Invalid Input Error When Compiling in CS5

I am porting and AIR for Android app over to iPhone, but when I try to compile I get the following error:
Invalid Input
Invalid Input swf. Error executing : /Applications/Adobe Flash CS5/PFI/aot/lib/go.jar
Has any one else seen this? Do you know how to fix it?
Thanks.

You need to update Flash CS5 under Help > Updates.
I had the same problem. I thought Flash was up to date because the Adobe Updater pops up regularly. The Adobe Updater is just for CS4 apps, so you won't get the updates you need for CS5.
~Victoria~

Similar Messages

Error when compiling invalid object XLA_00555_AAD_C_011117_PKG

Hello folks,
i am getting error when compiling the following object.
XLA_00555_AAD_C_011117_PKG
here i have mentioned below is what i have done for that invalid object.
SQL> select owner,object_name,object_type
2 from dba_objects
3 where status='INVALID';
OWNER
OBJECT_NAME
OBJECT_TYPE
APPS
XLA_00555_AAD_C_011117_PKG
PACKAGE BODY
SQL> connect apps/apps
Connected.
SQL> alter package XLA_00555_AAD_C_011117_PKG compile body;
Warning: Package Body altered with compilation errors.
SQL> show errors;
Errors for PACKAGE BODY XLA_00555_AAD_C_011117_PKG:
LINE/COL ERROR
32209/1 PLS-00103: Encountered the symbol "NVL" when expecting one of the
following:
* & - + / at mod remainder rem then <an exponent (**)> and or
|| multiset
The symbol "*" was substituted for "NVL" to continue.
32209/23 PLS-00103: Encountered the symbol "=" when expecting one of the
following:
. ( * % & - + / at mod remainder rem then <an exponent (**)>
and or ||
The symbol "* was inserted before "=" to continue.
LINE/COL ERROR
Please Provide me solution as soon as possible
Regards,
Farook

Not exactly a custom object.
XLA%AAD%PKG packages will be built dynamically by the XLA's AAD compiler. This will be used while generating the accounting entries.
This error may occur due to two reasons:
a) missing source, which is used in the setup
SELECT *
FROM xla_conditions xc
WHERE application_id = &appl_id
AND xc.source_code IS NOT NULL
AND NOT EXISTS (SELECT 1
FROM xla_sources_b xsb
WHERE xc.source_application_id = xsb.application_id
AND xc.source_type_code = xsb.source_type_code
AND xc.source_code = xsb.source_code);
b) wrong conditions in setup
SELECT application_id,amb_context_code,entity_code,event_class_code
,accounting_line_type_code,accounting_line_code
,segment_rule_detail_id,description_prio_id
FROM xla_conditions xc
WHERE application_id = &appl_id
GROUP BY application_id,amb_context_code,entity_code,event_class_code
,accounting_line_type_code,accounting_line_code
,segment_rule_detail_id,description_prio_id
HAVING COUNT(*) > 1
AND SUM(NVL2(source_code,1,0)) <> SUM(NVL2(logical_operator_code,1,0)) + 1;
For (a) check any patch available for the missing source. Otherwise contact Oracle Support.
For (b) check the condition of the JLT / JED / ADR, whether anything is wrongly entered.
By
Vamsi

Pragma error when compiling with SDK X

Hi,
I am trying to compile my plugin application (which compiled fine with the previous sdk) using the SDK X, but receive errors in CAVAlert.h on the exception handler construct DURING, HANDLER, END_HANDLER.
The errors are listed here:
Headers/API/CAVAlert.h:156:3: error: 'suppress' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: 'warning' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: '__pragma' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'jmp_buf'
Headers/API/CAVAlert.h:156:3: error: 'ASException' was not declared in this scope
Headers/API/CAVAlert.h:156:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:156:3: error: expected ';' before 'struct'
Headers/API/CAVAlert.h:162:3: error: request for member 'E_RETURNOutsideDURINGBlock' in 'gBadReturnCatcher', which is of non-class type 'int'
Headers/API/CAVAlert.h:162:3: error: expected ')' before ':' token
Headers/API/CAVAlert.h:162:3: error: expected ';' before 'int'
Headers/API/CAVAlert.h:165:3: error: 'ENDHANDLEROutsideHANDLER' was not declared in this scope
To compile against to SDK X all I did was:
1) Used PIMain.c from the SDK X API directory.
2) Changed ACRO_SDK_LEVEL=0x00090000 => ACRO_SDK_LEVEL=0x000A0000
3) Changed the include directories to point to the new SDK X directories
Is there another directive I must add to get the plugin to compile with SDK X?
My preprocessor list is as follows:
ACRO_SDK_LEVEL=0x000A0000
HAVE_W32API_H
PDMETADATA_HFT=1
PLUGIN=1
WIN32
WIN_ENV
WIN_PLATFORM
WXUSINGDLL
_CRT_SECURE_NO_DEPRECATE
_DEBUG
_WINDOWS
__GNUWIN32__
__WIN32__
__WXMSW__
Thank you,
Magda

Without seeing your code, I can't really help.
If you want help with your code, open a formal support ticket.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Tue, 6 Dec 2011 04:09:25 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: Pragma error when compiling with SDK X
Pragma error when compiling with SDK X
created by magdakuit<http://forums.adobe.com/people/magdakuit> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4066378#4066378

Method not found in class errors when compiling project

Hi,
I am getting the following errors when compiling my project:
Error(3,8): ReqLinesNotificationsVORowImpl not found
Error(25,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(31,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(37,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(43,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(49,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(55,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(61,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(67,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(67,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(79,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(85,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(91,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(97,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(103,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(109,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(115,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(121,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(127,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(133,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(139,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(145,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(151,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Number) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(157,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(163,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(169,25): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(175,9): method setAttributeInternal(java.lang.String, java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(181,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(187,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Date) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(193,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
Error(199,9): method setAttributeInternal(java.lang.String, oracle.jbo.domain.Date) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImplError(205,23): method getAttributeInternal(java.lang.String) not found in class oracle.apps.icx.por.wf.server.ReqLinesNotificationsVOExRowImpl
I have ReqLinesNotificationsVORowImpl and ReqLinesNotificationsVOImpl files in myprojects directory. Can anyone help please?
Thanks

Hi,
From the error it seems that the code is refering ReqLinesNotificationsVOExRowImpl file.
Please make sure that its class file is present in myclasses folder.
Since u have mentioned that ReqLinesNotificationsVORowImpl is already placed in myclasses folder. Hope this should resolve your issue.
Regards,
Raj Papdeja

Errors when compiling the web service (SAP Web Service Design Tool)

After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

Hello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]

Invalid image error when saving to pdf

I keep getting an invalid image error when saving a MS Publisher file as a pdf. Can anyone help with solving this issue?

You need to provide system and version info and explain how you actualyl produce the PDF. Unless you use the Acrobat PDF printer, I don't see how Adobe software would be involved in any of this, as recent versions of MS Office products can save PDFs natively...
Mylenium

.class expected error when compiling

Ive been getting this frustrating error when compiling. My program is essentially supposed to add the values in two matrixes and return a new matrix using the added values
Heres my code:
   public Matrix add(Matrix comp)
        int[][] temp = new int[this.numRows()][this.numCols()];
        for (int a = 0; a < comp.numRows(); a++) {
            for (int b = 0; b < comp.numCols(); b++) {
                temp[a] = this.myCells[a][b] + comp.getVal(a, b);
Matrix addedMatrix = new Matrix(temp[][]);
return addedMatrix;
heres the constructor for Matrix object:
public Matrix(int[][] mat)
        int[][] myCells = new int[mat.length][mat[0].length];
        for (int i = 0; i < mat.length; i++) {
            for (int j = 0; j < mat[0].length; j++) {
                myCells[i][j] = mat[i][j];
    }getVal, numRows, and numCols are all helper methods that just return values.
The error is '.class' expected in the line which says Matrix addedMatrix = new Matrix(temp[][]); I checked for extra brackets but there dont seem to be any.
Any help would be appreciated. Thanks.

I think you just needMatrix addedMatrix = new Matrix(temp);

HDL Interface Node (UsingFilterCore.vi) and "timing constraint" error when compiling

I'm trying to use the HDL interface node in LV8 FPGA with a PCI-5640R and had the "timing constraint" error when compiling my VI, however, the same VI was successfully compiled on a CRIO-9104, it seems the FPGA on PCI-5640R is not good as the one on CRIO-9104, or I'm not using it right. could you please kindly help me out?
I tested it with the sample code downloaded from NI website
( http://zone.ni.com/devzone/conceptd.nsf/webmain/456722DDDE17986A86256E7B0065EE6F ) which demonstrates using an IP core for a filter. To simplify it, I only keep the HDL Interface Node and the While Loop (see "UsingFilterCore.vi" in attached zip file), and then I created 2 projects including this VI (1 for CRIO-9104, in sub folder "CRIO-9104", the other for PCI-5640R, in sub folder "IFRIO 5640"). When opening the 2 projects separately in LV8.0 and selecting the VI for compile, the one for 9104 passed and the other failed. Here I attach the source code, error message screenshot and the NIReport from MAX, hope you can reduplicate the problem.
Can you help me out？ Thanks very much !
Message Edited by Jerry_L on 03-26-2006 09:28 PM
Message Edited by Jerry_L on 03-26-2006 09:29 PM

Hi Jerry,
I'm just tried to make all these steps by myself (http://zone.ni.com/devzone/cda/tut/p/id/3516). I have generated FIR filter using Xilinx ISE and got *.VHD file which was going to use in HDL Node.
In the Parameters tab of the HDL Interface Node configuration dialog, double-click in the Names column to add parameters. Create parameters as shown below.
Next, switch to the Code tab. Notice that your parameters now appear in the entity section. To complete the next two sections of code, you will need to refer to the filt.vhd file that you generated earlier and interface the filter core to the LabVIEW FPGA execution system.
1. The first problem I met was integrating VHDL code from earlier generated *.VHD file to CODE tab in properties of HDL Node. Content of entity section in *.VHD is not the same that in your attached file. Please check it in attached files. I'm sure this is the main reasen of problem.
Next, switch to the External Files tab. Click the Add File button and select the filt.edn file that you created earlier. This is the EDIF netlist file that you generated earlier.
2. I have no idea where can I get it and when during filter generation using Xilinx ISE it was generated too. How can I get it? I had to use your attached file filt.edn.
3. After that I have made the same schematics like you have in your VI FPGA and try to run. But I've got two error messages:
HDL Interfave node: enable chain not handled. Details: Refer to the documentation for the correct assignments for the enable_out output from your HDL code.
HDL Interfave node: output not handled. Details: Right-click the node, select Configure to open the Configure HDL Interface Node dialog box, and use the Code tab to handle all output parameters.
Actually I need to model FIR filter:
Bandwidth 200-600 Hz
Sampling 8 KHz
Attenuation 80 dB
That's why I tried to follow all these steps by myself to understand how does it work.
Thanks a lot.
Nikita
Attachments:
Filter1.vi ‏16 KB

Invalide identifier error, when use subselect

Hi all,
I got "ORA-0094: sp.spriden_pidm invalid identifier "error when runing the following query.
select (select t.name from
(select rownum row_number, s.spriden_last_name name
from spriden s
where s.spriden_pidm = sp.spriden_pidm) t
where t.row_number = 1) last_name
from spriden sp
where sp.spriden_pidm = 70105;
Any one has an idea why this is happening?
Thanks

Unless I am missing something here, this looks like a straight pivot query to me.
SQL> with my_test AS (SELECT 1 id, 'June' contact_name FROM dual UNION ALL
2                   SELECT 1, 'Email' FROM dual UNION ALL
3                   SELECT 1, 'Mark' FROM dual UNION ALL
4                   SELECT 2, 'Tom' FROM dual),
5       my_test_2 AS (SELECT 1 id, trunc(sysdate) act_date FROM dual UNION ALL
6                     SELECT 1, trunc(sysdate-1) FROM dual UNION ALL
7                     SELECT 2, trunc(sysdate-1) FROM dual)
8 SELECT id, act_date,
9         MAX(DECODE(rn, 1, contact_name)) nc1,
10         MAX(DECODE(rn, 2, contact_name)) nc2,
11         MAX(DECODE(rn, 3, contact_name)) nc3
12 FROM (SELECT m.id, contact_name, act_date,
13               ROW_NUMBER() OVER (PARTITION BY m.id
14                                  ORDER BY contact_name) rn
15        FROM my_test m, my_test_2 m2
16        WHERE m.id = m2.id and
17              m2.act_date = trunc(sysdate-1))
18 GROUP BY id, act_date;
        ID ACT_DATE    NC1   NC2   NC3
         1 11-Sep-2008 Email June Mark
         2 11-Sep-2008 TomAssuming that you have a known maximum number of possible values in my_test for a given id this should work. You may need to use something other than the contact_name in the order by in the row_number function if you require the values in specific columns, but given your sample data, I have no idea what that might be.
John

'Invalid Currency' error when attempting to deliver order

Hi Experts,
I have a sales order which cannot be despatched or invoiced because whenever I try to convert the order into a delivery note or AR Invoice I get error message:
Invalid Currency [Message 131-74]
I have also tried adding a delivery note and the Copy From function with no success.
The BP is set up to use All Currencies and the order is only in GBP.
Thanks
Jon

What version of SAP Business One are you using?
Have you had a look at SAP Note # 1252328 ?
Invalid currency error when copying a Sales Order
Symptom
You are managing an item with the FIFO valuation method. You have some open layers with zero cost. You create a Sales Order for this item and want to copy it to the next marketing document: a Delivery or an A/R Invoice. You receive the following error: Invalid currency [Message 131-74]
Other terms
OINM,FIFO, zero cost, sales order ,delivery ,invoice
Reason and Prerequisites
Application error
example:
1.Create item managed by FIFO.
2.Goods Receipt for item ,quantity10, no price.
3.Goods Receipt PO for item, quantity 10.price 5
4.Sales Order for item ,quantity 11,
5.e.g.copy it to Delivery or AR Invoice
You will receive the error:Invalid Currency[Message 131-74]
the same error message when you use the copy from function
Solution
SAP plans to fix this issue in a future patch. See the info.txt file on SAP Service Marketplace to verify when the fix was included.
Apparently its affecting SAP Business One 2007 B Patch 13 and SAP Business One 2007 A Patch 47

Assertion error when compiling ANSI C code - Forte 6.2

I have a compilation error when compiling on my Ultra 10
using Forte 6.2 C compiler (5.3). Here's the line:
teds@enigma[195]% cc -xtarget=ultra3 -xarch=v8plusb -dalign -fns -fsimple=2 -ftrap=%none -xlibmil !!
cc -xtarget=ultra3 -xarch=v8plusb -dalign -fns -fsimple=2 -ftrap=%none -xlibmil -xO4 -DCMO_DEBUG_DETAIL -DUSE_DATACONN -c cmoisubs.c -o cmoisubs.o
cg: assertion failed in file ../src/ms_pipe/sp_interface.cc at line 689
cg: Internal error: constval annotation set on reg with multiple defs
cg: 1 errors
cc: cg failed for cmoisubs.c
teds@enigma[196]%
Does anyone have any ideas?
Thanks,
Ted

Are both files in the same directory? Is the directory in your classpath?

ERROR:HDLParsers:3370 Compile Error when compiling for NI-5640R

I'm trying to get a FFT Core working inside the NI-5640R FPGA. In my latest debugging step, I have received the following error when compiling:
Compiling vhdl file "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" in Library work.
Entity <bushold> compiled.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 142. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkMaxWidth.
ERROR:HDLParsers:3370 - "C:/NIFPGA82/srvrTmp/LOCALH~1/IFBC3E~1/bushold.vhd" Line 143. Value 0 is not included in the range, 1 to 2147483647, of kConfiguration_ClkCounterWidth.
Has anybody seen this before? I am including my FPGA VI that is causing this error (FFT (FPGA).vi). I am also including my previous step in debugging the FFT that worked (FFTworking (FPGA).vi).
Attachments:
FFT (FPGA).vi ‏125 KB
FFTworking (FPGA).vi ‏119 KB

Hi,
The main cause of this error message is the large array size. You configured a 16-bit fixed-size array with 4096 element for a total array size of 65536 (16 * 4096). Array uses a lot of FPGA resource and the general recommendation to limit the use and size of array as much as possible on the FPGA VI. This VI will certainly overmap the FPGA resource because of the large array size.
Although this error message is not directly related to the array size, it has however been reported to R&D (#4G3COBJ0) for further investigation. A possible workaround would be to reduce the size of the array or use DMA FIFO to pass the data to the host.
Thanks for the feedback!
Tunde A.
LabVIEW FPGA

[svn:fx-trunk] 10641: Fix ambiguous reference error when compiling a performance test.

Revision: 10641
Author:   [email protected]
Date:     2009-09-28 08:44:38 -0700 (Mon, 28 Sep 2009)
Log Message:
Fix ambiguous reference error when compiling a performance test.
Fully qualify mx.events.Requests in generated code for FlexInit.
QE notes: None.
Doc notes: None.
Bugs:
Reviewer:
Tests run: checkintests
Is noteworthy for integration: no.
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java

Start by validating your HTML code. You have numerous code validation errors on line 230 caused by UPPER case tags. XHTML doc types, need lower case tags. After you fix your code errors, republish your page.
HTML Validator - http://validator.w3.org
CSS Validator - http://jigsaw.w3.org/css-validator/
HTML & CSS Tutorials - http://w3schools.com/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

Error when compiling logic file

Hi there folks,
I have a strange problem when compiling a logic file that I haven't seen before, and I can't seem to find an answer for it anywhere so I'm hoping you can help.
I have a simply piece of script logic that begins with the normal *XDIM_MEMBERSET section, specifically one line:
*XDIM_MEMBERSET DATASRC = INPUT
I have a dimension called DATASRC, and a member in that dimension called INPUT, so there is nothing strange here.
However, when I try to validate the script I get the following error message:
"Error: Unlimited recursion using a user defined function in line : *XDIM_MEMBERSET DATASRC=INPUT"
There is nothing wrong with this line, and it certainly isn't a user-defined function!
I can't find anything about this in the SAP Notes, and have never seen this error before - any ideas that could help?
Thanks very much in advance.
Jason

First, always define your version, so we can isolate our test or idea in a similar version.
Next, If you modify the statement for any other combination of both DataSrc=[someothermember] and otherDIm=[othermember] and run the validation, does it fail? If you were to run say Account=Input, would that fail? If you rename INPUT to INPUTS, does it then V&P?
Is there any statement in a constants file that use INPUT?
My idea is to try to isolate if the issue is with the member, or dimension or both, or neither and related to BPC code. Then if the problem doesn't resolve, you have tests for teh BPC Support team.
Hope that helps.

Fbe internal error when compiling OpenSSL 1.0.2 64 bit

./Configure solaris64-sparcv9-cc no-shared -m64 -xcode=pic32 -xldscope=hidden
./make
cc -I.. -I../.. -I../modes -I../asn1 -I../evp -I../../include -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -m64 -xcode=pic32 -xldscope=hidden -xtarget=ultra -xarch=v9 -xO5 -xstrconst -xdepend -Xa -DB_ENDIAN -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DGHASH_ASM -c -c -o md5-sparcv9.o md5-sparcv9.S
cc: Warning: -xarch=v9 is deprecated, use -m64 to create 64-bit programs
/opt/solarisstudio12.4/bin/fbe: "/tmp/cpp.1426232079.27660.01.s": , approx line 1041: internal error: pic_relocs(): hh reltype?
Reading around, it seems to be caused by setting -xcode=pic32 but I need to set that because I am building a static library that will be linked into a shared library and that requires relocation.
Changing the makefile so that the -xcode=pic32 flag is not passed when compiling .s files solves the problem but I am unsure if I will have an invalid build.
Previous OpenSSL versions have compiled cleanly with this flag set.
Does the message 'internal error' indicate that it is a bug in the compiler? If so is there a fix?
Can anyone advise please?

Internal errors, such as the one you encountered, are generally considered compiler bugs. They indicate that the compiler reached an unexpected state and therefore bailed out. I opened bug 20703141: internal error: pic_relocs(): hh reltype? to investigate. I see the same error message emitted by the current Studio development release; I will update this thread if I find a work-around.
Thanks,
Mark

Invalid Input Error When Compiling in CS5

Similar Messages

Maybe you are looking for