Invalid JPEG marker type is found
I use a very old version of Photoshop (Adobe PS CS Version 8) for digital scrapbooking. I store all of my files on an EHD because I have thousands, and I don't want to slow down my computer's performance. It had been hooked up to my desktop, but I recently started attaching it to my MacBook. When I hooked it up, I had to update my iPhoto libraries to work with my MacBook's version of iPhoto ('11). So I did. Now when I try to open my files, I get the error message that an invalid JPEG marker type is found. Most of the files, aren't even jpegs, they are pngs or psds.
Any ideas? Can I undo what I've done? I'm talking THOUSANDS of files!
Thanks for any/all of your help!
-J
Either you have the wrong file extension on the files, or your files are corrupt and won't be readable.
Similar Messages
-
Could not complete your request because an unknown or invalid JPEG marker type is found
The above messagecomes up on a lot of my photoshop files that have been recovered from a damaged disk - can this be fixed?
Thanks, Phil.That's a pretty good indication that the data inside the files is corrupted.
You *might* be able to get some of the image back by opening it in different tools that can open JPEGs. But very likely none will be able to recover all the image data perfectly.
Check Irfan View as a viewer with some resiliency for opening corrupted files.
-Noel -
Invalid JPEG marker type?
I am a novice user of Photoshop and am using Photoshop CS6. When I adjust and crop a photo and save it as as JPEG and then try to reopen it, Photoshop comes up with this message: 'Could not complete your request because an unknown or Invalid JPEG marker type is found". Could anyone help me fix this? Thank you
Hi niagara94,
Can you please share one of the problematic JPEG file. -
Software to repair JPEG marker type corruption ???
I have a couple of corrupted JPEG files and I am unable to open them due to 'invalid JPEG marker type'.
Is there an software for the Mac to fix that ?
Thanks, Tom
iMac G5 2.0/1.5GB/250 GB Mac OS X (10.4.3)Hi, Tom.
This Google Search turned up two suggestions:
1. Be sure the file has extension .jpg or .jpeg
2. Try opening the file in Graphic Converter, then performing a Save As. For Graphic Converter, click here.
There is no software that will fix corrupted files since there is no way of knowing what the file contained before it was corrupted.
If these files have been on your computer for some time, this is why one should implement and use a comprehensive "Backup and Recovery" solution.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Unable to open JPG file, getting "unknown or invalid JPEG marker was found", help needed
Info:
MS Windows 7 Home Premium 64-bit SP1
Adobe Photoshop 64bit CS5 etxended (Version 12.0 x64)
So downloaded some JPG files from the web and trying to use some of them as wallpapers. I am able to open them in Windows viewer and some other prgrams but they are the wrong size for my screen so I wanted to change the resolution and opened them into CS5 and sound that some of them would not open. I am getting the following error "Could not complete your request because an unknown or invalid JPEG marker was found" and yet there does not seem to be anything I can do to resolve this to open them into CS5.
Any thoughts or advice?Open them into another viewer, copy, then FIle-New in Photoshop and Paste.
Photoshop is picky and a file that does not properly follow the JPEG standards could cause this kind of problem. Other apps are sometimes more forgiving.
-Noel -
An unknown or invalid jpeg marker is found
"an unknown or invalid jpeg marker is found"
jpegs being corrupted when copied
Each one, in different folders, copied from my MacBookPro’s desk top, all rendered out as a full sized jpeg, 300dpi, but then when I transfer them onto another HD, they all render out as the correct MB size (12MB etc), but they are sized 256 x 171 in the Bridge Info panel and none will open in Preview or Bridge or Photoshop, “Could not complete your request as an unknown or invalid jpeg marker is found"
They worked fine originally. Other files etc work well on the HD. i do not use anything other than jpeg and the original RAW files so all extensions are correct.
ThanksYou are correct in that this particular message means your files are hosed.
Your external HD could be going south, or the connection may be faulty, check all cable ends, the computer ports, etc.
How are you "transferring" them? That's a term that gives me hives. -
My OS is windows 7. I right click on the icon of the invalid file, check the scroll down menu select" Get Info". but this heading is not there. I have read I need to change the extension to "psd"
inorder to open the file and resave it correctly JPEG. I have 18 photos out of 120 that are there but I can open. Error missage reads" Invalid JEPEG Marker"Use another program to open and save them like IrfanView or XnView. They may be genuinely damaged and unsalvagable, though...
Mylenium -
Yesterdat's saved photo won't open, getting unknown or invalid JPEG marker?
Why is yesterday's saved work file not openning? getting unknown or invalid JPEG marker
It sounds like the file thinks it is JPEG for some reason, and it's not really JPEG or has been corrupted.
You wouldn't get a JPEG error on a PSD file. -
What Is "Unknown or Invalid jpg marker"?
Some of my pictures have a rectangular blue icon with the letters PSE on them. Even though the file extenstion is jpg., I get and error message when trying to open them. I get a message that it is an unknown or invalide jpg marker type. I have tried re-naming the file, but that hasn't worked.
Thank youSometimes the JPG data gets corrupted just enough to choke PSE, although other programs can open the image OK.
Open the image in another program and save it from that other program to re-write the JPG data correctly.
Ken -
JAEHYLEE (R11i PA to AR) Invalid AR Transaction Type Passed 에러 처리
Purpose
Project에서 AR로 interface시에 Invalid AR Transaction Type Passed 라는 에러 타입에 대한 해결책을 제시 한다
Symptom
After running the PRC: Interface Invoices to Receivables process, you receive
the error message, Invalid AR Transaction Type Passed, on the Accounts
Receivable Transfer Exception Report.
Solution
PA Invoice와 Credit Memo에 대해서 음수가 가능하도록 any sign을 mark해주도록 한다
After running the PRC: Interface Invoices to Receivables process, you receive
the error message, Invalid AR Transaction Type Passed, on the Accounts
Receivable Transfer Exception Report.
Possible Solution:------------------
Ensure that the Creation Sign field is set to Any Sign for both PA Invoice
and PA Credit Memo transaction types as follows:
1. Sign on to the application using your Receivables Responsibility.
2. Navigate to Setup -> Transactions -> Transaction Types. (Form Name =
RAXSUCTT)
3. In the Name field, query PA Invoice.
4. In the Creation Sign field, select Any Sign from the drop down menu
and save your changes.
5. Place your cursor in the Name field and query Credit Memo.
6. In the Creation Sign field, select Any Sign from the drop down menu
and save your changes.
7. Rerun the PRC: Interface Invoices to Receivables process again..
Reference
Note 109839.1 Oracle Projects Billing Interface with Oracle Receivables
Troubleshooting GuidePlease post the details of the application release, database version and OS.
Please also post the parameters you pass to the API.
Thanks,
Hussein -
Custom marker types for Prelude?
What would be the way to add a custom marker type to Prelude, that could be used in addition to the default 6 marker types (subclip, comment, flash cue, weblink, chapter and speech)?
I would like to have an ability to add a set of properties with a specific in-out time boundary to clips. Looking into the CC Extension Builder and going through the Prelude API docs, but haven't found info on this yet.
Through this forum, I understand that one can define a custom metadata schema, but that seems to allow new metedata for the entire clip, without the in-out time. I also see that Prelude provides an UI to define marker templates, but it seems like templates would be based on existing marker types, thus I cannot add new property set(s) there.Hi Lei,
I've put together a simple proof-of-concept build, and I have a bunch of questions(again). May I ask you to take a look at the build here and share your insight when convenient? Please let me know if there's a better place to do this than this forum.
In general, it is great that custom markers and their base properties can be viewed alongside the standard markers. I think it makes sense that our extension is responsible for providing UI for creating and editing the details of these markers. I'm wondering how I can improve the integration of our markers into the existing UI, meanwhile.
1) For the jsx run script error, is there a way to catch it as a caller, as opposed to displaying the alert dialog to the end user?
2) Documentation about the marker xml format in general? What is tagList?
3) Is there a way to create a new marker type button in the "Marker Type" panel without adding an actual marker to the timeline?
4) Any suggestion about better integrating with the Marker Type, Timeline and Marker Inspector panels in general? For example it'll be nice if we can set color for our markers, if our markers can be grouped in subcategory in the pull-down menu, etc...
5) Related to (2), it's not clear to me what the allowed characters are for xml. I'm seeing that newline and blackout characters seems to be a problem in xml for addMarker call. Is it intentional? I also saw that a single-quote goes through, but occasionally (not always) comes back as "apos;" in the xml for that event's callback, example below.
<key>cuePointParams</key>\n<prop.list>\n<key>object-caption</key>\n<string>As a failsafe, ark-brains were programmed to preserve Votan life by any means. In this case, that meant temporarily repairing the damage to Sukar caused by the Razor Rain storm. Unfortunately, some ark-brain fragments became damaged when they fell to Earth. These corrupted AIs built new bodies for themselves out of scrap machinery. You'll see them in the video game...they're called Scrappers.</string>
Thanks much,
Chihiro -
'An invalid public movie atom was found in the movie' Error Message
I was just tidying up all the music in iTunes and came across an album that half the songs are unplayable... I get no action with iTunes. I tried opening one of them with Quicktime and I get the following message:
An invalid public movie atom was found in the movie
I wonder if there might be a fix. I have the original CD at home but I am traveling and won't be back for a few months...
Thanks!I tried to play video clips on from lynda.com and the Q appears but only the audio plays.I am new to Mac and have no idea what to do. The same clips play on my windows pc just fine and that is version 7.3.
-
No SLD elements of type SAP_XIAdapterFramework found in PI 7.1
Hi Experts,
I am working on PI 7.1 system.
During configuration time while creating communication channel it gives error message as "No SLD elements of type SAP_XIAdapterFramework found".
Even I am not able to see Adapter Engine in RWB.
Any Clue?
Gaurav JainHi Gaurav,
In SLD You have to define all the systems and components. Under technical system in SLD , You should have entry for adapter Engine.I think that might be missing.
Hope this will help.
Vinod -
PLS-00330: invalid use of type name or subtype name
I am relatively new to Sql and am in the process of learning, so please bear with me. I am trying to create a trigger for the Invoices table that displays the vendor_name, invoice_number, and payment_total after the payment_total has been increased. I have discovered that I must use a compound trigger due to a mutating-table error and ended up with this:
CREATE OR REPLACE TRIGGER invoices_after_update_payment
FOR UPDATE OF payment_total
ON invoices
COMPOUND TRIGGER
TYPE invoice_numbers_table IS TABLE OF VARCHAR2(50);
TYPE payment_totals_table IS TABLE OF NUMBER;
TYPE vendor_names_table IS TABLE OF VARCHAR2(50);
TYPE summary_payments_table IS TABLE OF NUMBER INDEX BY VARCHAR2(50);
TYPE summary_names_table IS TABLE OF NUMBER INDEX BY VARCHAR2(50);
invoice_numbers invoice_numbers_table;
payment_totals payment_totals_table;
vendor_names vendor_names_table;
payment_summarys summary_payments_table;
name_summarys summary_names_table;
AFTER STATEMENT IS
invoice_number VARCHAR2(50);
payment_total NUMBER;
vendor_name VARCHAR2(50);
BEGIN
SELECT i.invoice_number, i.payment_total, v.vendor_name
BULK COLLECT INTO invoice_numbers, payment_totals, vendor_names
FROM invoices i JOIN vendors v
ON i.vendor_id = v.vendor_id
GROUP BY i.invoice_number;
FOR i IN 1..invoice_numbers.COUNT() LOOP
invoice_number := invoice_numbers(i);
payment_total := payment_totals(i);
vendor_name := vendor_names(i);
summary_payments_table(invoice_number) := payment_total;
summary_names_table(invoice_number) := vendor_name;
END LOOP;
END AFTER STATEMENT;
AFTER EACH ROW IS
temp_payment_total NUMBER;
vendor_name VARCHAR2(50);
BEGIN
temp_payment_total := payment_summarys(:new.invoice_number);
vendor_name := name_summarys(:new.invoice_number);
IF (:new.payment_total > temp_payment_total) THEN
DBMS_OUTPUT.PUT_LINE('Vendor Name: ' || vendor_name || ', Invoice Number: ' || :new.invoice_number || ', Payment Total: ' || :new.payment_total);
END IF;
END AFTER EACH ROW;
END;
/The code that I am using to update the table is:
UPDATE invoices
SET payment_total = 508
WHERE invoice_number = 'QP58872'At this point, I am getting an error report saying:
29/7 PLS-00330: invalid use of type name or subtype name
29/7 PL/SQL: Statement ignored
30/7 PLS-00330: invalid use of type name or subtype name
30/7 PL/SQL: Statement ignoredWhat does the error code entail? I have looked it up but can't seem to pin it. Any help would be greatly appreciated and I am open to any suggestions for improving my current code.
I am using Oracle Database 11g Express Edition on Windows 7. I am not sure if it is relevant, but I am also using Sql Developer. If you need any further information, I will do my best to provide what I can.
Thanks!
Edited by: 927811 on Apr 15, 2012 11:54 PM
Edited by: 927811 on Apr 15, 2012 11:56 PMI took your advice and removed the exception handling. There is no point in it being there. I also checked the timing points and you are correct. So, I changed my AFTER STATEMENT to BEFORE STATEMENT, which I had been thinking about doing anyways. It just seemed logical to me. That brings me to where I am now. I ran my update again and got back this error, It is the same as the one before, but for a different line (?)
Error starting at line 1 in command:
UPDATE invoices
SET payment_total = 510
WHERE invoice_number = 'QP58872'
Error report:
SQL Error: ORA-06502: PL/SQL: numeric or value error: character to number conversion error
ORA-06512: at "AP.INVOICES_AFTER_UPDATE_PAYMENT", line 30
ORA-04088: error during execution of trigger 'AP.INVOICES_AFTER_UPDATE_PAYMENT'
06502. 00000 - "PL/SQL: numeric or value error%s"
*Cause:
*Action:Also, to make sure you are clear as to what my code now looks like:
SET SERVEROUTPUT ON;
CREATE OR REPLACE TRIGGER invoices_after_update_payment
FOR UPDATE OF payment_total
ON invoices
COMPOUND TRIGGER
TYPE invoice_numbers_table IS TABLE OF VARCHAR2(50);
TYPE payment_totals_table IS TABLE OF NUMBER;
TYPE vendor_names_table IS TABLE OF VARCHAR2(50);
TYPE summary_payments_table IS TABLE OF NUMBER INDEX BY VARCHAR2(50);
TYPE summary_names_table IS TABLE OF NUMBER INDEX BY VARCHAR2(50);
invoice_numbers invoice_numbers_table;
payment_totals payment_totals_table;
vendor_names vendor_names_table;
payment_summarys summary_payments_table;
name_summarys summary_names_table;
BEFORE STATEMENT IS
invoice_number VARCHAR2(50);
payment_total NUMBER;
vendor_name VARCHAR2(50);
BEGIN
SELECT i.invoice_number, i.payment_total, v.vendor_name
BULK COLLECT INTO invoice_numbers, payment_totals, vendor_names
FROM invoices i JOIN vendors v
ON i.vendor_id = v.vendor_id
GROUP BY i.invoice_number, i.payment_total, v.vendor_name;
FOR i IN 1..invoice_numbers.COUNT() LOOP
invoice_number := invoice_numbers(i);
payment_total := payment_totals(i);
vendor_name := vendor_names(i);
payment_summarys(invoice_number) := payment_total;
name_summarys(invoice_number) := vendor_name;
END LOOP;
END BEFORE STATEMENT;
AFTER EACH ROW IS
temp_payment_total NUMBER;
vendor_name VARCHAR2(50);
BEGIN
temp_payment_total := payment_summarys(:new.invoice_number);
vendor_name := name_summarys(:new.invoice_number);
IF (:new.payment_total > temp_payment_total) THEN
DBMS_OUTPUT.PUT_LINE('Vendor Name: ' || vendor_name || ', Invoice Number: ' || :new.invoice_number || ', Payment Total: ' || :new.payment_total);
END IF;
END AFTER EACH ROW;
END;
/Thanks for the help! -
Hi ,
The Sort button does not work for GUID and it shows the error,
<b>Invalid sort field type in "SORT ... AS TEXT"</b>
How do I solve this problem?
Thanks and Best Regards,
BindiyaHi ,
Below is the code :
IF_HTMLB_TABLEVIEW_ITERATOR~GET_COLUMN_DEFINITIONS
==================================================
ls_coldef-columnname = 'PBI_C_VALUE_ID1'.
ls_coldef-width = '150'.
ls_coldef-title = 'Category I '.
ls_coldef-tooltipheader = 'Category I '.
ls_coldef-wrapping = zcl_zsc_co=>sc_true.
ls_coldef-edit = zcl_zsc_co=>sc_true.
ls_coldef-sort = zcl_zsc_co=>sc_true.
APPEND ls_coldef TO p_column_definitions.
CLEAR ls_coldef.
==================================================
IF_HTMLB_TABLEVIEW_ITERATOR~RENDER_CELL_START
==================================================
WHEN 'PBI_C_VALUE_ID1'.
CREATE OBJECT lr_dropdown.
lr_dropdown->id = p_cell_id.
lr_dropdown->nameofkeycolumn = 'PBI_C_VALUE_ID'.
lr_dropdown->nameofvaluecolumn = 'SHORT_NAME'.
lr_dropdown->selection = <fs_row>-pbi_c_value_id1.
lr_dropdown->disabled = lv_disable.
lr_dropdown->width = '170'.
GET REFERENCE OF mr_model_assign_sb_list->mr_model_pb_item_list->mr_model_def_category->mt_dropdown_cat_1_val INTO lr_dropdown->table.
p_replacement_bee = lr_dropdown.
==================================================
NOTE: the data element of 'PBI_C_VALUE_ID' is RAW 16.
Thanks and Best Regards,
Bindiya
Maybe you are looking for
-
"An error occurred in the communication with the BW server"
Hi, when I open BEx Analyzer and try to connect to my BW server to run a query, I get this message, "An error occurred in the communication with the BW server". Can someone help me. thanks Pat.
-
Get row element value of a Apex report into an item on an event
Hi, I am trying to assign the column value of the report into an page item. Since i used a group by to display rows on date value I cant pick the particular row date value. Please help me to resolve this issue. Thanks.
-
Download info from cond. type
Hi everyone, I need to download all the condition recs for a particular access in a condition type into Excel Spreadsheet. SAve as local file option in System-List is disabled. No one table has got the fields I wanted. Copy paste is a tedious option
-
How to represent foreign key relationship between entity services
Hi All, I have two entity services sbu and lob with remote persistensy(web service).In the sql database also i have these two tables. lob table attributes: lobId and lobName. sbu table attributes:sbuId,sbuName,and lobId.Here lobId a is foreign key re
-
Alright, I am a new Mac user and have a brand new Imac. Spontaneously, Google and everything associated with it stopped opening, including gmail. I also can't access Yahoo, but just about everything else opens on the internet. This problem occurs bot