Invalid input settings
I'm recording multiple tracks of drums going into an Alesis XT20. Out of that I'm digitally into bank B of a MOTU 2408 audio interface. That is going firewire into the pci-424e card and into my G5Quad. I'm also monitoring thru the 2408 via a small mixer. After recording 8tracks of drums, I go back to the head of the song with the tracks still in record mode. When I press play, I get the error message "invalid input settings 10021" After pressing enter, one of the tracks pops out of record and the tracks play. THEN when I press stop, the same message arises. ?????????? Very annoying to have to pop out of record mode on my Mackie Universal Control just to monitor tracks. I've got the clock source set to Adat bank B?????
Part of my setup is identical to what you describe.
I've not seen that error
If you disarm recording on all tracks of the Alesis do you still get the warning?
Are you controlling the Alesis from inside Logic using MMC?
If so does disarming record in Logic stop the error.
I have always switch record arm off whenevre I playback, so if that is relevant I don't know.
Peter
ps technically spaking, to be pedantic, the connection is MOTU AUdio wire, not Firewire. The pdi card keeps the firewire bus free.
Similar Messages
-
dear all
I want a solution to my problem .
the problem is when ever i trying to use publish ios app i receive an invalid input massage
my p12 and cer files are good and thy work on windows copy of flash
now i am using mac copy (mac 10.7.1 )
i already updated my flash and this is the version no# 11.5.1.349
pls if anyone have solution i will appreciate the help.
Message was edited by: php sIf you have any knowledge of english you would read it and see 'invalid input' which means you settings aren't filled out properly to publish it.
You have filled it out but it sounds like one of the options you have to fill out isn't written properly.
Invalid input could be something like:
43545435...43.54frgr
Simply having characters it shouldn't have,
Check it over and if don't work reinstall flash. -
Migration Tool - Upsert Access Profile - Invalid input value
Folks,
I am migrating AccessProfiles and I'm trying to Upsert the Admin access profiles as it's a new deployment and I'm moving code from Staging to Production. I have successfully Upserted all new AccessProfiles but get this error for the Admin AccessProfiles:
Invalid input value 'CR' for 'CustObj1 Cmpltd Activity'(SBL-ODS-50843)
I already have the correct privileges, I have full access to the entity via Role Settings and I can even manually set the Permission for Custom Object 1 - Completed Activity as Create/Read. Anyone come across this? Is this a bug?
Thanks
Oli @ InnoveerHi,
Any ideas?
Invalid dimension error usually appears if there is no member or invalid chars etc in a member of the dimension.
The note 1661799 says , assigning a member in a data access profile and deleting that member causes this error. I checked this case, too. -
Log Error : Invalid Input Parameter %s for every SAP B1 Client
Hi Everybody,
in my company we have performed SAP B1 upgrade from 2007A to 8.81 PL07, in two steps upgrading first to PL04.
Everything is working fine for all our clients, we are able to post and work normally with the system.
The only annoying problem is an error message coming up every minute for every client in the log:
SQLMessage Error I Technical Invalid input parameter: %s # # MID=-1 BOID=-1 BO= UserID=manager C:\Program Files (x86)\SAP\SAP Business One\SAP Business One.exe Version=8.81.315 Area= PID=1316 TID=4340 D:\depot\BUSMB_B1\8.8_SP1_REL\SBO\8.8_SP1_REL\Application\__Engines\DBM\__DBMC_DataBase.cpp 9547
I couldn't find anything regarding this topic in the forum, only one similar post but unanswered.
We are using two server: one for the licence server and one for the database (the database server is clustered)
Does anyone have any idea about this? Has it ever happened to anybody?
Thanks for your helpHi Julie,
it must be a triggered action from the system. The only problem is that log files grow very big, few mb every day, and it is a situation that's not very ideal. And also i don't want to turn them off because it is always a good resource for other errors.
It is very strange that SAP hasn't noticed this behaviour and there isn't any note available for the purpose.
Thanks for your help -
Getting an error message in B2B and it says Invalid Delimiter Settings.
Hi,
We are in the process of integrating an outbound data flow using BPEL and B2B.. We have the bpel process deployed in the system which is integrated to the B2B via a partner link.
The payload from the Bpel process is coming into the B2B but the output edi file is not getting generated and we
are getting the error message when we run the Business Message Status reports/ Error Status Reports in B2B.
The correct Trading Partner Agreement is being hit and as well as the correct Business process and Document protocol and document revision are getting attached. It is also identifying the correct values for the Sender and Receiver from the Agreement.
But it is erroring out with the error message as Invalid Delimiter Settings... This is for the outbound edi transaction to the outside trading partner..
Could someone please help us with this issue as soon as possible.
Regards
sachin.Yes Ramesh,
The error is very implicitly ...you are right but from the setup perspective in b2b we have defined the below mentioned for the operational capability for the Trading Partner who is going to receive this edi document :
Component Element Separator 0x7d
Segment Delimiter 0x0a
Element Delimiter 0x2a
Subelement Delimiter 0x7d
But we are not able to understand why it is throwing invalid delimiter settings. I have provided the b2b.log as well mentioned below..
2008.11.10 at 17:30:27:858: Thread-14: B2B - (DEBUG) iAudit report :
Error Brief :
5097: Invalid delimiter settings.
iAudit Report :
<?xml version="1.0" encoding="UTF-16"?><AnalyzerResults Guid="{844CC52C-77AF-DD11-A28B-006171130000}" InterchangeReceived="1" InterchangeProcessed="1" InterchangeAccepted="0"> <ExecutionDate>Monday, November 10, 2008</ExecutionDate> <ExecutionTime>05:30:27 PM (EST)</ExecutionTime> <AnalyzerReturn>Failed</AnalyzerReturn> <NumberOfErrors>1</NumberOfErrors> <ErrorByCategory> <Category Name="Rejecting"> <Severity Name="Normal">1</Severity> </Category> </ErrorByCategory> <Status>Finished</Status> <DataFile> <FilePath/> <FileName/> <LastModified/> <FileSize/> <DataURL>file://</DataURL> </DataFile> <Interchange Guid="{2AC4C52C-77AF-DD11-A28B-006171130000}" InterchangeAckCode="R" FunctionalGroupReceived="1" FunctionalGroupProcessed="1" FunctionalGroupAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>0</StartPos> <Size>5690</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="InterchangeSenderQual">01</Link> <Link Name="InterchangeSenderID">195080304</Link> <Link Name="InterchangeReceiverQual">ZZ</Link> <Link Name="InterchangeReceiverID">RBTWTEST</Link> <Link Name="InterchangeControlVersion">00401</Link> </Links> <Properties> <Property Name="Standard">X12</Property> <Property Name="SegmentDelimiter">0xa</Property> <Property Name="ElementDelimiter">0x2a</Property> <Property Name="SubelementDelimiter">0x7d</Property> <Property Name="RepeatingSeparator"/> <Property Name="ReplacementChar">0x7c</Property> </Properties> </NodeInfo> <FunctionalGroup Guid="{84FBC52C-77AF-DD11-A28B-006171130000}" FunctionalGroupAckCode="R" TransactionSetsIncluded="0" TransactionSetsReceived="1" TransactionSetsProcessed="1" TransactionSetsAccepted="0" RError="0" NError="0" OtherWI="0"> <DataXPointer> <StartPos>0</StartPos> <Size>5690</Size> </DataXPointer> <NodeInfo> <Links> <Link Name="GroupSenderID">195080304</Link> <Link Name="GroupReceiverID">RBTWTEST</Link> <Link Name="GroupVersionNumber">004010</Link> </Links> <Properties> <Property Name="GroupID">SM</Property> </Properties> </NodeInfo> <Transaction Guid="{38333539-3935-3230-3330-343333373930}" TransactionAckCode="R" RError="1" NError="0" OtherWI="0"> <DataXPointer> <StartPos>0</StartPos> <Size>5690</Size> </DataXPointer> <GuidelineInfo> <GuidelineFile> <FilePath>ByteStream</FilePath> <FileName>ByteStream</FileName> <LastModified/> <FileSize/> <GuidelineURL>file://ByteStream</GuidelineURL> </GuidelineFile> <DetailGuidelineInfo> <IID>4</IID> <ID>204</ID> <Name>MOTOR CARRIER LOAD TENDER</Name> <GroupID>SM</GroupID> <Standard>X12</Standard> <StdVersion>V4010</StdVersion> </DetailGuidelineInfo> </GuidelineInfo> <NodeInfo> <Links> <Link Name="TransactionID">204</Link> </Links> <Properties> <Property Name="TransactionControlNumber"/> </Properties> </NodeInfo> <TransactionErrors> <Error ErrorCode="{9795C1E4-8860-4F09-B226-1B153FDDD517}" Severity="Normal" Category="Rejecting" Index="1" ID="50970000"> <ErrorBrief>5097: Invalid delimiter settings.</ErrorBrief> <ErrorMsg>Invalid delimiters settings.</ErrorMsg> <ErrorObjectInfo> <Parameter Name="ErrorLevel">0</Parameter> <Parameter Name="Name">XData2Native</Parameter> <Parameter Name="_ec_dn_guid_">{38333539-3935-3230-3330-343333373930}</Parameter> <Parameter Name="_ec_index">0</Parameter> <Parameter Name="ec_error_scope">Transaction</Parameter> </ErrorObjectInfo> <ErrorDataInfo> <Part1/> <ErrData/> <Part3/> <DataXPointer> <StartPos>0</StartPos> <Size>0</Size> </DataXPointer> </ErrorDataInfo> </Error> </TransactionErrors> </Transaction> </FunctionalGroup> </Interchange></AnalyzerResults>
2008.11.10 at 17:30:27:859: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sErrorGuid = {9795C1E4-8860-4F09-B226-1B153FDDD517}
2008.11.10 at 17:30:27:859: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sDescription = Invalid delimiters settings.
2008.11.10 at 17:30:27:859: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sBrDescription = 5097: Invalid delimiter settings.
2008.11.10 at 17:30:27:859: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = ErrorLevel sParameterValue = 0
2008.11.10 at 17:30:27:859: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = Name sParameterValue = XData2Native
2008.11.10 at 17:30:27:859: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = ecdn_guid_ sParameterValue = {38333539-3935-3230-3330-343333373930}
2008.11.10 at 17:30:27:859: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = ecindex sParameterValue = 0
2008.11.10 at 17:30:27:859: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument sParameterName = ec_error_scope sParameterValue = Transaction
2008.11.10 at 17:30:27:859: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument added Hash Key = {38333539-3935-3230-3330-343333373930}
2008.11.10 at 17:30:27:859: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processOutgoingDocument batch Position = 0
2008.11.10 at 17:30:27:860: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2199)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1570)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:931)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1092)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:698)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:375)
at java.lang.Thread.run(Thread.java:570)
2008.11.10 at 17:30:27:860: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2199)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1570)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:931)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1092)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:698)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:375)
at java.lang.Thread.run(Thread.java:570)
2008.11.10 at 17:30:27:861: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2253)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1570)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:931)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1092)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:698)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:375)
at java.lang.Thread.run(Thread.java:570)
2008.11.10 at 17:30:27:861: Thread-14: B2B - (ERROR) Error -: AIP-51505: General Validation Error: Error -: AIP-51505: General Validation Error
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2253)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1570)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:931)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1092)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:698)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:375)
at java.lang.Thread.run(Thread.java:570)
Caused by: Error -: AIP-51505: General Validation Error
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processOutgoingDocument(EDIDocumentPlugin.java:2199)
... 6 more
2008.11.10 at 17:30:27:861: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage B2BDomainException
2008.11.10 at 17:30:27:861: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Error Message: Error -: AIP-51505: General Validation Error
2008.11.10 at 17:30:27:862: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2008.11.10 at 17:30:27:862: Thread-14: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
2008.11.10 at 17:30:27:862: Thread-14: BusinessLogicLayer - (DEBUG) Push Stack: queryBusinessMessage
2008.11.10 at 17:30:27:863: Thread-14: BusinessLogicLayer - (DEBUG) Pop Stack: queryBusinessMessage
2008.11.10 at 17:30:27:863: Thread-14: B2B - (DEBUG) AccessRepo:findBusinessMessageByB2BMessageId Found Successfull message with B2bMessageId : 35303237393132363736323038313233 and ProtocolMessageId 35303237393132363736323038313233
2008.11.10 at 17:30:27:863: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message not found.
2008.11.10 at 17:30:27:863: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2008.11.10 at 17:30:27:864: Thread-14: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
2008.11.10 at 17:30:27:864: Thread-14: BusinessLogicLayer - (DEBUG) Push Stack: updateBusinessMessage
2008.11.10 at 17:30:27:866: Thread-14: BusinessLogicLayer - (DEBUG) Pop Stack: updateBusinessMessage
2008.11.10 at 17:30:27:866: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2008.11.10 at 17:30:27:866: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updating Native Event Tbl Row
2008.11.10 at 17:30:27:866: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2008.11.10 at 17:30:27:866: Thread-14: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
2008.11.10 at 17:30:27:866: Thread-14: BusinessLogicLayer - (DEBUG) Push Stack: queryBusinessMessage
2008.11.10 at 17:30:27:867: Thread-14: BusinessLogicLayer - (DEBUG) Pop Stack: queryBusinessMessage
2008.11.10 at 17:30:27:867: Thread-14: B2B - (DEBUG) AccessRepo:findBusinessMessageByB2BMessageId Found Successfull message with B2bMessageId : 35303237393132363736323038313233 and ProtocolMessageId 35303237393132363736323038313233
2008.11.10 at 17:30:27:867: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg wiremsg not found
2008.11.10 at 17:30:27:867: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException notifying App
2008.11.10 at 17:30:27:867: Thread-14: B2B - (DEBUG) Engine:notifyApp Enter
2008.11.10 at 17:30:27:868: Thread-14: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = 5B5E3017CBA4D092E043CD91053CD092
2008.11.10 at 17:30:27:869: Thread-14: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>35303237393132363736323038313233</correlationId>
<b2bMessageId>35303237393132363736323038313233</b2bMessageId>
<errorCode>AIP-51505</errorCode>
<errorText>5097: Invalid delimiter settings.</errorText>
<errorDescription>
<![CDATA[Machine Info: (ios5801e)
Invalid delimiters settings. ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.11.10 at 17:30:27:869: Thread-14: B2B - (DEBUG) AQJMSCorrelationID = 5B5E3017CBA4D092E043CD91053CD092
2008.11.10 at 17:30:27:882: Thread-14: B2B - (DEBUG) Engine:notifyApp Exit
2008.11.10 at 17:30:27:882: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: AIP-51505: General Validation Error
2008.11.10 at 17:30:27:882: Thread-14: B2B - (DEBUG) DBContext commit: Enter
2008.11.10 at 17:30:27:895: Thread-14: B2B - (DEBUG) DBContext commit: Transaction.commit()
2008.11.10 at 17:30:27:895: Thread-14: B2B - (DEBUG) DBContext commit: Leave
2008.11.10 at 17:30:27:895: Thread-14: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
2008.11.10 at 17:30:47:300: B2BStarter thread: Deployment - (DEBUG) Query Configurations null Lifecycle status Active exclude design true
2008.11.10 at 17:30:47:300: B2BStarter thread: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2008.11.10 at 17:30:47:300: B2BStarter thread: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2008.11.10 at 17:30:47:302: B2BStarter thread: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
2008.11.10 at 17:30:47:302: B2BStarter thread: Deployment - (DEBUG) Query Configurations null Lifecycle status Quiescing exclude design true
2008.11.10 at 17:30:47:302: B2BStarter thread: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2008.11.10 at 17:30:47:302: B2BStarter thread: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2008.11.10 at 17:30:47:302: B2BStarter thread: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
2008.11.10 at 17:31:17:303: B2BStarter thread: Deployment - (DEBUG) Query Configurations null Lifecycle status Active exclude design true
2008.11.10 at 17:31:17:303: B2BStarter thread: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2008.11.10 at 17:31:17:303: B2BStarter thread: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2008.11.10 at 17:31:17:305: B2BStarter thread: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
2008.11.10 at 17:31:17:305: B2BStarter thread: Deployment - (DEBUG) Query Configurations null Lifecycle status Quiescing exclude design true
2008.11.10 at 17:31:17:305: B2BStarter thread: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2008.11.10 at 17:31:17:305: B2BStarter thread: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2008.11.10 at 17:31:17:306: B2BStarter thread: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
2008.11.10 at 17:31:47:307: B2BStarter thread: Deployment - (DEBUG) Query Configurations null Lifecycle status Active exclude design true
2008.11.10 at 17:31:47:307: B2BStarter thread: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2008.11.10 at 17:31:47:308: B2BStarter thread: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2008.11.10 at 17:31:47:318: B2BStarter thread: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
2008.11.10 at 17:31:47:318: B2BStarter thread: Deployment - (DEBUG) Query Configurations null Lifecycle status Quiescing exclude design true
2008.11.10 at 17:31:47:318: B2BStarter thread: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2008.11.10 at 17:31:47:318: B2BStarter thread: BusinessLogicLayer - (DEBUG) Push Stack: queryConfiguration
2008.11.10 at 17:31:47:318: B2BStarter thread: BusinessLogicLayer - (DEBUG) Pop Stack: queryConfiguration
Could you please review this once..
thanks
sachin. -
iv been using the same code to make input forms ever since i
started but im having this recurring problem with one form. when
people fill in the form when they hit send, sometimes it sends and
other times it goes to a blank screen which says "invalid
input!".there is a line at the top of the php code which mentions
this and then refers to $field for which there is nothing in the
form called this.is that the problem? why would it only work
sometimes?
the line of code is this:
<?
function checkOK($field)
if (eregi("\r",$field) || eregi("\n",$field)){
die("Invalid Input!");
the code for the page can be found here:
http://www.mathminds.co.uk/tutor_application_form.html
thanks.Greetings,
It appears that you are checking for carrige returns or newlines in the form fields.
Then calling die(); if one or the other is found.
Why not do some form validation to sanitize the input from your form fields correctly.
HTH
-Rb -
Invalid input marker for interface range
I am trying to create a voice lab, I have a 1700 series cisco router and a 3500lx switch. I have configure the vlans,and trunked fa0/0 on router and fa0/1 on switch, i and unable to create a interface range fastethernet fa0/2 - 24. I get a invalid input marker it will not take any command with range in it. I can see all the ports
Duplicate post, please post here -
https://supportforums.cisco.com/thread/2262085?tstart=0
Jon -
Hi people
I install the flash cs5.5 today.
And my app make a error all time in the publishing
Adobe Flash Professional
Invalid Input.
Compilation failed while executing: strip
Any one???
Please help
tanksI issue
I create another file and copy all files to new file.
Works
tanks all -
Invalid input syntax for type boolean???? ahhhhhh
Hey all,
Has anyone come accross the 'invalid input syntax for type boolean' error - its driving me crazy trying to figure out what is wrong with my function/java code!!!
The postgres (using 8.1) function is:
CREATE OR REPLACE FUNCTION selectstaffroles("varchar")
RETURNS refcursor AS
$BODY$
DECLARE
ResultSet refcursor;
whereClause ALIAS FOR $1;
BEGIN
OPEN ResultSet FOR
EXECUTE 'SELECT role.* FROM role left join staffrole on staffrole.roleid=role.roleid WHERE ' || whereClause;
RETURN Resultset;
END;
$BODY$
LANGUAGE 'plpgsql' VOLATILE;
WhereClause sent via java code =
c.colStaffRoleStaffID+"="+staff.getUserStaffID() -which basically is staffid=2
Once this query is executed via the java code i get the 'invalid input syntax for type boolean: "staffid=2" ' error. However if I type select selectstaffroles('staffid=2') using pgAdmin SQL window - no problems!
ANY HELP or suggestions will be greatly appreciated! - Thanks in advance!
EliAhh soz - silly mistake which was corrected pretty much as soon as post was posted!
Solution:
Within another method the where clause sent to the database function was enclosed within quotes! Removing quotes = problem resolved! -
Invalid input event for numeric control
Need to catch the event when invalid input being through out, customer doesn't like the notify.
George Zou
http://webspace.webring.com/people/og/gtoolboxI haven't had a big problem with this, and I plan to continue to use numeric controls instead of making everything strings, but it does seem strange that CVI doesn't catch this. I like the automatic range checking options, the programmable increment/decrement buttons, and the ease of use.
You can use a quirk in CVI to catch this: if you enter an invalid number like 1.2.3 or 3...14159 or 1-2, CVI triggers EVENT_VAL_CHANGED, but leaves the original number unchanged. So you can create a case in the callback for the numeric control for EVENT_VAL_CHANGED, and in that case check to see if the value is the same as the previous value. If it is, assume an invalid input. EVENT_VAL_CHANGED does not get fired if you just press Enter without changing the value.
There are a couple of limitations or drawbacks to this approach. It doesn't save your invalid entry, so you have to enter the whole thing again instead of just correcting your mistake. EVENT_VAL_CHANGED also gets fired if you use Delete or Backspace, even if the number you end up with is the same as the previous. So this approach will flag that as an invalid entry.
See the attached example.
Attachments:
TestInvalidInput.zip 6 KB -
Invalid Input Error When Compiling in CS5
I am porting and AIR for Android app over to iPhone, but when I try to compile I get the following error:
Invalid Input
Invalid Input swf. Error executing : /Applications/Adobe Flash CS5/PFI/aot/lib/go.jar
Has any one else seen this? Do you know how to fix it?
Thanks.You need to update Flash CS5 under Help > Updates.
I had the same problem. I thought Flash was up to date because the Adobe Updater pops up regularly. The Adobe Updater is just for CS4 apps, so you won't get the updates you need for CS5.
~Victoria~ -
Simple Form Problem: Cant press Enter in form without getting error message: Invalid Input
The problem is very simple,
I have several forms on my site such as the 'quick enquiry'
form on the home page about half way down.
http://www.party-invitation.co.uk/index.htm
The user enters name- Works Fine
user enters email address- Works Fine
User enters a question- This is were the problem occurs when
the users presses the Enter key. This seems to bring up a message
that says Invalid Input.
Does anyone know how i can allow people to use the Enter key
in my forms to skip lines without causing this error message?
Any help would be appreciated.
Feel free to use the form to test it out.
Thanks.
Here is my php code for the form.
<?
function checkOK($field)
if (eregi("\r",$field) || eregi("\n",$field)){
die("Invalid Input!");
$Name=$_POST['Name'];
checkOK($Name);
$Email=$_POST['Email'];
checkOK($Email);
$Question=$_POST['Question'];
checkOK($Question);
$to="[email protected]";
$message="
A Quick Enquiry has been submitted from
www.Party-Invitation.co.uk
Here are the details:
Name: $Name
Email: $Email
Question: $Question
if(mail($to,"Quick Enquiry: $Email $Name" ,$message,"From:
$email\n")) {
echo "";
} else {
echo; "There was a problem sending the mail. Please check
that you filled in the form correctly.";
?>.oO(stuckinthesystem)
> Here is my php code for the form.
> <?
This should be <?php for portability reasons. Short open
tags are an
optional feature and can be disabled.
> function checkOK($field)
> {
> if (eregi("\r",$field) || eregi("\n",$field)){
The old ereg_* functions should not be used anymore. Better
would be
something like
if (preg_match("/[\n\r]/", $field)) {...}
> $Name=$_POST['Name'];
> checkOK($Name);
> $Email=$_POST['Email'];
> checkOK($Email);
> $Question=$_POST['Question'];
> checkOK($Question);
The last check causes the error if the user enters multiple
lines in the
text area. You can remove that check, because line breaks in
the email
body are safe.
> if(mail($to,"Quick Enquiry: $Email $Name"
,$message,"From: $email\n")) {
> echo "";
There's a typo in the last parameter. Variable names in PHP
are
case-sensitive, so $Email != $email. You should set
error_reporting to
E_ALL in your php.ini, so PHP will let you know about such
errors.
Micha -
Why my program does not loop back during invalid input?
boolean invalidNum = false;
//Questionnaire Number
do {
System.out.print("Enter Questionnaire Number [ ] ");
try
inputQuestionnAireNum = Integer.parseInt(input.nextLine());
if(inputQuestionnAireNum <0 || inputQuestionnAireNum>100){
System.out.print("Invalid: please enter between 1 to 100 \n");
} else {
invalidNum = true;
catch (NumberFormatException e)
System.out.print("Invalid try again \n");
} while (!invalidNum);
//Age input
do {
System.out.print("Enter Age [ ] ");
try
inputQuestionnAireNum = Integer.parseInt(input.nextLine());
if(inputAge <0 || inputAge>100){
System.out.print("Invalid: please enter between 1 to 100 \n");
} else {
invalidNum = true;
catch (NumberFormatException e)
System.out.print("Invalid try again \n");
} while (!invalidNum);
//Postal code
System.out.print("Enter Postal Code [ ] ");
inputPostCode = Integer.parseInt(input.nextLine());Result:
1 new entry or 0 print1
Enter Questionnaire Number [ ] w
Invalid try again
Enter Questionnaire Number [ ] 33
Enter Age [ ] w
Invalid try again
Enter Postal Code [ ]
why age input does not loop back and prompt for re-enter during invalid input ? instead it proceed to print the next line.Apparently because you don't reset "invalidNum" after the first loop.
Your code would be a lot easier to read if you didn't use the word "invalid" to mean "valid". -
ORA-28232: invalid input length for obfuscation toolkit
hi,
i am facing this error when i enterd more then 8 charecter in the input string.
ORA-28232: invalid input length for obfuscation toolkit
why i cant user more then 8 charecter for password.?Rajnish Chauhan wrote:
hi,
i am facing this error when i enterd more then 8 charecter in the input string.
ORA-28232: invalid input length for obfuscation toolkit
why i cant user more then 8 charecter for password.?
28232, 0000, "invalid input length for obfuscation toolkit"
// *Cause: Length of data submitted for encryption or decryption is not a
// multiple of 8 bytes.
// *Action: Make sure that the length of the data to be encrypted or decrypted
// is a multiple of 8 bytes.since you did not share with us exactly what you did, we can say exactly what you did wrong.
How do I ask a question on the forums?
SQL and PL/SQL FAQ -
Its Not possible to make any payment by Credit Card. After filling in the Data Form and continuing to finish the payment an error window appears Witz the Text " invalid Input Data. No javascript allow..." Orher Browsers are working well.
How can i fix this ProblemIts Not possible to make any payment by Credit Card. After filling in the Data Form and continuing to finish the payment an error window appears Witz the Text " invalid Input Data. No javascript allow..." Orher Browsers are working well.
How can i fix this Problem
Maybe you are looking for
-
Why are some websites displayed with added question marks inside black diamonds
Numbers are displayed with question marks inside black triangles before and following, possibly as column separators. == This happened == Every time Firefox opened == I attempted to access financial websites
-
PhotoShop Cs5 to Cs3 Brush issue
Hello. Previously I was using PhotoShop CS5 for my personal art design, however i had to switch back to CS3 for various reasons. Having devoted a lot of time and care into my CS5, I saved up my swatches, styles, brushes, etc..... so I wouldn't lose a
-
Movement type reflect to GL account
Hi All, Where should I go to know what movement type mapping to what account that will be reflected? Thanks.
-
Acrobat Distiller, Excel, Adding a reference in VBA
I have a snippet of VBA to generate a PDF through Excel. I expected to see "Acrobat Distiller" in the references under the menu option Tools/References in the Visual Basic editor. It's not there. Can anyone help?
-
Photoshop cc not opening even though i installed it..!! plz leave a reply
i installed adobe photoshop cc 2013, but when i try to open its not opening.. it says adobe photoshop cannot run on this computer because this version of photoshop requires windows 7 or later.. please reply quickly...