Invalid input marker for interface range

I am trying to create a voice lab, I have a 1700 series cisco router and a 3500lx switch. I have configure the vlans,and trunked fa0/0 on router and fa0/1 on switch, i and unable to create a interface range fastethernet fa0/2 - 24. I get a invalid input marker it will not take any command with range in it. I can see all the ports

Duplicate post, please post here -
https://supportforums.cisco.com/thread/2262085?tstart=0
Jon

Similar Messages

BW error: "invalid call sequence for interface when recording changes"

I am getting the error "invalid call sequence for interface when recording changes" when I try to activate a datasource in BW. Any ideas on how to resolve this error?
Thanks.

I already tried that. This is what's happening.. When I get this error, if I try again it will activate and gets collected into a transport. I moved this transport to our QA system. As soon as I try to execute an infopackage under this datasource in QA, I get the error datasource xxxxx must be activated. Before the excecution of the infopackage, the datasource is in "Active version executable". After I get the error message "datasource must be activated", the datasource in the QA system changes to "Active version not executable". I am not sure all these issues are related back to the "invalid call sequence" error I am getting when I try to activate the data source.
I also tried recollecting the transport from our Dev system to QA and it still gives the above errors.
Any help?
Thanks.

Invalid input syntax for type boolean???? ahhhhhh

Hey all,
Has anyone come accross the 'invalid input syntax for type boolean' error - its driving me crazy trying to figure out what is wrong with my function/java code!!!
The postgres (using 8.1) function is:
CREATE OR REPLACE FUNCTION selectstaffroles("varchar")
RETURNS refcursor AS
$BODY$
DECLARE
ResultSet refcursor;
whereClause ALIAS FOR $1;
BEGIN
OPEN ResultSet FOR
EXECUTE 'SELECT role.* FROM role left join staffrole on staffrole.roleid=role.roleid WHERE ' || whereClause;
RETURN Resultset;
END;
$BODY$
LANGUAGE 'plpgsql' VOLATILE;
WhereClause sent via java code =
c.colStaffRoleStaffID+"="+staff.getUserStaffID() -which basically is staffid=2
Once this query is executed via the java code i get the 'invalid input syntax for type boolean: "staffid=2" ' error. However if I type select selectstaffroles('staffid=2') using pgAdmin SQL window - no problems!
ANY HELP or suggestions will be greatly appreciated! - Thanks in advance!
Eli

Ahh soz - silly mistake which was corrected pretty much as soon as post was posted!
Solution:
Within another method the where clause sent to the database function was enclosed within quotes! Removing quotes = problem resolved!

ORA-28232: invalid input length for obfuscation toolkit

hi,
i am facing this error when i enterd more then 8 charecter in the input string.
ORA-28232: invalid input length for obfuscation toolkit
why i cant user more then 8 charecter for password.?

Rajnish Chauhan wrote:
hi,
i am facing this error when i enterd more then 8 charecter in the input string.
ORA-28232: invalid input length for obfuscation toolkit
why i cant user more then 8 charecter for password.?
28232, 0000, "invalid input length for obfuscation toolkit"
// *Cause: Length of data submitted for encryption or decryption is not a
// multiple of 8 bytes.
// *Action: Make sure that the length of the data to be encrypted or decrypted
// is a multiple of 8 bytes.since you did not share with us exactly what you did, we can say exactly what you did wrong.
How do I ask a question on the forums?
SQL and PL/SQL FAQ

Invalid input event for numeric control

Need to catch the event when invalid input being through out, customer doesn't like the notify.
George Zou
http://webspace.webring.com/people/og/gtoolbox

I haven't had a big problem with this, and I plan to continue to use numeric controls instead of making everything strings, but it does seem strange that CVI doesn't catch this. I like the automatic range checking options, the programmable increment/decrement buttons, and the ease of use.
You can use a quirk in CVI to catch this: if you enter an invalid number like 1.2.3 or 3...14159 or 1-2, CVI triggers EVENT_VAL_CHANGED, but leaves the original number unchanged. So you can create a case in the callback for the numeric control for EVENT_VAL_CHANGED, and in that case check to see if the value is the same as the previous value. If it is, assume an invalid input. EVENT_VAL_CHANGED does not get fired if you just press Enter without changing the value.
There are a couple of limitations or drawbacks to this approach. It doesn't save your invalid entry, so you have to enter the whole thing again instead of just correcting your mistake. EVENT_VAL_CHANGED also gets fired if you use Delete or Backspace, even if the number you end up with is the same as the previous. So this approach will flag that as an invalid entry.
See the attached example.
Attachments:
TestInvalidInput.zip ‏6 KB

Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service. Can anyone please
help me.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found

In my 2006 biztalk application I have exposed web service to receive SAP input. It was working fine. After I have modified something in orchestration in that application . I am getting following error while SAP try to consume my web service.
HI Arivazhagan K,
Could you give some explanation about what you modified? according the to error message, this is "resource is not found issue".
Best regards,
Angie
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Log Error : Invalid Input Parameter %s for every SAP B1 Client

Hi Everybody,
in my company we have performed SAP B1 upgrade from 2007A to 8.81 PL07, in two steps upgrading first to PL04.
Everything is working fine for all our clients, we are able to post and work normally with the system.
The only annoying problem is an error message coming up every minute for every client in the log:
SQLMessage Error I Technical Invalid input parameter: %s # # MID=-1 BOID=-1 BO= UserID=manager C:\Program Files (x86)\SAP\SAP Business One\SAP Business One.exe Version=8.81.315 Area= PID=1316 TID=4340 D:\depot\BUSMB_B1\8.8_SP1_REL\SBO\8.8_SP1_REL\Application\__Engines\DBM\__DBMC_DataBase.cpp 9547
I couldn't find anything regarding this topic in the forum, only one similar post but unanswered.
We are using two server: one for the licence server and one for the database (the database server is clustered)
Does anyone have any idea about this? Has it ever happened to anybody?
Thanks for your help

Hi Julie,
it must be a triggered action from the system. The only problem is that log files grow very big, few mb every day, and it is a situation that's not very ideal. And also i don't want to turn them off because it is always a good resource for other errors.
It is very strange that SAP hasn't noticed this behaviour and there isn't any note available for the purpose.
Thanks for your help

Mapping input values for a web service connection to a range of cells

I've created a web service connection in Xcelsius data manager. My web service requires an array of integer as input parameter. How do I map input values for a web service connection to read from a range of cells in the spreadsheet, e.g. $A$2:$A$20, in similar way of mapping output values to write to a range of cells in the spreadsheet?
For output values of the web service, I can specify to map the output values to write to a range of cells. However, it doesn't seem to work for reading the input values.
I can map input values for each node to a single cell, e.g. $A$2, in the spreadsheet. However, when I set the "Read From" field to a range of cells, e.g. $A$2:$A$20, it only reads in the first value in the range.
Is there any way that we can do this mapping for input values as we do for output values?
Your assistance is very much appreciated.
Regards,
Van

Van,
There is a workaround for that...
Example:
My Webservice accepts input data range in a specific format with " :" symbol, i.e. 072008:082008
Now what i do is
A1 = 072008
A2 = 082008
A3 = CONCATENATE(A1,":",A2)
so A3 = 072008:082008
Now i map the input value in web service to cell A3
P.S have 2 input box components and map it to cells A1 and A2, i.e you are giving users an option to enter the range of values...then web service will capture the range and refreshes data with the range of values user entered.
hope this helps..
-Anil

How to make a form for input in web interface builder

Hi expert:
How to make a form for input in web interface builder?I have already used it to do PS planning, but I don't know how to draw lines and checkboxes . Thanks in advance.
Allen

WAD:
Open the WAD and create a new template. On the left hand navigation you will have several Web Items available. Under 'Standard' you have 'Analysis' item. Pull that into your template to the right. Under the Properties tab you need to pick the query [form/layout] that you have built in Query Designer.
You will also find other items such as Button group, Checkbox, drop down, list box etc available. Pick and drag into the template whatever it is you require. Lets say you want a button. Under the Properties tab select the 'Command' that you require. You could use standard commands that are available there. You could also define functions and commands that you require.
Query Designer:
Open the QD and drag the characteristics and key figures that you require into the rows and columns of the QD. You would need to specify restrictions under the Filter tab of the QD based on the granularity of data that you require. You would need to remember that the key figures need to be made Input Ready [do this by clicking on KF and on the planning tab select "change by user and planning functions"].
This shouldgive you a start. After you've explored it yourself a bit we can discuss further and I can certainly provide you additional details/material on these areas.
Srikant

If I buy Microsoft office for MacBook pro will I be able to use diacritical marks for Welsh input? Welsh requires a circumflex sometimes on a,e,i,o,w and y, in addition to a diaeresis. An acute accents are not a problem as they occur in other languages.

If I buy Microsoft office for MacBook pro will I be able to use diacritical marks for Welsh input? Welsh requires a circumflex sometimes on a,e,i,o,w and y, in addition to a diaeresis. An acute accents are not a problem as they occur in other languages.

You can add in System Preferences, Language & Text, Input Sources, Welsh keyboard

Error ''No batch input data for screen SAPMF05A 0701'' with interface

Hi,
While I ran an interface from our legacy (vendor invoice), this message appeared in AL11 ''No batch input data for screen SAPMF05A 0701'' I saw in the pass ''No batch input data for screen SAPMF05A 0700'' but never 0701. I'm not able to find a lot of documentation that help me. Does anyone know what can cause this?

HI,
You can check by yourself the reason of the error in the following way,
related to note 26050.
Please check all the 3 points and furthermore please follow the
third that says:
1. Call up Transaction FBV0 and branch to the list.
2. Select the parked document in which the termination occurs, and
     create a batch input session via 'Edit -> Create batch input'. Then
     process the batch input session in the foreground.
Processing the batch input in foreground, You will be able to find out
the reason of the error message You have.
So, please call transaction FBV0   > Push the button "Document list"   >
Execute then choose the document You want to post and push the button
"Create batch input"    > When the batch input session is created, go
to transaction SM35 and run it in foreground in order to find out
the problem.
Kind Regards,
Fernando Evangelista

Input signal out of range with HDMI to VGA adapter LE1901w

Hi!
Recently I acquired an LE1901w monitor to use as second screen. I'm trying to connect it to my Toshiba u925 using an HDMI to VGA adapter (because neither the monitor has a HDMI port nor the notebook has a VGA output).
I'm getting the message "input signal out of range" asking to change to 1440x920 @ 60Hz and it keeps showing until the monitor goes to sleep even when I change the settings as per requested.
I have an integrated Intel HD Graphics 4000 and i'm using the default Windows monitor drivers for Windows 8.1
Any comment will be helpful
Thanks
This question was solved.
View Solution.

Hello @fbinim,
I understand that you are getting the message "Input Signal Out Of Range" and it is asking you to change to 1440x920 @ 60 Hz. I suspect this is a driver issue and you will need to ensure that your drivers are up to date on your computer. Just to be sure I would recommend if you could to move the HP LE1901W monitor to another computer and ensure that you do not have the problem there. If you do have it on another computer The issue you are experiencing appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

EROR: java.io.IOException: invalid content type for SOAP: TEXT/HTML

hi group,
my problem is related to scenario HTML to WebService in which im trying to send a request to a free webservice on internet and retrieving the response back and showing it in my html page.
scenario in detail:
i have a html page deployed on my tomcat server at my local m/c. in which im taking a email string and sending it to webservice which checks whether the email string has a valid email format or not and in response, webservice returns a boolean true/false depending on the email string. i want to show this boolean result n my html page.i have configured HTTP adaptor and SOAP adaptor for this and interfaces are scynchronus.
im able to send my request to webservice and getting the response also...i checked in trace..it shows message request sent and response recieved...here is the trace..
http://hcl3sap:50000/MessagingSystem/receive/AFW/XI</Trace>
<Trace level="3" type="T">User = PIISUSER</Trace>
<Trace level="3" type="T">Cached =</Trace>
<Trace level="3" type="T">Creating HTTP-client</Trace>
<Trace level="3" type="T">HTTP-client: creation finished</Trace>
<Trace level="3" type="T">Security: Basic authentication</Trace>
<Trace level="3" type="T">Serializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: sending http-request...</Trace>
<Trace level="3" type="T">HTTP-client: request sent</Trace>
<Trace level="3" type="T">HTTP-client: Receiving http-response...</Trace>
<Trace level="3" type="T">HTTP-client: response received</Trace>
<Trace level="3" type="T">HTTP-client: checking status code...</Trace>
<Trace level="3" type="T">HTTP-client: status code = 200</Trace>
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="T">HTTP-client: closing...</Trace>
</Trace>
but i get an error java.io.IOException: invalid content type for SOAP: TEXT/HTML after that,
Does anyone know where im going wrong....
regrds

you are very correct..i used SOAP reciever as http://www.webservicex.net/ValidateEmail.asmx?wsdl and SOAP Action as http://www.webservicex.net/IsValidEmail but getting the same error.
and if you look in the trace above it says that my request actually went to webservice and got a response also (response code 200) but i think after recieving the message from webservice something is wrong. either mapping is not correct...(but i tested that ..it works fine) or could be my company firewall is prohibiting the message sent by webservice to XI server (i have given proxy settings with password also)...im NOT sure on this ....
second thing i noticed in moni while examining the trace was....message payload under "Message Branch According to Receiver List " shows this value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns1:IsValidEmail xmlns:ns1="http://www.webservicex.net">
<ns1:Email>samWhgf.com</ns1:Email>
</ns1:IsValidEmail>
and then in just next step "Request Message Mapping" payload is
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:IsValidEmail xmlns:ns1="http://www.webservicex.net" />
i dont know really why payload is getting appended and if it is correct or not? but after this step further payload goes in this appended format only till call adaptor...if this is so i assume my message is going to webservice as
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:IsValidEmail xmlns:ns1="http://www.webservicex.net" />
which is not the proper format to be recieved by the webservice without any input value i.e "samWhgf.com"
im confused on this ..whether this is the route cause or any other...i have been trying to figure out the root cause from some days but still unsuccessful.
please provide ur valuable inputs.
regrds
Sameer

Invalid content type for SOAP: TEXT/PLAIN; HTTP 200 OK

Hi,
I am working on RFC - XI - WebService scenario. tested web service with soapUI and works fine. but while configured in XI getting below error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: invalid content type for SOAP: TEXT/PLAIN; HTTP 200 OK</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks,
Mahesh

Hi Stefan,
Imported webservice in external definition and the web service has 3 messages in it.
1. header
2. requestdoc
3. response.
while creating message interface, i can select only one input message (here i have to pass values for both Header & request doc). if i create 2 separate message interfaces one for header & one for requestdoc, how can i add both of them as target messages in meesage mapping? it gives me error if i add multiple target messages because the mode is synchronous.
How do we map when we have multiple messages (header & request) in a web service?
I created a new message type with header & requestdoc in it, and used in mapping. Do you think the above problem is occuring because of this?
My webservice structure looks like below.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
   <soapenv:Header>
      <soap:RequestHeader>
         <soap:variable1></soap:variable1>
         <soap:variable2></soap:variable2>
         <soap:variable3></soap:variable3>
      </soap:RequestHeader>
   </soapenv:Header>
   <soapenv:Body>
      <soap:SOAPRequest>
         <RequestDoc></RequestDoc>
      </soap:SOAPRequest>
   </soapenv:Body>
</soapenv:Envelope>
Thanks,
Mahesh

Unable to open JPG file, getting "unknown or invalid JPEG marker was found", help needed

Info:
MS Windows 7 Home Premium 64-bit SP1
Adobe Photoshop 64bit CS5 etxended (Version 12.0 x64)
So downloaded some JPG files from the web and trying to use some of them as wallpapers. I am able to open them in Windows viewer and some other prgrams but they are the wrong size for my screen so I wanted to change the resolution and opened them into CS5 and sound that some of them would not open. I am getting the following error "Could not complete your request because an unknown or invalid JPEG marker was found" and yet there does not seem to be anything I can do to resolve this to open them into CS5.
Any thoughts or advice?

Open them into another viewer, copy, then FIle-New in Photoshop and Paste.
Photoshop is picky and a file that does not properly follow the JPEG standards could cause this kind of problem. Other apps are sometimes more forgiving.
-Noel

Invalid input marker for interface range

Similar Messages

Maybe you are looking for