Invalid Keywords Added on Import

Hi there
Lightroom keeps mysteriously adding keywords everytime I import a JPEG file from the hard drive. To be more specific, I import the Raw files, no problem. Export as a Tiff for photoshop, save the Tiff and create a JPEG web version in PS. Then, when I import the web version, Lightroom adds the same incorrect keywords.
Here is what I've tried to rectify the problem:
1. I've ensured that the keywords box in the import dialog is completely empty and that no metadata template is selected.
2. I've deleted all metadata templates.
3. I've cleared all recent metadata and turned off keyword suggestions.
4. To be sure, I've open the same file in photoshop before the lightroom import and checked that those keywords were not added,
I am using version 2.5, 16bit, PC version
I've searched through the forums, found similar issues but can't seem to find a solution for my problem.
My Import Menu
My Metadata Presets
Lightroom Keywords with all the Paris keywords mysteriously added.
The keywords of the exact same file in Photoshop

Have you tried inspecting the JPEG with Exiftool, or the like, before you import into LR to ensure there are no keywords in the metadata.
Sorry - just reread and you've already said you've inspected before import.
Message was edited by: PeteB2407

Similar Messages

Why do keyword synonyms get imported as separate keywords?

Hello, and sorry if this question has been asked before (it's my first time in the forums, and I find them rather user-unfriendly).
I'm currently trying to understand keywords & keyword hierarchies.
I have successfully created several keywords that include sub-keywords and synonyms, for example, the top keyword "Location" includes the sub-keyword "Europe", and for that I have entered the synonym "Europa" (German translation for "Europe").
Now, I apply the keyword "Europe" to an image, export the image, and add the exported image to my catalog. And now Lightroom automatically adds "Europa" as a separate keyword to my keyword list. This defeats the whole purpose of keyword hierarchies, since my keyword list will soon be cluttered again, and all the help sites I've browsed so far speak of uncluttered keyword lists.
So, my suspicion is that I'm doing something wrong. But I am lost... can anybody help?
I have checked the option "Write Keywords as Lightroom Hierarchy" when exporting - I thought this would mean that my exported image will contain the same keyword hierarchy and thus there shouldn't be any new keywords added to my list when adding that exported file to my catalog. But it doesn't seem to work...
Any suggestions?
Thanks a lot!

Cornelia-I wrote:
Come on, Brett,
That is no solution to Simone's problems!
She wants the full LR capability of keyword hierarchies plus synonyms on any level. This should work if you export out of LR and back in. Especially if you share such a photo with a different person.
Does your answer mean that LR is incapable of doing that? That the feature of synonyms just does not work, because LR cannot mark an exported keyword as synonym of another?
Leaving aside the awkward question of WHY one would immediately re-import an exported image - synonyms are intended to work within a given Catalog despite not being present as actual keywords on an image.
So it is not necessary to physically include synonyms either outgoing or incoming, in order for these to operate correctly while you are in the Catalog concerned. Just like Collections, synonyms and keyword nesting are properties of a Catalog; not of an image.
Any image which has a particular real keyword, "hooks into" any associated synonym behaviour automatically - and any hierarchy behaviour also.
Including these "virtual" keywords as REAL keywords on export, means that they ACt as real keywords. For example, these are no longer synonyms, they are now full keywords in their own right - so they will now show in the keywords list.
If you don't require synonyms or implied-hierarchy to be seen OUTSIDE Lightroom then - simply - don't include this in your output.
If you want to pass images on to someone else in a way that maintains all the same full Catalog functions that you have locally; you can select them and Export as Catalog. Or you can provide them with a template Catalog which already contains this structure. When they import your new image with its actual keywords, all the related virtual synonyms and hierarchy will already be there, for them to hook into.

Keywords won't import when importing Projects

Hopefully someone can help me with this mystery. I use Aperture on two machines. My iMac is my master, and my MacBook is my field computer. I recently added keywords to about 10,000 photos while sitting in a hotel room for a few days. When I got home, I exported all the affected projects from my MacBook and then subsequently imported them into my iMac. However, none of the keywords showed up! In an effort to troubleshoot, I again exported a single project from my MacBook, then imported that project into the same computer. But, again, the keywords didn't show up in the imported photos. In further troubleshooting, I tried exporting/importing a single photo (versus a project), and the keywords showed up just fine. So it appears this issue is only with importing/exporting projects, not individual photos...
In further troubleshooting, I viewed the file called 'Version-1.apversion' in the Aperture Library both prior to and after export as well as after import. As expected, the keyword info appeared in the pre- and post- export versions of the file, but it didn't appear in the post-import version:
<key>keywords</key>
<array>
<string>Alyssa Family People</string>
<string>Alyssa's Friends Friends People</string>
</array>
I can post the entire contents of the file if that helps you diagnose my problem, but the files are essentially the same (other than the date and ID info). Anyone have the key to this riddle?? I'd really rather not export/import all the photos individually!

Upon further troubleshooting, this problem only appears to affect my keywords. All other IPTC/EXIF data imports properly (for instance: headline, byline, event name, city, country, etc.).
I analyzed the package files associated with the images immediately prior to and after project export, and for the most part they are identical, which seems to indicate the project export functionality is working properly. However, it for some reason drops off the associated keywords during project import (file|import|project), so it appears my problem is at this step?? Thanks!!

Error:Invalid WSDL URL While Importing Internet WSDL In Webdynpro

Hi Everyone,
I Am Facing Error While Importing Webservices in Webdynpro.
https://usint.skire.com/ws/services/mainservice?wsdl
The above WSDL I tried in Both Webservice Model and Adaptice Webservice Model.
I Am Geeting Invalid WSDL URL.
is any configuration required for https [SSL Webservices]Under Visual Admin Level.
I Am Able To Consume the http Webservices in Internet www.webservicex.net
In that site i took three webservices and i am able to cosnume all these tings in Webdynpro.
The above https services i am facing the problem.
Thanks
SubbaRao

Hi,Thanks For Reply,
I Am getting the Invalid WSDL URL After Importing into Webdynpro.
When I CHecked Under Wsnavigator Of Portal.
i am getting below error
Cannot download WSDL from https://usint.skire.com/ws/services/mainservice?wsdl: ERROR : Trying to resolve qualified base : DataHandler, but the uri resolver is not able to resolve the relevant namespace.
Thanks
SubbaRao

VDBench invalid keyword: dedupratio

I am working with VDBench50402 and I would like to set the dedupe ratio using the dedupratio= parameter. When I run the workload I get the error:
22:01:21.626 HostParms.ReadParms(): invalid keyword: dedupratio
22:01:21.626
java.lang.RuntimeException: HostParms.ReadParms(): invalid keyword: dedupratio
at Vdb.common.failure(common.java:306)
at Vdb.HostParms.readParms(HostParms.java:130)
at Vdb.Vdbmain.parseParameterLines(Vdbmain.java:628)
at Vdb.Vdbmain.main(Vdbmain.java:551)
Any idea why this might be? I will include the logfile and config files in their entirety.
LOGFILE
22:01:21.548 Vdbench distribution: vdbench50402
22:01:21.548
22:01:21.564 input argument scanned: '-fC:\vdbench\WorkloadConfig\ExchangeHeavy.txt'
22:01:21.564 input argument scanned: '-oC:\vdbench\1\ExchangeHeavyOut'
22:01:21.564 java.vendor Oracle Corporation
22:01:21.564 java.home C:\Program Files (x86)\Java\jre7
22:01:21.564 java.vm.specification.version 1.7
22:01:21.564 java.vm.version 24.60-b09
22:01:21.564 java.vm.vendor Oracle Corporation
22:01:21.564 java.specification.version 1.7
22:01:21.564 java.class.version 51.0
22:01:21.564 user.name Administrator
22:01:21.564 user.dir C:\vdbench
22:01:21.564 java.class.path C:\vdbench\;C:\vdbench\classes;C:\vdbench\vdbench.jar
22:01:21.564 os.name Windows Server 2008 R2
22:01:21.564 os.arch x86
22:01:21.564 os.version 6.1
22:01:21.564 sun.arch.data.model 32
22:01:21.610
22:01:21.626 HostParms.ReadParms(): invalid keyword: dedupratio
22:01:21.626
java.lang.RuntimeException: HostParms.ReadParms(): invalid keyword: dedupratio
at Vdb.common.failure(common.java:306)
at Vdb.HostParms.readParms(HostParms.java:130)
at Vdb.Vdbmain.parseParameterLines(Vdbmain.java:628)
at Vdb.Vdbmain.main(Vdbmain.java:551)
CONFIG FILE
hd=default,vdbench=/vdbench,
hd=ExchHeavy1,system=192.203.5.1,shell=vdbench
hd=ExchHeavy2,system=192.203.5.2,shell=vdbench
hd=ExchHeavy3,system=192.203.5.3,shell=vdbench
hd=ExchHeavy4,system=192.203.5.4,shell=vdbench
hd=ExchHeavy5,system=192.203.5.5,shell=vdbench
hd=ExchHeavy6,system=192.203.5.6,shell=vdbench
hd=ExchHeavy7,system=192.203.5.7,shell=vdbench
hd=ExchHeavy8,system=192.203.5.8,shell=vdbench
hd=ExchHeavy9,system=192.203.5.9,shell=vdbench
hd=ExchHeavy10,system=192.203.5.10,shell=vdbench
dedupratio=2
sd=sd1,host=*,lun=\\.\PhysicalDrive1,threads=30
wd=wd1,sd=sd1,xfersize=8192,rdpct=55,seekpct=eof
rd=run1,wd=wd1,iorate=700,elapsed=48h,interval=60
Thanks for any help on this.
DW

That was it. I moved it to the top of the config file and it ran.
Thank you very much.
DW

Keywords from previous import lost

In prior versions, LR facilitated importing images from multiple cards by retaining the previous settings in the import dialog. In version 3.all, it clears out the keywords section. This means you have to retype all those keywords, with every single card. I much prefer the behavior in the prior two versions. I have not seen anywhere to set this as an option. Does this mean that the LR development team intended this behavior, or is it a bug? If this behavior is intentional, PLEASE give us the option to retain the previous settings in keywords.
And while you are fixing things, the default "start number" in the file renaming section of the dialog should be one more than the last number used during the prior import. Otherwise you need to go to the last directory and check the last number generated on the previous import. This is silly; calculating the next correct "start number" is precisely the sort of thing that computers can do without human intervention, and given that LR is touted as a workflow solution, it should be included.

All you can do is what I did, submit a bug report. I hate that it clears the "last used" as well. In my case, some of the time it even forgets where the import directory was... sigh.
So, it's work arounds until someone figures out that keeping the last used, etc, could be a good thing and puts it back. Adding your own bug reports will raise it a bit higher in the priority list to get it seen.
Cheers!

Keyword tags for imported iPhone photos disappeared from LR5.7 catalog under OS 10.10.1Yosemite.

I am using LR 5.7 on a Mac OS 10.10.1 with a Time Machine backup - the vast majority of my photos were taken on an iPhone 5 in the year 2014 and are in a folder on my computer internal hard drive.
The structure is my Folders > Macintosh HD which has a folder inside called
Pictures Users/myname with 1719 photos in it -
when I click on this folder the following folders open up:
> folder dated 1904(?) with 2 items
> folder dated 2012 with 1 item
> folder dated 2013 with 1 item
> folder dated 2014 with 1352 items...
.... and so on until
>Exported Original Photos 365 (which are exports of photos from iPhoto that I wanted to catalog and develop in LR)
The Maths are correct. But as for the tags:
when I open the folder Pictures Users/myname containing 1719 photos and view them as thumbnails I see all the keywording applied to my collection of photos
BUT when I open the folder Pictures - Users/myname and then folder 2014, I see a list:
folder 2014 with 199 items
folder 2014-01-20 with 1 item
folder 2014-01-21 with 5 items
etc
All well and good.
BUT if I open these dated folders with small numbers of images in them (never more than 50 per day), view the images in a grid and click on a photo, there are no keyboard tags to be seen in the information panel. They only time I see any keyword tags that I have entered is when I open Macintosh HD > Pictures - Users/myname which contains my entire library of photos taken in 2014 and those added to the catalog from iPhoto.
Should I see tags for the photos in the individually dated folders e.g. Macintosh HD > Pictures - Users/myname > 2014 > 2014-01-20 and so on day by day ?
I have been tagging my photos with keywords after my weekly import. And have been doing this after viewing each photo from the grid view of photos displayed by clicking on Macintosh HD >Pictures - Users/myname.
Have I made an error?
I want to tag my collection of photos by the correct method before it grows in size.
Many thanks
David (Brighton, UK)

Hi,
I moused down on the "+" sign where it says Folders and "show photos in subfolders" was shown as already being "on".
I followed your suggestion: I tried to keyword the photo in Macintosh HD/Pictures - Users/myname/folder 2014-01-20 with 1 item however it did not permit me to type in a keyword in the keyboarding section panel on the left hand side, so I was unable to check if it stuck.
I don't know whether this is important or not, but the list of folders, subfolders etc have slightly different arrow heads:
If I drop down the Macintosh HD location there is a SOLID, grey downward pointing arrow to the left hand side of the folder Pictures - Users/myname/..
However, if you drop down folders from Macintosh HD > Pictures - Users/myname/.. to show inner folders:
Macintosh HD> Pictures - Users/myname/... > folders dated 2014-01-20 etc., then there is a horizontal triangle that is made up of grey dots rather than a solid triangle for every dated folder - is this as expected?

EXTENDED keyword Added automatically in all static NAT after 8.25 to 9.02

Hi Team,
We are facing one serious issue while upgrading our ASA 5585 from 8.25 to 9.01, while converting the code we are facing this below error
nat (inside,wan) source static obj-10.x.x.x obj-10.x.x.x extended destination static obj-x.x.x. obj-x.x.x
^
ERROR: % Invalid input detected at '^' marker
But when configuring we removed that extended keyword and configured it is taking but when we see in the show configuration it whill show with the extended keyword only
WANFW01(config)#nat (inside,wan) source static obj-10.x.x.x obj-10.x.x.x destination static obj-x.x.x. obj-x.x.x
WANFW01#show run | in destination static obj-x.x.x. obj-x.x.x
nat (inside,wan) source static obj-10.x.x.x obj-10.x.x.x extended destination static obj-x.x.x. obj-x.x.x
nat (inside,wan) source static obj-10.x.x.x obj-10.x.x.x extended destination static obj-x.x.x. obj-x.x.x
nat (inside,wan) source static obj-10.x.x.x obj-10.x.x.x extended destination static obj-x.x.x. obj-x.x.x
Any one please suggest the BUG ID for this issue.
Model:asa 5585
IOS:asa902-10-smp-k8.bin
Regards,
Arun

Hi,
There does seem to be a bug.
The Command Reference does state that is supposed to be a parameter used with Dynamic PAT.
Did a quick test on my own ASA with software versions 9.0(2)10 and 9.0(2)
It seems while normally adding for example a NAT0 type configuration with Twice NAT the ASA does indeed insert the parameter "extended" to a "static" configuration.
When I then boot up the software back to 9.0(2) from 9.0(2)10, the ASA shows a error during boot up and rejects the command that was in the configuration on the newer software.
I didn't find any Bug ID about this sort of problem so it is either something that is not public or it just hasnt been added to the database? I guess you should either open a TAC case or wait for an answer from Cisco employee. Natutally might be that I just have missed the Bug while looking for it.
- Jouni

SSIS 2012 is intermittently failing with below "Invalid date format" while importing data from a source table into a Destination table with same exact schema.

We migrated Packages from SSIS 2008 to 2012. The Package is working fine in all the environments except in one of our environment.
SSIS 2012 is intermittently failing with below error while importing data from a source table into a Destination table with same exact schema.
Error: 2014-01-28 15:52:05.19
   Code: 0x80004005
   Source: xxxxxxxx SSIS.Pipeline
   Description: Unspecified error
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC0202009
   Source: Process xxxxxx Load TableName [48]
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Invalid date format".
End Error
Error: 2014-01-28 15:52:05.19
   Code: 0xC020901C
   Source: Process xxxxxxxx Load TableName [48]
   Description: There was an error with Load TableName.Inputs[OLE DB Destination Input].Columns[Updated] on Load TableName.Inputs[OLE DB Destination Input]. The column status returned was: "Conversion failed because the data value overflowed
the specified type.".
End Error
But when we reorder the column in "Updated" in Destination table, the package is importing data successfully.
This looks like bug to me, Any suggestion?

Hi Mohideen,
Based on my research, the issue might be related to one of the following factors:
Memory pressure. Check there is a memory challenge when the issue occurs. In addition, if the package runs in 32-bit runtime on the specific server, use the 64-bit runtime instead.
A known issue with SQL Native Client. As a workaround, use .NET data provider instead of SNAC.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

ORA-20091: Invalid Application ID when importing APEX 4.0 Application

Hi Folks
Anyone got a suggestion on this one?
Scenario:
1. Perform an APEX 4.0 Export of application ID 10132 from one workspace
2. Import the application into another APEX 4.0 workspace and change the application ID whilst doing so.
3a. During the import process, override the application ID to one that exists in the workspace being imported into.
In APEX 3.2 you got a warning that you were overwriting an existing app
In APEX 3.2 this would then complete the exercise with your new app replacing the previous one with the same ID
In APEX 4.0 I received ORA-20091: Invalid Application ID
3b. Delete the pre-existing application (e.g. app_id 999) completely in the workspace we intend to import into
Following successful deletion of the application (app_id 999) attempt to import the application export file from the other workspace
During the import, use the UI to change the application id from 10132 to 999.
Still receive the ORA-20091: Invalid Application ID error despite APP ID 999 having been deleted
4. I got this to work by allowing APEX to simply assign a new application ID
My problem is that, whilst this was not a problem when importing to our UAT environment, our DEV and Production environments share the same APP ID (10132) this is so that when upgrading the production application, users saved Interactive reports are preserved. This was fine in APEX 3.2 but is, as yet, untested by us in 4.0.
As things stand at the moment, we have APEX 4.0 in DEV and UAT but this would appear to be a block for us in terms of upgrading production to 4.0.
Any thoughts, comments and suggestions welcome.
Many thanks
Kind regards
Simon Gadd

We ran into a similar problem. My initial tests showed the following to be a work around.
Assumption: You want to end up with the same ID as the original so you don't have to give a new link to everyone.
1. Before copying the app (lets say it's 333) from 3.2 (3.1 in our case) export it and then import it back, still in 3.x with a different app ID, i.e. 99333.
2. In ApEx 4: Import the app 99333 and install it with app ID 333 (the original app ID). After this process, I was able to make necessary changes to the app on ApEx 4, export it, and then import it again, still as ID 333.
I know this sounds very round-about, and I can't explain why it worked, but it worked.
Disclaimer: I certainly may have missed something that would still make it break. This was the result of a few different test scenarios done in a limited time.
So, it's probably best to wait for 4.0.1 if you can.
By the way, I tried creating a brand new app. in ApEx 4, export it and then import it as itself, and I still got the same error. Like I said, I don't know why it worked, but when I imported an older app with one ID into ApEx 4 with a new ID, I was able to export it and then import it again with that same new ID.
Have a great weekend,
Gregory

Adding or importing iTunes Visualizers

I've been curious to know if anyone knows of or has found a way that visualizers in iTunes can be moved or imported from different machines. The task I'm trying to figure out, is the Jelly visualizer that's available in iTunes on 10.5/10.6 machines, if it can be made to work on iTunes for Windows Vista/7 64-bit? I absolutely love this visualizer, and would love to see it in Windows, as I'm primarily a Windows user.

Well, iTunes 10 is now out, and I'm sadly disappointed to see that they have not added any new visualizers to the application, so we're still stuck with the old 2 (although they still are quite trippy).
Maybe this would be ample opportunity for you code crawlers out there to see if there is in fact, a way to import/export different visualizers from the mac version of iTunes to the PC version, I'm still on the hunt to get that Jelly visualizer in iTunes for Mac over to the pc version

Are keywords added through Lightroom embedded into the file itself?

I'm new to Lightroom. I'm looking for a way to organize my pictures and videos. But I'm also hestitant because I have no idea whether Lightroom will be around 10, 15 or 20 years from now. When I apply a keyword to a file, is that keyword permanently embedded into the file itself? The reason I'm asking is I'm most likely going to spend a ton of time applying keywords to my files. What happens if 10 years down the road Lightroom disappears or a need to move to a new program? Are the keywords dependent on Lightroom or will the keywords that I add to the picture and videos remain with those files and be recognized by the new program?

Yes, LR writes the keywords, and indeed all the metadata from the right-hand side (title, caption, capture date, etc.), into industry-standard fields in the image's file. LR is reasonably compliant with industry standards, so you can be confident that your data will be read by programs in the future.
Most people set the option Catalog Settings > Metadata > Automatically Write Changes Into XMP, which will write the metadata back to the file in background after you change it. If you don't set that option, you'll have to manually do Metadata > Save Metadata To File.
Important note for video: LR does not fully support video metadata, and it doesn't write any metadata back to videos. So if you want your metadata to get written back to the file system independent of the LR catalog, you'll need to use either the Video Asset Management plugin or the Any File plugin to manage your video. These third-party plugins create "sidecar" JPEG files into which your metadata changes will be stored.

Keywords added to new files....

I am not sure about the origin of this behaviour but when I open a new file it already has a group of keywords that I have used in the past.
I am unable to determine where I can turn this behaviour off.
I generally move the images from flash drive to hard drive then import into Lightroom. However, I think these keywords were originally created in Bridge and at one time I used this list of keywords for a specific group of files.
Now, I can't turn off this automatic application of keywords.
Using CS3 and LR2.
Thank you for any thoughts and info!
kristin

Hi Curt,
Thank you for your reply. After posting, I searched everywhere for the source of those keywords. I finally found that I had earlier created metadata template in LR...that template was using those keywords.
As is often the case with me, I was learning LR "on the fly"...just before my daughter's wedding. LR was a lifesaver but, as you can see, I may have forgotten more than I learned.
In any case, I appreciate your help and maybe this will help someone else. I just had to go into LR and edit that template, along with making some manual keyword adjustments.
These forums are so helpful, wish I could contribute more...
Thank you, Curt.
kristin

"Invalid object path" Driver Import

PS P01:\> Add-CMDriverToDriverPackage -DriverName $item.LocalizedDisplayName -DriverPackageName $HWType -verbose
VERBOSE: Executing WQL query: SELECT * FROM SMS_DriverPackage WHERE Name='Microsoft.HyperV.W7X64'
VERBOSE: Query options: ExpectResults
VERBOSE: Performing the operation "Add" on target "DriverToDriverPackage: Name="Microsoft.HyperV.W7X64"".
VERBOSE: Executing method 'RequestLock' against class 'SMS_ObjectLock'
VERBOSE: Input properties:
VERBOSE: -- :: ObjectRelPath == SMS_DriverPackage.PackageID="P010009C"
VERBOSE: -- :: RequestTransfer == True
VERBOSE: Output properties:
VERBOSE: -- :: AssignedMachine == <SERVER>
VERBOSE: -- :: AssignedObjectLockContext == b72216b2-de12-453a-98d6-89bbcdd88443
VERBOSE: -- :: AssignedSiteCode == P01
VERBOSE: -- :: AssignedTimeUTC == 10/28/2014 10:19 PM
VERBOSE: -- :: AssignedUser == <USER>
VERBOSE: -- :: LockState == 1
VERBOSE: -- :: RequestID == 3F595BA4-BEAF-4707-B824-A786AD02EAD5
VERBOSE: -- :: RequestState == 10
VERBOSE: -- :: ReturnValue == 0
VERBOSE: Lock acquisition on 'SMS_DriverPackage.PackageID="P010009C"' returned: Granted
VERBOSE: Executing WQL query: SELECT * FROM SMS_Driver WHERE LocalizedDisplayName='Microsoft Hyper-V Network Adapte
r'
VERBOSE: Query options: ExpectResults
VERBOSE: Query 'SELECT * FROM SMS_Driver WHERE LocalizedDisplayName='Microsoft Hyper-V Network Adapter' ' processed
1 results.
VERBOSE: Executing WQL query: Select CTC.ContentID From SMS_CIToContent As CTC Join SMS_Driver As DR On DR.CI_ID=CT
C.CI_ID Where DR.CI_ID=16786189
VERBOSE: Query options: None
VERBOSE: Executing method 'ReleaseLock' against class 'SMS_ObjectLock'
VERBOSE: Input properties:
VERBOSE: -- :: ObjectRelPath == SMS_DriverPackage.PackageID="P010009C"
VERBOSE: Output properties:
VERBOSE: -- :: ReturnValue == 0
VERBOSE: Lock release on 'SMS_DriverPackage.PackageID="P010009C"' success: True
Add-CMDriverToDriverPackage : Invalid object path
At line:1 char:2
+ Add-CMDriverToDriverPackage -DriverName $item.LocalizedDisplayName -DriverPacka ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Microsoft.Confi...rPackageCommand:AddDriverToDriverPackageCommand) [
Add-CMDriverToDriverPackage], WqlQueryException
+ FullyQualifiedErrorId : UnhandledExeception,Microsoft.ConfigurationManagement.Cmdlets.Osd.Commands.AddDrive
rToDriverPackageCommand
Does anybody know a workaround for this bug?
Same error in Add-CMDriverToDriverPackage and Import-CMDriver
How will be the WMI Commandlet?
Please Help. THX

Hi,
Please refer to the link below:
Import-CMDriver
http://technet.microsoft.com/en-us/library/dn151073(v=sc.20).aspx
More info:
ConfigMgr Driver Injector
This tool will help you to capture installed drivers on your workstations and then will automatically import them in ConfigMgr 2012.
http://gallery.technet.microsoft.com/ConfigMgr-Driver-Injector-aae7d17d
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Hi Xin Guo,
thx for post, but you can try the syntax and it will fail, cause what i read there is since 2012 R2 CU 3 some changes also in SQL and so the command with Paramater
-DriverPackageName
will not work correctly and abort, so the Technet Page is here not the Solution about.
Also i don't need an extra Tool, cause i have all driver's but for the massimport i want to use wmi, powershell.
Help :)

Lighttable View mode, Keyword Sets for Import

1. I'd be nice if we could have some sort of "Lighttable View" mode for the Library module. It would be similar to the Survey Mode, but you can move the photos around on the screen and sort or group them to your liking. E.g., after photographing a demo you could put the shots of the masses in one corner, photos of the police in another etc., the pictures still being double-clickable of course. This way choosing your keepers would become easier I think. It would be nice if Lightroom saved the arrangement, too.
2. I'd like to see Keyword sets for the Import dialog. E.g. every weekend I need the set "soccer, men's, 2009/2010, AAA league". To have presets like this would make it even easier to work with Lightroom

Right
1)
As a professional photographer I need a lighttable as there is one in "Apple´s Aperture".
We need a possibility to arrange photos easily and quiclkly and set a aperture to some of thenm right at the shooting set, to demonstrate the
client how the different photos/locations could be arranged and how they could match together later in the magazine etc.
This is not a toy feature. Apple understood, that it is a feature we need to have to brainstorm
right at the set or at home. And this feature sometimes creates right at the set new ideas or prevent
failures.
So please Adobe, let there be a "real lighttable" in the next Lightroom version.
Humans just don´t think in grid mode.

Invalid Keywords Added on Import

Similar Messages

Maybe you are looking for