Invalid response received from device

Hello everyone. "iTunes cannot connect to the iPhone because an invalid response was received from the device." I get this message each time I connect my ipod touch to my computer. I have tried reinstalling itunes, uninstalling apple mobile support and all apple related programs and installing them again. However, I would still get the same result. Anyone can help please? Thanks in advance.(My ipod is 3rd gen 32gb 3.1.3)
Message was edited by: leganda

Okay, after the updates I am still having the same problem. I'll try explaining it as detailed as possible, hoping somebody has an answer because this is pretty weird to me.
-I have 5 files, Ringtone1.m4r, Ringtone2.m4r, Ringtone3.m4r, Ringtone4.m4r and Ringtone5.m4r.
-I add them to the "ringtones" section under "Devices"
-ON ITUNES they show up perfectly fine. In order, and if I play them through itunes, all the ringtones are correct, just how they should be.
-I eject iPhone, go to settings > sounds > ringtone, and under custom, what I see is:
Ringtone1
Ringtone1
Ringtone1
Ringtone1
Ringtone1
Why on Earth could this be?

Similar Messages

IPhone and iTunes "invalid response received from device"

Hello,
I'm running a Windows 7 laptop, up to date on patches. I've been running and sync-ing my iPhone successfully for a while now, but it seems since I upgraded to the latest iTunes version (9.1.1), I'm getting the invalid response received error message. I've tried deleting USB ports in Device Manager, resetting the iPhone a couple of times, restarting the laptop a couple of times, uninstalling and reinstalling iTunes, swapping sync cables, and turning off my AV, and it still tells me "invalid response received from device"
Anyone have any ideas that I haven't tried? Thanks.

Did you try to remove and reinstall all itunes components, check this article:
http://support.apple.com/kb/HT1923
Did you try to log in as new user and try to restore?
http://support.apple.com/kb/TS1275

Why does itunes indicate it cannot connect due to invalid response received from device iphone 4s?

How can I fix this?

I had to re-install the OS.. Then all was fine. A genius lead me to this solution.

Iphone will not stay connected "invalid response received from the device."

I have an older iPhone (8gb) and for some reason whenever I plug it into the usb port on my computer it will not stay connected whatsoever. Itunes freaks out, it'll come up for a little bit and then just as soon as it appeared, 'Josh's iPhone' disappears. When I say "won't stay connected" I mean you'll hear the "new usb device" sound over and over again continuously and the iPhone goes crazy too. Like it's connected, disconnecting, connecting, disconnecting, etc.. The error I get during all this madness is "itunes could not connect iPhone because it received an invalid response from the device."
I've used this ( http://support.apple.com/kb/ts1286 ) link to no avail (yet.) I am about to restart my computer right now. If it works after that I'll just simply delete this post. But anyway it's in a usb 2.0, it's plugged directly into the computer, etc etc
Also I'm not sure if this has anything to do with it but I put ringtones on the phone as well, I tried adding about 5 or 6 of them through itunes and it only uploaded two of them, except one of those two appears FOUR TIMES.
Thanks in advance for anyone who can help!

Okay, after the updates I am still having the same problem. I'll try explaining it as detailed as possible, hoping somebody has an answer because this is pretty weird to me.
-I have 5 files, Ringtone1.m4r, Ringtone2.m4r, Ringtone3.m4r, Ringtone4.m4r and Ringtone5.m4r.
-I add them to the "ringtones" section under "Devices"
-ON ITUNES they show up perfectly fine. In order, and if I play them through itunes, all the ringtones are correct, just how they should be.
-I eject iPhone, go to settings > sounds > ringtone, and under custom, what I see is:
Ringtone1
Ringtone1
Ringtone1
Ringtone1
Ringtone1
Why on Earth could this be?

Users are receiving the invalid response email from the Workflow mailer

Hi All,
The problem we are getting in the workflow is that when a user receives a response notification and the user responds to it then the user are receiving the invalid response email.
The error in the email sent back is
Error Message : Ora-01001 invalid cursor
Error stack: &MAIL_STACK_ERROR
I am unable to replicate the issue in test instance so that we can try to find some solution.
Please can some one help me out it is really a high priority for us currently
Thanks,
Varun

This does not happen for all the responses, it happens with some responses but it continues to happen untill we bounce the workflow services.
Regarding the conditions under which this is caused we are not sure of it, if we know under what coonditionns this happens then may be we can try for the solution.
Thanks,
Varun

IPod Touch 'Invalid Response' message from iTunes on Vista

Just install iTunes 8.2 on my new ACER Laptop running Vista Home Edition.
When iPod touch connected to Laptop iTunes throws up the follow error message:
'iTunes could not connect to the iPod device-name because an invalid response was received from the device' I have tried reinstalling iTunes. All the services are running. Vista sees the device and I can browse the content with explorer, but iTunes does not.
Any ideas?

Hi,
Are you seeing any other messages in iTunes?
Try the general tips in this article: http://support.apple.com/kb/HT1852
Also, make sure the iPod touch is directly connected to a high-speed USB2 port on the PC, using the cable that came with it.
-Jason

Capturing the response received from the WCF web service method?

Hi,
I am trying to call a WCF web service method with input parameters in an xml file and then receive the returned output data by the web service as response into an xml file.
So far I am able to call the webservice method successfully and not sure how to capture the response data. I am able to see the response data in the tracked message event using the query expression search at the BizTalk group root.
I may be missing something simple in my orchestration(image at http://social.msdn.microsoft.com/Forums/getfile/535971) ?
Steps in my orchestration are,
1) Receive the xml file with input parameters
2) Send to webservice using WCF-BasicHttp transport type
3) Receive response from web service
4) Send to xml file
Not sure how I can have 2 receive shapes in series there. I have seen few related posts in the forum but could not resolve.
Could someone please correct me?

Hi Rachit,
Thanks for your quick response. My orchestration is similar to the one in that post. In your post at step 7, how you are able to set 'Activate property' of the receive shape to true? as its the 2nd receive shape in series.
I am unable to post any images or links at the moment. My orchestration is posted at this link http://social.msdn.microsoft.com/Forums/getfile/535971
I am able to access the above link using chrome.
Yes, I did use the Request/Response port to communicate with the web service. I
am looking to achieve similar to the one in your post.
Thanks.

Youtube mobile gives me "Invalid Response Received" message for many videos

Is this my ipod? Is it youtube? This is getting extremely frustrating because more than half the videos I try to watch give my this error. This started a few weeks ago, maybe mid July, but it bacame more and more frequent. Nothing has helped me and I use my ipod for youtube alot and would HATE to have to buy another one. Help!

Google was down for a lot of folks over the past day but it should be back up and working now. Make sure you're using your email associated with your YouTube account in X and not your YouTube Username as that's no longer allowed by Google-
http://support.google.com/accounts/bin/answer.py?hl=en&answer=165556

Itunes could not connect to the ipad because an invalid response was received from the device

Hello
I just installed the maximus v extreme motherboard with a ocz vertex 4 ssd with windows 7 x64. Installation was fine and installing drivers went without a hitch. Re-installing the software i use went fine as well.
However, when i went to use iTunes( v10.7) to sync my ipad i got an error message saying:
"Itunes could not connect to the ipad because an invalid response was received from the device"
I then connected my ipod nano to see if it will cause the same error, but it worked fine. So i tried an iphone and the same error I got for my ipad came up.
I tried reinstalling the usb drivers, but the same error came up. I also updated BIOS to the latest version, but the error still came up. I also reinstalled itunes numerous times and still got the error. I reinstalled and updated all drivers as well. Again this did not fix the issue. I also tried to run itunes in vista compatability and xp compatability mode. Again this did not fix the issue.
I have also followed all the steps apple recommends to do on their website with regards to this issue, again it did not fix the issue.
It is a real pain as everything else works like a dream! Is there anything i can do to get itunes to work properly on my pc?
Thank you for your help!
System specs:
asus rampage v extreme motherboard
OCZ vertex 4 SSD
8 Gb DDR3 RAM (1600 mHz)
windows7 x64
Intel i7 3.5Ghz 1155
nvidia GTX295 (x2 running in Sli)

I fixed this problem. Believe the problem is iOS 7 incompatibility with older iTunes Versions on older MacOS systems or platforms.
My iPad 2 would no longer sync with my old PowerPC Mac mini running MacOS. My iPhone 3GS synced fine. IPad2 updated to iOS 7 which doesn't run on my iPhone 3GS. Error message for iPad sync problem was "invalid response received from iPad" out of iTunes. I then applied update iOS 7.1.2 to iPad and error message changed to indicate this version of iTunes not supported, use 11.1.
iPad 2 used to sync prior to iOS 7 installation.
Research on Apple web site shows iOS 7 on iPhones and iPads does not support older MacOS and iTunes versions.
Upgraded with new Mac mini and iTunes 11.1 and MacOS 10.9.2. (put this off as long as I could. )
all good now.

Cannot connect - invalid response !

When I tried to connect my iPod to my PC today, I got a message saying it could not connect beacuse an invalid response was received from the device ? I have not had this problem before.
I tried to connect my iPod on my friend's laptop and it connects fine ? Can you help please ?

Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
iTunes cannot connect to the iPhone because an invalid response received from the device
This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14 above.

Invalid response

Itunes cannot connect to Ipod Touch as a result of above message received

iTunes cannot connect to the iPhone because an invalid response received from the device
This error occurs when there are problems communicating through USB. This may be resolved by following the steps for errors 13 or 14 above. (Now below)
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

When I open firefox the page says "Invalid header recieved from client."

when i open Firefox i get an error message on the screen saying "Invalid header received from client. This happens with Internet explorer too but not with any of my other web browsers. How do i fix this?
== This happened ==
Every time Firefox opened
== A few days ago ==
== User Agent ==
Opera/9.80 (Windows NT 5.1; U; en) Presto/2.2.15 Version/10.10

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": [http://kb.mozillazine.org/Menu_differences Tools > Options] > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: [http://kb.mozillazine.org/Menu_differences Tools > Options] > Privacy > Cookies: "Show Cookies"

No response recieved from domain

I hope you can help.
I have a pc where direct access suddenly is not working anymore. All other company computers work, but not this one
The direct access troubleshooting tool, checks everything as green and says
The configured IPHTTPS URL is https://dahq.domain.com:443.
[09/02/2015 12:05:38]: IPHTTPS has a single site configuration.
[09/02/2015 12:05:38]: IPHTTPS URL endpoint is:
https://dahq.domain.com:443.
[09/02/2015 12:05:39]: Successfully connected to endpoint
https://dahq.domain.com:443. -
But the log also states:
No response received from prd.domaincorp.net.
So what should the steps be to find and solve the error on this poc?. It seems there is a connetion established, but not any response

OK - can see that the iphttps adapter is deativated.
Anyone now how to get this online ?

I have an Ipod Touch 4G, Although I have tried two connection leads to the computer, it comes up with the message ' Itunes could not connect to "Dads Ipod" because an invalid response was received from the device'. Using WinVista Homebasic. Please help?

I have an Ipod Touch 4G, Although I have tried two connection leads to the computer, it comes up with the message ' Itunes could not connect to "Dads Ipod" because an invalid response was received from the device'. I can access the contents of the device via the connection leads using 'My Computer' but not through Itunes as the message always appears!! Using WinVista Homebasic. Is this a known fault with the Ipod4 and VISTA? It works okay on a laptop, however, I would like an expert to take me through the steps to sort out my home desktop computer? Please help? Thanks in advance
I

Try this previous discussion:
https://discussions.apple.com/message/11240674#11240674

Error message "itunes could not connect to the ipad because an invalid response was received from the device".

Hi, I am having problems with itunes and my ipad........
I can use my ipad on my laptop but it will not connect to my main PC, I get the error message:
"itunes could not connect to the ipad because an invalid response was received from the device"
I have done all the Apple support ideas including re-installing itunes twice but no joy.
It used to work a week or so ago and no, I can't think of anything I have done which would have stopped it.
I have run msconfig and disabled everything but still no connection.
Anyone got any ideas?????

iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: iTunes can't contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/ts1814
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
 Cheers, Tom
Did you get an error message number? See this similar post.
https://discussions.apple.com/message/24102115#24102115

Invalid response received from device

Similar Messages

Maybe you are looking for