Invalid Operation Code: "19"

I've created a HDTV 1080p (24fps) comp in After Effects that I've rendered to H.264 Blu-Ray format.
I import the file into Encore and tested out my project - everything seems fine.
When I go to burn my Blu-Ray I'm getting this error:
Blu-Ray Object: "my blu-ray", Error: "invalid operation", Code: "19", Note: "primary video attributes must be consistent withint playlist"
Can anyone give me any tips on what causes this error or if I might be doing something incorrect...
-Foo

It would seem that there is more than one cause for this error, as different workarounds have been used to solve it by others.
The most recent I recall is to quit, saving the project, and then to relaunch Encore and try again. Have you tried that?

Similar Messages

Blu-ray Error: "invalid operation", Code: "19", Note: "primary video stream attributes must be consi

When i try make a blu Ray (folder or image) i receive this error "
Blu-ray Object: "<Timeline>Untitled Timeline", Error: "invalid operation", Code: "19", Note: "primary video stream attributes must be consistent with playList"
is a specific error for blu ray?
Whats happen?.
Thanks a lot
If I create a dvd, all is right, no error are showed a dvd folder is created

Hello:
Finally I could make the Blu Ray disc.
The problem was in put in the same timeline two files in mpg format and psd file with 6 seconds of duration.
(no compatible timeline, causes error code 19)
For a right process a put each file in sperate timeline and end action link to the next file, Then, all go right an BR plays fine.
Maybe there was somthing diferent inside each mpg file , incompatble for a same timeline.
The mpg files were extratecd from dvd (vob files)
I hope that my exprerince help in the future to others persons with the same problems
Thanks all for support
Regards

What are the values for operation code in order import open interface

Hi,
I am trying to create the sales order by populating the interface table and run the request import order i.e. open interace without standard OE APIs.
I am also populating the actions interface table i.e. OE_ACTIONS_IFACE_ALL along with header, line, & price adjustment tables to hold the order. The sales order creates successfully but it fails at holding action due to invalid operation code. It has been tried with ‘CREATE’, ‘UPDATE, ‘INSERT’ for operation code in action interface table but no use.
So my concern is what value needs to pass for operation code in action interface table.
Any help would appreciate.
Thanks,
Sai Krishna

If you are planning to apply holds, For holds the action is OE_Globals.G_APPLY_HOLD or APPLY_HOLD.
Thanks
Nagamohan

DataTable Exception: Invalid operation for the current cursor position

I have a JSF application that lists rows from a view in a SQL Server database. I have set up a commandLinks in an extra columns.
The data is displayed properly, but when I select one of the commandLinks I get the "Invalid operation for the current cursor position" exception.
Here's the source
Domain.jsp
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <f:view>
        <html lang="en-US" xml:lang="en-US">
            <head>
                <meta content="no-cache" http-equiv="Cache-Control"/>
                <meta content="no-cache" http-equiv="Pragma"/>
                <title>Page1 Title</title>
                <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
            </head>
            <body style="-rave-layout: grid">
                <h:form binding="#{Domains.form1}" id="form1">
                    <h:dataTable binding="#{Domains.dataTable1}" headerClass="list-header" id="dataTable1" rowClasses="list-row-even,list-row-odd"
                        value="#{Domains.dataTable1Model}" var="currentRow">
                        <h:column binding="#{Domains.column9}" id="column9">
                            <h:selectBooleanCheckbox binding="#{Domains.checkbox2}" id="checkbox2"/>
                            <f:facet name="header">
                                <h:outputText binding="#{Domains.outputText9}" id="outputText9" value="Select"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{Domains.column10}" id="column10">
                            <f:facet name="header">
                                <h:outputText binding="#{Domains.outputText4}" id="outputText4" value="Name"/>
                            </f:facet>
                            <h:commandLink action="#{Domains.groupList}" binding="#{Domains.linkAction1}" id="linkAction1">
                                <h:graphicImage binding="#{Domains.image1}" id="image1" url="resources/images/domain16.gif" value="resources/images/domain16.gif"/>
                                <h:outputText binding="#{Domains.linkAction1Text}" id="linkAction1Text" value="#{currentRow['name']}"/>
                            </h:commandLink>
                        </h:column>
                        <h:column binding="#{Domains.column3}" id="column3">
                            <h:outputText binding="#{Domains.outputText5}" id="outputText5" value="#{currentRow['description']}"/>
                            <f:facet name="header">
                                <h:outputText binding="#{Domains.outputText6}" id="outputText6" value="Description"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{Domains.column4}" id="column4">
                            <h:selectBooleanCheckbox binding="#{Domains.checkbox1}" id="checkbox1" value="#{Domains.domainviewRowSet.currentRow['enabled']}==1"/>
                            <f:facet name="header">
                                <h:outputText binding="#{Domains.outputText8}" id="outputText8" value="Enabled"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{Domains.column7}" id="column7">
                            <h:outputText binding="#{Domains.outputText13}" id="outputText13" value="#{currentRow['userCount']}"/>
                            <f:facet name="header">
                                <h:outputText binding="#{Domains.outputText14}" id="outputText14" value="Users"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{Domains.column8}" id="column8">
                            <h:outputText binding="#{Domains.outputText15}" id="outputText15" value="#{currentRow['groupCount']}"/>
                            <f:facet name="header">
                                <h:outputText binding="#{Domains.outputText16}" id="outputText16" value="Groups"/>
                            </f:facet>
                        </h:column>
                        <h:column binding="#{Domains.column5}" id="column5">
                            <f:facet name="header">
                                <h:outputText binding="#{Domains.outputText17}" id="outputText17" value="Actions"/>
                            </f:facet>
                            <h:commandLink action="#{Domains.editDomain}" binding="#{Domains.linkAction2}" id="linkAction2">
                                <h:graphicImage binding="#{Domains.image2}" id="image2" title="Edit" value="resources/images/edit.gif"/>
                            </h:commandLink>
                            <h:commandLink binding="#{Domains.linkAction3}" id="linkAction3">
                                <h:graphicImage binding="#{Domains.image3}" id="image3" title="View" url="resources/images/view.gif" value="resources/images/view.gif"/>
                            </h:commandLink>
                            <h:commandLink binding="#{Domains.linkAction4}" id="linkAction4">
                                <h:graphicImage binding="#{Domains.image4}" id="image4" title="Delete" value="resources/images/delete.gif"/>
                            </h:commandLink>
                        </h:column>
                    </h:dataTable>
                </h:form>
            </body>
        </html>
    </f:view>
</jsp:root>
Domains.java
* Page1.java
* Created on October 28, 2004, 12:45 PM
* Copyright Gordon.Bell
package usergroupmgt;
import javax.faces.*;
import com.sun.jsfcl.app.*;
import javax.faces.component.html.*;
import com.sun.jsfcl.data.*;
import javax.faces.component.*;
import com.sun.sql.rowset.*;
import javax.faces.convert.*;
public class Domains extends AbstractPageBean {
    // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
    private int __placeholder;
    private HtmlForm form1 = new HtmlForm();
    public HtmlForm getForm1() {
        return form1;
    public void setForm1(HtmlForm hf) {
        this.form1 = hf;
    private HtmlDataTable dataTable1 = new HtmlDataTable();
    public HtmlDataTable getDataTable1() {
        return dataTable1;
    public void setDataTable1(HtmlDataTable hdt) {
        this.dataTable1 = hdt;
    private JdbcRowSetXImpl domainviewRowSet = new JdbcRowSetXImpl();
    public JdbcRowSetXImpl getDomainviewRowSet() {
        return domainviewRowSet;
    public void setDomainviewRowSet(JdbcRowSetXImpl jrsxi) {
        this.domainviewRowSet = jrsxi;
    private HtmlOutputText outputText4 = new HtmlOutputText();
    public HtmlOutputText getOutputText4() {
        return outputText4;
    public void setOutputText4(HtmlOutputText hot) {
        this.outputText4 = hot;
    private UIColumn column3 = new UIColumn();
    public UIColumn getColumn3() {
        return column3;
    public void setColumn3(UIColumn uic) {
        this.column3 = uic;
    private HtmlOutputText outputText5 = new HtmlOutputText();
    public HtmlOutputText getOutputText5() {
        return outputText5;
    public void setOutputText5(HtmlOutputText hot) {
        this.outputText5 = hot;
    private HtmlOutputText outputText6 = new HtmlOutputText();
    public HtmlOutputText getOutputText6() {
        return outputText6;
    public void setOutputText6(HtmlOutputText hot) {
        this.outputText6 = hot;
    private UIColumn column4 = new UIColumn();
    public UIColumn getColumn4() {
        return column4;
    public void setColumn4(UIColumn uic) {
        this.column4 = uic;
    private HtmlOutputText outputText8 = new HtmlOutputText();
    public HtmlOutputText getOutputText8() {
        return outputText8;
    public void setOutputText8(HtmlOutputText hot) {
        this.outputText8 = hot;
    private UIColumn column7 = new UIColumn();
    public UIColumn getColumn7() {
        return column7;
    public void setColumn7(UIColumn uic) {
        this.column7 = uic;
    private HtmlOutputText outputText13 = new HtmlOutputText();
    public HtmlOutputText getOutputText13() {
        return outputText13;
    public void setOutputText13(HtmlOutputText hot) {
        this.outputText13 = hot;
    private HtmlOutputText outputText14 = new HtmlOutputText();
    public HtmlOutputText getOutputText14() {
        return outputText14;
    public void setOutputText14(HtmlOutputText hot) {
        this.outputText14 = hot;
    private UIColumn column8 = new UIColumn();
    public UIColumn getColumn8() {
        return column8;
    public void setColumn8(UIColumn uic) {
        this.column8 = uic;
    private HtmlOutputText outputText15 = new HtmlOutputText();
    public HtmlOutputText getOutputText15() {
        return outputText15;
    public void setOutputText15(HtmlOutputText hot) {
        this.outputText15 = hot;
    private HtmlOutputText outputText16 = new HtmlOutputText();
    public HtmlOutputText getOutputText16() {
        return outputText16;
    public void setOutputText16(HtmlOutputText hot) {
        this.outputText16 = hot;
    private HtmlSelectBooleanCheckbox checkbox1 = new HtmlSelectBooleanCheckbox();
    public HtmlSelectBooleanCheckbox getCheckbox1() {
        return checkbox1;
    public void setCheckbox1(HtmlSelectBooleanCheckbox hsbc) {
        this.checkbox1 = hsbc;
    private UIColumn column5 = new UIColumn();
    public UIColumn getColumn5() {
        return column5;
    public void setColumn5(UIColumn uic) {
        this.column5 = uic;
    private UIColumn column9 = new UIColumn();
    public UIColumn getColumn9() {
        return column9;
    public void setColumn9(UIColumn uic) {
        this.column9 = uic;
    private HtmlSelectBooleanCheckbox checkbox2 = new HtmlSelectBooleanCheckbox();
    public HtmlSelectBooleanCheckbox getCheckbox2() {
        return checkbox2;
    public void setCheckbox2(HtmlSelectBooleanCheckbox hsbc) {
        this.checkbox2 = hsbc;
    private HtmlOutputText outputText9 = new HtmlOutputText();
    public HtmlOutputText getOutputText9() {
        return outputText9;
    public void setOutputText9(HtmlOutputText hot) {
        this.outputText9 = hot;
    private UIColumn column10 = new UIColumn();
    public UIColumn getColumn10() {
        return column10;
    public void setColumn10(UIColumn uic) {
        this.column10 = uic;
    private RowSetDataModel dataTable1Model = new RowSetDataModel();
    public RowSetDataModel getDataTable1Model() {
        return dataTable1Model;
    public void setDataTable1Model(RowSetDataModel rsdm) {
        this.dataTable1Model = rsdm;
    private BooleanConverter booleanConverter1 = new BooleanConverter();
    public BooleanConverter getBooleanConverter1() {
        return booleanConverter1;
    public void setBooleanConverter1(BooleanConverter bc) {
        this.booleanConverter1 = bc;
    private HtmlCommandLink linkAction1 = new HtmlCommandLink();
    public HtmlCommandLink getLinkAction1() {
        return linkAction1;
    public void setLinkAction1(HtmlCommandLink hcl) {
        this.linkAction1 = hcl;
    private HtmlOutputText linkAction1Text = new HtmlOutputText();
    public HtmlOutputText getLinkAction1Text() {
        return linkAction1Text;
    public void setLinkAction1Text(HtmlOutputText hot) {
        this.linkAction1Text = hot;
    private HtmlGraphicImage image1 = new HtmlGraphicImage();
    public HtmlGraphicImage getImage1() {
        return image1;
    public void setImage1(HtmlGraphicImage hgi) {
        this.image1 = hgi;
    private HtmlCommandLink linkAction2 = new HtmlCommandLink();
    public HtmlCommandLink getLinkAction2() {
        return linkAction2;
    public void setLinkAction2(HtmlCommandLink hcl) {
        this.linkAction2 = hcl;
    private HtmlGraphicImage image2 = new HtmlGraphicImage();
    public HtmlGraphicImage getImage2() {
        return image2;
    public void setImage2(HtmlGraphicImage hgi) {
        this.image2 = hgi;
    private HtmlCommandLink linkAction3 = new HtmlCommandLink();
    public HtmlCommandLink getLinkAction3() {
        return linkAction3;
    public void setLinkAction3(HtmlCommandLink hcl) {
        this.linkAction3 = hcl;
    private HtmlGraphicImage image3 = new HtmlGraphicImage();
    public HtmlGraphicImage getImage3() {
        return image3;
    public void setImage3(HtmlGraphicImage hgi) {
        this.image3 = hgi;
    private HtmlCommandLink linkAction4 = new HtmlCommandLink();
    public HtmlCommandLink getLinkAction4() {
        return linkAction4;
    public void setLinkAction4(HtmlCommandLink hcl) {
        this.linkAction4 = hcl;
    private HtmlGraphicImage image4 = new HtmlGraphicImage();
    private HtmlOutputText outputText17 = new HtmlOutputText();
    public HtmlOutputText getOutputText17() {
        return outputText17;
    public void setOutputText17(HtmlOutputText hot) {
        this.outputText17 = hot;
    public HtmlGraphicImage getImage4() {
        return image4;
    public void setImage4(HtmlGraphicImage hgi) {
        this.image4 = hgi;
    // </editor-fold>
    public Domains() {
        // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
        try {
            domainviewRowSet.setDataSourceName("java:comp/env/jdbc/HBird");
            domainviewRowSet.setCommand("SELECT ALL dbo.DomainView.id, dbo.DomainView.name, dbo.DomainView.description, dbo.DomainView.enabled, dbo.DomainView.created, dbo.DomainView.modified, dbo.DomainView.userCount, dbo.DomainView.groupCount FROM dbo.DomainView");
            dataTable1Model.setDataCacheKey("com.sun.datacache.Domains.domainviewRowSet");
            dataTable1Model.setRowSet(domainviewRowSet);
            dataTable1Model.setSchemaName("");
            dataTable1Model.setTableName("");
        } catch (Exception e) {
            log("Page1 Initialization Failure", e);
            throw e instanceof javax.faces.FacesException ? (FacesException) e : new FacesException(e);
        // </editor-fold>
        // Additional user provided initialization code
//        try {
//            domainviewRowSet.execute();
//            domainviewRowSet.next();
//        } catch (Exception ex) {
//            throw new FacesException(ex);
    protected usergroupmgt.ApplicationBean1 getApplicationBean1() {
        return (usergroupmgt.ApplicationBean1)getBean("ApplicationBean1");
    protected usergroupmgt.SessionBean1 getSessionBean1() {
        return (usergroupmgt.SessionBean1)getBean("SessionBean1");
     * Bean cleanup.
    protected void afterRenderResponse() {
        domainviewRowSet.close();
    public String groupList() {
        // User event code here...
        return "groupList";
    public String editDomain() {
        // User event code here...
        return "editDomain";
}and the exception stack:
Stack trace:
com.sun.jsfcl.data.ResultSetPropertyResolver$RowData.getData(Unknown Source)
com.sun.jsfcl.data.ResultSetPropertyResolver.getValue(Unknown Source)
com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:167)
com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:151)
com.sun.faces.el.MixedELValueBinding.getValue(MixedELValueBinding.java:80)
javax.faces.component.UIOutput.getValue(UIOutput.java:147)
javax.faces.component.UIInput.validate(UIInput.java:639)
javax.faces.component.UIInput.executeValidate(UIInput.java:838)
javax.faces.component.UIInput.processValidators(UIInput.java:412)
javax.faces.component.UIData.iterate(UIData.java:969)
javax.faces.component.UIData.processValidators(UIData.java:781)
javax.faces.component.UIForm.processValidators(UIForm.java:170)
javax.faces.component.UIComponentBase.processValidators(UIComponentBase.java:904)
javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:342)
com.sun.faces.lifecycle.ProcessValidationsPhase.execute(ProcessValidationsPhase.java:78)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:324)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
java.security.AccessController.doPrivileged(AccessController.java:-2)
javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:236)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:145)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:141)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:214)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:168)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:144)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:133)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:539)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:254)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:114)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:936)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:165)
org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:683)
org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:604)
org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:542)
org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:647)
java.lang.Thread.run(Thread.java:534)Any help is appreciated.

Hi,
Looks like some inconsistency in the jsp source:
in the 2nd link the url property is set. I don't think
you need to set this.
I couldn't tell what action you want to occur when you
click. If you want some action to occur such as
navigating to another page then you can use Page Navigation. Then you would need an action handler
for the LinkAction component.
<h:commandLink action="#{Domains.editDomain}" binding="#{Domains.linkAction2}" id="linkAction2">
<h:graphicImage binding="#{Domains.image2}" id="image2" title="Edit" value="resources/images/edit.gif"/>
</h:commandLink>
<h:commandLink binding="#{Domains.linkAction3}" id="linkAction3">
<h:graphicImage binding="#{Domains.image3}" id="image3" title="View" url="resources/images/view.gif" value="resources/images/view.gif"/>
</h:commandLink>
<h:commandLink binding="#{Domains.linkAction4}" id="linkAction4">
<h:graphicImage binding="#{Domains.image4}" id="image4" title="Delete" value="resources/images/delete.gif"/>
</h:commandLink>
John
JSC QA

InvalidResponseCodeException: Invalid Response Code: (401)

Hello all,
I imported adaptive web service model in webdynpro java, and tried to execute the model. I am getting following exception:
Exception on execution of web service on destination 'SP_DEST' for operation 'Query' in interface 'QueryServiceSoap': Invalid Response Code: (401) Unauthorized. The requested URL was:"http://x.x.x.x:xxxx/_vti_bin/spsearch.asmx"; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://x.x.x.x:xxxx/_vti_bin/spsearch.asmx"
In visual admin I have put basic authentication with username and password for destinations.
Any solutions please...?
Thanks in advance,
Sandesh

Hi
Probably you need to configure second destination(As you suggested above)
check this hlep might help you.[Creating Web Service Physical Destinations|http://help.sap.com/saphelp_nwce711/helpdata/en/47/fb728265553c88e10000000a42189c/content.htm]
[ Configuring Web Services and Web Service Clients in the SAP NetWeaver Administrator |http://help.sap.com/saphelp_nwce10/helpdata/en/44/4d2bb1c6b00597e10000000a155369/content.htm]
Thanks

Invalid operation for read only resultset:

Hi.
I'm developing an app that connects to Oracle, but I ran into the following problem:
When I create a Statement, I specify
that I need an Updatable ResultSet with the following code:
Statement stmt = conn.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE,
ResultSet.CONCUR_UPDATABLE);
ResultSet rset =stmt.executeQuery(somesql);
When I try to update the ResultSet, I get an SQLException: java.sql.SQLException: Invalid operation for read only resultset: updateString
Am I
doing something wrong or is this a bug?
Any info is greatly appreciated.
null

There are limitations on the kinds of queries you can perform. If the query is not suitable for update, it reverts back to readonly automatically. Read the below article about limitations and examples.
http://technet.oracle.com/doc/oracle8i_816/java.816/a81354/resltse2.htm
null

Invalid Operation on F

Hi,
I got the ff exception when I tried to call data.beforeFirst().
EXCEPTION DESCRIPTION: java.sql.SQLException: Invalid operation for forward only resultset : last
INTERNAL EXCEPTION: java.sql.SQLException: Invalid operation for forward only resultset : last
ERROR CODE: 17075
Can somebody help me on how to resolve this issue.
I'm using JDBC driver version: 9.2.0.3.0.

I'm using the scrollable cursor. Below is the code snippet.
          ReadAllQuery raq = new ReadAllQuery(A.class, exp);
          raq.addOrdering(addr.get("Afield").descending());
          raq.addOrdering(addr.get("AfieldNo").ascending());
               raq.useScrollableCursor();
               orgVec = (ScrollableCursor)session.executeQuery(raq);
I appreciate if you can help.
Thanks!

Invalid Operation on Forward Result Set.

Hi,
I got the ff exception when I tried to call data.beforeFirst().
EXCEPTION DESCRIPTION: java.sql.SQLException: Invalid operation for forward only resultset : last
INTERNAL EXCEPTION: java.sql.SQLException: Invalid operation for forward only resultset : last
ERROR CODE: 17075
Can somebody help me on how to resolve this issue.
I'm using JDBC driver version: 9.2.0.3.0.

In other words, are there issues when using calling stored procedures and loop through the results when using Oracle's JDBC driver?

Authenticating web services -- get Invalid Response Code:(401) Unauthorized

Hi,
ich have implemented a websirve in dynpro java (thanks for all the guys who wrote guides for that), but i still have a problem. i have to set username and password for authorization.
i have already tested follwoing code:
reqMo.wdSetInvocationModifier(
           new IWDWSInvocationModifier() {
             public void doModifyInvocation(Object port) {
                // Creating the SOAP Header node.
                HTTPControlInterface http = HTTPControlFactory.getInterface(port);
                http.setHTTPProxyUserPass("xxxxx","xxxxxx");
             public void doModifyAfterInvocation() {}
but i get same message as follows:
Exception on execution of web service with WSDL
URL 'http://server:port/special/wsdl_report_gen.wsdl' with operation '_-xxxx_-generateReport' in
interface '{urn:sap-com:document:sap:soap:functions:mc-style}XXXX_REPORT_GEN':
Invalid Response Code: (401) Unauthorized. The requested URL
was:"http://server:port/sap/bc/srt/rfc/sap/XXXX_report_gen/111/XXXX_report_gen/XXXX_report_gen";
nested exception is:
com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid
Response Code: (401) Unauthorized. The requested URL
was:"http://server:port/sap/bc/srt/rfc/sap/XXXX_report_gen/111/XXXX_report_gen/XXXX_report_gen"
any ideas?
Edited by: Dennis Ahaus on Dec 10, 2008 11:40 AM

Hi Dennis Ahaus,
If you are using Adaptive webservice model, you can provide the credentials as below.
wdContext.currentXXXXElement().modelObject().setInvokerProperty(javax.xml.rpc.Stub.USERNAME_PROPERTY,"username");
//           wdContext.currentXXXXElement().modelObject().setInvokerProperty(javax.xml.rpc.Stub.PASSWORD_PROPERTY,"password");
Regards,
VJR.

InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized

Hi,
We are creating a new role in ERM.We are at Approval stage.
When we have clicked on APPROVAL option, it is giving error like,
Unknown error occurred while performing operation (Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL was:"http://<hostname>:<port>/VirsaCCWFExitService5_2Service/Config1?wsdl&style=document")
Please check and advice in this.
Thanks & Regards,
KKRao.

Hi Mohit,
Thanks for your solution. My issue got resolved with the noted mentioned by you.
We have used the below mentioned link at Web Service Info. for AE Workflow in ERM.
http://<server name>:<port number>/VirsaCCWFExitService5_2Service/Config1?wsdl&style=document
But it should be the below mentioned link as per the note.
http://<server name>:<port number>/AEWFRequestSubmissionService_5_2/Config1?wsdl&style=document
Regards,
KKRao.

Lib/libz.so: could not read symbols: Invalid operation

Hi,
I am facing the following issue while compiling my code which is using gdcm lib in QT. The same source works fine in ubuntu but not here....
lQt5PrintSupport -lQt5OpenGL -lQt5Widgets -lQt5Gui -lQt5Core -lGL -lpthread
/usr/bin/ld: /usr/local/lib/libgdcmDSED.a(gdcmReader.cxx.o): undefined reference to symbol 'inflateInit2_'
/usr/bin/ld: note: 'inflateInit2_' is defined in DSO /usr/lib/libz.so.1 so try adding it to the linker command line
/usr/lib/libz.so.1: could not read symbols: Invalid operation
Makefile:181: recipe for target 'imageviewer' failed
collect2: error: ld returned 1 exit status
make: *** [imageviewer] Error 1
19:41:26: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project imageviewer (kit: Desktop)
if I add -lz in the project .pro file.. I get the following error..
usr/bin/ld: /usr/local/lib/libgdcmDSED.a(gdcmReader.cxx.o): undefined reference to symbol 'inflateInit2_'
Makefile:181: recipe for target 'imageviewer' failed
/usr/bin/ld: note: 'inflateInit2_' is defined in DSO /usr/lib/gcc/x86_64-unknown-linux-gnu/4.8.2/../../../../lib/libz.so so try adding it to the linker command line
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.8.2/../../../../lib/libz.so: could not read symbols: Invalid operation
collect2: error: ld returned 1 exit status
make: *** [imageviewer] Error 1
19:02:58: The process "/usr/bin/make" exited with code 2.
Error while building/deploying project imageviewer (kit: Desktop)
When executing step 'Make'
Don't know whats wrong and how it will be solved?
Bilal

Hi Connor,
I solved the issue, it seems like the library path was pointing to /usr/local/lib rather than /usr/lib. Now the code is working fine.
I assume that ubuntu and arch places gdcm libraries at different locations, it was working code moved from ubuntu to arch and i got that error.
Bilal

17076 : Invalid operation for read only resultset

Hi,
I am trying to update database table through java jdbc application.
But while running the program i am getting the error message " Invalid operation for read only resultset: updateString " with error code 17076.
My program is given below :
import java.sql.Connection;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.sql.Statement;
public class Misc2 {
public static void main(String[] args) {
Connection con = null;
Statement stmt = null;
ResultSet rs = null;
try {
con = JDBCUtil.getOracleConnection();
stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
String query = "select * from employees";
rs = stmt.executeQuery(query);
while (rs.next()) {
String fname = rs.getString(3);
if (fname.equalsIgnoreCase("Elmer")) {
rs.updateString(3, "Mark");
rs.updateString(2, "Robert");
break;
} catch (SQLException ex) {
System.out.println("error code : " + ex.getErrorCode());
System.out.println("error message : " + ex.getMessage());
} finally {
JDBCUtil.cleanUp(con, stmt);
****JDBCUtil Class****
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.ResultSet;
import java.sql.Statement;
public class JDBCUtil {
public static Connection getOracleConnection(){
Connection con = null;
try{
// Load the driver
Class.forName("oracle.jdbc.driver.OracleDriver");
//Establish Connection
con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:XE","ex","ex");
}catch(Exception ex){
ex.printStackTrace();
return con;
public static void cleanUp (Connection con , Statement stmt){
// Release the resource
try{
if(con != null){
con.close();
if(stmt != null){
stmt.close();
}catch(Exception ex){
ex.printStackTrace();
Please help me to fix this issue.

>
But while running the program i am getting the error message " Invalid operation for read only resultset: updateString " with error code 17076.
>
Your result using 'SELECT *' is not updateable. Gimbal2 was pointing you in the right direction. You have to specify the columns in the select list to get an updateable result set.
You also need to use 'updateRow()' to update the database and have a commit somewhere to keep the results.
This code works for me. Note that I added an explicit SELECT list, the 'updateRow()' method and an explicit COMMIT.
    try {
        con = getOracleConnection();
        stmt = con.createStatement(ResultSet.TYPE_SCROLL_SENSITIVE, ResultSet.CONCUR_UPDATABLE);
//        String query = "select * from employees";
        String query = "select first_name from employees"; -- added explicit SELECT list
        rs = stmt.executeQuery(query);
        while (rs.next()) {
            String fname = rs.getString(1);
            if (fname.equalsIgnoreCase("Adam")) {
                rs.updateString(1, "Mark");
                rs.updateRow();                                    -- need this statement to actually update the database
//                rs.updateString(2, "Robert");
                break;
        con.commit(); -- added explicit commit for testing
    } catch (SQLException ex) {See Performing an UPDATE Operation in a Result Set in the 'Updating Result Sets' section of the JDBC Developer's Guide and Reference
http://docs.oracle.com/cd/B28359_01/java.111/b31224/resltset.htm#i1024720
As gimbal2 also alluded it is considered poor practice to use column numbers to perform result set operations when you don't know for certain what column a given number refers to. Before people start jumping all over that statement let me clarify it. The key part is KNOWING what column you are referencing. It is more performant to access result column columns by column number rather than by column name since the methods that take a column name call the integer method under the covers anyway but have to search the array of column names in order to get the column number.
With your query (SELECT *) there is no way to be sure the column order is the same since the table could be redefined with the columns in a different order or certain columns having been deleted. So for performance LOOP processing column numbers are used inside the loop but those column numbers are determined by using the metadata BEFORE the loop to convert column names to column numbers.
That way you code (BEFORE the loop) can use column names but you use a set of integer variables (one for each column) for the actual access inside the loop.

Landed Cost - Invalid Account Code

Hi ,
I have checked properly that each and every account is mapped correctly .
But when i perform that operation there comes an error : 'Invalid Account Code '
Is there any more declaration needed . Please suggest me what to do ?
Thanks
Ashish

Hi Ashish.....
Whichever accounts you mapped into the Freight screen you just check tose accounts whether they are proper or not. Just check those accounts are present in your Charts of accounts or not because sometimes we delete the account but there code remains as it is in settings screen because of which we get unwanted errors......
Try to put the currency of all the accounts All Currencies.
Regards,
Rahul

Invalid product code when bought from apple

Hello, I am trying to help my sister install a copy of CS6 which she bought from Apple a month ago with her new mac. She is trying to follow the instructions to verify herself as a student and the identification website is saying that the product code is invalid or not recognised.
I have filled out the contact us form and not had a reply, and have also tried to speak to one of the robots at Adobe and it just kept saying adobe cannot help with an invalid product code and to speak to the reseller, is this a piracy issue and the product code has already been registered? And if this is a piracy issue who is to say that Apple will be able to give us one which isn't already pirated?
Can anyone help?

As much as you may not like it: Talk to support. If you feel you're not getting the answers you want, escalate the case to the next operator level. You can also try to create a support case and post the case number over at the Download, Install & Setup forum which is monitored by Adobe staff. And finally, also try the web chat.
Mylenium

Upgrade of 1131AG to LWAPP fails. "Invalid country code ()"

Hi all,
I have problems upgrading my 1131 Autonomous to LWAPP to be used towards an WLC 4402.
I have used the Upgrade tool and tried with 2 different versions of the Cisco recovery image on 2 different 1131 hardware boxes.
The upgrade seeems to go ok all the way. It downloads the image, reboot, connects to our WLC and starts the download of latest image from the WLC.
But at next restart it won't connect.
Version of WLC is 4.2.130. WLC is accepting self signed certs from AP's.
The WLC has 8 functioning AP's connected. These AP's where LWAPP from start though.
The WLC gives me the following errors when running debug:
Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 Received LWAPP JOIN REQUEST from AP 00:25:84:90:f7:f0 to 06:0a:10:10:00:00 on port '1'
Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 AP AP0024.976f.8620: txNonce 00:1B:D5:68:D0:20 rxNonce 00:25:84:90:F7:F0
Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 LWAPP Join Request MTU path from AP 00:25:84:90:f7:f0 is 1500, remote debug mode is 0
Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 Successfully added NPU Entry for AP 00:25:84:90:f7:f0 (index 9)
Switch IP: xxx.xxx.1.101, Switch
Port: 12223, intIfNum 1, vlanId 0
AP IP: xxx.xxx.144.55, AP Port: 63586, next hop MAC: 00:00:0c:07:ac:01
Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 Successful transmission of LWAPP Join Reply to AP 00:25:84:90:f7:f0
Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 spam_lrad.c:1766 - Operation State 0 ===> 4
Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 Register LWAPP event for AP 00:25:84:90:f7:f0 slot 0
Thu Aug 20 12:28:56 2009: WARP IEs: (12)
Thu Aug 20 12:28:56 2009: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
Thu Aug 20 12:28:56 2009: 00:25:84:90:f7:f0 Register LWAPP event for AP 00:25:84:90:f7:f0 slot 1
Thu Aug 20 12:28:56 2009: WARP IEs: (12)
Thu Aug 20 12:28:56 2009: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 Received LWAPP CONFIGURE REQUEST from AP 00:25:84:90:f7:f0 to 00:1b:d5:68:d0:23
Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 AP 00:25:84:90:f7:f0: Invalid country code ().
Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 AP 00:25:84:90:f7:f0: Invalid country code ().
Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 Updating IP info for AP 00:25:84:90:f7:f0 -- static 0, xxx.xxx.144.55/255.255.255.0, gtw
xxx.xxx.144.1
Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 Updating IP xxx.xxx.144.55 ===> xxx.xxx.144.55 for AP 00:25:84:90:f7:f0
Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 AP 00:25:84:90:f7:f0: Invalid country code ().
Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 AP 00:25:84:90:f7:f0 not allowed to join. Regulatory Domain check failed.
Allowed regulatory domain:
802.11bg:-E 802.11a:-E
Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:25:84:90:f7:f0 slot 0
Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 00:25:84:90:f7:f0 slot 1
Thu Aug 20 12:28:57 2009: 00:25:84:90:f7:f0 Deregister LWAPP event for AP 00:25:84:90:f7:f0 slot 0
Seems like the AP is not sending a Country code at all "Invalid country code ()."
The WLC and AP's are in different countries (Sweden and Belgium), but that has been prepared for in the WLC which accept both.
Any ideas?

Solved.
I had the errormessage from the beginning... But found it to unlikely...
"Regulatory domain check failed"
The supplier for our Belgian site has delivered a model of AIR-AP1131AG-N-K9, which is a US version.
What I need is AIR-AP1131AG-E-K9 for our European sites.
For you who have run into the same problem, follow this link for more info:
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps6087/product_data_sheet0900aecd801b901c.pdf
Thanks for the assistance.

Invalid Operation Code: "19"

Similar Messages

Maybe you are looking for