Invalid Link for 9.2.0.1 EE/SE/S/P/Client 32-bit Windows Server 2003

Hello,
The OTN download for Oracle 9i Release 2 (9.2.0.1) 32-bit for Windows Server 2003 is incorrect. This link brings you to the 9.2.0.3 PATCHSET download, and NOT the base release software.
Here is the contents of the link when followed.
"Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit)
     Download the Complete Files
          OUI220180.zip (47,405,300 bytes)
          9203WIN2K3.zip (181,643,734 bytes)
     Documentation
          Oracle9i Database Release 2 for Windows Server 2003 (32-bit) Release Notes (PDF/HTML)
     Directions
          1. Before downloading, please review the product certification information for this product.
          2. Consult the release notes for download and installation instructions."
I need to download the 9.2.0.1 32-bit Client. The eDelivery site only has the 9.2.0.1 64-bit release.
OTN Admins - please help!
Regards,
Steve

Are there any moderators checking this forum?
I called Oracle support and requested a shipment for Oracle9i for Windows Server 2003. I made sure that whatever media pack they were sending me what explicitly for 2003. It was for both 2000 & 2003 however the client/database CDs for 2003 are only for 64-bit.
If 9i 32-bit is the only certified version for AMD processors why isn't it in included the media pack? There's a nice sticker on the back that notifies you that the 32-bit software requires an additional upgrade that is available from OTN.
So, If OTN's link is bad and no one is from OTN is moderating this site then how on Earth is anyone able to aquire this software version? Oracle's Metalink offers no solution outside of posting to this forum.
-Steve

Similar Messages

Invalid OTN Link for 9.2.0.1 EE/SE/S/P/Client 32-bit Windows Server 2003

Hello,
The OTN download for Oracle 9i Release 2 (9.2.0.1) 32-bit for Windows Server 2003 is incorrect. This link brings you to the 9.2.0.3 PATCHSET download, and NOT the base release software.
Here is the contents of the link when followed.
"Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit)
Download the Complete Files
OUI220180.zip (47,405,300 bytes)
9203WIN2K3.zip (181,643,734 bytes)
Documentation
Oracle9i Database Release 2 for Windows Server 2003 (32-bit) Release Notes (PDF/HTML)
Directions
1. Before downloading, please review the product certification information for this product.
2. Consult the release notes for download and installation instructions."
I desparately need to download the 9.2.0.1 32-bit Client. The eDelivery site only has the 9.2.0.1 64-bit release. I contacted Oracle support to have CDs shipped and they arrived today however no 32-bit client was contained inside. The sticker on the back directs you to OTN for download.
Is anyone able to help me?
Regards,
Steve

Found the solution
Steve - you need to install 9.2.0.1 for NT/2000/XP and then apply the 9.2.0.3 patch to bring it to 9.2.0.3 for Windows 2003.
It's in the release notes on that page:
http://download-west.oracle.com/docs/html/B10924_01/toc.htm
Hope that helps..

How To Configure GP For Client DC on Windows Server 2003

Dear all,
I have been installed windows server 2003 and make one DC on my server. And i create several group and want to make policy for that each group. For example I have created '2014' group and all user who join my dc and registered as a part of '2014' group couldn't
access their browser such as Firefox and IE and couldn't access their bluetooth. How can I make it possible?
Thanks before.
Warm Regards,

Hi Denni Sembiring,
Could you clarify your question “all user who join my dc and registered as a part of '2014' group couldn't access their browser such as Firefox and IE and couldn't access their
Bluetooth”, are you want to realize to limit some user can access the specific software and computer device? GPOs can be linked to the following levels:
•Site
•Domain
•Organizational Unit
We can not link GPO to group, if you want to limit specific user can only access specific software you can refer the following KB to restrict user access.
The related KB:
How To use Software Restriction Policies in Windows Server 2003
http://support.microsoft.com/kb/324036
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

RDS invalid licensing Windows Server 2003 Client

I have two Windows Server 2012 Session Host Server and two Windows 2012 Connection Brokers. One Connection Broker configured with remote desktop License.We are Using License type is per device cal.
On Server A, I can access RDP from Windows 7 clients and from Windows XP clients Windows Server 2003 Clients.
On Server B I can only RDP from Windows 7 clients and Windows XP Clients NOT from Windows Server 2003 Clients). The error is"The remote session was disconnected because the remote computer received an invalid licensing message from this computer"

Hi Gyan,
Which version of client RDP you are using in your environment?
Did you receive any particular Event ID during this issue?
Here for your issue I found something to let u know, if licensing mode on the terminal server is set to Per Device but the license server is configured to issue only Per User CALs, then only temporary Per Device licenses are issued from the available pool of
licenses. The license cannot upgraded.
Please check the license is properly configured and activated. If not then you can contact MS clearing house or try to change the terminal server licensing mode.
Please refer below link for more information.
The remote session was disconnected because the local computer's client access license could not be upgraded or renewed
http://technet.microsoft.com/en-us/library/cc737592(v=ws.10).aspx
You need to verify the terminal server because it can’t able to locate the license server.
The terminal server cannot locate the license server
http://technet.microsoft.com/en-us/library/cc758805(v=ws.10).aspx
Hope it helps!
Regards.

[svn:fx-4.x] 15104: Fix for invalid links for @see of inherited styles

Revision: 15104
Revision: 15104
Author:   [email protected]
Date:     2010-03-29 07:36:44 -0700 (Mon, 29 Mar 2010)
Log Message:
Fix for invalid links for @see of inherited styles
QE notes: None.
Doc notes: None.
Bugs: SDK-26002
Reviewed By: Darrell
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-26002
Modified Paths:
    flex/sdk/branches/4.x/asdoc/templates/asdoc-util.xslt
    flex/sdk/branches/4.x/asdoc/templates/class-files.xslt

[svn:fx-4.x] 15377: Fix for invalid links for inherited skin part depending on package depth

Revision: 15377
Revision: 15377
Author:   [email protected]
Date:     2010-04-13 12:53:59 -0700 (Tue, 13 Apr 2010)
Log Message:
Fix for invalid links for inherited skin part depending on package depth
QE notes: None
Doc notes: None
Bugs: SDK-26208
Reviewer: Darrell
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-26208
Modified Paths:
    flex/sdk/branches/4.x/asdoc/templates/class-files.xslt

Stope
Mailing me ***
Sent from my I phone

Incorrect link for "Oracle9i Release 2 for Windows Server 2003 (32-bit)

Hi. Go to here http://www.oracle.com/technology/software/products/oracle9i/index.html
Then, under "Oracle9i Release 2 (9.2.0.1)", try to download "Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit). It just gives you a patch. It's not the correct link. Where is the full CD images!
Compare this to the 64-bit version under "Oracle9i Release 2 (9.2.0.2). This does have 2 big CD images.
Can you fix the link? I need the software for Windows Server 2003 (32-bit). Thanks.

Yes, it's a little confusing but it's all in the release notes on that page. Basically, you need to install 9.2.0.1 for WinNT/2000 first and then apply the patch to bring it up to v9.2.0.3 for Windows 2003.

Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2 never finishes searching for updates and use 100% of CPU.

Hi everyone, I am having issues updating a clean Windows Server 2003 R2 Enterprise Edition 32 bits Service Pack 2, so any help with be appreciated cause I've already tried all my cards for the past 5 days in this particular issue without success.
All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
I already tried the following scenarios:
1- Install IE8, install the update KB927891 and the Windows Update Agent 3.0 (I already had this one installed). Reboot and run windows update trough IE8 and the problem did not solved.
2- Install those 2 software "MicrosoftFixit.wu.MATSKB.Run" and "MicrosoftFixit50777", open IE to update, it still hangs and continues eating my CPU. This is the output of "MicrosoftFixit".
Windows Update error 0x8007000D(2014-01-06-T-06_06_34A) --> Not Fixed
Cryptographic service components are not registered (This service is actually running successfully) --> Not Fixed
3- I found the following script that would register some DLL, deleting the "SoftwareDistribution" and forcing windows update to solve the problem and nothing happened either.
Link to script:
http://gallery.technet.microsoft.com/scriptcenter/Dos-Command-Line-Batch-to-fb07b159#content
Here is a link to the content of my WindowUpdate.log file:
https://skydrive.live.com/redir?resid=883EE9BE85F9632B%21105
Thank you in advance for helping.

All I did so far is installing Windows Server 2003 R2 Enterprise with Service Pack 2, open IE to update, it keeps searching for updates and never stop, after 20mn to 30mn the process svchost.exe start using 100% of my CPU.
Herein is the root cause of your issue. A topic that's been discussed in several blogs, forums, and even in the media since September regards a known issue with attempting to patch IE6 RTM via Windows Update.
Aside from that particular issue... browsing the Internet with an unpatched instance of IE6, especially from a Windows Server system, is also asking for a world of hurt.
Might I suggest the following:
Download the IE8 for Windows Server 2003 installer to a thumb drive.
Download the latest Cumulative Security Update for IE8 for Windows Server 2003 to a thumb drive.
Reinstall Windows Server 2003 with Service Pack 2.
Upgrade to IE8 from the thumb drive installer and apply the
Cumulative Security Update.
Now your machine is capable of safely browsing to Windows Update to install the rest of the updates (well, maybe, there's also all those other Security Updates from the past seven years that your machine still has vulnerabilites for -- even those seven
years of updates are going to take a Very Long Time to scan for, download, and install).
Why don't you have a WSUS server? -- noting, wryly, that you've posted in the *WSUS* forum.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Tiger 10.4.4 or 5 and Windows Server 2003 Services For Macintosh unstable??

We are running these tested Mac clients here:
macMini 1.5Ghz 10.4.5
G4 Quicksilver 800Mhz 10.4.4
G4 Dual Mirror PowerMac 10.4.4
They mount volumes on these servers:
Dell Windows Server 2000 (SFM)
Dell Windows Server 2003 (SFM)
Xserve G4 OS 10.3.9 Server
Macs sleep settings are this:
Computer sleep=1 hour
Display sleep=1 hour
Hard drive=sleep
Symptom:
When the Mac goes to sleep, the 2 Windows Mac File servers volumes are
disconnected. Upon wake, the error message stating they were disconnected are waiting.
The Xserve volume is untouched. This should not be a problem
since the Windows servers are running Appletalk via IP not
native Appletalk protocol.
Comments:
Might be related to the lookupd bug in Tiger? http://www.macintouch.com/readerreports/macosx1042/topic3108.html
Here’s the system log from the macMini: (13:47 is when I woke it and manually mounted the volumes)
Feb 23 09:37:22 M00XXX /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/ATSServer: ***********************************
Feb 23 13:14:13 M00XXX kernel[0]: AFPSleepWakeHandler: going to sleep
Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
Feb 23 13:14:13 M00XXX kernel[0]: AFP_TCP ASP_TCP SendSleepPkt: sending regular sleep
Feb 23 13:14:24 M00XXX configd[32]: AppleTalk shutdown
Feb 23 13:14:25 M00XXX configd[32]: AppleTalk shutdown complete
Feb 23 13:14:28 M00XXX launchd: Server 0 in bootstrap 1103 uid 0: "/usr/sbin/lookupd"[88]: exited abnormally: Hangup
Feb 23 13:14:28 M00XXX configd[32]: posting notification com.apple.system.config.network_change
Feb 23 13:47:06 M00XXX kernel[0]: System Sleep
Feb 23 13:47:06 M00XXX kernel[0]: System Wake
Feb 23 13:47:06 M00XXX kernel[0]: Wake event 0020
Feb 23 13:47:08 M00XXX kernel[0]: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
Feb 23 13:47:08 M00XXX kernel[0]: USB caused wake event (OHCI)
Feb 23 13:47:08 M00XXX configd[32]: setting hostname to "M00XXX.local"
Feb 23 13:47:08 M00XXX configd[32]: AppleTalk startup
Feb 23 13:47:10 M00XXX kernel[0]: AFPSleepWakeHandler: waking up
Feb 23 13:47:11 M00XXX configd[32]: AppleTalk startup complete
Feb 23 13:47:12 M00XXX configd[32]: posting notification com.apple.system.config.network_change
Feb 23 13:47:12 M00XXX lookupd[7515]: lookupd (version 369.2) starting - Thu Feb 23 13:47:12 2006
Feb 23 13:47:12 M00XXX configd[32]: setting hostname to "m00xxx.secret.com"
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/VOL1
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/VOL1
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received VQ_DEAD event (32)
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL1', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-1.2c000009', dead
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL1, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/VOL2', from 'afp_3Xs1VX4aumPi3flxDN2GLoYD-2.2c00000a', dead
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/VOL2, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 found 2 filesystem(s) with problem(s)
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Invalid reconn token length 0 /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: AFP Version 4 does not support reconnect /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: Reconnect not allowed /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_Reconnect: posting to KEA to unmount /Volumes/Asura_Queues
Feb 23 13:47:13 M00XXX kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Asura_Queues, flags 524288, pid 39
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 type 'afpfs', mounted on '/Volumes/Asura_Queues', from 'afp_3QgJ7Z2s2fVR2flF2I2ZlbNQ-1.2c00000b', dead
Feb 23 13:47:13 M00XXX KernelEventAgent[39]: tid 00000000 received unknown event (48)
Feb 23 13:49:54 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/Asura_Queues, pid 7519
Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL1, pid 7520
Feb 23 13:50:13 M00XXX kernel[0]: AFP_VFS afpfs_mount: /Volumes/VOL2, pid 7520

My SMB share get disconnected while my Powerbook was still running.
Errors in system.log:
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 received VQ_DEAD event (32)
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 type 'smbfs', mounted on '/Volumes/backup', from '//HALO;CYONG@PEANUTS/BACKUP', dead
May 8 23:08:13 snoopy KernelEventAgent[46]: tid 00000000 found 1 filesystem(s) with problem(s)
Anyone else having the same problem?

Incorrect download file for Oracle 9.2.0.1 for Windows server 2003

Hi,
I am trying to get hold of the Oracle 9.2.0.1 client software for Windows server 2003 from <http://www.oracle.com/technology/software/products/oracle9i/index.html> the link is in the section "Oracle9i Release 2 (9.2.0.1)", titled "Oracle9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32-bit)"
I follow the links through and download the OUI and "9.2.0.1" software, however after downloading and unzipping the package it seems that the download was actually the 9.2.0.3 patch that cannot be installed without 9.2.0.1 installed first. I tried this on Friday and today with the same results.
Could you tell me how I get hold of the 9.2.0.1 client software for Windows Server 2003 please?
Thanks,
Mark Williams

As Windows 2003 is officially released this week, I believe Oracle will shortly announce which versions of the database will be supported on Windows 2003. Stay tuned.
Alison

Need info for installation of SAP XI on Windows server 2003

Hi All,
I need system requirement ( hardware and software) for the installation of SAP XI 3.0 only on Windows server 2003.
It would be great if anyone can share the installation steps.
Thanks in Advance...
Regards
Venkatesh

Hi venkatesh,
Plesae go through these links.
Procedure to install :
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
Configuration Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
A Beginner?s Guide to SAP XI Settings, Part I
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/73527b2c-0501-0010-5398-c4ac372c9692
Guide to SAP XI Settings, Part II
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6bd6f69a-0701-0010-a88b-adbb6ee89b34
General Configuration Steps
http://help.sap.com/saphelp_nw04/helpdata/en/cf/230240d981e469e10000000a155106/content.htm
SAP Exchange Infrastructure (XI) : Installation & CONFIGURATION GUIDE
http://help.sap.com/saphelp_nw04/helpdata/en/d7/f01a403233dd5fe10000000a155106/frameset.htm
Personal Settings
http://help.sap.com/saphelp_erp2004/helpdata/en/e9/c4cc9b03a422428603643ad3e8a5aa/content.htm
Roles and Tool Access : Administration, Technical Configuration,Design,Configuration,Monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
http://www.forumtopics.com/busobj/viewtopic.php?t=59586&start=15&postdays=0&postorder=asc
SLD:
How To?Handle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How To?Handle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Refer these post installation links
http://help.sap.com/saphelp_nw70/helpdata/en/a0/40084136b5f423e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
Link for posnt installation guide
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
2004s PI installation - help.sap.com:
http://help.sap.com/saphelp_nw04s/helpdata/en/78/f59442062bcd6ae10000000a155106/frameset.htm

HP Cloud Print Driver for Windows Server 2003?

Hello,
I have a unique (complicated) situation that I am trying to find a solution for.
Here is the deal,
My company is trying to set up a temporary remote branch location inside a building where we are unable to wire a network. Our solution is to use a wireless hotspot. Connected to this hotspot, we will have an iPad and an HP Laserjet M525.
The iPad will be connecting to our Citrix environment over VPN through Citrix Receiver to deliver a desktop interface to the iPad. This is needed to access a few applications that are used at the branch.
The problem now is printing, AirPrint wont work because the iPad is on VPN (and its at a windows interface, not the iPad's).
I had the idea of using the HP printers built in ePrint function to print, so I set that up. So now sending at email to [email protected] prints to the HP printer attached to the wireless hotspot.
Emaling to print works, but ideally, I would like this printer to show up in the Windows Devices and Printers, so that the user can just click print, choose the HP printer, and it will print, (with a delay obviously as its sending an email).
So I downloaded the HP ePrint Windows Driver, which has to be installed on the main Citrix servers so that the users session can grab the printer and use it, turns out the driver doesnt work on Windows Server 2003.
My first attempt at a workaround was Google Cloud Print, which was fairly simple to connect to HP ePrint, but apparently the Google Cloud Print Driver doesnt work on Windows Server 2003 either.
Is there a version of the HP ePrint Driver out there that works on Windows Server 2003?
tldr:
I would like to print to a remote HP printer that is connected to a wifi hotspot from our internal network. I need whatever software I download to be compatible with Server 2003.
I understand this is over complicated but thanks for any input.

I believe I understand your issue. You would like to use a print driver to print to your HP ePrint enabled printer from your apps that are hosted by Citrix server. While I believe this makes perfect sense, HP does not have a print driver that officially supports MS TS or Citrix that also supports the ePrint Cloud path. The reason for this is the ePrint windows driver is a "dynamic" print driver (similar to HP UPD dynamic mode) that handles multiple print paths (tcp/ip, wireless direct, cloud, etc) in a single driver instance by dynamically changing the port the print queue is bound to so the port is specific to the delivery path. For example, if printing to a network printer it will use a MS Standard tcp/ip port. If printing to the ePrint cloud a custom port is used, etc. Well, if you have lots of Citrix users trying to print to a single print queue, but to different destinations, the users would be colliding with each other when they print by having the driver trying to change the print queue to different print ports at the same time.
What you could do is install an ePrint print queue on the citrix server if you can control the access to that queue to just your local branch users. Also, if you only have on ePrint enabled printer the situation is even better as only one port will be needed by that queue. You can find the ePrint software at www.hp.com/go/eprintsoftware You might want to download the version of the driver that supports XP as Windows 2003 is very similar print system.
NOTE: this is not a supported environment for this driver. You would be using it without warrenty or support and no promises are being made here.
Good luck if you choose this path and please post back the results. Thanks!

For the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)

Symantec antivirus Best practice for oracle database on windows server 2003

Hi all,
I have an oracle database server on windows server 2003 platform of version 10.2.0.4. what would be best practice of running symantec antivirus on that server as well as database file exclusions from scanning them.
My server had rebooted unexpectedly for many times. in event log i have id as 6008. what may be cause of it..?

Normally, you don't run a virus scanner on a database server because your database server isn't vulnerable to viruses. It's behind firewalls, people aren't reading mail on it, people aren't plugging thumb drives into it, etc. If you do decide that you need to run a virus scanner on a database server, at least exclude the Oracle data files from the scan. Oracle gets very unhappy if someone else tries to open its data files (or, worse, if someone opens a data file before it gets the chance to acquire exclusive access).
Justin

Help:where can i download jdk1.4 amd64-bit for windows server 2003 version?

where can i download jdk1.4 amd64-bit for windows server 2003 version?

Thanks all for your replys.
As I know there is no Crystal Reports 2008 runtimes for 64 bit machines, there are only 32 bit runtimes for that product.So,I need to know when will be the 64 bit runtimes will be released or will be available.
Also,for the CR bundled with VS 2008 (10.5), there are 64 bit runtimes which you could find on your development machine under -
' C:\Program Files\Microsoft SDKs\Windows\v6.0A\Bootstrapper\Packages\CrystalReports10_5\CRRedist2008_x64.msi '
When will be 64 bit runtimes for CR 08 will be available?
Thanks

Invalid Link for 9.2.0.1 EE/SE/S/P/Client 32-bit Windows Server 2003

Similar Messages

Maybe you are looking for