Invalid Username and password ....while login in workspace

error"you must supply a valid user name and password to log on the system." I have provisioned properly in shared services and also configured web server ..but while trying to login in workspace,getting error"you must supply a valid user name and password to log on the system."

You might want to try bouncing Shared Services and Workspace.
I occassionally have trouble with my VM if I don't shut down properly.
Regards,
Cameron Lackpour

Similar Messages

Oracle Discoverer 4i - Invalid username and password

Hi,
I have 2 machines, both installed with Oracle Discoverer 4i with patches, 3201601, 2451630, 3622870.
When I run the Desktop Discoverer and attempt to log in, one machine prompts the error Invalid username and password while the other does not.
Can someone help me troubleshoot why this error occurs? It will be big help.
Thanks!

Are you trying to connect to the same database from both Discoverer machines ? Are the OS versions on those two machines identical ? Pl post the exact error code/message ?
HTH
Srini

AD SSO Agent Login (Invalid username and password)

Hello;
I updated my NAC from 4.7.1 to 4.8.0 and so far i had some hicckups but I am getting over them.. One of the issue I am facing right now is that no one cannot login to the NAC they all are comnig back as Invalid username and password. I need some help here if anyone have ever run into this problem before.
I have check the AD SSO and it is started...
Thanks
Joel

HI Faisal,
I'm getting the same exact error. Which AD account had a bad password?
Thanks,
John

01017 invalid username and password in toad

Hi,
I am getting '01017-invalid username and password logon denied' error when connecting via toad. but with same userid and password, I am able to connect via sql plus. Pleaase let me know how to resolve this issue.
Regards,
Abirami

Hi again,
Did I understand correctly the following :
1) The database you are trying to access is in fact a clone of the production database and it is in the clone database that you get the error ?
Yes facing the error in clone database only.
2) When you said the user/password worked fine the previous day I assume you mean it worked fine on the source database , not on the clone database ?
It was the clone only (Not the production)
3) So, in fact you have never been able to access the clone database with this userid ?
The user id were able to login yesterday and not today(This the cloned one)
4) I also assume that the original user still works fine when accessing the source database ?
Yes
If I have understood correctly all these things then I think we need to understand the cloning process. How exactly do you clone the database ?
1. Taken the control file trace and shutdown the source db.
2. Copied the cold backup from target to source destination.
3. moved the controlfile to other location (in source).
4. started with
startup nomount (source)
i have run the script that was taken trace( I have done crosschecking of all datafiles with production for your information)
create controlfile set database <name> resetlogs noarchivelog
controlfile got created
alter database open resetlogs.
thats it.
Regards
Pramodh

Invalid username and password combination woes

Before I do what I think I am supposed to do... I wanted to run this by you guys first to make sure incase someone found a way. I wish i didn't have to do this but...
I have a Mac on our domain running 10.6.6. It had a seizure of some kind and i was forced to cold boot it. We got it back up and running and to the login screen, but when we tried logging in to it, the login in screen just shook. No matter what AD account i tried logging in with, SHAKE! SHAKE! SHAKE The next thing i decided to do was unbind and rebind the Mac thinking maybe it had something to do with that. NO GOOD. Not only did I get an error that the Mac could not unbind from our domain, but now, no matter what account i use to try and rebind the mac, I get the dreaded: invalid username and password combination error. WHEN I KNOW THAT'S NOT THE CASE!
Anyone know how to fix this OTHER THAN downgrading to a version of 10.6.x that CAN bind? If that's even a option???
Thanks!

Why is that always any Apple support person or Mac users answer? It's a Microsoft problem. How can it be, I have 20 macs connected to the same network. The mac having the problem has been successfully working for 3 months. It started shaking when the user came in and in the troubleshooting process we removed it and are trying to rejoin it backl on to a domain it has been working on for months and 19 other machines are still working on. How is this a microsoft problem? Please enlightne me? If it sounds like I am frustrated, I apologize, but I AM!

Invalid username and password; logon denied

Hi
I have a CentOS VM(Linux) with Oracle database 11.2 already installed by someone. I want to use this database to install FMW component.
I am unable to login to database with sys user. Below is the procedure I am trying to login to DB.
*$ sqlplus /nolog*
SQL Plus Release: 11.2.0.1...
SQL>conn sys/password@orcl as sysdba;
ERROR:
ORA-01017: Invalid username and password; logon denied
then i issued the below commands ans realised that DB is not started.
SQL> SELECT FROM DUAL*
SP2:0640 NOT CONNECTED.
SQL> Startup;
ORA-03135: Connection lost contact.
But I am able to login to DB as sys with out providing instance name(orcl in this case)
*$ sqlplus /nolog*
SQL Plus Release: 11.2.0.1...
SQL>conn sys/password as sysdba;
Can someone let me know how to set password for sys user for orcl instance.
TiA

try to connect as
$export ORACLE_SID=orcl
$sqlplus / as sysdba
Even then if you are not able to login.
show the tnsping output and listener status .
also check the sqlnet.authentication parameter in sqlnet.ora file.
Post the above mention details ..
--neeraj

Invalid Username and Password on 10.7 SMB shares

Getting "Invalid Username and Password" message when connecting to SMB shares hosted off a Mac OS 10.7 Lion machine from Snow Leopard or other OSes? Even though you know you are using the correct username and password? With the new SMB in OS X 10.7 Lion you now have to specify the name of the computer your connecting to IN the username field of the prompt or else it won't connect. Kind of like Windows. Took me a while to figure this out so I figured I'd post this here.
i.e.
instead of:
Use:

Thanks for all of your advices. I want to say:
1. I just created this new database yesterday and created SYS password during database creation from another clinet machine in my office. All connections are working. This is why I don't want to change the password at this moment. If I re-create password file, will this affect another client machine in office to connect to DB as sysdba?
2. From server, I can connect. I used the same sys/syspassword as sysdba. If the password is wrong, I would not be able to connect from server.
3. When I tried to connect from remote client machine, I do connect with string like: SQL:> conn sys/syspassword@mydb as sysdba. But it didn't work and return ORA-01017 error.
4. I have other 4 databases on different servers. I can connect from the same remote client machine through SQLPLUS and TOAD with sys as sysdba and system.
Please advise more. Thanks.

Why do my firewalls only use the domain username and password for login and enable passwords, not a different enable password like my switches do? The RADIUS config looks the same...

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
Issue:
Cisco firewalls require only one level of password i.e. the domain username and password are used for both logging in as well as reaching global configuration mode.
Background:
We have multiple Cisco network devices set up which authenticate to our Windows domain controller using NPS (Windows 2008 R2). The switches we have set up all function exactly as we would hope as they require your domain username and password to login to the device. They then require a separate password when you use the enable command, this is stored in Active Directory:
Switches:
Username:domain-username
Password:domain-password
SWITCH>enable
Password:enable-password-in-Active-Directory
SWITCH#
Firewalls (as they currently are):
Username:domain-username
Password:domain-password
FIREWALL>enable
Password:domain-password
FIREWALL #
With the firewalls however, they require your domain username and password first, and then your domain password again when using the enable command. I want the firewalls to use the enable level password that the switches currently use instead of the domain password again. The current configuration look like the following:
Current switch configuration:
aaa new-model
aaa authentication login default group radius local
aaa authentication enable default group radius enable
aaa authorization exec default group radius local
aaa session-id common
radius-server host 192.168.0.1 auth-port 1645 acct-port 1646
radius-server source-ports 1645-1646
radius-server key 7 1234abcd
Current firewall configuration:
aaa-server DC01 protocol radius
aaa-server DC01 (outside) host 192.168.0.1
aaa authentication ssh console DC01 LOCAL
aaa authentication enable console DC01 LOCAL
key 1234abcd
Any help would be great, thanks!

Cisco ASA works that way by design. You could remove "aaa authentication enable" and then you could use the "enable password" command to set your enable password.
But if you do that, then ASA would change your username to "enable_15". That would break Authorization and Accounting if you're using them. Let me clarify with an example
Firewalls :
Username:domain-username
Password:domain-password
FIREWALL>show curpriv
Username : domain-username
Current privilege level : 1
Current Mode/s : P_UNPR
FIREWALL>enable
Password:enable-password-from-running-config
FIREWALL #show curpriv
Username : enable_15
Current privilege level : 15
Current Mode/s : P_PRIV
If you're using Authorization and Accounting it's recommended to stick with your current behavior.

Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

Why is it that I can't sign in on facetime, but I can sign in on app.store? With facetime,I'm getting an error, invalid username and password eventhough I have typed exactly the same when I'm signing in on the app.store. pls.help, thanks

1. Make sure software is up to date
2. Make sure FaceTime is enabled; Settings>FaceTime
3. Make sure Date and Time is correctly set; Settings>General>Date and Time>Set Automatically>On
4. Make sure Push Notification is enabled
5. Make sure phone number or email address is correct
6. Hold the Sleep and Home button down (together) until you see the Apple Logo

Unable to connect to 11.5.10 vision instance Invalid username and password

where using applications11.5.10.2 vision instance. We were able to connect to the database using sqlplus which means there must be nothing wrong with our connectivity. I've tried to logon to the applciations using the defauilt password w/c is operations/welcome.When I try to logon using ADI its giving me an error " Could not connect to the database Invalid Username and Password"
GWYUID: applsyspub/pub
FNDNAME:apps
I'm also using the latest version of ADI w/c is 7.2.4.10.27.
need help please on how to connect ADI to the Application
THanks,
Chase

Check with your sysadmin. They may have setup a Server ID, which you will need to introduce to your database definition to complete the signon process.

Why can't I access my credit union account anymore on my laptop? I enter username and password and it says invalid username and password!

The trouble opening my credit union account just started yesterday and it was usable the day before. I enter my username and password and the next window tries to open my account but ends up on a page that reads invalid username and password! What has happened to my settings? Can anyone relate or help me?

My first approach would be to see if your credit union changed their web site. If nothing has changed on your computer then it must be at their end. If they say they have changed nothing then you can start looking at your computer settings.
One small worrying item. How did you come to try to log into them? Never use a link in an unsolicited e-mail telling you to log in. Those often go to bogus sites trying to steal your identity that are almost perfect imitations of the real site, and will, of course, not actually log you into the real site. I always check web addresses in my browser's status bar.

Re: Invalid username and password when logging onto Hyperion workspace

Hi,
I have installed Hyperion Reporting and Analysis services.When I attempt to log on to Workspace, I get the following message;
'You must supply a valid User Name and Password to log onto the system."
I have tried using the admin and password as username and password.I am able to login to Essbase Administration Services and User Management Console using this account.I have provisioned the user to Hyperion System 9 BI+ .
Thanks in advance.
-Sowmya

I was told that Dsun.net.inetaddr.ttl=0" is required to be passed to the web application server (JVM) that starts Hyperion Shared Services and all System 9 products that depend on Hyperion Shared Services
Is this correct? I see these errors in the log when I try to log into Workspace in the morning:
2010-03-24 08:26:03,509 [[ORB=_it_orb_id_1,Pool=1]::id-12] WARN com.hyperion.css.spi.impl.ldap.LDAPProvider.authenticate(Unknown Source) - javax.naming.ServiceUnavailableException: ldaps.lirr.org:636; socket closed; remaining name ''

Google Talk for Blackberry login failure, invalid username and password

Hi Folks,
I have a new 8520 Curve from which I cannot seem to log into Google Talk using the gtalk for Blackberry application. I have absolutely no problems logging into the service with applications from Google such as Voice, however the Google Talk by RIM is failing. I have tried with both my standard gmail account and my business Google Apps account with no success.
Here is what is happening.
Start Google Talk
I type in my username
I type in my password
I select Remember Password
I select Automatically Sign me in
I push Sign In
The Sign in Fails with "Username and Password do not Match. You Provided ([email protected])."
I really honestly know my password, and have even signed into google services from this very phone in past few minutes so something else is going on.

It is half a year later and I have EXACTLY the same problem.
Why can this app not be fixed?

Ask for Username and Password while Opening an Applet

Can we code such a way that , While we open an Applet , It should ask for User and password and upon sucessful validation , the Main applet must be loaded !
Any Suggestions Please !
Thanks .....

public class FirstApplet extends Applet {
     private boolean authentified = false;
     private SecondApplet applet = null;
     public void init() {
          System.out.println("FirstApplet: init()");
          authentified=authentificate();
     public void start() {
          System.out.println("FirstApplet: start() "+authentified);
          if (authentified==true) {
               applet=new SecondApplet();
               applet.init();
               applet.start();
     public void stop() {
          System.out.println("FirstApplet: stop()");
          if (applet!=null) applet.stop();
     public void destroy() {
          System.out.println("FirstApplet: destroy()");
          if (applet!=null) applet.destroy();
     private boolean authentificate() {
          System.out.println("FirstApplet: authentificate()");
          // ask the user for username and password
          // check the password, if it's ok, return true
          // if it's not okay, return false
          // how to do a login window, see
          // http://www.codeguru.com/java/articles/510.shtml
          return true;
}

Help !! i can't use this username and password to login

i used your "password finder" tool to find my username and pwd. i use the username / pwd that you sent to my mail box to login on the following page:
http://www.oracle.com/admin/account/index.html
system prompted Invalid login.

Thank you for requesting your account information.
Please use the following Username and Password to access the following services:
Oracle.com... http://www.oracle.com
Oracle Technology Network... http://technet.oracle.com
Oracle Applications Network... http://appsnet.oracle.com
Oracle E-Business Network... http://www.oracle.com/ebusinessnetwork
Oracle Learning Network... http://www.oracle.com/education/oln
Username: [email protected]

PEI to save username and password on login

Hi,
I need to replace the functionality that was in 4.5 to pass the username and password for authenticating to other systems, while using "Remember My Password". This functionality was removed from 5.x without a workaround. Support has recommened posting here, to see if anyone has done this. They recommended righting a custom PEI to capture and store the information.
Any help would be appreciated.
Thanks
Rick

Akash, I think the fundamental problem is that, in 5.0, if "Remember my password" is used, the portal does not actually ever get the password (kind of a misnomer: it would be better called, "Don't prompt me for login"), and therefore can not pass it to portlets any way.
I do know that some customers have implemented PEIs to store the password in a browser cookie alongside the new 5.0 session cookie (which is how 4.5 implemented "remember my password": it actually remembered the password, which was less secure than the 5.0 mechanism) and read it back into the portal.

Invalid Username and password ....while login in workspace

Similar Messages

Maybe you are looking for