Invalid package file on Asus fonepad with android 4.1.2

Seems to be a compatibility problem installing Adobe AIR on to an Asus phonepad returning "error package file is invalid". Is there a fix in the air? Several other fonepad users have reported the same problem on Google play. wotdyano.

Excuse me, but doesn't Nexus 7 also run Andriod 4.2 using an Intell processor? It downloads there just fine. Along with Samsung Galaxy 2. But those with S.G. 3 or similar seem to have trouble. My Asus MeMo is listed as supported but I am alsl having trouble downloading and installing.

Similar Messages

  • Cannot install Photoshop Touch, get invalid package file

    I have purchased the Photoshop Touch for phone on my Galaxy Note2 and haven't been able to install it since. It goes thru the install process, but at the end I get: ERROR PACKAGE FILE INVALID. I've gone thru this several times and it's very frustrating. Additionally, I have tried to search the forums and Google solutions, nothing is working. I've even chatted with and spoken with a couple of Adobe representatives...no success. I just keep getting referred bk to this site.  Can anyone help me either get it downloaded or tell me how I can get a refund. #paidforanappIhaveyettobeabletouse

    Please try the steps explained here:
    http://www.android-advice.com/2012/fix-android-market-package-file-is-invalid/?utm_source= feedburner&utm_medium=feed&utm_campaign=Feed%3AAndroidAdviceTutorials%28AndroidAdvice%26+Tutorials%29
    HTH

  • Why doesn't FF available for my Asus tablet with Android 4?

    I have an Asus transformer 101 tablet with Android 4
    I wanted to install Firefox but got a message the Firefox is not compatible with my device.
    Why is it?

    I believe tablet support is not yet completed. Please see this thread about using a test/development version now if you don't want to wait for the official release:
    [https://support.mozilla.org/en-US/questions/930834 Why is firefox not supported on android tablets yet. If it is still under testing, why not allow users to test it on their tablets and give feedbacks]

  • A1430 on the iPad (3rd generation) Wi-Fi   Cellular.  Bought in India is it GSM or CDMA. Please give me link to restore to 6.1.3 i tried both gsm and cdma it says invalid .ipsw file! Help fellas!

    A1430 on the iPad (3rd generation) Wi-Fi + Cellular
    I have this model of iPad Above!
    I have bought this iPad3 in India
    Please tell me if its GSM/CDMA also give the link to restore it to iOS6.1.3
    I tried both .ipsw files, but for both the files GSM/CDMA iTunes said Invalid package file
    Need help!
    Reply ASAP
    Thank You! Regards :)

    Hi
    my connection is not good i tried to download ipsw via itunes and few time i lose connection also that file got again zero KB and wanna download that again so for this issue me and other need to download ipsw as direct with download manager or anything wich file will not lose and has resume so need to help more also know which ipsw we could download
    please help us more
    thanks

  • Mouse scroll wheel not working on Asus Transformer with Swiftpoint Mouse. Is there a fix?

    Asus Transformer with Android 3.1 Honeycomb. Mouse is the Swiftpoint mobile wireless mouse. The scroll wheel doesn't function in the latest firefox mobile browser. Other browsers like the built-in browser and Dolphin browser work.
    I've tried going into the firefox config and tried all the mousewheel fixes, but still cant get the wheel to work. Is this a known bug?

    Sorry, this is not possible in the current version of Firefox, but we have an open bug report where we are tracking this issue here:
    https://bugzilla.mozilla.org/show_bug.cgi?id=686228
    With luck it will be fixed in a future version.

  • Can't package native installer on Linux with Flex SDK 4.5 : Invalid AIR file

    Hi,
    We've moved our application to compile against the 4.5 SDK.
    We're compiling it with Flash Builder (on mac) into an air file and as our application is using NativeProcess API, we're packaging it on each platform into a native installer with the following command (linux example) : adt -package -target native app.deb app.air
    We think we fall into the same issue as http://forums.adobe.com/message/3271944#3271944 but for the 4.5 DSK.
    On Linux it used to work with the following environment (env1):
    - Ubuntu 10.10
    - Java Sun 1.6.0_24
    - Flex SDK 4.1.0.16076 + Adobe Air SDK 2.5.0
    It stops to work when we upgrade to the new Flex SDK (env2):
    - Ubuntu 10.10
    - Java Sun 1.6.0_24
    - Flex SDK 4.5.0.20967 (with the default embeded Adobe Air SDK 2.6)
    The faut message is "Invalid AIR file" and nothing is logged in the log file (/home/<username>/.appdata/Adobe/AIR/Logs/Install.log).
    1) The .air file is installing correctly on env2 (without the support of the NativeProcess as expected)
    2) We also tried to compile the project directly on env2 :
    amxml app.mxml
    adt -package -storetype pkcs12 -keystore cert.p12 app.air app-app.xml air.swf
    The .air file is installing fine but the packaging into a native process fails in the same way...
    3) We tried to package a native installer of our .air file on env1 and it works!!! (the installed application seems to work fine also on env2!!!)
    Are we missing something or does it seems to be a bug of the Flex SDK 4.5?
    Are there some restrictions to package a native installer with the Flex SDK 4.1 a air app build with the Flex SDK 4.5 ?
    Thanks in advance,
    Mich

    Hi,
    Finally we figure out how to solve the issue.
    The packaging into native .deb installer fails as explain above because with the hole Flex SDK 4.5 (adt -version told 2.6.0.1920).
    The packaging is successfull if only Air SDK 2.6 is install.
    What is strange that both adt seems to be the same "2.6.0.1920" (found with "adt -version").
    Can someone from the Adobe dev team explain it?
    I suppose as the Flex SDK is not available for the Linux platform, the download only contains the Air SDK for Windows and Mac OS as opposed to the specific download of the Air SDK for te Linux platform...
    Thanks,
    Mich

  • Package load Failed! Invalid package Title, manifest file cannot be found

    Greetings. I am new to UPK and am seeking guidance on an upgrade to 11.1.
    A little background on what we are trying to do:
    We have two machines:
    Windows 2003 machine in domain 'X' | UPK 11.0.0.1.
    Windows 2008 R2 virtual machine in domain 'Y' | UPK 11.0 on the new machine first, install the 11.0.0.1 patch, and then upgrade to 11.1.
    We are using the same database as the old machine. Developer Server is Standard Authentication, Knowledge Center is Windows authentication.
    ==========================================================================================
    So far we have installed 11.1 with the respective database upgrades, but are lost as to how to migrate the old Content Root data. We have copied all the content to the new Content Root, added it to IIS like the old machine, and verified that the UPK database Content Root path is correct and working.
    For the rest of the post, I am remoted into the server from my local workstation, and then using IE to access KCenter on the server's FQDN, not via localhost.
    Since I am green, so I presumed that I would need to import the titles under Manager in KCenter. I zipped each content folder individually (they are named "1", "9", etc), and then attempted to import each zip file.
    NOTE: At this stage sometimes we are prompted to authenticate again. When it does, sometimes the credentials that we know work, get rejected and we are prompted again. This will repeat until we get a 401 and we have to start over. We have verified that the Windows account currently in session with the site is valid and has administrator authority within KC.
    NOTE2: On the first few tries, .NET complained that maxRequestLength was not large enough. I had our servers team increase it on the actual server in order for us to proceed.
    Provided we don't have to authenticate again, or that it actually accepts our credentials, we get to the 30% mark and then receive the error: *"Package load Failed! Invalid package Title, manifest file cannot be found"*
    Does anyone have any wisdom for this process? The title importation section in the deployment manual is not helping, and the administrator from whom I am taking over this software has not had to deal with this before.
    Thank you,
    Ian
    Edited by: 986290 on Feb 5, 2013 10:21 AM

    Hi Marc, thanks for the post,
    I have gone through an extensive troubleshooting process with Oracle, including their development team, in order to fully complete our project setup. As a supplemental bit of information, we also were having connection errors when attempting to publish directly to the knowledge center.
    As far as the context of this post, here is the solution in brief:
    1) Verify that the package being imported was published from the same version of the Developer Client as the Knowledge Center installation's.
    2) Check for database consistency issues. In our case we were using a database that was built in another domain. After numerous attempts with Oracle support on the line to determine the inconsistency, it was decided to completely reinstall and build a new database from scratch in the new domain.
    3) Check application pool identities and access (while we had some inconsistencies here, correcting them did not change the behavior of the import/publish errors)
    In review, a lot of what we had setup was correct. Our primary point of failure, we feel, was using the old database. Technically this should not have been a problem, but Murphy likes to get his way sometimes.
    Cheers,
    Ian

  • Package into a native installer fails on Linux (Flex SDK 4.5) : "Invalid AIR file"

    Hi,
    We've moved our application to compile against the 4.5 SDK.
    We're compiling it with Flash Builder (on mac) into an air file and as our application is using NativeProcess API, we're packaging it on each platform into a native installer with the following command (linux example) : adt -package -target native app.deb app.air
    We think we fall into the same issue ashttp://forums.adobe.com/message/3271944#3271944 but for the 4.5 DSK.
    On Linux it used to work with the following environment (env1):
    - Ubuntu 10.10
    - Java Sun 1.6.0_24
    - Flex SDK 4.1.0.16076 + Adobe Air SDK 2.5.0
    It stops to work when we upgrade to the new Flex SDK (env2):
    - Ubuntu 10.10
    - Java Sun 1.6.0_24
    - Flex SDK 4.5.0.20967 (with the default embeded Adobe Air SDK 2.6)
    The faut message is "Invalid AIR file" and nothing is logged in the log file (/home/<username>/.appdata/Adobe/AIR/Logs/Install.log).
    1) The .air file is installing correctly on env2 (without the support of the NativeProcess as expected)
    2) We also tried to compile the project directly on env2 :
    amxml app.mxml
    adt -package -storetype pkcs12 -keystore cert.p12 app.air app-app.xml air.swf
    The .air file is installing fine but the packaging into a native process fails in the same way...
    3) We tried to package a native installer of our .air file on env1 and it works!!! (the installed application seems to work fine also on env2!!!)
    Are we missing something or does it seems to be a bug of the Flex SDK 4.5?
    Are there some restrictions to package a native installer with the Flex SDK 4.1 a air app build with the Flex SDK 4.5 ?
    Thanks in advance,
    Mich

    Hi,
    Finally we figure out how to solve the issue.
    The packaging into native .deb installer fails as explain above because with the hole Flex SDK 4.5 (adt -version told 2.6.0.1920).
    The packaging is successfull if only Air SDK 2.6 is install.
    What is strange that both adt seems to be the same "2.6.0.1920" (found with "adt -version").
    Can someone from the Adobe dev team explain it?
    I suppose as the Flex SDK is not available for the Linux platform, the download only contains the Air SDK for Windows and Mac OS as opposed to the specific download of the Air SDK for te Linux platform...
    Thanks,
    Mich

  • REFInd with MacBook Pro, Retina: invalid loader file!

    I'm trying to dual boot Arch and OSX on a MacBook Pro, Retina, 15".  I've been following the Direct EFI booting (rEFInd) guide, but I've also read through a lot of the related docs.  Because many instructions on the web seem outdated based on recent improvements in rEFInd, I will post what I have done so far since this info may be relevant.
    1. I resized my harddrive.  I installed arch on an ext4 formatted partition (/dev/sda4 with 128M gap before, ie.., sector "+128M" in cgdisk).
    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
    sda 8:0 0 233.8G 0 disk
    ├─sda1 8:1 0 200M 0 part
    ├─sda2 8:2 0 116G 0 part
    ├─sda3 8:3 0 619.9M 0 part
    ├─sda4 8:4 0 17G 0 part
    └─sda5 8:5 0 99.9G 0 part
    2. Running OSX, I installed refind (refind-bin-0.8.0) using the --nodrivers option. 
    sudo ./install.sh --nodrivers
    Installation appeared to be successful. 
    3. I updated the refind.conf file.  The "scan_all_linux_kernels" is uncommented by default, and I uncommented the also_scan_dirs line so that these two lines appear as shown, with everything else default:
    scan_all_linux_kernels
    also_scan_dirs boot,ESP2:EFI/linux/kernels
    Result: rEFInd loads on boot, but no option for Arch appears (only the Mac option). 
    4. I decide to try a manual menuentry, so I set the scanfor line like this:
    scanfor internal,external,manual
    Then, I write in an entry for Arch Linux (and comment all other menu entries):
    menuentry "Arch Linux" {
    icon EFI/refind/icons/os_arch.icns
    volume 0FC63DAF-8483-4772-8E79-3D69D8477DE4
    ostype Linux
    loader /boot/vmlinuz-linux
    initrd /boot/initramfs-linux.img
    options "rw root=/dev/sda4 rootfstype=ext4 libata.force=noncq"
    I verified that vmlinuz-linux and initramfs-linux.img exist and are in the /boot directory in my main arch partition (/dev/sda4).
    Result: I get an Arch menu entry, but when I click on it I get this error message:
    Starting vmlinuz-linux
    Using load options 'rw root=/dev/sda4 rootfstype=ext4 libata.force=noncq initrd=\boot\initramfs-linux.img'
    Invalid loader file!
    Error: Not Found while loading vmlinux-linux
    I also tried these lines for volume, each in turn:
    volume 4:
    volume linuxmain
    ("linuxmain" is the partition label I gave the partition with cgdisk)
    For completeness, `diskutil list` on the Mac gives me:
    /dev/disk0
    #: TYPE NAME SIZE IDENTIFIER
    0: GUID_partition_scheme *251.0 GB disk0
    1: EFI EFI 209.7 MB disk0s1
    2: Apple_HFS Macintosh HD 124.6 GB disk0s2
    3: Apple_Boot Recovery HD 650.0 MB disk0s3
    4: 0FC63DAF-8483-4772-8E79-3D69D8477DE4 18.3 GB disk0s4
    5: 0FC63DAF-8483-4772-8E79-3D69D8477DE4 107.2 GB disk0s5
    Note that I've tried the above procedure both with the stock refind (refind-bin-0.8.0.zip) and the arch specific refind (refind-bin-gnuefi-0.8.0.zip).  In all cases I made sure all the refind files were removed before re-installing.  I've already spent a lot of time on this, and I'd really like to get Arch booting, so any help is greatly appreciated!
    Last edited by bwv549 (2014-05-15 02:26:11)

    I had this problem myself which got me going round in circles for ages.  The Arch Official rEFInd package contains v.0.7.9 (and is flagged out of date).  Apparently there is an Arch specific problem with v.0.7.9 and the most recent (until today) v.0.8.0.  The only way I could get it to work was to use the v.0.7.8 gnuefi binary from sourceforge.  I've been in touch with the developer who has released v.0.8.1 today which he thinks fixed the bug, but I've yet to test it....  Let us know how you get on.
    When the package gets updated I would hope for it to be built from gnuefi, not the tianocore EDK2010 as it is currently, nor even 2014 which all seems unduly burdonesome....

  • Invalid SWC file using ADT to create an Android Native Extension

    I'm following a tutorial on youtube:
    https://www.youtube.com/watch?v=dfq9wiuLks4
    Using Flash Builder 4.6 and and when I get to the point where the project is supposed to be built using adt I run into the following error:
    "Invalid swc file:"
    Here is the command I'm using:
    adt -package -storetype PKCS12 -keystore newcert.p12 -storepass mypassword -tsa none -target ane notifications.ane build/ane/Notifications.swc -platform Android-ARM -C build/ane/Android-ARM
    Ive tried setting the Additional Compiler Arguments in the Flex Library Compiler to this: "-locale en_US -swf-version 19"
    Still the same result, If anyone can help me figure out how to trouble shoot this or isolate the problem I would greatly appreciate it.
    Thanks

    Any progress on it? I have the same problem...
    Thanks

  • Casio G'zOne "package file is invalid"

    I just bought the Casio G'zOne and everytime I download an ap for it I get "Package file is invalid".  I use Play Store to get the ap.  I tried clearing the cache and data for Play Store, I turned the phone on and off, I took the battery out of the phone and turned it back on, I looked for System updates and downloaded any updates needed.  I bought 2 of these phones.  Both work perfect for everything except for downloading aps.  Is there a software update I am missing or are these phones too old to get newer aps.  Aps I have been trying to get are Words with friends, weatherchannel, Angry Birds, etc.  It seems that if I keep trying, then one of the phones will finally successfully download the ap and work.  But I watch my nieces with their Droid and Samsung Galaxy and they don't have any of these problems.  Any help would be apreciated.

    Thanks for all the help.  I talked to my Verizon dealer the other day and after I left them and got back home, I realized what the problem was.  My WiFi was causing the conflict for some reason.  My verizon dealer said some phones were not able to use the wifi to download aps or the wifi wasn't a good enough connection.  I turned the WiFi off on the phone and everything worked using 3G.  So I did get my 2 phones to download aps.  Thanks for all your help on this issue.
    I did have one other question.  Is there a way to set my time manually on my phone to a different time zone?  I live on the border of a time zone and the towers I use are both on central time, where I live on mountain time.  My old flip phone allowed me to put the current time zone time and also the Denver time - both at the same time.  I mostly work on the mountain time zone, but I do cross into the central time zone, so that really worked good on my flip phone.  But my new phone says "automatically set time" and I cannot control how the time is shown on the screen.

  • Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

    Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
    The paid upgrade of "Converter" doesn't work.
    Instructive documentation - not very good.
    Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
    Could use timer tracking of the record process.
    Are there operating system limitations? (Have Windows XP Pro)

    That is an issue for the developer of that Download Helper.

  • Adobe air invalid package on android 4.2.1

    I have android 4.2.1 on transformer pad tf300t and when I try to update adobe air it says invalid package.

    here's the stack trace from your app.
    E/AndroidRuntime( 2967): FATAL EXCEPTION: main
    E/AndroidRuntime( 2967): java.lang.RuntimeException: Unable to start receiver com.sputnik.wispr.NetworkScanReceiver: java.lang.StringIndexOutOfBoundsException: length=0; index=0
    E/AndroidRuntime( 2967): at android.app.ActivityThread.handleReceiver(ActivityThread.java:2383)
    E/AndroidRuntime( 2967): at android.app.ActivityThread.access$1500(ActivityThread.java:141)
    E/AndroidRuntime( 2967): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:1310)
    E/AndroidRuntime( 2967): at android.os.Handler.dispatchMessage(Handler.java:99)
    E/AndroidRuntime( 2967): at android.os.Looper.loop(Looper.java:137)
    E/AndroidRuntime( 2967): at android.app.ActivityThread.main(ActivityThread.java:5039)
    E/AndroidRuntime( 2967): at java.lang.reflect.Method.invokeNative(Native Method)
    E/AndroidRuntime( 2967): at java.lang.reflect.Method.invoke(Method.java:511)
    E/AndroidRuntime( 2967): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:793)
    E/AndroidRuntime( 2967): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:560)
    E/AndroidRuntime( 2967): at dalvik.system.NativeStart.main(Native Method)
    E/AndroidRuntime( 2967): Caused by: java.lang.StringIndexOutOfBoundsException: length=0; index=0
    E/AndroidRuntime( 2967): at com.sputnik.wispr.util.WiFiPrioritisation.QuoteSSID(WiFiPrioritisation.java:65)
    E/AndroidRuntime( 2967): at com.sputnik.wispr.util.WiFiPrioritisation.enablePreferredNetwork(WiFiPrioritisation.java:335)
    E/AndroidRuntime( 2967): at com.sputnik.wispr.NetworkScanReceiver.onReceive(NetworkScanReceiver.java:65)
    E/AndroidRuntime( 2967): at android.app.ActivityThread.handleReceiver(ActivityThread.java:2376)
    E/AndroidRuntime( 2967): ... 10 more
    W/ActivityManager( 574): Force finishing activity com.bt.mnie.wispr/.CoreActivity
    W/ActivityManager( 574): Activity pause timeout for ActivityRecord{4293be88 u0 com.bt.mnie.wispr/.CoreActivity}

  • Android File Transfer not working with MAC OSX 10.9.5

    I have a Kurio Extreme for my child, and I have downloaded and used Android File Transfer in the past. Recently two things have changed. My OS, and the Kurio tablet. I attempted to use it today, and the device is not recognized.
    I reached out to the Kurio Helpdesk and they state that the issue is either with the OS software or AFT. I have removed AFT, rebooted the computer, downloaded it again, all to no avail.
    Any ideas on how to fix this issue?

    This problem could arise if you have installed Kies. What it does is, it installs drivers which is not compatible with android file transfer app.
    Now the solution for this problem is properly uninstall kids from your mac, to do this follow the steps:
    1. Check the security and privacy settings in your system preference whether the settings for "Allow apps download from" to "Anywhere" (to set this first click the lock button on the left of your screen by entering your password, this will enable the option to be changed)
    2. After you are done with the first step open the kies installation file (file that is used to install kies, if you have deleted the file, download it again) open the file there you will find an option "uninstall". Click and follow the instruction.
    3. When you have successfully deleted the app, restart your mac.
    4. Install Android file transfer app if you haven't done it yet.
    5. Connect your android device
    6. BANG! It will work just fine. Hope it helps!!

  • Package file invalid when installing on Motorola Razr i

    I have tried several times to install the app on my Razr i but it always says that the package file is invalid

    Hi Ignacio!
    Same problem, on same phone!
    The Motorola Razr I has Intel Medfield X86 architecture. Different architecture of ARM Processor
    Motorola Razr i - XT-890 (Android 4.0.4 or 4.1.2) is sold on Europe and Latam
    Thanks,
    Thiago

Maybe you are looking for