Invalid Token Error in Verification Service. Received invalid token
Hi,
Actually I have deployed a cluster installation of SOA Suite following the indications available in Oracle® Application Server Enterprise Deployment Guide 10g Release 3 (10.1.3.1.0) B28939-03. I have integrated the WorkList Application with Active Directory.
I have deploy a process including a human task and added a simple task form. My problem rise when I tried to check the detail of a task in the worklist application. Sometimes worklist show the following exception
An error occured while processing your request.
Error while inoking URL to display the content. Error while invoking URL. http://myhost.com.co:7777/default/StarLoan/1.0/LoanApproval/Template1.jsp Check the underlying exception and correct the error. Contact oracle support if error is not fixable..
In the logs I can see the error
<2008-10-21 18:40:22,774> <ERROR> <default.collaxa.cube.services> <::> WorkflowService:: VerificationService.validateContext: invalid token: c9pHcmBFtc5lSM/g/slFB4MynulA3WZ5mgzsiEDn/zIU9oI97im6QwNIRJSfiG+LnWr4TAzedz3E5di50ocWbdEg+ZFrBFtBMUqFngoPHMTpMVugdIUxmLtPwZcacwzxJpeFRTQ0+dx8CO6drJlAvnvWAuB6GmzCfIoiNAVl/y3CQckD9sLAD/HWStKX7VB2TSzjVuLLH0Qmkp0eRjoXNg==
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-30503
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::>
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service.
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service. Received invalid token c9pHcmBFtc5lSM/g/slFB4MynulA3WZ5mgzsiEDn/zIU9oI97im6QwNIRJSfiG+LnWr4TAzedz3E5di50ocWbdEg+ZFrBFtBMUqFngoPHMTpMVugdIUxmLtPwZcacwzxJpeFRTQ0+dx8CO6drJlAvnvWAuB6GmzCfIoiNAVl/y3CQckD9sLAD/HWStKX7VB2TSzjVuLLH0Qmkp0eRjoXNg== in validateContext
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::>
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.workflow.verification.impl.VerificationService.validateContext(VerificationService.java:917)
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.workflow.verification.impl.VerificationService.validateContext(VerificationService.java:930)
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.workflow.verification.impl.VerificationService.getContext(VerificationService.java:541)
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.workflow.query.impl.TaskQueryService.getWorkflowContext(TaskQueryService.java:171)
<2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> at Footer1.jspService(_Footer1.java:131)
<2008-
What can I do to fix the problem?
well, no, you're not the only one. I just got the BPEL worklist app running, and I have the same error. I've deployed the app on a different server from the bpel / oc4j container, and I'm using the SOAP client. Using wireshark, I can see that the authentication is happening properly - valid requests and responses to the TaskQuery service, but after that I get:
<::> TaskQueryServiceSOAPClient: Soap Response:
<::> ORABPEL-30504
<::>
<::> Internal Error in Verification Service.
<::> Internal Error in Verification Service for user . getWorkflowContextFromElement
<::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
Similar Messages
-
OIM-SOA tasks error (Invalid Token Error in Verification Service)
Hi Guys,
I have the following environment:
wls 10.3.3, soa 11.1.13, OIM 11.1..3, OAM 11.1.1.3 with OID and OVD for LDAP store all configured to run in different Hosts according to Entreprise deployement minus the clusters using the latest jrockit.
However, as soon as everything is up and running in developmetn mode (? jrockit maybe jdk if dev mode?), logged on to the OIM admin page as xelsysadm, click on the Task tab, it fails saying that an error occured while trying to access soa. So i went and check soa under the wls concole deployments, it has a warning as its status but i understand that occurs after you have patched soa from 11.1.1.2 to 11.1.1.3. Then i looked into the soa managed server logs and i found the following stacktrace and wonder if you guys have a clue of whats really going on:
<Mar 14, 2011 10:04:06 PM WAT> <Error> <oracle.soa.services.common> <BEA-000000> <<oracle.bpel.services.common.util.EncryptionService.getKey> Received null from credential store>
<Mar 14, 2011 10:04:06 PM WAT> <Error> <oracle.soa.services.workflow.common> <BEA-000000> <<.> Unable to fetch/generate encryption key.
Unable to fetch/generate encryption key.
Check installation/post-installation steps for errors. Check for errors during SOA server startup.
ORABPEL-35012
Unable to fetch/generate encryption key.
Unable to fetch/generate encryption key.
Check installation/post-installation steps for errors. Check for errors during SOA server startup.
at oracle.bpel.services.common.util.EncryptionService.getKey(EncryptionService.java:139)
at oracle.bpel.services.common.util.EncryptionService.encrypt(EncryptionService.java:54)
at oracle.bpel.services.workflow.verification.impl.VerificationService.encryptString(VerificationService.java:2336)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createTokenFromMap(VerificationService.java:2094)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createToken(VerificationService.java:2067)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContextS(VerificationService.java:904)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:874)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:826)
at oracle.bpel.services.workflow.verification.impl.VerificationService.authenticateUser(VerificationService.java:666)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy202.authenticateUser(Unknown Source)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.authenticate(TaskQueryService.java:457)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
<Mar 14, 2011 8:58:37 PM WAT> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Invalid Token Error in Verification Service.
Invalid Token Error in Verification Service. Received invalid token in createContext.
Verify that correct token is passed.
ORABPEL-30503
Invalid Token Error in Verification Service.
Invalid Token Error in Verification Service. Received invalid token in createContext.
Verify that correct token is passed.
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:879)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:826)
at oracle.bpel.services.workflow.verification.impl.VerificationService.authenticateUser(VerificationService.java:666)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy202.authenticateUser(Unknown Source)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.authenticate(TaskQueryService.java:457)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.workflow.test.workflow.ExceptionTestCaseBuilder.invoke(ExceptionTestCaseBuilder.java:155)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy215.authenticate(Unknown Source)
at oracle.bpel.services.workflow.query.ejb.TaskQueryServiceBean.authenticate(TaskQueryServiceBean.java:80)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl.authenticate(TaskQueryService_oz1ipg_EOImpl.java:299)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: ORABPEL-35012
Unable to fetch/generate encryption key.
Unable to fetch/generate encryption key.
Check installation/post-installation steps for errors. Check for errors during SOA server startup.
at oracle.bpel.services.common.util.EncryptionService.getKey(EncryptionService.java:139)
at oracle.bpel.services.common.util.EncryptionService.encrypt(EncryptionService.java:54)
at oracle.bpel.services.workflow.verification.impl.VerificationService.encryptString(VerificationService.java:2336)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createTokenFromMap(VerificationService.java:2094)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createToken(VerificationService.java:2067)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContextS(VerificationService.java:904)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:874)
at oracle.bpel.services.workflow.verification.impl.VerificationService.createContext(VerificationService.java:826)
at oracle.bpel.services.workflow.verification.impl.VerificationService.authenticateUser(VerificationService.java:666)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy202.authenticateUser(Unknown Source)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.authenticate(TaskQueryService.java:457)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.workflow.test.workflow.ExceptionTestCaseBuilder.invoke(ExceptionTestCaseBuilder.java:155)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy215.authenticate(Unknown Source)
at oracle.bpel.services.workflow.query.ejb.TaskQueryServiceBean.authenticate(TaskQueryServiceBean.java:80)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl.authenticate(TaskQueryService_oz1ipg_EOImpl.java:299)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
Thanks in advance guys. We have tried everything from trying to map the keystores to retracing our installation but it just doesnt solve our problem.
Ta
Edited by: mocx on Mar 14, 2011 11:31 PMHi regoeng,
i too am facimg the same issue and using OID .
Can you please let me know the exact stpes followed to resoilve this issue.
Components used : UCM , SOA
Flow :
1 . User places an file/record in the content server folder in the review state.
2 . An Workflow will be intiated.
3 . It will send an mail to the approvers.
4 . The Approver will click on the link which will be sent in the mail.
5 . Provide there credentials.
6 . Approves the file/record.
7 . The file/record will be released state.
Now we are facing an issue in step 4 , where a mail is sent to the approver and when approvers click on the link it will keep on trying to open the page and in the back end we are finding the ORABPEL-35012 error.
Regards,
Karthik
Edited by: user13293564 on Aug 11, 2011 12:20 AM -
Active Directory integration: Invalid Token Error in Verification Service
I'm having problems with Active Directory integration. I'm able to browse users in the task routing slip in JDeveloper. But I'm unable to login to the worklist application.
Getting an "Invalid Token Error in Verification Service" error. Any pointers?
<2007-06-12 21:40:36,843> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Identity Service Configuration error.
<2007-06-12 21:40:36,843> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Identity Service Configuration file has error.
<2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <PCRuntimeException::<init>> Identity Service Configuration error.
<2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <PCRuntimeException::<init>> Identity Service Configuration file has error.
<2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <::> WorkflowService:: VerificationService.destroyContext: invalid token: c9pHcmBFtc4q7/EY3xGAv/6hhfa6Hf5tllCb8ZYKtdSA/8/y0exRcwpjy0vWiWGgBPzuIh5Ur+l+ZHDNe0PKb9KiFScsKAG3JK1y+nIJtC827Rljhn8E+/BoF+ZIN6GFYn/iyo/6Mrlmz02Pg4QtetftO7eHJ01rEV5MmZFTXsg8iV6LQPnkAPjqmmsq+5bVYGGfSFpHX7FXk/0FrSabClKy6DKiwt/1Kp2Ldbj2RY8=
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-30503
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service.
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service. Received invalid token c9pHcmBFtc4q7/EY3xGAv/6hhfa6Hf5tllCb8ZYKtdSA/8/y0exRcwpjy0vWiWGgBPzuIh5Ur+l+ZHDNe0PKb9KiFScsKAG3JK1y+nIJtC827Rljhn8E+/BoF+ZIN6GFYn/iyo/6Mrlmz02Pg4QtetftO7eHJ01rEV5MmZFTXsg8iV6LQPnkAPjqmmsq+5bVYGGfSFpHX7FXk/0FrSabClKy6DKiwt/1Kp2Ldbj2RY8= in destroyContext
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.workflow.verification.impl.VerificationService.destroyContext(VerificationService.java:667)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.workflow.query.impl.TaskQueryService.destroyWorkflowContext(TaskQueryService.java:161)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at worklistapp.servlets.Logout.handleRequest(Logout.java:66)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at worklistapp.servlets.BaseServlet.doGet(BaseServlet.java:142)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at java.security.AccessController.doPrivileged(Native Method)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> at java.lang.Thread.run(Thread.java:595)
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Caused by: BPEL-10555
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Identity Service Configuration error.
<2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Identity Service Configuration file has error.Hi Adina,
thank you for your answer (questions)!
We use 10.1.3.1 SOA Suite and the default jazn.com Security Provider and what we set at java.naming.security.principal property is oc4jadmin.
It is interesting, we deployed again out EAR and now it works again! There is not Invalid Token Error exception, but we didn't change almost anything...
Can we debug it somehow?
Where does this bug come from?
Thanks!
ric -
Can't login BPM workspace - Internal error in Verification Service
I've gone through "Building Your First Process with Oracle BPM 11g" in JDeveloper and was able to deploy "Hello World" successfully. My problem is that when I tried to sign in bpm workspace, I get "Invalid username and password" error. This is what I found in the soa log,
<Apr 25, 2012 9:02:49 AM EDT> <Error> <oracle.soa.services.workflow.verification> <BEA-000000> <<.> hasPermission: error: access denied (oracle.security.jps.service.policystore.PolicyStoreAccessPermission Context:APPLICATION Context Name:soa-infra Actions:getApplicationPolicy)>
<Apr 25, 2012 9:02:49 AM EDT> <Error> <oracle.soa.services.workflow.query> <BEA-000000> <<.> Internal error in Verification Service.
Internal error in Verification Service for user jcooper. hasPermission.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
ORABPEL-30504
Internal error in Verification Service.
Internal error in Verification Service for user jcooper. hasPermission.
Check the underlying exception and correct the error. If the error persists, contact Oracle Support Services.
I can't sign in workspace with anyone - weblogic, jcooper, etc. For weblogic user, I don't have any problem of login other applications. I find jcooper and bpm access in system-jazn-data.xml under $DOMAIN_HOME/config/fmwconfig directory.
I'm running out of options to try. PLEASE HELP!!!!
soa - 11.1.1.4
weblogic - 10.3.4
installed demo community users and it is installed in linux server.
Currently we are using "DefaultAuthenticator - WebLogic Authentication Provider" that has a sufficient in the control flag.Well, I'm not total sure on whether we are using LDAP or not since I'm a new to weblogic. Perhaps you can tell me. We installed webLogic 10.3.4. My understanding is that this has embedded LDAP. All I did was to install demo users and groups. So currently we have defaultAuthenticator under myrealm. so are we using LDAP in this case?
What's the exact path of Admin server?
weblogic, soa_server1, bam_server1, osb_server1 are running on one linux box. -
WAP Error Message Received invalid EAPOL-Key MIC (msg 2/4)
Hi there
can anyone help me with this error message Received invalid EAPOL-Key MIC (msg 2/4) .
Time Stamp
Severity
Service
Description
Nov 5 2012 15:11:27
warn
hostapd[4365]
Received invalid EAPOL-Key MIC (msg 2/4)
I only get this message from one device when connecting to the WLAN.
This happens only from time to time. Sometimes it connects without any problem.
Appriciate any help.
Sincerely
PatrikThis is an error when the STA (the computer) constructs the packet. 2/4 is indicate of the handshake process where it sends a nonce-value with its own MIC. A MIC is a message integrity check (or code).
Basically, this error is saying, whatever that computer is sending is invalid. You can try to make the AP behave differently such as force the use of AES instead of AES+TKIP depending on what product you have. Pretty much removing "mixed" wireless networking. As example, try using WPA2 (AES) only.
Such errors are more common using TKIP since it is the nature of TKIP to send a per-packet-key.
-Tom
Please rate helpful posts -
XML Parsing error: not well-formed (invalid token) (error code 4) --- Urgent Help Needed!
Hi all, what im doing now is im trying to create a database connection my my MS SQL 2005 database. I created a data source and went to my Adobe Lifecycle Designer 7.1, i created a new data connection, selected OLEDB and created the connection string using the build function.
Ok, now the problem is, after creating the new data connection and i click on the preview tab, i will receive the error stated above.
'XML Parsing error: not well-formed (invalid token) (error code 4), line 444, column 1 of file'
Does anyone know why am i receiving this error and how do i go about solving this?
I need this database connection to pre-fill my form when the user downloads the form =(I have a vital form that clients fill out, which is passed to many people in the company along the workflow. The form is a Planner and we have in the following PDF, Word Doc..
Well before, the Planner.pdf was originally created in Word, since most people have access to Word.. but evolved to a PDF form created from the Word Doc via Adobe LiveCycle Designer 8.0 w/ User Rights enabled so that the form could be filled out and saved using Adobe Reader.. which was a step better than Word.. being that it is free. But this needed to be easier and more to the point b/c some clients don't particularly like installing the latest version of Reader, even if you provide them the link. Nor do they like saving the form, filling the form, and attaching the form to send back.
My goal is to have the client fill an HTML version of the form, submit and be done with it, but everyone in the workflow be able to easily receive the filled Planner as a PDF form.
So some months ago I ran into this post Chris Trip, "Populate Livecycle PDF from mySQL database using PHP" #8, 22 Sep 2007 4:37 pm
which uses the command line Win32 pdftk.exe to merge an FDF file into an existing PDF on the remote server, and serve this to whoever.
My problem was with shared hosting and having the ability to use the Win32 pdftk.exe along with PHP which is predominantly used on Linux boxes. And we used a Linux box.
so i created the following unorthodox method, which a client fills the HTML version of the Planner, all field values are INSERTED into a table in MySQL DB, I and all filled planners that have been filled by clients to date can be viewed from a repository page where an XML file is served up of the corresponding client, but someone would have to have Acrobat Professional, to import the form data from the XML file into a blank form.. altoughh this is simple for me.. I have the PHP file already created so that when a Planner is filled and client submits. >> the an email is sent to me with a table row from the repository of the client name, #, email, and a link to d-load the XML file,
But I also have the PHP files created so that the Planner can be sent to by email to various people in the workflow with certain fileds ommitted they they do not need to see, but instead of the XML file beiong served up i need the filled PDF Planner to be served.
I can do this locally with ease on a testing server, but I am currently trying to use another host that uses cross-platform compatibility so i can use PHP and the pdftk.exe to achieve this, as that is why I am having to serve up an XML file b/c we use a Linux server for our website, and cant execute the exe.
Now that I am testing the other server (cross-platform host), just to use them to do the PDF handling (and it's only $5 per month) I am having problems with getting READ, WRITE, EXECUTE permissions..
Si guess a good question to ask is can PHP do the same procedure as the pdftk.exe, and i can eleminate it.
or how in the heck can i get this data from the DB into a blank PDF form, like i have described??
here are some link to reference
Populating a LiveCycle PDF with PHP and MySQL
http://www.andrewheiss.com/Tutorials?page=LiveCycle_PDFs_and_MySQL
HTML form that passed data into a PDF
http://www.mactech.com/articles/mactech/Vol.20/20.11/FillOnlinePDFFormsUsingHTML/index.htm l
and an example
http://accesspdf.com/html_pdf_form/ -
Xml parsing error: not well-formed (invalid token) (error code 4) - URGENT
Hi all, i am doing an adobe form which requires me to pre-fill my form when a user downloads the form, but 1st i need a database connection, after creating a Data Source, i opened my intereactive form and created a new data connection, but after creating a data connection and i click on the preview tab, i will receive this error:
'Xml parsing error: not well-formed (invalid token) (error code 4), line 444, column 1 of file'
It really is a headach for me, i tried many ways of creating a database connection to my MS SQL 2005 database but failed, can anyone tell me why is am i receiving this error? and can someone guide me on solving this problem?
POINTS AWARDED HANDSOMELY IF ANYONE IS WILLING TO HELP ME
Thanks in advanceHi all, i am doing an adobe form which requires me to pre-fill my form when a user downloads the form, but 1st i need a database connection, after creating a Data Source, i opened my intereactive form and created a new data connection, but after creating a data connection and i click on the preview tab, i will receive this error:
'Xml parsing error: not well-formed (invalid token) (error code 4), line 444, column 1 of file'
It really is a headach for me, i tried many ways of creating a database connection to my MS SQL 2005 database but failed, can anyone tell me why is am i receiving this error? and can someone guide me on solving this problem?
POINTS AWARDED HANDSOMELY IF ANYONE IS WILLING TO HELP ME
Thanks in advance -
I've bought an Iphone 4S in the UK. Using the phone in Argentina, it displays the "No Service" and "Invalid SIM" errors sporadically. The only solution is to reset the phone (switching it ON/OFF). Also most of the time, the SMS are not sent nor received...
The phone was checked by my carrier (phone company, Movistar) and they replaced the micro SIM card. bear in mind that there's no Apple shop here and the Iphone 4S is NOT available in Argentina!!!
Any suggestions?Dear all,
(THIS CONCERNS MTC TOUCH CUSTOMERS IN LEBANON)
I've received an email with a solution to the problem; you have to update to the new iOS 5.0.1 firmware (9A406)!! It's been 1Hour and so far my iPHone 4S is working just fine. Please follow carefully the below instructions:
RUN A FULL BACK UP BEFORE DOING ANY OF THIS
1. Download the new iOS 5.0.1 firmware (9A406) from the internet. (800MB)
2. Connect your iPhone 4S to iTunes.
3. Once connected, two options will show: ‘restore’ and ‘check for update’.
4. Press down SHIFT and choose ‘check for update’. (if you click ‘check for update’ without pressing down SHIFT doesn’t work.)
5. Select the new firmware (9A406). Note that the file should be renamed ‘iPhone4,1_5.0.1_9A406_Restore.ipsw’ (instead of ‘iPhone4,1_5.0.1_9A406_Restore.zip’), i.e. changing the file extension from ZIP to IPSW. iTunes will now work alone and update your iPhone 4S.
A full back up is recommended before firmware upgrade.
HOPE THIS HELPS -
Item Validation on a Form - Receives ORA-0094: Invalid Idenitier error
I'm fairly new to APEX and having an issue with an Item Validation on a Form receiving the ORA-0094: <Column Name>: Invalid Identifier error. I have looked at postings in this form on this error and tried many of the suggestions. I still can not get it to work. My lack of experience with APEX is not helping either.
I'm using APEX release 2.2 with IE6.
I'm trying to create a new Invoice in the Invoice table (CTS_INVOICE). The RFA Number for this invoice must be an active RFA record in the RFA table (CTS_RFA). Before I add the check for the RFA active status, I wanted to get the code that checks for the existence of the RFA record working first.
After filling in the fields on the forms, click the Create button, and receives an error page with the following error ORA-0094: "RFA_NUMBER": Invalid Identifier.
I have checked to make sure the table name, column name, and item name were correct with spelling and capitalization.
Used the Wizard to setup the Item Validation.
Type: EXISTS
Validation Expression 1: Select 1 from CTS_RFA where RFA_Number = :P25_RFA_NUMBER
Error message: Enter an active RFA number.
location: Inline with Field and in Notification
Associated Item: P25_RFA_NUMBER
Any help would be greatly appreciated.
Thanks,
VivianVivian - Might the column have been created as a quoted identifier with mixed upper/lower case characters?
Run this in SQL*Plus:
select count(rfa_number) from cts_rfa;
If that works without error then this is not the problem.
Scott -
Hi All,
We are trying to access the Create Deployment method stated below
http://msdn.microsoft.com/en-us/library/windowsazure/ee460813
We have uploaded the Package in the blob and browsing the configuration file. We have checked trying to upload manually the package and config file in Azure portal and its working
fine.
Below is the code we have written for creating deployment where "AzureEcoystemCloudService" is our cloud service name where we want to deploy our package. I have also highlighted the XML creation
part.
byte[] bytes =
new byte[fupldConfig.PostedFile.ContentLength + 1];
fupldConfig.PostedFile.InputStream.Read(bytes, 0, bytes.Length);
string a = Encoding.UTF8.GetString(bytes, 0, bytes.Length);
string base64ConfigurationFile = a.ToBase64();
X509Certificate2 certificate =
CertificateUtility.GetStoreCertificate(ConfigurationManager.AppSettings["thumbprint"].ToString());
HostedService.CreateNewDeployment(certificate,
ConfigurationManager.AppSettings["SubscriptionId"].ToString(),
"2012-03-01", "AzureEcoystemCloudService", Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot.staging,
"AzureEcoystemDeployment",
"http://shubhendustorage.blob.core.windows.net/shubhendustorage/Infosys.AzureEcoystem.Web.cspkg",
"AzureEcoystemDeployment", base64ConfigurationFile,
true, false);
<summary>
/// </summary>
/// <param name="certificate"></param>
/// <param name="subscriptionId"></param>
/// <param name="version"></param>
/// <param name="serviceName"></param>
/// <param name="deploymentSlot"></param>
/// <param name="name"></param>
/// <param name="packageUrl"></param>
/// <param name="label"></param>
/// <param name="base64Configuration"></param>
/// <param name="startDeployment"></param>
/// <param name="treatWarningsAsError"></param>
public static
void CreateNewDeployment(X509Certificate2 certificate,
string subscriptionId,
string version, string serviceName, Infosys.AzureEcosystem.Entities.Enums.DeploymentSlot deploymentSlot,
string name, string packageUrl,
string label, string base64Configuration,
bool startDeployment, bool treatWarningsAsError)
Uri uri = new
Uri(String.Format(Constants.CreateDeploymentUrlTemplate, subscriptionId, serviceName, deploymentSlot.ToString()));
XNamespace wa = Constants.xmlNamespace;
XDocument requestBody =
new XDocument();
String base64ConfigurationFile = base64Configuration;
String base64Label = label.ToBase64();
XElement xName = new
XElement(wa + "Name", name);
XElement xPackageUrl =
new XElement(wa +
"PackageUrl", packageUrl);
XElement xLabel = new
XElement(wa + "Label", base64Label);
XElement xConfiguration =
new XElement(wa +
"Configuration", base64ConfigurationFile);
XElement xStartDeployment =
new XElement(wa +
"StartDeployment", startDeployment.ToString().ToLower());
XElement xTreatWarningsAsError =
new XElement(wa +
"TreatWarningsAsError", treatWarningsAsError.ToString().ToLower());
XElement createDeployment =
new XElement(wa +
"CreateDeployment");
createDeployment.Add(xName);
createDeployment.Add(xPackageUrl);
createDeployment.Add(xLabel);
createDeployment.Add(xConfiguration);
createDeployment.Add(xStartDeployment);
createDeployment.Add(xTreatWarningsAsError);
requestBody.Add(createDeployment);
requestBody.Declaration =
new XDeclaration("1.0",
"UTF-8", "no");
XDocument responseBody;
RestApiUtility.InvokeRequest(
uri, Infosys.AzureEcosystem.Entities.Enums.RequestMethod.POST.ToString(),
HttpStatusCode.Accepted, requestBody, certificate, version,
out responseBody);
<summary>
/// A helper function to invoke a Service Management REST API operation.
/// Throws an ApplicationException on unexpected status code results.
/// </summary>
/// <param name="uri">The URI of the operation to invoke using a web request.</param>
/// <param name="method">The method of the web request, GET, PUT, POST, or DELETE.</param>
/// <param name="expectedCode">The expected status code.</param>
/// <param name="requestBody">The XML body to send with the web request. Use null to send no request body.</param>
/// <param name="responseBody">The XML body returned by the request, if any.</param>
/// <returns>The requestId returned by the operation.</returns>
public static
string InvokeRequest(
Uri uri,
string method,
HttpStatusCode expectedCode,
XDocument requestBody,
X509Certificate2 certificate,
string version,
out XDocument responseBody)
responseBody =
null;
string requestId = String.Empty;
HttpWebRequest request = (HttpWebRequest)HttpWebRequest.Create(uri);
request.Method = method;
request.Headers.Add("x-ms-Version", version);
request.ClientCertificates.Add(certificate);
request.ContentType =
"application/xml";
if (requestBody != null)
using (Stream requestStream = request.GetRequestStream())
using (StreamWriter streamWriter =
new StreamWriter(
requestStream, System.Text.UTF8Encoding.UTF8))
requestBody.Save(streamWriter,
SaveOptions.DisableFormatting);
HttpWebResponse response;
HttpStatusCode statusCode =
HttpStatusCode.Unused;
try
response = (HttpWebResponse)request.GetResponse();
catch (WebException ex)
// GetResponse throws a WebException for 4XX and 5XX status codes
response = (HttpWebResponse)ex.Response;
try
statusCode = response.StatusCode;
if (response.ContentLength > 0)
using (XmlReader reader =
XmlReader.Create(response.GetResponseStream()))
responseBody =
XDocument.Load(reader);
if (response.Headers !=
null)
requestId = response.Headers["x-ms-request-id"];
finally
response.Close();
if (!statusCode.Equals(expectedCode))
throw new
ApplicationException(string.Format(
"Call to {0} returned an error:{1}Status Code: {2} ({3}):{1}{4}",
uri.ToString(),
Environment.NewLine,
(int)statusCode,
statusCode,
responseBody.ToString(SaveOptions.OmitDuplicateNamespaces)));
return requestId;
But every time we are getting the below error from the line
response = (HttpWebResponse)request.GetResponse();
<Error xmlns="http://schemas.microsoft.com/windowsazure" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>BadRequest</Code>
<Message>The specified configuration settings for Settings are invalid. Verify that the service configuration file is a valid XML file, and that role instance counts are specified as positive integers.</Message>
</Error>
Any help is appreciated.
Thanks,
ShubhenduPlease find the request XML I have found it in debug mode
<CreateDeployment xmlns="http://schemas.microsoft.com/windowsazure">
<Name>742d0a5e-2a5d-4bd0-b4ac-dc9fa0d69610</Name>
<PackageUrl>http://shubhendustorage.blob.core.windows.net/shubhendustorage/WindowsAzure1.cspkg</PackageUrl>
<Label>QXp1cmVFY295c3RlbURlcGxveW1lbnQ=</Label>
<Configuration>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</Configuration>
<StartDeployment>true</StartDeployment>
<TreatWarningsAsError>false</TreatWarningsAsError>
</CreateDeployment>
Shubhendu G -
i have updated my phone with the new 6 IOS. Since doing this my icloud account keeps saying that verification failed and the certificate for service is invalid. Folowin this problem my phone also does not recognise my other iphone contacts so i cannot facetime or send imessage
You don't need an app. You need couple's counseling. I believe what you want to do may also be illegal in many jurisdictions.
-
Invalid http response: null - Error in SOAP sync receiver
Hi,
We are getting the following error in synchronous SOAP receiver connection.
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null
note: This inteface is working fine without error in the subsequent run.
Anyone please help me out in this...
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Inbound Message
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: invalid http response: null</SAP:AdditionalText>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>Hi Rajendra,
The same issue I am also facing in production system.
In my case the all the requests are failing after an IIS7.5 upgrade of the Application in production.
The strange thing is that except SAP rest all the applications are able to submit requests and getting proper response also.
We are using a https communication and private key certificate authentication in SAP PI.
Does it look like a PI issue or IIS upgrade is causing some issue.
Please suggest.
Thanks,
Ashish -
WHAT IS THE FIX TO THIS ERROR: XML Parsing error: not well-formed (invalid token) (error code 4)
Hello, looking to see if there's anyone out there who knows how to resolve this error from popping up when I open a previously saved adobe file with data populated inside (tax form).
The error states:
XML Parsing error: not well-formed (invalid token) (error code 4), line 16028, column 2 of file.
So when I go to open this file, THAT ERROR appears. But then allows me to view the content inside the PDF (tax form) - however it will not allow further editing - this is an issue.
This began after working and populating certain files, then transferring to a hosting site. Now when I open any PDF file from the hosting site, the error appears. Could just be coincidental however throwing that out there in case it's useful.
What causes this error & what is the fix?
Cheers!Unfortunately No. This was a tax form downloaded from IRS.gov. The PDF file has been populated and saved off. I believe the file has somehow become corrupt. Curious how to cleanse the file so it opens without issue (that error message).
Thanks for your response -
ADRMS Install on Server 2012 - Invalid credentials presented error when supplying service account.
Adding AD RMS to a 2012 Standard server. At the point where it wants a service account. I tried numerous accounts and it would give me the same error on all of them "Invalid credentials were presented. Verify the correctness of the provided
password."
I tried more and less complex passwords with no change. If I used a non-existant user name it would throw a different error so I know it's not that.
I was able to get it to take the Domain Administrator account name and password. Obviously I don't want to use that so I set the same password on a service account with no change in error.
Attepted to logon with SA on the server. Logon was successful. Attempted install logged on as service account and got message "The service account cannot be the same account used to install AD RMS. Please specify a different account".
Am I missing something?
There's no place like 127.0.0.1But to be clear, installing RMS on a Domain Controller is NOT recommended. Precisely for the reasons you found.
Enrique Saggese - Sr. Program Manager - Information Protection - Microsoft Corporation -
Recieving ORA-01722 invalid number error while creating a materialized view
Hi,
I am receiving a ORA-01722 invalid number error while creating a materialized view. when run the select statement of the view i don't get any error, but when i use the same select statement to create a materialized view i receive this error. Could any please help in resolving this error. Here is the code i am using to create a materialized view.
CREATE MATERIALIZED VIEW MV_EBS_CH_CLOSED
REFRESH FORCE ON DEMAND
AS
SELECT DISTINCT kr.request_id, org.org_unit_name,
ebs_ch_ticket_type (kr.request_id) ticket_type,
DECODE
(kr.status_code,
'CLOSED_SUCCESS', kr.last_update_date,
'IN_PROGRESS', (SELECT MAX (start_time)
FROM ebs_ch_datastore ecd1
WHERE kr.request_id = ecd1.request_id
AND workflow_step_name =
'Final BA Review and Deployment Exit Criteria')
) closed_date,
substr(krhd.visible_parameter12,1,10) siebel_start_date,
kr.creation_date itg_start_date
FROM kcrt_requests kr,
kcrt_request_types krt,
kcrt_req_header_details krhd, kcrt_request_details krd1,
(SELECT koum.user_id user_id,
DECODE (koup.org_unit_name,
'IT Implementations', 'CHS - Service Management BA',
koup.org_unit_name
) org_unit_name
FROM krsc_org_unit_members koum, krsc_org_units koup
WHERE 1 = 1
AND 'Y' = koup.enabled_flag
AND koum.org_unit_id = koup.org_unit_id
AND EXISTS (
SELECT 'X'
FROM krsc_org_units kouc
WHERE koup.org_unit_id = kouc.org_unit_id
START WITH kouc.parent_org_unit_id =
ANY (SELECT org_unit_id
FROM krsc_org_units krsc_org_units1
WHERE 'Clearinghouse' =
org_unit_name)
CONNECT BY kouc.parent_org_unit_id =
PRIOR kouc.org_unit_id)
UNION
SELECT kou.manager_id user_id,
DECODE
(kou.org_unit_name,
'IT Implementations', 'CHS - Service Management BA',
kou.org_unit_name
) org_unit_name
FROM krsc_org_units kou
WHERE 'Y' = kou.enabled_flag
START WITH kou.parent_org_unit_id =
(SELECT org_unit_id
FROM krsc_org_units krsc_org_units2
WHERE 'Clearinghouse' = org_unit_name)
CONNECT BY kou.parent_org_unit_id = PRIOR kou.org_unit_id) org
WHERE krt.request_type_id = kr.request_type_id
AND krt.request_type_name IN ('Bug Fix', 'IT Enhancement')
and kr.REQUEST_ID = krd1.request_id
and krd1.batch_number = 1
AND kr.request_id = krhd.request_id
AND org.user_id in (krd1.parameter4, krd1.parameter5, krd1.parameter7)
AND ( 'CLOSED_SUCCESS' = kr.status_code
OR 'IN_PROGRESS' = kr.status_code
AND kr.request_id IN (
SELECT request_id
FROM (SELECT DISTINCT request_id,
MAX
(start_time)
closed_date
FROM ebs_ch_datastore
WHERE 'Final BA Review and Deployment Exit Criteria' =
workflow_step_name
GROUP BY request_id))
Thanks,
Shaik MohiuddinThis error occurs when you try to create a materialized view , but if you run the sql the results are perfectly fine. Well it happend to me also and to fix this I made sure all the coulmns have the same data type which are used in joins or in where clause.
use
where
to_number(col1)=to_number(col2) and to_number(col3)=to_number(col4)
hope this helps..
Maybe you are looking for
-
I have today purchased an iPod nano (gen 6); I use Windows 7. Am trying to register my iPod but each time I submit required info I get the message "iTunes has stopped working". I have reinstalled iTunes with same result. Where do I go from here? Bria
-
Uninstall 10.4.8 nightmare = how-to
I am tired of 10% max of my Apple software working after 10.4.8 joke on my Mac mini espc. Front Row. Solution = Redneck Apple fix = Search your hd of your apple for 10.4.8 , you are looking for a file in " hd-library-receipts " as this folder holds a
-
How to sync OSXs login keychain between devices?
As iCloud does not allow to sync keychains is there another way (besides using Dropbox) to have keychains available on multiple Apple OSX ML devices? Can one use the "Documents and Data" sync function by placing the login.keychain reference file in t
-
Hi MM experts, I am getting the message "No conditions determined (no authorization for input)" when I copy my PReq to my PO. In my PReq, I have entered a price for a material for which a value has not been defined in MM-Accounting view. In my pricin
-
How to rectify blocked plug-ins
I am trying to send an E Card but no matter what site I use i get blocked plug-in message. I have downloaded the latest Adobe Flash but it hasn't fixed the problem. Any advice?