Invalid path in OBIEE 11.1.1.5

Hi,
I have intergrated with OBIEE 11.1.1.5 with portal.While viewing the reports a particular report throws an error
Error:
Dashboard Display Error
Invalid path () -- path not found in dashboard
Error Details:
Error Codes: QM3V3HLV
Can you someone please help me on this?
Thanks in Advance,
Padmini

Hi,
please refere this link.....
http://www.serkey.com/tag/error-codes-qm3v3hlv/
mark if helpful/correct...
thanks,
prassu

Similar Messages

Unable To Open Saved WI Reports in IE 9-Receive Invalid Path Error

I am unable to open any saved web intelligence report documents in Internet Explorer 9. When I select view or modify, the java report panel does not initiate but instead gives me an error stating "Invalid path /AnalyticalReporting/WebiView was requested". Everything works fine if I use Firefox 9. Is it a setting I need to change in internet explorer somewhere or is it a compaitibility issue?
I can create new web intelligence queries and reports in IE 9, but if I try to open a report that I saved, I get an error.

Hello,
If you are using the older version of BOXI in that case IE 9 is not supported. Please check your Boxi version which supports IE 9 or not.
Thanks,
Rcse2006

Invalid path in XML Publisher temporary directory

Hi
Even if i am setting this temporary directory property in xml publisher admin to an invalid path, i am able to see the template outputs. i restarted the apache server. Do i need to do any more changes?
Thanks
Satya

Can i get any clue on this?

Invalid path to MS-Word templates folder

Hi all!!!
I set in System Initialisation -> General Settings -> Path -> Microsoft Word Templates Folder: "C:\Program Files (x86)\SAP\SAP Business One\WordDocs\".
When i click on the MS_WORD icon on a Sales Order i get the message "Invalid path to MS-Word templates folder".
Why???

Hi Gianluca,
Please try to specify Microsoft Word Templates Folder with the Language folder at the end.
( e.g. C:\Program Files (x86)\SAP\SAP Business One\WordDocs\English\ )
Please also check whether MS Office application is installed on the client and if these files are in the selected folder:
- CustAccounts.doc
- Docmnhl1.doc
- Header.txt
- Lines1.txt
- Lines2.txt
- Lines3.txt
- mnhlDot1.dot
- ToDoLetters.doc
hope it helps,
Regards,
Ladislav Meszaros
SAP Business One Forum Team

Invalid path to word templates

Hello,
I am trying to export delivery note to word, but no way. It appears the following message:
"Invalid path to word templates"
I have checked under administration that the path set there is correct and the macros are with low security level.
Thanks in advance

Hi,
If you have checked the administration --> general settings --> path, you could also check if the folder still exists and allowable to use by user. btw, what version of SBO you are using ?
Rgds,

Invalid Path for target file, check if connector is deployed correctly

Hi all,
I've got a tricky problem over here: we are using OMB scripts for generating simple extract mappings that just copy data from an oracle source table to a flat file on a directory. Up untill now ( with version 11.1 ) this did not pose any troubles, but now we are using 11.2 for the first time and we don't get the mappings to execute. Generating, validating and deploying all works fine, only executing fails with the error: "Invalid Path for target file, check if connector is deployed correctly". It ends to rapidly, so I'm assuming the problem lies in the repository and not on the database itself.
I'm pretty sure all locations are defined as needed, flat file operator in the mapping has correct location, the flat file module has the same location,...
I tried almost everything: recreate oracle module, recreate flat file module, unregister and recreate db location, unregister and recreate dir location, recreate mapping and flat file, export/import...
The strange thing is, I was able to execute a mapping once. Although it ended with an error (due to a function in the mapping), it created the file correctly. After that I needed to update the directory path of the target location and from then on, I always got the error above, and I don't see a good reason.
Any suggestions??
Tnx,
Michel

That error is displayed when the generated code fails to execute with one of the following database errors;
UTL_FILE.INVALID_PATH
UTL_FILE.INVALID_OPERATION
UTL_FILE.INVALID_FILEHANDLE
So its worth checking the generated code for that map and searching for the code around UTL_FILE.FOPEN and seeing what the path and the file name in the code are. Maybe the file is created with permissions such that it can be created but not then re-written and its an OS permissions thing (such as UMASK settings).
Cheers
David

When updating .lbi files in DreamWeaver CS4 I get an invalid path.

When I make changes to my .lbi files in DreamWeaver CS4 I and try to update them I am getting
   item Library\dreamweaver\themed_image.lbiE:\RCG\Web Sites\2011 RCG Working Web Site\Library\dreamweaver\themed_image.lbi contains an invalid path.
    item Library\dreamweaver\logo.lbiE:\RCG\Web Sites\2011 RCG Working Web Site\Library\dreamweaver\logo.lbi contains an invalid path.
    item Library\dreamweaver\icons.lbiE:\RCG\Web Sites\2011 RCG Working Web Site\Library\dreamweaver\icons.lbi contains an invalid path.
    item Library\dreamweaver\menu_top.lbiE:\RCG\Web Sites\2011 RCG Working Web Site\Library\dreamweaver\menu_top.lbi contains an invalid path.
    item Library\dreamweaver\menu_side.lbiE:\RCG\Web Sites\2011 RCG Working Web Site\Library\dreamweaver\menu_side.lbi contains an invalid path.
    item Library\dreamweaver\$_whats_new.lbiE:\RCG\Web Sites\2011 RCG Working Web Site\Library\dreamweaver\$_whats_new.lbi contains an invalid path.
files examined: 136
files updated: 0
files which could not be updated: 0
total time: (0:00:13)
Here is the code in one of the files for my side menu.. I do not see what is wrong and was wondering if anyone could help. Thank you.
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">

<div class="maincontent">
<h3>MainMenu</h3>
<div class="bg">

<div id="ddsidemenubar" class="sidemenu">
<ul>
<li><a href="../../index.htm"             title="Home">                        <span>Home</span></a></li>
<li><a href="../../catalog_opening.html"         title="Catalog"     rel="sub1">        <span>Catalog</span></a></li>
<li><a href="../../services.htm"         title="Services"    rel="sub2">        <span>Services</span></a></li>
<li><a href="../../photo_gallery.htm"     title="Photos">Gallery<span></span></a></li>
<li><a href="../../sitemap.htm"         title="Search">                        <span>Search</span></a></li>
</ul>
</div>
<script type="text/javascript">
ddlevelsmenu.setup("ddsidemenubar", "sidebar") //ddlevelsmenu.setup("mainmenuid", "topbar|sidebar")
</script>

<ul id="sub1" class="ddsubmenustyle sidesubmenu">
<li><a href="../../catalog_opening.html">Senior Class T-Shirts</a>
<ul>
    <li><a href="../../catalog_seniorclass.html">Page 1</a></li>
    <li><a href="../../catalog_seniorclass2.html">Page 2</a></li>
</ul>
</li>
<li><a href="../../catalog_opening.html">School T-Shirts</a>
<ul>
    <li><a href="../../catalog_school1.html">Page 1</a></li>
    <li><a href="../../catalog_school2.html">Page 2</a></li>
</ul>
</li>
<li><a href="../../catalog_opening.html">Montana T-Shirts</a>
<ul>
    <li><a href="../../catalog_montana1.html">Page 1</a></li>
    <li><a href="../../catalog_montana2.html">Page 2</a></li>
    <li><a href="../../catalog_montana3.html">Page 3</a></li>
    </ul>
</li>
<li><a href="../../catalog_misc.html">Misc T-Shirts</a>
</li>
</ul>

<ul id="sub2" class="ddsubmenustyle sidesubmenu">
<li><a href="../../direct_to_garment.html">T-Shirt Printing</a> </li>
<li><a href="../../computer_design.html">Computer Design</a> </li>
<li><a href="../../signs.html">Signs</a> </li>
<li><a href="../../vehicle_graphics_and_wraps.html">Vehicle Graphics/Wraps</a> </li>
<li><a href="../../airbrush.html">Airbrush</a> </li>
</ul>


</div></div>


Are all of your pages that are linked to this on the same directory level?
The ../../ in front of every link means "go up two directory levels". If there are no pages, or if some of the pages are not at that directory level, the links would be going to nothing.
I don't use library items myself, so I'm not sure if that has anything to do with it, but the "bad path" in your error report leads me to think some of those paths (since they're the only ones in the code) could be pointing to the wrong locations.
My response will also bump your question back to the top of the pile. Maybe someone else will have a good idea of what's actually happening.

PL/SQL : Error: invalid path ORA-29280

I'm trying to get this work but what can I do ? does anybody know how to resolv this problem
code : (for the exemple)
DECLARE
     fich     UTL_FILE.FILE_TYPE;
BEGIN
     fich := UTL_FILE.FOPEN('e:\','test.lst','W');
     UTL_FILE.PUT(fich,'something');
     UTL_FILE.FCLOSE(fich);
EXCEPTION
     WHEN utl_file.invalid_path THEN
          DBMS_OUTPUT.PUT_LINE('Error: invalid path ' || SQLERRM);
          UTL_FILE.FCLOSE(fich);
     WHEN utl_file.write_error THEN
          DBMS_OUTPUT.PUT_LINE('Error: write error ' || SQLERRM);
          UTL_FILE.FCLOSE(fich);
     WHEN others then
          DBMS_output.put_line('other error : '||SQLERRM);
          UTL_FILE.FCLOSE(fich);
END;
Always return :
ERROR at ligne 1 :
ORA-29280: invalid path
ORA-06512: at "SYS.UTL_FILE", line 18
ORA-06512: at "SYS.UTL_FILE", line 424
ORA-06512: at line 4
If someone can tell me where's the fault. thanks in advance

Also note, that directories you want to have access to should be listed in UTL_FILE_DIR server parameter (you edit it in your init.ora and restart the server for changes to take effect.) Setting it to * (everything everywhere) is NOT recommended as it opens whole file system for access and may lead to security problems.

400   Bad Request - Invalid path /b2c/secure was requested

Hi,
I have two jsp pages. first page is included as a link in one of the inc.jsp in B2C application.
This page has few input fields and upon submit button. I get error message
400 Bad Request - Invalid path /b2c/secure was requested
the action tag written in config.xml is like:
<action path="/b2c/xyz" type="package_name.xyz">
          <forward name="success" path="/b2c/Page2.jsp"/>
          <forward name="failure" path="/b2c/Page2.jsp"/>
          </action>
in web.xml:
<servlet>
        <servlet-name>Page1.jsp</servlet-name>
        <jsp-file>/b2c/Page1.jsp</jsp-file>
        </servlet>
    <servlet>
        <servlet-name>Page2.jsp</servlet-name>
        <jsp-file>/b2c/Page2.jsp</jsp-file>
    </servlet>
Please let me know if you could help me with the needful. Appreciate your earliest response.

Hi Bharathi,
If you are embedding a link in jsp where you are directly calling another jsp, its always better to code it like this
<a href="<isa:webappsURL name="/b2c/Page1.jsp"/>" target="_new">
There is no need to make any changes in web.xml file.
If in your inc.jsp you want to call an action class on click on a link than call a javascript method onclick on that link
test() is a javascript method where you will call your action class like
function test() {
       isaTop().parent.location.href="<isa:webappsURL name='/b2c/xyz1.do'/>";
Changes in config.xml should be like
<action path="/b2c/xyz1" type="package_name.xyz">
          <forward name="success" path="/b2c/Page2.jsp"/>
          <forward name="failure" path="/b2c/Page2.jsp"/>
</action>
Make use of "<isa:webappsURL name='/test/test.jsp'/>" and it will work. Hope this helps you.
Regards,
Arshi
Edited by: Arshi Arshi on Oct 3, 2009 9:50 AM

INVALID PATH FOR TARGET FILE - 11g

I had several mappings that's need to run almost all of my mappings got this same error,
OWB Owner: owb_rpo_ev04
User Owner: owb_rpu_ev04
h2. "INVALID PATH FOR TARGET FILE, CHECK IF CONNECTOR IS DEPLOYED CORRECTLY"
-Flat File Location has been indicated
-Locations has been deployed
-Files Location has been deployed
-Physical Location has been created
Two mappings is working prefectly without any error, but to several mappings the one with Flat Files Location are the one with the error when executing. I already grant permission owb_rpu_ev04 to UTL_FILE. I even create a synonym for UTL_FILE the i can used "ECT_FILE"
Files are in FTP,
h2. partial script
OUTPUT_FILE ECT_FILE.file_type;
FILENAME VARCHAR2(50);
FILEPATH VARCHAR2(50);
email_subject VARCHAR2(200);
email_body_hdr VARCHAR2(10000);
crlf VARCHAR2(2) := chr(13)||chr(10);
OWB_FAILURE_RUN EXCEPTION;
PRAGMA EXCEPTION_INIT (OWB_FAILURE_RUN,-20000);
PROCEDURE CHK_EXECUTION (EXEC_FLAG IN NUMBER) AS
BEGIN
IF EXEC_FLAG = 3 OR EXEC_FLAG = 4 THEN
RAISE OWB_FAILURE_RUN;
END IF;
END;
BEGIN
FILEPATH := 'ECTDM_EV04_OUTFILE_DIR';
-- ECTBusiness.csv
ECT_RUN_BATCH_MAP1 ( 'PLSQL', 'ECTDM_IN_M_BUSINESS_L1', 'OWB_RPU_EV04_LOCATION', 'ERROR_DETAILS', 0, EXEC_FLAG, 'A','DM');
CHK_EXECUTION (EXEC_FLAG);
Edited by: ellenore on Apr 26, 2012 5:52 AM
Edited by: ellenore on Apr 26, 2012 6:03 AM

That error is displayed when the generated code fails to execute with one of the following database errors;
UTL_FILE.INVALID_PATH
UTL_FILE.INVALID_OPERATION
UTL_FILE.INVALID_FILEHANDLE
So its worth checking the generated code for that map and searching for the code around UTL_FILE.FOPEN and seeing what the path and the file name in the code are. Maybe the file is created with permissions such that it can be created but not then re-written and its an OS permissions thing (such as UMASK settings).
Cheers
David

Reporting Services Report Subscription. Invalid path that has spaces within path

I am trying to have subscriptions for reports in this folder: servername\Admissions\REPORTS\End Of Month Reports\Reporting Services Report Subscriptions
It keeps coming back invalid path and its because of the spaces for the foldername. If I send it to the REPORTS folder, I have no problem. How can I fix this for a shared network folder?

Hi jachopich56.
According to your description, you come across an issue when distributing a report to a file share.
In Reporting Services, when we distribute a report to a file share, we must specify an existing folder as a target folder. We should make sure the folder we specify is accessible over a network. When specifying the target folder, we should use UNC format.
In your scenario, please check if you can access the folder with UNC path you specified in the subscription. If issue persists, please check the Reporting Service error log (default location: %programfiles%\Microsoft SQL Server\<SQL Server Instance>\Reporting
Services\LogFiles) around the time that the issue occurs. Please post the detail error log for our analysis if possible.
Reference:
File Share Delivery in Reporting Services
If you have any question , please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Invalid path /AFDashboardPageView was requested

After upgrade my Business Object 3.1 SP0 to SP3 with Fix Pack 3.4 appear in the home of InfoView this error: HTTP Status 400 - Invalid path /AFDashboardPageView was requested.
I can not upgrade more (i´m in the top level), how can solve it?
Thanks in advance,
Regards,

Can you you please try the following?
1) Stop the tomcat
2) Go to <BOBJ installation path>\TOmcat55\webapps and remove the following directories:
- InfoViewApp
- InfoViewAppActions
3) Start the tomcat
Try again now to start the InfoView.
I asumme that you are using WIndows. The path for Unix is similar ( <bobj installation paht>\tomcat\webapps)
Do you have any integraiton Kit installed?
Regards,
Stratos

Invalid path

hi,
i have written a procedure to get the output in excel file. but here i am getting error for invalid path.
PROCEDURE TEXT IS
A utl_file.file_type;
S VARCHAR2(10000);
CURSOR C1 IS SELECT * FROM EMP ORDER BY EMPNO;
BEGIN
A:=utl_file.fopen('c:\','emp.xls','W');
FOR I IN C1
LOOP
utl_file.PUT_line(A,i.empno);
end loop;
utl_file.fclose(A);
END;
when i executed got an error like that
ERROR at line 1:
ORA-29280: invalid directory path
ORA-06512: at "SYS.UTL_FILE", line 33
ORA-06512: at "SYS.UTL_FILE", line 436
ORA-06512: at "SCOTT.TEXT", line 10
ORA-06512: at line 1
question is what will be the file destination ?
please help..
thanks
Edited by: Hi FRNzzz!! on Aug 28, 2010 10:38 AM

i have created directory as sysdba
create or replace directory my_dir AS '/tmp';
GRANT READ,WRITE ON DIRECTORY my_dir TO PUBLIC;
PROCEDURE TEXT IS
A utl_file.file_type;
S VARCHAR2(10000);
CURSOR C1 IS SELECT * FROM EMP ORDER BY EMPNO;
BEGIN
A:=utl_file.fopen('MY_DIR','emp.xls','W');
FOR I IN C1
LOOP
utl_file.PUT_line(A,i.empno);
end loop;
utl_file.fclose(A);
END;
when run this procedure getting error
ERROR at line 1:
ORA-29283: invalid file operation
ORA-06512: at "SYS.UTL_FILE", line 475
ORA-29283: invalid file operation
ORA-06512: at "SCOTT.TEXT", line 10
ORA-06512: at line 1
please help

Invalid Path error

Hi, I'm using iplanet, but I'm sure the principle is the same for any server, ie. tomcat etc.
Using struts, there are certain urls (usually concerning .do extensions) that cause the server to complain - Invalid path /bal/bla was requested. These are genuinely bad paths, but the kind of thing that a user may accidentally enter.
Is there somewhere (in the web.xml?) that I can specify a catch-all page that the server will redirect to in the case of such errors? Remember it's not an exception of any kind, so the usual exception page thing doesn't work.

Dissapointing not to get any responses, I thought this would probably be quite straightforward.

Templates "invalid path"

Hi can anyone help I can't seem to use templates to update
pages, or open attached templates. I keep getting the error message
"contains an invalid path" ?
Thanks
Steven

Are your local sites on your local hard drive?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Steve84" <[email protected]> wrote in
message
news:e4a82a$h2t$[email protected]..
> Hi can anyone help I can't seem to use templates to
update pages, or open
> attached templates. I keep getting the error message
"contains an invalid
> path" ?
>
> Thanks
> Steven

Invalid path in OBIEE 11.1.1.5

Similar Messages

Maybe you are looking for