Invalid serial number Acrobat 8.0 Professional

I am encountering an error when I try to install Acrobat Professional 8.0. I keep getting an invalid serial number error. The error originated as a result of attempting to move the license from an old Windows XP machine to a new one with Windows 7. When I attempt to install I get an invalid serial number error, however it is the same serial number which was used to activate on the older machine which has now had the software removed and the license deactivated. I have tried the trouble shooting steps on the adobe help center website.

If it was an upgrade, it is likely the S/N that is being requested is of the qualifying product.

Similar Messages

"Invalid Serial Number" Acrobat Professional 8.0

""Invalid Serial Number: The serial number you entered is not valid."
I installed Acrobat 8 on a previous computer and it worked fine. Computer eventually was retired. Then tried to install it on a new machine... in July. Two series of customer support cases and 8 phone calls to CS later, I still do not have it installed and these cases have been closed by Adobe. In the most recent closed case note from Adobe, the note reads:
"As we have checked the order details, you did not purchasd any download right or media for the product. Kindly contact any reseller near your
area to get the download for this product."
I am staring at my software license certificate right now, along with the software disk. In a previous call, they said they would give me a download link to resolve my outstanding installation issues. Then they closed the case with the above note.
Should it take 6 months to install a piece of software? I think the answer is a resounding "no".

Sorry to hear about all the troubles.
The only suggestion I have left is to uninstall Acrobat then run the Microsoft Installer Cleanup Utility to clear out any remaining bits then try it again. Other than that, there doesn't seem to be much that us fellow users can do to help other than to tell you to upgrade to 9. I work for a state agency as well so I understand that it may not be an option.
RBKoz wrote:
While I could try that, during my time on the phone with Adobe support, they had given me alternative serial numbers to try, and none worked. Local help support tried to remove CS3 from my computer and installing Acrobat, didn't work, so I do not have high hopes.

I cannot install a previously purchased version of acrobat 9 pro downloaded from the site. Returns message at final install steps "invalid serial number." I had copied it and pasted it directly from "My Adobe". What to do?

I cannot install a previously purchased version of acrobat 9 pro downloaded from the site. Returns message at final install steps "invalid serial number." I had copied it and pasted it directly from "My Adobe". What to do?

Hi hgratz,
Considering 'invalid serial number' error for Acrobat 9, I would suggest you to please refer the KB doc link mentioned below:
Error "Invalid serial number" | Acrobat 9 | CS4
Let me know if that helps.
Regards,
Anubha

How can Adobe Acrobat have an invalid serial number, but yet still be able to successfully install?

(with the invalid serial number causing it to not be able to be registered with Adobe Systems, Inc.)
Adobe Systems says the serial number is invalid, but the product successfully installed as normal with no errors.
If the serial number is invalid, shouldn't the installation have terminated and stated that the serial number is invalid?

Hi caseyclaassen,
Acrobat would continue the installation even without serial key but then it will be good only for 30 days.
After the trial poeriod is over, it will prompt you to enter a valid serial number to continue using it.
If you have purchased a valid serial number and still getiing this error, you might want to refer to the KB Doc : http://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html

Invalid serial number adobe 9 standard

I have checked the serial number with Adobe Support
I am currently running windows 8.
I have tried installing it on 2 machines without any success.
After I put in the serial number it said's
invalid serial number
XXXXXX
Invalid Serial number. This is not a valid serial number. Please go back and re-enter your serial number.

Hi Steve,
Please try the troubleshooting steps mentioned in the KB: http://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html
Regards,
Rave

Getting invalid Serial Number during install

Installed Acrobat Pro 9
Used SN as per my account profile
But getting "Invalid Serial Number" error message

Hi victora60929315,
I would recommend you to refer this KB document : Error "Invalid serial number" | Acrobat 9 | CS4
Please let me know if you need any further assistance.
Regards,
Rahul

Acrobat 9 Professional - Invalid Serial Number

All, having issues with installing Acrobat 9 Professional on a Windows 7 Enterprise workstation thats going to be used as a baseline build. Downloaded my software from the my Adobe account from licensing.adobe.com, and my license info as well. The software can be installed on an XP machine just fine. With this Windows 7 build I'm working on, I get the "Invalid Serial Number" error. I believe previously there were older versions of Acrobat on this build but I removed them all and cleaned up the registry as well. Could there be something that I'm missing that Acrobat 9 is seeing to bring this error? I was able to install our copy of Acrobat 8 Pro just fine. Other pieces, this machine is not on the network yet, and my copy of Win7 hasn't been activated yet (because of it not being on the network). What else can I check for? It must be seeing something on the machine for it to be popping up with this error. Somebody told me, if a previously licensed Acrobat copy was installed, it could show this message, but I don't see a trace of any file or in the registry. Help!!!

Just to add. This is a volume license of Acrobat 9 Pro. Not part of a CS bundle or anything like that. No other Adobe software installed except for Flash Player.

Invalid serial number for Acrobat Pro 6.0

I had to reinstall Acrobat Professional 6.0(from a downloaded copy purchased from Adobe.com). The install will not complete. It says "Invalid serial number. Please try again". The only option is to cancel, and then I get the Message: "Adobe Acrobat could not install correctly. Adobe Acrobat was unable to install a necessary component and must quit."
I have verified the number with Adobe Licensing. Adobe Support informs me that they do not support version 6 and the answer is hidden away in the knowledgebase. I have searched the forums and the knowledgebase - to no avail.
Can someone please help or point me to the Doc # (if there is one).
Please do not suggest that I download a pirated version. That is not an option for me.
G4 PowerPC 500MHZ, 1GB SDRAM, 100GB still available on HD. OS X 10.4.11
Can anyone help please?
thanks,
MWG

From the Knowledgebase:
> 5. Troubleshoot serial number problems.
>
> If the Acrobat installer returns the error "Invalid Serial Number"
> after you enter the serial number or during startup, do one or more
> of the following:
>
> -- Delete the serial number from the Serial Number text box, and then
> reenter it exactly as it appears on the back of the Acrobat CD case
> or in the registration guide.
>
> -- Reenter the serial number using different numeric keys. For
> example, use the numeric keys above the alpha characters instead of
> the numeric keys on the keypad.
>
> -- Make sure you typed the number zero (0) correctly, not as the
> letter O.

Invalid Serial Number when using Customization Wizard to install Acrobat 8

Hello. I'm trying to install Adobe Acrobat 8 Professional using the Customization Wizard to create a transform. The serial number is for the volume license product, and I put this number in the space provided in the Wizard. Whenever I remotely deploy the msi file and the user opens the program, I get the following error: "You have entered an invalid serial number. Please reinstall Adobe Acrobat 8 Professional and enter in a valid serial number when asked." The program then closes. This does not happen when I install from the CD.
Each of the workstations is a Gateway E-4500S running Windows XP SP2. Adobe Acrobat 7 Professional is uninstalled prior to installation of Acrobat 8, and Acrobat 8 exists alongside Adobe Reader 8.1.1. No other Adobe products are installed apart from Flash Player.
The following are the contents of the setup.ini file:
[Startup]
RequireOS=Windows 2000;Windows XP
RequireMSI=3.0
RequireIE=6.0.2600.0
CmdLine=/sall /rs
[Product]
msi=AcroPro.msi
Languages=1033;1031;1036
1033=English (United States)
1031=German (Germany)
1036=French (France)
CmdLine=TRANSFORMS="AcroPro.mst"
[Windows 2000]
PlatformID=2
MajorVersion=5
ServicePackMajor=4
[Windows XP]
PlatformID=2
MajorVersion=5
MinorVersion=1
ServicePackMajor=2
[MSI Updater]
Path=WindowsInstaller-KB893803-v2-x86.exe
I've tried editing the setup.ini file to indicate the full path to the mst file, to no avail. Pretty much at the end of my rope right now. Any suggestions? I'll be happy to provide further information.

Chris Benton - 4:40am Jan 29, 08 PST (#2 of 2)
Correct. The CD installation goes without a hitch. I'm using Attachmate WinInstall to try to deploy the software remotely. It worked fine for Adobe Reader 8.1.1, but it's been a bear for Acrobat 8. I'd be okay with a straight CD installation if it didn't involve fifty machines.

Acrobat 8 3D "invalid serial number" message

I'm getting the message, "You have entered an invalid serial number. Please reinstall Adobe Acrobat 8 professional and enter in a valid serial number when asked."
However, the fixes on the Adobe forums for this problem state that it occurs due to Creative Suite 3 (CS3) installations, but I haven't had the CS3 installed on this Windows XP SP2 machine.
I only have standalone InDesign CS3 installed, not the suite. I had the beta standalone IDCS3 installed, and uninstalled it before installing the shipping version.
I had the shipping version of FrameMaker 8 standalone installed. I uninstalled it before installing the beta Technical Communications Suite (TCS). I uninstalled it, restarted Windows XP SP2, then installed the shipping version of TCS, registered it, and authorized it.
With the exception of Acrobat 8 3D, the TCS applications run fine.
I've tried repairing the Acrobat 8 3D component of TCS, and also tried updating to 8.1.1, but no change in the message.
I've only found solutions for the invalid license error that relate to CS3, not TCS.
Before I uninstall TCS, which takes over an hour, and then run the CS3 cleanup script at level 2 - the Adobe knowledgebase recommendation, I'd like to know if this procedure has been successful for anyone who has had the problem, but hadn't installed CS3. I don't want to find out that running the CS3 cleanup script level 2 causes damage because the suite isn't and wasn't installed.
Has anyone done this?
Regards,
Peter Gold
KnowHow ProServices

]Sometimes it feels we're more like the coal-miners canaries... Tweet! Tweet! Cough! Cough! Arrrrrrrrgggggggghhhhhhhh!!! .....<G> Hi, Arnis: There is some perverse pleasure in stumbling into a near-lethal (or at least crazy-making) situation in beta testing, and solving it as well, for the benefit of others in the community of users we all belong to. If only the bug lists would honor these brave souls by naming the bug discovery after them, as well as identifying them with prosaic bug-database numbers<G>. Your solution was very helpful. Here are some notes that may be helpful to others. I'm also reporting this to the beta program. * Removing TCS with Add/Remove Programs didn't fix it. In addition, somehow, although TCS was removed from the application list in A/R, it seemed to be on my system, even after restarting the computer and Windows! I could launch some of the applications, but because it seemed so uncertain, I didn't want to stop at this point and pray nothing would go wrong later. * I ran Microsoft Install Repair Utility, which seemed not to do much. * I rebooted and reinstalled TCS, but had the same problem with Acrobat 3D, so I figured the cleaning wasn't complete. So I uninstalled it, then ran Microsoft Install Repair again, after which... * I copied a bunch of settings files and third-party scripts and plug-ins from Programs/Application Support/Adobe, and my User/Application Support/Adobe folders for the installed ID CS3, and also zipped the whole installation to preserve any information I might need to recover or information about where things need to go in the directory tree, before uninstalling InDesign CS3 and InCopy CS3. Then I ran the Adobe clean-up script level 2, which ran the Microsoft utility. Just to be "extra careful," I ran the Microsoft utility separately; This time it proposed to remove itself! Must be something to do with having nothing left to clean up? Removing it results in the Adobe cleanup script level 2 reporting that the utility isn't installed, needs to be, and quits. Circles within circles - confusing in its helpful way, or helpful in its confusing way. * I ran the Adobe CS3 Clean Up Script level 2, in the preview mode, to see what it planned to do. It proposed to remove InDesign and InCopy CS3 directories, so I removed them before proceeding. * Finally, ran the CS3 clean up script level 2 for real, rebooted, installed TCS, gave the serial number, and was back in business...almost. - Applications launched OK, including Acrobat 8 3D, but, attempting to save a FM document as PDF displayed an error that Distiller couldn't run because Acrobat 8 3D wasn't activated (even though the TCS activation was working for all apps in the suite). While I was doing another slow burn because this was a reprise of one of the problems that sent me on this Odyssey hours and days earlier, Lo! and Behold!, Distiller launched, then Acrobat opened to display the PDF. I'm guessing that Acrobat 8 wasn't *running* at the time I did Save As PDF, so the error was an error in detecting Acrobat. Man! * I was going to leave out the part where I mistakenly entered the beta-test serial number when launching the new TCS installation, which was accepted and worked up to the point that the validator closed the application! The only solution was to uninstall, run MS utility for good luck, pray, and reinstall, which was successful. I provided the correct serial number, and am back in business. This is pilot error, but it reveals a bug that should be fixed - the application should not give a green check mark (valid serial) indicator to a timed-out serial number. The serial should be invalid if it is invalid. Another bug is that the option to activate the suite by checking an application in the final screen should not provide check boxes for the three applications - the check boxes should be radio buttons. Checking multiple applications opens each checked application and prompts for validation. Very confusing!!! Hoping that this helps others stay out of trouble, or that this helps them find solutions. Regards, Peter Gold KnowHow ProServices

Acrobat XI Invalid Serial Number After Failed Install

Hello,
We currently have Adobe Acrobat XI on an enterprise license. I went to install this on 3 of our Windows 7 tablets. Prior to my attempt, I removed Adobe Reader XI which is what I always do. After that I started the installer on the machine and entered the key just fine. All 3 tablets got stuck around 96-97% and failed with an error 1935. I then followed the instructions located here:
https://helpx.adobe.com/acrobat/kb/error-1935-install-acrobat-reader.html
Following a reboot, I tried to install again and now I am receiving the "Invalid Serial Number" error when trying to click "Next" on the installer. It won't even let me choose install trial and go. The next button does nothing when selecting trial. I tried running the offical Adobe Acrobat Cleaner and the Adobe CS6 cleaner (since Acrobat XI is part of CS6 technically). Both programs found items to delete but following a reboot I'm still receiving the same error. I also have other XI enterprise serials available and none of them work. I have a feeling something happened on the tablets that is causing the installer to think it's the wrong version or type for those serial numbers.
Any assistance is greatly appreciated.

Hi Rosa,
I would like to check the issue at your end.
Can you please provide me the contact details at [email protected] so that we can discuss this on call.
Regards,
Rave

Invalid serial number error message when installing Acrobat 7

I have my original software CD and serial number but understand that I need to use the downloaded program because Adobe no longer supports the activation code required for installing from the disc. I was under the impression that I was to use the original serial number. This is what I used when reinstalling my CS2 Photoshop in the same circumstances.
I downloaded 22001904.exe and ran it but when it gets to the serial number I receive invalid serial number message no matter how I enter the number. I even tried cutting and pasting from my Adobe profile, since I have registered the program w/ Adobe previously along with other Adobe programs.
Can you advise me how to proceed?
Sincerely,
brokripananda

no, use the serial number listed on the page where you downloaded acrobat 7, not your acrobat serial number

I have the appropriate Adobe Acrobat 9 Standard software and a valid SN for that software; however, am getting an "Invalid Serial Number" error on installation...please help

I have the appropriate Adobe Acrobat 9 Standard software and a valid SN for that software; however, am getting an "Invalid Serial Number" error on installation...please help

Hi James ,
Make sure you are entering the correct serial number.Try it once again and check.
If it fails please get in touch with Adobe Support.Here is the link for the same.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Regards
Sukrit Dhingra

Adobe Acrobat 7.0 - invalid serial number

I have a new computer so I tried to install Acrobat Pro 7.0 on my new computer but received a message saying it is an invalid serial number. I got the serial number from my products under my adobe id. Please help! I need my adobe acrobat pro on my new computer!!

You need to get a special version along with a special serial number. See the following...
CS2: Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html

Invalid Serial number for Adobe Acrobat 7.0 Pro downloaded from your site

I understand that you no longer will activate Acrobat 7.0 Pro...so I went to adobe.com\go\activation and downloaned the file for Acrobat 7.0 pro...which is file 22020134.exe and noted the serial number provided which is <removed by mod - kglad>..however I am getting the Invalid serial number error whether i try to use the serial number you provided or the serial number on the cd.
Can you pleaes provide a valid serial number?

that is the correct serial number. recheck your downloaded file and recheck the number you used.

Invalid serial number Acrobat 8.0 Professional

Similar Messages

Maybe you are looking for