Invalid state error when using concurrent sessions in Discoverer Viewer

We are oracle 10g DB for Oracle BI Discoverer Viewer application.
We have a problem when a user logs in with the same ID on two different sessions under one machine(1 mac address).
The error message is as per below.
====================================
"The Application encountered an invalid state.
No state was found matching the state identifier provided. This can happen if your session timed out. Please start the operation again.
Indez: 10, Size:0"
====================================
The index and size varies at different times.
We suspect that the problem's caused by a confusion between the StateIDs of the two sessions. This can be replicated by modifying the querying URL; by manually changing the value of the StataID parameter.
It will be good if somebody can help us on this...
Regards
Albin Abraham

Are you using the same browser for the two sessions? I have seen instances where the user opens, say, IE, connects to Disco, and runs a worksheet. They then open another IE window, start another session, and run a different worksheet. What I believe was happening (and I'm not sure because we told the users to stop doing this) was the second browser may have tried to "reuse" the java session started by the first browser. When you went back to the first browser, it no longer had a valid session because the second browser had taken it.
To have to independent sessions, I'll start one in IE, and another in Firefox, or Netscape. This keeps the sessions from getting mixed up.
Then again, I could be wrong...

Similar Messages

  • Java Heap Error when using Stateless Session Timer Bean deployed in Oracle

    Hi,
    Am getting following Java Heap Error when using Stateless Session Timer Bean deployed in Oracle 10g AS R3 (Oracle Containers for J2EE 10g (10.1.3.0.0) (build 060119.1546.05277) ):
    06/08/02 14:58:43 javax.ejb.EJBException: java.lang.OutOfMemoryError: Java heap space
    06/08/02 14:58:43 at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:304)
    06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:67)
    06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.system.TxNotSupportedInterceptor.invoke(TxNotSupportedInterceptor.java:45)
    06/08/02 14:58:43 at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:69)
    06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:86)
    06/08/02 14:58:43 at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:71)
    06/08/02 14:58:43 at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1624)
    06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:92)
    06/08/02 14:58:43 at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:184)
    06/08/02 14:58:43 at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:819)
    06/08/02 14:58:43 at java.lang.Thread.run(Thread.java:595)
    06/08/02 14:58:43 Caused by: java.lang.OutOfMemoryError: Java heap space
    I had tried using -Xms / -Xmx options (upto 1 GB).
    The trace of exception gets delayed (from being displayed on the console) as the memory size is increased; but after sometime it starts getting displayed on the console.
    Even though this exception is displayed on the console, the Timer Bean continues to execute upto sometime before it finally crashes!
    If anyone has encountered such problem; would appreciate if you could share the solution.
    Regards, Vidyadhar

    Hi guys, I have the same problem. I have an application EAR file with two modules (EJB and WAR starting in this order). The application can schedule a process via EJB timer. In this case restarting the server I receive the error above. If I change the modules start order --> WAR - EJB the server start correctly, but the application scheduler fails (the persistency is not working) with this error:
    07/10/09 10:30:54 FINISSIMO: TimerTask.runBeanTimer java.lang.NullPointerException; nested exception is: java.lang.NullPointerExceptionjavax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
    java.lang.NullPointerException
         at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
         at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
         at java.util.ResourceBundle.getString(ResourceBundle.java:285)
         at java.util.logging.Formatter.formatMessage(Formatter.java:108)
         at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
         at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
         at java.util.logging.Logger.log(Logger.java:428)
         at java.util.logging.Logger.doLog(Logger.java:450)
         at java.util.logging.Logger.log(Logger.java:539)
         at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
         at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
         at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
         at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
         at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
         at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
         at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
         at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    javax.ejb.TransactionRolledbackLocalException: java.lang.NullPointerException; nested exception is: java.lang.NullPointerException
         at com.evermind.server.ejb.EJBUtils.getLocalUserException(EJBUtils.java:309)
         at com.evermind.server.ejb.interceptor.system.AbstractTxInterceptor.convertAndHandleMethodException(AbstractTxInterceptor.java:73)
         at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:55)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
         at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
         at com.evermind.server.ejb.StatelessSessionEJBHome.invokeTimer(StatelessSessionEJBHome.java:38)
         at com.evermind.server.ejb.EJBContainer.invokeTimer(EJBContainer.java:1714)
         at oracle.ias.container.scheduler.TimerTask.runBeanTimer(TimerTask.java:106)
         at oracle.ias.container.scheduler.TimerTask.run(TimerTask.java:220)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NullPointerException
         at java.util.ListResourceBundle.handleGetObject(ListResourceBundle.java:107)
         at java.util.ResourceBundle.getObject(ResourceBundle.java:319)
         at java.util.ResourceBundle.getString(ResourceBundle.java:285)
         at java.util.logging.Formatter.formatMessage(Formatter.java:108)
         at oracle.j2ee.util.TraceLogFormatter.format(TraceLogger.java:124)
         at oracle.j2ee.util.TraceLogger$TraceLoggerHandler.publish(TraceLogger.java:105)
         at java.util.logging.Logger.log(Logger.java:428)
         at java.util.logging.Logger.doLog(Logger.java:450)
         at java.util.logging.Logger.log(Logger.java:539)
         at oracle.ias.container.timer.TimerEntry.readObjFromBytes(TimerEntry.java:308)
         at oracle.ias.container.timer.TimerEntry.getInfo(TimerEntry.java:107)
         at oracle.ias.container.timer.Timer.getInfo(Timer.java:367)
         at oracle.ias.container.timer.EJBTimerImpl.getInfo(EJBTimerImpl.java:89)
         at com.finantix.foundation.integration.ejbtimer.EJBTimerServiceExecutorBean.ejbTimeout(EJBTimerServiceExecutorBean.java:42)
         at com.evermind.server.ejb.interceptor.joinpoint.EJBTimeoutJoinPoint.invoke(EJBTimeoutJoinPoint.java:20)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
         at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
         at com.evermind.server.ejb.interceptor.system.TxBeanManagedInterceptor.invoke(TxBeanManagedInterceptor.java:53)
         ... 9 more
    Any idea?
    Thx Auro

  • Invalide identifier error, when use subselect

    Hi all,
    I got "ORA-0094: sp.spriden_pidm invalid identifier "error when runing the following query.
    select (select t.name from
    (select rownum row_number, s.spriden_last_name name
    from spriden s
    where s.spriden_pidm = sp.spriden_pidm) t
    where t.row_number = 1) last_name
    from spriden sp
    where sp.spriden_pidm = 70105;
    Any one has an idea why this is happening?
    Thanks

    Unless I am missing something here, this looks like a straight pivot query to me.
    SQL> with my_test AS (SELECT 1 id, 'June' contact_name FROM dual UNION ALL
      2                   SELECT 1, 'Email' FROM dual UNION ALL
      3                   SELECT 1, 'Mark' FROM dual UNION ALL
      4                   SELECT 2, 'Tom' FROM dual),
      5       my_test_2 AS (SELECT 1 id, trunc(sysdate) act_date FROM dual UNION ALL
      6                     SELECT 1, trunc(sysdate-1) FROM dual UNION ALL
      7                     SELECT 2, trunc(sysdate-1) FROM dual)
      8  SELECT id, act_date,
      9         MAX(DECODE(rn, 1, contact_name)) nc1,
    10         MAX(DECODE(rn, 2, contact_name)) nc2,
    11         MAX(DECODE(rn, 3, contact_name)) nc3
    12  FROM (SELECT m.id, contact_name, act_date,
    13               ROW_NUMBER() OVER (PARTITION BY m.id
    14                                  ORDER BY contact_name) rn
    15        FROM my_test m, my_test_2 m2
    16        WHERE m.id = m2.id and
    17              m2.act_date = trunc(sysdate-1))
    18  GROUP BY id, act_date;
            ID ACT_DATE    NC1   NC2   NC3
             1 11-Sep-2008 Email June  Mark
             2 11-Sep-2008 TomAssuming that you have a known maximum number of possible values in my_test for a given id this should work. You may need to use something other than the contact_name in the order by in the row_number function if you require the values in specific columns, but given your sample data, I have no idea what that might be.
    John

  • Invalid Device Error when using Labview to comunicate with Jorway 73A

    I'm having a problem when trying to get Labview to communicate with the Jorway 73a CAMAC crate controller. Keep in mind while reading this that I'm still fairly new to both the CAMAC system and Labview. I've downloaded the drivers for the Jorway 73a off your site and run into a "Invalid device" error whenever I try to read or write from the CAMAC crate using the read or write VI's. Oddly, the initialize/clear/inhibit VI runs without error. When reading cmjwdll.c I can tell that this error occurs whenever "the device selected is not a JW 73A". Not sure why I'd be getting such an error, and only with the read/write VI's, not on the initialize/clear/inhibt one.
    Thank you for your time.

    Hi Caleb,
    You may want to contact [email protected] for this question. Looking at the driver (http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/398258c61da17663862568ab005fbcbc?OpenDocument) It states that these drivers use 32-bit dll's that only work on 95/NT and are provided by Jorway.
    Hope this helps out!
    Best Regards,
    Aaron K.
    Application Engineer
    National Instruments

  • Invalid number error when using case when

    I have table called NATIONAL_RARE_ECOSYSTEMS which has 1 column called TEST_COLUMN (data type: varchar2):
    TEST_COLUMN
    rare ecosystem
    rare
    0
    0
    (null)
    (null)
    what I want is a query which will add a column called NRE_SCORE which will give each row instance a score of 0 if it null.
    If it is 0 then score should be 0.
    If the row contains any text then score should be 1
    I have written the query:
    SELECT
    (CASE WHEN test_column is null THEN 0
    WHEN test_column = 0 THEN 0
    WHEN test_column > 0 THEN 1
    END) AS NRE_SCORE
    FROM NATIONAL_RARE_ECOSYSTEMS;
    I get the error message:
    ORA-01722: invalid number
    01722. 00000 - "invalid number"
    I think this is because on the 2nd and 3rd line I'm trying to do arithmetic on a column which is varchar2 which I know I cant do.
    How do I write a query which says: if the row contains text then give score of 1?
    I'm using oracle 11g.

    Hi,
    993451 wrote:
    I have table called NATIONAL_RARE_ECOSYSTEMS which has 1 column called TEST_COLUMN (data type: varchar2):
    TEST_COLUMN
    rare ecosystem
    rare
    0
    0
    (null)
    (null)
    what I want is a query which will add a column called NRE_SCORE which will give each row instance a score of 0 if it null.
    If it is 0 then score should be 0.
    If the row contains any text then score should be 1Any text other than '0', you mean. I assume it doesn't matter if that text happens to be all digits, such as '9876', or something with no digits, such as 'rare'.
    I have written the query:
    SELECT
    (CASE WHEN test_column is null THEN 0
    WHEN test_column = 0 THEN 0
    WHEN test_column > 0 THEN 1
    END) AS NRE_SCORE
    FROM NATIONAL_RARE_ECOSYSTEMS;
    I get the error message:
    ORA-01722: invalid number
    01722. 00000 - "invalid number"
    I think this is because on the 2nd and 3rd line I'm trying to do arithmetic on a column which is varchar2 which I know I cant do.You're actually not doing any arithmetic, but you are comparing your VARCHAR2 column to a NUMBER, so it tries to convert the string to a NUMBER, and that's why you get the ORA-01722 error.
    >
    How do I write a query which says: if the row contains text then give score of 1?
    I'm using oracle 11g.Here's one way:
    SELECT       CASE
               WHEN  NVL (test_column, '0') = '0'
               THEN  0
               ELSE  1
           END          AS nre_score
    ,       ...          -- you must want other columns, too
    FROM       national_rare_ecosystems
    ;Since you don't really care about the numeric value, don't use NUMBERs anywhere; stick with VARCHAR2s, such as '0'.
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only), and also post the results you want from that data.
    Point out where the query above is getting the wrong results, and explain, using specific examples, how you get those results from the sample data in those palces.
    See the forum FAQ {message:id=9360002}

  • Deploy Error when using Stateful Session Bean inside Webdynpro

    Hi,
    I'm trying to create a webdynpro project that uses a stateful session bean
    I have created DC's for a EJB Module project, Enterprise Application and Webdynpro component. Created the bean, built it, added it's package to the public part, added the EJB Module to the EAR project. Built the EAR project. Added the EJB Module project and Enterprise Application project as a used DC in the Webdynpro DC.
    In the Webdynpro DC I added com.sap.archive-packaging.default.update-descriptors=true in the build.properties file of the cfg directory. (using the navigator view) That resolved an error while building it.
    Deployed the Enterprise Application DC without problems.
    Tried to deploy the Webdynpro DC but I get the following error:
    Jun 16, 2008 9:40:46 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] WARNING:
    [012]Deployment finished with warning
    Settings
    SDM host : 10.64.36.74
    SDM port : 50018
    URL to deploy : file:/C:/DOCUME~1/JESCHA~1/LOCALS~1/Temp/temp59822company.nl~projempactcmp.ear
    Result
    => deployed with warning : file:/C:/DOCUME~1/JESCHA~1/LOCALS~1/Temp/temp59822company.nl~projempactcmp.ear
    Finished with warnings: development component 'projempactcmp'/'company.nl'/'local'/'20080616094022':Caught exception during application startup from SAP J2EE Engine's deploy service:java.rmi.RemoteException: Error occurred while starting application company.nl/projempactcmp and wait. Reason: Clusterwide execption: server ID 6060950:<--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='com.sap.engine.services.deploy.container.DeploymentException: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Failed implicit start for company.nl/projempejb : Unknown state(5)', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key Failed implicit start for company.nl/projempejb : Unknown state(5)', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key com.sap.engine.services.deploy.container.DeploymentException: <--Localization failed: ResourceBundle='com.sap.engine.services.deploy.DeployResourceBundle', ID='Failed implicit start for company.nl/projempejb : Unknown state(5)', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key Failed implicit start for company.nl/projempejb : Unknown state(5) (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
    Deployment exception : Got problems during deployment
    Does anyone know what this error means and how to resolve it. I searched the forum but only found errors that look like this relating to XI not to Webdynpro.......
    Thansk,
    Jeschael
    Edited by: J.V. Lebbink on Jun 17, 2008 6:52 AM

    Default is 30mts.
    This is done as a parameter in orion-ejb-jar.xml. Please look at the EJB Guide at http://otn.oracle.com/docs/products/ias/doc_library/903doc_otn/generic.903/a97677/dtdxml.htm#634197 for details
    regards
    Debu

  • Org.xml.sax.SAXException: Invalid element    error when using code in view project

    I have a SOAP (RPC style) client bundled in a jar. It uses Axis1.4.
    I have created a ADFBC model project with programmatic view & entity objects that uses this soap client for CRUD operations.
    The Model project works fine when I run the Appmodule and a standalone java tester class.
    This model project is then deployed as a library and included in a different ADF web application.
    When running this application, I get the following exception for one method.
    Has anyone faced this issue? Any idea what's going on?
    Surprisingly, "dbAttributes" -the cause of the error is not even in the User class (or any other class in the entire application)!
    I am using JDeveloper 11.1.1.5. Issue occurs in integrated wls.
    AxisFault
    faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
    faultSubcode:
    faultString: org.xml.sax.SAXException: SomeClass - dbAttributes
    faultActor:
    faultNode:
    faultDetail:
      {http://xml.apache.org/axis/}hostname:localhost.localdomain
    org.xml.sax.SAXException: Invalid element in some.package.User - dbAttributes
      at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
      at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
      at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
      at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1359)
      at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:376)
      at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:322)
      at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:226)
      at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:173)
      at javax.xml.parsers.SAXParser.parse(SAXParser.java:395)
      at org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
      at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
      at org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
      at org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
      at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
      at org.apache.axis.client.Call.invokeEngine(Call.java:2784)
      at org.apache.axis.client.Call.invoke(Call.java:2767)
      at org.apache.axis.client.Call.invoke(Call.java:2443)
      at org.apache.axis.client.Call.invoke(Call.java:2366)
      at org.apache.axis.client.Call.invoke(Call.java:1812)
      at some.package.ManagerSoapBindingStub.createUser(ManagerSoapBindingStub.java:879)
      at some.package.Proxy.createUser(Proxy.java:294)

    PROBLEM SOLVED.
    org.apache.axis.encoding.ser.BeanDeserializer.onStartChild(BeanDeserializer.java:258)
    org.xml.sax.SAXException: Invalid element in
    I think this is a very common problem, and the sad thing is there are so many forums with no answers. I was getting this error because I was using client stubs generated by wscompile instead of wsdl2java. Once i used the stubs from wsdl2java, the error vanished****. I think its because the wscompile classes do not have property descriptors for each field in the response class. an example of such descriptors would be:
            typeDesc.setXmlType(new javax.xml.namespace.QName("https://ns.ns.btu", "LoginResponseData"));
            org.apache.axis.description.ElementDesc elemField = new org.apache.axis.description.ElementDesc();
            elemField.setFieldName("sessionID");
            elemField.setXmlName(new javax.xml.namespace.QName("https://ns.ns.btu", "SessionID"));
            elemField.setXmlType(new javax.xml.namespace.QName("http://www.w3.org/2001/XMLSchema", "int"));
            elemField.setNillable(false);
            typeDesc.addFieldDesc(elemField);The wsdl2java classes do have these descriptors for each field.
    Please also look at the following links if you still having problems:
    http://marc.info/?l=axis-user&m=103705794612785&w=2
    http://www.opensubscriber.com/message/[email protected]/1877996.html

  • Invalid value error when using custom lov-window

    We generate a form with Headstart(patch12.4)/Designer 6.0. In a multi-recordblock we insert a record, selected via a custom LOV form. When changing the focus to another field, immediately we get the message
    FRM-40212: Invalid value for field OMI_ONDERDEEL_ID.
    We cannot debug, because the error seems to happen before the WHEN_VALIDATE-trigger is entered. BUT:
    When we generate the form without using the custom-LOV, everything works fine! But that is not what the user wants, because then he can only search on ID,which means nothing to him. A second (also unique) column is really what he wants to select on.
    Who can help me out?? Thanks in advance,
    Paul Wiselius.

    I hope you get a reply, I have the same problem (see about three pages back)!

  • Invalid number error when using external table

    Hello.
    I have a problem with creating an external table with number field.
    My txt file looks like:
    11111|text text|03718
    22222|text text text|04208
    33333|text|04215
    I try to create external table like:
    create table table_ex (
    id varchar2(5),
    name varchar2(100),
    old_id number(5))
    organization external (Type oracle_loader default directory dir
    access parameters(
    RECORDS DELIMITED BY NEWLINE
    fields terminated by '|'
    (id, name, old_id))
    location ('file.txt'));
    When i create the table and run select i get this in log file:
    Field Definitions for table TABLE_EX
    Record format DELIMITED BY NEWLINE
    Data in file has same endianness as the platform
    Rows with all null fields are accepted
    Fields in Data Source:
    ID CHAR (255)
    Terminated by "|"
    Trim whitespace same as SQL Loader
    NAME CHAR (255)
    Terminated by "|"
    Trim whitespace same as SQL Loader
    OLD_ID CHAR (255)
    Terminated by "|"
    Trim whitespace same as SQL Loader
    error processing column OLD_ID in row 1 for datafile
    /dir/file.txt
    ORA-01722: invalid number
    Whats the problem?
    Any idea?
    Thanks
    Message was edited by:
    DejanH

    Try this:
    create table table_ex
    id varchar2(5),
    name varchar2(100),
    old_id number
    organization external
    (Type oracle_loader default directory dir access parameters
    ( RECORDS DELIMITED BY NEWLINE fields terminated by '|'
    (id CHAR(5),
    name CHAR(100),
    old_id CHAR(5)
    location ('file.txt')
    I have removed the length of Number field and added length in characters later
    Aalap Sharma :)
    Message was edited by:
    Aalap Sharma

  • Remote handle caching error when using HTTP session replication

              Using WL 7.0 Sp2 on Solaris, deployed apllication on a 2 instance wide cluster.Code
              attached -
              unzip testapp.zip to find a test.jar which is the stateless sesion ejb and test.war
              which is the applicaiton.
              I have this class - TestDelegate that looks up a stateless session EJB(TestEJB),
              and puts the remote handle as a member variable(Test bean).Test.jsp instantiates
              this delegate(TestDelegate ), and then via setAttribute puts the TestDelegate
              in the HTTPSession.Then it calls a couple of methods via the TestDelegate which
              has the remote handle of the TestEJB.
              Scenario 1 : We deploy the WAR on cluster A which is 2 instance wide,we deploy
              the TestEJB on
              cluster B, which is also 2 instance wide. All works fine, the delegate is able
              to lookup EJB and
              can add the remote handle as a member variable.
              Scenario 2: We deploy the WAR on cluster A which is 2 instance wide,we deploy
              the TestEJB on
              cluster B, which is also 2 instance wide. This time we put a weblogic.xml in the
              WAR which has tag for in-memory session replication.This time we get class cast
              exception for the same sequence that we have above.
              <Mar 24, 2003 10:43:28 AM EST> <Error> <kernel> <000802> <ExecuteRequest failed
              java.lang.ClassCastException: Assigning instance of class com.TestEJB_1jsmq_EOImpl_WLStub
              to field com.bean.TestDelegate#bean
              Start server side stack trace:
              java.lang.ClassCastException: Assigning instance of class com.TestEJB_1jsmq_EOImpl_WLStub
              to field com.bean.TestDelegate#bean
              at java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:2266)
              at java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:514)
              at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1407)
              at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
              at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
              at java.util.Hashtable.readObject(Hashtable.java:794)
              at java.lang.reflect.Method.invoke(Native Method)
              at java.io.ObjectInputStream.invokeObjectReader(ObjectInputStream.java:2209)
              at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1406)
              at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
              at java.io.ObjectInputStream.inputClassFields(ObjectInputStream.java:2258)
              at java.io.ObjectInputStream.defaultReadObject(ObjectInputStream.java:514)
              at java.io.ObjectInputStream.inputObject(ObjectInputStream.java:1407)
              at java.io.ObjectInputStream.readObject(ObjectInputStream.java:381)
              at java.io.ObjectInputStream.readObject(ObjectInputStream.java:231)
              at weblogic.common.internal.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:140)
              at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:91)
              at weblogic.cluster.replication.ReplicationManager_WLSkel.invoke(Unknown
              Source)
              at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
              at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
              at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:821)
              at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:308)
              at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
              at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
              at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
              End server side stack trace
              [testapp.zip]
              

    To see the list of session IDs in the cache you can iterate over the keys of the cache returned from the following code:
    NamedCache cacheCatalog = CacheFactory.getReplicatedCacheService("$FilterService$").ensureCache("CoherenceSession.CATALOG", getClass().getClassLoader());Then to see the contents of a session you can take a look a the cache returned from the following code:
    String sId = // keys from cacheCatalog
    NamedCache cacheDetails = cacheCatalog.getCacheService().ensureCache(sId, getClass().getClassLoader());Hope this helps.
    We have received your request for a development license and we hould have ti out to you today.
    Later,
    Rob Misek
    Tangosol, Inc.
    Coherence: Cluster your Work. Work your Cluster.

  • "Invalid Line" error when using ttImportFromOracle -tableFile command

    Ran the command and got an error as indicated below:
    c:\oracle>ttImportFromOracle -oraConn myUser/myPassword@myDB -tableFile C:\oracle\table_list.txt
    Error: Invalid Line 'mySchema.myTable2' in file 'C:\oracle\table_list.txt'
    Use '-help' for more information
    table_list.txt looks like below, except I have 112 total tables in the list, one table per line as directed in the help documentation.
    mySchema.myTable
    mySchema.myTable1
    mySchema.myTable2
    I have tried making the table_list.txt file have only the table names (without the schema) and the same error happens.
    The invalid line is always the last table in the file. So if I remove the table it complains about, it just always complains about whichever table is last in the file.
    Can anyone tell me what I am doing wrong?
    Thanks,
    Matt

    Hi,
    This specific error message is output only in the case that an input line from the file does not contain a newline (linefeed) character within the first 96 characters. So maybe your input file is not in the right format... Perhaps it only has carriage return line endings?
    What platform are you running on and how was the input file created?
    Chris

  • Oracle giving Block corruption errors when using CDC for sending the data to SQL Server 2012

    Hello Friends,
    We are facing an error while using CDC with Oracle. It is a "Block corruption" error, which indicates at some level of data corruption. We ran RMAN validate command to scan the database for corruption but it returned with no errors, however he
    Alert Log in Oracle is still coming up with the following error. Has anyone experienced this error when using Oracle Standard Edition and SQL 2012 ?
    Trace file e:\app\pulse-ad\diag\rdbms\orcl\orcl\trace\orcl_ora_5992.trc
    Oracle Database 11g Release 11.1.0.7.0 - 64bit Production
    Windows Server 2003 Version V5.2 Service Pack 2
    CPU                 : 4 - type 8664, 4 Physical Cores
    Process Affinity    : 0x0000000000000000
    Memory (Avail/Total): Ph:6782M/24575M, Ph+PgF:12203M/30844M
    Instance name: orcl
    Redo thread mounted by this instance: 1
    Oracle process number: 151
    Windows thread id: 5992, image: ORACLE.EXE (SHAD)
    *** 2013-12-12 03:04:33.655
    *** SESSION ID:(1281.3832) 2013-12-12 03:04:33.655
    *** CLIENT ID:() 2013-12-12 03:04:33.655
    *** SERVICE NAME:(orcl) 2013-12-12 03:04:33.655
    *** MODULE NAME:(xdbcdcsvc.exe) 2013-12-12 03:04:33.655
    *** ACTION NAME:() 2013-12-12 03:04:33.655
    Lost-write detected for sequence 70856. The lost-write starts occurring in block 11193. The current block being validating is 12930.
    Block dump of the first lost-write block:
    Flag: 0x1 Format: 0x22 Block: 0x00002bb9 Seq: 0x000114bf Beg: 0x94 Cks:0x68ee
    Dump of memory from 0x0000000598D06C00 to 0x0000000598D06E00
    598D06C00 00002201 00002BB9 000114BF 68EE8094  [."...+.........h]
    598D06C10 00085BF1 0023BDA1 000DE19C 000DE19C  [.[....#.........]
    598D06C20 0000000C 00000000 2209160A 5BF10000  [..........."...[]
    598D06C30 3EB10502 00C0F5CA 0031BDA1 00010205  [...>......1.....]
    598D06C40 02B22C6A 038A6D69 00000001 00000000  [j,..im..........]
    598D06C50 4D554407 30373230 35BB0206 001100AE  [.DUM0270...5....]
    598D06C60 0001040A 000D000E 038A6D69 56B25735  [........im..5W.V]
    598D06C70 729C0003 E19C0001 000C0006 000D0006  [...r............]
    598D06C80 02BB0502 00C0F5CD 0023BDA1 000A0002  [..........#.....]
    598D06C90 00C00013 000000D0 00030201 56B25736  [............6W.V]
    598D06CA0 03890001 00000000 00000000 002E0105  [................]
    598D06CB0 FFFF0003 00C0F5CD 56B25736 3EB10003  [........6W.V...>]
    598D06CC0 FFFF0024 0014000C 000C0018 00120014  [$...............]
    598D06CD0 09CC0058 E75B0022 0009000F 00085BF1  [X...".[......[..]
    598D06CE0 0024BDA1 000DE19D 000DE19D 0000000C  [..$.............]
    598D06CF0 00000000 2309160A 5BF10000 3EB10502  [.......#...[...>]
    598D06D00 00C0F5CD 0020BDA1 00010205 02B22C72  [...... .....r,..]
    598D06D10 03900974 00000019 00000000 3030300A  [t............000]
    598D06D20 33303030 06323132 AE35BB02 0B441100  [0003212...5...D.]
    598D06D30 0001040A 000D000E 03900974 56B25736  [........t...6W.V]
    598D06D40 729C0003 E19D0011 000C0006 000D0006  [...r............]
    598D06D50 02BB0502 00C0F5CD 0024BDA1 00EA0002  [..........$.....]
    598D06D60 00270016 000001FC 00032C01 56B25736  [..'......,..6W.V]
    598D06D70 00000001 00000000 30393007 002E0105  [.........090....]
    598D06D80 FFFF0003 00C0F5CD 56B25736 00000003  [........6W.V....]
    598D06D90 FFFF0025 00140052 000C0018 00070035  [%...R.......5...]
    598D06DA0 0003000A 00070003 0001001D 00030001  [................]
    598D06DB0 00010001 00010001 00010001 00010001  [................]
    598D06DC0 00010001 00010001 00010001 00010001  [................]
    598D06DD0 00010001 00000001 00010001 00010001  [................]
    598D06DE0 00010001 00000014 09720174 00000022  [........t.r."...]
    598D06DF0 0009000F 00085BF1 0025BDA1 000DE19A  [.....[....%.....]
    Block dump of the current block being validating:
    Flag: 0x1 Format: 0x22 Block: 0x00003282 Seq: 0x000114c8 Beg: 0x0 Cks:0x312a
    Dump of memory from 0x0000000598DDFE00 to 0x0000000598DE0000
    598DDFE00 00002201 00003282 000114C8 312A8000  [."...2........*1]
    598DDFE10 50424703 31303607 34353335 69745319  [.GBP.6015354.Sti]
    598DDFE20 6E696C72 72502067 6375646F 4C207374  [rling Products L]
    598DDFE30 4E206474 C3025650 0380013D 0457454E  [td NPV..=...NEW.]
    598DDFE40 4E1E09C2 1E09C204 10C2024E 1E09C204  [...N....N.......]
    598DDFE50 09C2044E C2024E1E 03C30510 021B0929  [N....N......)...]
    598DDFE60 C3053DC3 0F192602 2602C305 C3050F19  [.=...&.....&....]
    598DDFE70 0C1A6203 5102C105 C2041F4E 044E1E09  [.b.....QN.....N.]
    598DDFE80 4E1E09C2 0410C202 4E1E09C2 1E09C204  [...N.......N....]
    598DDFE90 10C2024E 2903C305 78071B09 011D0B71  [N......)...xq...]
    598DDFEA0 BF020101 1FBF0215 4E018001 53014E01  [...........N.N.S]
    598DDFEB0 0723002C 0B0C7178 0A3C3C18 30303030  [,.#.xq...<<.0000]
    598DDFEC0 33373030 4D033337 47034255 36075042  [007373.MUB.GBP.6]
    598DDFED0 38333936 4E113331 2065776B 74616C50  [693813.Nkwe Plat]
    598DDFEE0 6D756E69 56504E20 0B0AC303 4E038001  [inum NPV.......N]
    598DDFEF0 C2045745 0459512E 59512EC2 5253C203  [EW...QY...QY..SR]
    598DDFF00 512EC204 2EC20459 C2035951 C3055253  [...QY...QY..SR..]
    598DDFF10 1B092903 0B0AC303 3C04C305 C3053239  [.).........<92..]
    598DDFF20 32393C04 4F08C305 C105114F 1F4E5102  [.<92...OO....QN.]
    598DDFF30 512EC204 2EC20459 C2035951 C2045253  [...QY...QY..SR..]
    598DDFF40 0459512E 59512EC2 5253C203 2903C305  [.QY...QY..SR...)]
    598DDFF50 78071B09 01190A71 C0030101 C0034709  [...xq........G..]
    598DDFF60 8001330A 4E014E01 002C5301 71780723  [.3...N.N.S,.#.xq]
    598DDFF70 3C180B0C 30300A3C 30303030 33373337  [...<<.0000007373]
    598DDFF80 42554D03 50424703 31304207 344C5131  [.MUB.GBP.B011QL4]
    598DDFF90 6F725020 63657073 614A2074 206E6170  [ Prospect Japan ]
    598DDFFA0 646E7546 64724F20 44535520 30302E30  [Fund Ord USD0.00]
    598DDFFB0 04C30331 03800133 0557454E 5B1603C3  [1...3...NEW....[]
    598DDFFC0 03C30521 04215B16 1F4004C3 1603C305  [!....[!...@.....]
    598DDFFD0 C305215B 215B1603 4004C304 03C3051F  [[!....[!...@....]
    598DDFFE0 031B0929 043304C3 4D245AC2 245AC204  [).....3..Z$M..Z$]
    598DDFFF0 02C3054D 040A1A18 494002C1 1603C305  [M.........@I....]
    *** 2013-12-12 03:05:07.984
    ** LOGMINER WARNING - Invalidated 6 LCRs **
    Complete dump of first invalid START LCR follows:
    ++  LCR Dump Begin: 0x0000000532C004E0 - CANNOT_SUPPORT
         op: 255, Original op: 3, baseobjn: 0, objn: 233316, objv: 1
         DF: 0x00000002, DF2: 0x00000000, MF: 0x00000000, MF2: 0x00000000
         PF: 0x40000001, PF2: 0x00002000
         MergeFlag: 0x00, FilterFlag: 0x00
         Id: 0, iotPrimaryKeyCount: 3, numChgRec: 4
         NumCrSpilled: 0
         RedoThread#: 1, rba: 0x0114c8.0001c6ce.00d4
         scn: 0x0003.56b593be, xid: 0x0008.00c.00100d85, pxid: 0x0008.00c.00100d85
         ncol: 0newcount: 0, oldcount: 0
         LUBA: 0x3.c109c0.c.15.38f64
    Thanks
    Dee

    Hi Dee,
    Thank you for your question.
    I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
    Thank you for your understanding and support.
    Regards,
    Mike Yin
    TechNet Community Support

  • Intermittent  error when using the Disco Viewer client

    Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
    “The application encountered an invalid state.
    - Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
    OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
    Any idea what this might be? Any help or direction would be very much appreciated! Thank you!

    Hello
    Is this related to a single machine or common to a single report or is it purely random?
    I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
    Just out of curiosity which version of Discoverer are you using?
    Michael

  • FSG Error when using segment override

    Hi,
    I have the following error when using segment override :
    General Ledger: Version : 12.0.0
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    RGRARG module: Financial Statement Generator
    +---------------------------------------------------------------------------+
    Current system time is 26-APR-2012 11:17:22
    +---------------------------------------------------------------------------+
    Starting Program RGRARG.
      Arguments are:
        0   RGRARG                    - RGRARG
        1   username/password         - username/password
        2   0                         - 0
        3   Y                         - Y
        4   Data Access Set ID        - 1030
        5   Chart of Accounts Id      - 101
        6   ADHOC Prefix              - FSG-ADHOC-
        7   Industry                  - C
        8   Flex Code Id              - GLLE
        9   Default Ledger ID         -
       10   Report ID                 - 1011
       11   Row Set ID                - 3461
       12   Column Set ID             - 1018
       13   Period of Interest        - SEP-11
       14   Unit of Measure ID        - IDR
       15   Rounding Option           - C
       16   Override Values           - ----DIV3---000000
       17   Content Set ID            -
       18   Row Order ID              -
       19   Report Display Set ID     -
       20   Output Option             - R
       21   Exceptions Flag           - N
       22   Miniumum Display Level    -
       23   Effective Date            -
       24   Parameter Set ID          - 1011
       25   Maximum Page Length       - 58
       26   Sub-Request Run ID        - -998
       27   Application Shortname     - SQLGL
    Message level is: Normal
    rgrini() 26-APR-2012 11:17:22 rgrini.build_per_arr:
    Query for period set name from GL_ACCESS_SETS
    SELECT  period_set_name
    FROM GL_ACCESS_SETS
    WHERE access_set_id = 1030
    rgrini.build_per_arr:
    period set name from GL_ACCESS_SETS:
    ACCOUNTING
    rgrini.build_per_arr:
    Query for period names from GL_PERIODS
    SELECT  period_name,
        to_number(to_char(end_date,'YYYYMMDD'))
    FROM GL_PERIODS
    WHERE period_set_name = :p_value
    ORDER BY NLSSORT(period_name,'NLS_SORT=BINARY') ASC
    control->report_id = 1011
    control->row_set_id = 3461
    control->column_set_id = 1018
    control->row_order_id = 0
    control->content_set_id = 0
    control->display_set_id = 0
    control->parameter_set_id = 1011
    control->resp_lvl = 0
    control->round_option = C
    control->output_option = R
    control->excp = FALSE
    control->sub_req_run_id = -998
    control->appl_id = 101
    control->id_flex_code = GLLE
    control->ldg_val_set_id = 1010673
    control->ledger_id = 0
    control->ledger_name =
    control->ledger_currency =
    control->access_set_id = 1030
    control->security_segnum = 0
    control->per_cnt = 162
    control->runtime_currency = IDR
    control->resp_id = 50386
    control->resp_appl_id = 101
    control->enforce_security = TRUE
    control->sec_rules = NULL
    control->reduced_ranges = NULL
    control->num_reduced_ranges = 0
    control->max_char_width = 1
    control->total_num_cols = 0
    control->page = NULL
    << rgrini() 26-APR-2012 11:17:22
    rgranl() 26-APR-2012 11:17:22Current date and time:  Thu Apr 26 11:17:22 2012
    rgrgsa() 26-APR-2012 11:17:22
    << rgrgsa() 26-APR-2012 11:17:22
    rgrdrs() 26-APR-2012 11:17:22req_id_str =
    809694
    rgrdpg.rgrdpg: Unable to read value for profile option RG_DEBUG_ON..
    rgrprt.rgrprt: Defaulting value for profile option RG_DEBUG_ON to FALSE..
    rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 1018
    << rgrgas() 26-APR-2012 11:17:22
    rgrgas() 26-APR-2012 11:17:22 Entering code to get axis set 3461
    << rgrgas() 26-APR-2012 11:17:23
    rgrgrp() 26-APR-2012 11:17:23
    << rgrgrp() 26-APR-2012 11:17:23
    COA Structure :
    Segment: LEDGER_SEGMENT : Ledger
    Segment: SEGMENT1 : COMPANY
    Segment: SEGMENT2 : ACCOUNT
    Segment: SEGMENT3 : PRODUCT
    Segment: SEGMENT4 : DIVISION
    Segment: SEGMENT5 : DEPOT
    Segment: SEGMENT6 : COST CENTER
    Segment: SEGMENT7 : FUTURE
    Segment value security is enforced for Financial Statement Generator reporting.
    rgrrsr() 26-APR-2012 11:17:23
    rgrrsf() 26-APR-2012 11:17:23
    << rgrrsf() 26-APR-2012 11:17:23
    << rgrcrl() 26-APR-2012 11:17:23
    << rgrrsr() 26-APR-2012 11:17:23
    rgrpsr() 26-APR-2012 11:17:23The COMPANY segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set.  All COMPANY values will be processed.
    The ACCOUNT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set.  All ACCOUNT values will be processed.
    The PRODUCT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set.  All PRODUCT values will be processed.
    The DIVISION segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set.  All DIVISION values will be processed.
    The DEPOT segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set.  All DEPOT values will be processed.
    The COST CENTER segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set.  All COST CENTER values will be processed.
    The FUTURE segment has security enabled. However, there are no security rules assigned to this responsibility for this segment, or this segment uses a dependent value set.  All FUTURE values will be processed.
    << rgrpsr() 26-APR-2012 11:17:23
    rgrdrs.rgrdrs: Getting value for profile option EXPAND_PARENT_VALUE equal No.
    PERF0005: Oracle error detected in get_def_ldgs - ORA-01403: no data found
    <x get_def_ldgs() 26-APR-2012 11:17:24
    <x get_def_ldgs() 26-APR-2012 11:17:24
    rgrgax() 26-APR-2012 11:17:24 rgrgax:get_axes
    Starting axis query.
    rgumsg:
    fdnwsc() is used by default
    rgrgax.get_conts - Prepare:
    ORA-00936: missing expression
    Current date and time:  Thu Apr 26 11:17:24 2012
    Entered sauulc with code 1 from line 3333 of file rg/lib/rgrgax.c.
    +---------------------------------------------------------------------------+
    Start of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    End of log messages from FND_FILE
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output file size:
    0I have followed the following notes but it didn't help me
    R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
    Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
    does anyone know how to solved the problem ??
    please advise
    thx

    I have followed the following notes but it didn't help me
    R12: FSG: PERF0005 Error Detected In GET_DEF_LDGS - ORA-01403: No Data Found Common Issues [ID 1368691.1]
    Generating a FSG Report Application Does Not Find Profile Values for RG_LOGFILE_DETAIL_LEVEL and EXPAND_PARENT_VALUE [ID 165339.1]
    does anyone know how to solved the problem ??If none of the docs help, please log a SR.
    Thanks,
    Hussein

  • Error when using filter on date column in interactive report

    Hi,
    I'm getting the following error when using the filter on a date column. None of the criteria in the filter list work. All give me the same error but when I use the filter on a column feature (in the search bar) and use ">" and "<" those work.
    Can someone please help me????
    " Settledate is in the last 2 years
    ORA-30175: invalid type given for an argument ORA-02063: preceding line from MAINDATA "

    I have a similar problem . I have an interactive report based on resultset stored in a collection; since all the columns of a collection are of string datatype, I convert the columns to appropriate datatypes before its returned to the user; everything works as desired except when I try to filter on a data column , I get a ORA-01858: a non-numeric character was found where a numeric was expected .
    I turned on debug mode and am copying the output here , column c009 which is aliased to 'C' is the one that I am trying to apply the filter on
    select
    ROWID as apxws_row_pk,
    "C001",
    "C002",
    "C003",
    "C004",
    "C005",
    "C006",
    "C007",
    "C008",
    "CHECKOUTTIMESTAMP",
    "C010",
    "C011",
    "TO_NUMBER(C012)",
    "TO_NUMBER(C013)",
    "TO_NUMBER(C014)",
    "C015",
    "C016",
    "C017",
    "TO_NUMBER(C018)",
    "C",
    count(*) over () as apxws_row_cnt
    from (
    select * from (
    Select c001,c002,c003,c004,c005,c006,c007,c008,to_date(c009,'dd-MON-yy HH24.MI') checkouttimestamp,
    cast(to_date(c009,'dd-MON-yy HH24.MI') as timestamp) c,
    --TO_TIMESTAMP(c009,'dd-MON-yy HH24.MI') c1 ,
    trunc(to_date(c009,'dd-MON-yy HH24.MI')) checkoutdate,
    c010,c011,to_number(c012),to_number(c013), to_number(c014),c015,c016,c017,to_number(c018) from apex_collections where collection_name = 'IR_BOOKSALES'
    ) r
    where ("C" between systimestamp - ((1/24) :APXWS_EXPR_1) and systimestamp)*
    ) r where rownum <= to_number(:APXWS_MAX_ROW_CNT)
    order by ROWID
    0.04: IR binding: ":APXWS_EXPR_1"="APXWS_EXPR_1" value="1"
    0.04: IR binding: ":APXWS_MAX_ROW_CNT"="APXWS_MAX_ROW_CNT" value="2000"
    ORA-01858: a non-numeric character was found where a numeric was expected
    I have tried to convert c009 to date, timestamp and timestamp with time zone datatypes ; they all return the same error ,but all 3 datatypes work fine with systimestamp when I run them in sqlplus. Any help would be appreciated.

Maybe you are looking for

  • How to write driver programming in smartforms

    hi Floks <i>how to write driver programmig and how many types of driver programs available to trigger smartforms what are they . how to call the url in smartforms ? help me  out  .thanking you ,</i> with regards, suresh

  • Problem with view layout

    I'm working web dynpro for ABAP trying to duplicate a legacy system screen. I have 3 different types of addresses to display on the screen - Shipping, Billing, and Mailing.  What I want to do is arrange these addresses in 3 columns.  Each column woul

  • Doubt in Database Design

    Hi, I have got some doubt in database design. I am designing a database for Inventory Management. Wherein i need to store the order details in one to many relationship. I have designed my tables as follows (Just sample) -- Tbl_OrderOne OrderCode (PK)

  • Blocked Invoice history reporting

    Hi Folks, We are currently in the process of moving to Central AP processing and a report on the history of the invoice blocking reasons is required. Our ABAPer is using the CDHDR and CDPOS as source but we have found that any invoice, manually block

  • Cannot fix error in Tomcat 5

    When I run my program at school using Tomcat 4 it works fine and everything runs properly. However, when I run that same program at home in Tomcat 5 i get an error that i don't know how to fix. I've tried everything and nothing works. Everything is e