Invalid User Name and Password after changing the sa Password

Hi All,
I've Installed SAP 9.0 PL 05 ,while installing I've given database details as
User Name : sa
Password : abcd
Installation got success and I could able to log in to listed companies.
But, after I've changed sa user Password in SQL Server
i.e
User Name : sa
Password : xyz
Now , companies are not listed , then I had reset the password in (SAP Business One Service Manager - > Configure Security - > SLD)
When I check after this companies are listing, But
If I try to login with my regular user it is saying
Invalid User Name and Password
for testing purpose I've reset the earlier password for sa and tried., then it is working fine.
does the sa password affecting anywhere?
how can I change my sa password and use normally?
any help or knowledge would be very helpful
Thanks & Regards
M G

Hi,
Please refer SAP note:
1882731 - Cannot Display Company List After Database User Password
Is Changed
Thanks & Regards,
Nagarajan

Similar Messages

Invalid User Name and Password in RCU

I am trying to install SOA 11g in my machine (Windows 7 64 Bit).
I have successfully installed the following
1. JDK (Java 6 Update 45)
2. Oracle XE 10g Database
3. Weblogic Server
While installing RCU, I am facing issue with Invalid User Name and Password. <<Attaching File = RCU_Error.jpg>>
I am able to connect to database using sqlplus (for XE) with user = system. <<Attaching File = sqlplus.jpg>>
Can anyone help on this?

Hi Banerjee,
SOA 11g is not certified or supported with DB 10.2.0.1 so request you to either upgrade the DB to 10.2.0.4 or use 11g DB.
Regards,
Prakash.

I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browers after quiting and restarting after changing the preferences

I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browsers after quitting and restarting after changing the preferences

How about extensions? Perhaps you have an adblock extension installed.
Check Safari > Preferences > Extensions

Problems with invalid user name and password

We have a one week old MacBook 2.2GHz basic white model that is generally working well.
However a problem has now arisen whereby on any attempt to shutdown or restart it won't accept the administrator user name and password, returning an 'invalid' warning. The issue seems to be the user name as the administrator password has worked OK in other situations. Naturally I have checked and re-checked the user name (which was in the form (first name followed by surname in upper and lower case) and it was OK (in any case it was being prompted automatically by the system.)
I have subsequently changed the administrator name (to the form first name only in upper and lower) and the password as suggested by the following article:
http://docs.info.apple.com/article.html?artnum=306876
Nothing has changed. Can anyone help?

HI Martin, a late post to confirm the solution from the last post by using the "RETURN" key works..
(mouse click worked ok in Tiger 10.4.x I thought).
Tis was a delight and so obvious after seeing these symptoms.
I have posted this entry in case anyone else get's into this situation since OSX LEopard 10.5. Several people have encountered this issue where they may have:
• LEopard 10.5.x installed
• have 2 or more active users LOGGED into the OSX system via fast user / fastuser switching
• request a SHUTDOWN or RESTART from an user
• get a OSX request to supply administrator attributed user and it's associated password to validate SHUTDOWN | RESTART request,
• have admin | root account verification failure of password after 'clicking'.
After some months of frustration, it seems a simple PRESS of the "RETURN key" works!
Simply, DON'T mouse click after entering admin user/password.... instead press "RETURN" key.
fwiw.
w

"Invalid user name and password" when synchronizin...

I am getting an "Invalid user name or password" error on E71 after changing password on both Ovi.com web site and in sync profile on E71. Yes, I did make sure to enter the correct password into my ovi.com sync profile on the E71.
E71 Aficionado

I agree. I'm in the same region of the U.S. as you (McLean VA), and I bought the E71 unlocked so I could use my T-Mobile SIM and number with it. Another plus is it works just about anywhere in the world.
As regards software, a lot of it just doesn't work (a la Ovi sync). There are some very nice third party apps, such as Joikuspot (WLAN anywhere) and Goosync (when it works, it's a good Google services sync tool). I am addicted to Comedy 104 on its internet radio application, and Mobbler is a pretty good way to get a last.fm-like experience on the phone.
Shame on Nokia for releasing a not-ready for prime time service, then not supporting it. Very Microsoft-like!
E71 Aficionado

XAI invalid user name and password

Hello,
I am getting the following error when i submit the SOAP request to CC&B, i have changed the all username's and password's fields on XAI Option page to SYSUSER and its corresponding password. still getting the below error, looks like i am doing something wrong , please let me know how to fix it.
this error i am seeing on the tocat
- 2012-10-26 10:55:38,908 [http-6500-2] ERROR (xai.servlet.XAIWSServlet) Invalid user name or password
java.lang.Exception: Invalid user name or password
at com.splwg.xai.servlet.XAIWSServlet.doPost(XAIWSServlet.java:82)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF
Thnaks.

Hi Banerjee,
SOA 11g is not certified or supported with DB 10.2.0.1 so request you to either upgrade the DB to 10.2.0.4 or use 11g DB.
Regards,
Prakash.

I am trying to get into my iCloud account and it is saying invalid user name and password

I am trying to get into my iCloud account and it is saying "Invalid User Name or Password". I thought that you use your Apple I.D. and password, but that does not work! So, how do you reset your user name and/or password if you don't know what ones ICloud is seeking....

After resetting your password you might then need to log out of your account on your device by phone on your id in Settings > Store (Settings > iTunes & App Stores if it's on iOS 6) and then log back in so as to 'refresh' the account on it
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Invalid User Name and Password when logging onto BPM Workspace (v9.3.1)

I have installed Hyperion Planning and the related/required products. When I attemp to log on to Workspace, I get the following message;
'You must supply a valid User Name and Password to log onto the system."
I have tried using the native 'admin' account, and an NTLM account that I have setup. Both of these accounts work for logging onto the the User Management Console and to the Essbase Administration Console, and I have provisioned both of them with full admin privileges.
Has anyone encountered this issue?
Thanks,
-K

Thank you all for the responses so far.
On the first response, I had already provisioned an NTLM user that is a member of the local Administrators group with all administrative roles, and also refreshed security in EAS prior to submitting this inquiry, so that did not solve the problem.
On the second, I cannot navigate to ../workspace/browse/configinfo without logging in so I am unable to review this information.
On the third response, where do you provision the user to BI+? If I open the User Management Console, there are four root roles each with a tree underneath: APS 9.3.1 Server, Analytic Servers, Business Rules, and Hyperion Shared Services. Under each tree, I have provisioned the 'admin' user and the NTLM user for all roles, including Administrator, Dimension Editor and Application Creator under Hyperion Shared Services -> Global Roles. Should there be a BI+ tree? If so, it is not appearing on the list.
Thanks for any additional info anyone can provide.
-Ken

Active Directory "Invalid User name and password" but have joined before

I have had a small handful of machine repeat the same thing. A workstation may still login but with an old PW, it will no longer authenticate to the domain. In times past I have been able to track the edu.kerberos.mit file and the directoryServices perference files. And then rebind the computer to the domain. These computers will begin to rejoin to the domain, but stop at step 3 which is verifying credentials and report and error saying my user name and password is incorrect, but they are correct. Keep in mind it goes through steps 1-3 very quickly. In the logs for Directory Services it tell me _Kerberos does not have a record for the server and it displays our domain controller. Then another right under saying Kpasswd does not have any record of the server. To me this indicates a Kerberos problem and KDC, which I understand runs locally on the machine now with Leopard. Keep in mind a new machine (machine I just imaged) will bind perfect.
Some machines even show still connected to the domain, one I could search via DSCL, but when I went to unbind it gave me a password error.
It seems like a password issue. Any suggestions?

I don't have Vista...
I wonder if this will help:
http://chris.pirillo.com/2007/03/07/file-sharing-from-windows-vista-to-os-x/

After changing the Oracle password - Shared services is not running

Hi All,
I am getting the below error after changed my oracle password.
SharedServices Log:
com.hyperion.hit.registry.exceptions.RegistryException: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-28001: the password has expired
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:213)
     at com.hyperion.hit.registry.RegistryConnection.getInstance(RegistryConnection.java:155)
     at com.hyperion.hit.registry.Registry.getInstance(Registry.java:309)
     at com.hyperion.eie.config.util.xml.XMLUtils.getDBConfigProperties(Unknown Source)
     at com.hyperion.eie.config.util.database.DBProperties.isDBConfigured(Unknown Source)
     at com.hyperion.eie.common.cms.CMSFacade.isCMSInitialized(Unknown Source)
     at com.hyperion.cas.server.CASAppCacheLoader.run(CASAppCacheLoader.java:22)
Caused by: java.sql.SQLException: [Hyperion][Oracle JDBC Driver][Oracle]ORA-28001: the password has expired
     at hyperion.jdbc.base.BaseExceptions.createException(Unknown Source)
     at hyperion.jdbc.base.BaseExceptions.getException(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplConnection.connectAndAuthenticate(Unknown Source)
     at hyperion.jdbc.oracle.OracleImplConnection.open(Unknown Source)
     at hyperion.jdbc.base.BaseConnection.connect(Unknown Source)
     at hyperion.jdbc.base.BaseConnection.setupImplConnection(Unknown Source)
     at hyperion.jdbc.base.BaseConnection.open(Unknown Source)
     at hyperion.jdbc.base.BaseDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(DriverManager.java:525)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at com.hyperion.hit.registry.RegistryUtils.createNewConnection(RegistryUtils.java:203)
     ... 6 more
Attempting to connect to database: Retry Count: 10
Shared Services couldn't be Initialized. The database is either not configured or not running.
Thanks,
PC

Hi John,
After changing the password only, I am getting the Oracle error"[Hyperion][Oracle JDBC Driver][Oracle]ORA-28001: the password has expired" in shared services log.
I changed the password for the schema called "System". But i configured my hyperion system with different schema "Hypconfig".
Thanks,
PC

Invalid user name and password when adding a shared printer from vista

I have the following hardware in our house:
1. A Vista Ultimate
2. A Power Book G4
3. A Netgear RangeMax router
4. A Canon IP2200
The printer is attached to the vista PC by USB.
That PC is attached by ehternet to the router.
The mac is networked to the router by wireless.
Our wireless network is secured by WPA-PSK.
I have set up file and printer sharing on my vista PC and on the mac.
File sharing is working perfectly and can connect to my PC using the windows file sharing protocol (SMB).
I then decided to add my printer as a shared device. I set the printer to shared using my vista PC.
On the mac I opened:
System Preferences > print & faxes > Set Up Printers > add.
I selcted Windows Printing and then Workgroup (my vista PC is on this workgroup)
and then clicked my PC and then Choose.
I then get asked for my Windows Username and Passowrd.
After typing this in I get the follwoing message.
"Unable to connect to server with the provided password and user name.
Error: 256"
I know that my username and password are correct as I add the same printer to my friends XP laptop.
Is this a vista or mac issue or both. I really don't want to have to unplug my printer or copy the file to my PC everytime I want to print something.
I have not tried to add the printer to the mac from a XP compluter and maybe something I need to try.
Sorry for the long post but I really want to sort out this problem.
P.S I have googled for this problem and have come across a mac help forum with the exact smae problem. However no one has a solution.
I hope I can find a solution for me and others having this problem.
Power Book G4 Mac OS X (10.3.9)

I don't have Vista...
I wonder if this will help:
http://chris.pirillo.com/2007/03/07/file-sharing-from-windows-vista-to-os-x/

UCCX login failed invalid user name and password

Dear all,
Recently I removed the Ldap sync and re-established it back but after this I am unable to login into the
uccx appadmin page but am able to login into os admin page, when i checked in uccx service list
uxl and axl service is not running
can any one guide me?

Hi Abdul,
When you are able to see the UXL and the AXL service on the UCCX Serviceability, then I think you are running 8.5.1.10000-37 which is the UCCX 8.5.1 base version.
The UCCX AXL web Service and UXL web service has no impact on the Services and was imported from the VOS platform during the initial development of UCCX 8.x. This has no relation to the AXL integration with the CUCM.
To re-establish the AXL connectivity the only workaround is to use the CET tool or modify a file in root to trick the Appadmin to go to the Fresh install stage. Once done, the re-association of the administrators can be done.
Note: This can be done only by TAC as it involves remote account access.
Secondly, from UCCX 9.x, we have the Super User which is independent of AXL/CUCM and hence will be able to login to UCCX at all times.
Regards,
Arundeep

I've changed my last name and want to change the details in my .mac account. Any ideas?

I've recently changed my last name and although I've created an alias (now @icloud.com sadly instead of @mac or @me!) I can't figure out how to change my name so that the 'sender' name reflects my name change. Any help gratefully received! Just one of the many tasks I need to complete to change my name and not off to a good start!

Hey Newgirl85,
Thanks for using Apple Support Communities.
After reviewing your post, it sounds like you need to change the name on your Apple ID. Sending email with the wrong name can be a frustrating situation for sure. You can update your name at https://appleid.apple.com/ .
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
How do I change my Apple ID Name or personal information?
You can change your Apple ID Name at My Apple ID. Click on Manage your Apple ID and sign in with your Apple ID name and password. Click Edit and enter the new information, then click Save Changes. Changes take effect immediately. You can also use My Apple ID to change your personal information, such as your mailing address or email address. See Changing the name you use for your Apple ID if you'd like more information.
iCloud: Create or change email aliases
http://support.apple.com/kb/PH2622
Have a nice day,
Mario

HTHM code iWeb "META NAME and SEARCH" Want change the code

The source HTML from my front page, can i change HTML code "META NAME" and META SEARCH"
i want erase #1 only this and change like exemple #2 Thanks to helm me.
<head>
#1<meta name="Generator" content="iWeb 2.0.4" />
<meta name="iWeb-Build" content="local-build-20090713" />
<meta name="viewport" content="width=900" />
<title>intro</title>
#2 <head>
<title>videos voyage, escapademedia</title>
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1" />
<meta name="Keywords" content="escapade, voyage, voyager, monde, circuits, Inde, Chine, Vietnam, Orient, Asie, Bali, esprit, Tibet, tibétain, monastère, méditation, relaxation, Java, passeport, Inde sacrée, Delhi, billeterie, consultation, monde, itinéraire, Bangkok, temps, projets, dépaysement" />
<meta name="Description" content="escapade, pour voir, sentir, goûter, entendre et toucher le bout du monde; Pour voyager autrement..." />
<meta name="Author" content="www.escapade.com" />
<meta name="ROBOTS" content="INDEX,FOLLOW" />
<meta name="language" content="fr" />
<meta name="revisit-after" content="10 days" />
<meta name="rating" content="General" />
<meta name="category" content="Travel Agency" />

Hello Zorig,
>>I want to generate the column as BillingAddress and ShippingAddress
After you added the Address type in the ApplicationUser entity, the Entity Framework would build a 1-1…0 relationship between two entities, you could use the ForeignKey attribute to specify the generated foreign key column name, if your ApplicationUser and
Address have a one…zero to many relationship.
public class ApplicationUser
[Required]
public int SippingAddressID { get; set; }
[Required]
[ForeignKey("SippingAddressID ")]
public Address ShippingAddress { get; set; }
[Required]
public int BillingAddressID { get; set; }
[Required]
[ForeignKey("BillingAddressID ")]
public Address BillingAddress { get; set; }
public int ApplicationUserID { get; set; }
public string FirstName { get; set; }
public string LastName { get; set; }
If they are one..zero to one relationship, in EF, this kind relationship is implemented by mapping primary key, in your case, we cannot specify one primary property to map to two different columns in database.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I require a password to change the "Require password after sleep or screen saver begins" setting

My son has a habit of disabling the "Require password after sleep or screen saver begins" setting whenever my wife lets him play a game on her account. I notice every other setting on the "Security & Privacy -> General" tab is protected by the lock on the lower left corner. I've never understood why this one is not. Is there any way that I can get that setting to also be controlled by the lock?

Because that setting is specific to the account currently logged in and doesn't potentially affect any others or the system itself, which is the level in general at which administrator or root access is required.
(82759)

Invalid User Name and Password after changing the sa Password

Similar Messages

Maybe you are looking for