Invalid server: while using wlan after upgraded to...

After upgraded to the new firmware (520007). While connect using wlan my phone shows that Invalid server and some times not replying. I goggled my problem and found that most are facing the same problem; is there any solution for it?  Advance thaks.

Try deleting your wlan settings and key in a new setting after rebooting the phone. It may help...
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

Similar Messages

  • Cant open doc files from the server on MacBook Air after upgrading to Maverick

    Cant open doc files from the server on MacBook Air after upgrading to Maverick, I can only open up docx file. Thank you!

    Thanks for the suggestion! I don't use Phantasm or VectorScribe (or any Astute Graphics plugins for that matter). I do, however, have a Wacom tablet and have a few plugins that concern using Blurb Book Creator as well as LiveSurface Context.
    I did the very unfortunate and foolish act of upgrading to Maverick without a backup, so postponing isn't an option for me.
    I geuss my question at this point would be, would it be worthwhile to wipe all the adobe products from my harddrive and re-install them? Or would that be a useless endeavor.
    I don't have an external hard-drive so backing up and re-installing the entire OS would be a bit much. Any suggestions?

  • Does iDVD work with Maverick? This is the first time I tried to burn a DVD using iDVD after upgrading to Maverick. It seems to get stuck at encoding menu stage and not doing anything.

    I tried to burn a DVD using iDVD after upgrading to Maverick, first time I tried after upgrading to Maverick a few weeks ago. It seems to get stuck at encoding menu stage and not doing anything. Does anyone else have the same problem?

    I did not have a DVD handy to burn but I have just created a small 2 minute video and created a Disk Image and also a VIDEO_TS folder, the encoding worked correctly, so it works with some items.
    You may get a better responce in the iDVD forum.
    https://discussions.apple.com/community/ilife/idvd
    regards

  • Mail server doesn't work after upgrading from SL to ML

    My Mail server doesn't work after upgrading from SL to ML
    Mail client connects with the Mail Server wich seems to run but then they can't receive any email...
    the problem seems to be related with dovecot ... in my smtp log i get this:
    relay=dovecot, delay=324, delays=324/0.02/0/0.01, dsn=4.3.0, status=deferred (temporary failure. Command output: pipe: fatal: pipe_command: execvp /usr/libexec/dovecot/deliver: Permission denied
    I have to say that in the usr/libexec there wasn't the dovecot directory so I just tried to create one but with no luck
    Any Ideas?
    Cheers
    Carlo
    This is my postconf -n info:
    server:Data admin$ postconf -n
    biff = no
    command_directory = /usr/sbin
    config_directory = /Library/Server/Mail/Config/postfix
    content_filter = smtp-amavis:[127.0.0.1]:10024
    daemon_directory = /usr/libexec/postfix
    data_directory = /Library/Server/Mail/Data/mta
    debug_peer_level = 2
    debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin xxgdb $daemon_directory/$process_name $process_id & sleep 5
    dovecot_destination_recipient_limit = 1
    enable_server_options = yes
    header_checks = pcre:/etc/postfix/custom_header_checks
    html_directory = /usr/share/doc/postfix/html
    imap_submit_cred_file = /Library/Server/Mail/Config/postfix/submit.cred
    inet_interfaces = all
    inet_protocols = ipv4
    mail_owner = _postfix
    mailbox_size_limit = 0
    mailbox_transport =
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains =
    message_size_limit = 20971520
    mydestination = $myhostname, localhost.$mydomain, localhost
    mydomain = moremoremore.it
    mydomain_fallback = localhost
    myhostname = server.moremoremore.it
    mynetworks = 127.0.0.0/8,192.168.178.0/24
    newaliases_path = /usr/bin/newaliases
    queue_directory = /Library/Server/Mail/Data/spool
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    relayhost = mail.mclink.it
    sample_directory = /usr/share/doc/postfix/examples
    sendmail_path = /usr/sbin/sendmail
    setgid_group = _postdrop
    smtp_sasl_auth_enable = no
    smtp_sasl_password_maps =
    smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated reject_rbl_client zen.spamhaus.org permit
    smtpd_enforce_tls = no
    smtpd_helo_required = yes
    smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
    smtpd_pw_server_security_options = cram-md5,gssapi
    smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks reject_unauth_destination check_policy_service unix:private/policy permit
    smtpd_sasl_auth_enable = yes
    smtpd_tls_CAfile = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.chain.pem
    smtpd_tls_cert_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.cert.pem
    smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
    smtpd_tls_key_file = /etc/certificates/server.moremoremore.it.A358901573EE7B9B4D489725407934780D24D5 36.key.pem
    smtpd_use_pw_server = yes
    smtpd_use_tls = yes
    tls_random_source = dev:/dev/urandom
    unknown_local_recipient_reject_code = 550
    virtual_alias_maps =
    server:Data admin$

    if this could help:
    mail:setStateVersion = 1
    mail:readWriteSettingsVersion = 1
    mail:connectionCount = 11
    mail:servicePortsRestrictionInfo = _empty_array
    mail:protocolsArray:_array_index:0:status = "ON"
    mail:protocolsArray:_array_index:0:kind = "INCOMING"
    mail:protocolsArray:_array_index:0:protocol = "IMAP"
    mail:protocolsArray:_array_index:0:state = "RUNNING"
    mail:protocolsArray:_array_index:0:error = ""
    mail:protocolsArray:_array_index:1:status = "ON"
    mail:protocolsArray:_array_index:1:kind = "INCOMING"
    mail:protocolsArray:_array_index:1:protocol = "POP3"
    mail:protocolsArray:_array_index:1:state = "RUNNING"
    mail:protocolsArray:_array_index:1:error = ""
    mail:protocolsArray:_array_index:2:status = "ON"
    mail:protocolsArray:_array_index:2:kind = "INCOMING"
    mail:protocolsArray:_array_index:2:protocol = "SMTP"
    mail:protocolsArray:_array_index:2:state = "RUNNING"
    mail:protocolsArray:_array_index:2:error = ""
    mail:protocolsArray:_array_index:3:status = "ON"
    mail:protocolsArray:_array_index:3:kind = "OUTGOING"
    mail:protocolsArray:_array_index:3:protocol = "SMTP"
    mail:protocolsArray:_array_index:3:state = "RUNNING"
    mail:protocolsArray:_array_index:3:error = ""
    mail:protocolsArray:_array_index:4:status = "OFF"
    mail:protocolsArray:_array_index:4:kind = "INCOMING"
    mail:protocolsArray:_array_index:4:protocol = "Junk_mail_filter"
    mail:protocolsArray:_array_index:4:state = "STOPPED"
    mail:protocolsArray:_array_index:4:error = ""
    mail:protocolsArray:_array_index:5:status = "OFF"
    mail:protocolsArray:_array_index:5:kind = "INCOMING"
    mail:protocolsArray:_array_index:5:protocol = "Virus_scanner"
    mail:protocolsArray:_array_index:5:state = "STOPPED"
    mail:protocolsArray:_array_index:5:error = ""
    mail:startedTime = "2013-01-21 21:18:32 +0000"
    mail:logPaths:IMAP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:Server Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:POP Log = "/Library/Logs/Mail/mailaccess.log"
    mail:logPaths:SMTP Log = "/var/log/mail.log"
    mail:logPaths:Migration Log = "/Library/Logs/MailMigration.log"
    mail:logPaths:Virus Log = "/Library/Logs/Mail/clamav.log"
    mail:logPaths:Amavisd Log = "/Library/Logs/Mail/amavis.log"
    mail:logPaths:Virus DB Log = "/Library/Logs/Mail/freshclam.log"
    mail:imapStartedTime = "2013-01-21 21:18:34 +0000"
    mail:servicePortsAreRestricted = "NO"
    mail:state = "RUNNING"
    mail:postfixStartedTime = "2013-01-21 21:18:32 +0000"

  • RAM using higher after upgrade OS X 10.9

    RAM using higher after upgrade the OS X 10.9 in MacBook Pro 13 (2011).
    Still its using atleast 4GB RAM normally after the startup...!   then 2 -3 apps in use the it take more RAM 5.30Gb out of 8GB...!! 
    But Still Mac working Faster..
    Thanks

    Now I'm testing...    These all apps as same time...  RAM using 7.98 Gb out of 8GB
    But Mac Still FASTER>>>!!
    Mail
    Safari with 5 tabs
    Firefox with 5tabs
    Chrome with 5tabs
    iTunes
    iBooks
    Maps
    Calender
    PhotoBooth
    Preview
    iMovie
    iPhoto
    Activity Monitor
    uTorrent
    Skype
    Adobe Audition
    Final Cut Pro
    Awesome..!!

  • Battery drain while using Safari after 8.2 ios upgrade?

    Anyone else having battery drain issues after upgrading to 8.2? When I use Safari a lot, I notice the battery drains quickly. I see that the Safari loading icon is often animated.
    Also, I saw a suggestion to turn off motion and fitness tracking or something in the privacy settings, but I don't see that option in my iPhone 5. Can this be turned off on iPhone 5?
    iOS 8.2 has been terrible for me. How was this allowed to get out of beta? Dictation is screwed up in Safari, and it doesn't fix the longstandig copy and paste bug (in Safari the cut/select/copy options disappear after half a second) nor does it fix the atrocious way that Safari reloads tabs when you toggle between them. The tabs didn't used to reload every time before ios 8. The reloading of the Safari tabs makes you lose anything you have written in forms on Safari pages.
    Apple really needs to get its act together. The software has been so much less reliable than in previous years. Are the beta testers even doing their jobs?
    Anyway, if anyone has any suggestions about the battery drain issue or anything else mentioned here, it would be greatly appreciated.
    Thank you!

    Facing battery drain issues after upgrading to 8.2. turned off location services and background refresh for a bunch of apps and also turned off motion and fitness tracking but still battery drains no matter what you do.
    iOS 8.2 is terrible for me too.
    Apple really needs to get its act together. The software has been so much less reliable than in previous years. Are the beta testers even doing their jobs?
    IPhone 6, iOS 8.2

  • ORA-01722: invalid number (Error in Application after upgrade to 3.0)

    Dear All,
    After upgrading to 3.0 I am no longer able to login to my application. The error I am seeing is:
    ORA-01722: invalid number
         Error      Could not process show_hide_memory.show_hide_collection_output procedure !
    Please help me pin-point the issue and fixed it.
    This happens in some applications but in others it doesn't...
    Regards,
    Pawel.

    I believe I have found the source of the problem!
    This is coming from the sample application which was used for the show/hide of regions example.
    The code behind the above procedure is:
    CREATE OR REPLACE
    PACKAGE show_hide_memory AS
    PROCEDURE show_hide_collection;
    PROCEDURE show_hide_collection_output;
    END;
    CREATE OR REPLACE PACKAGE BODY show_hide_memory AS
    PROCEDURE show_hide_collection AS
    l_arr apex_application_global.vc_arr2;
    l_found boolean := FALSE;
    l_collection_name VARCHAR2(255) := 'SHOW_HIDE_COLLECTION';
    BEGIN
    IF(wwv_flow_collection.collection_exists(p_collection_name => l_collection_name) = FALSE) THEN
    htmldb_collection.create_or_truncate_collection(p_collection_name => l_collection_name);
    END IF;
    l_arr := apex_util.string_to_table(p_string => v('TEMPORARY_ITEM'), p_separator => ']');
    -- If the array member count of l_arr < 3, then the following code will raise an exception
    FOR c1 IN
    (SELECT seq_id
    FROM apex_collections
    WHERE collection_name = l_collection_name
    AND c001 = l_arr(1)
    AND c002 = l_arr(2)
    AND c003 = l_arr(3))
    LOOP
    -- It exists, so delete it
    apex_collection.delete_member(p_collection_name => l_collection_name, p_seq => c1.seq_id);
    l_found := TRUE;
    END LOOP;
    IF l_found = FALSE THEN
    apex_collection.add_member(p_collection_name => l_collection_name, p_c001 => l_arr(1), p_c002 => l_arr(2), p_c003 => l_arr(3));
    END IF;
    COMMIT;
    END show_hide_collection;
    PROCEDURE show_hide_collection_output AS
    BEGIN
    htp.prn('<script type="text/javascript">' || CHR(10));
    htp.prn('<!--' || CHR(10));
    htp.prn('window.onload=function(){' || CHR(10));
    FOR c1 IN
    (SELECT c003
    FROM apex_collections
    WHERE collection_name = 'SHOW_HIDE_COLLECTION'
    AND c001 = wwv_flow.g_flow_id
    AND c002 = wwv_flow.g_flow_step_id)
    LOOP
    htp.prn('htmldb_ToggleWithImage(''' || c1.c003 || 'img'',''' || c1.c003 || 'body'');' || CHR(10));
    END LOOP;
    htp.prn('}' || CHR(10));
    htp.prn('//-->' || CHR(10));
    htp.prn('</script>' || CHR(10));
    END show_hide_collection_output;
    END;
    I guess now I have to find the bug in the above code !

  • Dashboard Design Cache Server failed to start after upgrade to BOBJ 4.0 SP09 Patch 3

    Hi Friends,
    We have upgraded our BOBJ 4.0 server from SP04 Patch 8 to SP09 patch 3.
    After upgrade completed "Dashboard Design Cache Server" Failed to start. other servers are running fine.
    xccache_<hostname>.DashboardDesignCacheServer_trace.000003.glf Error Log:
    |c24257f2-85df-0f2b-efe2-d7cfe59df826|2014 06 19 14:04:21:444|-0400|Information|Information|>=|S| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200||{|0|1|0|1|-|-|-|-|-|-||||||||||||SessionManagerFactory::createInstance
    -:0:-: TraceLog message 1241
    |84f9fa46-c9ce-d9c4-fb5b-a08e6b6c1fea|2014 06 19 14:04:21:451|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||using OSGi emulation; cause: java.lang.ClassNotFoundException: org.eclipse.core.runtime.Platform
    -:0:-: TraceLog message 1242
    |2eb28d2c-acaa-e2ff-26de-0ce297ad41e5|2014 06 19 14:04:21:502|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||adding contributions from "jar:file:/bobje/sap_bobj/enterprise_xi40/java/lib/dsl_engine.jar!/META-INF/DSLContributions/DSLContributions.properties": DSL-Contribution = com.sap.sl.sdk.datasource.strategy.DataSourceStrategyContribution,com.sap.sl.sdk.services.session.BridgeSessionContribution,com.sap.sl.sdk.session.cms.BridgeCmsSessionContribution,com.sap.sl.sdk.session.filesystem.BridgeFileSystemSessionContribution,com.sap.sl.contributions.EPackageContribution,com.businessobjects.dsl.framework.session.SessionContribution,com.sap.sl.core.emf.registry.GeneratedPackageContribution,com.businessobjects.dsl.services.JavaDPContribution,com.businessobjects.dsl.services.repository.RepositoryServicesContribution,com.businessobjects.dsl.services.olap.sapbw.SapBwBrowsingServicesContribution,com.businessobjects.dsl.services.universe.UniverseServicesContribution,com.businessobjects.dsl.services.security.SecurityServicesContribution,com.businessobjects.mds.consumption.ConsumptionContribution,com.businessobjects.mds.consumption.SecurityKeyServiceContribution,com.businessobjects.mds.olap.protocol.bics.BICSClientContribution,com.businessobjects.mds.olap.protocol.ess_japi.EssJapiClientContribution,com.businessobjects.mds.olap.protocol.sapbapi.SapRfcClientContribution,com.businessobjects.mds.olap.protocol.xmla.XMLAClientContribution,com.businessobjects.mds.olap.OlapClientContribution,com.businessobjects.mds.publishing.PublishingContribution,com.businessobjects.mds.repository.cms.CMSSessionContribution,com.businessobjects.mds.repository.filesystem.FSSessionContribution,com.businessobjects.mds.repository.memory.MemorySessionContribution,com.businessobjects.mds.securedconnection.services.SecuredConnectionContribution,com.businessobjects.mds.security.cms.CMSSecurityContribution,com.businessobjects.mds.security.SecurityContribution,com.businessobjects.mds.services.internal.MdsModelContribution,com.sap.sl.edp.dataprovider.bics.BicsDataProviderBuilderContribution,com.sap.sl.edp.dataprovider.olap.OlapDataProviderBuilderContribution,com.sap.sl.edp.dataprovider.relational.RelationalDataProviderBuilderContribution,com.sap.sl.pquery.PQueryServiceContribution
    jvm/Bootstrap.cpp:146:-: TraceLog message 1243
    |9992bc42-cf8b-51bd-739f-ee471da81b76|2014 06 19 14:04:22:292|-0400|Debug| |<<| | |xccache_halsapad12.DashboardDesignCacheServer|16574|47600550826240|| ||||||||||||||||||||||ras21-core: CBootstrap::getSLUserSecurity starting wait loop[3], timeout[119]
    -:0:-: TraceLog message 1244
    |762aa011-8afb-af8d-6bd6-a61be1be142d|2014 06 19 14:04:22:399|-0400|Error| |>>| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| |0|1|0|1|-|-|-|-|-|-||||||||||com.businessobjects.dsl.commons.platform.OsgiPlatform||java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
            at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
            at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
            at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
            at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
            at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
            at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
            at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
            at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
            at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
            at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
    Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
            at sun.awt.AppContext$2.run(AppContext.java:237)
            at sun.awt.AppContext$2.run(AppContext.java:226)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
            at sun.awt.AppContext.access$200(AppContext.java:112)
            at sun.awt.AppContext$3.run(AppContext.java:294)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.getAppContext(AppContext.java:275)
            at sun.awt.AppContext$6.getContext(AppContext.java:822)
            at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
            at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
            at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
            at java.util.TimeZone.getDefault(TimeZone.java:515)
            at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
            at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
            at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
            at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
            at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
            at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
            at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
            at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
            at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
            ... 21 more
    Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
            at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
            at java.lang.Runtime.load0(Runtime.java:770)
            at java.lang.System.load(System.java:1011)
            at java.lang.ClassLoader$NativeLibrary.load(Native Method)
            at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
            at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
            at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
            at java.lang.Runtime.loadLibrary0(Runtime.java:823)
            at java.lang.System.loadLibrary(System.java:1036)
            at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
            at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
            at sun.awt.AppContext$2.run(AppContext.java:237)
            at sun.awt.AppContext$2.run(AppContext.java:226)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
            at sun.awt.AppContext.access$200(AppContext.java:112)
            at sun.awt.AppContext$3.run(AppContext.java:294)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.getAppContext(AppContext.java:275)
            at com.sun.jmx.trace.Trace.out(Trace.java:180)
            at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
            at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
            at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
            at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
            at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
            at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
            at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
            at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
            at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
            at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
            at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
            at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
            at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
            at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
            at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
            at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
            at java.lang.Thread.run(Thread.java:743)
    -:0:-: TraceLog message 1245
    |4ab25da4-f37d-97ff-b2ad-a97877076bb3|2014 06 19 14:04:22:399|-0400|Information|Information|>=|S| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200||}|0|1|0|1|-|-|-|-|-|-||||||||||||SessionManagerFactory::createInstance: 00.957
    -:0:-: TraceLog message 1246
    |d3abc036-3e0f-728a-7dba-e3b540d39fe6|2014 06 19 14:04:22:451|-0400|Error| |>>| | |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.bridge.JavaBridgeMain||Could not initialize processing subsystem
    java.lang.ExceptionInInitializerError
            at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
            at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
            at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
            at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
            at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
            at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
            at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
            at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
            at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
            at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
    Caused by: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:243)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
            ... 10 more
    Caused by: java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
            ... 11 more
    Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
            at sun.awt.AppContext$2.run(AppContext.java:237)
            at sun.awt.AppContext$2.run(AppContext.java:226)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
            at sun.awt.AppContext.access$200(AppContext.java:112)
            at sun.awt.AppContext$3.run(AppContext.java:294)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.getAppContext(AppContext.java:275)
            at sun.awt.AppContext$6.getContext(AppContext.java:822)
            at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
            at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
            at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
            at java.util.TimeZone.getDefault(TimeZone.java:515)
            at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
            at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
            at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
            at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
            at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
            at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
            at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
            at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
            at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
            ... 21 more
    Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
            at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
            at java.lang.Runtime.load0(Runtime.java:770)
            at java.lang.System.load(System.java:1011)
            at java.lang.ClassLoader$NativeLibrary.load(Native Method)
            at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
            at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
            at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
            at java.lang.Runtime.loadLibrary0(Runtime.java:823)
            at java.lang.System.loadLibrary(System.java:1036)
            at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
            at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
            at sun.awt.AppContext$2.run(AppContext.java:237)
            at sun.awt.AppContext$2.run(AppContext.java:226)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
            at sun.awt.AppContext.access$200(AppContext.java:112)
            at sun.awt.AppContext$3.run(AppContext.java:294)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.getAppContext(AppContext.java:275)
            at com.sun.jmx.trace.Trace.out(Trace.java:180)
            at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
            at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
            at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
            at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
            at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
            at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
            at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
            at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
            at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
            at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
            at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
            at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
            at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
            at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
            at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
            at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
            at java.lang.Thread.run(Thread.java:743)
    -:0:-: TraceLog message 1247
    |7fad3c80-8dfb-1944-911f-4d98498f150a|2014 06 19 14:04:22:491|-0400| |Fatal|  |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||Caught Error at top level
    java.lang.ExceptionInInitializerError
            at com.businessobjects.dsl.framework.session.SessionContribution.register(SessionContribution.java:71)
            at com.businessobjects.dsl.framework.session.SessionManagerFactory.initializeExtensionPoint(SessionManagerFactory.java:377)
            at com.businessobjects.dsl.framework.session.SessionManagerFactory.createInstance(SessionManagerFactory.java:340)
            at com.businessobjects.dsl.framework.session.SessionManagerFactory.getInstance(SessionManagerFactory.java:205)
            at com.businessobjects.ras21.servercore.externalservicessubsystem.UserSecurityCalculator.<clinit>(UserSecurityCalculator.java:38)
            at com.businessobjects.ras21.servercore.externalservicessubsystem.SecurityCalculator.<init>(SecurityCalculator.java:89)
            at com.businessobjects.ras21.servercore.bridge.servant.SLUserSecurityServant.<init>(SLUserSecurityServant.java:125)
            at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runServants(JavaBridgeMain.java:224)
            at com.businessobjects.ras21.servercore.bridge.JavaBridgeMain.runAdapter(JavaBridgeMain.java:56)
            at com.businessobjects.ras21.servercore.servercontainer.ProcChildMain.main(ProcChildMain.java:141)
    Caused by: java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:243)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.<clinit>(OsgiPlatform.java:109)
            ... 10 more
    Caused by: java.lang.reflect.InvocationTargetException
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:597)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContribution(OsgiPlatform.java:646)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperty(OsgiPlatform.java:622)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromProperties(OsgiPlatform.java:580)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsFromPropertiesFile(OsgiPlatform.java:326)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributionsInternal(OsgiPlatform.java:281)
            at com.businessobjects.dsl.commons.platform.OsgiPlatform.addContributions(OsgiPlatform.java:239)
            ... 11 more
    Caused by: java.lang.NoClassDefFoundError: sun/awt/SunToolkit : cannot initialize class because prior initialization attempt failed
            at sun.awt.AppContext$2.run(AppContext.java:237)
            at sun.awt.AppContext$2.run(AppContext.java:226)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
            at sun.awt.AppContext.access$200(AppContext.java:112)
            at sun.awt.AppContext$3.run(AppContext.java:294)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.getAppContext(AppContext.java:275)
            at sun.awt.AppContext$6.getContext(AppContext.java:822)
            at sun.misc.SharedSecrets.getJavaAWTAccess(SharedSecrets.java:144)
            at java.util.TimeZone.getDefaultInAppContext(TimeZone.java:635)
            at java.util.TimeZone.getDefaultRef(TimeZone.java:523)
            at java.util.TimeZone.getDefault(TimeZone.java:515)
            at java.text.SimpleDateFormat.initializeCalendar(SimpleDateFormat.java:598)
            at java.text.SimpleDateFormat.<init>(SimpleDateFormat.java:496)
            at org.eclipse.emf.ecore.impl.EFactoryImpl$SafeSimpleDateFormat.<init>(EFactoryImpl.java:712)
            at org.eclipse.emf.ecore.impl.EFactoryImpl.<clinit>(EFactoryImpl.java:730)
            at com.businessobjects.mds.universe.UniverseFactory.<clinit>(UniverseFactory.java:26)
            at com.businessobjects.mds.universe.impl.UniversePackageImpl.<init>(UniversePackageImpl.java:106)
            at com.businessobjects.mds.universe.impl.UniversePackageImpl.init(UniversePackageImpl.java:142)
            at com.businessobjects.mds.universe.UniversePackage.<clinit>(UniversePackage.java:62)
            at com.businessobjects.mds.services.internal.MdsModelContribution.register(MdsModelContribution.java:14)
            ... 21 more
    Caused by: java.lang.UnsatisfiedLinkError: Can't load library: /bobje/sap_bobj/enterprise_xi40/linux_x64/headless/libmawt.so
            at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1807)
            at java.lang.Runtime.load0(Runtime.java:770)
            at java.lang.System.load(System.java:1011)
            at java.lang.ClassLoader$NativeLibrary.load(Native Method)
            at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1922)
            at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1846)
            at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
            at java.lang.Runtime.loadLibrary0(Runtime.java:823)
            at java.lang.System.loadLibrary(System.java:1036)
            at sun.security.action.LoadLibraryAction.run(LoadLibraryAction.java:50)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.awt.Toolkit.loadLibraries(Toolkit.java:1605)
            at java.awt.Toolkit.<clinit>(Toolkit.java:1627)
            at sun.awt.AppContext$2.run(AppContext.java:237)
            at sun.awt.AppContext$2.run(AppContext.java:226)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.initMainAppContext(AppContext.java:226)
            at sun.awt.AppContext.access$200(AppContext.java:112)
            at sun.awt.AppContext$3.run(AppContext.java:294)
            at java.security.AccessController.doPrivileged(Native Method)
            at sun.awt.AppContext.getAppContext(AppContext.java:275)
            at com.sun.jmx.trace.Trace.out(Trace.java:180)
            at com.sun.jmx.trace.Trace.isSelected(Trace.java:88)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.isTraceOn(DefaultMBeanServerInterceptor.java:1830)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerDynamicMBean(DefaultMBeanServerInterceptor.java:929)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerObject(DefaultMBeanServerInterceptor.java:916)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.registerMBean(DefaultMBeanServerInterceptor.java:312)
            at com.sun.jmx.mbeanserver.JmxMBeanServer$2.run(JmxMBeanServer.java:1195)
            at java.security.AccessController.doPrivileged(Native Method)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.initialize(JmxMBeanServer.java:1193)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:225)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.<init>(JmxMBeanServer.java:170)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.newMBeanServer(JmxMBeanServer.java:1401)
            at javax.management.MBeanServerBuilder.newMBeanServer(MBeanServerBuilder.java:93)
            at javax.management.MBeanServerFactory.newMBeanServer(MBeanServerFactory.java:311)
            at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:214)
            at javax.management.MBeanServerFactory.createMBeanServer(MBeanServerFactory.java:175)
            at sun.management.ManagementFactory.createPlatformMBeanServer(ManagementFactory.java:302)
            at java.lang.management.ManagementFactory.getPlatformMBeanServer(ManagementFactory.java:504)
            at com.sap.sup.wily.agent.service.PlatformMBeanPoller.launchPoller(PlatformMBeanPoller.java:73)
            at com.sap.sup.wily.agent.service.PlatformMBeanPoller.IAgentService_startService(PlatformMBeanPoller.java:65)
            at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startService(ServiceAdministrator.java:432)
            at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.startServiceSafe(ServiceAdministrator.java:446)
            at com.wily.introscope.agent.service.ServiceAdministrator$ServiceInitializer.IExecutableItem_execute(ServiceAdministrator.java:310)
            at com.wily.util.task.AsynchExecutionQueue$WrapperItem.IExecutableItem_execute(AsynchExecutionQueue.java:414)
            at com.wily.util.task.AsynchExecutionQueue.doTask(AsynchExecutionQueue.java:205)
            at com.wily.util.task.ATask$CoreTask.run(ATask.java:132)
            at java.lang.Thread.run(Thread.java:743)
    -:0:-: TraceLog message 1248
    |dd2a290d-c8ad-ebea-d1b5-3ebe783e598b|2014 06 19 14:04:22:491|-0400| |Fatal|  |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||BEGIN TRACING JVM PROPERTIES
    java.vendor = <SAP AG>
    sun.management.compiler = <HotSpot 64-Bit Tiered Compilers>
    os.name = <Linux>
    sun.boot.class.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/sapjvm-alt-rt.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/resources.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/rt.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/sunrsasign.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jsse.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jce.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/charsets.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/jfr.jar:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/classes:/bobje/sap_bobj/enterprise_xi40/java/wily/Agent.jar>
    ooc.orb.oa.thread_pool = <64>
    java.vm.specification.vendor = <Sun Microsystems Inc.>
    businessobjects.server.friendlyname = <halsapad12.DashboardDesignCacheServer>
    businessobjects.logs.home = </bobje/sap_bobj/logging/>
    java.runtime.version = <6.1.055>
    com.sap.vm.version = <10>
    businessobjects.ns = <hal-sapa-d12.dc.fmcna.com:6400>
    com.wily.log4j.defaultInitOverride = <true>
    user.name = <cbi>
    user.language = <en>
    sun.boot.library.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64>
    java.version = <1.6.0_51>
    user.timezone = <America/New_York>
    java.net.preferIPv4Stack = <false>
    sun.arch.data.model = <64>
    java.endorsed.dirs = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/endorsed>
    sun.cpu.isalist = <>
    sun.jnu.encoding = <UTF-8>
    file.encoding.pkg = <sun.io>
    file.separator = </>
    java.specification.name = <Java Platform API Specification>
    com.wily.introscope.agent.agentName = <xccache_halsapad12.DashboardDesignCacheServer_java>
    java.class.version = <50.0>
    user.country = <US>
    java.home = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre>
    com.sap.vm.compressedoops = <true>
    java.vm.info = <Aug 12 2013 00:30:55 - 61_REL - optU - linux amd64 - 6 - bas2:201693 (mixed mode)>
    os.version = <2.6.18-128.el5>
    path.separator = <:>
    businessobjects.enterprise.orb.threadmodel = <threaded>
    java.vm.version = <6.1.055 23.5-b02>
    com.sap.vm.type = <opt>
    introscope.enterprisemanager.serversockets.reuseaddr = <false>
    java.awt.printerjob = <sun.print.PSPrinterJob>
    sun.io.unicode.encoding = <UnicodeLittle>
    com.sap.vm.codeline = <61_REL>
    user.home = </sapmnt/CBP/cbi>
    java.specification.vendor = <Sun Microsystems Inc.>
    tracelog.logdir = </bobje/sap_bobj/logging/>
    java.library.path = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64/server:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/../lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x64/:/bobje/sap_bobj/enterprise_xi40/linux_x86/:/bobje/sap_bobj/enterprise_xi40/linux_x64/wcs/components/:/bobje/sap_bobj/enterprise_xi40/linux_x64/plugins//auth/secEnterprise:/bobje/sap_bobj/enterprise_xi40/linux_x64/crpe/:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw/:/bobje/sap_bobj/enterprise_xi40/linux_x64/plugins//desktop/CrystalEnterprise.Report:/bobje/sap_bobj/enterprise_xi40/linux_x86/ras:/bobje/sap_bobj/mysql/lib:/bobje/sap_bobj/enterprise_xi40/dataAccess/connectionServer/drivers/lib64:/bobje/perl/lib/5.8.0/i386-linux-thread-multi/CORE:/bobje/sap_bobj/enterprise_xi40/linux_x64//sapjvm/jre/lib/amd64/server:/bobje/sap_bobj/enterprise_xi40/linux_x64//sapjvm/jre/lib/amd64:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw/lib-i86_linux/X11:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw//lib-linux:/bobje/sap_bobj/enterprise_xi40/linux_x86/crpe/mw//lib-linux_optimized:/bobje/oracle/CBI/db_home/lib:/home/db2cbi/sqllib/lib64:/home/db2cbi/sqllib/lib32:/bobje/sap_bobj/enterprise_xi40/linux_x86:/sapmnt/CBP/db2cbi/sqllib/lib64:/sapmnt/CBP/db2cbi/sqllib/lib32:/usr/X11R6/lib:/usr/java/packages/lib/amd64:/usr/lib64:/lib64:/lib:/usr/lib>
    java.vendor.url = <http://www.sap.com/>
    businessobjects.enterprise.orb.thread_pool_size = <5>
    java.vm.vendor = <SAP AG>
    java.runtime.name = <Java(TM) SE Runtime Environment>
    java.class.path = <:/bobje/sap_bobj/enterprise_xi40/java/lib//XcelsiusServer.jar:/sapmnt/CBP/db2cbi/sqllib/java/db2jcc_license_cu.jar:/sapmnt/CBP/db2cbi/sqllib/java/db2java.zip:/sapmnt/CBP/db2cbi/sqllib/java/db2jcc.jar:.::/bobje/sap_bobj/enterprise_xi40//java/wily/Agent.jar>
    tracelog.jni = <1>
    bobj.enterprise.home = </bobje/sap_bobj/enterprise_xi40/>
    businessobjects.enterprise.orb.request_timeout = <3600000>
    java.vm.specification.name = <Java Virtual Machine Specification>
    java.vm.specification.version = <1.0>
    sun.cpu.endian = <little>
    sun.os.patch.level = <unknown>
    java.awt.headless = <true>
    java.io.tmpdir = </tmp>
    java.vendor.url.bug = <http://service.sap.com/support>
    businessobjects.enterprise.orb.client_timeout = <0>
    ooc.orb.oa.conc_model = <thread_pool>
    os.arch = <amd64>
    java.awt.graphicsenv = <sun.awt.X11GraphicsEnvironment>
    java.ext.dirs = </bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/ext-sap:/bobje/sap_bobj/enterprise_xi40/linux_x64/sapjvm/jre/lib/ext:/usr/java/packages/lib/ext>
    user.dir = </bobje/sap_bobj/enterprise_xi40/linux_x64>
    bobj.logging = <true>
    line.separator = <
    >
    java.vm.name = <SAP Java Server VM>
    file.encoding = <UTF-8>
    tracelog.process = <xccache_halsapad12.DashboardDesignCacheServer_java>
    com.sap.vm.profilingserver = <true>
    java.specification.version = <1.6>
    com.wily.introscope.agentProfile = </bobje/sap_bobj/enterprise_xi40//java/wily/halsapad12.DashboardDesignCacheServer.profile>
    END TRACING JVM PROPERTIES
    -:0:-: TraceLog message 1249
    |a79b935e-9c92-9957-35bf-2c937079beb8|2014 06 19 14:04:22:492|-0400| |Fatal|  |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||BEGIN TRACING COMMAND LINE
      -loggingPath
      /bobje/sap_bobj/logging/
      -cache
      -documentType
      CrystalEnterprise.XL.Query
      -nops
      -restart
      -fg
      -name
      halsapad12.DashboardDesignCacheServer
      -pidfile
      /bobje/sap_bobj/serverpids/halsapad12_halsapad12.DashboardDesignCacheServer.pid
      -ns
      hal-sapa-d12.dc.fmcna.com:6400
      -procParentIOR
      IOR:010000002500000049444c3a4a6176614272696467652f4941646170746572426f6f7473747261703a312e300000000001000000000000005a000000010101ca1a00000068616c2d736170612d6431322e64632e666d636e612e636f6d006cbd10000000000000001c26a353bb16050003000000010000000100000014000000011af5ca010001000000000000010100000000000200
      -libraryName
      XcelsiusServer
      -useSLUS
    END TRACING COMMAND LINE
    -:0:-: TraceLog message 1250
    |088b0565-be95-fe7f-e474-4e3c45773bbc|2014 06 19 14:04:22:492|-0400| |Fatal|  |F| |xccache_halsapad12.DashboardDesignCacheServer|16574|1098107200|| ||||||||||||||||||||com.businessobjects.ras21.servercore.servercontainer.ProcChildMain||11 threads are still alive in this JVM
    Thread 'Thread[main,5,main]' is still alive
    Thread 'Thread[Business Objects - Sessions Clean up,5,main]' is still alive
    Thread 'Thread[Thread-2,5,main]' is still alive
    Thread 'Thread[Configuration Watch Heartbeat Heartbeat,5,Agent]' is still alive
    Thread 'Thread[Remove Metric Data Watch Heartbeat Heartbeat,5,Agent]' is still alive
    Thread 'Thread[Agent Heartbeat,5,Agent]' is still alive
    Thread 'Thread[Agent Execution,5,Agent]' is still alive
    Thread 'Thread[Agent ServerConnection,5,Agent]' is still alive
    Thread 'Thread[UnknownHub Hub Transmit 1,5,Agent]' is still alive
    Thread 'Thread[UnknownHub Hub Receive 1,5,Agent]' is still alive
    Thread 'Thread[PO:client_main Mailman 1,5,Agent]' is still alive
    Regards
    Kannan K

    Kannan,
    the error in your logs like "NoClassDefFoundError" etc. point us towards issues with jar files. either they are missing or not the correct ones.
    A general practice in such situation is to
    stop all servers except CMS,IFRS,OFRS > repair the base installation
    OR
    If you have a working environment with the exact same patch, copy the 'lib' folder from "/bobje/sap_bobj/enterprise_xi40/java/" to the non-working server.
    PS: please attach the logs to the thread instead of pasting the content.
    -Nikhil Nair

  • Client login to OS/X server doesn't work after upgrade to 10.9.3

    I have been running a Mountian Lion Server with open directory to handle several Mac's at home. After upgrading from 10.8.x to 10.9.3 a few days ago login from the client computer with 10.9.3 does't work. If I turn off Wi-fi, login works, and I can access everything after re-enabling wi-fi.
    Works with client computer and 10.9.2. It also works with login to wiki on this server, using safari from my computer.
    /Casi

    I have several network user set up on a server computer.  This computer, macMini, is running 10.9.3 and the latent version of OS/X server.
    When logging in on a MacBook PRO with 10.9.3, and the computer is on the same network as the server, wi-fi or Ethernet cable, i'm not granted access to the network accounts. The screem-shot above is from the server log.
    When not connected to the local network does login work.
    Same issue with two network accounts. But, when trying a MacBook Air with 10.9.2 is it working with both these networks accounts.
    If disable wi-fi, login and then enable wi-fi can I access all resources on the server as shared disks and replicate home directories. Same procedure works with the 10base6 Ethernet cable, i.e. Pull out the contact, login, put in in the contact.

  • VPN Server broken with Windows after upgrade from Tiger.

    Hey there
    I use Tiger 10.4 Server on a PowerMac G4.
    It has two network interfaces, one public facing with it's own static IP, and the other internal facing.
    The VPN service works perfectly, and allows people to connect via L2TP and assignes them an IP on the internal facing subnet, and allows OS X and Windows clients to connect.
    However after upgrading to Leopard, only Mac clients can connect, all the Windows clients connect, and although they get an IP and are able to ping destinations, attempts to connect to these destinations (some of which are web apps on port 80, others are file servers running Samba), they just sit waiting for ever.
    I've experimented with this problem, and it appears to be a problem with MTU and packet fragmentation, however these settings appear to be the same between Tiger, which worked, and Leopard which does not work.
    Does anyone have any experience with the new VPN Server in Leopard, and can offer me any advice on how to fix this problem? I'm currently downgraded to Tiger again until a fix can be found.

    I had the same issue, among others, but I finally got everything to work eventually. It seems that if the IP range of the client connecting to VPN is in the same range of the server LAN, there will be connectivity issues, whether it be pcs and/or macs not being able to connect. The following set up got my VPN services working:
    1. Get DNS and Open Directory working properly. When I did an upgrade, the Server Admin updated my zone files with a curious extra space, which killed DNS. For example, I had the name server as ns.company.private., but in the files it would say ns. company.private everywhere! I've been reading about various bugs in upgrading DNS, so I think it's best just to start DNS from scratch. But if you are upgrading, the following thread expalins how to go about setting up DNS and Open Directory: http://discussions.apple.com/thread.jspa?messageID=5957209&#5957209
    2. Once you have Open directory users and dns working properly, then set up VPN. Give a unique IP range to the internal network (192.168.7.1/24) that other networks will not emulate. If you use 192.168.1.1, you will likely run into issues. You can always test this method out by changing the IP range from a remote location and trying to get in this way instead of changing the server. Also, be aware that if you use Gateway Assistant within NAT, it will automatically give you a 192.168.1.1/24 range, at least that's been my experience, and this always killed VPN for me. I would set up NAT manually to avoid problems.
    3. Ensure that the DNS information under the Client Information tab is correct. For my server I have 192.168.9.1 as the nameserver, and company.private as the search domain. Then set up routing tables. Mine are 192.168.0.0:255.255.0.0 private and 0.0.0.0:0.0.0.0 public.
    Also, when you restart the server, stop and restart VPN services, as there is some talk about the Tiger bug still being around, where VPN services are messed up upon startup. This all worked for me and a couple others that had similar server set ups. Hopefully this will work for you.

  • Invalid object [xla,Flex,etc] after upgrade 11.2.0.3

    hai all ,
    im on solaris 11 cluster sun sparc , and my plan is installed eBS
    after i instal ebs , now next step is upgrade database to 11.2.0.3
    upgrade success but when i select invalid object from dba_objects , it show :
    FED_LOC_FLEX
    PR_LOC_FLEX
    AR_LOC_FLEX_PROVINCE_PC
    XLA_00707_AAD_C_000026_PKG
    XLA_00200_AAD_C_000017_PKG
    XLA_00200_AAD_C_000016_PKG
    XLA_00200_AAD_S_000032_PKG
    XLA_00200_AAD_S_000034_PKG
    XLA_00200_AAD_S_000039_PKG
    XLA_00200_AAD_S_000041_PKG
    XLA_00200_AAD_C_000020_PKG
    XLA_00200_AAD_C_000018_PKG
    XLA_00200_AAD_C_000021_PKG
    XLA_00555_AAD_S_000014_PKG
    XLA_00555_AAD_C_000015_PKG
    XLA_00200_AAD_C_000022_PKG
    FSAH_DUPLICATE_PKG
    XLA_00140_AAD_S_000036_PKG
    XLA_00707_AAD_C_000044_PKG
    MSD_DEM_OBI_DEMANTRA_MV
    BISM_CALC_FILTER
    itry to compile using utlrp.sql and using adadmin utility ( Re-create grants and synonyms for APPS schema & compile apps schema )
    but the error still same, any someone can help me ?

    Please also see:
    Xla Invalids After Upgrade From 11i To Release 12 [ID 1302349.1]
    XLA Package Invalid in 12.1.1 [ID 1093888.1]
    R12: Invalid Xla Objects After Upgrade from 11i To R12 - Unable To Compile [ID 1238973.1]
    Unable To Compile Invalid XLA Objects [ID 1468836.1]
    R12.1.1 - Invalid Objects After Patching [ID 1093163.1]
    Troubleshooting Guide - invalid objects in the E-Business Suite Environment 11i and 12 [ID 1325394.1]
    R12.1:Invalid Objects After 11gr2 Db And Ebs 12.1.3 Upgrade [ID 1342701.1]
    Thanks,
    Hussein

  • I can't use firefox after upgrading to 4.0. I get the message I have to restart my computer for upgrading, but ik doesn't start. I get the message over and over

    I can't open firefox after upgrading to 4.0
    I get the message over and over again that i have to restart my computer for upgrading to firefox.
    I tried new installation. But i got problems on all my accounts

    Start your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
    Starting The Computer In Safe Mode;
    If running, turn your computer off.
    Remove any disks and thumb drives that are in your hard drives or ports.
    Now start your computer but also;
    '''Windows; '''Press the <F8> key repeatedly.
    '''Mac: '''Hold down the Shift key.
    '''Linux; '''Using the command line, Linux/Unix computers can be booted
    into various run levels that determine which resources are loaded.
    For example, "runlevel 1" is typically the equivalent to Windows and
    Mac safe modes.
    * Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
    When the '''Boot''' menu is displayed, release the key you were pressing.
    You must now choose what mode to use. The most used are;
    * Safe Mode; The computer runs with only a minimum set of programs.
    * Safe Mode '''With '''Networking; Same as above, but with internet access.

  • Can no longer use pages after upgrade, even after three restorations! Huge inconvenience!!

    Can anyone help me with why I can no longer use pages after the latest upgrade to iOS 7.04. I have restored my ipad three times and it still won't work. It s ahuge inconvenience when all my documents are on pages. If you can get back to me as soon as possible that would be great!!

    Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
    Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
    Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
    Enable iCloud syncing for Pages on your mobile device and launch the App.
    If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many).

  • WebLogic Server can not start after upgrade from 10.3.3 to 10.3.5

    Hi all,
    I get follwoing errors after upgrade fmw-share libraries (WLS 11.1.1.3 to 11.1.1.5), if I want to start AdminServer. It seems CLASSPATH is not updated correct. How can I solve this issue?
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JRF Startup Class", java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
    java.lang.ClassNotFoundException: oracle.jrf.wls.JRFStartup
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JPS Startup Class", java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
    java.lang.ClassNotFoundException: oracle.security.jps.wls.JpsWlsStartupClass
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "ODL-Startup", java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
    java.lang.ClassNotFoundException: oracle.core.ojdl.weblogic.ODLConfiguration
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "AWT Application Context Startup Class", java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
    java.lang.ClassNotFoundException: oracle.jrf.AppContextStartup
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JMX Framework Startup Class", java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
    java.lang.ClassNotFoundException: oracle.as.jmx.framework.wls.spi.StartupListener
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "JOC-Startup", java.lang.ClassNotFoundException: oracle.ias.cache.Startup
    java.lang.ClassNotFoundException: oracle.ias.cache.Startup
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    <Jan 19, 2012 8:31:34 AM EST> <Critical> <WebLogicServer> <BEA-000286> <Failed to invoke startup class "DMS-Startup", java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
    java.lang.ClassNotFoundException: oracle.dms.wls.DMSStartup
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:305)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:246)
    Truncated. see log file for complete stacktrace
    >
    Thanks,
    Mohammad

    Hi Mohammad,
    You are right, this error seems to indicate that the script environment cannot find the required java classes.
    Please try the following:
    1. Open a shell (command prompt) on the computer on which you created the domain.
    2. Change to the directory in which you located the domain.
    By default, this directory is BEA_HOME\user_projects\domains\domain_name, where BEA_HOME is the top-level installation directory of Oracle WebLogic products.
    3. Set up your environment by running one of the following scripts:
    bin\setDomainEnv.cmd (Windows)
    bin/setDomainEnv.sh (UNIX)
    On Windows, you can use a shortcut on the Start menu to set your environment variables and invoke WLST (ToolsWebLogic Scripting Tool).
    4. Invoke WLST by entering: java weblogic.WLST
    The WLST prompt appears.
    wls:/(offline)>
    5. Then you can start the AdminServer with WLST
    startServer('AdminServer','ClassicDomain','t3://localhost:7001','weblogic','password','/home/oracle/Oracle/Middleware/user_projects/domains/ClassicDomain')
    This link may also help: http://download.oracle.com/docs/cd/E12840_01/wls/docs103/config_scripting/manage_servers.html#wp1009240
    Hope your issue gets resolved.
    Thanks,
    Cris

  • Problem while using receive after invoke activity

    Hi,i have got a problem while using a receive activity,after a invoke activity.The invoke acivity seems that does not work and also the debugger runs forever....But if i remove the receive activity,the invoke activity works fine.
    <h2>The output of GlassfishV2 is:<h2>
    This is from the exception block.
    com.sun.bpel.model.meta.impl.RInvokeImpl@f590c6={<?xml version="1.0" encoding="utf-8" ?>
    *<invoke name="Invoke1"*
    partnerLink="PartnerLink2"
    portType="tns:test_service3"
    operation="luizao"
    inputVariable="LuizaoIn"
    outputVariable="LuizaoOut"
    xmlns:tns="http://dim.test.org/"></invoke>}
    *[Fatal Error] :1:1: Content is not allowed in prolog.*
    System exception occured while executing a business process instance.
    java.lang.NullPointerException: WSDL message model is null
    at com.sun.jbi.engine.bpel.core.bpel.debug.WSDLMessageImpl.<init>(WSDLMessageImpl.java:56)
    at com.sun.jbi.engine.bpel.core.bpel.engine.impl.CallFrame.onFault(CallFrame.java:380)
    at com.sun.jbi.engine.bpel.core.bpel.model.runtime.impl.SyntheticThrowUnitImpl.doAction(SyntheticThrowUnitImpl.java:91)
    at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELInterpreter.execute(BPELInterpreter.java:145)
    at com.sun.jbi.engine.bpel.core.bpel.engine.BusinessProcessInstanceThread.execute(BusinessProcessInstanceThread.java:76)
    at com.sun.jbi.engine.bpel.core.bpel.engine.impl.BPELProcessManagerImpl.process(BPELProcessManagerImpl.java:818)
    at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:261)
    at com.sun.jbi.engine.bpel.core.bpel.engine.impl.EngineImpl.process(EngineImpl.java:742)
    at com.sun.jbi.engine.bpel.BPELSEInOutThread.processRequest(BPELSEInOutThread.java:401)
    at com.sun.jbi.engine.bpel.BPELSEInOutThread.processMsgEx(BPELSEInOutThread.java:240)
    at com.sun.jbi.engine.bpel.BPELSEInOutThread.run(BPELSEInOutThread.java:158)
    This is from the exception block.
    I think correlation sets are ok(i have two receive activities).
    I use Netbeans6.0 IDE.
    Can anyone help me?
    Sorry,but i don't speak English fluently

    I can't debug it more,because the bpel variables window disappears when the proccess comes to invoke activity.
    The bpel code is simple:I have got a sequence with follow activities:
    receive
    assign
    invoke
    receive
    assign
    reply
    The code is:
    <?xml version="1.0" encoding="UTF-8"?>
    <process
        name="Testfile2"
        targetNamespace="http://enterprise.netbeans.org/bpel/Test2/Testfile2"
        xmlns="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
        xmlns:xsd="http://www.w3.org/2001/XMLSchema"
        xmlns:tns="http://enterprise.netbeans.org/bpel/Test2/Testfile2" xmlns:ns0="http://xml.netbeans.org/schema/Testfile2" xmlns:ns1="http://j2ee.netbeans.org/wsdl/Testfile2">
       <import namespace="http://j2ee.netbeans.org/wsdl/Testfile2" location="Testfile2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
       <import namespace="http://enterprise.netbeans.org/bpel/test_service3Wrapper" location="Partners/test_service3/test_service3Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
       <import namespace="http://dim.test.org/" location="Partners/test_service3/test_service3.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
       <import namespace="http://enterprise.netbeans.org/bpel/test_service2Wrapper" location="Partners/test_service2/test_service2Wrapper.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
       <import namespace="http://dim.test.org/" location="Partners/test_service2/test_service2.wsdl" importType="http://schemas.xmlsoap.org/wsdl/"/>
       <partnerLinks>
          <partnerLink name="PartnerLink3" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service2Wrapper" partnerLinkType="tns:test_service2LinkType" myRole="test_service2Role"/>
          <partnerLink name="PartnerLink2" xmlns:tns="http://enterprise.netbeans.org/bpel/test_service3Wrapper" partnerLinkType="tns:test_service3LinkType" partnerRole="test_service3Role"/>
          <partnerLink name="PartnerLink1" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" partnerLinkType="tns:Testfile21" myRole="Testfile2PortTypeRole"/>
       </partnerLinks>
       <variables>
          <variable name="Testfile2OperationOut" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationReply"/>
          <variable name="Operation1In" xmlns:tns="http://dim.test.org/" messageType="tns:operation1"/>
          <variable name="LuizaoOut" xmlns:tns="http://dim.test.org/" messageType="tns:luizaoResponse"/>
          <variable name="LuizaoIn" xmlns:tns="http://dim.test.org/" messageType="tns:luizao"/>
          <variable name="Testfile2OperationIn" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" messageType="tns:Testfile2OperationRequest"/>
       </variables>
       <correlationSets>
          <correlationSet name="CorrelationSet1" properties="ns1:My_Property"/>
       </correlationSets>
       <sequence>
          <receive name="Receive1" createInstance="yes" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationIn">
             <correlations>
                <correlation set="CorrelationSet1" initiate="yes"/>
             </correlations>
          </receive>
          <assign name="Assign1">
             <copy>
                <from>$Testfile2OperationIn.part1/ns0:ena</from>
                <to>$LuizaoIn.parameters/ena</to>
             </copy>
             <copy>
                <from>$Testfile2OperationIn.part1/ns0:id</from>
                <to>$LuizaoIn.parameters/id</to>
             </copy>
          </assign>
          <invoke name="Invoke1" partnerLink="PartnerLink2" operation="luizao" xmlns:tns="http://dim.test.org/" portType="tns:test_service3" inputVariable="LuizaoIn" outputVariable="LuizaoOut"/>
          <receive name="Receive2" createInstance="no" partnerLink="PartnerLink3" operation="operation1" xmlns:tns="http://dim.test.org/" portType="tns:test_service2" variable="Operation1In">
             <correlations>
                <correlation set="CorrelationSet1" initiate="no"/>
             </correlations>
          </receive>
          <assign name="Assign2">
             <copy>
                <from>$Operation1In.parameters/hik</from>
                <to>$Testfile2OperationOut.part1/ns0:hik</to>
             </copy>
          </assign>
          <reply name="Reply1" partnerLink="PartnerLink1" operation="Testfile2Operation" xmlns:tns="http://j2ee.netbeans.org/wsdl/Testfile2" portType="tns:Testfile2PortType" variable="Testfile2OperationOut"/>
       </sequence>
    </process>If it's a bug,that means that i can't use second receive after invoke any more?

Maybe you are looking for

  • Import of the iTunes library to a different disk-name

    Sorry for doubleposting if a similar post has been made, couldn't find any. After buying a new computer i need to move my music. On the old computer, i got my iTunes library in my itunes folder (on drive c:) and then all my music in a different folde

  • Performance problem

    Hi, I'm having a performance problem I cannot solve, so I'm hoping anyone here has some advice. Our system consists of a central database server, and many applications (on various servers) that connect to this database. Most of these applications are

  • Asset Account mapping

    Hi, Can anyone tell me how the asset accounts are mapped to GL recon. account? Priti

  • Will there be  iOS 8 Extension for Adobe Reader application in the upcoming version

    Will Adobe reader iOS app  provide extension which would allow to edit the pdf.So that we do not need to copy the file into the reader, instead we would use extension to edit the file.

  • Problems with AD authentcation

    Hello, I am attempting to set up our first Leopard machine in one of our domains. I am having an issue logging in. Previously, in my 10.4.x installations, users from all domains could login to a computer with no problem. I've attempted to have a user