Invalid times for dummy activities

Hello Gurus,
I have an integration model that is not activated and this concern the PO's & PR's. There is an error that has been identified in the queue that specifies: <b>"Invalid times for dummy activities".</b> I am not aware and not certain which is causing the System Failure with this kind of message since there is no mention of any material or PO/PR that is affecting the cancellation of the integration model. I would appreciate your assistance in the soonest possible time.
Best Regards,
Nap

Hello Srinivas,
Thanks for your assistance, the integration model that has problem was activated during the batch job run. No failure happend.
But I will take the instruction you proposed.
Thanks,
Nap

Similar Messages

Error Message - "Time Interval is not valid for dummy activities"

Friends,
I am trying to create a planned order on a resource at a plant. However it shows up an error message.
An application program called an LCA routine. The following error
occurred:
Time interval is not valid for dummy activities. Probable causes
error are an extremely long processing duration or times that li
outside the time interval (1.1.1970 + 30 sec, 1.1.2038 - 1 sec).
Could anyone help pme out with this,
Thanks in advance.
-A

Hi,
Please check the control key and activity type in routing.
Thanks,
DV

Booking time for different activities without involving costs

Hi Friends,
one of my requirement is,i need to define defferent activity types like Lunch time and driving time to capture the time for the different operations and infact it should not involve any cost related stuff,how can we acheive this in standard config.
Regards,
Srinika

Hi,
Create a work center and create various activity type like
Transport time
Waiting time for gate pass
Waiting time for PTW
Idle time in lunch etc.
Assign all the activity type to the work center.
Don't define the CO activity rate for the above activity
When you use this work center, you can refer any of these activities and book man hours with out associate cost booking.
Hope it will help!
Cheers,
Raj

SAP time for screen activities and transactions

Have a client with locations in all three US time zones as well as some European countries. Server resides in Oregon (Pacific time). A user in Europe will see the time as 9 hours earlier than it is in France. For example when it is 15:00 in France SAP shows the time as 06:00. Same issue in US but only 3 hours difference.
Client has performed a "re-direct" on the server so terminal services time does match the local time of the client but SAP appears to be looking at the time on the SAP database server.
This is causing some huge issues - anyone have a solution. Are there any plans to change this (if there is not already a solution)

Dear,
heck the below thread:
Server time Vs Client time
Time Zone Different between client users and SQL Server (Citrix EA 2.0)
Time Zone Differenz between users and SQL Server (Citrix)
Hope this will help you.
Thanks,
Neetu

When i want to create a face time it tells me to vertify my email address. When i go to do this i have to type in my apple ID and password on the Apple website, however when ever i do this i get a message saying Invalid account for this Email Address..

when i want to create a face time it tells me to vertify my email address. When i go to do this i have to type in my apple ID and password on the Apple website, however when ever i do this i get a message saying Invalid account for this Email Address..

Same problem here. Whats the deal?! Apple??

Find the Difference in time for creation of two activities for the same SR

Hi
I need to find the difference in time of cretaion of two different activities for an SR. Is there any function which I can use to get the same
For e.g.
SR # |Activity Created Date |Duration
123 12-nov
123 13 nov 1 day
Thanks in advance
Meena

There's a TIMESTAMPDIFF function.
An example from the book Oracle CRM On Demand Reporting has the following example...
TIMESTAMPDIFF( SQL_TSI_MINUTE, Activity."Start Time", Activity."End Time" )
which would return the difference in minutes.
As I type this, I'm thinking you probably know this and your problem is how to get the Activity start time for the next activity into this function. I sorry can't think of any way to do that.

Ios 6 orientation doesn't work and boot time increases. How to solve these issues for dummy? I don't understand code and strings suggested by others.

I just upgraded from ios 5 to ios 6 on my ipad2. Now orientation doesn't work properly. Boot time increase, it takes longer time to boot. Is there any configuration to solve these issues? I can't understand the explanation with code and strings found on google to solve the orientation issue. Any easy configuration for dummy ?

It supports well for ios 5. I couldn't remember (5.x.x) exactly but I always keeps update for ios5 and the abnormality starts when I upgraded to ios 6.

Report fails with " Invalid argument for database." error.

Hi All,
Several of my reports deployed on Crystal Reports Server 2008 server fails everyday with the following error.
Error in File ~tmp121c5dc747685036.rpt: Invalid argument for database.
The error is not consistent, if report A fails today, it is Report B the next day. When I reschedule the reports, they run just fine. They fail only when the daily schedules run at 2:00 AM in the morning. 100 + reports are run at this time and some of the reports that fail run many times with different parameters. Is this error due to scheduling reports many times or is it something else? Appreciate any help with this.
Thanks
Bin

Hi,
can you please check under <BOBJ installation directory>\BusinessObjects Enterprise 12.0\logging in the log files created by the crystal reports job server for additionaly error messages?
Regards,
Stratos
PS: Do you run CRS 2008 V0 or V1?

I have separate photo albums for different activities (Christmas, Rome vacation, etc. Is there a way to temporarily freeze the albums so misc. photos don't accidentally get added to that album..

I have separate photo albums for different activities (Christmas, Rome vacation, etc.) and drag respective photos in appropriate albums. As time passes, I find that I pictures from other albums accidentally added to the various albums. Is there a way to lock the album when I am done so changes can be made but only if I intentionally mean to do so?

No
What ever you drag to an album is added to it
You can suggest a feature rto Apple - iPhoto menu ==> provide iPhoto feedback
LN

Short of dismantling and recreating a page how do i find out whats causing [Error: Invalid URL for Web Content Overlay]

Hi,
i received an indesign file to include in a folio that had links to the creators desktop where they had the assets for the web content overlay. When i try to update the folio i get the error message:
"Content generation error.
[Error: Invalid URL for Web Content Overlay]"
Which is fair enough.
The problem is, i have gone through and changed all URLs that I can see, but there is one somewhere, that I just can't find.
Is there a way to get a list of all web content overlays in a particular file? otherwise i will need to recreate the whole page again, and it has some pretty complex interactions which i rather wouldn't do.
I also cannot ask the original doc creator to just change the links as i'm sure he'll have the same issues as me, at not being able to track down the erroneous link.
The problem I have with DPS is that its not very transparent. you'll have to click on everything, and into every group to see what actions are on it, which can be extremely time consuming and frustrating when complex interactions are included.
thanks in advance for any assistance

I’ve found watching the process helpful to narrow down the page.
Working off a duplicate of the file, delete one layer at a time until you figure out what layer the problem is on.
From there it’s a bit easier to narrow down.

Data services with SQL Server 2008 and Invalid time format variable

Hi all
Recently we have switched from DI on SQL Server 2005, to DS(Date Services) on SQL Server 2008. However I have faced an odd error on the query that I was running successfully in DI.
I validate my query output using a validation object to fill either Target table (if it passes), or the Target_Fail table (if it fails). Before sending data to the Target_Fail table, I map the columns using a query to the Target_Fail table. As I have a column called 'ETL_Load_Date' in that table, which I should fill it with a global variable called 'Load_Date'. I have set this global variable in the script at the very first beginning of the job. It is a data variable type:
$Load_Date = to_char(sysdate(),'YYYY.MM.DD');
When I assign this global variable to a datetime data type cloumn in my table and run the job using Data Services, I get this error:
error message for operation <SQLExecute>: <[Microsoft][ODBC SQL Server Driver]Invalid time format>.
However I didn't have this problem when I was running my job on the SQL Server 2005 using Data Integrator. The strange thing is that, when I debug this job, it runs completely successfully!!
Could you please help me to fix this problem?
Thanks for your help in advance.

Thanks for your reply.
The ETL_Date is a datetime column and the global variable is date data type. I have to use the to_char() function to be able to get just the date part of the current system datetime. Earlier I had tried date_part function but it returns int, which didn't work for me.
I found what the issue was. I don't know why there were some little squares next to the name of the global variable which I had mapped to the ETL_Date in the query object!!! The format and everything was OK, as I had the same mapping in other tables that had worked successfully.
When I deleted the column in the query object and added it again, my problem solved.

We are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient

we are a creative design studio, we need to use apple mac pro server , so we can make more than a different user to use at the same time doing different activities, on different screens, is it possible?what is the max. no. of users that can work efficient.
Appreciate your support and if possible , how to do this?

If you want to work with Mac OS X, you need one computer per simultaneous user.
What you are describing, " Multiple simultaneous logins to a single computer" is not avialable on a regular Mac of any description, unless you decide to use Unix tools instead of Mac OS X.
Server will happily store files for many, many users and provide them to multiple (up to hundreds) of computers at "near hard Drive" speeds over Gigabit Ethernet. It can make the File Sharing part easy.

Search for member activities - points are not displayed correctly

Hi experts,
I have a question concerning the search for member activities. I personalized my result list and added the field points (STRUCT.Product_ID), but there the amount of the points is always displayed as zero. When going into the details of the member activity I can see that there are points booked.
Can anyone tell me why the points in the result list are not displayed correctly?
Thanks and best regards
Anne

Sometimes threads are deleted if they violate the Rules of Engagement. If that happens, you'll lose points that were allocated to you. Othertimes, if you broke the rules, then it's possible that points that had been awarded could have been removed - but you should check your emails (of your registered address) to verify this. I'd guess, it's more likely you'd responded to a post that broke the rules.
Really important
1. Don't reply to posts that break the rules - you risk losing any points awarded and you risk wasting your time responding (which is probably more valuable).
2. Don't ignore rejection emails or other communications from moderators. They are followed up, and, if warnings are ignored, then accounts will be deleted. Recently, one poor soul's account was deleted, and they'd accrued over a 1000 points... they'd been copy and pasting from other sites and ignored moderator warnings.
matt

Invalid Time Interval error

Hi Friends,
I am loading HR data from Source. It loaded correctly without issues upto PSA and when i trigger the DTP from the PSA to the IO 0EMPLOYEE, I am getting the following error.
"0EMPLOYEE : Data record 25 ('00001028 ') : Invalid time interval '['20070731'/'20070527'] '[from/to]     RSDMD     189".
It shows about 7 entries in the error for employee 00001028.
When i check the data in PSA the from and to Values are correct.
Person           Start Date        End Date
1028              01.10.2002      26.05.2007
                      27.05.2007      31.07.2007
                      01.08.2007      31.01.2008
                      01.02.2008      29.02.2008
                      01.03.2008      27.09.2008
                      28.09.2002      31..12.2008
                      01.01.2009      31.12.9999
So, the from Data and to Date is correct yet I am getting the Invalid Time Interval error and my data load is failing.
It is happening for a all the records.
Can someone please tell me /suggets me how to resolve this issue?.
Yore help is appreciated.
Regards
BN

Hi,
Please check the note:
310304 -> DATETO/DATEFROM:Extracting time-dependent master
http://help.sap.
com/saphelp_nw70/helpdata/en/13/c3e7379899d06fe10000009b38f8cf/frameset.
htm
It should resolved your issue.
Thanks,
Venkat

Script to fix invalid characters for SharePoint synced share

I'm hoping for some help implementing a script that will rename files with characters that are invalid for SharePoint, in a synced file share that is accessed by everyone at an office.
Some background: I'm working for a small nonprofit that has a SBS 2012 server and a local domain with about 30 users. I'm the sole volunteer IT person here. We have a network file share on the server that everyone stores their documents on. Recently,
we signed up with Office 365 Online and I set up a SharePoint library and synced it with the document share on our server. A few files aren't being uploaded, though, because of invalid characters (For instance, a file like "Outline/Team plan #3.doc"
Expecting everyone to remember not to use any of the invalid characters isn't really a solution, particularly since I'm not here full-time if things go wrong. I'm looking for a script to run on the server every few minutes that will rename any incompatible
files so that they can be uploaded to SharePoint. Personally, I think it's just plain criminal that Microsoft hasn't provided this functionality itself (it's the least they could do) but that's another rant for another time. Unfortunately, while
I do have a couple of years of experience with basic server administration and group policy, I'm not experienced at all when it comes to PowerShell scripting. I can string together some command line commands in a batch file, and that's about it.
I did find this promising post here:
http://community.spiceworks.com/scripts/show/2097-fix-file-names-for-skydrive-pro-syncing
I was hoping for opinions - is this the sort of thing I'm looking for, and what would be the best way to implement it (eg, every few minutes as a scheduled event)? Also, is this a straight-up powershell script, or are there additional languages/resources
involved? (Like I said, I'm sort of a script newbie).
Additional background: I posted a similar question asking if it could be done with GPOs, and they directed me here, suggesting it could be done with scripts.
Thanks!!

That script that Mike linked to is a good one, i've used it myself a fair few times. Just to weigh in with a bit of information on why those characters are forbidden:
The reason that some characters aren't allowed is that those characters are used as special characters in URLs. If you were to allow them to go into the file names (without 'escaping' them) then all the traffic to and from SharePoint would start to
go horribly wrong.
Now it is theoretically possible to build a tool that recognises the characters, escapes them, then uploads them. As well as updating the SharePoint interface to 'unescape' the characters when it renders them. However it's not a trivial bit of engineering,
you'd have to gut SharePoint and re-do some of the core behaviour. You've then got to re-test it and make sure it doesn't break any previous SharePoint behaviour.
The way MS want you to work is to save the files directly to SharePoint, which would pick up that you have protected characters and prompt the user to correct them. That does break down a bit with OneDrive as you can use the characters locally, it's only
the next step that fails...

Invalid times for dummy activities

Similar Messages

Maybe you are looking for