Invalid Locator Segments-The expenditure organization information is invali

Hi Gurus,
Onhand quantity import from legacy to Oracle apps(11.5.10) is failing with the folowing error in the interface table, mtl_transactions_interface.
Error Code: Invalid Locator Segments
Error Explanantion: The expenditure organization information is invalid
I did import successfully during my intial testing cycles though. But now after a month, trying to load the onhand quantities again, I am getting this error. Some setups might have been changed or any thing else could cause this error to show up?
We are using project manufacturing and locator control as "Dynamic". I am using account alias receipt to import onhand balances.
Thanks in advance,
Kaju

Hi,
Please also see these docs.
Note: 837730.1 - MTI Interface "Invalid Locator Segments" Error
Note: 823164.1 - "Material transaction API returned error(Invalid locator segments)" Error when Issue Materials Across Workorders in CMRO
Note: 110424.1 - Unprocessed Transactions/Closing INV Accounting Period FAQ
Note: 210900.1 - Locator is Invalid or Missing for this Item/Organization/Subinventory Combination
Regards,
Hussein

Similar Messages

  • Invoices: the Expenditure Organization is not defaulting

    Hi All,
    Entering project related invoices in the invoice form, In Payables,
    navigate to either Invoices => Entry => Invoices or Invoices => Entry =>
    Invoice Batches, enter project and task information
    BUT
    the Expenditure Organization is not defaulting into the
    form.
    Do you know why this is happening.
    Regards
    Anoop

    You may get what you need from the profile option "PA: Default Expenditure Organization in AP/PO"
    Stephen

  • The expenditure organization is not active for Expense Report

    Greetings to all,
    We ran into a problem, where a person submitted an expense report with project related information. The exp report gets an error in the workflow. When we look at the workflow error message is: This expense report failed payables validation.
    When we look at the notification for error message, shows the expense report and for the line that has a problem, gives the following error message:
    "The expenditure organization is not active."
    We check the org in HRMS, we look up the org and has the following setups:
    HRMS-->work structures--> organization (query the cost center)
    then when looking at the cost center has the following:
    under organization classifications:
    Project Expenditure/Event Organization
    Project Task Owning Organization
    HR Organization
    Then looking at hrms-->organization--->hierarchy
    query for hierarchy-->we get our hierarchy,
    then under organization-->query again for our main org, we see then the subordinates which we see the cost center again.
    Everything looks good our point of view.
    If have researched this issue on ML and have read the following notes: 423267.1, but this does not resolve our issue.
    If someone has encountered this problem, can you share the additional steps to troubleshoot this issue.
    Thanks in advance for any help on this matter.

    All --
    It turns out that the employees were on LOA on the dates that they were charging time. So the message didn't really describe what the actual problem was. What happened is that the employees had gone on LOA and then returned to work, but HR had not yet returned them to active assignment. They entered their timecards as they normally had, but they did not pass validation because they weren't active on the dates they were trying to charge.
    I would have looked at the assignment earlier in the process if the error message had been employee-oriented instead of referring to the org, but at least the problem is solved. Thanks for everybody's input!
    Joe

  • The expenditure organization is not active

    Hi All-
    I've got a strange issue importing timecards from our external system. Approximately fifty records have failed transaction import with an error message of 'The expenditure organization is not active.' The error message makes no sense because I've verified the following:
    The expenditure org is active (no date restrictions)
    The expenditure org is classified as both Project Expenditure/Event and Project Task Owning
    The expenditure org exists in the hierarchy
    I couldn't find any direct hits on Metalink, so I'm wondering if anybody might suggest other possible issues that I'm not seeing? Any other setups I should check?
    Thanks in advance,
    Joe

    All --
    It turns out that the employees were on LOA on the dates that they were charging time. So the message didn't really describe what the actual problem was. What happened is that the employees had gone on LOA and then returned to work, but HR had not yet returned them to active assignment. They entered their timecards as they normally had, but they did not pass validation because they weren't active on the dates they were trying to charge.
    I would have looked at the assignment earlier in the process if the error message had been employee-oriented instead of referring to the org, but at least the problem is solved. Thanks for everybody's input!
    Joe

  • How to disable the sales organization for journals in an activity?

    Hello,
    I had some products created direcly in mySAP CRM (not downloaded from R/3) that don't need - and don't have - sales organization information (They don't even have the "SD" view on them, and represent product families, that are common to many companies, or even services, valid for all sales organizations in the company). Then, althought I created a journal saying that it was not dependent on a sales organization, when I insert this product on the journal, the error message no. CRM_PRODUCT_I419  appers "Product X in sales organization Y.,distribution channel Z not  scheduled ".
    Is there any way I can disable this check of the activity on a journal's product, or something that could prevent this error from happening (apart form inserting the sales organization information on the product?
    The version I use is 4.0
    Thanks in advance!
    With my best regards
    Simone
    Edited by: Simone Pereira on Apr 16, 2008 10:03 PM

    hi
    m sorry i cant send you any screenshots as such  as i m not having SAP on my system.
    but you can go inside the SPRO and there in CRM-->Master Data> Product-----> Product catalog
    inside the catalog you must be having some product specific attributes there.
    just deactivate them if you do not want to use them
    also inside the org model again check whether the journal is org independent or not
    guess it will help
    best regards
    ashish

  • Com.bea.p13n.rules.manager.RuleSetNotFoundException: The rule set with URI /segments/GlobalClassifications.rls could not be located by the class named com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager

    Hi,
    I am getting below exceptions in weblogic portal 10.3.5 which is upgraded from 10.3.4 portal. I have a datasync project .when try to run from workshop(eclipse IDE) getting below error.
    com.bea.p13n.servlets.jsp.JspException: DivTag: The retrieved advice is incomplete. See the processing error list for more information.
    com.bea.p13n.advisor.internal.AdviceImpl@299d48
    Identifier: 1377808035572
    Complete: true
    Last Result: null
    ProcessingError List:
    (1) com.bea.p13n.advisor.internal.ProcessingErrorImpl@1504ee
    Description: Exception evaluating ruleset.
    Source: com.bea.p13n.rules.advislets.RulesAdvisletImpl@e6d518
    Advisor: com.bea.p13n.advisor.internal.AdvisorImpl@b04a4e
    Metadata: com.bea.p13n.common.internal.MetadataImpl@1de62ee
    Name: UnmappedRulesAdvislet
    Description: Advislet that can evalaute a ruleset and return the instantiated objects.
    Author: BEA Systems
    Version: com.bea.p13n.common.internal.VersionImpl@13130a2 Description: WLP 9.2 Number: 9.2, Build Number 1.
    Parameters: {ruleset-name=/segments/GlobalClassifications.rls, ignore-rule-name=false}
    User data: null
    Exception: com.bea.p13n.rules.manager.RuleSetNotFoundException: The rule set with URI /segments/GlobalClassifications.rls could not be located by the class named com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.
    at com.bea.p13n.rules.manager.internal.RuleSetPersistenceManager.getRuleSet(RuleSetPersistenceManager.java:408)
    at com.bea.p13n.rules.manager.internal.ContextPool.<init>(ContextPool.java:149)
    at com.bea.p13n.rules.manager.internal.ContextPoolFactory.getContextPool(ContextPoolFactory.java:214)
    at com.bea.p13n.rules.manager.internal.RulesManagerImpl.getContext(RulesManagerImpl.java:480)
    at com.bea.p13n.rules.manager.internal.RulesManagerImpl.evaluate(RulesManagerImpl.java:353)
    at com.bea.p13n.rules.manager.internal.RulesManagerImpl.evaluateRule(RulesManagerImpl.java:194)
    at com.bea.p13n.rules.manager.internal.RulesManager_jswjkk_EOImpl.__WL_invoke(Unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at com.bea.p13n.rules.manager.internal.RulesManager_jswjkk_EOImpl.evaluateRule(Unknown Source)
    at com.bea.p13n.rules.advislets.RulesAdvisletImpl.getAdvice(RulesAdvisletImpl.java:190)
    at com.bea.p13n.advisor.internal.AdvisorImpl.getAdvice(AdvisorImpl.java:74)
    at com.bea.p13n.advisor.internal.CompoundAdvisletImpl.getAdvice(CompoundAdvisletImpl.java:88)
    at com.bea.p13n.advisor.internal.AdvisorImpl.getAdvice(AdvisorImpl.java:74)
    at com.bea.p13n.advisor.internal.EjbAdvisorImpl.getAdvice(EjbAdvisorImpl.java:62)
    at com.bea.p13n.advisor.internal.EjbAdvisor_t707wa_EOImpl.__WL_invoke(Unknown Source)
    at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
    at com.bea.p13n.advisor.internal.EjbAdvisor_t707wa_EOImpl.getAdvice(Unknown Source)
    at com.bea.p13n.servlets.jsp.taglib.DivTag.includeBody(DivTag.java:103)
    at com.bea.p13n.servlets.jsp.taglib.DivTag.doStartTag(DivTag.java:169)
    at jsp_servlet._portlets._footerlinks.__footerlinks._jspService(__footerlinks.java:247)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
    at org.apache.beehive.netui.pageflow.PageFlowPageFilter.continueChainNoWrapper(PageFlowPageFilter.java:455)
    at org.apache.beehive.netui.pageflow.PageFlowPageFilter.runPage(PageFlowPageFilter.java:432)
    at org.apache.beehive.netui.pageflow.PageFlowPageFilter.doFilter(PageFlowPageFilter.java:284)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
    at com.bea.netuix.servlets.filters.IncludeSecurityFilter.doFilter(IncludeSecurityFilter.java:103)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
    at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:524)
    at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
    at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:558)
    at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:485)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
    at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326)
    at com.bea.netuix.nf.UIControl.render(UIControl.java:582)
    at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:488)
    at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:152)
    at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62)
    at jsp_servlet._framework._skeletons._ceoportal.__flowlayout._jspService(__flowlayout.java:139)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
    at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
    at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
    at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:148)
    at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
    at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
    at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
    at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:326)
    at com.bea.netuix.nf.UIControl.render(UIControl.java:582)
    at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:488)
    at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:152)
    at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62)
    at jsp_servlet._framework._skeletons._ceoportal.__gridlayout._jspService(__gridlayout.java:357)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
    at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:526)
    at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:444)
    at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:148)
    at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
    at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
    at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:481)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
    at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:399)
    at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
    at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:208)
    at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:162)
    at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:465)
    at com.bea.netuix.servlets.manager.UIServlet.processControlTree(UIServlet.java:373)
    at com.bea.netuix.servlets.manager.PortalServlet.service(PortalServlet.java:993)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
    at com.bea.content.manager.servlets.ContentServletFilter.doFilter(ContentServletFilter.java:178)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
    at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
    at com.bea.portal.tools.servlet.http.HttpContextFilter.doFilter(HttpContextFilter.java:60)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
    at com.bea.p13n.servlets.PortalServletFilter.doFilter(PortalServletFilter.java:336)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:60)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3729)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3695)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2285)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2184)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1459)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)

    The following document describes about how datasync data is deployed in various scenarios.
    http://download.oracle.com/docs/cd/E13218_01/wlp/docs100/prodOps/preparing.html#wp1029497
    Assuming you are making use of workshop for creating the user segment and deploying to a single server which is in development mode, I would recommend you check if you have hit any OOM issues on the server or not, and try restarting the server, and redeploying your app. Generally this should resolve the issue.
    If the server to which you are deploying is running in production mode / deploying as an EAR then the above referred doc will guide you on the next steps.

  • I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. Please help

    I am facing a strange problem on new iphone 5 that I bought last week. The maps app and the places in photo gallery shows the pin and my location, however there is no information of locations. Tried to close the apps, phone restart, reset etc. I am accessing it via strong wireless connection and it works fine on other devices. Please help.

    zapgrap wrote:
    there is no information of locations.
    Then no information exists.  Use the Report a Problem button within the app to report it.

  • The procedure entry point GetLogicalProcessor Information could not be located in the dynamic link library KERNEL32.dll

    When I installed CS6 trial version and started from start menu and clicked Adobe photoshop CS6, I get this message.
    The procedure entry point GetLogicalProcessor Information could not be located in the dynamic link library KERNEL32.dll
    How to resolve it?

    Either your OS is damaged, or doesn't meet the minimum requirements for Photoshop CS6.

  • Required a customer field(located in the profitability segment box) as mand

    our client is requested  that the customer field (located in the Profitability Segment box) be a mandatory field for GL accounts which are getting posted directly from FI. This field is needed so that proper reporting can be generated for bad debt and product liability claims. Currently this field is not a mandatory when making journal entries, so there were some postings happened with out customer field. Due to this we are unable to extract exact values in CO-PA reports . Please can some one help me on this and explain the process and settings for this??
    Thanks in advance.
    Regards,
    Venkat

    Hi Eli,
    I have posted note to SAP and i got the below reply from them.
    Get this functionality you should change
    the coding of form DERIVE_CRITERIA_EXTENDED from include RKEVRK2L after
    uninstallation of note 115500(in case you have installed) like this:
    Im Dialogfall (Kontierungspopup) Verprobung ob für Feld
    Mußeingabe erforderlich (Merkmalsgruppe!)
    (nicht f. Faktura, da dort keine Fehlermeldung moeglich)
    if ( xt_criteria-field is initial
    BEGIN OF DELETION *****
    and xt_criteria-status eq '2'
    and not is_status_flags-dialog is initial ) .
    perform send_message using 'KE' 'E' '494'
    END OF DELETION *****
    BEGIN OF INSERTION *****
    and xt_criteria-status eq '2' ) .
    data: l_mtyp type c.
    if not IS_STATUS_FLAGS-DIALOG is initial.
    l_mtyp = 'E'.
    else.
    l_mtyp = 'W'.
    endif.
    perform send_message using 'KE' l_mtyp '494'
    END OF INSERTION *****
    xt_criteria-fieldname
    is_cobl-vorgn
    i_char_group
    endif.
    Afterwards you have to run function module RKE_GENERATE_INTERFACE_ACT
    for your operating concern to update the generated program RK2LXXXX.
    Thanks & Regards,
    Venkat

  • An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

    Hi I m getting the below wxpection when i run test browser from workshop. please help me.
    An unexpected exception occurred while attempting to locate the run-time information for this Web Service. Error: java.lang.reflect.InvocationTargetException:null

    Thamarai,
    Can you provide more information on your jws ? Also can you start the server
    from the command line with verbose option. This will cause
    weblogic_debug.log to be generated in the domain folder.
    Raj Alagumalai
    Backline Workshop Support
    "Thamarai Selvan" <[email protected]> wrote in message
    news:[email protected]..
    Hi I m getting the below wxpection when i run test browser from workshop.please help me.
    >
    An unexpected exception occurred while attempting to locate the run-timeinformation for this Web Service. Error:
    java.lang.reflect.InvocationTargetException:null

  • Error: System.Management.Automation.RemoteException: Federation information could not be received from the external organization.

    Greetings.
    I'm getting 2 errors and 1 warning in the Hybrid Configuration object:
    INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
    ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
    INFO : Session=Tenant Cmdlet=Get-FederationInformation FINISH Time=2620.7003ms
    INFO : Session=Tenant Cmdlet=Get-FederationInformation -DomainName 'SanJuanCiudadPatria.com' -BypassAdditionalDomainValidation: $true START
    ERROR : System.Management.Automation.RemoteException: Federation information could not be received from the external organization.
    INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig START
    INFO : Session=OnPrem Cmdlet=Get-OrganizationConfig FINISH Time=203.229ms
    WARNING : Office 365 was unable to communicate with your on-premises Autodiscover endpoint.  This is typically due to incorrect DNS or firewall configuration.  The Office 365 tenant is currently configured to use the following URL for Autodiscover
    queries from the Office 365 tenant to the on-premises organization - https://autodiscover.SanJuanCiudadPatria.com/autodiscover/autodiscover.svc/WSSecurity. See the following article for further information: http://go.microsoft.com/fwlink/p/?LinkId=275838
    Any help would be greatly appreciated.
    Hello World.

    Hello,
    If the IIS configuration is missing the svc-Integrated handler mapping, the issue may occur. Please try to refer to the following KB to check if the issue can be solved.
    http://support.microsoft.com/kb/2626696
    Please check if there is A record for autodiscover on public DNS server or DNS SRV record.
    Additional blog for your reference.
    http://blogs.technet.com/b/mikehall/archive/2013/08/21/office-365-insight-into-the-hybrid-configuration-wizard-part-2.aspx
    Cara Chen
    TechNet Community Support

  • Specifying  location of the BG processes and  USer logging information

    Good Morning to all ;
    Today the following question raised in our panel . I don't understand what they clearly expect.
    Please provide some information related to this.
    1. How do you specify the location of the BG processes logging information ?
    2. How do you specify the location of the User Processes logging information ?
    - I said ( user process - udump and bgprocess - trace files) - but someone disagree my answer.
    Please correct my answer ..

    Hello ;
    When i am listing bdump , i got (trace files ) related to some background process.
    but i did NOT gather any valid information from here. Some informations unable to understand.
    My ques is " *why this much of trace file associated with BG process ? * - ( without any error)
    $ ls -l
    total 564
    -rw-r----- 1 oracle oinstall 256315 May 14 09:37 alert_orcl.log
    -rw-r----- 1 oracle oinstall 753 Apr 22 17:41 orcl_arc0_29677.trc
    -rw-r----- 1 oracle oinstall 9801 Apr 20 01:41 orcl_arc0_4084.trc
    -rw-r----- 1 oracle oinstall 2790 Apr 19 22:18 orcl_arc0_4088.trc
    -rw-r----- 1 oracle oinstall 620 Apr 19 15:51 orcl_arc0_4255.trc
    -rw-r----- 1 oracle oinstall 620 Apr 19 15:52 orcl_arc0_4319.trc
    -rw-r----- 1 oracle oinstall 1080 Apr 19 15:58 orcl_arc0_4360.trc
    -rw-r----- 1 oracle oinstall 2566 Apr 20 01:41 orcl_arc1_4086.trc
    -rw-r----- 1 oracle oinstall 1063 Apr 19 22:17 orcl_arc1_4090.trc
    -rw-r----- 1 oracle oinstall 620 Apr 19 15:51 orcl_arc1_4257.trc
    -rw-r----- 1 oracle oinstall 650 Apr 19 15:52 orcl_arc1_4321.trc
    -rw-r----- 1 oracle oinstall 709 Apr 19 15:57 orcl_arc1_4362.trc
    -rw-r----- 1 oracle oinstall 817 Apr 19 23:06 orcl_arc2_4088.trc
    -rw-r----- 1 oracle oinstall 817 Apr 19 17:10 orcl_arc2_4092.trc
    -rw-r----- 1 oracle oinstall 789 Apr 19 15:51 orcl_arc2_4259.trc
    -rw-r----- 1 oracle oinstall 817 Apr 19 15:57 orcl_arc2_4364.trc
    -rw-r----- 1 oracle oinstall 899 May 14 09:37 orcl_cjq0_11889.trc
    -rw-r----- 1 oracle oinstall 763 Apr 28 00:29 orcl_cjq0_4027.trc
    -rw-r----- 1 oracle oinstall 1431 May 9 19:01 orcl_cjq0_4047.trc
    -rw-r----- 1 oracle oinstall 735 Apr 19 17:10 orcl_cjq0_4075.trc
    -rw-r----- 1 oracle oinstall 761 May 12 14:19 orcl_cjq0_5145.trc
    -rw-r----- 1 oracle oinstall 761 Apr 26 06:34 orcl_cjq0_5679.trc
    -rw-r----- 1 oracle oinstall 739 Apr 17 00:45 orcl_cjq0_6985.trc
    -rw-r----- 1 oracle oinstall 765 Apr 25 00:55 orcl_cjq0_9044.trc
    -rw-r----- 1 oracle oinstall 821 Apr 6 04:29 orcl_j000_31896.trc
    -rw-r----- 1 oracle oinstall 850 Apr 19 21:55 orcl_j000_4684.trc
    -rw-r----- 1 oracle oinstall 874 Apr 28 10:00 orcl_j000_5245.trc
    -rw-r----- 1 oracle oinstall 876 Apr 23 01:29 orcl_j001_10005.trc
    -rw-r----- 1 oracle oinstall 705 Apr 19 21:55 orcl_j001_4687.trc
    -rw-r----- 1 oracle oinstall 861 Apr 5 23:12 orcl_j002_14209.trc
    -rw-r----- 1 oracle oinstall 704 Apr 19 21:55 orcl_j003_4706.trc
    -rw-r----- 1 oracle oinstall 1140 May 13 20:57 orcl_lgwr_11881.trc
    -rw-r----- 1 oracle oinstall 1003 May 9 19:05 orcl_lgwr_22897.trc
    -rw-r----- 1 oracle oinstall 7523 Apr 6 06:04 orcl_lgwr_27236.trc
    -rw-r----- 1 oracle oinstall 865 Apr 22 17:11 orcl_lgwr_29354.trc
    -rw-r----- 1 oracle oinstall 1003 Apr 22 17:14 orcl_lgwr_29566.trc
    -rw-r----- 1 oracle oinstall 2106 Apr 22 17:46 orcl_lgwr_29657.trc
    -rw-r----- 1 oracle oinstall 1003 May 9 20:43 orcl_lgwr_30425.trc
    -rw-r----- 1 oracle oinstall 1003 Apr 22 17:55 orcl_lgwr_31015.trc
    -rw-r----- 1 oracle oinstall 1031 Apr 22 18:00 orcl_lgwr_31203.trc
    -rw-r----- 1 oracle oinstall 2617 Apr 28 00:44 orcl_lgwr_4019.trc
    -rw-r----- 1 oracle oinstall 1413 May 8 23:17 orcl_lgwr_4039.trc
    -rw-r----- 1 oracle oinstall 1191 Apr 20 01:41 orcl_lgwr_4062.trc
    -rw-r----- 1 oracle oinstall 1029 May 9 21:53 orcl_lgwr_4064.trc
    -rw-r----- 1 oracle oinstall 1135 Apr 19 16:03 orcl_lgwr_4067.trc
    -rw-r----- 1 oracle oinstall 756 Apr 19 15:49 orcl_lgwr_4093.trc
    -rw-r----- 1 oracle oinstall 1165 Apr 28 08:31 orcl_lgwr_4094.trc
    -rw-r----- 1 oracle oinstall 1001 May 9 19:25 orcl_lgwr_4118.trc
    -rw-r----- 1 oracle oinstall 837 Apr 19 15:51 orcl_lgwr_4235.trc
    -rw-r----- 1 oracle oinstall 16746 Apr 5 20:47 orcl_lgwr_4274.trc
    -rw-r----- 1 oracle oinstall 1001 May 12 10:44 orcl_lgwr_4278.trc
    -rw-r----- 1 oracle oinstall 1041 Apr 19 15:52 orcl_lgwr_4286.trc
    -rw-r----- 1 oracle oinstall 1135 Apr 19 15:53 orcl_lgwr_4340.trc
    -rw-r----- 1 oracle oinstall 1139 May 9 22:00 orcl_lgwr_4409.trc
    -rw-r----- 1 oracle oinstall 1001 May 13 10:10 orcl_lgwr_5045.trc
    -rw-r----- 1 oracle oinstall 1206 May 12 12:13 orcl_lgwr_5137.trc
    -rw-r----- 1 oracle oinstall 1029 Apr 26 02:16 orcl_lgwr_5605.trc
    -rw-r----- 1 oracle oinstall 1069 Apr 26 02:18 orcl_lgwr_5671.trc
    -rw-r----- 1 oracle oinstall 784 Apr 12 19:47 orcl_lgwr_6977.trc
    -rw-r----- 1 oracle oinstall 697 Apr 5 19:07 orcl_lgwr_8279.trc
    -rw-r----- 1 oracle oinstall 784 Apr 5 19:09 orcl_lgwr_8391.trc
    -rw-r----- 1 oracle oinstall 697 Apr 5 19:09 orcl_lgwr_8457.trc
    -rw-r----- 1 oracle oinstall 1575 Apr 25 02:44 orcl_lgwr_9036.trc
    -rw-r----- 1 oracle oinstall 784 Apr 10 01:51 orcl_lgwr_9627.trc
    -rw-r----- 1 oracle oinstall 948 May 13 22:30 orcl_m001_19083.trc
    -rw-r----- 1 oracle oinstall 833 May 13 20:49 orcl_mmnl_11893.trc
    -rw-r----- 1 oracle oinstall 697 Apr 19 21:56 orcl_mmnl_4079.trc
    -rw-r----- 1 oracle oinstall 700 Apr 26 05:01 orcl_mmnl_5683.trc
    -rw-r----- 1 oracle oinstall 761 Apr 25 02:38 orcl_mmnl_9048.trc
    -rw-r----- 1 oracle oinstall 700 Apr 5 21:04 orcl_smon_27242.trc
    -rw-r----- 1 oracle oinstall 669 Apr 26 02:17 orcl_smon_5675.trc

  • Invalid access to the memory location

    Hi
    I got the error 998 (Invalid access to the memory location) while tring to connect with Company using DI API.
    What could be the possible reason ?

    Hi Marco,
    I got this error, and I fixed by removing the SM_OBS_DLL folder from the Local Settings Temporal folder in Windows.
    Normally the path is the following:
    “C:\Documents and Settings\  USUARIO  \Local Settings\Temp”
    Hope it helps.
    Emanuel.

  • ERROR 998 - Invalid access to the memory location

    I have the error 998 -Invalid access to the memory location-
    I Tring to connect with Company using DI API.
    Can help me?

    7 years later SAP 8.82 PL08, trying to install Screen Painter and I got this.  What do I do

  • How can I change the organization information on my trust profile?

    I'm re-configuring Lion Server for a company who has changed their name, domain, etc.
    I have everything updated SSL cert, Code signing cert wise to their new name.
    However, the trust profile still has the OLD organization name. How can I change this?

    Go to Settings>General>Reset>Erase all content and settings
    The give him the iPod. It it already has iOS 5 he can set it up via iTunes/USB or wifi. It not then his has to set it up via iTunes/USB. If the iPod is a1G or 2G iPod make sure the iPod is connected to a charging source since the erase can take hours.

Maybe you are looking for