Invalid user endpointid error
I added an new outlook.com e-mail (which is basically setup us a hotmail account) - it can send but not recieve. so I went to delete it to go manually set it up and I get the following error: Invalid user endpointid. How do I get rid of this account, I tried managing e-mail on the verizon site,but I am not sure that worked to delete it from there.
Has anyone found a solution to this yet? I am having the same problem.
I have several Live.com email accounts. (One of which is a business email account)
I had each of them setup on my phone.
I later setup outlook on my laptop, to check my email for 2 of the accounts (one of which was my business email account).
None of my Live.com accounts were staying synch'ed with my phone.
Even when I tried to manually synch them, it took several tries and since I was always days out of synch, it always took about 15 minutes to get up-to-date. That's a real pain when you need to find that email from yesterday, NOW!... especially when the email is in the business email account!!!
My yahoo and my gmail accounts are working perfectly.
I went to the local Verizon store and asked for help
The rep said there was nothing wrong with the Live.com setup... he said the Live.com WILL NOT automatically stay synch'ed, like yahoo and gmail do.
(IS that true????)
He suggested deleting one of my Live.com accounts from the phone.
The account he deleted (REMOVE), was my business email account.
We then added it back in.
He said it would automatically synch when created.
The account did not automatically synch. It did not download and emails.
I tried to manually synch it.
nothing happened.
I tried to remove the account again, so I could try adding it again.
That's when I first got the "Invalid User EndPointID" message.
Has anyone found a solution to this yet?
Similar Messages
-
"Invalid User ID" error while running OSoft Application in browser
Hi,
I have installed BPC 7.5 SP04 in Multi Server environment where SQL Server, OLAP Server, Reporting Server on one machine and Application Server and Web Server on other machine, After installing I tried to run Osoft application via url "http://Application Server name/OSoft" as suggested in Install guide but receiving "Invalid User ID" error
Error Information
Server Error in '/OSoft' Application.
Invalid UserID
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Exception: Invalid UserID
Please guide me on this as what can be the cause of this error and how to fix it.
I have used Windows Server 2008 with IIS 7.
Thanks,
Rohit
Edited by: Khatak Rohit on Mar 18, 2011 10:57 AMFirst login must be done with Installation user.
In your case you tried to login from your PC where you were conected with your user.
This user is used to connect to BPC and this user has no rights into BPC.
It was used this user because BPC allow Windows authentication.
So you have to go into IE - Tools - Internet Options
Select Security Tab - Select Intranet
Push Custom Level
Go to section - User Authentication - select "Prompt always user and pwd"
Close IE
Open again and try http://nameofserver/osoft you will receive now a prompt for user and pwd.
Input an user and pwd with access to BPC and you will see this time the page will be load correct.
Regards
Sorin Radulescu -
Warning 503 80314:Invalid user endpointid
I changed my password on google. Now my droid htc is no longer able to access my gmail. It sends me a message from [email protected] that says "Your account could not be authenticated. If you have recently changed your email password, please enter the most current password in setting to continue receiving emails. So, I go to settings and try to update the password. Then I get the "Warning 503 80314: Invalid user endpointid" message. What do I do to fix this so that my phone can access my gmail again?
ThanksI'm having the same issue with a replacement SGS3. How do I delete my account to begin again? I've tried under "Settings" then "Accounts" but only find option to add, not delete.
Thanks. -
DROID Razr M Invalid User Endpointid
I attempted to configure my hotmail account in new Razr M- the account shows on the phone but inbox is empty and I am unable to send or receive mail. When it syncs or when I attempt to delete account i get the following message : Invalid user endpointid. Any help would be appreciated.
Hi there Nycchris!
Using email on your smartphone is definitely important! I'm so sorry that you're having issues with your hotmail! I will be delighted to provide some suggestions to get this up and running.
First you may want to try putting the phone into Safe Mode:
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=63868
These are the steps for adding a personal account:
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=64299
These are the steps for removing a personal account:
http://support.verizonwireless.com/clc/devices/knowledge_base.html?id=64205
Let me know if these steps worked!
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport -
Bdc_open_group invalid user name error
hai ,
the given below is my bdc programming. while am executing(F8) these program it depicts the message in one dilaog box like as bdc_open_group , user name is invalid. or say this program is correct or not.
if any error .recover it
plz resolve this problem.
REPORT YSUSBDC5.
DATA: BDC_TAB LIKE BDCDATA OCCURS 6 WITH HEADER LINE.
START-OF-SELECTION.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING
CLIENT = SY-MANDT
DEST = FILLER8
GROUP = 'SURENDER'
HOLDDATE = FILLER8
KEEP = FILLER1
USER = FILLER12
RECORD = FILLER1
PROG = SY-CPROG.
IMPORTING
QID =
EXCEPTIONS
CLIENT_INVALID = 1
DESTINATION_INVALID = 2
GROUP_INVALID = 3
GROUP_IS_LOCKED = 4
HOLDDATE_INVALID = 5
INTERNAL_ERROR = 6
QUEUE_ERROR = 7
RUNNING = 8
SYSTEM_LOCK_ERROR = 9
USER_INVALID = 10
OTHERS = 11
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM FILL_BDC_TAB.
CALL FUNCTION 'BDC_INSERT'
EXPORTING
TCODE = 'FK02'
POST_LOCAL = NOVBLOCAL
PRINTING = NOPRINT
SIMUBATCH = ' '
CTUPARAMS = ' '
TABLES
DYNPROTAB = BDC_TAB.
EXCEPTIONS
INTERNAL_ERROR = 1
NOT_OPEN = 2
QUEUE_ERROR = 3
TCODE_INVALID = 4
PRINTING_INVALID = 5
POSTING_INVALID = 6
OTHERS = 7
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BDC_CLOSE_GROUP'
EXCEPTIONS
NOT_OPEN = 1
QUEUE_ERROR = 2
OTHERS = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM FILL_BDC_TAB.
REFRESH BDC_TAB.
PERFORM POPULATE_BDC_TAB USING:
'1' 'SAPMF02K' '0106',
' ' 'RF02K-LIFNR' 'SUREN',
' ' 'RF02K_D0110' 'X',
'1' 'SAPMF02K' '0111',
' ' 'LFA1-NAME1' 'SURENDER',
' ' 'LFA1-STRAS' '69 abass ali',
' ' 'SZA1_D0100-SMTP_ADDR' '[email protected]'.
ENDFORM.
FORM POPULATE_BDC_TAB USING FLAG VAR1 VAR2.
CLEAR BDC_TAB.
IF FLAG = '1'.
BDC_TAB-PROGRAM = VAR1.
BDC_TAB-DYNPRO = VAR2.
BDC_TAB-DYNBEGIN = 'X'.
ELSE.
BDC_TAB-FNAM = VAR1.
BDC_TAB-FVAL = VAR2.
ENDIF.
APPEND BDC_TAB.
ENDFORM.
regards
SURENDERHallo,
I want to share what happend to me with my bdc Program.
I was able to create Sessions of Batch input (SM35) through the Creation Program ZRSFFL0A (writen below) from 29.04.2008 to 21.05.2008. On May 21 I changed a parameter to play an error, since than the proper original programme has never worked.
Now while I am executing(F8) it shows the message in one dialog box 'BDC_OPEN_GROUP user name is invalid'. I don't know why.
**During Debugging the program stopped Function SAPLLANG:
FUNCTION CONVERSION_EXIT_ISOLA_OUTPUT.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(INPUT)
*" EXPORTING
*" VALUE(OUTPUT)
OUTPUT = SAVE_INPUT(1) = INPUT.
CHECK SAVE_INPUT(1) NA ' *'.
SELECT SINGLE * FROM T002 WHERE SPRAS = INPUT.
CHECK SY-SUBRC = 0.
OUTPUT = T002-LAISO.
ENDFUNCTION.
Original programme
REPORT zrsffl0a.
TABLES: apqi, sflight.
DATA: BEGIN OF BDC_TAB OCCURS 50.
INCLUDE STRUCTURE BDCDATA.
DATA END OF BDC_TAB.
PARAMETERS:
name LIKE apqi-groupid DEFAULT SY-UNAME,
carrid LIKE sflight-carrid DEFAULT 'AA',
connid LIKE sflight-connid DEFAULT '0064',
plane LIKE sflight-planetype DEFAULT 'A310-200'.
START-OF-SELECTION.
WRITE: / 'Top creation of a session BDC',
sy-mandt, name, sy-uzeit.
CALL FUNCTION 'BDC_OPEN_GROUP'
EXPORTING: CLIENT = sy-mandt,
GROUP = name,
USER = sy-uname,
KEEP = 'X'.
PERFORM GENERATE_BDC_DATA.
CALL FUNCTION 'BDC_INSERT'
EXPORTING TCODE = 'ZTCF2'
TABLES DYNPROTAB = BDC_TAB.
CALL FUNCTION 'BDC_CLOSE_GROUP'.
WRITE: / 'End creation of a session BDC',
sy-mandt, name, sy-uzeit.
*& Form GENERATE_BDC_DATA
text
--> p1 text
<-- p2 text
form GENERATE_BDC_DATA .
REFRESH BDC_TAB.
CLEAR BDC_TAB.
MOVE: 'ZRSFFL03A' TO BDC_TAB-PROGRAM,
100 TO BDC_TAB-DYNPRO,
'X' TO BDC_TAB-DYNBEGIN.
APPEND BDC_TAB.
CLEAR BDC_TAB.
MOVE: NAME TO BDC_TAB-FNAM,
SY-UNAME TO BDC_TAB-FVAL.
APPEND BDC_TAB.
CLEAR BDC_TAB.
MOVE: carrid TO BDC_TAB-FNAM,
'AA' TO BDC_TAB-FVAL.
APPEND BDC_TAB.
CLEAR BDC_TAB.
MOVE: connid TO BDC_TAB-FNAM,
'0064' TO BDC_TAB-FVAL.
APPEND BDC_TAB.
CLEAR BDC_TAB.
MOVE: plane TO BDC_TAB-FNAM,
'A310-200' TO BDC_TAB-FVAL.
APPEND BDC_TAB.
CLEAR BDC_TAB.
endform. " GENERATE_BDC_DATA
I thank those who will give me suggestions and / or explanations.
Best regards
Claudia -
41439 Login Error / Invalidation User password
Portal Login Error 41439:
I have Infrastructure and App Server (BI installation) on the same Win2K server. While trying to Login to Oracle10gAS Portal, I get following error.
WWV-41439 - You cannot login because there is no configuration information stored in the enabler configuration table.
Cause:
The default domain is not set in the Apache configuration. When this occurs, only the hostname is shown in the login link and the domain is not included.
Action:
Include the domain in the ServerName paramenter.
Where should this ServerName be modified? (Which file? in which OracleHome?)
Invalidation User Password:
On a different note, what should be the password of 'Invalidator' in 'Web Cache Settingst'? (I tried invalidator). For any change in config, currently it gives ORA-00017 error.
"Error in getting the Portal version INSTALL_ERROR : Could not obtain Portal version : ORA-01017: invalid username/password; logon denied"
Any suggestion will be appreciated.
Thanks,
JayRegarding Invalidator password, it might be worth trying you OEM middle tier password (for ias_admin)
-
UDO creation error- invalid user
i am trying to craeate UDO using coding .
but error is coming like that
lRetCode= -1120
msg " invalid user & password"
Any solutionAVIJIT,
Check if user has a Professional License assigned.
Have you managed to register other objects with problem before?
Have you tried to register the object in the B1 GUI?
Also I include code samples in how to register Master Data and Document Objects.
Master Data with child table
Private Function RegisterTRAD(ByRef oCompany As SAPbobsCOM.Company, ByRef oApplication As SAPbouiCOM.Application) As Boolean
RegisterTRAD = False
Dim oUserObjectMD As UserObjectsMD = oCompany.GetBusinessObject(BoObjectTypes.oUserObjectsMD)
Dim lRetCode As Long
Try
If Not oUserObjectMD.GetByKey("ADAT_TRAD") Then
oUserObjectMD.Code = "ADAT_TRAD"
oUserObjectMD.Name = "Traduções"
oUserObjectMD.ObjectType = BoUDOObjType.boud_MasterData
oUserObjectMD.TableName = "ADAT_TRAD"
oUserObjectMD.CanCancel = BoYesNoEnum.tYES
oUserObjectMD.CanClose = BoYesNoEnum.tYES
oUserObjectMD.CanCreateDefaultForm = BoYesNoEnum.tNO
oUserObjectMD.CanDelete = BoYesNoEnum.tYES
oUserObjectMD.CanFind = BoYesNoEnum.tYES
oUserObjectMD.CanLog = BoYesNoEnum.tYES
oUserObjectMD.CanYearTransfer = BoYesNoEnum.tYES
oUserObjectMD.LogTableName = "AADAT_TRAD"
oUserObjectMD.ExtensionName = ""
oUserObjectMD.FindColumns.ColumnAlias = "Code"
oUserObjectMD.FindColumns.ColumnDescription = "Código"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.SetCurrentLine(1)
oUserObjectMD.FindColumns.ColumnAlias = "U_TableNam"
oUserObjectMD.FindColumns.ColumnDescription = "Nome da Tabela"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_TableDsc"
oUserObjectMD.FindColumns.ColumnDescription = "Descrição da Tabela"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_FieldNam"
oUserObjectMD.FindColumns.ColumnDescription = "Nome do Campo"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_FieldDsc"
oUserObjectMD.FindColumns.ColumnDescription = "Descrição do Campo"
oUserObjectMD.FindColumns.Add()
lRetCode = oUserObjectMD.Add()
'// Verificar existência de erros ao adicionar o UDO
If lRetCode <> 0 Then
oApplication.MessageBox("RegisterTRAD(Add): " & lRetCode.ToString)
Else
RegisterTRAD = True
End If
End If
Catch ex As Exception
oApplication.MessageBox("RegisterTRAD(): " & oCompany.GetLastErrorCode & ", " & ex.Message)
Finally
System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserObjectMD)
oUserObjectMD = Nothing
lRetCode = Nothing
GC.Collect()
End Try
End Function
Document with child table
Private Function RegisterNR(ByRef oCompany As SAPbobsCOM.Company, ByRef oApplication As SAPbouiCOM.Application) As Boolean
RegisterNR = False
Dim oUserObjectMD As UserObjectsMD = oCompany.GetBusinessObject(BoObjectTypes.oUserObjectsMD)
Dim lRetCode As Long
Try
If Not oUserObjectMD.GetByKey("ADAT_NR") Then
oUserObjectMD.Code = "ADAT_NR"
oUserObjectMD.Name = "Nota de Recepção"
oUserObjectMD.ObjectType = BoUDOObjType.boud_Document
oUserObjectMD.TableName = "ADAT_ONR"
oUserObjectMD.CanCancel = BoYesNoEnum.tYES
oUserObjectMD.CanClose = BoYesNoEnum.tYES
oUserObjectMD.CanCreateDefaultForm = BoYesNoEnum.tNO
oUserObjectMD.CanDelete = BoYesNoEnum.tYES
oUserObjectMD.CanFind = BoYesNoEnum.tYES
oUserObjectMD.CanLog = BoYesNoEnum.tYES
oUserObjectMD.LogTableName = "AADAT_NR"
oUserObjectMD.CanYearTransfer = BoYesNoEnum.tYES
oUserObjectMD.ManageSeries = BoYesNoEnum.tYES
oUserObjectMD.ChildTables.TableName = "ADAT_NR1"
oUserObjectMD.ChildTables.LogTableName = "AADAT_NR1"
oUserObjectMD.ExtensionName = ""
oUserObjectMD.FindColumns.ColumnAlias = "DocNum"
oUserObjectMD.FindColumns.ColumnDescription = "Nº do Documento"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.SetCurrentLine(1)
oUserObjectMD.FindColumns.ColumnAlias = "Series"
oUserObjectMD.FindColumns.ColumnDescription = "Série"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_CardCode"
oUserObjectMD.FindColumns.ColumnDescription = "Código do PN"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_CardName"
oUserObjectMD.FindColumns.ColumnDescription = "Nome do PN"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_RefNum"
oUserObjectMD.FindColumns.ColumnDescription = "Nº de Ref. do Fornecedor"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_DataRcp"
oUserObjectMD.FindColumns.ColumnDescription = "Data de Recepção"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_HoraRcp"
oUserObjectMD.FindColumns.ColumnDescription = "Hora de Recepção"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_ItemName"
oUserObjectMD.FindColumns.ColumnDescription = "Nome do Artigo"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_PrcName"
oUserObjectMD.FindColumns.ColumnDescription = "Nome do Parcelário"
oUserObjectMD.FindColumns.Add()
oUserObjectMD.FindColumns.ColumnAlias = "U_FolhaNam"
oUserObjectMD.FindColumns.ColumnDescription = "Folha"
oUserObjectMD.FindColumns.Add()
lRetCode = oUserObjectMD.Add()
'// Verificar existência de erros ao adicionar o UDO
If lRetCode <> 0 Then
oApplication.MessageBox("RegisterNR(Add): " & lRetCode.ToString)
Else
RegisterNR = True
End If
End If
Catch ex As Exception
oApplication.MessageBox("RegisterNR(): " & oCompany.GetLastErrorCode & ", " & ex.Message)
Finally
System.Runtime.InteropServices.Marshal.ReleaseComObject(oUserObjectMD)
oUserObjectMD = Nothing
lRetCode = Nothing
GC.Collect()
End Try
End Function
Regards,
Vítor -
Error when install Oracle XE in Ubuntu: invalid user && ...
When I install Oracle XE in Ubuntu I got message from Terminal
/bin/chown: `oracle:dba': invalid user
/bin/chown: `oracle:dba': invalid user
/bin/chmod: cannot access `/etc/init.d/oracle-xe': No such file or directory
/var/lib/dpkg/info/oracle-xe-univ.postinst: 30: /sbin/chkconfig: not found
-e You must run '/etc/init.d/oracle-xe configure' as the root user to configure the database.
I don't know how to resolve this problem!
Have anyone can help me?
Thank you anyway!>
I don't know how to resolve this problem!
Have anyone can help me?
>
I have done a number of Oracle Database XE installations and one thing I am very confident about is that fact that the only certified Linux distros are below.
>
<li>Red Hat Enterprise Linux RHEL3 and RHEL4</li>
<li>Suse SLES-9</li>
<li>Fedora Core 4</li>
<li>Red Flag DC Server 5.0/MIRACLE LINUX V4.0/Haansoft Linux 2006 Server (Asianux 2.0 Inside)</li>
<li>Debian 3.1</li>
>
The only way you can sort out this issue is by installing your software on a Linux Distro that has been certified for Oracle Database XE.
You perhaps might want to go through the installation manual; unlike the other Oracle Database Installation manuals, it is something you can finish reading in less than an hour.
http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm#BABGGAJA
There is an Oracle Database XE forum here {forum:id=251}; do a quick search and see if you will find people who have managed to install XE on Ubuntu
Regards,
Phiri -
IPhone "FIOS remote" app update caused 'Invalid User Credential'
Hey there,
I recently updated my "FIOS remote" app on my iPhone and started getting 'Invalid User Credential' when checking my DVR in the app or the TV listings, also wasnt able to submit feedback.
TheAbout screen says I'm using "Verizon FIOS mobile remote version 3.1.56 build number 16"
I called Verizon support who helped me.
The fix: Open a browser and go to www.verizon.com/fiostv/web and logon.
Feedback in the app still doesn't work so I thought I'd post this here for others. By the way, I think a 100 character limit is too small for feedback.
KevinLawrenceH wrote:
I have been trying to get the FiOS Remote app to work, but it keeps giving me problems with the sign on. I don't think my sign on is the issue.
My signon works for ...
1. My FiOS app - in which I can pull my account information
2. the Verizon mobile website - in which I can login and see all my information
Within the My FiOS app when I try to manage my DVR, it launches the FiOS remote app. This app won't let me sign in. I constantly get the "Sign In Error" User ID or Password is invalid. Please try again."
I know this error is erroneous because of my ability to login everywhere else.
Please advise on what I can do next.
Hi, I know that app requires that you are connected to the wifi in your home and not on the iphone's 3g. If you have verified that you are on the Actiontec WiFI (not a second router's wifi) and that your login is correct at all those sites, then you might need to email the dev from the apple store. It gives you a link to email them there. -
Invalid Key code Error while installing crystal report server 11
While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me knowAjit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony -
Background job in APO does not start because of invalid user name
Hello,
I have a macro in a planning book and the /sapapo/cons_check program which a triggered via a background job. Now, I have problems with the start of the job:
At the time the job was created inside SAP, an error occured. The job contains invalid values.
The user name within the job does not exist any more.
Now, I try to change the user name of the job (via step in sm37), but the error occured again.
I have the possibility to create the invalid user name once again in su01.
But I want to change the user name of the job - does somebody know how to do it?
Thanks for your help!
Kind regards
HeinzHello Heinz, this looks surprising.
It's quite easy to change the user name in the SM37 job step, and we haven't faced issues with this.
Could you check how many jobs are in either "scheduled" or in "released" status, and change steps for all of them? May be you changed the scheduled job, but the released job wasn't changed.
Use your job name and give a search date as 1-2 years in the past, and around 1 month in the future. With this time horizon, you should most likely be able to capture all the relevant jobs having the same name that you are using.
Now change the user name in step for all the jobs received above to be fully sure.
One more trial could be to copy the current scheduled job to another job, modify the user name in this newly created job and then delete the old one.
One of the above trials might possibly help you in some way, else its very tough to understand/explain your situation.
Thanks - Pawan -
Invalid Cursor Position Error on Windows XP using CachedRowSet
Hello, I don't know if this question lies here, but I thought it would be the well suited place so please pardon me if it isn't. I am trying to access multiple pages from my database on my XP machine but I am getting an "invalid cursor position" error when trying to access the next page. I don't know how this error is coming about because it works well on a Vista machine with no errors. I don't know if it is my drivers or something that brings about the problem. I am using mysql connecter 5.1.10, JRE 1.6.0_02 and windows XP SP2
Below is a simple code that brings the error.
package Admin; import javax.sql.rowset.CachedRowSet; import com.sun.rowset.CachedRowSetImpl; public class test { public void table() { try { CachedRowSet crs=new CachedRowSetImpl(); crs.setUrl("jdbc:mysql://host:3306/database"); crs.setUsername("User"); crs.setPassword("password"); crs.setCommand("select * from myTable"); int[] keys = {1}; crs.setKeyColumns(keys); crs.execute(); crs.last(); if(crs.getRow()>500){ //new overLimit(); } crs.setPageSize(3); crs.execute(); while (crs.next()) { System.out.print("page one----"); System.out.println(crs.getString(1)); } while(crs.nextPage()){ System.out.println("page two---"); while (crs.next()) { System.out.println("in page two"); System.out.println(crs.getString(1)); } } } catch (Exception e) { e.printStackTrace(); } } public static void main(String []args){ new test().table(); } }Yes I am running the same code on both machines. The output I get on the XP machine is shown below. I modified the code I posted earlier and replaced the "page two" text with "page (then page number)" and also omitted the "in page two" text for better readability---------PAGE 0---------
DB09140110
DU35463010
EX29201810
---------PAGE 1---------
EX38341510
EX40471810
KZ280299
----------PAGE 2---------
LA130299
LC130299
MC081009
----------PAGE 3---------
RZ300502
VA130299
VI020209
----------PAGE 4---------
YX101008
ZE220299
ZF231105and vista....
----------PAGE 0---------
EX38341510
EX40471810
KZ280299
----------PAGE 1---------
LA130299
LC130299
MC081009
----------PAGE 2---------
RZ300502
VA130299
VI020209
----------PAGE 3---------
YX101008
ZE220299
ZF231105 -
Solution Manager 4.0, Red hat Linux 4.0 ES & AS, JSF user creation error
Dear SAP Gurus, Please advise.
I have problem during the installation of SAP SOL Man4.0
Input:
I am using <b>SOL Man 4.0</b> with Linux version 2004s version2
1. <b>Red Hat 4.0 ES</b> , 2. <b>Red hat 4.0 AS</b> (Tried both)
<b>Java 1.4.2_09
java Cripto: 1.4.2</b>
when it go the step 34 out of 44 when it create JSF user creation, I am getting error
It could not able to create Java user.
It stops. this error is coming during sapjsf user creation.
is this bug in SOL man 4.0, any one able to successfully install on Linux.
I see lot of people had probem while doing on windows, but no one tried on Linux.
I really appriciate, if some one can help on this.
Thanks
Ashok .K
[email protected]Dear Raguraman C ,
Thanks for your help, here is the log i got, during installation step of <b>Phase 33 of 45 JSF user creation</b>.
Please analyse, advise me what Java settings need to be changed.
Thanks
Ashok .K
[email protected]
INFO 2006-12-29 00:06:38
Execute step createJSF of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind |ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0.
INFO 2006-12-29 00:06:39 [syuxcpath.cpp:351]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.jlaunch.
INFO 2006-12-29 00:06:39 [syuxcpath.cpp:351]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.log.
INFO 2006-12-29 00:06:39 [syuxccuren.cpp:264]
CSyCurrentProcessEnvironmentImpl::setGroup(PSyGroup)
Real group id set to 501.
INFO 2006-12-29 00:06:39 [syuxccuren.cpp:543]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroup)
Effective group id set to 501.
INFO 2006-12-29 00:06:39 [syxxccuren.cpp:105]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
Working directory changed to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
INFO 2006-12-29 00:06:39
CJSlibModule::writeInfo_impl()
Output of /usr/sap/SM1/DVEBMGS01/exe/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck / tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/O RA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install -c sysn r=01 -c ashost=machine5 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX - r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message is written to the logfile /tmp/sapi nst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.log.
WARNING 2006-12-29 00:09:27
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/SM1/DVEBMGS01/exe/jlaunch UserCheck.jlaunch com.sap.security.t ools.UserCheck /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir /SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS /install -c sysnr=01 -c ashost=machine5 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SA PJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with retu rn code 4. Output:
Dec 29, 2006 12:06:44... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Dec 29, 2006 12:06:44... Info: Connected to backend system SM1 client 001 as user DDIC
Dec 29, 2006 12:06:45... Info: Called for user SAPJSF
Dec 29, 2006 12:06:49... Info: Formal password check successful
Dec 29, 2006 12:06:49... Info: Will create user SAPJSF
Dec 29, 2006 12:09:20... Info: Created user SAPJSF of type A with reference user <none>
Dec 29, 2006 12:09:22... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Dec 29, 2006 12:09:27... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Invalid request.
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1395)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3917)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3354)
at com.sap.security.tools.UserCheck.createUser(UserCheck.java:1876)
at com.sap.security.tools.UserCheck.main(UserCheck.java:289)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Dec 29, 2006 12:09:27... Info: Leaving with return code 4
INFO 2006-12-29 00:09:27 [syuxcfile.cpp:280]
CSyFileImpl::remove()
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.
INFO 2006-12-29 00:09:27 [syuxcfile.cpp:280]
CSyFileImpl::remove()
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.clone.
ERROR 2006-12-29 00:09:27
CJSlibModule::writeError_impl()
CJS-30196 Invalid request.
ERROR 2006-12-29 00:09:27
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind |ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2 |0|createJSF was executed with status ERROR .
Ashok kalakota My coment:
Phase 33 of 45 JSF user creation
INFO 2006-12-29 00:06:38
Execute step createJSF of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind |ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0.
INFO 2006-12-29 00:06:39 [syuxcpath.cpp:351]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.jlaunch.
INFO 2006-12-29 00:06:39 [syuxcpath.cpp:351]
CSyPath::createFile()
Creating file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.log.
INFO 2006-12-29 00:06:39 [syuxccuren.cpp:264]
CSyCurrentProcessEnvironmentImpl::setGroup(PSyGroup)
Real group id set to 501.
INFO 2006-12-29 00:06:39 [syuxccuren.cpp:543]
CSyCurrentProcessEnvironmentImpl::setEffectiveGroup(PSyGroup)
Effective group id set to 501.
INFO 2006-12-29 00:06:39 [syxxccuren.cpp:105]
CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(iastring)
Working directory changed to /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
INFO 2006-12-29 00:06:39
CJSlibModule::writeInfo_impl()
Output of /usr/sap/SM1/DVEBMGS01/exe/jlaunch UserCheck.jlaunch com.sap.security.tools.UserCheck / tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/O RA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install -c sysn r=01 -c ashost=machine5 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX - r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message is written to the logfile /tmp/sapi nst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/UserCheck.log.
WARNING 2006-12-29 00:09:27
CJSlibModule::writeWarning_impl()
Execution of the command "/usr/sap/SM1/DVEBMGS01/exe/jlaunch UserCheck.jlaunch com.sap.security.t ools.UserCheck /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/lib:/tmp/sapinst_instdir /SOLMAN/SYSTEM/ORA/CENTRAL/AS/install/sharedlib:/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS /install -c sysnr=01 -c ashost=machine5 -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SA PJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with retu rn code 4. Output:
Dec 29, 2006 12:06:44... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Dec 29, 2006 12:06:44... Info: Connected to backend system SM1 client 001 as user DDIC
Dec 29, 2006 12:06:45... Info: Called for user SAPJSF
Dec 29, 2006 12:06:49... Info: Formal password check successful
Dec 29, 2006 12:06:49... Info: Will create user SAPJSF
Dec 29, 2006 12:09:20... Info: Created user SAPJSF of type A with reference user <none>
Dec 29, 2006 12:09:22... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Dec 29, 2006 12:09:27... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Invalid request.
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1395)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3917)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3354)
at com.sap.security.tools.UserCheck.createUser(UserCheck.java:1876)
at com.sap.security.tools.UserCheck.main(UserCheck.java:289)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Dec 29, 2006 12:09:27... Info: Leaving with return code 4
INFO 2006-12-29 00:09:27 [syuxcfile.cpp:280]
CSyFileImpl::remove()
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.
INFO 2006-12-29 00:09:27 [syuxcfile.cpp:280]
CSyFileImpl::remove()
Removing file /tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS/dev_UserCheck.clone.
ERROR 2006-12-29 00:09:27
CJSlibModule::writeError_impl()
CJS-30196 Invalid request.
ERROR 2006-12-29 00:09:27
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind |ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2 |0|createJSF was executed with status ERROR .
[root@machine5 AS]# cat UserCheck.log
Dec 29, 2006 12:06:44... Info: User management tool (com.sap.security.tools.UserCheck) called for action "checkCreate"
Dec 29, 2006 12:06:44... Info: Connected to backend system SM1 client 001 as user DDIC
Dec 29, 2006 12:06:45... Info: Called for user SAPJSF
Dec 29, 2006 12:06:49... Info: Formal password check successful
Dec 29, 2006 12:06:49... Info: Will create user SAPJSF
Dec 29, 2006 12:09:20... Info: Created user SAPJSF of type A with reference user <none>
Dec 29, 2006 12:09:22... Warning: Error during creation of user SAPJSF. Will remove user again to ensure clean exit state
Dec 29, 2006 12:09:27... Error: Exception during execution of the operation
[EXCEPTION]
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Invalid request.
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1395)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3917)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3354)
at com.sap.security.tools.UserCheck.createUser(UserCheck.java:1876)
at com.sap.security.tools.UserCheck.main(UserCheck.java:289)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Dec 29, 2006 12:09:27... Info: Leaving with return code 4
[root@machine5 AS]# pwd
/tmp/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS
[root@machine5 AS]# -
Window 8.1 update & invalid security certificate errors
I set up my new PC 2 days ago running Windows 8.1. I was able to visit all websites, including secure ones, w/no issues via Firefox. Last night, suddenly I was unable to access many secure websites. These include Google (Gmail) & Ilines (email). Here is a copy of the Google error:
"mail.google.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer)"
There is no button to bypass, as I have seen in the past. I tried deleting cert8.db which didn't resolve anything. I have also tried adding exceptions which also don't resolve the issue.
I searched support & found the link for the MS document (link below) indicating that FF & Windows Family Safety certificates are not playing nice.
http://support.microsoft.com/kb/2965142/en-us#appliesto
I tried to follow the guide, but when I get to step 6, there is no Microsoft Family Safety Certificate in the Trusted Root Certificates Authorities to export. For reference, I do not specifically have Family Safety enabled & am running my PC as admin, no other users. I personally have no use for this but it is my understanding that it cannot be uninstalled, either.
I have spent hours researching & making adjustments to different settings to no avail. It is frustrating enough setting up a new PC & transferring info w/out this extra hassle. Does anyone have any other suggestions? FF is my preferred browser, but if this can't be resolved I will need to use something else so that I can access these important websites.Thanks for the feedback cor-el. Here are the results:
1. Installed Kaspersky certificate per link= no change
2. Turned off Kaspersky= able to log in to Gmail but not the other secure sites I am having probs with
3. Booted in Safe Networking mode= able to log in to Gmail but not the other secure sites. Same blocking errors on Gmail, etc when returned to reg mode.
Just FYI, I get 2 different secure connection errors:
Gmail: "mail.google.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer)"
Ilines: "Secure Connection Failed An error occurred during a connection to mail.ilines.net. Peer's certificate has an invalid signature. (Error code: sec_error_bad_signature)" -
"Invalid Drive I:\" error during iTunes installation. What do I do now?
Can't install iTunes on my pc. Keep getting "invalid Drive I:\" error.
I have no drive I:\. I have C:, D: and P:(external drive).
I have downloaded iTunes a couple of times but none work.
I am using an HP DV6700 with windows 7.
Help, please.Let's try the following user tip with that one:
"Invalid drive X:\" install errors
Maybe you are looking for
-
Multiple iCloud Accounts on 1 iDevice?
Is it possible to have multiple iCloud accounts active on 1 iDevice at the same time? I know you can have a separate account for purchases, but can you pick and chose what is synced with each account? I have 2 iPhone's (mine, my wife's). We currently
-
Please Help! I don't know why this is happening!
I am playing a game through flash player projector. And one time i was playing and it closed and got deleted. I installed it many times and still the same thing happened. I cleared the data, checked for malware, and closed all programs. None of these
-
Lobby Admin Guest Account with Two Controllers
I have two 5508 WLCs. Both have APs attached to them. If I create a guest account with the lobby administrator on one, will that user account be able to log in to the network if the client is attached to the ohter WLC? So far, I have found that I
-
I want to dowloade an apps with a money but they ask me my security question and I forgot it how can I do
-
Backup fail? factory reset? HELP!?
Hi all, I had to do a factory reset today so I did a backup beforehand. I did the reset to "as a new phone" then I did a second restore "from backup". Problem is that my backup couldnt have worked and I have 2 phone numbers and a random collection of