Invalid Token

I noticed when I start up xfce4, my battery monitor and networkmanager was missing. I tried to start up hal, ddbus and networkmanager and I got this:
Failed to start message bus: error in file /etc/dbus-1/system.d/Networkmanager.conf, line 72, column 14: not well-formed (invalid token)

Hi Jamie,
What version of Extension Manager do you have installed? You can get the version information of Extension Manager by going to Help > About within Extension Manager:
If it reads: 2.0.274, it is CS4 2.0
If it reads: 2.1.112, it is CS4 2.1
If you're running 2.0 please try updating to 2.1 (http://www.adobe.com/exchange/em_download/) then try installing the BrowserLab extensions.
The BrowserLab extensions require Extension Manager 2.1 for installation.
Best regards,
Corey

Similar Messages

  • SharePoint 2007 - Invalid Token Error when Generating Excel Worksheet with ItemLevelAudit

    All,
    I have the AuditLevel project located here working on a test site:
    https://msdn.microsoft.com/en-us/library/office/bb397403(v=office.12).aspx#MOSS2007ItemLevelAudit_AuditingwithSharePointServer2007
    Since I'm a site collection admin - I can access a document and go to View Audit History.
    When I click the button to Generate Excel Document - if I've viewed the document I get the following error
    since I have a ' in my name - is this due to AD or can this be fixed in code - I did run a
    Replace ' with '' in each of the page loads on any aspx pages I saw
    string s = "'";
    string escaped = s.Replace("'","''");
    '//s:si[s:t='O'Neill, Kevin']' has an invalid token.   at MS.Internal.Xml.XPath.XPathParser.CheckToken(LexKind t)
       at MS.Internal.Xml.XPath.XPathParser.ParsePredicate(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseStep(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseRelativeLocationPath(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseLocationPath(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParsePathExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseUnionExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseUnaryExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseMultiplicativeExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseAdditiveExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseRelationalExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseEqualityExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseAndExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseOrExpr(AstNode qyInput)
       at MS.Internal.Xml.XPath.XPathParser.ParseXPathExpresion(String xpathExpresion)
       at MS.Internal.Xml.XPath.QueryBuilder.Build(String query, Boolean allowVar, Boolean allowKey)
       at MS.Internal.Xml.XPath.QueryBuilder.Build(String query, Boolean& needContext)
       at System.Xml.XPath.XPathExpression.Compile(String xpath, IXmlNamespaceResolver nsResolver)
       at System.Xml.XPath.XPathNavigator.Compile(String xpath)
       at System.Xml.XmlNode.SelectSingleNode(String xpath, XmlNamespaceManager nsmgr)
       at ItemAuditing.AuditLogWorkbook.XLInsertStringIntoCell(String sheetName, String addressName, String value)
       at ItemAuditing.AuditLogWorkbook.WriteCell(String celladdress, String cellvalue)
       at ItemAuditing.AuditLogWorkbook.WriteEntry(String User, String Occurred, String Event, String Version)
       at AuditLogWorkbookHandler.<>c__DisplayClass1.<ProcessRequest>b__0() in c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\AuditLogWorkbook.ashx:line 54
       at Microsoft.SharePoint.SPSecurity.CodeToRunElevatedWrapper(Object state)
       at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2()
       at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)
       at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)
       at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode)
       at AuditLogWorkbookHandler.ProcessRequest(HttpContext context) in c:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\AuditLogWorkbook.ashx:line 30
       at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

    Hi Alan J Stewart,
    This issue may occur due to the column name in your scenario.
    Would you please change the column name: raised by column to “raised_by”, and export the list with this column, check whether the issue persists.
    I have seen similar issue that caused by the column name.
    Thanks,
    Qiao
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Qiao Wei
    TechNet Community Support

  • Using SSRS local mode, receive invalid token error when trying to export the report when running in worker thread

    We're using ASP.net with .Net 4, developing with Visual Studio 2012.  We use SSRS 2012sp1 with local reports, so exporting the report ourselves instead of using a reportviewer control (and not using the SQL Reporting service).  The reports are
    executing fine when we export the report in the main thread, but if we spawn a worker thread and run a report there we receive the following error when calling Render():
    Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
    We only receive this when running a report that uses expressions on a separate thread.  I've tried running the application pool under all the default built-in accounts (NetworkService, etc), and under admin user accounts to no avail.
    This didn't occur with the previous version of our application which used .net 3.5.

    As mentioned, we are not using the Reportviewer control, we are rendering locally.  Not certain if that would make a difference.
    Also, I had tried using all the built-in accounts.  Just for kicks I changed it to LocalSystem again, then reset IIS (see image below).  I then tried to export the report in a worker thread and received the same error.
    Here is the text from the exception:
    Microsoft.Reporting.WebForms.LocalProcessingException: An error occurred during local report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Failed to load expression host assembly. Details: Invalid token for impersonation - it cannot be duplicated.
    at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.ProcessLoadingExprHostException(ObjectType assemblyHolderObjectType, Exception e, ProcessingErrorCode errorCode)
    at Microsoft.ReportingServices.RdlExpressions.ReportRuntime.LoadCompiledCode(IExpressionHostAssemblyHolder expressionHostAssemblyHolder, Boolean includeParameters, Boolean parametersOnly, ObjectModelImpl reportObjectModel, ReportRuntimeSetup runtimeSetup)
    at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(Boolean includeParameters, Boolean parametersOnly)
    at Microsoft.ReportingServices.OnDemandProcessing.Merge.Init(ParameterInfoCollection parameters)
    at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.CreateReportInstance(OnDemandProcessingContext odpContext, OnDemandMetadata odpMetadata, ReportSnapshot reportSnapshot, Merge& odpMerge)
    at Microsoft.ReportingServices.ReportProcessing.Execution.ProcessReportOdp.Execute(OnDemandProcessingContext& odpContext)
    at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReportOdpInitial.ProcessReport(ProcessingErrorContext errorContext, ExecutionLogContext executionLogContext, UserProfileState& userProfileState)
    at Microsoft.ReportingServices.ReportProcessing.Execution.RenderReport.Execute(IRenderingExtension newRenderer)
    at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.RenderReport(IRenderingExtension newRenderer, DateTime executionTimeStamp, ProcessingContext pc, RenderingContext rc, IChunkFactory yukonCompiledDefinition)
    at Microsoft.Reporting.LocalService.CreateSnapshotAndRender(ReportProcessing repProc, IRenderingExtension renderer, ProcessingContext pc, RenderingContext rc, SubreportCallbackHandler subreportHandler, ParameterInfoCollection parameters, DatasourceCredentialsCollection credentials)
    at Microsoft.Reporting.LocalService.Render(String format, String deviceInfo, String paginationMode, Boolean allowInternalRenderers, IEnumerable dataSources, CreateAndRegisterStream createStreamCallback)
    at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
    --- End of inner exception stack trace ---
    at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, CreateAndRegisterStream createStreamCallback, Warning[]& warnings)
    at Microsoft.Reporting.WebForms.LocalReport.InternalRender(String format, Boolean allowInternalRenderers, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at Microsoft.Reporting.WebForms.LocalReport.Render(String format, String deviceInfo, PageCountMode pageCountMode, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at Microsoft.Reporting.WebForms.Report.Render(String format, String deviceInfo, String& mimeType, String& encoding, String& fileNameExtension, String[]& streams, Warning[]& warnings)
    at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams, String area)
    at IxSS.Infolinx.Report.MicrosoftInfolinxReport.ExportReport(String strFileFullyQualifiedPath, String strExportType, String strFilterDesc, Dictionary`2 extraParams)

  • LPX-00601: Invalid token in: err while trying to read data from xml

    Hey ,
    While trying to read data from xml i got err:
    LPX-00601: Invalid token in: 'path'
    the proc. i'm using to read data from the xml is:
    procedure read_xml_file_test (in_filename in varchar2)
    is
    my_dir  varchar2(20) := 'XML_DIR;
      cur_emp2 number:=0;
      l_bfile   BFILE;
      l_clob    CLOB;
      l_parser  dbms_xmlparser.Parser;
      l_doc     dbms_xmldom.DOMDocument;
      l_nl      dbms_xmldom.DOMNodeList;
      l_nl2    dbms_xmldom.DOMNodeList;
      l_n       dbms_xmldom.DOMNode; 
      l_n2     dbms_xmldom.DOMNode;
      l_temp    VARCHAR2(1000);
    v_errors        internet_clients.errors%type; 
    src_csid       NUMBER := NLS_CHARSET_ID('UTF8'); 
    dest_offset    INTEGER := 1;
    src_offset     INTEGER := 1;
    lang_context   INTEGER := dbms_lob.default_lang_ctx;
    warning        INTEGER;
    v_count       number := 0;   --total records
    v_count_s      number := 0;   -- sucsess record
    v_count_f      number := 0;   -- failed record
    v_flag varchar2(1);
    v_char2 varchar2(1);
    v_l1 VARCHAR2(255);
    v_l2 VARCHAR2(255);
    v_l3 VARCHAR2(255);
    v_l4 VARCHAR2(255);
    v_l6 VARCHAR2(255);
    BEGIN
      l_bfile := BFileName(my_dir, in_filename);
      dbms_lob.createtemporary(l_clob, cache=>FALSE);
      dbms_lob.open(l_bfile, dbms_lob.lob_readonly);
      dbms_lob.loadclobfromfile(l_clob, l_bfile, dbms_lob.getlength(l_bfile), dest_offset,src_offset, src_csid, lang_context, warning);                        
      dbms_lob.close(l_bfile);
      -- make sure implicit date conversions are performed correctly
      dbms_session.set_nls('NLS_DATE_FORMAT','''DD/MM/RR HH24:MI:SS''');   
      -- Create a parser.
      l_parser := dbms_xmlparser.newParser;
      -- Parse the document and create a new DOM document.
        dbms_xmlparser.parseClob(l_parser, l_clob);
        l_doc := dbms_xmlparser.getDocument(l_parser);
      -- Free resources associated with the CLOB and Parser now they are no longer needed.
      dbms_lob.freetemporary(l_clob);
      dbms_xmlparser.freeParser(l_parser);  
      -- Get a list of all the  nodes in the document using the XPATH syntax.
      l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');
      -- Loop through the list and create a new record in a tble collection
      -- for each  record.
      FOR cur_emp IN 0 .. dbms_xmldom.getLength(l_nl) - 1 LOOP
       l_n := dbms_xmldom.item(l_nl, cur_emp);
       cur_emp2:=0;
       loop
         v_count := v_count + 1;
         begin
        -- Use XPATH syntax to assign values to he elements of the collection.
        dbms_xslprocessor.valueOf(l_n,'L1/text()',v_l1);
        dbms_xslprocessor.valueOf(l_n,'L2/text()',v_l2);
        dbms_xslprocessor.valueOf(l_n,'L3/text()',v_l3);
        dbms_xslprocessor.valueOf(l_n,'L4/text()',v_l4);
        dbms_xslprocessor.valueOf(l_n,'L6/text()',v_l6);
            exception
      when others then 
      null;
      end;
    exit when cur_emp2=dbms_xmldom.getLength(l_nl2);
      END LOOP;
      end loop;
      -- Free any resources associated with the document now it
      -- is no longer needed.
      dbms_xmldom.freeDocument(l_doc);
      --remove file to another directory   
          --COMMIT;  -- do not use the commit if you want to run this proc. from within the search_dir_list proc , because it execute a select from tmp table dir_list which contain a "on commit delete rows"  clause.    
      /*EXCEPTION
      /*WHEN OTHERS THEN
       dbms_lob.freetemporary(l_clob);
        dbms_xmlparser.freeParser(l_parser);
       dbms_xmldom.freeDocument(l_doc);
        null;
        ROLLBACK; */
    END;While trying to execute this i got:
    ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP'
    ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 939
    ORA-06512: at "XDB.DBMS_XSLPROCESSOR", line 967
    ORA-06512: at "MARKET.READ_XML_FILE_TEST", line 51
    ORA-06512: at line 1
    i guess i mised somthing at the line
    l_nl := dbms_xslprocessor.selectNodes(dbms_xmldom.makeNode(l_doc),'soap:Envelope/soap:Body/GetFieldsNameResponse/GetFieldsNameResult/diffgr:diffgram/DataSet_FRM_GANERIC_PROP/FRM_GANERIC_PROP');i attached here part of my xml:
    <?xml version="1.0" encoding="UTF-8" ?>
    - <soap:Envelope xmlns:soap="http://www.w3.org/2003/05/soap-envelope" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    - <soap:Body>
    - <GetFieldsNameResponse xmlns="http://tempuri.org/">
    - <GetFieldsNameResult>
    - <xs:schema id="DataSet_FRM_GANERIC_PROP" xmlns="" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata">
    - <xs:element name="DataSet_FRM_GANERIC_PROP" msdata:IsDataSet="true" msdata:Locale="he-IL">
    - <xs:complexType>
    - <xs:choice minOccurs="0" maxOccurs="unbounded">
    - <xs:element name="FRM_GANERIC_PROP">
    - <xs:complexType>
    - <xs:sequence>
      </xs:sequence>
      </xs:complexType>
      </xs:element>
      </xs:choice>
      </xs:complexType>
      </xs:element>
      </xs:schema>
    - <diffgr:diffgram xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" xmlns:diffgr="urn:schemas-microsoft-com:xml-diffgram-v1">
    - <DataSet_FRM_GANERIC_PROP xmlns="">
    - <FRM_GANERIC_PROP diffgr:id="FRM_GANERIC_PROP1" msdata:rowOrder="0">
      <L1>val1</L1>
      <L2>val2</L2>
      <L3>val3</L3>
      <L4>val4</L4>
      <L6>val6</L6>
      </FRM_GANERIC_PROP>
      </DataSet_FRM_GANERIC_PROP>
      </diffgr:diffgram>
      </GetFieldsNameResult>
      </GetFieldsNameResponse>
      </soap:Body>
      </soap:Envelope>I Guess it somthing that have to do with node definition ,
    but i have tried so many combinations and none ot those worked for me.
    i'm deeply stuck here.
    What do i miss here?
    THANKS yair
    Edited by: yair_k on 02:30 14/10/2010

    Hey , after got a lot of success with the xml reading part , i wonder if you
    can help me with a problem while trying to reading that xml from a web service.
    i use a procedure as followes:
    FUNCTION read_from_web_service(in_username in varchar2 , in_password in varchar2)
      RETURN CHAR
    AS
      l_service          UTL_DBWS.service;
      l_call             UTL_DBWS.call;
      l_a_ns                     VARCHAR2(32767);
      l_wsdl_url         VARCHAR2(32767);
      l_namespace        VARCHAR2(32767);
      l_service_qname    UTL_DBWS.qname;
      l_port_qname       UTL_DBWS.qname;
      l_operation_qname  UTL_DBWS.qname;
      l_xmltype_in       SYS.XMLTYPE;
      l_xmltype_out      SYS.XMLTYPE;
      l_return           VARCHAR2(32767);
    BEGIN
      l_wsdl_url        := 'http://www.company.com/publisherService/ServiceGetpublisherTable.asmx?wsdl';
      l_namespace       := 'http://tempuri.org/';
      l_service_qname   := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTable');
      l_port_qname      := UTL_DBWS.to_qname(l_namespace, 'ServiceGetpublisherTableSoap');
      l_operation_qname := UTL_DBWS.to_qname(l_namespace, 'GetFieldsName');
      l_service := UTL_DBWS.create_service (
        wsdl_document_location => URIFACTORY.getURI(l_wsdl_url),
        service_name           => l_service_qname);
      l_call := UTL_DBWS.create_call (
        service_handle => l_service,
        port_name      => l_port_qname,
        operation_name => l_operation_qname);
      l_xmltype_in := SYS.XMLTYPE('<?xml version="1.0" encoding="utf-8"?>
        <GetFieldsName xmlns="' || l_namespace || '">
        <user>' || in_username || '</user>
        <password>'|| in_password || '</password>
        </GetFieldsName>');
      l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
                                       request     => l_xmltype_in);
      UTL_DBWS.release_call (call_handle => l_call);
      UTL_DBWS.release_service (service_handle => l_service);
      l_return := l_xmltype_out.extract('//GetFieldsName/text()').getstringVal();
       dbms_output.put_line(l_return);     
      RETURN l_return;
    END;but when i run it i got message:
    ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException: Server did not recognize the value of HTTP Header SOAPAction: .
    regarding the line:
    l_xmltype_out := UTL_DBWS.invoke(call_Handle => l_call,
    request => l_xmltype_in);
    So , i deeply stuck here!
    my web service description is:
      <?xml version="1.0" encoding="utf-8" ?>
    - <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://tempuri.org/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
    - <wsdl:types>
    - <s:schema elementFormDefault="qualified" targetNamespace="http://tempuri.org/">
    - <s:element name="GetFieldsName">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="GetFieldsNameResponse">
    - <s:complexType>
    - <s:sequence>
    - <s:element minOccurs="0" maxOccurs="1" name="GetFieldsNameResult">
    - <s:complexType>
    - <s:sequence>
      <s:element ref="s:schema" />
      <s:any />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="GetMSG_ByUser_Not_Readed">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="GetMSG_ByUser_Not_ReadedResponse">
    - <s:complexType>
    - <s:sequence>
    - <s:element minOccurs="0" maxOccurs="1" name="GetMSG_ByUser_Not_ReadedResult">
    - <s:complexType>
    - <s:sequence>
      <s:element ref="s:schema" />
      <s:any />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="SetMSG_ByUser_Not_Readed_As_Readed">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="0" maxOccurs="1" name="user" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="password" type="s:string" />
      <s:element minOccurs="0" maxOccurs="1" name="Rec_Id" type="s:string" />
      </s:sequence>
      </s:complexType>
      </s:element>
    - <s:element name="SetMSG_ByUser_Not_Readed_As_ReadedResponse">
    - <s:complexType>
    - <s:sequence>
      <s:element minOccurs="1" maxOccurs="1" name="SetMSG_ByUser_Not_Readed_As_ReadedResult" type="s:boolean" />
      </s:sequence>
      </s:complexType>
      </s:element>
      </s:schema>
      </wsdl:types>
    - <wsdl:message name="GetFieldsNameSoapIn">
      <wsdl:part name="parameters" element="tns:GetFieldsName" />
      </wsdl:message>
    - <wsdl:message name="GetFieldsNameSoapOut">
      <wsdl:part name="parameters" element="tns:GetFieldsNameResponse" />
      </wsdl:message>
    - <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapIn">
      <wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_Readed" />
      </wsdl:message>
    - <wsdl:message name="GetMSG_ByUser_Not_ReadedSoapOut">
      <wsdl:part name="parameters" element="tns:GetMSG_ByUser_Not_ReadedResponse" />
      </wsdl:message>
    - <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapIn">
      <wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_Readed" />
      </wsdl:message>
    - <wsdl:message name="SetMSG_ByUser_Not_Readed_As_ReadedSoapOut">
      <wsdl:part name="parameters" element="tns:SetMSG_ByUser_Not_Readed_As_ReadedResponse" />
      </wsdl:message>
    - <wsdl:portType name="ServiceGetpublisherTableSoap">
    - <wsdl:operation name="GetFieldsName">
      <wsdl:input message="tns:GetFieldsNameSoapIn" />
      <wsdl:output message="tns:GetFieldsNameSoapOut" />
      </wsdl:operation>
    - <wsdl:operation name="GetMSG_ByUser_Not_Readed">
      <wsdl:input message="tns:GetMSG_ByUser_Not_ReadedSoapIn" />
      <wsdl:output message="tns:GetMSG_ByUser_Not_ReadedSoapOut" />
      </wsdl:operation>
    - <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
      <wsdl:input message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapIn" />
      <wsdl:output message="tns:SetMSG_ByUser_Not_Readed_As_ReadedSoapOut" />
      </wsdl:operation>
      </wsdl:portType>
    - <wsdl:binding name="ServiceGetpublisherTableSoap" type="tns:ServiceGetpublisherTableSoap">
      <soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="GetFieldsName">
      <soap:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="GetMSG_ByUser_Not_Readed">
      <soap:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
      <soap:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
    - <wsdl:input>
      <soap:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:binding name="ServiceGetpublisherTableSoap12" type="tns:ServiceGetpublisherTableSoap">
      <soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
    - <wsdl:operation name="GetFieldsName">
      <soap12:operation soapAction="http://tempuri.org/GetFieldsName" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="GetMSG_ByUser_Not_Readed">
      <soap12:operation soapAction="http://tempuri.org/GetMSG_ByUser_Not_Readed" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
    - <wsdl:operation name="SetMSG_ByUser_Not_Readed_As_Readed">
      <soap12:operation soapAction="http://tempuri.org/SetMSG_ByUser_Not_Readed_As_Readed" style="document" />
    - <wsdl:input>
      <soap12:body use="literal" />
      </wsdl:input>
    - <wsdl:output>
      <soap12:body use="literal" />
      </wsdl:output>
      </wsdl:operation>
      </wsdl:binding>
    - <wsdl:service name="ServiceGetpublisherTable">
    - <wsdl:port name="ServiceGetpublisherTableSoap" binding="tns:ServiceGetpublisherTableSoap">
      <soap:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
      </wsdl:port>
    - <wsdl:port name="ServiceGetpublisherTableSoap12" binding="tns:ServiceGetpublisherTableSoap12">
      <soap12:address location="http://www.company.com/publisherService/ServiceGetpublisherTable.asmx" />
      </wsdl:port>
      </wsdl:service>
      </wsdl:definitions>also i have to mention that i have changed publisher references inside the code , and i also canot
    supply username and password , so i guess you canot test it. still i not shure if my definitions (namespace est.) inside my code defined correctly.
    hope you can help me with this.
    regards
    yair

  • Active Directory integration: Invalid Token Error in Verification Service

    I'm having problems with Active Directory integration. I'm able to browse users in the task routing slip in JDeveloper. But I'm unable to login to the worklist application.
    Getting an "Invalid Token Error in Verification Service" error. Any pointers?
    <2007-06-12 21:40:36,843> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Identity Service Configuration error.
    <2007-06-12 21:40:36,843> <ERROR> <default.collaxa.cube.services> <PCException::<init>> Identity Service Configuration file has error.
    <2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <PCRuntimeException::<init>> Identity Service Configuration error.
    <2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <PCRuntimeException::<init>> Identity Service Configuration file has error.
    <2007-06-12 21:40:36,859> <ERROR> <default.collaxa.cube.services> <::> WorkflowService:: VerificationService.destroyContext: invalid token: c9pHcmBFtc4q7/EY3xGAv/6hhfa6Hf5tllCb8ZYKtdSA/8/y0exRcwpjy0vWiWGgBPzuIh5Ur+l+ZHDNe0PKb9KiFScsKAG3JK1y+nIJtC827Rljhn8E+/BoF+ZIN6GFYn/iyo/6Mrlmz02Pg4QtetftO7eHJ01rEV5MmZFTXsg8iV6LQPnkAPjqmmsq+5bVYGGfSFpHX7FXk/0FrSabClKy6DKiwt/1Kp2Ldbj2RY8=
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-30503
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service.
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service. Received invalid token c9pHcmBFtc4q7/EY3xGAv/6hhfa6Hf5tllCb8ZYKtdSA/8/y0exRcwpjy0vWiWGgBPzuIh5Ur+l+ZHDNe0PKb9KiFScsKAG3JK1y+nIJtC827Rljhn8E+/BoF+ZIN6GFYn/iyo/6Mrlmz02Pg4QtetftO7eHJ01rEV5MmZFTXsg8iV6LQPnkAPjqmmsq+5bVYGGfSFpHX7FXk/0FrSabClKy6DKiwt/1Kp2Ldbj2RY8= in destroyContext
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.bpel.services.workflow.verification.impl.VerificationService.destroyContext(VerificationService.java:667)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.bpel.services.workflow.query.impl.TaskQueryService.destroyWorkflowContext(TaskQueryService.java:161)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at worklistapp.servlets.Logout.handleRequest(Logout.java:66)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at worklistapp.servlets.BaseServlet.doGet(BaseServlet.java:142)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:396)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at java.security.AccessController.doPrivileged(Native Method)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:410)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>      at java.lang.Thread.run(Thread.java:595)
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Caused by: BPEL-10555
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::>
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Identity Service Configuration error.
    <2007-06-12 21:40:36,890> <ERROR> <default.collaxa.cube.services> <::> Identity Service Configuration file has error.

    Hi Adina,
    thank you for your answer (questions)!
    We use 10.1.3.1 SOA Suite and the default jazn.com Security Provider and what we set at java.naming.security.principal property is oc4jadmin.
    It is interesting, we deployed again out EAR and now it works again! There is not Invalid Token Error exception, but we didn't change almost anything...
    Can we debug it somehow?
    Where does this bug come from?
    Thanks!
    ric

  • Invalid Token while viewing Slide Show Component in Design Mode

    Hi Guys,
    I am having an issue where my SWF files that appear in a slide show component are displaying an invalid token error while in design mode in Xcelsius.  When I export the SWF file to Infoview, this error flashes on the screen for a second before the logon token is passed and the child SWF is loaded.
    I am trying to find a way to solve my issue so the invalid token error message does not appear and therefore does not get flashed to the user before the file actually loads.
    I downloaded Fix Pack 1 for SP3 because there was a line in the fixed issues detailing:
    "An Invalid logon token message appeared in Infoview when you viewed Flash objects (SWF files) that contain a QaaWS or Live Office connection."
    "This issue has been resolved".
    It is still happening even with FP 1 installed.
    Has anyone ever encountered this issue before and found a solution for it.
    Thanks in advance!!
    - Anthony

    Ok, I found out it has definitively something to do with the "Design mode could not load swiz-framework-1.0.0-RC1.swc. It may be incompatible with this SDK, or invalid. (DesignAssetLoader.CompleteTimeout)" warning. This somehow affects the loading of the mx:Image.
    Recompiling the SWC might work with the swiz swc, but there are more swc's giving this error like the google maps swc which does not have the source avalable freely.
    This is a real pain as I like to use a mockup image in Design Mode to place components exactly as provided by the design team.

  • Invalid Token Error in Verification Service. Received invalid token

    Hi,
    Actually I have deployed a cluster installation of SOA Suite following the indications available in Oracle® Application Server Enterprise Deployment Guide 10g Release 3 (10.1.3.1.0) B28939-03. I have integrated the WorkList Application with Active Directory.
    I have deploy a process including a human task and added a simple task form. My problem rise when I tried to check the detail of a task in the worklist application. Sometimes worklist show the following exception
    An error occured while processing your request.
    Error while inoking URL to display the content. Error while invoking URL. http://myhost.com.co:7777/default/StarLoan/1.0/LoanApproval/Template1.jsp Check the underlying exception and correct the error. Contact oracle support if error is not fixable..
    In the logs I can see the error
    <2008-10-21 18:40:22,774> <ERROR> <default.collaxa.cube.services> <::> WorkflowService:: VerificationService.validateContext: invalid token: c9pHcmBFtc5lSM/g/slFB4MynulA3WZ5mgzsiEDn/zIU9oI97im6QwNIRJSfiG+LnWr4TAzedz3E5di50ocWbdEg+ZFrBFtBMUqFngoPHMTpMVugdIUxmLtPwZcacwzxJpeFRTQ0+dx8CO6drJlAvnvWAuB6GmzCfIoiNAVl/y3CQckD9sLAD/HWStKX7VB2TSzjVuLLH0Qmkp0eRjoXNg==
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-30503
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::>
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service.
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> Invalid Token Error in Verification Service. Received invalid token c9pHcmBFtc5lSM/g/slFB4MynulA3WZ5mgzsiEDn/zIU9oI97im6QwNIRJSfiG+LnWr4TAzedz3E5di50ocWbdEg+ZFrBFtBMUqFngoPHMTpMVugdIUxmLtPwZcacwzxJpeFRTQ0+dx8CO6drJlAvnvWAuB6GmzCfIoiNAVl/y3CQckD9sLAD/HWStKX7VB2TSzjVuLLH0Qmkp0eRjoXNg== in validateContext
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::>
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::>      at oracle.bpel.services.workflow.verification.impl.VerificationService.validateContext(VerificationService.java:917)
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::>      at oracle.bpel.services.workflow.verification.impl.VerificationService.validateContext(VerificationService.java:930)
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::>      at oracle.bpel.services.workflow.verification.impl.VerificationService.getContext(VerificationService.java:541)
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::>      at oracle.bpel.services.workflow.query.impl.TaskQueryService.getWorkflowContext(TaskQueryService.java:171)
    <2008-10-21 18:40:22,775> <ERROR> <default.collaxa.cube.services> <::>      at Footer1.jspService(_Footer1.java:131)
    <2008-
    What can I do to fix the problem?

    well, no, you're not the only one. I just got the BPEL worklist app running, and I have the same error. I've deployed the app on a different server from the bpel / oc4j container, and I'm using the SOAP client. Using wireshark, I can see that the authentication is happening properly - valid requests and responses to the TaskQuery service, but after that I get:
    <::> TaskQueryServiceSOAPClient: Soap Response:
    <::> ORABPEL-30504
    <::>
    <::> Internal Error in Verification Service.
    <::> Internal Error in Verification Service for user . getWorkflowContextFromElement
    <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.

  • LPX-00601: Invalid token Error in DBMS_XSLPROCESSOR

    Hi All,
    I am using DBMS_XMLDOM and DBMS_XSLPROCESSOR to parse the XML file.
    the following code was working fine in Release 10.1.0.4.0
    l_n :=DBMS_XSLPROCESSOR.selectsinglenode
    (xmldom.makenode (doc)
    ,'/tmf:MTOSI_InventoryData/tmf:mdList/tmf:md/tmf:tlList/tmf:tlInv/tmf:tlNm');
    v_mux_id :=DBMS_XMLDOM.getnodevalue(DBMS_XMLDOM.getfirstchild (l_n));
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - 64bi
    PL/SQL Release 10.1.0.4.0 - Production
    CORE 10.1.0.4.0 Production
    TNS for Solaris: Version 10.1.0.4.0 - Production
    NLSRTL Version 10.1.0.4.0 - Production
    But we have copied the same code in Release 10.2.0.2.0 i am getting the following error Plese do the needful
    11:42:03 AM ORA-31011: XML parsing failed
    11:42:03 AM : Error occurred in XML processing
    11:42:03 AM LPX-00601: Invalid token in: '/tmf:MTOSI_InventoryData/tmf:mdList/tmf:md/tmf:tlList/tmf:tlInv/tmf:tlNm'
    11:42:03 AM ORA-06512: at line 9
    11:42:03 AM *** Script stopped due to error ***
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bi
    PL/SQL Release 10.2.0.2.0 - Production
    CORE 10.2.0.2.0 Production
    TNS for Solaris: Version 10.2.0.2.0 - Production
    NLSRTL Version 10.2.0.2.0 - Production
    Plese do the needful
    Thanks in Advance
    Elan

    FUNCTION SELECTSINGLENODE RETURNS RECORD
    Argument Name       Type                 In/Out Default?
       ID                          RAW(13)           OUT
       N                           RECORD           IN
       ID                          RAW(13)            IN
    PATTERN                VARCHAR2        IN
    NAMESPACE          VARCHAR2        IN     DEFAULTYou need to provide the namespace prefix mapping for the prefixes tmf via the NAMESPACE parameter (eg 'xmlns:tmf="xxxxxx"'

  • "LPX-00601: Invalid token in:" when retrieving namespaced attribute

    I'm trying to retrieve an attribute value from an XML document as follows:
    declare
       l_url varchar2(500);
       l_xml xmltype;
    begin
       l_xml := xmltype('<WMT_MS_Capabilities version="1.1.1">
                          <Capability>
                             <Layer>
                               <Layer>
                                  <Style>
                                    <Name>default</Name>
                                    <Title>default</Title>
                                    <LegendURL width="233" height="141">
                                       <Format>image/png</Format>
                                       <OnlineResource xmlns:xlink="http://www.w3.org/1999/xlink"
                                                       xlink:type="simple"
                                                       xlink:href="http://very_long_url"/>
                                    </LegendURL>
                                  </Style>
                              </Layer>
                              </Layer>
                              </Capability>
                          </WMT_MS_Capabilities>');
       select extractvalue(l_xml
                          ,'//WMT_MS_Capabilities/Capability/Layer/Layer/Style/LegendURL/OnlineResource@xlink:href'
                          ,'xmlns:xlink="http://www.w3.org/1999/xlink"')
         into l_url
         from dual;
         dbms_output.put_line(l_url);
    end;This code executes fine in a 9.2.0.5 database but on Oracle 10.2.0.4 I get:
    ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00601: Invalid token in: '//WMT_MS_Capabilities/Capability/Layer/Layer/Style/LegendURL/OnlineResource@xlink:href'
    ORA-06512: at line 26What am I doing wrong?

    Found the bug. there is a / missing before the @ in the xpath expression. 9R2 does not seem to care about this.
    Correct path=
    '//WMT_MS_Capabilities/Capability/Layer/Layer/Style/LegendURL/OnlineResource/@xlink:href'

  • '/soap:Envelope ' in extract throws invalid token error

    I'm receiving xml via webservice/soap and placing in an XMLTYPE table. Upon trying to execute a test query:
    SELECT
    EXTRACTVALUE(VALUE(d),'Destinations/CountryID') AS ID
    FROM X_TEST p,
    TABLE (xmlsequence(EXTRACT(p.object_value,'/soap:Envelope/soap:Body/GetUserDestinationResponse/GetUserDestinationResult/DestinationResults/DestinationsList//Destinations'))) d
    I get an error similar to: (note path here in error is diff than above extract statement)
    ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00601: Invalid token in: 'soap:Envelope/soap:Body/GetUserDestinationResponse/GetUserDestinationResult/DestinationResults/DestinationsList/Destinations/DestinationList/Destination//Provider'
    Without the soap:Envelope/soap:Body there is no error. Is there a problem using the ':' here?
    Here's a snippet of the stored xml:
    <?xml version="1.0" encoding="utf-8"?>
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <soap:Body>
    <GetUserDestinationsResponse xmlns="http://xxx.xxx.xxx.xx/somesite_ws/">
    <GetUserDestinationsResult>
    <DestinationResults>
    <DestinationsList>
    <Destinations>
    <CountryID>101</CountryID>
    <CountryDescription>Indonesia</CountryDescription>
    </Destinations>
    </DestinationList>
    </DestinationResults>
    </GetUserDestinationsResult>
    </GetUserDestinationsResponse>
    </soap:Body>
    </soap:Envelope>

    Thanks,
    that set me in the right direction - I had tried the third parm before but must not have been just right being that there are multiple namespaces given. Appears I have to always use the namespace parm to accurately obtain the data. To conclude - this is what I ended up with to get this returning data properly:
    SELECT
    EXTRACTVALUE(VALUE(d),'/Destination/DestinationId', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"') AS ID,
    Get_Point(EXTRACTVALUE(VALUE(d),'/Destination/Longitude', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"'),
    EXTRACTVALUE(VALUE(d),'/Destination/Latitude', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"')) AS geom,
    EXTRACTVALUE(VALUE(p),'/Provider/ProviderName', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"') AS provider_name,
    EXTRACTVALUE(VALUE(p),'/Provider/ProviderSpecific/HospitalInformation/whoAvainFlu', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"') AS avaianflu,
    VALUE(p) AS xmlb
    FROM X_MEDAIRE xml
    ,TABLE (xmlsequence(EXTRACT(xml.object_value,
    '/soap:Envelope/soap:Body/*', 'xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"'
    ))) e
    ,TABLE (xmlsequence(EXTRACT(VALUE(e),
    '/long/path/after/soap', 'xmlns="http://xxx.xxx.xxx.xx/some_ws/"' ))) d
    ,TABLE (xmlsequence(EXTRACT(VALUE(d),
    '/Destination/ProviderList/Provider', 'xmlns="http://xxx.xxx.xxx.xxx/some_ws/"' ))) p
    WHERE
    EXTRACTVALUE(VALUE(p),'/Provider/ProviderType', 'xmlns="http://xxx.xxx.xxx.xxx/some_ws/"') = 'Hospital'

  • LPX-00601: Invalid token

    Hallo,
    and the next problem arised when trying to
    SELECT XMLTransform(x.xmldoc,
    (select stylesheet from stylesheet_tab where id = 1)).getStringVal()
    AS result
    FROM testtab x;
    =>
    ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00601: Invalid token in
    <xsl:value-of select="auskunfteiAntwort[@xsi:type='faResponse']/auskunftAusCacheA1"/>
    Whats the problem with this line ?
    The xsl file already works when the tranformation is done with java instead of oracle.
    Thanks,
    Jochen

    SQL> select * from nls_session_parameters;
    NLS_LANGUAGE AMERICAN
    NLS_TERRITORY AMERICA
    NLS_CURRENCY $
    NLS_ISO_CURRENCY AMERICA
    NLS_NUMERIC_CHARACTERS .,
    NLS_CALENDAR GREGORIAN
    NLS_DATE_FORMAT DD-MON-RR
    NLS_DATE_LANGUAGE AMERICAN
    NLS_SORT BINARY
    NLS_TIME_FORMAT HH.MI.SSXFF AM
    NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
    HH.MI.SSXFF AM TZR
    NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
    NLS_DUAL_CURRENCY $
    NLS_COMP BINARY
    NLS_LENGTH_SEMANTICS BYTE
    NLS_NCHAR_CONV_EXCP FALSE
    SQL> select * from nls_database_parameters;
    NLS_LANGUAGE AMERICAN
    NLS_TERRITORY AMERICA
    NLS_CURRENCY $
    NLS_ISO_CURRENCY AMERICA
    NLS_NUMERIC_CHARACTERS .,
    NLS_CHARACTERSET AL32UTF8
    NLS_CALENDAR GREGORIAN
    NLS_DATE_FORMAT DD-MON-RR
    NLS_DATE_LANGUAGE AMERICAN
    NLS_SORT BINARY
    NLS_TIME_FORMAT HH.MI.SSXFF AM
    NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
    NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
    NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
    NLS_DUAL_CURRENCY $
    NLS_COMP BINARY
    NLS_LENGTH_SEMANTICS BYTE
    NLS_NCHAR_CONV_EXCP FALSE
    NLS_NCHAR_CHARACTERSET UTF8
    NLS_RDBMS_VERSION 10.2.0.1.0
    I don't find something like a xsi namespace prefix.
    In fact thats the first time "xsi" appears in this stylesheet. Is Oracle more strict than the "standard" ?

  • System.Exception: Error: Invalid token in RPDS stream. StringTable token: 0x12.

    When i am trying to create a report the above error occur,I am using SQL 2012 SP1 .The issue is regarding CU hotfixes?
    Detail error is
    System.Exception: Error: Invalid token in RPDS stream. StringTable token: 0x12.
    at Microsoft.ReportingServices.Rendering.RPDSProcessing.RPLReader.ReadStringTable(Int64 offset, RPLContext context)
    at Microsoft.ReportingServices.Rendering.RPDSProcessing.RPLReader.ReadVersionedReport(RPLReport report, RPLContext context)
    at Microsoft.ReportingServices.Rendering.RPDSProcessing.RPLReader.ReadReport(RPLReport report, RPLContext context)
    at Microsoft.ReportingServices.Rendering.RPDSProcessing.RPLReport..ctor(BinaryReader reader)
    at Microsoft.Reporting.AdHoc.DataManagement.Internal.DataManager.PopulateRimWithRplData(Stream stream, HashSet`1 itemsToNotParse)
    at Microsoft.Reporting.AdHoc.DataManagement.Internal.DataManager.HandleRenderEditResponse(IAsyncEnumeratorCallback aec)

    I haven't seen this one before. Have you tried the RSSharePoint.msi from http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2894115&kbln=en-us? Grab the Fix named "2012_SP1_RSShrPnt_CU7_2894115_11_0_3393_x64".
    Deploy that update to your SharePoint servers.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • WHAT IS THE FIX TO THIS ERROR:  XML Parsing error: not well-formed (invalid token) (error code 4)

    Hello, looking to see if there's anyone out there who knows how to resolve this error from popping up when I open a previously saved adobe file with data populated inside (tax form). 
    The error states: 
    XML Parsing error: not well-formed (invalid token) (error code 4), line 16028, column 2 of file. 
    So when I go to open this file, THAT ERROR appears.  But then allows me to view the content inside the PDF (tax form) - however it will not allow further editing - this is an issue. 
    This began after working and populating certain files, then transferring to a hosting site.  Now when I open any PDF file from the hosting site, the error appears.  Could just be coincidental however throwing that out there in case it's useful.
    What causes this error & what is the fix?
    Cheers! 

    Unfortunately No.  This was a tax form downloaded from IRS.gov.  The PDF file has been populated and saved off.  I believe the file has somehow become corrupt.  Curious how to cleanse the file so it opens without issue (that error message).
    Thanks for your response

  • The following syntax error occurred during parsing: Invalid token, Line 1,

    Hello Experts,
    I hope someone could help me. I am trying to create a MDX formula in Account dimension (Cuenta).
    When formula created use "Iif" syntax, system give the following error:
      - [CUENTA].[H1].[#X000] Parser: The following syntax error occurred during parsing: Invalid token, Line 1, Offset 15, [.
    My Account dimension (Cuenta) has 3 parent, and the formula introduces is:
    'Iif([Cuenta].[H1].[BLOQ_FASEC]<0.5 and [Cuenta].[H1].[BLOQ_FASEC]>-0.5,0,[Cuenta].[H1].[BLOQ_FASEC])
    We try another syntax
    'Iif([Cuenta].[BLOQ_FASEC]<0.5 and [Cuenta].[BLOQ_FASEC]>-0.5,0,[Cuenta].[BLOQ_FASEC])
    But same error persist.
    Could you have any idea?
    Thanks

    Can you check into dimension properties what is the size of FORMULA propertiy?
    Make sure is bigger than number of chars from your formula.
    Do you have multiple hierarchies for CUENTA?
    The formula which you mentioned it has to be into column: FORMULAH1.
    Also make sure that your formula doesn't have an end of line at the end. That can cause again problems.
    Regards
    Sorin Radulescu
    Edited by: Sorin Radulescu on Apr 22, 2010 11:03 AM

  • SQL Table Key Is "@ID" - InValid Token

    I am trying to use CF9 Builder to auto-generate CFC's against a UniVerse database.  In UniVerse, the SQL key name for all of my tables is "@ID".  The auto-generated CFC's contain errors which indicate that CFML does not accept the "@" character....indicating "InValid Token"
    While I can create an SQL alias for @ID (such as Customer.ID)  and delete the offending lines having errors (per the above) the getter and setter functions for the next lines (Customer) again come back with InValid Token errors.
    Help would be appreciated.

    I want to do this because in my case it is not always necessary to extract the entire XML sheet from the database. Furthermore the XML heirarchy is highly dynamic (that's why I just used a sample of XML in my explanation) so I assumed using the
    default table structure that OPENXML returned would incur the least amount of information loss when converting from XML to SQL and vice versa.
    Are you saying that there is a better method to store and extract XML to and from an SQL table than OPENXML?
    yes from SQL 2005 onwards you can use functions like nodes(),query() which can use xpath toshred the data from XML. See this example below
     http://visakhm.blogspot.com/2012/10/shred-data-as-well-as-metadata-from-xml.html
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • Excessive audit record "Invalid token"

    Excessive audit record "Invalid token" in audit database for one column occuring repeatedly can we know whats the reason behind this why it is caused and any way to resolve this ?

    Hi Caroline,
    Thanks for your reply.
    Iam seeing directly in Audit database and for every 35 seconds  and its being generated in  column detail_text as "invalid token" simultaneously its showing in event_type_description as "user log on fails"
    Please let me know what is the way to resolve it or what's reson behind this.
    Regards,
    Ram.

Maybe you are looking for

  • CRM to SAP R/3

    Hi experts, My client have a requiremnt that they installed the ADD-On in their SAP R/3 Server and they can access credit management system FD32 from SAP R/3 Server. They have CRM Server and they want to access the SAP R/3 screens from CRM. I created

  • Problem in using sum with distinct in case

    Hi all, I want to use a sum function with distinct and also with case. below is the format i am using. Sum( distinct case when a.value='TOOL' then e.value else 0 end) This is working but i don't get distinct records. SO i tried using in this way Sum(

  • Interface includes class

    what is the benefit if we use a class inside interface and in real time where we will use

  • Detect rows selection in ALV using oops

    Hi ALL, I HAVE An ALV OUTPUT OF RECORDS USING OOPS. NOW I CAN SELECT ONE OR MULTIPLE ROWS OF THE OUTPUT AND I HAVE ADDED A DELETE ICON TO MY TOOL BAR. I HAVE BACK AND EXIT BUTTON AND I HAVE CODE FOR THE SAME IN PAI. FOR DELETE ICON SY-UCOMM IS DELE A

  • Delivery has not not been put away

    HI Friends When iam trying to do dlivery the system is throwing me an erroe message Delivery has not been put away/picked completly. E VL 609 is the message.please help me in this regards. Thanks& Regards Jaya Yesubabu.p