Invalid Server Name - Nokia C6-01 Error
Hi All,
I just purchased a Nokia C6-01 phone. I am expressing difficulty with browsing. Anytime I try visiting a page, I get INVALID SERVER NAME. Some time the browsing only works when I do a google search and I click the search result sometime it doesnt, it gives the same error: Invalid Server Name. I have done a search on it on the web, no body seem to have solution, Can some one help me.
Regards,
Handyman123
hi
it is not a big problem .
we are using the router that we matched the IP adress .192.168.1.1 and u will be inter the system setting . and for lan setting also we use the IP i mean in TCPIP for example 192.168.1.2 in laptop or PC now you have to give ur mobile also the IP to be connect with router and laptop .
do thies steps: first connect to ur router by wifi scaning . after u connect , go to menu
1- setting
2- connectivity
3-setting
4-destination
5-add access point
after u added access pint ( is the same name of the wich u gived in router setting) .and use it for internet .
6- open by clicking on the new access piont
7-option
8-advanced setting
9-ipv4 setting and give IP address must be difrent with pc or laptops IP - 192.168.1.3 or ...
now you can connect and open pages . i solve it and working 100% .
i hope you do too .
kallagot
Similar Messages
-
E72 connected to wifi but 'invalid server name' pr...
I had no problems connecting to the wifi at the mobile phone shop but have the 'invalid server name' problem at home. however, my husband who is using Nokia too has no problems using the home wifi on his phone.
it shows that the phone is connected to the wifi but when i try to browse, it tells me that the server name is invalid. I have had phone conversations with people from Digi, Nokia and the phone company all day long and this continues to be a problemDelete all browser privacy data.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
Invalid column name while loading member error in EIS
we have changed the sort_order_01 column as LEVEL01_SORT_ORDER in SQL server view, but it is not reflecting in EIS during member load, however we added manually LEVEL01_SORT_ORDER in table properties of dimension member, but it is not reflecting in EIS, it is poping the error as:Invalid column name "sort_order_01".
hi techies kindly throw some light on thiswe have done the same, even then it is not reflecting in OLAP model and Meta Outline.Problem is whether in the sql server or in the EIS ..
Please suggest & help me out.
sunil -
Changed server name, reconfiged emca, still getting java errors on console
I installed 10gr2 with local database control only, and had all working fine. I then moved the server into production after testing and changed the server name. Of course this changed all the settings for dbconsole so I ran the emca config again from some info I got off of this forum a week or so ago. I can't seem to find that thread any more, and I need to get this working. I could not find any more references to the old server name, but the java error is still showing one. I can bring up the login page and login, but then it wont display any info.
I've been searching to see what I need to do to totally re-install the local database control component but can't seem to find anything. I am also going to eventually have grid control running on another machine as well, but I imagine that I still have to have all the proper things in place on this server before I can connect either thru grid control or locally in any case.REPOSITORY_URL=http://winms-wwscale.millsite.net:5500/em/upload/
I searched every file in the <server url> directory and changed any references to the old servername to the new one. The only ones that showed up were for isqlplus items.
I am pretty sure I have run the "emca dbcontrol db -repos recreate" command, but perhaps I'll do it again. I also have a thread going on this in metalink and one suggestion is to do the following:
SHUTDOWN IMMEDIATE;
STARTUP RESTRICT;
A. Drop the repository manually using following procedure.
Stop the DB Console if not already stoped: $ORACLE_HOME/bin/emctl stop dbconsole
Log on in sqlplus as sys user and run the following commands:
a. drop user sysman cascade;
b. drop role MGMT_USER;
c. drop user MGMT_VIEW cascade;
d. drop public synonym MGMT_TARGET_BLACKOUTS;
e. drop public synonym SETEMVIEWUSERCONTEXT;
(Note If any of the above statement failed and saying object doesn't exist just skip that
statement)
B. Drop the DB Control configuration files.
Remove the following directories:
$rm -rf $ORACLE_HOME/<HOSTNAME_SID>
$rm -rf $ORACLE_HOME/oc4j/j2ee/OC4J_DBConsole_<HOSTNAME_SID>
On Windows systems just delete the folders above from the Explorer.
You have to replace the values in the <> with the correct values from your environment .
The shutdown and startup restrict seems a tad severe to me, I'm thinking thats if others may be trying to access the database control page while you are doing all of this. -
Dimension processing failure - Invalid Column Name
Hello
I have copied our Account Dimension from Prod to Dev because we are testing 7.5MS.
I have Maintained Properties and modified dimension successfully.
But when I process i get the foll error :
- OLE DB error: OLE DB or ODBC error: Invalid column name 'ID13'.; 42S22; Invalid column name 'SEQ13'.; 42S22; Invalid column name 'YE_REF13'.; 42S22; Invalid column name 'SOLVEORDER13'.; 42S22; Invalid column name INPUT_SCHEDULE13'.; 42S22; Invalid column name 'ICMATCH13'.; 42S22; Invalid column name 'IC_SMRY13'.; 42S22; Invalid column name 'FORMULA13'.; 42S22; Invalid column name 'DRILLKEY13'.; 42S22; Invalid column name 'ALTECHUNUSED13'.; 42S22; Invalid column name 'ALTECHUNUSED12'.; 42S22; Invalid column name 'ALTECHUNUSED11'.; 42S22; Invalid column name 'ALTECHUNUSED10'.; 42S22; Invalid column name 'ALTECHUNUSED9'.; 42S22; Invalid column name 'ALTECHUNUSED8'.; 42S22; Invalid column name 'ALTECHUNUSED7'.; 42S22; Invalid column name 'ALTECHUNUSED6'.; 42S22; Invalid column name 'ALTECHUNUSED5'.; 42S22;
Invalid column name 'ALTECHUNUSED4'.; 42S22; Invalid column name 'ALTECHUNUSED3'.; 42S22; Invalid column name 'ALTECHUNUSED2'.; 42S22;
Errors in the OLAP storage engine: An error occurred while the dimension, with the ID of 'AppSet', Name of 'Account' was being processed.
Server: The operation has been cancelled.
When I changed everything thing back to the old dimension it all works fine again.
Any help please?
Rgds
Perven
Edited by: Pervendren Naidoo on Jul 29, 2010 11:18 AM
Edited by: Pervendren Naidoo on Jul 29, 2010 11:18 AMIt seems to be something wrong into your dimension.
Check the member 42S22 especially regarding hiereachy.
Regards
Sorin Radulescu -
Okay, I'm by no means a cold fusion expert. But I have been teaching myself over the last year since our website was built off of Cold Fusion. So I need help because I am trying to build a site where people can enter in their e-mail address, and name (first and last) for a sweepstakes that we have on our catalog.
I have create a table called "Sweepstakes" so on my MS SQL 2005 Web Box there is a table under the database called "dbo.sweepstakes". I have replicated basically everything that a original database that was already created to capture user's email address for catalog request and what have you. The original database to capture user's request catalogs from us is called "dbo.InfoRequest" (just a FYI) and this was the database I basically replicated in a way.
So after saying all this, I continue to receive this error message and I can not figure out why. So here is the error message that I am getting.
This is the error when trying to load the database from the "webview" basically. We have an Admin Console to the website and in their, there is a section to list the contents of a specific database. So if you requested a catalog, you put in your name, email address, etc on to the website and when you hit submit on the website it insert it into the database called "dbo.InfoRequest". So when the Spring comes and I want to get a list of people that have request a catalog, I go to our website's admin console and inside there, there is a "List Catalog Request". When you click on it, it loads a file called "ListCatalogRequest.cfm" and it displays the "dbo.InfoRequest" database on the screen in a table format basically. So I am trying to replicate that for this sweepstakes we are having on our website / catalog but without using the "dbo.InfoRequest" database. Since we are doing a drawing, I'd rather it be in it's own database for viewing a drawing. So I have copied the "ListCatalogRequest.cfm" file and renamed it to "ListSweepstakesEntrys.cfm" and changed a couple of things in the file to point to the "dbo.Sweepstakes" that I created this morning and here are the results when you bring up the "ListSweepstakesEntrys.cfm" file.
If you need the results and / or code from either "ListSweepstakesEntrys.cfm" or "IISAdminSecurity.cfm" please let me know.
THANK YOU FOR ALL YOUR HELP IN ADVANCE!
--- ListSweepstakesEntrys.cfm ---
Error Executing Database Query.
[Macromedia][SQLServer JDBC Driver][SQLServer]Invalid column name 'Sweepstakes'.
The error occurred in E:\data\webs\m_k_tweb2007\admin\iiAdminSecurity.CFM: line 298
Called from E:\data\webs\m_k_tweb2007\admin\ListSweepstakesEntrys.cfm: line 2
Called from E:\data\webs\m_k_tweb2007\admin\iiAdminSecurity.CFM: line 298
Called from E:\data\webs\m_k_tweb2007\admin\ListSweepstakesEntrys.cfm: line 2
296 : WHERE
297 : Username = '#Client.Username#'
298 : AND Password = '#Client.Password#'
299 : AND Active = 'Y'
300 : AND UserType = 'A'
SQL SELECT [Sweepstakes] AS TableAccessLevel, MinimumSecurity, IDNumber FROM AdminUsers WHERE Username = 'username' AND Password = 'password' AND Active = 'Y' AND UserType = 'A'
DATASOURCE M_k_tWeb2007
VENDORERRORCODE 207
SQLSTATE 42S22
Resources:
* Check the ColdFusion documentation to verify that you are using the correct syntax.
* Search the Knowledge Base to find a solution to your problem.
Browser Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6 (.NET CLR 3.5.30729)
Remote Address 24.XX.XX.XX
Referrer http://m_k_t.com/admin/admin.cfm
Date/Time 24-Feb-10 07:32 AM
Stack Trace
at cfiiAdminSecurity2eCFM1992009626.runPage(E:\data\webs\m_k_tweb2007\admin\iiAdminSecurity. CFM:298) at cfListSweepstakesEntrys2ecfm1853454474.runPage(E:\data\webs\m_k_tweb2007\admin\ListSweeps takesEntrys.cfm:2) at cfiiAdminSecurity2eCFM1992009626.runPage(E:\data\webs\m_k_tweb2007\admin\iiAdminSecurity. CFM:298) at cfListSweepstakesEntrys2ecfm1853454474.runPage(E:\data\webs\m_k_tweb2007\admin\ListSweeps takesEntrys.cfm:2)
java.sql.SQLException: [Macromedia][SQLServer JDBC Driver][SQLServer]Invalid column name 'Sweepstakes'.
at macromedia.jdbc.base.BaseExceptions.createException(Unknown Source)
at macromedia.jdbc.base.BaseExceptions.getException(Unknown Source)
at macromedia.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
at macromedia.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
at macromedia.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
at macromedia.jdbc.sqlserver.SQLServerImplStatement.getNextResultType(Unknown Source)
at macromedia.jdbc.base.BaseStatement.commonTransitionToState(Unknown Source)
at macromedia.jdbc.base.BaseStatement.postImplExecute(Unknown Source)
at macromedia.jdbc.base.BaseStatement.commonExecute(Unknown Source)
at macromedia.jdbc.base.BaseStatement.executeInternal(Unknown Source)
at macromedia.jdbc.base.BaseStatement.execute(Unknown Source)
at coldfusion.server.j2ee.sql.JRunStatement.execute(JRunStatement.java:212)
at coldfusion.sql.Executive.executeQuery(Executive.java:753)
at coldfusion.sql.Executive.executeQuery(Executive.java:675)
at coldfusion.sql.Executive.executeQuery(Executive.java:636)
at coldfusion.sql.SqlImpl.execute(SqlImpl.java:236)
at coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:500)
at cfiiAdminSecurity2eCFM1992009626.runPage(E:\data\webs\m_k_tweb2007\admin\iiAdminSecurity. CFM:298)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at coldfusion.filter.CFVariablesScopeFilter.invoke(CFVariablesScopeFilter.java:63)
at coldfusion.tagext.lang.ModuleTag.doStartTag(ModuleTag.java:255)
at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:1925)
at cfListSweepstakesEntrys2ecfm1853454474.runPage(E:\data\webs\m_k_tweb2007\admin\ListSweeps takesEntrys.cfm:2)
at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152)
at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349)
at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:225)
at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:86)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115)
at coldfusion.CfmServlet.service(CfmServlet.java:107)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)OK, this is more a SQL question than a CF question, but not to worry.
You say this:
I have create a table called "Sweepstakes"
My emphasis.
But your query is this:
SELECT [Sweepstakes] AS TableAccessLevel, MinimumSecurity, IDNumber FROM AdminUsers WHERE Username = 'username' AND Password = 'password' AND Active = 'Y' AND UserType = 'A'
The question I pose to you is: does a SELECT statement in SQL take the name of a table?
Hint: no.
Best you revise your SQL docs, I think.
Adam
PS: it's "ColdFusion", not "Cold Fusion". Not that it really matters :-) -
Max Length of Essbase Server Name?
Hi - we're installing 9.3.1 and are coming across a problem related to replicated partitions that I'm hoping someone else has also encountered and resolved.
Since partitions aren't covered by the Migration Wizard, they were migrated from our 7X environment by exporting them from 7X as xml files, doing a "find/replace" within them to change the old server name to the new server name, and then reimporting them in the System 9 environment. Short names were used for this. This was done for them all (we have one or two dozen), and everything worked well. We kicked off a few and all was good.
Then we went back a few days later and all of the partitions had gone to Orphan status. Looking at them just in the tree view in EAS, they were all saying that they were using the fully-qualified server name (which, in our environment, is 31 characters) instead of what we had originally created them under, which was much shorter: xxx-xxxx-xx = 11 characters. When you open one, it even still references the shorter names in the connection tab. However, whenever you execute one, it goes against the fully qualified name, which appears to be just 1 character too many, because every kickoff of replication fails saying that its an invalid server name, giving the full name ending with ".co" instead of ".com". We had a problem like this in 7X, but we could always get around it because the process would work if we just created and executed using the shorter name (also, we could use App Manager to kick them off, which I'm reluctant to do against System 9). Thus far, we've had no such luck in 9.3.1 - even new partitions created under the shorter name automatically orphan and use the longer name.
While changing the server name is an option, I'm hoping someone knows of some way to get Essbase to read a server name longer than 30 chars, or to force Essbase to stop using the fully qualified name and just use the shorter one.
Thanks much. Sorry for the long blow-by-blow.
-RobOne way around this would be to use the IP address instead of the server name. I ran into a similar problem and that was the answer I was given by Oracle. (see my blog http://glennschwartzbergs-essbase-blog.blogspot.com/2008/08/partitions.html)
-
HI Every one.
This is prasad working on sap xmii with sql server 2005.I am having problems to add or update the table using query templates.When i am updating a table with data I am getting the sql error as server name cannot be blank.It is working fine in Sap Xmii11.5 but in Sap Xmii 12.0 iam getting this error.Can any help on this issue.
Thanks,
Prasad.Server name cannot be blank errors mean that you are either referencing a display template or a query template that does not have a server property saved in it such as:
/XMII/Illuminator?QueryTemplate=Defaults/TagQuery
/XMII/Illuminator?QueryTemplate=Defaults/iChart
Double check the path to your template and confirm that it's a valid query template including a Data Server. -
SP 2013 Server + Dec 2013 CU. Upgrading from SharePoint 2010.
We have a web application that is distributed over 7-8 content databases from SharePoint 2010. All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.
while running Test-SPContentDatabase or Mount-SPContentDatabase.
EventViewer has the following reporting 5586 event Id:
Unknown SQL Exception 208 occurred. Additional error information from SQL Server is included below.Invalid object name 'Webs'.
After searching a bit, these links do not help:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/fd020a41-51e6-4a89-9d16-38bff9201241/invalid-object-name-webs?forum=sharepointadmin
we are trying PowerShell only.
http://blog.thefullcircle.com/2013/06/mount-spcontentdatabase-and-test-spcontentdatabase-fail-with-either-invalid-object-name-sites-or-webs/
In our case, these are content databases. This is validated from Central Admin.
http://sharepointjotter.blogspot.com/2012/08/sharepoint-2010-exception-invalid.html
Our's is SharePoint 2013
http://zimmergren.net/technical/findbestcontentdatabaseforsitecreation-problem-after-upgrading-to-sharepoint-2013-solution
Does not seem like the same exact problem.
Any additional input?
Thanks, Soumya | MCITP, SharePoint 2010Hi,
“All but one database are upgradable. However, one database gives:
Invalid object name 'Webs'.”
Did the sentence you mean only one database not upgrade to SharePoint 2013 and given the error?
One or more of the following might be the cause:
Insufficient SQL Server database permissions
SQL Server database is full
Incorrect MDAC version
SQL Server database not found
Incorrect version of SQL Server
SQL Server collation is not supported
Database is read-only
To resolve the issue, you can refer to the following article which contains the causes and resolutions.
http://technet.microsoft.com/en-us/library/ee513056(v=office.14).aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support -
I am getting following error in each module of SAP B1 9.0 and hence unable to use SAP b'coz I can't add or change any document b'coz of this error.
Error : [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'UNKNOW ERROR'. (CINF)
please help me to resolve this issue.I am getting following error in each module of SAP B1 9.0 and hence unable to use SAP b'coz I can't add or change any document b'coz of this error.
Error : [Microsoft][SQL Server Native Client 10.0][SQL Server]Invalid object name 'UNKNOW ERROR'. (CINF)
please help me to resolve this issue. -
I am new to SSRS and I am trying to migrate reports from 2008 to 2012. As I have so many reports to migrate, I simply got the back up of ReportServer,
ReportServerTempDB, and Encryption Key and restored them to test environment. I made necessary configuration from RS configuration tool. I am able to see the reports now when I browse //hostname/reports. But when I open any particular report I am getting some
error.
· An error has occurred during report processing.
(rsProcessingAborted)
Query execution failed for dataset 'dataSet'.
(rsErrorExecutingCommand
Semantic query execution failed. Invalid object name
'RPT. ******'. (rsSemanticQueryEngineError)
****** - I am assuming this is a custom data class.
Does anyone have insight on this? or any better way that I can migrate the reports to new server with less efforts.
I don’t have the reports solution file to deploy the reports, so I have followed backup and restore process.Hi Kishore237,
According to your description, you migrated some reports from Reporting Services (SSRS) 2008 to 2012. Now you get error when accessing the reports on SSRS 2012. Right?
In this scenario, did you modify the report data source in database after migration? You can try to open the report in Report Builder or Report designer and check the report dataset. If you can preview the report in Report builder or Report designer,
please try to redeploy the report to Report Server. If it is still not working, please try to restore the database from backup. And for migrating reports, please follow the "Content-Only Migration" in the link below:
http://msdn.microsoft.com/en-us/library/ms143724(v=sql.110).aspx
If you have any question, please feel free to ask.
Best Regards,
Simon Hou -
The name of the security certificate is invalid or does not match the name of the site error?
I am looking for some help folks. We are in a Outlook 2007/Exchange2010/Windows2008R2 environment.
When users open Outlook off the network, and occasionally on the network, they get the error
The name of the security certificate is invalid or does not match the name of the site error
The CAS hostname is HRECAS.XXX.ORG. The URL that is listed on the SSL certificate (issued by VeriSign) is WEB.XXX.ORG. WEB.XXX.ORG is what users use to get to OWA and such.
When I use testexchangeconnectivity.com, under certificate name validation I see an error that reads:
Host name autodiscover.xxx.org doesn't match any name found on the server certificate CN=web.xxx.org.
Does this mean somehow we have to add autodiscover.xxx.org on the certificate?
I tried to add AutoDiscoverExternalUri using
http://support.microsoft.com/?kbid=940726 &
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/2d0c0f5f-e4ec-4f33-a37d-b94fd7a2319f on the CAS server.
Set-ClientAccessServer -identity HRECAS -AutodiscoverServiceExternalUri
https://autodiscover.xxx.org/Autodiscover/Autodiscover.xml
I get an error that says
"a positional parameter cannot be found that accepts argument '-AutoDiscoverExternalUri'.
Can someone point to me what I am doing wrong with the command and whether I should be concerning myself with adding that line? By the way the
InternalUrl information is already configured on the system. Also should I edit the certificate to add autodiscover.xxx.org?
Thank in advance for your support.
TD
TDHi Tapera,
Thanks for the question.
SRV record is a good idea. You can set the SRV to
https://web.abc.com/autodiscover/autodiscover.xml but you must make sure the
url can be resolved from External clients.
In addition, there is still a issue. It is hard coded that Outlook will find the autodiscover by the orders below:
1. Access autodiscover via SCP in AD.
https://web.abc.com/autodiscover/autodiscover.xml
2. If SCP access fails, it will try:
https://abc.com/autodiscover/autodiscover.xml
3. Then
https://autodiscover.abc.com/autodiscover/autodiscover.xml
4. Local XML file
5. SRV record
As you can see, Outlook will try SRV record at last. Therefore, it will still try to access
https://autodiscover.abc.com/autodiscover/autodiscover.xml each time you run Outlook. Then the certificate warning will still persists.
I have a workaround solution. You can do a local policy to disable the autodiscover to access the
https://autodiscover.abc.ocom/autodiscover/autodiscover.xml by:
1.
On the Outlook client machine, open regedit and add the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\Autodiscover
"ExcludeHttpsAutodiscoverDomain"
"ExcludeHttpsRootDomain"
2.
Then set the value to “1” on the above two keys.
Thanks,
Simon -
Invalid subreport name Error code:-2147483086
The setup used in this particular environment is to run reports via Crystal reports server 2008. We call the servers via the rassdk_java_dg_12_en and the setup works just fine BUT in one particular case.
The report that fails have a main report with a datasource to SQL. The report does have about 20 - 25 subreports mostly based on the same datasource. There are however 6 subreports that uses ttx files as datasources.
The report works fine when there is no data for the ttx subreports, but whenever a "change datasource" is tried to the ttx subreports the error "Invalid subreport name Error code:-2147483086" pops up.
We have done noumerous tests on the pojo approach in other reports so the technic and code works just fine - it most be some special case in the report.
Before we start to try to rebuild the report we will give you a chance to help us out. The report sucker is big and complex so a rebuild is not wanted...
Here is the particular code involved
private static void passPOJO(ReportClientDocument clientDoc,
ReportPojoHolder pojoHolder, String reportName)
throws ReportSDKException,ClassNotFoundException {
//Its a pojo data source, but it's nothing in it
if (pojoHolder.getPojos().size() == 0) {
return;
String reportTable = pojoHolder.getTableName();
Object pojo = pojoHolder.getPojos().iterator().next();
POJOResultSetFactory factory = new POJOResultSetFactory(pojo.getClass());
POJOResultSet resultSet = (POJOResultSet)factory.createResultSet(pojoHolder.getPojos());
if(reportName == null || reportName.equals("")) {
clientDoc.getDatabaseController().setDataSource(resultSet, reportTable, reportTable);
else {
System.err.println("Setting data in " + reportName );
//Here comes the error
clientDoc.getSubreportController().getSubreport(reportName).
getDatabaseController().setDataSource(resultSet, reportTable, reportTable);
Here is the stacktrace:
table: srptMainCustomerList;1, subrapport: AddressField
table: srptusrinf;1, subrapport: AdvisorName
table: srptusrinf;1, pojo: Beta
table: srptusrinf;1, pojo: JensensAlpha
table: srptusrinf;1, pojo: PerformanceChart
Setting data in PerformanceChart
2009-02-06 09:05:31,720 ERROR (CrystalReportServlet:doGet()) - [Username=Patrik Andrén, UserID=n249060, CustId=005563741684, Cstid=37385] - (Creation of report: customer_report.rpt failed on: [ReportAppServer: CCA1CS0569. Datasource: cca1cd0046qa1|omega] com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException:
Fel i filen customer_report {CDCDCEC2-050C-4405-865C-6031D4BFF2DE}.rpt:
Ogiltigt underrapportnamn.---- Error code:-2147483086 Error code name:failed, ) - [applicationId=omega, omegaUserId=omega.userid, credentials=IT, groupName=IT, sessionId=yLkhJLtYpLlDQ5Jf5S2GkzhPfSZJBg2zZkT4LfQ0L1bJg2v20pz2!-2033571304!1233906968432, requestId=06968853:167:000], exception-stack=
com.nordea.omega.report.exceptions.ReportGenerationFailedException: Creation of report: customer_report.rpt failed on: [ReportAppServer: CCA1CS0569. Datasource: cca1cd0046qa1|omega] com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException:
Fel i filen customer_report {CDCDCEC2-050C-4405-865C-6031D4BFF2DE}.rpt:
Ogiltigt underrapportnamn.---- Error code:-2147483086 Error code name:failed,
at com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException.throwReportSDKServerException(Unknown Source)
at com.crystaldecisions.proxy.remoteagent.s.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.if(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.bl.do(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.do(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.verifyDatabase(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.bl.byte(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.ao.onDataSourceChanged(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.a(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.DatabaseController.setDataSource(Unknown Source)
at com.nordea.crystalreports.ReportHelper.passPOJO(ReportHelper.java:814)
at com.nordea.crystalreports.ReportHelper.changeDataSource(ReportHelper.java:124)
at com.nordea.crystalreports.ReportGenerator.generate(ReportGenerator.java:115)
at com.nordea.crystalreports.ReportGenerator.generate(ReportGenerator.java:62)
at com.nordea.omega.report.servlet.CrystalReportServlet.doGet(CrystalReportServlet.java:116)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiI have been able to wrestle this down after a lot of frustrating work. The error had nothing to do with pojos at all. The error was simple a store procedure that did not reply nothing.
In the preparation of the subreport that did consist of the pojo data source. The report(server?) did send a "pre call" to the store procedure with NULL as parameters. The reply was unfortunately an "empty" reply. When we changed the reply to an empty result set it went pass the data sources.
The error message given on this was "Invalid subreport name"! Not very helpful at all.
I have used this new version for about 3 weeks now in a "proof of concept" work controlling if we would be able to upgrade from crystal 9/Harmoni to Crystal 2008/Crystal Report Server 2008. The answer will be yes. It will work. And with a minimum of report changes which is very nice.
What have struck me the most during this work is a few proposals to improvements.
1. Put the versions on jars and sdk's so it's obvious what's used. I spent a few days with an old version of a sdk believing that it was a newer than I already had. It should not be neccessary to go through a manifest file inside a jar in order to find out what the version is. Put it on the file names!
2. Give proper error messages back when something goes wrong. If a parameter value is missing. Send back the parameter that's missed/misses a value for Gods sake. The programmer catching the error most know what's missed hence the message. Would save the user's of the API very much time.
I spent about 5 - 10 days trying to find out what was wrong with my sub report name (This thread). It had nothing to do with the subreport name. It had to do with missing data from a called store procedure!
3. The documentation can be a bit tricky to find. I saw that you have given away a eclipse plugin in order to gather the documentation inside the IDE. That's a good approach.
If the error messages will be enhanced and more accurate it's a pretty handy api to work with. And the handling of unmanaged reports is a wet dream compared to usage of the Harmoni API. That's a real nightmare. The server seems to be very stable and just runs.
I like this forum, fast replies when one is stuck is extremely helpful!
/Patrik -
After 8.8 Upgrade Invalid Column Name error on UDF in Sales Order
I have upgraded a dtaabase from 2005A to 8.8 SP00 PL15.
I encountered a UDF/UDT warning (Note 1360832) in the Pre-Upgrade CHeck but proceeded in any case.
After the upgrade as soon as I enter the BP in a Sales Order, I get the following error.
[Microsoft] [SQL Server Native Client 10.0] [SQL Server] [Invalid Column Name U_CampPB1.2)
[Microsoft] [SQL Server Native Client 10.0] [SQL Server] Statement 'Withholding Tax' (OWHT) could not be prepared.
This UDF was one of many reported in the Upgrade Wizard Log File as having an incorrect Type.
" Type is different; Should be A, Is M".
There are hundreds of instances of this message in the log.
I don't know whether the error is related to the Type is different warning.
I don't get the error when I add an AR Invoice.
In addition I cannot find any documentation on the different UDF Type codes.Hi,
should you have any errors before or after upgrade, log a message to a support. That's the best solution.
JimM -
Having an interesting problem with a site I'm fixing. I'm
sure I'm looking past the obvious, so maybe some of you can help:
ASP Pages display results from recordset based on a session
variable (memberID) that is created during user login.
Recordset looks like this:
<%
Dim rs__MMColParam
rs__MMColParam = "%"
If (Session("memberID") <> "") Then
rs__MMColParam = Session("memberID")
End If
%>
<%
set rs = Server.CreateObject("ADODB.Recordset")
rs.ActiveConnection = MM_cnConnection_STRING
rs.Source = "SELECT id, adminusername, anotherone1,
anotherone2, anotherone3 FROM dbo.basic1 WHERE adminusername = '" +
Replace(rs__MMColParam, "'", "''") + "'"
rs.CursorType = 0
rs.CursorLocation = 2
rs.LockType = 3
rs.Open()
rs_numRows = 0
%>
Seems correct to me, unles I'm overlooking something obvious.
Unfortunately I keep getting the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e14'
[Microsoft][ODBC SQL Server Driver][SQL Server]Invalid column
name 'SESSIONVAR'.
(Note: in this error above, SESSIONVAR is the name of the
session variable memberID)
Strange thing is, as long as the session variable is a #,
everything works. If it's a word, it won't work. So it appears the
session variables are being defined and passed to the next page.
As for the database, it's a SQL Database
column 'adminusername' is a NVARCHAR with a 4000 char limit
Thanks in advance for any help.Are you sure the query is the same? It looks like the one you posted has a syntax error
SELECT e.emp_id, e.dep_id
FROM emp e, loc ct, dep dt
WHERE[b] c.dep_id[/b] IN (SELECT dt.dep_idYou've aliased the LOC table to CT in the FROM clause, but you're using the alias C in the WHERE clause. You use the correct alias CT in the query in your IN clause.
Justin
Maybe you are looking for
-
HU_CREATE_GOODS_MOVEMENT refresh problem
I am using FM HU_CREATE_GOODS_MOVEMENT to make a 311 movement. When I run it twice, the first is correct but in the second appears a DUMP. I have solved it creating a simple report ZHU_CREATE_GOODS_MOVEMENT which just launch the FM. Then, in my progr
-
Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?
Does anybody knows how to install Windows 7 from a USB drive on 2010 MacBook Air running Lion?
-
CD burning with disk utility - format and size for 800 MB - 90 minutes CD
Hi Support, I'm trying to burn a CD with 800 MB (90 minutes) using disk utility. When I create a new empty image I can select the size. Unfortunately there is no option for a 90 minutes CD. When I create the image with 800 MB and I try to burn it, di
-
My iMac will only start up in Safe Mode. When I restart it normally, I get the white screen again. Any idea what's up with it?
-
QuickTime 7.1.3 and Group Policey
I have been trying to get the new version to push to my windows XP workstations from my windows server 2003 AD group policies. First I have got it to install but the Language is set for something like Chinese or something. I unfortunately need to be