Invalid origin Host error AVP due to DRA originating RAR

Here is the scenario in our Customer environment :
For VoLTE Gx environment, our Customer use Cisco PGW, Oracle DRA and Openet PCRF.
Their DRA has sessions/subscribers database.
In order to avoid ghost sessions on DRA, they have implemented a feature to send RAR message to PGW from DRA to have a confirmation that the user is still using the services and the session is still alive.
As per PCEF (ims-auth service) current design is :
in a DRA setup, RAR from any origin-host is accepted
in non-DRA setup RAR is accepted only from configured peer
The PCEF (ims-auth service) consider the setup as DRA or non-DRA based on the origin-host received in CCA-I or RAR.
DRA setup = If the Origin-Host received in CCA-I/RAR is not the same as the directly connected/configured peer (in diameter-endpoint). The DRA mode is selected by PCEF and we accept RAR from any origin-host.
Non DRA setup = If the Origin-Host received in CCA-I/RAR is the same as the directly connected/configured peer. The non DRA mode is selected by PCEF and we accept RAR only from primary or the secondary server of the selected row in the diameter host-select table.
The Problem is :
• When the origin-host is changed using RAR, and it is now the
same as the directly connected/configured peer ,the directly connected peer is not considered as a DRA from PCEF perspective.Then when the RAR received from a different peer than the one configured, is rejected.
• It also the same case for CCR-T which is sent to the new origin-host received in the RAR .
Please could you advise some best practice so that PGW (PCEF) accept RAR sent from any origin host ?
Kindly,

Similar Messages

I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

I am getting the 'invalid personalization information' error when I start my photoshop cs8. I cannot find my original disk to re-install, but do have the serial number. Can I download a trial version and then enter my serial number?

If it is the first CS version then you will need to check out the following. I believe it applies to CS as well even though it specifies CS2....
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

How can I fix an invalid sibling link error message without my original install disk?

How can I fix an invalid sibling link error message without my original install disk?

Hi Jeff,
It's not even likely the Install Disc could fix that, but if you want to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
You must repair the HD, your best bet is likely DiskWarrior.
BTW, you might enjoy these DiskWarrior review/recommendations...
http://discussions.apple.com/thread.jspa?messageID=9645801&#9645801
http://discussions.apple.com/thread.jspa?messageID=10541019#10541019
http://discussions.apple.com/thread.jspa?messageID=11918925&#11918925
http://discussions.apple.com/thread.jspa?messageID=12684129#12684129
http://discussions.apple.com/thread.jspa?messageID=12744794&#12744794
http://discussions.apple.com/thread.jspa?messageID=12912879#12912879
Finally, you should run DiskWarrior if your Mac explicitly warns you of a problem with your disk in the form of an error message. Most of these errors are reported by the built-in Disk Utility whether your Mac OS X version is 10.3 Panther, 10.4 Tiger, 10.5 Leopard, 10.6 Snow Leopard or 10.7 Lion. Here are some of the most common messages:
Disk Repair: The disk was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible.
The underlying task reported failure on exit.
Invalid node structure.
Keys out of order.
Invalid key length.
Invalid directory item count.
Invalid extent entry.
Invalid record count.
Invalid index key.
Invalid sibling link.
http://www.alsoft.com/DiskWarrior/details3.html

Invalid Key code Error while installing crystal report server 11

While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me know

Ajit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony

"Invalid User ID" error while running OSoft Application in browser

Hi,
I have installed BPC 7.5 SP04 in Multi Server environment where SQL Server, OLAP Server, Reporting Server on one machine and Application Server and Web Server on other machine, After installing I tried to run Osoft application via url "http://Application Server name/OSoft" as suggested in Install guide but receiving "Invalid User ID" error
Error Information
Server Error in '/OSoft' Application.
Invalid UserID
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Invalid UserID
Please guide me on this as what can be the cause of this error and how to fix it.
I have used Windows Server 2008 with IIS 7.
Thanks,
Rohit
Edited by: Khatak Rohit on Mar 18, 2011 10:57 AM

First login must be done with Installation user.
In your case you tried to login from your PC where you were conected with your user.
This user is used to connect to BPC and this user has no rights into BPC.
It was used this user because BPC allow Windows authentication.
So you have to go into IE - Tools - Internet Options
Select Security Tab - Select Intranet
Push Custom Level
Go to section - User Authentication - select "Prompt always user and pwd"
Close IE
Open again and try http://nameofserver/osoft you will receive now a prompt for user and pwd.
Input an user and pwd with access to BPC and you will see this time the page will be load correct.
Regards
Sorin Radulescu

Invalid File Name Errors when syncing to Ipod

Ever since an update last fall I have been getting Invalid file name errors when I try to sync my ipod. A window would pop up saying "Windows could not copy 'SONGNAME' to the iPod 'IPODNAME' because an unkown error occurred (-37)." I would press OK and another window would immediately pop up that would say, "Attempting to copy to the disk 'IPODNAME' failed. the file name is invalid or too long."
The windows would keep popping up countless times until the sync would just seem to time out and stop.
The problem songs would have no problem playing in iTunes.
Prior to the update this did not happen. No new songs were added around this time and nothing was changed to my file directory structure. I was too busy to troubleshoot this problem at the time and hoped that another update would fix it. Well, here I am many months and updates later and still no fix. After fiddling with iTunes and resetting my Ipod multiple times (goodbye saved angry bird games)I have found out that:
1. By writing down the file name when the error windows pop up I can get a partial list of the problem file names. I could not get a complete list of the problem files because the sync would time out before a full list could be compiled (the list appears to be in the hundreds).
2. If I changed the name of the file by adding OR deleting one character, remapping the song in itunes, the song would then sync properly.
3. If I changed the name of the file, remapped the location of the file within iTunes, changed the name of the file BACK to the original name that iTunes supposedly had a problem with, and then remapped the location of the song within iTunes, the song would then sync properly
4. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, the song would sync properly.
5. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, moved the file BACK to the original directory, remapped the song again, the song would sync properly.
6. If I renamed the file and then named it back to the original file name WITHOUT remapping the file location in iTunes, the song would still not sync properly
7. If I moved the file into a different directory and then back again without remapping the file location, the song would still not sync properly.
8. Changing or deleting the tags has no effect at all.
9. File name lengths are already under 200 characters and there are no special characters used.
So, to sum up, I have found out a way to fix the issue. The problem is, that there are hundreds of songs that appear to be affected and renaming or moving every single one individually and then remapping is extremely inefficient and ignores the cause of the problem. I also did not want to delete the itunes library and then add all of the songs back in because I have many custom playlists that I have spent hours creating and I do not want to delete them.
Is there a better way to fix the problem? Especially if someone knows the root cause?

I got a procmon log file and examined it. I have the file and I could also provide you with that or screenshots of it.
There is nothing unusual about it. I can see entires in which CR has successfully opened the report and has cached in a c:\windows\temp.
However there is one or two non-successful entries that may be related, especially that examining the stack trace brings us to a call to get_ProductLocaleID():
- A call to read reg entry HKU\S-1-5-20\Software\Business Objects\Suite 12.0\Crystal Reports\Locale fails with NAME NOT FOUND.
- immediately after that and from the same process (w3wp.ex) there is a call to open directory "c:\" which is logged as ACCESS DENIED.
Any subsequent unsuccessful calls seem to be results of exception handling in the debug code.
Does this point to any setup issues with CR? We always run the redistributable x86 runtime when installing it.

Invalid Cursor Position Error on Windows XP using CachedRowSet

Hello, I don't know if this question lies here, but I thought it would be the well suited place so please pardon me if it isn't. I am trying to access multiple pages from my database on my XP machine but I am getting an "invalid cursor position" error when trying to access the next page. I don't know how this error is coming about because it works well on a Vista machine with no errors. I don't know if it is my drivers or something that brings about the problem. I am using mysql connecter 5.1.10, JRE 1.6.0_02 and windows XP SP2
Below is a simple code that brings the error.
package Admin; import javax.sql.rowset.CachedRowSet; import com.sun.rowset.CachedRowSetImpl; public class test { public void table() { try { CachedRowSet crs=new CachedRowSetImpl(); crs.setUrl("jdbc:mysql://host:3306/database"); crs.setUsername("User"); crs.setPassword("password"); crs.setCommand("select * from myTable"); int[] keys = {1}; crs.setKeyColumns(keys); crs.execute(); crs.last(); if(crs.getRow()>500){ //new overLimit(); } crs.setPageSize(3); crs.execute(); while (crs.next()) { System.out.print("page one----"); System.out.println(crs.getString(1)); } while(crs.nextPage()){ System.out.println("page two---"); while (crs.next()) { System.out.println("in page two"); System.out.println(crs.getString(1)); } } } catch (Exception e) { e.printStackTrace(); } } public static void main(String []args){ new test().table(); } }

Yes I am running the same code on both machines. The output I get on the XP machine is shown below. I modified the code I posted earlier and replaced the "page two" text with "page (then page number)" and also omitted the "in page two" text for better readability---------PAGE 0---------
DB09140110
DU35463010
EX29201810
---------PAGE 1---------
EX38341510
EX40471810
KZ280299
----------PAGE 2---------
LA130299
LC130299
MC081009
----------PAGE 3---------
RZ300502
VA130299
VI020209
----------PAGE 4---------
YX101008
ZE220299
ZF231105and vista....
----------PAGE 0---------
EX38341510
EX40471810
KZ280299
----------PAGE 1---------
LA130299
LC130299
MC081009
----------PAGE 2---------
RZ300502
VA130299
VI020209
----------PAGE 3---------
YX101008
ZE220299
ZF231105

"Invalid DOS version" error message when installing Tomcat in Windows98

I tried to install Tomcat 5.0 in Windows 98. At first, it produced "Out of Environment Space" error message. I then changed the "Initial Environment" from Auto to other values (bigger than 2816) for both startup.bat and shutdown.bat.
When I restarted the Tomcat, it produce "Invalid DOS version" error message. I thought about updating the DOS but previously when I had WinXP installed in computer, I couldn't access to the server due to the dos version issue.
Is there any way to handle this? I would really appreciate the help:) Thank you very much..

no, use the serial number listed on the page where you downloaded acrobat 7, not your acrobat serial number

Invalid TLV record error

Post Author: CHTClay
CA Forum: Deployment
We have an app that was originally written in VB6 (using the ActiveX viewer) with reports designed in Crystal 8.5. A new executable was added to the app written in C# that uses (not embedded) two report files designed in Crystal 11.5. The VB6 code was modified to include references to the 11.0 RDC. The install program (before adding the reports to the C# module) used the following merge modules:
Crystal11_NET_EmbeddedReporting.msm, CrystalReports11_RDC_Designtime.msm, CrystalReports11_RDC_Runtime.msm, CrystaReports85_ActiveXControl.msm, CrystalReports85_Crpaig80.msm, CrystalReports85_Cpre32.msm and CrystalReports85_Imploder.msm.
This installation and the app ran perfectly. After adding the reports to the C# module we recompiled the install (using the same merge modules as above) and reinstalled the app. The VB6 reports ran as expected, but the two new reports failed because some Crystal Desicions components did not get installed.
After researching, I created a new install package with the following merge modules:
CrystalReports11_5_RDC_Designtime.msm, CrystalReports11_5_RDC_Runtime.msm, CrystalReports11_5_RDC_Reportengine.msm, CrystalReports11_5_RDC_License.msm, CrystaReports85_ActiveXControl.msm, CrystalReports85_Crpaig80.msm, CrystalReports85_Cpre32.msm and CrystalReports85_Imploder.msm.
Reinstalled the app. The two reports in the C# module work great, however, all of the reports associated with the VB6 code get an "Invalid TLV record" error.
I have researched this issue here and on the web with no joy!
Is Crystal Decisions and ActiveXviewer mutually incompatible? Are we missing something in the installation build?
Any advice would be greatly appreciated.

This has happened in the past when your code uses a generic prog id to create the object:application.CreateObject("CrystalRuntime.application")change toapplication.CreateObject("CrystalRuntime.application.115);Another thing you might want to try is to put the craxdrt115.dll into a COM+ package and give it administrative rights. KBase Article ID:c2017301This is a very generic error so it is hard to say what the problem is with so few details but I tried my best. Rob Horne <a href="/blog/10">Rob's blog - http://diamond.businessobjects.com/blog/10</a>

Invalid LOV query error

I am trying to modify a query for LOV page item but get an Invalid LOV query error when trying to Apply Changes to my page(query however works in SQL*Plus)
I am trying to change the date format of query result to MON YYYY.
Original query that works:
select distinct bill.BILLED_DATE display_value, bill.BILL_ID return_value
from BILL;
New Query that fails in APEX (but works in SQL*Plus)
select distinct to_char(bill.BILLED_DATE, 'MON YYYY') display_value,
bill.BILL_ID return_value from BILL;
Anyone have any idea what I need to do to make this work?
"1 error has occurred
LOV query is invalid, a display and a return value are needed, the column names need to be different. If your query contains an in-line query, the first FROM clause in the SQL statement must not belong to the in-line query"

Strange, this lov does work and is no different than yours:
select distinct to_char(sysdate,'MON YYYY') disp, 1 retval from dual
What are the results from the query? Can there be something wrong with that?
Regards Guido

Acrobat Pro V8.1.2 "Invalid Page Range" Error - Rotate Pages

Hi,
I have Adobe Acrobat Professional version 8.1.2. For the last couple of weeks every time I try to rotate a page in any direction I get the following error:
"Invalid Page Range" (OK)
I have tried every combination of options for amount of rotation and page range (all, selected, specify). No matter what I do I get the same message. I have tried this on several different documents both encrypted and unencrypted.
Does anyone have any ideas?

I know this is nearly 4 years late, and I realise this may not have been the cause with the original post, but for the sake of covering this issue for anyone who searches and lands on this page: The most common cause for receiving this "invalid page range" error when attempting to rotate pages is becaue the option for "Even and Odd Pages," "Even Pages Only," or "Odd Pages Only" drop-down choices are inconsistent with the selection. For example, if you're trying to rotate just page 1, but the selection "Even Pages Only" is slected, then you will receive this error. You will find this option in the options window that appears when you click the Rotate command.
Just my two cents after trying to remedy this over and over with users.
Cheers!

JDBC/SQLJ Team - Please respond - invalid column type error

Hi, I have posted several messages regarding problems using SQL/J to call out a stored packaged function that returns a ref cursor, but haven't gotten one response. I have yet a new problem with it. JDBC team, please acknowledge!
I change the way I obtain a connection to the database from using the Oracle.connect along with a properties file, to now using a DataSource connection pool. As a result, I am constantly getting a SQLException: Invalid column type error. If I change the call to the stored function to a query in the SQLJ code, it's fine. What's going on??
A previous message I wrote stated I was constantly getting a "closed statement" error when I tried to call the next method of the iterator. I corrected this by removing the finally clause in the generated JDBC code that released the execution context.
Again, the environment is JDK1.2.2, SQLJ 8.1.6 SDK, JDBC 8.1.6 thin, all on NT.
Thanks
David

I am getting the same error message - Invalid Column Type. I am creating a Default Context by calling Oracle.getConnection(connection) passing in an instance of my own connection class that basically delegates to the OracleConnection. We wrapped the Connection so that we could trap and recover from lost database connections.
My environment is Solaris 2.6, Oracle 7.3.4 with Sqlj 8.0.5.
Thanks!
[email protected]
<BLOCKQUOTE>quote:<HR>Originally posted by David Christopher ([email protected]):
Hi, I have posted several messages regarding problems using SQL/J to call out a stored packaged function that returns a ref cursor, but haven't gotten one response. I have yet a new problem with it. JDBC team, please acknowledge!
I change the way I obtain a connection to the database from using the Oracle.connect along with a properties file, to now using a DataSource connection pool. As a result, I am constantly getting a SQLException: Invalid column type error. If I change the call to the stored function to a query in the SQLJ code, it's fine. What's going on??
A previous message I wrote stated I was constantly getting a "closed statement" error when I tried to call the next method of the iterator. I corrected this by removing the finally clause in the generated JDBC code that released the execution context.
Again, the environment is JDK1.2.2, SQLJ 8.1.6 SDK, JDBC 8.1.6 thin, all on NT.
Thanks
David<HR></BLOCKQUOTE>
null

Resolving host error on OSX Yosemite 10.10.1

Hi,
I have been facing resolving host error in chrome every 5 minutes for last few weeks. I have tried changing the DNS to 8.8.4.4 etc with no promising results. The issue is faced by mac only as all the other devices seem to connect to the internet just fine. The parental controls are off so even that is not an issue. Any help is appreciated.
Specs:
MacBook Air (13-inch, Mid 2013)
Processor: 1.3 GHz Intel Core i5
Memory: 4 GB 1600 MHz DDR3

Bah!!! I have only just experienced this issue (along with a billion other issues in Pages, but I'll leave that for another day!).
Thank you to all the great suggestions here, which didn't quite work, but led me to something that did.
I tried this and it didn't quite work:
"Hi! There seems to be a workaround for this (I've had this problem too, you'd think Apple'd sort it out?!?!)
At the top of your Pages document is the name of your document. Hover your mouse over this briefly and a drop down arrow will appear. From here you can name the document, give it a Tag and choose the save destination. Click this drop down arrow, and select your save destination from another drop down that will apear. After you have clicked on your selected save destination, click away from the drop down. Then, simply save (Cmd+S OR navigate to file>save) and it will have saved for you!"
But this worked for me:
I clicked on the drop down arrow, like suggested above, and changed the document name. Then I clicked on the 'Where' drop down menu and went right down the list and clicked on the 'other...' choice right at the bottom of the list. I chose a different location and then clicked 'Move'
For some unknown reason this worked for me where the other suggestion didn't quite work.
I've had to find so many work arounds like this in Pages recently, which you shouldn't have to do!
The only reason why I am persisting with pages is it save my clickable links when exported to PDF, where the Word program doesn't.
I hope these issues get sorted before I thrown the computer out the window due to pure frustration!

BI Composer - Error of Invalid BIPS Connection error

Hello Experts -
When we select the subject area to create analysis in BI composer then we get "Invalid BIPS Connection" error.
This mught not be related to BI COmposer.
Could you help us here in debugging this issue.
Thank you!

Hi
I too facing same error in obiee11.1.1.6.2Bp1 version
Earlier Its working fine inOBIEE11.1.6.0 version and just now upgraded into obiee1111621 then the bi composer throwing bi composer invalid connection
I just Confirming below I did
1.Instanconfig file bi composer tag enable as true
2. Extending oracle.bicomposer.template.11.1.1 etc by using weblogic configuration wizard and odbc configured
3. Fmw em update ( host,port,user,password etc on System MBean configuration
4.) also tried to install that bicomposer script file via command prompt still it's not working
Note:bi comppser obiee11.1.1.6.0 version was working fine for me
My current setup having ssl and I am on windows ..already checked oracle not and some blog but no luck ..
Edited by: Devarasu on Aug 31, 2012 1:30 AM

Portege 660CDT "Invalid System Disk Error"!!!

I just purchased a Used 660CDT and placed a new hard drive in it. Now I can not load an OS Due to This Error "Invalid System Disk". I have tried to Boot from my XP Cd but just the same. I have attempted to boot from a Norton Disk and nothing as well.. I have no clue what is wrong..
I have made sure that the Bios is set to start with the Drive first and not the HDD.
I would like to use this system someday, but right now I dont see it happening.
If anyone can help I would thank you greatly.
Thank you
Robert
Houston, Texas

Hi Robert
As far as I know this oldie can handle just with 1,3 GB HDD. How much capacity has a new HDD?
Unfortunately it is not easy to say what the problem is because who knows what you do exactly and which OS you want to use. Just for info. This old Portege is delivered with W95 and you should try to use the same OS.
"Invalid System Disk error means that the Windows Setup was unable to copy the system files to the hard disk.
By the way, check Toshiba download page under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU and under archive you will find lot useful stuff for this old notebook.
Good luck!

Invalid origin Host error AVP due to DRA originating RAR

Similar Messages

Maybe you are looking for