Invalid serial # message/Unable to reinstall

I don't know what caused this, but I attempted to open Audition last night and it didn't happen. I got the odd prompt that the serial number was invalid. (I bought this program many months ago, and it is installed on this and another computer.)
I then attempted to uninstall it so I could then reinstall it, but have been prevented from doing so for some reason. There are two options in the Install Wizard on the disc, Repair and Remove.
When I attempt to repair, it completes the installation successfully. Then I attempt to open the program and get "The serial number is invalid. Please reinstall Adobe Audition." again. I can't!
When I attempt to remove it, the process gets stopped at the same point each time, prompting the following the message:
"The wizard was interrupted before Adobe Audition 3.0 could be completely installed.
Your system has not been modified. To complete installation at another time, please run setup again."
In the Control Panel's "Uninstall or change a program" section, there are two entries for Adobe Audition 3.0
One has the options to Uninstall, Change or Repair and has no listing under the "Publisher" column.
When attempting to perform any one of these options, NOTHING happens.
The other, with "Adobe Systems Incorporated" has only a "Uninstall/Change" option.
Choosing this sole option results exactly the same way as when attempting to perform the uninstall from the disc.
Ugh. What's happening? How can I resolve this, and what might have caused it?

> I bought it from this site, actually.
Just goes to show you can't trust Adobe an inch. :)
Activation limit - there is a set number of times you can deactivate and reactivate. In case the magic number is confidential I won't mention it, but in typical use - reinstalling after buying a new PC every now and then, or after reinstalling the OS - you'd be unlikely to hit it. However, in a few cases people's individual needs have brought their heads up against the ceiling - and only Adobe can help with that as SteveG confirms.

Similar Messages

Invalid serial number on CS2 reinstall - HELP

I've had to reinstall CS2 on a new PC and am getting an invalid serial number message opening any CS

Refer to this:
Error: Activation Server Unavailable | CS2 or older products, Acrobat 7
Mylenium

Invalid serial number error when reinstalling Acrobat 9

I am retiring an old PC that had Acrobat 9 Standard installed on it. I retrieved the serial number using JellyBean keyfinder. When I try to install Acrobat 9 Standard on the replacement PC and enter the serial number I get an error that the serial number is invalid. As you would expect, Adobe support will not help. So is there anything I can do?
The first four digits of the serial # are: 1016

Just talked with Chat. I will post the transcript. What a waste of time.

Acrobat 8 3D "invalid serial number" message

I'm getting the message, "You have entered an invalid serial number. Please reinstall Adobe Acrobat 8 professional and enter in a valid serial number when asked."
However, the fixes on the Adobe forums for this problem state that it occurs due to Creative Suite 3 (CS3) installations, but I haven't had the CS3 installed on this Windows XP SP2 machine.
I only have standalone InDesign CS3 installed, not the suite. I had the beta standalone IDCS3 installed, and uninstalled it before installing the shipping version.
I had the shipping version of FrameMaker 8 standalone installed. I uninstalled it before installing the beta Technical Communications Suite (TCS). I uninstalled it, restarted Windows XP SP2, then installed the shipping version of TCS, registered it, and authorized it.
With the exception of Acrobat 8 3D, the TCS applications run fine.
I've tried repairing the Acrobat 8 3D component of TCS, and also tried updating to 8.1.1, but no change in the message.
I've only found solutions for the invalid license error that relate to CS3, not TCS.
Before I uninstall TCS, which takes over an hour, and then run the CS3 cleanup script at level 2 - the Adobe knowledgebase recommendation, I'd like to know if this procedure has been successful for anyone who has had the problem, but hadn't installed CS3. I don't want to find out that running the CS3 cleanup script level 2 causes damage because the suite isn't and wasn't installed.
Has anyone done this?
Regards,
Peter Gold
KnowHow ProServices

]Sometimes it feels we're more like the coal-miners canaries... Tweet! Tweet! Cough! Cough! Arrrrrrrrgggggggghhhhhhhh!!! .....<G> Hi, Arnis: There is some perverse pleasure in stumbling into a near-lethal (or at least crazy-making) situation in beta testing, and solving it as well, for the benefit of others in the community of users we all belong to. If only the bug lists would honor these brave souls by naming the bug discovery after them, as well as identifying them with prosaic bug-database numbers<G>. Your solution was very helpful. Here are some notes that may be helpful to others. I'm also reporting this to the beta program. * Removing TCS with Add/Remove Programs didn't fix it. In addition, somehow, although TCS was removed from the application list in A/R, it seemed to be on my system, even after restarting the computer and Windows! I could launch some of the applications, but because it seemed so uncertain, I didn't want to stop at this point and pray nothing would go wrong later. * I ran Microsoft Install Repair Utility, which seemed not to do much. * I rebooted and reinstalled TCS, but had the same problem with Acrobat 3D, so I figured the cleaning wasn't complete. So I uninstalled it, then ran Microsoft Install Repair again, after which... * I copied a bunch of settings files and third-party scripts and plug-ins from Programs/Application Support/Adobe, and my User/Application Support/Adobe folders for the installed ID CS3, and also zipped the whole installation to preserve any information I might need to recover or information about where things need to go in the directory tree, before uninstalling InDesign CS3 and InCopy CS3. Then I ran the Adobe clean-up script level 2, which ran the Microsoft utility. Just to be "extra careful," I ran the Microsoft utility separately; This time it proposed to remove itself! Must be something to do with having nothing left to clean up? Removing it results in the Adobe cleanup script level 2 reporting that the utility isn't installed, needs to be, and quits. Circles within circles - confusing in its helpful way, or helpful in its confusing way. * I ran the Adobe CS3 Clean Up Script level 2, in the preview mode, to see what it planned to do. It proposed to remove InDesign and InCopy CS3 directories, so I removed them before proceeding. * Finally, ran the CS3 clean up script level 2 for real, rebooted, installed TCS, gave the serial number, and was back in business...almost. - Applications launched OK, including Acrobat 8 3D, but, attempting to save a FM document as PDF displayed an error that Distiller couldn't run because Acrobat 8 3D wasn't activated (even though the TCS activation was working for all apps in the suite). While I was doing another slow burn because this was a reprise of one of the problems that sent me on this Odyssey hours and days earlier, Lo! and Behold!, Distiller launched, then Acrobat opened to display the PDF. I'm guessing that Acrobat 8 wasn't *running* at the time I did Save As PDF, so the error was an error in detecting Acrobat. Man! * I was going to leave out the part where I mistakenly entered the beta-test serial number when launching the new TCS installation, which was accepted and worked up to the point that the validator closed the application! The only solution was to uninstall, run MS utility for good luck, pray, and reinstall, which was successful. I provided the correct serial number, and am back in business. This is pilot error, but it reveals a bug that should be fixed - the application should not give a green check mark (valid serial) indicator to a timed-out serial number. The serial should be invalid if it is invalid. Another bug is that the option to activate the suite by checking an application in the final screen should not provide check boxes for the three applications - the check boxes should be radio buttons. Checking multiple applications opens each checked application and prompts for validation. Very confusing!!! Hoping that this helps others stay out of trouble, or that this helps them find solutions. Regards, Peter Gold KnowHow ProServices

Invalid Serial Number when using Customization Wizard to install Acrobat 8

Hello. I'm trying to install Adobe Acrobat 8 Professional using the Customization Wizard to create a transform. The serial number is for the volume license product, and I put this number in the space provided in the Wizard. Whenever I remotely deploy the msi file and the user opens the program, I get the following error: "You have entered an invalid serial number. Please reinstall Adobe Acrobat 8 Professional and enter in a valid serial number when asked." The program then closes. This does not happen when I install from the CD.
Each of the workstations is a Gateway E-4500S running Windows XP SP2. Adobe Acrobat 7 Professional is uninstalled prior to installation of Acrobat 8, and Acrobat 8 exists alongside Adobe Reader 8.1.1. No other Adobe products are installed apart from Flash Player.
The following are the contents of the setup.ini file:
[Startup]
RequireOS=Windows 2000;Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
CmdLine=/sall /rs
[Product]
msi=AcroPro.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows 2000]
PlatformID=2
MajorVersion=5
ServicePackMajor=4
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I've tried editing the setup.ini file to indicate the full path to the mst file, to no avail. Pretty much at the end of my rope right now. Any suggestions? I'll be happy to provide further information.

Chris Benton - 4:40am Jan 29, 08 PST (#2 of 2)
Correct. The CD installation goes without a hitch. I'm using Attachmate WinInstall to try to deploy the software remotely. It worked fine for Adobe Reader 8.1.1, but it's been a bear for Acrobat 8. I'd be okay with a straight CD installation if it didn't involve fifty machines.

Invalid serial number for Lion update. How long do we wait for the code ?

I bought iMac on June 27, 2011 from the Apple Store in Nashua, NH.
I went to the page to enter my serial number and get my code for free LION update.
All I get is invalid serial # message.
I filled out the form and I am still waiting...going on second day ???
MadoneGirl

I know that. I entered my valid serial number but the system that allows for a free update is rejecting
the serial number. You then have to send them a copy of your purchase etc etc.........and they will
email you some kind of code !!!! I am still (along with many others) waiting for my CODE.

I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported. Please choose a different volume for installation." I am f

I am unable to reinstall Photoshop CS6 (I do have the serial number) on my Macbook Pro 10.9.5 (Mavericks os). and am getting the message "Installation on case-sensitive volumes is not supported. Please choose a different volume for installation." I am further told that "Adobe apps cannot be installed on case-sensitive drives, you need to Install the product onto an HFS+ or HFSJ non-case-sensitive drive."
What I don't understand is this: I originally bought and installed Photoshop CS6 back in March 2013, and it worked fine. Yesterday my hard drive had to be replaced and my computer person salvaged as much of what was on it as he could, but now I have to reinstall Photoshop. 1) Why did it work before and it's not working now? 2) Is there anything I can do that does not involve reformatting the hard drive?

It means what it says. The "computer person" formatted it wrongly/ unsuitably. it needs to be formatted again.
Error "Case-sensitive drives not supported" or similar install error | Mac OS
Mylenium

Invalid serial number error message when installing Acrobat 7

I have my original software CD and serial number but understand that I need to use the downloaded program because Adobe no longer supports the activation code required for installing from the disc. I was under the impression that I was to use the original serial number. This is what I used when reinstalling my CS2 Photoshop in the same circumstances.
I downloaded 22001904.exe and ran it but when it gets to the serial number I receive invalid serial number message no matter how I enter the number. I even tried cutting and pasting from my Adobe profile, since I have registered the program w/ Adobe previously along with other Adobe programs.
Can you advise me how to proceed?
Sincerely,
brokripananda

no, use the serial number listed on the page where you downloaded acrobat 7, not your acrobat serial number

I've tried to install a downloaded version of cs5 master collection using the same serial number i used by installing it with the installation dvds and the error message says it's an invalid serial number

as my adobe cs 5 master collections keeps having icc profiles and visualization issues, i've tried to reinstall the hole package. my mac book pro dvd reader is broken, so i downloaded from the adobe website a master collection and tried to install it with the serial number i used in the former installation but a error messages says that it's an invalid serial number.
i've already tried to install from the dvd's in another mac and it worked, with the same serial number, so i'm out of solutions.
any thoughts that may help me?

Si precisases de qué lugar de Adobe o de otro sitio has descargado....
Si indicases el nombre del archivo descargado,....
Respecto a la instalación, repito la lección de ruta es un paso, que puede pasarse por alto, aunque no sé si la instalación convencional reconoce una red entre varios equipos.
No hay ningun mensaje que indique que descargas una versión u otra, tampoco hay o sale ningun mensaje cuando instalas un programa en chino, eso si, al introducir el no. de serie (que no es el adquirido para la versión en chino) te dice que no es válido y punto. No más explicaciones.
Asi que por favor explicanos lo preguntado al rincipio, o vuleve a descargar la versión correcta, en el idioma correcto y desde un lugar oficial de Adobe.
Creo que Adobe te puede facilitar esa descarga a traves de la web "Licensing" con unas claves que te facilitarán si logras ponerte en contacto directo con ellos en tu país, (que tampoco sabemos cúal es). Suerte.

Message "Unable to find nigpib.inf You need to reinstall the NI-488.2 driver

I get the Message "Unable to find nigpib.inf You need to reinstall the NI-488.2 driver software" before the Getting Started Wizard starts. I cannot find this file on the NI provided CD labeled NI-488.2 for windows version 2.2. Help.

First, what GPIB hardware (part number and serial number) are you trying to install, and what is the operating system?
Next, please go to Measurement & Automation Explorer (MAX) Help to generate reports from the System Information and Support Section. Please post the operating system and NI Software info.
Also, please describe the state of your machine before the NI-488.2 installation, and how you progressed through it before reaching the error. For instance, I installed LabVIEW 7.1 and all the default settings of the Device Driver CD, and then installed .... The MAX report and this will help determine how the system got into its state. If you got any errors during the process of installation, please describe in as much detail as you can.
Based o
n the information above, I may have other suggestions about how to resolve this problem, but you may try the following first: Go to Add/Remove Programs and choose to Reinstall the NI-488.2 driver in the National Instruments Software section. Reboot, and try to run the Getting Started Wizard again.

HT1926 Have the same problem as many other users: tried to update iTunes on Windows 7 today; first message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 1

I have the same problem as many other users: updated iTunes on Windows 7 on Jan 26, 2014 and iTunes does not open. First message "unable to locate component- MSVCR80.dll was not found" then "iTunes was not installed correctly. Please reinstall iTunes - Error 7 (Windows error 126)". When will Apple fix this? Don’t feel like uninstalling all Apple software and then re-installing it as suggested, as I am on a terribly slow internet connection while travelling in the DR Congo.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Reinstalling FCP7 in my new Macbook Pro Retina Display. I have my serial numbers back to FCP1. But it tells me that I have an invalid serial number. Why?

Reinstalling FCP in new Macbook Pro Retina from time machine backup. Have all serial numbers back to FCP1 but I am warned I have an invalid serial number. How can that be! I need to install and use this weekend.
Thank you in advance for the help.

How, exactly are you doing this?
When I restored my new computer from the time machine, the software was transfer to the new machine, in the past when double clicking the icon it would come up and ask for the serial numbers. This time was the same with the exception of:
I did not enter an invalid serial number, I tried all the numbers I have. But none of them worked.
I will try to install from discs.
Thanks for your help.

I am unable to reinstall iTunes. I get the message it was not installed correctly. "Please reinstall itunes (Windows error 126)" Also get "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."

I am unable to reinstall itunes. I get the message that it was not installed correctly. I HAVE DONE A SYSTEM RESTORE, I HAVE TRIED TO REINSTALL SEVERAL TIMES ALSO. I get a error message that it's "Windows error 126". Also get "Apple Mobile Device failed to start. Verify that you have sufficient privileges to start system services."
Help!

Click here and follow the instructions.
(98993)

I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to l

I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to launch any of my programs from adobe. I tried to do a trail with a program and I am still getting the same message.

Davinci thank you for the update.
Please utilize any available uninstallers that are located in the Applications/Utilities/Adobe Installers folder. Once all of the available uninstallers have been run you will then want to rerun the CC Cleaner Tool. You can find directions on the use of the CC Cleaner Tool and a download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html. After the CC Cleaner Tool is run then please reinstall the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
The CC Cleaner Tool is designed to be used after running the uninstallers. Without running the uninstallers first then a complete removal may not be possible.

Reinstalling Photoshop CS4 invalid serial number

I have had this software since 2008. It has been running on the same PC for the last five years, now I have finally upgraded the PC, my serial number is invalid and wont activate. Customer service chat says its an incorrect number and could I provide Proof of Purchase (?) Are you kidding me?! They don't show the software was registered -ever- then why was it functioning just fine for the last five years?! To make matters worse, India chat hung up on me -twice!! So I get to thinking, I wonder what our corporate serial numbers say on the Adobe Volume Licensing site -guess what?! They're invalid too!! Coincidence?! I think not! I want an answer as why any serial number I enter from Creative Suite 2 Premium, Technical Suites 2, 3 and 3.5 and a privately owned Photoshop CS4 Extended are ALL invalid according to Adobe?! Is there a translation error from English to Hindi?! Or are your corporate systems so screwed up, you have no clue as to what is a valid serial number and what is not, so you just lead them around and around and around until you just hang up on them or they get so frustrated and angry, they go get a pirated version and generate a key so they never have to speak to you again. I'm certainly not spending another $800 on another Adobe product that may or may not have a valid key. I want the key I legally own validated!! Today!!!

I too have just been victimized by this same scenario, Windows XP machine replaced by a Windows 7 machine, installed CS4 extended to new machine, no serial # acceptance, deactivated XP CS4, reinstalled CS4 on to Win 7 machine, deleted Adobe PCD cache as seen on blogs and chats, activated Win 7 CS4 and it still tells me invalid serial #'s. No help from Adobe! Adobe!, if you care,
Advertise a phone number that allows us to speak to a human being that knows what to do! Don't use delay tactics like people in India that can't make decisions or hope people just give up and buy a new software package!
This is a situation that has me disappointed in Adobe. I always had great performance and stable software until now. And to find out how difficult it is to rectify the problem only because of Adobe's unwillingness to do so is really sad. This is how companies fail, People will spread the word if something is not done to correct and or at least set up a means to help those suffering this debacle.
I for one, am fed up with the hunt and peck search online for an answer and the lack of getting hold of an English speaking person that has a solution that will correct ADOBE'S mistake here. I, like so many I have read about, have a valid copy/ license of CS4 Extended and have only used it on 1 computer until now for many years. We are licensed to use on two computers at a time at different locations, up to 20 reinstalls! This record of valid users and serial numbers is an easy archive by Adobe and should be self explanatory to anyone that researches it. Activated year one on one computer, used for many years on same computer, being activated on a new computer due to Windows XP no longer being supported! How difficult is that? What makes my serial numbers invalid? No one is accusing me of being a thief or Pirate, Adobe just made my serial numbers invalid for no good reason and I have to spend many frustrating hours chasing it down a dead end road! Adobe! See the problem and come forward with a place users can go for a centralized solution! I am a professional that can not afford this interruption to my schedule. A class action law suit is sure to follow if something is not done soon.
Bad press is sure to follow. Your loyal customers will look elsewhere for what they need. I can't believe this is the plan.
If anyone that cares at Adobe is reading this please call me or email me at:<Removed by Moderator> Adobe records have my contact info from my registration of my software both originally and while trying to set up my new computer.
This software is expensive to buy originally. This software may just get a reputation that it is too expensive to purchase if Adobe is going to randomly shut it down by any claim they choose. Abuse of power? yes! A company that does this sort of extortion to it's loyal clients won't be around long. If this is a way to force users to upgrade or pay more money to Adobe for a product they invested in years ago, with the expectation of uninterrupted use until the clients chose to upgrade, than shame on the corporate persons behind it. If this is just a bad string of poor judgement, than fix it fast- make a solution for the damage being done to your loyal customers.
There are many other software solutions out there that do many of the same things for a lot less money than Adobe. Without the professional support of their product in the long run, Adobe may be just be another Greedy corporate monster that WAS!
Prove me right in my being a satisfied long term customer, believing Adobe supports its products long term, and fix this serial number problem. My new computer and the old computer are both without a working CS4 system now. What are you going to do about this major software BUG?
Nick

Invalid serial # message/Unable to reinstall

Similar Messages

Maybe you are looking for