Invalid read mode error in BEx

Hello,
I keep getting the error - Invalid Read Mode. To Repair: RSRT (OK code =RMRP) 0 " for a particular infocube in 2.1C version.
This error come when i go to change query - check query.
I tried changing the read mode through RSRT, but still keep getting the same error.
Please help.
Thanks,
Abhi

Hi Aabhi,
Try the following
a> assign a request query
b>Try using object changeability option in transport connection.
Hope this will help you.

Similar Messages

  • Terminate: Invalid read mode

    After checking query, system show me the error message - Terminate: Invalid read mode, the detailed information as below, please help to solve this issue. Thanks a lot!
    Terminate: Invalid read mode [A017(BRAIN)]
    Diagnosis
    If queries (often unintentionally) are assigned the read mode "Query to Read All Data at Once", this often results in performance problems. To eliminate this problem, this warning is displayed when you execute a query with this read mode when the query is generated.
    System Response
    Procedure
    Procedure for System Administration
    Before you execute the query, repair the read mode:
    You can repair the read mode for this query in the Query Monitor (transaction RSRT1). You can set the read mode for the selected query by choosing Query -> Read Mode.
    If this warning is displayed when you check a query, you need to change the default read mode for new queries in the InfoCube in InfoCube maintenance. In InfoProvider maintenance, choose Environment ->InfoProvider Properties -> Change and make the relevant settings on the Query/Cache tab page.

    Hi,
    Goto Tcode -  "RSRT ", in that specify the query name and change the Read mode.
    After changing this again execute the Query in that RSRT, adn check whether every thing is ok or not....
    Assign points if it helps.......

  • Invalid Read Mode

    Hello BW Experts
    While running the query I am getting the error invalid read mode. Is it any settings that we could do in the query level or RSRT. Please suggest to get rid of this error.
    Thanks,
    BWer

    hi BWer,
    oss note 432596
    Change the read mode before you execute the query: You can change the read mode of a specific query using transaction RSRT. Choose Query -> Read mode to set the read mode for a selected query. If this warning message is displayed when you call up a query, you have to change the default read mode for new InfoCube queries in Customizing for BW (Tools > Business Engineer > BW Customizing > SAP Reference IMG ). The default read mode is under the node "BW Customizing Implmentation Guide > Business Information Warehouse > Reporting-Relevant Settings > Set Read Mode for InfoCube
    You can also change the read mode for all queries and the default read mode for all InfoCubes using transaction RSRT. Choose Environment -> Repair read mode. This is where you can change all non-allowed read modi to "Subsequenlty read by navigation".

  • Invalid read mode while executing the query

    Hi,
    I have developed a query based on a cube in MM module.
    When I try to execute the query, the following error is being displayed:
    Invalid read mode
    Message no. BRAIN017
    Diagnosis
    If queries (often unintentionally) are assigned the read mode "Query to Read All Data at Once", this often results in performance problems. To eliminate this problem, this warning is displayed when you execute a query with this read mode when the query is generated.
    Procedure for System Administration
    Before you execute the query, repair the read mode:
    u2022     You can repair the read mode for this query in the Query Monitor (transaction RSRT1). You can set the read mode for the selected query by choosing Query -> Read Mode.
    u2022     If this warning is displayed when you check a query, you need to change the default read mode for new queries in the InfoCube in InfoCube maintenance. In InfoProvider maintenance, choose Environment -> InfoProvider Properties -> Change and make the relevant settings on the Query/Cache tab page.
    Please let me know what are the exact setting that I need to do and where.
    Thanks in advance.
    Will assign points for the solution.
    Thanks & Regards.

    Hi Ganesh,
    You can change the read mode by going to transaction RSRT, entering the query name and then clicking the properties button. A dialog box will then be displayed that allows you to change the read mode.
    The question of what's the best read mode for you query depends on the requirements of the query:
    If you choose "read all data at once", it will take quite awhile before the first view of the query is shown. This is because it basically reads all data needed for your query (e.g. data for hierarchy nodes etc). However, after the initial view, successive navigations might be a lot faster.
    The read mode "Read data during navigation and expansion of hierarchies" is usually the best mode. The initial view will show up in the least amount of time in this mode. However, when the users start to navigate, data will then be read from the database (aggregates, or the main cube tables) or the cache.
    The read mode "Read data during navigation" is like the "Read data during navigation and expansion of hierarchies" mode. However, it will also read the data for the hierarchy nodes. Expansions of the hierarchy will therefore be faster in this mode. Of course, there's additional overhead for the initial view.
    Hope this helps. Cheers.

  • Invalid open mode ERROR

    Good Morning: I am trying to open a database in archive mode and the output is this error:
    SQL> connect / as sysdba
    Connected.
    SQL> shutdown
    Database closed.
    Database dismounted.
    ORACLE instance shut down.
    SQL> startup mount
    ORACLE instance started.
    Total System Global Area 581506616 bytes
    Fixed Size 452152 bytes
    Variable Size 402653184 bytes
    Database Buffers 167772160 bytes
    Redo Buffers 10629120 bytes
    Database mounted.
    SQL> alter database open archivelog;
    alter database open archivelog
    ERROR at line 1:
    ORA-02288: invalid OPEN mode
    I already set the parameter LOG_ARCHIVE_START TO TRUE.
    Any idea why is this error?
    Thanks a lot

    [email protected]> alter database archivelog
    2 /
    Database altered.
    [email protected]> alter database open
    2 /
    Database altered.
    [email protected]> select *
    2 from v$instance
    3 /
    Best Regards
    Krzstian zieja - mob

  • ERROR = invalid call mode [dynphold.c   195]

    Hi
    It´s my firts post here, so be nice with me.
    I have this error in the trace file of my WP DIAG
    "ERROR => invalid call mode "
    I searched notes and in this forum but i didn´t have luck
    Realease R3 4.6C
    Kernel 4.6D
    My SP level
    SAP_BASIS      46C                     0050    SAPKB46C50 
    SAP_ABA         46C                     0050    SAPKA46C50 
    SAP_APPL       46C                     0050    SAPKH46C50

    This is the entire error that appears in the SM21
    Y Wed Nov 26 16:31:53 2008                         
    Y  *** ERROR => invalid call mode [dynphold.c   195]
    I searched same dump in that hour and I founded this
    ABAP runtime errors    CONVT_NO_NUMBER                                      
           Occurred on     26.11.2008 at 16:21:57                                                                               
    >> Short dump has not been completely stored. It is too big.                                                                               
    Unable to interpret " 2.902.321,540" as a number.                                                                               
    What happened?                                                                               
    The current ABAP/4 program "ZVEMMWMS_RELACION_EMBARQUE " had to be terminated
    because                                                                    
    one of the statements could not be executed.                                                                               
    This is probably due to an error in the ABAP/4 program.                                                                               
    What can you do?                                                                               
    Note the actions and input that caused the error.                                                                               
    Inform your SAP system administrator.                                                                               
    You can print out this message by choosing "Print". Transaction ST22        
    allows you to display and manage termination messages, including keeping    
    them beyond their normal deletion date.                                                                               
    Error analysis                                                                               
    The program attempted to interpret the value " 2.902.321,540" as a number, but
    since the value contravenes the rules for correct number formats,             
    this was not possible.                                                                               
    How to correct the error                                                                               
    Whole numbers are represented in ABAP by a series of numerals with a          
    sign in front of them if necessary.                                           
    The following floating point number representations are possible in           
    ABAP:                                                                         
      [sign][mantissa]E[sign][exponent]                                           
      [sign][whole number part].[fractional part]                                 
    z.B. -12E+34, +12E-34, 12E34, 12.34                                                                               
    If the error occurred in one of your own programs or in an SAP program        
    that you modified, try to correct it yourself.                                                                               
    If the error occurred in a non-modified SAP program, you may be               
    able to find a solution in the SAP note system.                               
    If you have access to the note system yourself, use the following             
    search criteria:

  • Invalid Color Space error after update Reader to 9.3.3

    After updating Adobe Reader to 9.3.3 I run into the Invalid Color Space error when trying to open a PDF file created with CorelDraw 12 in the format PDF/X-1A.  This format needed by a printing office to print the file. The strange thing is that Reader opens older PDF files exported from CorelDraw in thsi format normally without the error message.
    It happens only with PDF exports made after the Reader update. CorelDraw settings are as previously used.
    Exports in other formats, other than  PDF/x-1, X-1A and X-3 open normally.  How to solve this??

    any suggestions?

  • Read mode and plan mode cube error

    is there any program to switch the cube from read mode to plan mode ?
    my one job has been failed due to below error message ....
    InfoCube MIPDEDWC1 is not in "real-time mode". Please change first
    What does it mean ?
    Regards,

    Hello jain akshay,
    Yes you have to change it, you can only do that for cubes defined as transactional in the first case.
    Go to rsa11->search for your InfoProvider->right-click on it->Select the option "Change Real-Time Load Behaviour..."
    Change the bullet to the other option presented there.
    Do whatever you were trying to do again.
    This should work.
    After loading your request you have to change it back to were it was again, cause if you don't do that your cube is ready for receiving data but not for manual inserting data (planning data).
    Please assign points,
    Diogo.

  • How can a user enter a value in the field which is in read mode.

    Hi all,
          I am creating a badi for the valuation class.when ever i execute the mm02 transaction.if an invalid valuation class is entered,my error message is poping up.but it is coming in the display mode.i should get the valuation class field in the read mode.
    Regards,
    charita.

    Hi Charita,
    Use information message instead of Error message.Then it will not give u that field in non-editable mode.
    <b>Reward points if it solves ur query or answer is helpful</b>
    Thanks
    Chinmay

  • Window 8.1 update & invalid security certificate errors

    I set up my new PC 2 days ago running Windows 8.1. I was able to visit all websites, including secure ones, w/no issues via Firefox. Last night, suddenly I was unable to access many secure websites. These include Google (Gmail) & Ilines (email). Here is a copy of the Google error:
    "mail.google.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer)"
    There is no button to bypass, as I have seen in the past. I tried deleting cert8.db which didn't resolve anything. I have also tried adding exceptions which also don't resolve the issue.
    I searched support & found the link for the MS document (link below) indicating that FF & Windows Family Safety certificates are not playing nice.
    http://support.microsoft.com/kb/2965142/en-us#appliesto
    I tried to follow the guide, but when I get to step 6, there is no Microsoft Family Safety Certificate in the Trusted Root Certificates Authorities to export. For reference, I do not specifically have Family Safety enabled & am running my PC as admin, no other users. I personally have no use for this but it is my understanding that it cannot be uninstalled, either.
    I have spent hours researching & making adjustments to different settings to no avail. It is frustrating enough setting up a new PC & transferring info w/out this extra hassle. Does anyone have any other suggestions? FF is my preferred browser, but if this can't be resolved I will need to use something else so that I can access these important websites.

    Thanks for the feedback cor-el. Here are the results:
    1. Installed Kaspersky certificate per link= no change
    2. Turned off Kaspersky= able to log in to Gmail but not the other secure sites I am having probs with
    3. Booted in Safe Networking mode= able to log in to Gmail but not the other secure sites. Same blocking errors on Gmail, etc when returned to reg mode.
    Just FYI, I get 2 different secure connection errors:
    Gmail: "mail.google.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer)"
    Ilines: "Secure Connection Failed An error occurred during a connection to mail.ilines.net. Peer's certificate has an invalid signature. (Error code: sec_error_bad_signature)"

  • Download Helper, even with paid converter upgrade, gives "Invalid Capture File" errors and will not record audio, with "File Creation Error - Unable to rename/copy audio file" Error.

    Download Helper Screen Capture worked to capture video if the default "no audio" option is active. But, no audio. The "speakers" or "microphone" audio options are confusing....the audio to be captured is from the video, so what do you choose? With either "speakers" or "microphone" selected, the captured file has poor audio and no video. Re-capture efforts (speakers) get "Invalid capture file error" and "File Creation error- Unable to rename/copy audio file"
    The paid upgrade of "Converter" doesn't work.
    Instructive documentation - not very good.
    Suggestions - Need time delay between initiation of "Record" and starting the video to be recorded.
    Could use timer tracking of the record process.
    Are there operating system limitations? (Have Windows XP Pro)

    That is an issue for the developer of that Download Helper.

  • Invalid Key code Error while installing crystal report server 11

    While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
    MAILS--Dear Mohit,
    Thanks for the patience.
    We have received the below update from the Licensing Team.
    You received your permanent key in respect of these licenses - the key is  for Crystal Reports Server XI.
    You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer.  The software included was version XIR2, but you elected to use version XI instead and received key .
    You would need to enroll the licenses in maintenance if you want to upgrade them.
    In case of any queries please create a ticket via the Service Market Place.
    Regards,
    Jessy
    Customer Interaction Center
    SAP Active Global Support
    Hello Jessy,
    The customer received their permanent key in respect of these licenses - the key is  for Crystal Reports Server XI.
    They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer.  The software included was version XIR2, but they elected to use version XI instead and they received key .
    They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
    Kind regards,
    Rosemary
    From: BOSAPASIA
    Sent: 29 September 2009 05:49
    To: Savage, Rosemary
    Subject: FW: Crystal Reports Server Installation Issue
    Importance: High
    HI Rose ,
    Need your assistance on the below issue.
    Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
    He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
    Regards,
    Jessy
    CIC Team Lead
    Customer Interaction Center
    Global Support Centre India
    SAP Labs India Pvt Ltd
    Hi,
    Providing you with the required details to proceed further
    Registration Number-
    Registration Email Address-taxmantra.support
    And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
    Dear Mohitk,
    Thank you for your information.
    I checked with the concerned colleague and received the below update:
    Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
    If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
    If you did not register before, as the promotion is over so the key code could not be replaced.
    I request you to kindly check the same at your end and revert with the details.
    Moreover, there are two ways for Crystal Report customer to get support.
    One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
    A learning map was provided, listed on left column.
    The other is customer with only Crystal report product, the support is via SDN.
    http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
    Customers can first check whether other customer has got the same issue and find the reply from our engineers.
    You may also post your own thread for support.
    Anything else I could help, please do not hesitate to contact again.
    Hi,
    I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
    Please find attached the Scanned Document  containing the details as per the details required by you.
    Hope to see a quick resolution for the issue.
    Dear Mohit,
    Thank you for your e-mail.
    As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
    Your customer number:
    Your customer name and address:
    Purchase order number:
    Any other products purchased along with Crystal Reports Server 11
    Any S-User Id:
    Any old case ID:
    Please feel free to contact us if any further queries.
    Hi,
    I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
    We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
    "The product key code you have entered is incorrect"
    We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
    Please help us to resolve the issue as early as possible.
    My contact number:
    If you need any further information do let me know

    Ajit,
      By design, the product is not able to be installed under the superuser account.
    1.  Create a new user and specify a home directory for the user without a quota set.
    2.  Copy or move the installation files to a directory that the new user can read.  I suggest you move the installation files directly into the new user's home directory.
    3.  Logon as the new user (or su - newuser)
    4.  run the installation shell script using that new user's account.
    NOTE:  Ensure the system meets the requirements from the supported platforms documents.
    .Tony

  • Invalid column Index error - While consuming Calculation view via Native SQL

    Hi Experts,
    I am trying to consume a Calculation view (sql script one) , which has input parameters, via Native SQL in a ABAP program .
    Code snippet for the same would be as follows , Upon execution, it throws an error "Invalid Column Index (8) error " . Can anyone help what could be the issue here ?
    Thanks in Advance,
    Suma
    REPORT ZTEST_HANA2.
    *Report to consume Calculation view (script based) from ABAP
    PARAMETERS: ip_docnr type BELNR_D,
                ip_gjahr type GJAHR,
                ip_bukrs type BUKRS,
                ip_blgr type FAGL_RLDNR.
       DATA: LO_SQL_STMT TYPE REF TO CL_SQL_STATEMENT,
              LO_CONN     TYPE REF TO CL_SQL_CONNECTION,
              LO_RESULT   TYPE REF TO CL_SQL_RESULT_SET,
              LV_SQL      TYPE STRING,
              LR_DATA     TYPE REF TO DATA.
        DATA: LX_SQL_EXC           TYPE REF TO CX_SQL_EXCEPTION,
              LT_SEPMAPPS_CLSDINV  TYPE TABLE OF SEPMAPPS_CLSDINV,
              LV_TEXT              TYPE STRING.
        TRY.
    lv_sql = |SELECT * FROM "_SYS_BIC"."DEMO-ABAP/CA_GET_FI_DATA" | &&
                     |WITH PARAMETERS ('placeholder'= ('$$p_DOCNR$$','{ ip_docnr }'),| &&
                      |'placeholder'=('$$p_GJAHR$$','{ ip_gjahr }')| &&
                      |,'placeholder'= ('$$S_BUKRS$$','{ ip_bukrs }')| &&
                      |,'placeholder'= ('$$p_base_ledger$$','{ ip_blgr }') )| .
             LO_CONN = CL_SQL_CONNECTION=>GET_CONNECTION( ).
             "Create an SQL statement to be executed via the connection
              LO_SQL_STMT = LO_CONN->CREATE_STATEMENT( ).
             "Execute the native SQL query
             LO_RESULT = LO_SQL_STMT->EXECUTE_QUERY( LV_SQL ).
             "Read the result into the internal table lt_sepmapps_clsdinv
             GET REFERENCE OF LT_SEPMAPPS_CLSDINV INTO LR_DATA.
             LO_RESULT->SET_PARAM_TABLE( LR_DATA ).
             LO_RESULT->NEXT_PACKAGE( ).
             LO_RESULT->CLOSE( ).
             LO_CONN->CLOSE( ).
        CATCH CX_SQL_EXCEPTION INTO LX_SQL_EXC.
             LV_TEXT = LX_SQL_EXC->GET_TEXT( ).
             MESSAGE LV_TEXT TYPE 'E'.
        ENDTRY.

    Hi Suma,
    Post the SQL you success run directly on Studio together with error message (even if is the Invalid column index error).
    Check there if the parameters case is working properly... Is it really this confusing options:
    p_GJAHR
    S_BUKRS
    p_base_ledger
    Why not all lower or all upper? Anyhow you must test and find which option works according your modeling
    Regards, Fernando Da Rós

  • I am getting "ORA-00900: invalid SQL statement"  error.?

    I did installed oracle 11gR2. and used "DBMS_METADATA_DIFF.COMPARE_ALTER('TABLE','TBL_A','TBL_A','USER1','USER2')"   to see the result like below,  but I am getting "ORA-00900: invalid SQL statement"  error.   Any idea?
    I am using:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE 11.2.0.1.0 Production
    TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    SQL> desc user1.tbl_a
    Name                                      Null?    Type
    FIELD_A1                                  NOT NULL NUMBER
    FIELD_A2                                           VARCHAR2(20)
    FIELD_A4                                  NOT NULL NUMBER(5,2)
    FIELD_A5                                           VARCHAR2(10)
    FIELD_A6                                  NOT NULL NUMBER(2)
    SQL> desc user2.tbl_a
    Name                                      Null?    Type
    FIELD_A1                                  NOT NULL NUMBER
    FIELD_A2                                           VARCHAR2(50)
    FIELD_A3                                           DATE
    FIELD_A4                                           NUMBER(5,2)
    FIELD_A5                                  NOT NULL VARCHAR2(10)
    SQL> select dbms_metadata_diff.compare_alter('TABLE','TBL_A','TBL_A','USER1','USER2') from dual
    expected result:
    DBMS_METADATA_DIFF.COMPARE_ALTER('TABLE','TBL_A','TBL_A','U1','U2')
    ALTER TABLE "U1"."TBL_A" ADD ("FIELD_A3" DATE)
      ALTER TABLE "U1"."TBL_A" DROP ("FIELD_A6")
      ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A2" VARCHAR2(50))
      ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A4" NUMBER(5,2) DEFAULT 0)
      ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A4" NULL)
      ALTER TABLE "U1"."TBL_A" MODIFY ("FIELD_A5" NOT NULL ENABLE)

    Thanks for reply rp,
    I got result using "select dbms_metadata_diff.compare_alter('TABLE','TBL_A','TBL_A','USER1','USER2') from dual"

  • Invalid File Name Errors when syncing to Ipod

    Ever since an update last fall I have been getting Invalid file name errors when I try to sync my ipod. A window would pop up saying "Windows could not copy 'SONGNAME' to the iPod 'IPODNAME' because an unkown error occurred (-37)." I would press OK and another window would immediately pop up that would say, "Attempting to copy to the disk 'IPODNAME' failed. the file name is invalid or too long."
    The windows would keep popping up countless times until the sync would just seem to time out and stop.
    The problem songs would have no problem playing in iTunes.
    Prior to the update this did not happen. No new songs were added around this time and nothing was changed to my file directory structure. I was too busy to troubleshoot this problem at the time and hoped that another update would fix it. Well, here I am many months and updates later and still no fix. After fiddling with iTunes and resetting my Ipod multiple times (goodbye saved angry bird games)I have found out that:
    1. By writing down the file name when the error windows pop up I can get a partial list of the problem file names. I could not get a complete list of the problem files because the sync would time out before a full list could be compiled (the list appears to be in the hundreds).
    2. If I changed the name of the file by adding OR deleting one character, remapping the song in itunes, the song would then sync properly.
    3. If I changed the name of the file, remapped the location of the file within iTunes, changed the name of the file BACK to the original name that iTunes supposedly had a problem with, and then remapped the location of the song within iTunes, the song would then sync properly
    4. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, the song would sync properly.
    5. If I moved the song to a different directory without changing the file name, remapped the song within iTunes, moved the file BACK to the original directory, remapped the song again, the song would sync properly.
    6. If I renamed the file and then named it back to the original file name WITHOUT remapping the file location in iTunes, the song would still not sync properly
    7. If I moved the file into a different directory and then back again without remapping the file location, the song would still not sync properly.
    8. Changing or deleting the tags has no effect at all.
    9. File name lengths are already under 200 characters and there are no special characters used.
    So, to sum up, I have found out a way to fix the issue. The problem is, that there are hundreds of songs that appear to be affected and renaming or moving every single one individually and then remapping is extremely inefficient and ignores the cause of the problem. I also did not want to delete the itunes library and then add all of the songs back in because I have many custom playlists that I have spent hours creating and I do not want to delete them.
    Is there a better way to fix the problem? Especially if someone knows the root cause?

    I got a procmon log file and examined it. I have the file and I could also provide you with that or screenshots of it.
    There is nothing unusual about it. I can see entires in which CR has successfully opened the report and has cached in a c:\windows\temp.
    However there is one or two non-successful entries that may be related, especially that examining the stack trace brings us to a call to get_ProductLocaleID():
    - A call to read reg entry HKU\S-1-5-20\Software\Business Objects\Suite 12.0\Crystal Reports\Locale fails with NAME NOT FOUND.
    - immediately after that and from the same process (w3wp.ex) there is a call to open directory "c:\" which is logged as ACCESS DENIED.
    Any subsequent unsuccessful calls seem to be results of exception handling in the debug code.
    Does this point to any setup issues with CR? We always run the redistributable x86 runtime when installing it.

Maybe you are looking for

  • In Preview I rotate an image and save it, but when not when uploaded?

    What's the screwey deal with Preview? I open the image, rotate it, save it...but when I upload it to the internet, it remains in its original position. Whats going on there? Thanks for your help. -ankitae

  • Supplier not visible in the Purchase Order Menu

    Hi All, I have created a Supplier and a Supplier Site from the back end using Supplier Conversion. It was successful and I am able to see the customer in the Supplier menu in Payables and Supplier base menu in the Purchasing, but the supplier is not

  • Why can't I open the programme?

    I recently bought a CD which when I try to open it says I have to buy the adobe reader - which I already have installed on my laptop. I have Windows 7 installed. When I try to open a file from the CD it says I can convert to Microsoft word if I click

  • IPhoto does not import correct pictures

    Using either my Canon camera or IPhone 6 plus, when I try to import new photos to my MacBook Pro, everything in the process works fine, the selected pics appear to be importing correctly and show up on the import screen. But when the import is finish

  • I want my music back on my hard drive.

    I have over 4000 songs collected over the years, mostly copied from CD that I purchased.  I am unable to access them, how do I get them back on my hard drive and off the cloud?