Invalid Time result code= -2015

I'm trying to export a video file with both the video and a soundtrack I wrote for it. I go to Move/Export Audio To Movie... It almost finishes exporting, then I get the error. I have the start and end of the song in the correct positions... the video file works in the preview.. Help!

Old post, no longer curious...

Similar Messages

"Invalid time", Code "24", Encore CS3

After rendering six motion thumbnails with video clips ranging in length from 1:28 minutes to 3:27 minutes, with menu duration set to 5 minutes before looping, the burn to BD stops with the following message:
Blu-ray Object: "Shop Menu", Error: "invalid time", Code: "24", Note: "start + duration exceeds clip duration" ("Shop Menu" is the name of the menu I am trying to burn)
I cannot find any reference to Code 24 either in the manual or the help. The durations of all of the clips are shorter than than the duration set in the menu, so I can make no sense out of this error message.
Can anyone explain what is going on?
Thanks.

I was finally able to complete my menu using an apparent workaround that I found.
I first looked at the original cryptic message, "start + duration exceeds clip duration," to try to imagine what some programmer was trying to describe. I have no idea what "start" is, but I assume it is associated with some interval of time which when added to "duration" cannot exceed "clip duration." "Duration," I believe, refers to a numeric field within the menu properties that sets the running time of the menu before it loops. "Clip duration," I guessed, referred to the running time of one of the clips that run within the thumbnail windows -- probably the longest-running one, as the message suggests that it must exceed the duration of the menu (the menu duration must not exceed the duration of the clip).
I noticed something else, too. When one links an audio asset to the menu (in properties), the program automatically adjusts menu duration to exactly match the duration of the audio track. For example, my audio asset (WAV file) runs 2:47:13. When I associated it with the audio link in properties, Encore automatically adjusted the menu duration to 2:47:13 to match the audio. The audio asset, therefore, controls menu "duration."
The duration of my longest-running clip is 3:28:13, which is 19 seconds longer than the audio track in the menu (and, therefore, the menu), so "duration" does not exceed "clip duration."
This is my best guess what is meant by the error message -- and it works.
In summary, I recommend to first set your audio track duration (length) before importing to the menu. Link that to the menu properties first, before adding clips, which will trigger an auto reset of the menu duration. Then just be sure you have at least one clip running in your thumbnails that exceeds the duration of the menu audio.
I now consider this issue resolved -- at least for me.

Unable to Prepare Project for Publishing (error code -2015)

I have imported a Hi-def video from my Panasonic camera, edited it and am now trying to export it.
When I click on share ---> Export Movie ---> then click on large
I get the following error:
*Unable to prepare project for publishing*
The project could not be prepared for publishing because an error occurred. (Error code = -2015)

me no Unix expert. but -2015 reads as 'invalid time' of a movie file... whatever that means.. (?)
have you set time&date in your recording device correctly...?
have you set time&date in your Mac correctly...?
... that is only wild speculation, sorry, ... but worth a try

CS6 Timeline "Invalid Time" error

Win7 Home. All updates to CS6.
Have four timelines. No errors on Check Project. Build Blu-ray fails after sometime into the build. Get an "Adobe Encore Window" with: Blu-ray Object: "<Timeline> scrap best", Error: "Invalid Time", Code: "24", Note: "presentation composition times may not overlap". After clicking on "OK" get the "Build Program Failed" message. I can find nothing wrong with the timeline content. Any idea what this error means?

Stan,
Here are four "snips". All 4 utilize the same sequence of images (assets not slideshow). The mid row-left is the PPRO CS4 showing the chapter markers and each individual image. The top row is the resulting Encore CS4 timeline showing the individual images and chapter markers. No actual images show up since did not want to spend time locating the images. The mid row-right is the PPRO CS6 representtion of the same image sequence. Note that the "marker" window shows that encore chapter markers exist in same place as CS4. One thing different is the marker images are above the timeline ruler and seem to have in/out points. Not sure what this is for but they are chapter markers since can move forward/back using the previous/next chapter buttons. The bottom row is the resulting Encore CS6 presentation of the PPRO CS6 sequence. Note that it comes in as a "merged" video and there are no chapter markers.
The merged video I can live with for this project. Would save time; however, if the chapter markers were present. I could just manually reinsert them in Encore if necessary. By the way, I tried a different timeline story with it's "repaired" PPRO folders and it generated the folder just fine. Looks like the major problem is solved.
ABOVE = ENCORE CS4
ABOVE LEFT=PPRO CS4. RIGHT=PPRO CS6
ABOVE=ENCORE CS6

EXS 24 Logical end-of-file reached during read operation Result code = -39

EXS kit Trip Hop Remix will not completely load. Upon trying to load it I get the error, Logical end-of-file reached during read operation Result code = -39. The kit ends up lacking samples. It worked at one time but now it will not load up. To try and fix I extracted two kits with the same name but oddly they are slightly different sizes and have different creation dates, one 2004 the other 2007 hmmm (one goes in Garage band for remix tools the other gets placed in 02 Electronic Drum kits) from the install disks using Pacifist hoping to replace corrupted files. NG. I also reinstalled all the samples from the LP8 install disk, still NG. Anybody have a solution. THanks.

To further clarify, the samples are all located in the folder Garage band/.../.../.../Sampler Files/Treated Percussion Sets/Perc-DnB+Triphop. They are used in the EXS24 Trip Hop Remix kit.exs. The 3 samples that seem to be causing the error are, YT2BGLRHTX02_3ue.aif, YT2BGLRHTX03_3ue.aif, YT2BGLRHTX04_3ue.aif. The kit is useless and my song is screwed up now that the kit will not load. Any ideas for a fix out there ?

Error: Logical end-of-file reached during read operation. Result Code = -39

Hello all,
Recently, I have been suddenly getting this error message:
"Logical end-of-file reached during read operation. Result Code = -39."
In my case, when it does come up, it always pops up during the recording of an audio take. Almost immediately after hitting the stop button, this error message would pop up. And then when I go to check the take that was just recorded, there is nothing but shrieking noise. As a result, this pop up error trashes any good take I may have had. It's unpredictable as to when this error decides to pop up as well. So now, when I record, I tend to just have my fingers crossed and hope that this error doesn't pop up especially right after recording a good take!
To no avail, I have tried different I/O buffer settings, repaired permissions, rebooted, and even re-formatted my recording hard disk.
Could this be a possible hint that my hard disk is about to physically collapse? I have had it for about 2 years. Could it be some sort of bug in Logic? Or something else perhaps?
Appreciate any feedback! Thanks a lot!

DamonGrant wrote:
Thanks for those suggestions Erik...
It's been happening for a month I guess and I don't think that anything new's been installed. I will try recording to the start up disc and to maybe to some USB discs I have.
It seems to happen after working on a project for some time.
After say tracking takes for 45 mins or so. Maybe it's just coincidence, but do you think that might indicate a hardware issue?
Now there might be a clue. What happens when you then quit Logic, reboot your Mac, and reopen the active session? It might be that your disk has become a bit messy from all the traffic, and it just needs to 'settle' in OS X again. Click on the *Spotlight icon* top right of your screen and see if any indexing is taking place. Wait for it to finish before launching Logic.
Alternatively, you could exclude your recording disk from Spotlight indexing alltogether, by dragging the disk to the Privacy field in the Spotlight Sysprefpane.
One other thing to do: turn off Journaling , using *Disk Utility.* Select your recording volume in Disk Utility, hold the alt key while dropping down the File menu. Choose *Disable Journaling.*
On the other hand, it might also point to a RAM issue. Do you ever suffer Kernel panics (=the darkening 'curtain' and the message "You need to restart your Mac... etc")? or 'unexplained' crashes? If not or very rarely, I'ld rule out a RAM issue. If daily, it could be. What you can try in this case is to turn of your Mac and physically take out and reinsert your RAM.
And when you trash (=eject/unmount), physically disconnect and reconnect your recording disk? Does that help? (Logic should not be running when you do this)

Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405

Hi,
while consuming the WCF service POST method Jquery, getting error in Chrome and firefox, in IE Its working fine.
ERROR:Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405.
Jquery used to call:
$.support.cors = true
$.ajax({
type: "POST",
url: serviceURL,
data: JSON.stringify(managedProps),
useDefaultXhrHeader:false,
contentType: "application/json; charset=utf-8",
dataType: "json",
//processData: true,
crossDomain: true,
success: function (data, status, jqXHR) {
alert("sucess");
error: function (xhr) {
alert("error");
WCF sevice Web.config
<webHttpBinding>

<binding name="crossDomain" crossDomainScriptAccessEnabled="true" transferMode="StreamedResponse" />
</webHttpBinding>
</bindings>
<services>
<service name="DynamicRefinerWCF.DynamicRefiner">
<endpoint address="" behaviorConfiguration="REST" bindingConfiguration="crossDomain" binding="webHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<endpoint address="mex" binding="mexHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<host>
<baseAddresses>
<add baseAddress="http://localhost/example.svc" />
</baseAddresses>
</host>
</service>
</services>


</system.serviceModel>
<system.webServer>

<modules>
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="WebDAV" />
</handlers>
<directoryBrowse enabled="true" />
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*"/>
<add name="Access-Control-Allow-Headers" value="Content-Type"/>
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS"/>
<add name="Access-Control-Request-Headers:" value="*" />
<add name="Access-Control-Request-Method:" value="*" />
</customHeaders>
</httpProtocol>


</system.webServer>
</configuration>
Thanks,
Swathi

Right on - I have done that a number of times.

Can anyone answer why in logic pro X I keep getting a window popping up that says Directory not found, result code= -120, followed by another window saying, Fade update failed, (error -120)?

Can anyone answer, why in Logic Pro X I keep on getting a window popping up saying, Directory not found, result code = -120. Followed by another window saying, Fade update failed, (error -120)?
I am running the latest version 10.0.5 through a Macbook Pro that has just been upgraded to 16GB Ram and a 960GB SSD which has made it as fast as ****. I upgraded because I was experiencing problems before and it was suggested that I didn't have enough Ram?
I am using a Focusrite scarlett 2i4 and an Alesis Q61 midi controller. Weirdly, just trying to put a bass line down on a track using the Alesis, the bass sound goes out of tune with the track during recording only. This is very frustrating! I surely can't be the only one experiencing this?
Many thanks
Rob.

Hi
Time lost could be a problem, but.....
Sadly, I don't think that there are any Apple docs relating to networked storgae issues with Logic. Other than a 'school' or 'business' setup, NAS/OD/AD setups are not usual circumstances for audio.
If the issue is one of data backup & security, it may be enough to automatically backup the students local work folders to the NAS.
If the issue is one of the Users being able to work from any Mac and pick up their files from the server, you are not likely to resolve this problem, without copying the files to the Local Mac.
CCT

Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: 140735120521568 GPUManager 2 Sniffer Result Code: 3 Help

Today I stupidly tried to install CUDA accelerator forgetting I have Intel/AMD combo graphics card and not NVidia. Now when I try to launch AE or PremierePro I get this Last log message was: <140735120521568> <GPUManager> <2> Sniffer Result Code: 3. I have trashed the CUDA program and reinstalled Premiere and AE but no joy. Same message followed by another error box with options to Retry, Send to Apple or ignore. I have tried all 3 options but nothing works! Every time I launch either program same message appears.

Hi? today i too have this problem.
I found a solution here: https://discussions.apple.com/message/25137524#25137524
Now all good.
Good luck!

I/O Error Result Code -36

I'm trying to record a new track in an existing project, and every time a hit the record button I get an I/O Error Result Code -36. This is only happening in this particular project. If I open a new project I can record just fine. What does this mean? Any help would be greatly appreciated!

wmclow wrote:
I'm trying to record a new track in an existing project, and every time a hit the record button I get an I/O Error Result Code -36. This is only happening in this particular project. If I open a new project I can record just fine. What does this mean? Any help would be greatly appreciated!
And what audio interface and hard drive are you using?
Details... it's all in the details...

I/O Error: Result Code=-36 HELP!!!

Anyone got any idea what this is about? The problem in a nutshell is as follows...
I'm running Logic 7.2.3 on a G5 (PowerPC version) with a dedicated, built in 250gig HD for audio. Over the last week I've suddenly become aware that everything I thought was being saved to this HD is impossible to access anymore and I get the above error code coming up each time.
However, anything recorded to this HD prior to the last week still opens fine with no issues at all.
Tell me I'm being stupid and have done something ridiculous, please!!! There's a whole lot of work down the drain if that's not the case.
Any help you can offer would be greatly appreciated.
Thanks.

I have never experienced that error, but I Googled "I/O Error: Result Code=-36" and found this...
It really has nothing to do with Logic. It is a Mac OSX error being passed on
by Logic. It has to do with not being able to write to the drive. You can
get this error in Logic if your recording drive is too full, is too
fragmented, or the directory is messed up.
Some things you can do to solve the problem are: Make sure you are recording
to a drive other then the system drive, make sure you have plenty of free
space on the recording drive, repair permissions, defrag the recording
drive, or run a disk utility like Disk Warrior to check and repair directory
issues.
Hans
here is the link to that ...
http://logic-users.org/forums/LUG/thread/81375

Error Ae GPUManager 2 Sniffer Result Code: 3

Hi.
I am trying to install AE 2014 and CC error occurs each time I run the software: Error <GPUManager> <2> Sniffer Result Code: 3
I have installed it on a pc:
4770k 3.50GHz Intel I7-
32 GB ram
Asus nvidia gtx 780 (certified by adobe)
What solution do you have?
Thanks

Yes, i have.
My computer is newly installed and updated all drivers
I do not know why this problem occurs

HELP ME! "Result Code = -47"????

What is "Result Code = -47" in GarageBand 3... when trying to export song to iTunes? I can't export my songs because of this Error Code popping up.
powermac G5 Mac OS X (10.4.7) GarageBand 3

I've had the same problem, ever since installing iTunes 7.
Can only do 1 Share to iTunes from Garageband; on second time get a -47. Have to Log Out or Restart.
Repairing permission and loggin out, same result, 1 export only.
Deleting all the iTunes and GB plists, same result.
????

File not found result code = -43

For some unknown reason , Everytime I record an audio track then attempt to edit it by clicking on the sample edit tab
the window opens up I'll select Time & pitch , Already highlighting the area on the waveform that needs to fixed
with Time/Pitch I'd select any material then adjust the pitch by cents Select the Pre-Listen tab then process and paste
Then up comes File not found result code =-43 File = Logic sample clip 1
What is causing this?

Hi good idea - tried that but still getting the same messages. Any other ideas? Is driving me nuts having to press "ok" twice every time I edit a region.
If I solo the regions (not the channel) then it plays fine without the messages.
Thanks for your reply!

"Invalid Provisioning Profile. The provisioning profile included in the bundle {BUNDLENAME} [{BUNDLENAME}.app] is invalid. [Missing code-signing certificate.]" for brand new, vanilla Mac App

In OS X Maverick's XCode, I created a brand new Mac > "Cocoa Application", with Core Data and Spotlight Importerl; about as vanilla a Cocoa application I could muster.
Under Preferences > Accounts, I signed in to my Mac Developer Account.
In Targets > Identity, I set Signing to "Mac App Store", and was able to select my Mac Developer Account for "Team".
I then went to Product > Clean, and then Product > Build for... > Running, and then Produt > Archive.
In the Organizer, I select the resulting .app and click "Validate", and hit the Mac App Store radio, and hit "Next", and it's able to log into my Mac Developer Account.
I select my Provisioning Profile in the dropdown, and click "Validate".
It comes back with several errors:
1 - "Invalid Provisioning Profile. The provisioning profile included in the bundle {BUNDLENAME} [{BUNDLENAME}.app] is invalid. [Missing code-signing certificate.] For more information, visit the Mac OS Developer Portal."
2 - "The bundle identifier cannot be changed from the current value, '{DIFFERENT-BUNDLE-FROM-OTHER-PROJECT}'. If you want to change your bundle identifier, you will need to create a new application in iTunes Connect.
3 - Invalid Code Signing Entitlements. The entitlements in your app bundle signature do not match the ones that are contained in the provision profile. The bundle contains a key that is not included in the provisioning profile: 'com.apple.applications-identifier' in '{BUNDLENAME}.app/Contents/MacOS/{BUNDLENAME}'
I was able to do the same process before, for a vanilla app, before Mavericks. I'm not sure if this is a Mavericks error, or a fact that now I have multiple app projects. Particularly odd is that DIFFERENT-BUNDLE-FROM-OTHER-PROJECT in error (2) is not the same bundle name as the current project's bundle.
Would love any help you can provide! Thank you!

Seen this thread?
New codesign behavior, --deep option
"Code signing has some interesting changes in Mavericks (that apparently haven't made it into the release notes yet...). Note that this is a change to the operating system, not to the devtools."

Invalid Time result code= -2015

Similar Messages

Maybe you are looking for