Invalid Message Authenticator in EAP Request
Hi,
I am attemping to configure Infratructure authentication for WDS and WPA/PEAP Client authentication using ACS 4.1(1) Build 23 from an Aironet 1210 running IOS 12.3(8)JEC.
I have a production ACS server that has both LEAP and PEAP enabled under the global configuration options.
The access point has been correctly defined as a NAS using RADIUS-Aironet on the ACS server. The Access point has ACS defined as a RADIUS server and the shared secret set the same as the NAS definition within ACS.
For both WDS Infrastructure authentications(LEAP) and client authentication requests to the access point using PEAP I receive the following message in the ACS failed log:
"Invalid message authenticator in EAP request"
A search on CCO tells me that this is normally the result of a shared secret mismatch. I have however retyped the shared secret several times , and tested with simple strings such as "cisco" and the same result is received. Both the Radius definition on the AP and the NAS definition on ACS have bee re-created with no change in result.
As a test I ran up a clean install of ACS 4.1(1)23 in a VMware session. Configured a NAS object for the AP as I had previously done on the production system and it worked first go.
Would anyone have any clues on what could be wrong with my production ACS. ?
Many Thanks,
Leon
I have a question, when you placed the AAA client under a NDG, was there any Shared Key defined on the NDG level. Because it is an expected behavior, that if you define a Shared Key on the NDG level it over-rides key at the AAA Client level.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/NetCfg.html#wp342738
Refer to Step4.,
"Each device that is assigned to the Network Device Group will use the shared key that you enter here. The key that was assigned to the device when it was added to the system is ignored. If the key entry is null, the AAA client key is used."
Regards,
Prem
Please rate if it helps!
Similar Messages
-
Cisco ISE throws "11036 The Message-Authenticator RADIUS attribute is invalid "
Hello,
I am trying to authenticate my server(running an NMS) with an Cisco ISE with EAP-TLS protocol.
I am seeing "11036 The Message-Authenticator RADIUS attribute is invalid " in the ISE when the ACCESS-REQUEST is sent from NMSServer to ISE. The RADIUS shared secret key is same in both the NMS server and the ISE server .
Is the some java samples for Message authenticator attribute which I can refer. I think, I am missing something in Message authenticator attribute.
Any pointers or suggestions to overcome this ?To login to Prime GUI, the authentication will be done by ISE.
The flow goes like this, Admins will login to Prime GUI with default username/pwd and add the RADIUS/ISE details to it which will be used by prime for authentication/authorization.
Once its done, any other user who tries to login to Prime GUI with their own credentials will be validated against the Identity details in ISE. So even to login to Prime GUI, authentication should be successful in ISE. -
[Cisco ACS] 11036 The Message-Authenticator RADIUS attribute is invalid
Hi,
I got many Cisco AP which are linked to 2 Cisco WLC.
On each WLC, I configured a primary and a secondary RADIUS Server.
RADIUS servers are Cisco ACS 5.2.0.26 (patch 10)
Primary and secondary ACS configurations are synchronized.
There are no problem between primary WLC and Cisco ACS (primary and secondary).
When secondary WLC requests primary Cisco ACS, I get this error "11036 The Message-Authenticator RADIUS attribute is invalid"
Secondary WLC automatically contacts secondary Cisco ACS and it works fine.
Cisco ACS description for this error: "This maybe because of mismatched Shared Secrets."
The two Cisco ACS are synchronized so I should have same error on them...
Why does primary ACS generate this error?
Thanks for your help,
PatrickTarik Admani wrote:Amjad,That is a good observation, shouldnt 7.3 (which recently released) help put these types of issues to rest? I hear that the configuration can now be replicated from one controller to the next in a failover setup.Thanks,Tarik Admani
*Please rate helpful posts*
Yes. That is a good point.
With 7.3 you can use high availability (HA) between two WLCs and you can configure only one WLC (the primary) and all the configuraiotn can be replicated and synched to the other WLC (the secondary).
The two WLCs in the HA must be on same subnet though. Otherwise hot-standby HA between WLCs can't be used.
Rating useful replies is more useful than saying "Thank you" -
Hello everyone:
I know this question have been asked in these forums quite a few times. I apologize if it is a repeat telecast but I was not able to find a suitable solution pertaining to my problem.
I have a AP/SM setup that is configured to get EAP-PEAP authentication from Windows 2012 Server. I have setup everything and have verified that the EAP-PEAP authentication works fine on AP/SM by getting authentication from FreeRADIUS server. Now, when I try
to get authentication from Windows Server, I am getting a reject. The Event log shows this generic message:
Reason Code: 23
Reason:
An error occurred during the Network Policy Server use of the Extensible Authentication Protocol (EAP). Check EAP log files for EAP errors.
There is nothing in the EAP logs that is obvious too:
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4927",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4927",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4928",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,11,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,5,"PEAP_TEST",0,"311 1 10.120.133.1 07/11/2014 00:05:57 4928",30,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,1,"SANDBOX\test","SANDBOX\test",,,,,,"10.120.133.10",5,0,"10.120.133.10","Canopy_AP",,,18,,,,11,"PEAP_TEST",0,"311 1 10.120.133.1
07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
"USIL01PMPTST01","IAS",07/11/2014,11:59:44,3,,"SANDBOX\test",,,,,,,,0,"10.120.133.10","Canopy_AP",,,,,,,11,"PEAP_TEST",23,"311 1 10.120.133.1 07/11/2014 00:05:57 4929",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"PEAP_TEST_CONNECTION",1,,,,
So, basically, the sequence is this:
request , challenge, request , challenge, request, reject
Any idea what might be happening?
Thank you.Hi,
Have you installed certificates on the NPS server properly? Have you selected the proper certificate in the properties of PEAP?
Here is an article about the Certificate requirements of PEAP,
Certificate requirements when you use EAP-TLS or PEAP with EAP-TLS
http://support.microsoft.com/kb/814394
If your certificate matches the requirement, you may try to reinstall the certificate by export and import.
To export a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree under the logical store that contains the certificate to export, click
Certificates.
In the details pane, click the certificate that you want to export.
On the Action menu, point to
All Tasks, and then click Export.
In the Certificate Export Wizard, click No, do not export the private key. (This option will appear only if the private key is marked as exportable and you have access to the private key.)
Provide the following information in the Certificate Export Wizard:
Click the file format that you want to use to store the exported certificate: a DER-encoded file, a Base64-encoded file, or a PKCS #7 file.
If you are exporting the certificate to a PKCS #7 file, you also have the option to include all certificates in the certification path.
If required, in Password, type a password to encrypt the private key you are exporting. In
Confirm password, type the same password again, and then click
Next.
In File name, type a file name and path for the PKCS #7 file that will store the exported certificate and private key. Click
Next, and then click Finish.
To import a certificate, please follow the steps below,
Open the Certificates snap-in for a user, computer, or service.
In the console tree, click the logical store where you want to import the certificate.
On the Action menu, point to
All Tasks, and then click Import to start the Certificate Import Wizard.
Type the file name containing the certificate to be imported. (You can also click
Browse and navigate to the file.)
If it is a PKCS #12 file, do the following:
Type the password used to encrypt the private key.
(Optional) If you want to be able to use strong private key protection, select the
Enable strong private key protection check box.
(Optional) If you want to back up or transport your keys at a later time, select the
Mark key as exportable check box.
Do one of the following:
If the certificate should be automatically placed in a certificate store based on the type of certificate, click
Automatically select the certificate store based on the type of certificate.
If you want to specify where the certificate is stored, select
Place all certificates in the following store, click
Browse, and choose the certificate store to use.
If issue persists, you may try to re-issue the certificate.
For detailed procedure, you may refer to the similar threads below,
Having issues getting PEAP with EAP-MSCHAP v2 working on Windows 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c66cf0a8-24dd-4ccd-b5bb-16bd28ad8d4c/having-issues-getting-peap-with-eapmschap-v2-working-on-windows-2008-r2?forum=winserverNAP
Hope this helps.
Steven Lee
TechNet Community Support -
General invalidation message processing exception (WWC-40018)
Hi.
I am facing this problem with my portal when I try to change any item and when accessing some tabs, like the access tab:
General invalidation message processing exception: User-Defined Exception (WWC-40018)
General invalidation message processing exception: Error invalidating content, Non-200 status code returned by Web Cache. Status: 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy service is denied. ) (WWC-40018)
I tried and tried and tried all of the solutions in all of Oracle Forums, but no one fix the problem.
I will be very glade to have a solution.
And thankshi,
it would be interesting which portal version you are currently using. if you are on an older version like 9.0.4.x the following metalink note might help:
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=293018.1
regards,
christian -
When trying to launch iTunes on my PC running Windows 7 it freezes and I get the message: "Authentication Required. To access this site you need to log in to area "100656 on mellor.co. Your password will be sent in the clear." Because iTunes is frizen at this point I am unable to enter a username or password, or in fact do anything. Please help!! I have uninstalled and reinstalled iTunes numerous times as well as attempting all of the fixes that I could find on-line and still no joy.
That sounds extremely phishy to me... iTunes does not require authentication simply to launch it. I suspect you've got something nasty intercepting network traffic. That server may be set up to log the Apple ID that you enter so it can be used fraudulently. Try ComboFix from Bleeping Computer.
FWIW the domain mellor.co is registered to an accountants in Knutsford, Cheshire, UK, and produces the same authentication request if visited with a browser. There is no sign of a "real" publicly visible website at that domain which is a somewhat odd.
tt2 -
400 Bad Request - Invalid path /b2c/secure was requested
Hi,
I have two jsp pages. first page is included as a link in one of the inc.jsp in B2C application.
This page has few input fields and upon submit button. I get error message
400 Bad Request - Invalid path /b2c/secure was requested
the action tag written in config.xml is like:
<action path="/b2c/xyz" type="package_name.xyz">
<forward name="success" path="/b2c/Page2.jsp"/>
<forward name="failure" path="/b2c/Page2.jsp"/>
</action>
in web.xml:
<servlet>
<servlet-name>Page1.jsp</servlet-name>
<jsp-file>/b2c/Page1.jsp</jsp-file>
</servlet>
<servlet>
<servlet-name>Page2.jsp</servlet-name>
<jsp-file>/b2c/Page2.jsp</jsp-file>
</servlet>
Please let me know if you could help me with the needful. Appreciate your earliest response.Hi Bharathi,
If you are embedding a link in jsp where you are directly calling another jsp, its always better to code it like this
<a href="<isa:webappsURL name="/b2c/Page1.jsp"/>" target="_new">
There is no need to make any changes in web.xml file.
If in your inc.jsp you want to call an action class on click on a link than call a javascript method onclick on that link
test() is a javascript method where you will call your action class like
function test() {
isaTop().parent.location.href="<isa:webappsURL name='/b2c/xyz1.do'/>";
Changes in config.xml should be like
<action path="/b2c/xyz1" type="package_name.xyz">
<forward name="success" path="/b2c/Page2.jsp"/>
<forward name="failure" path="/b2c/Page2.jsp"/>
</action>
Make use of "<isa:webappsURL name='/test/test.jsp'/>" and it will work. Hope this helps you.
Regards,
Arshi
Edited by: Arshi Arshi on Oct 3, 2009 9:50 AM -
Essbase Add-In : "Invalid Command 11607 Received in Request Manager"
Hi All,
I am getting the following Error when I am using Member Selection Property in Essbase Add - In
"Invalid Command 11607 Received in Request Manager"
Environment :
Essbase 6.5
MS Excel 2000
Please Help...Thanks in Advance
Regards,
SonuWe have Hyperion Planning version 3.0.0 installed in the system.
Also while connecting from Excel with the server we get a warning message stating " The version of Essbase(65000) is older than the version of the Essbase API(65200) you are using".
If we proceed further, we are able to connect to the application and retrieve the dimensions and the members. But the "Member Selection" and the "Find" property doesn't work throwing the error message "Invalid Command 11607 Received in Request Manager".
Please help...
Raja -
Error(1013011) Invalid Command 10099 Received in Request Manager
This error message appears both in the server and the app log files. It 'freezes' Essbase ( we can no longer communicate with Essbase and any other cube ). The only thing to do is to 'kill' the ESSSVR process (Unix). We are running the 6.1 patch3a version but I found in the archives such a problem with the 5.02.Hyperion suggested to set the following parameters in the cfg file but it didn't work...NETDELAY 500NETRETRYCOUNT 1000__SM__BUFFERED_IO TRUE__SM__WAITED_IO TRUEPlease somebody help !
We have Hyperion Planning version 3.0.0 installed in the system.
Also while connecting from Excel with the server we get a warning message stating " The version of Essbase(65000) is older than the version of the Essbase API(65200) you are using".
If we proceed further, we are able to connect to the application and retrieve the dimensions and the members. But the "Member Selection" and the "Find" property doesn't work throwing the error message "Invalid Command 11607 Received in Request Manager".
Please help...
Raja -
802.1x wired EAP requestes dropped by clients
Dears,
i am facing the following problems with most of my windows 7 machines in the network.
we have an Aruba CPPM NAC solution that we integrated with our Domain Controller.
Once a windows 7 clients try to connect to the network everything works well then after a couple of seconds the client a disconnected. i did some sniffing on the network and found that the authentication is working well and the NAC starts sending EAP requests
to the client and the client answers with EAP replies. everything works well for the first 4 requests then when the 5th request is sent to the client, the client drops it and no replies are sent back to the NAC solution.
it's a very weird problem and can't understand why it's always on the 5th EAP request the client stops replying.
I tried formatting one of the PCs and joining it to the domain and testing the solution, everything went well but it won't be possible for me to format 2000 PCs to get the solution running.
is it possible to get your support with this issue?
regards,
Joseph Salameh.Hi,
In some cases, routers or firewalls drop packets because they are configured to discard packets that require fragmentation.
Did you use NPS for authentication?
Follow this procedure to lower the maximum size that NPS uses for EAP payloads by adjusting the Framed-MTU attribute in a network policy.
Configure the EAP Payload Size
http://technet.microsoft.com/en-us/library/cc755205%28v=ws.10%29
Hope this helps. -
Cuci moc fails "Invalid CCMCIP authentication server configuration"
Installed the cuci moc add-in for my OCS R2 client but when trying to connect it fails.
The server status notification popup shows the following message:
Unknown Error.
[DeviceAdaptorInitiazationFailed] Invalid CCMCIP authentication server configuration. [1200]
Any help is welcome.
ThxIssue has been resolved.
I downloaded the latest version of the cuci-moc software which only included the software.
The previous version 7.1.2.zip also included a cucimoc-Admin-ffr.7-1-2.zip, which has the Administration Toolkit.
This toolkit also included registry update and .adm files for policy setting.
CUCIMOC-CUCSFAdminData_GroupPolicy.reg
CUCIMOC-CUCSFAdminData_GroupPolicy.adm
I am now able to connect and can toggle between softphone and deskphone.
Thx for your support, -
Help with configuring AP-1240AG as local authenticator for EAP-FAST client
Hi,
I am trying to configure an AP-1240AG as a local authenticator for a Windows XP client with no success. Here is a part of the AP configuration:
dot11 lab_test
authentication open eap eap_methods
authentication network-eap eap_methods
guest-mode
infrastructure-ssid
radius-server local
eapfast authority id 0102030405060708090A0B0C0D0E0F10
eapfast authority info lab
eapfast server-key primary 7 211C7F85F2A6056FB6DC70BE66090DE351
user georges nthash 7 115C41544E4A535E2072797D096466723124425253707D0901755A5B3A370F7A05
Here is the Windows XP client configuration:
Authentication: Open
Encrpytion WEP
Disable Cisco ccxV4 improvements
username: georges
password: georges
Results: The show radius local-server statistics does not show any activity for the user georges and the debug messages are showing the following:
*Mar 4 01:15:58.887: %DOT11-7-AUTH_FAILED: Station 0016.6f68.b13b Authentication failed
*Mar 4 01:16:28.914: %DOT11-7-AUTH_FAILED: Station 0016.6f68.b13b Authentication failed
*Mar 4 01:16:56.700: RADIUS/ENCODE(00001F5C):Orig. component type = DOT11
*Mar 4 01:16:56.701: RADIUS: AAA Unsupported Attr: ssid [263] 19
*Mar 4 01:16:56.701: RADIUS: [lab_test]
*Mar 4 01:16:56.701: RADIUS: 65 [e]
*Mar 4 01:16:56.701: RADIUS: AAA Unsupported Attr: interface [156] 4
*Mar 4 01:16:56.701: RADIUS: 38 32 [82]
*Mar 4 01:16:56.701: RADIUS(00001F5C): Storing nasport 8275 in rad_db
*Mar 4 01:16:56.702: RADIUS(00001F5C): Config NAS IP: 10.5.104.22
*Mar 4 01:16:56.702: RADIUS/ENCODE(00001F5C): acct_session_id: 8026
*Mar 4 01:16:56.702: RADIUS(00001F5C): sending
*Mar 4 01:16:56.702: RADIUS/DECODE: parse response no app start; FAIL
*Mar 4 01:16:56.702: RADIUS/DECODE: parse response; FAIL
It seems that the radius packet that the AP receive is not what is expected. Do not know if the problem is with the client or with the AP configuration. Try many things but running out of ideas. Any suggestions would be welcome
ThanksHi Stephen,
I do not want to create a workgroup bridge, just want to have the wireless radio bridge with the Ethernet port. I will remove the infrastructure command.
Thanks for your help
Stephane
Here is the complete configuration:
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname Lab
ip subnet-zero
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
dot11 lab_test
authentication open eap eap_methods
authentication network-eap eap_methods
guest-mode
infrastructure-ssid
power inline negotiation prestandard source
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
ssid lab_test
traffic-metrics aggregate-report
speed basic-54.0
no power client local
channel 2462
station-role root
antenna receive right
antenna transmit right
no dot11 extension aironet
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
shutdown
dfs band 3 block
speed basic-6.0 9.0 basic-12.0 18.0 basic-24.0 36.0 48.0 54.0
channel dfs
station-role root
no dot11 extension aironet
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
hold-queue 160 in
interface BVI1
ip address 10.5.104.22 255.255.255.0
ip default-gateway 10.5.104.254
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server local
eapfast authority id 000102030405060708090A0B0C0D0E0F
eapfast authority info LAB
eapfast server-key primary 7 C7AC67E296DF3437EB018F73BE00D822B8
user georges nthash 7 14424A5A555C72790070616C03445446212202080A75705F513942017A76057007
control-plane
bridge 1 route ip
line con 0
line vty 0 4
end -
wireless authentication not working
I found the following in the radius
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 1/15/2014 2:07:57 AM
Event ID: 6273
Task Category: Network Policy Server
Level: Information
Keywords: Audit Failure
User: N/A
Computer: NAP01.test.local
Description:
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: doamin \user.a
Account Name: user.a
Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: 00-0F-7D-C4-45-20:staff
Calling Station Identifier: 0C-74-C2-EF-Dd-0B
NAS:
NAS IPv4 Address: 192.168.9.10
NAS IPv6 Address: -
NAS Identifier: -
NAS Port-Type: Wireless - IEEE 802.11
NAS Port: 497
RADIUS Client:
Client Friendly Name: wcont1
Client IP Address: 192.168.9.10
Authentication Details:
Connection Request Policy Name: Wireless
Network Policy Name: wism
Authentication Provider: Windows
Authentication Server: NAP01.test.local
Authentication Type: EAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 22
Reason: The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.
Please helpHi,
Anything updates?
In addition, this issue may also because your client didn't have CA certificate of your domain. Please make sure that your client has CA certificate.
Besides, the error "The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server" may be due to that the default maximum transmission unit that NPS uses for EAP payloads is 1500
bytes. You can lower the maximum size that NPS uses for EAP payloads by adjusting the Framed-MTU attribute in a network policy to a value no greater than 1344:
Configure the EAP Payload Size
Best regards,
Susie -
I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?
I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
Thank you. -
I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." Been to Apple Store - no luck instore, or with Super genius over the phone when with genius in store, taking data in real time via ethernet!
I had to do a full wipe of my system because of time machine back up issues 2 weeks ago, and the error has only occured at some point since then. I only did a drag and drop of my user account folders/files into an External HDD rather than a copy of my user account (advised by the staff in store at Apple to do this) and when reimported, the Mail folders are all present but each message is in a sub-sub-sub folder that is numerically named. I do not have a mirror image of the hard disk prior to the wipe, only a time machine back up from 2 weeks prior to it being done. I am uncertain if this reinstall has caused the issue.
I am not happy to upgrade the software in my iPhone until I have the calendars working. I have purchased Mountain Lion, but again am concerned about upgrading until the issues are sorted.
I have tried the other solutions on here with no luck. HELP please.
Many Thanks.Progress Update.
I made a back of what existing phtos and Videos I had on my Iplhone. I used Image capture to do this making an entire back up of photos and videoa that were still intact on the phone.
Image capture is god for this purpose, as it does exactly what you ask it to do without applying any rules or squishing the files back into iphote (which might also be corupted)
Image capture wil do the basic function of retriving the contents of the phone and save them as native files on your hard drive.
Once I did this I erased my iphone, and re intitialised it restoring an older back up from icloud.
As the retore was happneing - I did retreive the missing files that cuased the intial beviour as above, and I could play the videos that were missing in the above scenerio. The wierd ting was however that even though the source files were now back on the device, the thumbnail previews were missing. Where I ahd balck thumb nails for server portions of the resotred content.
I then went to bed as the restore is a long process. When I woke up the library had library had cleaned itself up. Mysteriously the prcess had deleted the files missing the their thumbnails.
This is very perculiar and bad behavior.
I am now repeating the process, and will attempt to download the missing content as it is restored and prior to the phone trying to fix itself.
Here are the lessons learned.
DO NOT rely on Photo Stream to keep back ups and synchornise videos from you IOS device. IT DOES NOT SUPPORT THIS CAPBILITY
DO NOT rely on iCloud Back Up alone - always fd an occassional iTunes back up or more reliably still always take a back up of photos and video files using Image Capture to be doubly sure that you a have backd up any content.
DO THIS NOW - dont wait to loose your phone ofr have your phone repaired by replacement at the apple Store. (I did both :-(
Maybe you are looking for
-
BONJOUR: I can't update Itunes because it keeps saying i don't have "sufficiant priviledges". When i go into properties, it's set to disabled. When i try to change it to automatic it say "scheduled for deletion". HELP
-
How do I add music to a school owned iPad 2?
I have an iPad 2, that my school has loaned out to me. When I connect the iPad to my computer the actual iPad says, "Not connected", and iTunes says, "this iPad is supervised by another computer and cannot be used with this computer. Is there a way t
-
Data elements in Idoc segments
Hi Experts, Is there a way to get the list of Idoc segments in which a particular data element is used. Regards, Sridevi
-
Late 2011 macbook pro not mirroring
Hi, I have a late 2011 macbook pro 13"(I checked the serial number). osx 10.7.5. Apple tv 3 (md199LL/A) version 5.2.1. and i still dont' see the airplay symbol at the top of my screen. I can airplay from itunes, but not mirror my screen. Any ideas?
-
Elements 11 stops responding when using lasso tool
After creating layers of picture, I go to use the lasso tool and begin to draw around part I want. The Elements 11 stops responding and I start over. Any thoughts. Thanks. Bill