furthermore we canu2019t seem to be able to find any logs more verbose or detailed about this issue - at least not within the Visual Administrator or the portalu2019s nwa.
How is it possible to properly debug the webservice for pdf-generation or at least to retrieve a fully detailed log containing all notifications and exception stack traces etc.?
I am assuming that we are making some basic mistakes regarding the logging configuration - but what?
Our goal is to know what causes the 500 Internal Server Error response that causes the Incorrect Content-Type exception.
We are using a NetWeaver 7.01 portal installation with Adobe Document Services 7.01 installed on a Windows Server 2003 platform.
Any help is highly appreciated!
SergHave you tried restarting the Java PDF object in Visual Administrator? Once you do all of your config, you have to restart the PDF object (sao.com/tcwdpdfobject) for the changes to take place. I am assuming you've run all of the test programs in SAP (FP_TEST_00, FP_TEST_03, etc.). Is there any chance that the ADSUSER is locked somehow?
-
HTTP response error :Connection reset
Hi all,
I am getting following error in log while sending message to the trading partner and the main problem is that once this error comes then after that I am not able to send any more message to any of my Trading Partners. Even if I try to send message to any other Trading Partner, nothing comes in the B2B log and report as well. After restarting the B2B I am able to send message again to other Trading Partners.
Can anyone please tell the reason for getting this error? I also want to know that after getting this error once, why am I not able to send message to any Trading Partner?
2008.12.12 at 06:41:07:647: Thread-13: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1006
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
at oracle.tip.transport.TransportException.create(TransportException.java:91)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:627)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:980)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1744)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sun.net.ssl.internal.ssl.InputRecord.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.InputRecord.read(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.HandshakeOutStream.flush(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
at java.io.ByteArrayOutputStream.writeTo(ByteArrayOutputStream.java:112)
at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java:3018)
at HTTPClient.HTTPConnection.handleRequest(HTTPConnection.java:2843)
at HTTPClient.HTTPConnection.setupRequest(HTTPConnection.java:2635)
at HTTPClient.HTTPConnection.Post(HTTPConnection.java:1107)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:590)
... 8 more
2008.12.12 at 06:41:07:647: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2008.12.12 at 06:41:07:648: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Enter
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Leave
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset
2008.12.12 at 06:41:07:651: Thread-13: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
2008.12.12 at 06:41:07:652: Thread-13: BusinessLogicLayer - (DEBUG) Push Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: BusinessLogicLayer - (DEBUG) Pop Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2008.12.12 at 06:41:07:658: Thread-13: B2B - (DEBUG) Engine:notifyApp Enter
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = null
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0AF77A6111E29ED374E000001BDE3D60</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset</errorText>
<errorDescription>
<![CDATA[Machine Info: (dys094w004)
Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.12.12 at 06:41:07:692: Thread-13: B2B - (DEBUG) Engine:notifyApp Exit
2008.12.12 at 06:41:07:693: Thread-13: B2B - (DEBUG) DBContext commit: Enter
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Transaction.commit()
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Leave
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2008.12.12 at 06:41:07:696: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Please help.
Thanks & Regards,
Anuj DwivediHi Sinkar,
Thanks for the reply. I confirmed it with my Trading Partner and their server is not running but still I want to know that why am I not able to send message to any other Trading Partner after getting this error once. And if I restart the server, it again acts normally and I am able to send message to other Trading Partners.
SSL is configured properly because I was able to communicate with this Trading Partner earlier when their server was up.
We are working on 10.1.2.3.0 with 7457066 MLR 5 patch. Please guide if any other patch required.
Thanks for the help.
Warm Regards,
Anuj Dwivedi -
Received HTTP response code 500 : Error during conversion of XI message
hi
Facing the error , "Received HTTP response code 500 : Error during conversion of XI message"
This is the fist time i am configuring the sender soap ( Axis Framework in the SOAP Adapter) (Quality of service Best effort) communication channel and i am getting the above error did any body face this error.
01.09.2011 12:02:32 Information The message status was set to DLNG.
01.09.2011 12:02:32 Error SOAPFault received from Integration Server. ErrorCode/Category: XIServer/ATTRIBUTE_INITIAL; Params: Manifest cid:6D90482BF678436D75928FC8B9930519; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Attribute Manifest cid:6D90482BF678436D75928FC8B9930519 is initial
01.09.2011 12:02:32 Error Transmitting the message using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during conversion of XI message.
regards
sandeep
Edited by: pendyalas on Sep 1, 2011 12:20 PMI found a link with respect to similar error , sap note 1522630 has been used to resolve this error.
i will try and see if it works.
AXIS Sender Adapter Failure after upgrade to PI 7.11 SP06
regards
sandeep -
I have this code for a long time and it always works:
URL url = new URL("http://www.infoamistades.net/load.do");
URLConnection urlConnection = null;
urlConnection = url.openConnection();
urlConnection.setRequestProperty("Content-Type","text/html; charset=utf-8");
urlConnection.setRequestProperty("Accept-Charset","utf-8");
BufferedReader bin = new BufferedReader(new InputStreamReader(urlConnection.getInputStream(),"utf-8"));
but....suddenly I always have the java.io.IOException: Server returned HTTP response code: 500 (?!?!?)
using this URL works properly
URL url = new URL("http://www.infoamistades.net/");
but now it doesn't works with URL url = new URL("http://www.infoamistades.net/load.do");
and putting thia addrees to the browser it works, of course..
no changes at the server, not firewalls.. (?!?!)
thanks,Hi,
Actually I am also having exactly same problem that you mentioned, I am new to the world of servlets. I could not get what you mean by "put variable in the request" Please tell me exactly what to do to solve this problem.
Someone please help.........
Maybe you are looking for
-
updated router now printer wont connect. tried downloading drivers and all it did was wipe the info i had there already and said download wont run! tried everything everyone suggests no joy. On windows 7 and getting sick of the hassle. Rang customer
-
Hey guys, Can anyone please help me find out what is the JDBC url for Yahoo Finance Database that stores the values of the historical stock quotes . I desperately need it for my java application in which I require to access the database in order to g
-
Passing multiple parameter to where condition
Hi all, I want to pass multiple parameters to where condition.. it is as follows: i'll pass only TODAY date to M_DATE_TO variable. CURSOR C_COUNT(M_DATE_FROM DATE, M_DATE_TO DATE) IS SELECT COUNT (*) FROM table_name WHERE TRUNC(table_name.join_da
-
Photoshop CS2 9.0.2 upgrade not taking
Photoshop is trying ad infinitium to install this update into itself without success. Any ideas what the problem is? Ed
-
Can we Highlight the TC record thoughout the screen.
hi masters, i have small doubt... can we highlight the TC record throughout the screen? i have used the SET CURSER... Which works fine, but as soon as we take out the cursor the cursor will go. so can we in anyway highlight that record throughout the